PPT ON SINGLE MINUTE EXCHANGE OF DIES (SMED)
•
5 likes•8,124 views
SMED (Single-Minute Exchange of Dies) is a system for reducing equipment changeover time in manufacturing. The essence of the SMED system is to convert as many changeover steps as possible to “external” (performed while the equipment is running), and to simplify and streamline the remaining steps. SMED – It is a method of reducing time in total equipment changeover. SMED is the term used to represent the Single Minute Exchange of Die or setup time that can be counted in a single digit of minutes. Its goal is to reduce the setup time from hours down to less than 10 minutes It provides a rapid and efficient way of converting a manufacturing process from running the current product to running the next product.
Report
Share
Report
Share
Download to read offline
Recommended
Single Minute Exchange of Dies (SMED)
How to reduce the losses which we create during the switching of two jobs in a same machine or losses while switching of Dies
SMED - Quick Change Over
Download the presentation together with train-the-trainer guide and workshop templates at http://wcm.nu
This presentation is made by Oskar Olofsson, WCM Consulting AB
Make changes in the background template if you want to change the appearance
Lean Quick Changeover (SMED) Training Module
The Lean Quick Changeover (SMED) Training Module v2.0 includes:
1. MS PowerPoint Presentation including 65 slides covering an Introduction to Lean Management, The Seven Lean Wastes, Lean Kaizen Events, and a Step-by-Step Changeover Time Reduction (SMED) Process.
2. MS Excel Changeover Time Analysis Worksheet Template
LEAN SMED TRAINING FOR SUPERVISORS AND OPERATORS
LEAN (SINGLE MINUTE EXCHANGE DIE) SMED TRAINING FOR OPERATORS / SUPERVISORS
Recommended
Single Minute Exchange of Dies (SMED)
How to reduce the losses which we create during the switching of two jobs in a same machine or losses while switching of Dies
SMED - Quick Change Over
Download the presentation together with train-the-trainer guide and workshop templates at http://wcm.nu
This presentation is made by Oskar Olofsson, WCM Consulting AB
Make changes in the background template if you want to change the appearance
Lean Quick Changeover (SMED) Training Module
The Lean Quick Changeover (SMED) Training Module v2.0 includes:
1. MS PowerPoint Presentation including 65 slides covering an Introduction to Lean Management, The Seven Lean Wastes, Lean Kaizen Events, and a Step-by-Step Changeover Time Reduction (SMED) Process.
2. MS Excel Changeover Time Analysis Worksheet Template
LEAN SMED TRAINING FOR SUPERVISORS AND OPERATORS
LEAN (SINGLE MINUTE EXCHANGE DIE) SMED TRAINING FOR OPERATORS / SUPERVISORS
PPT Presentation on IATF 16949 Documentation
Global Manager Group has prepared presentation to provide information regarding documentation requirements for revised IATF 16949:2016 Certification. It described all primary documents like manual, procedures, plans, audit checklist, etc in details.
For further information about IATF 16949:2016 documentation requirements visit @ https://www.globalmanagergroup.com/
Implementation Of TPM with Case study
The purpose of this paper is to evaluate the contributions of Total Productive Maintenance (TPM) initiatives in reducing equipment breakdowns, increase equipment reliability and improve productivity. This will result in increased equipment utilization and life, reduced work stoppages and machine slowdowns, closer adherence to production and delivery schedules as well as increased employee morale. The Total Productive Maintenance (TPM) concept addresses these goals. The aim of TPM is to keep the plant and equipment at its highest productive level through the cooperation of all areas of the organization. TPM is a partnership between maintenance and production organization to improve product quality, reduce waste, reduce manufacturing cost and increase equipment availability.
The SMED Method by CLT Services
This is, I am sure, the best presentation about the SMED method. It supports our training course on SMED. For more information call us on: (+351)936.000.079
Best regards,
João Paulo Pinto.
www.cltservices.net
7 QC TOOLS PRESENTATION PPT
The Seven Basic Tools of Quality (also known as 7 QC Tools) originated in Japan when the country was undergoing major quality revolution and had become a mandatory topic as part of Japanese’s industrial training program. These tools which comprised of simple graphical and statistical techniques were helpful in solving critical quality related issues. These tools were often referred as Seven Basics Tools of Quality because these tools could be implemented by any person with very basic training in statistics and were simple to apply to solve quality-related complex issues.
How to implement Single minute exchange of die
Phases of SMED and examples of SMED. Stepwise implementation of SMED
Lean Manufacturing
“Lean” is a management philosophy based on the Toyota Production System (TPS). With Lean Manufacturing, you will be able to enhance value for your customers by improving and smoothing the process flow and eliminating waste. Simply put, with Lean, you will be able to increase productivity and create greater customer value with less resources.
By teaching this presentation, managers and employees will have a better understanding of the Lean principles and approach to eliminating waste, and will be more forthcoming to lead and participate in the Lean implementation process.
LEARNING OBJECTIVES
1. Acquire knowledge on the key concepts and principles of Lean
2. Describe the common Lean methods and tools for waste elimination and value creation
3. Describe the key roles in Lean deployment
4. Define the success factors for sustaining a Lean culture
CONTENTS
1. Introduction to Lean Manufacturing
2. Key Concepts of Lean
3. Lean Methods & Tools
4. Lean Roles
5. Sustaining a Lean Culture
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
PROCESS FAILURE MODE EFFECTS ANALYSIS (PFMEA) PPT
A Process Failure Mode Effects Analysis (PFMEA) is a structured analytical tool used by an organization, business unit, or cross-functional team to identify and evaluate the potential failures of a process. PFMEA helps to establish the impact of the failure, and identify and prioritize the action items with the goal of alleviating risk. It is a living document that should be initiated prior to process of production and maintained through the life cycle of the product.
PFMEA evaluates each process step and assigns a score on a scale of 1 to 10 for the following variables:
Severity — Assesses the impact of the failure mode (the error in the process), with 1 representing the least safety concern and 10 representing the most dangerous safety concern. In most cases, processes with severity scores exceeding 8 may require a fault tree analysis, which estimates the probability of the failure mode by breaking it down into further sub-elements.
Occurrence — Assesses the chance of a failure happening, with 1 representing the lowest occurrence and 10 representing the highest occurrence. For example, a score of 1 may be assigned to a failure that happens once in every 5 years, while a score of 10 may be assigned to a failure that occurs once per hour, once per minute, etc.
Detection — Assesses the chance of a failure being detected, with 1 representing the highest chance of detection and 10 representing the lowest chance of detection.
RPN — Risk priority number = severity X occurrence X detection. By rule of thumb, any RPN value exceeding 80 requires a corrective action. The corrective action ideally leads to a lower RPN number.
WORLD CLASS MANUFACTURING (WCM) PRESENTATION
Manufacturing has evolved considerably since the advent of industrial revolution. In current global and competitive age, it is very important for organization to have manufacturing practice which is lean, efficient, cost-effective and flexible.
World class manufacturing is a collection of concepts, which set standard for production and manufacturing for another organization to follow. Japanese manufacturing is credited with pioneer in concept of world-class manufacturing. World class manufacturing was introduced in the automobile, electronic and steel industry.
Line balancing and its formulation
Line balancing and how the productivity can be optimized through the help of formula and by working of 4Ms
How to reduce changeover loss
In any SME manufacturing organizations, one of the major causes for low plant utilization is changeover loss.In this presentation, using SMED methodology, step by step process is given to reduce the changeover loss.Also shared the real examples of changeover loss reduction in various manufacturing industries using SMED concept.Hope this is useful for any organization struggling with low plant utilisation due to changeover loss..
TPM. DR. K. BARANIDHARAN
Total Quality Managment - TPM - final year B.E.cs - Presented by DR. K. BARANIDHARAN, SAIRAM INSTITUTE OF MANAGMENT STUDIES (sims) SRI SAI RAM INSTITUTE OF TECHNILIGY (sit) CHENNAI
TPM 8 Pillars
The presentation gives a brief explanation about the 8 pillar of TPM.It is medical science of machines.TPM focuses on maintenance as a necessary and vitally important part of the business. It is no longer regarded as a non-profit activity. The goal is to hold emergency and unscheduled maintenance to a minimum.
TOYOTA PRODUCTION SYSTEM (TPS) PRESENTATION
The Toyota Production System (TPS) is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers. The system is a major precursor of the more generic "lean manufacturing". Taiichi Ohno and Eiji Toyoda, Japanese industrial engineers, developed the system between 1948 and 1975.
Originally called "just-in-time production", it builds on the approach created by the founder of Toyota, Sakichi Toyoda, his son Kiichiro Toyoda, and the engineer Taiichi Ohno. The principles underlying the TPS are embodied in The Toyota Way.
WORK STUDY TIME AND MOTION STUDY PRESENTATION
Work study may be defined as the analysis of a job for the purpose of finding the preferred method of doing it and also determining the standard time to perform it by the preferred (or given) method. Work study, therefore, comprises of two areas of study: method study (motion study) and time study (work measurement).
Role of Work Study in Improving Productivity
In order to understand the role of work study, we need to understand the role of method study and that of time study.
Method study (also sometimes called Work Method Design) is mostly used to improve the method of doing work. It is equally applicable to new jobs. When applied to existing jobs and existing jobs, method study aims to find better methods of doing the jobs that are economical and safe, require less human effort, and need shorter make-ready / put-away time. The better method involves the optimum use of best materials and appropriate manpower so that work is performed in well organized manner leading to increased resource utilization, better quality and lower costs.
More Related Content
What's hot
PPT Presentation on IATF 16949 Documentation
Global Manager Group has prepared presentation to provide information regarding documentation requirements for revised IATF 16949:2016 Certification. It described all primary documents like manual, procedures, plans, audit checklist, etc in details.
For further information about IATF 16949:2016 documentation requirements visit @ https://www.globalmanagergroup.com/
Implementation Of TPM with Case study
The purpose of this paper is to evaluate the contributions of Total Productive Maintenance (TPM) initiatives in reducing equipment breakdowns, increase equipment reliability and improve productivity. This will result in increased equipment utilization and life, reduced work stoppages and machine slowdowns, closer adherence to production and delivery schedules as well as increased employee morale. The Total Productive Maintenance (TPM) concept addresses these goals. The aim of TPM is to keep the plant and equipment at its highest productive level through the cooperation of all areas of the organization. TPM is a partnership between maintenance and production organization to improve product quality, reduce waste, reduce manufacturing cost and increase equipment availability.
The SMED Method by CLT Services
This is, I am sure, the best presentation about the SMED method. It supports our training course on SMED. For more information call us on: (+351)936.000.079
Best regards,
João Paulo Pinto.
www.cltservices.net
7 QC TOOLS PRESENTATION PPT
The Seven Basic Tools of Quality (also known as 7 QC Tools) originated in Japan when the country was undergoing major quality revolution and had become a mandatory topic as part of Japanese’s industrial training program. These tools which comprised of simple graphical and statistical techniques were helpful in solving critical quality related issues. These tools were often referred as Seven Basics Tools of Quality because these tools could be implemented by any person with very basic training in statistics and were simple to apply to solve quality-related complex issues.
How to implement Single minute exchange of die
Phases of SMED and examples of SMED. Stepwise implementation of SMED
Lean Manufacturing
“Lean” is a management philosophy based on the Toyota Production System (TPS). With Lean Manufacturing, you will be able to enhance value for your customers by improving and smoothing the process flow and eliminating waste. Simply put, with Lean, you will be able to increase productivity and create greater customer value with less resources.
By teaching this presentation, managers and employees will have a better understanding of the Lean principles and approach to eliminating waste, and will be more forthcoming to lead and participate in the Lean implementation process.
LEARNING OBJECTIVES
1. Acquire knowledge on the key concepts and principles of Lean
2. Describe the common Lean methods and tools for waste elimination and value creation
3. Describe the key roles in Lean deployment
4. Define the success factors for sustaining a Lean culture
CONTENTS
1. Introduction to Lean Manufacturing
2. Key Concepts of Lean
3. Lean Methods & Tools
4. Lean Roles
5. Sustaining a Lean Culture
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
PROCESS FAILURE MODE EFFECTS ANALYSIS (PFMEA) PPT
A Process Failure Mode Effects Analysis (PFMEA) is a structured analytical tool used by an organization, business unit, or cross-functional team to identify and evaluate the potential failures of a process. PFMEA helps to establish the impact of the failure, and identify and prioritize the action items with the goal of alleviating risk. It is a living document that should be initiated prior to process of production and maintained through the life cycle of the product.
PFMEA evaluates each process step and assigns a score on a scale of 1 to 10 for the following variables:
Severity — Assesses the impact of the failure mode (the error in the process), with 1 representing the least safety concern and 10 representing the most dangerous safety concern. In most cases, processes with severity scores exceeding 8 may require a fault tree analysis, which estimates the probability of the failure mode by breaking it down into further sub-elements.
Occurrence — Assesses the chance of a failure happening, with 1 representing the lowest occurrence and 10 representing the highest occurrence. For example, a score of 1 may be assigned to a failure that happens once in every 5 years, while a score of 10 may be assigned to a failure that occurs once per hour, once per minute, etc.
Detection — Assesses the chance of a failure being detected, with 1 representing the highest chance of detection and 10 representing the lowest chance of detection.
RPN — Risk priority number = severity X occurrence X detection. By rule of thumb, any RPN value exceeding 80 requires a corrective action. The corrective action ideally leads to a lower RPN number.
WORLD CLASS MANUFACTURING (WCM) PRESENTATION
Manufacturing has evolved considerably since the advent of industrial revolution. In current global and competitive age, it is very important for organization to have manufacturing practice which is lean, efficient, cost-effective and flexible.
World class manufacturing is a collection of concepts, which set standard for production and manufacturing for another organization to follow. Japanese manufacturing is credited with pioneer in concept of world-class manufacturing. World class manufacturing was introduced in the automobile, electronic and steel industry.
Line balancing and its formulation
Line balancing and how the productivity can be optimized through the help of formula and by working of 4Ms
How to reduce changeover loss
In any SME manufacturing organizations, one of the major causes for low plant utilization is changeover loss.In this presentation, using SMED methodology, step by step process is given to reduce the changeover loss.Also shared the real examples of changeover loss reduction in various manufacturing industries using SMED concept.Hope this is useful for any organization struggling with low plant utilisation due to changeover loss..
TPM. DR. K. BARANIDHARAN
Total Quality Managment - TPM - final year B.E.cs - Presented by DR. K. BARANIDHARAN, SAIRAM INSTITUTE OF MANAGMENT STUDIES (sims) SRI SAI RAM INSTITUTE OF TECHNILIGY (sit) CHENNAI
TPM 8 Pillars
The presentation gives a brief explanation about the 8 pillar of TPM.It is medical science of machines.TPM focuses on maintenance as a necessary and vitally important part of the business. It is no longer regarded as a non-profit activity. The goal is to hold emergency and unscheduled maintenance to a minimum.
What's hot (20)
More from Inter Alliance Werardt
TOYOTA PRODUCTION SYSTEM (TPS) PRESENTATION
The Toyota Production System (TPS) is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers. The system is a major precursor of the more generic "lean manufacturing". Taiichi Ohno and Eiji Toyoda, Japanese industrial engineers, developed the system between 1948 and 1975.
Originally called "just-in-time production", it builds on the approach created by the founder of Toyota, Sakichi Toyoda, his son Kiichiro Toyoda, and the engineer Taiichi Ohno. The principles underlying the TPS are embodied in The Toyota Way.
WORK STUDY TIME AND MOTION STUDY PRESENTATION
Work study may be defined as the analysis of a job for the purpose of finding the preferred method of doing it and also determining the standard time to perform it by the preferred (or given) method. Work study, therefore, comprises of two areas of study: method study (motion study) and time study (work measurement).
Role of Work Study in Improving Productivity
In order to understand the role of work study, we need to understand the role of method study and that of time study.
Method study (also sometimes called Work Method Design) is mostly used to improve the method of doing work. It is equally applicable to new jobs. When applied to existing jobs and existing jobs, method study aims to find better methods of doing the jobs that are economical and safe, require less human effort, and need shorter make-ready / put-away time. The better method involves the optimum use of best materials and appropriate manpower so that work is performed in well organized manner leading to increased resource utilization, better quality and lower costs.
CONCEPT GENERATION AND SELECTION PRESENTATION
Product conceptualization is regarded as a key activity in new product development (NPD). In this stage, product concept generation and selection plays a crucial role. This paper presents a product concept generation and selection (PCGS) approach, which was proposed to assist product designers in generating and selecting design alternatives during the product conceptualization stage. In the PCGS, general sorting was adapted for initial requirements acquisition and platform definition; while a fuzzy c-means (FCM) algorithm was integrated with a design alternatives generation strategy for clustering design options and selecting preferred product concepts. The PCGS deliberates and embeds a psychology-originated method, i.e., sorting technique, to widen domain coverage and improve the effectiveness in initial platform formation. Furthermore, it successfully improves the FCM algorithm in such a way that more accurate clustering results can be obtained. A case study on a wood golf club design was used for illustrating the proposed approach. The results were promising and revealed the potential of the PCGS method.
LINE BALANCING PRESENTATION PPT
Line Balancing is leveling the workload across all processes in a cell or value stream to remove bottlenecks and excess capacity. A constraint slows the process down and results if waiting for downstream operations and excess capacity results in waiting and no absorption of fixed costs.
Match the production rate after all wastes have been removed to the Takt time at each process of the value stream.
ROOT CAUSE ANALYSIS PRESENTATION
Root cause analysis (RCA) is a method of problem solving used for identifying the root causes of faults or problems. A factor is considered a root cause if removal thereof from the problem-fault-sequence prevents the final undesirable event from recurring; whereas a causal factor is one that affects an event's outcome, but is not a root cause. Though removing a causal factor can benefit an outcome, it does not prevent its recurrence with certainty.
AUTONOMOUS MAINTENANCE PRESENTATION
When companies begin to implement Total Productive Maintenance (TPM) they often start by piloting Autonomous Maintenance (AM). This is understandable as AM is one of the key distinguishing features of TPM and also one of the most important activities when understood correctly. To understand AM correctly it needs to be seen as an improvement activity within TPM, rather than production teams taking on maintenance activities.
In the evolution of TPM in Japan, AM grew out of the 5S activities of production teams, as they found that in order to deal with barriers to Quality, Delivery and particularly Cost performance they needed to improve equipment conditions, initially by applying the principles of 5S and QC circles. AM was not the result of a desire to reduce maintenance costs or maintenance departments wishing to hand tasks over to production, rather it was the result of production teams wishing to control and improve their equipment.
PPT ON THE ADVANCED MANAGEMENT AND PLANNING TOOLS
Post 2000, a robust project planning and execution has become key for the success of any organization. Project Success is directly proportional to the effective planning & execution methodology. The Advanced Management Planning Tools are applied to generate and evaluate ideas using different logical methods.
These tools are widely used in various decision-making situations across all industries and are popularly addressed as 7 MP Tools. These tools support in structured brainstorming process to simplify problems. They eliminate the fear of failure from the decision-makers mind. It helps in creating a comfort fit by deepening the ideas.
QUALTY FUNCTION DEPLOYMENT (QFD) PPT
Nowadays, one can witness the rapid changes in technology in industries. In present competitive scenario, customer satisfaction based products and services are key factors for any organization’s growth. To fulfill the customer & organization’s requirements, Quality Function Deployment (QFD) can be used.
It is the systematic approach to plan the solutions of any problem or requirements with the help of competitive analysis and mathematical priorities. It is very useful to make strategic plans to develop new or upgraded version of product as well as services.
POKE YOKE PRESENTATION PPT
As always While doing repetitive work, operators get bored and sometime ignored tasks.
If these ignored task contain maintenance task, it can lead to failure of machines.
They errors may occur due to various reasons like misunderstanding, language barriers, lack of experience, etc.
The idea is to take over repetitive tasks that rely on memory or vigilance and guard against any lapses in focus.
It is a quality assurance technique, where main objective is to reduce defects by correcting or preventing mistakes as soon as possible.
poka-yoke is a system designed to prevent inadvertent errors made by operators performing a process.
Poka-yoke can be seen as one of the three common components of Zero Defect Quality Control performed by Japanese companies
PERT - CPM PRESENTATION
PERT refers to project evaluation review technique while CPM refers to critical path method both these techniques are used in project management . PERT focuses on time estimated i.e. mean , estimated and probablistic tine while the CPM focuses on the longest path.
PPT ON KANBAN PRESENTATION
Production has a lot of process involved in it, from warehouses to final products.
If somehow these process get mixed up, production will hamper.
So, how to classify these process from each other, visual companions can be used .
It is a tool of lean manufacturing and JIT that carries information for production control.
Information is carried In form of small paper card or software data.
Kanban are used as work orders providing operational instructions with line or cell.
This is control system for the to standardize the flow of parts.
JUST IN TIME PRESENTATION (JIT)
With emergence of automation and technology upgradation the production output of the organizations has substantially increased.
High production numbers bring in greater responsibility to manage inventory.
When quantity increases, companies will need more resources to manage it effectively.
Here comes concept of JIT
Just in Time is a concept of utilizing optimum resources while keeping stocks holding as low as possible by receiving inventory on very short cycle time.
It follows principle of production in demand.
Keep resources only to keep production running for few hours only.
PPT ON CLEANING JISHU HOZEN
Cleaning is the process of removing unwanted substances such as dirt, infectious agents, and other impurities from an equipment, object or environment.
The cleaning requires thorough observation and inspection of all the equipment parts, hence it plays a very critical role in all autonomous activities.
Cleaning is the initial step of Jishu Hozen and it can be understood as follows:
Cleaning is inspection.
Inspection is finding problems.
Problems demand restoration to original proper conditions
Improvement to prevent recurrence.
PPT ON BALANCE SCORECARD (BSC)
Globalization is making business operation more complex with greater pressure on time and costs.
Making Business profitable today and tomorrow is a big challenge.
Consistent data management with holistic approach right from whole process from initial planning to last level execution in business operation is most important aspect to survive successfully.
Balance Scorecard is a strategic performance management framework that has been designed to help an organization monitor its performance and manage the execution of its strategy.
Balance Scorecard examines “how to monitor work progress towards goal attainment” so all can react to deviation from the plan.
TRAINING AND DEVELOPMENT PPT
In order to maintain a competitive edge in the marketplace, an organization invests in the training and development of the employees.
In the past (the 1970s & 1980s), training was associated with a classroom, trainer or instructor. After training everyone in the room got the same things. The world has changed and training & development process also.
Training and Development is the framework for the development of employees to upgrade their personal and organizational skills, knowledge and ability.
Training & Development is a process to improve current or future performance of employee’s by increasing their ability to perform through learning, by changing the attitude or increasing their skills and knowledge.
QUALITY MAINTENANCE PPT
There is an important correlation between quality and maintenance. Maintenance management has become the essential part of quality system. It is an investment rather than the cost. Improving the quality of maintenance will lead to improved efficiency and effectiveness. Maintaining perfect equipment means maintaining the perfect quality of products.
It is the sixth pillar of TPM and aims to assure zero defect conditions. It is done by understanding and controlling the process intersections between manpower, material, machines and methods.
It is executed by inspecting and monitoring conditions to eliminate variation. The key is to prevent defects from being produced in the first place, rather than installing rigorous inspection systems to detect the defect after it has been produced.
It is aimed towards higher customer satisfaction or customer delight through highest quality achieved from defect free manufacturing.
OFFICE TPM PPT
Office TPM is the seventh pillar and concentrates on all areas that provide administrative and support functions in the organization. The pillar applies the key TPM principles in eliminating waste and losses from these departments.
Office TPM helps in improving productivity and efficiency in the administrative functions of plant and eliminate losses. This includes analyzing processes and procedures towards increased office automation.
It’s aim is to understand the relationship between office and production activities and to achieve customer delight and zero functional losses through creation of efficient office function.
PPT ON VALUE STREAMING MAPPING (VSM)
The origin of value stream mapping can be traced back to a technique of visual mapping, the Toyota Motor Corporation used to understand the material and information flow within the organization.
Value Stream Mapping is a Lean technique used to analyze the current material and information flow necessary to bring out the products or provide services for the customer.
It (VSM) is a method for illustrating and analyzing the logic of a production process.
Value stream mapping & analysis is a tool that allows to see waste, and plan to eliminate it.
PPT ON VISUAL FACTORY
A new operator might not be able to follow too many precaution or instructions easily on the shop floor. According to a survey, human mind can absorb 80% of data just by seeing it.
Visual communication reduces whole lot of complexity in understanding. Highly visual instructions with photographs and graphics will generally minimize production errors. A visually appealing display improves the communication level.
Visual factory is a set of tools that allow for accurate and efficient information conveyance. Visual factory is the appropriate display of charts, signs and other visual tools. They together help in reducing overall complexity of instructions.
These visual are an effective way of communication to larger target audience in the shop floor. It can be easily understood by any individual in the plant without reading manuals.
It is a part of lean manufacturing, TQM, TPM by Toyota production system initiatives.
It was Introduced by Gwendolyn Galsworth in her 1997 book Visual Systems
PPT ON TOTAL PRODUCTIVE MAINTENANCE (TPM)
TPM is a Japanese concept evolved in 1951. TPM is a robust method of effective machine repairing, maintenance and an organized systematic initiative to increase machine life.
TPM has been recognized widely and accepted by many organizations as a management philosophy for effective asset management.
To improve equipment effectiveness.
To improve efficiency, effectiveness and reliability of maintenance of machines.
To train the staff in relevant maintenance skills.
To achieve early equipment management.
More from Inter Alliance Werardt (20)
Recently uploaded
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Assuring Contact Center Experiences for Your Customers With ThousandEyes
Presented by Suzanne Phillips and Alex Marcotte
UiPath Test Automation using UiPath Test Suite series, part 4
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
JMeter webinar - integration with InfluxDB and Grafana
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Designing Great Products: The Power of Design and Leadership by Chief Designer, Beats by Dr Dre
PHP Frameworks: I want to break free (IPC Berlin 2024)
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
Reflecting on new architectures for knowledge based systems in light of generative ai
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scalable Platform by VP of Product, The New York Times
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI)
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovation With Your Product by VP of Product Design, Warner Music Group
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP of Product, Amplitude
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
FIDO Alliance Osaka Seminar
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Search and Society: Reimagining Information Access for Radical Futures
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Accelerate your Kubernetes clusters with Varnish Caching
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Recently uploaded (20)
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
Assuring Contact Center Experiences for Your Customers With ThousandEyes
Assuring Contact Center Experiences for Your Customers With ThousandEyes
UiPath Test Automation using UiPath Test Suite series, part 4
UiPath Test Automation using UiPath Test Suite series, part 4
FIDO Alliance Osaka Seminar: FIDO Security Aspects.pdf
FIDO Alliance Osaka Seminar: FIDO Security Aspects.pdf
JMeter webinar - integration with InfluxDB and Grafana
JMeter webinar - integration with InfluxDB and Grafana
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Designing Great Products: The Power of Design and Leadership by Chief Designe...
PHP Frameworks: I want to break free (IPC Berlin 2024)
PHP Frameworks: I want to break free (IPC Berlin 2024)
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
Search and Society: Reimagining Information Access for Radical Futures
Search and Society: Reimagining Information Access for Radical Futures
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Epistemic Interaction - tuning interfaces to provide information for AI support
Epistemic Interaction - tuning interfaces to provide information for AI support
Accelerate your Kubernetes clusters with Varnish Caching
Accelerate your Kubernetes clusters with Varnish Caching