Power Meters Brochure

Introduction
sales@powermeters.ie Tel: 057 866 2162
- THE EXPERTS IN POWER QUALITY & ENERGY MONITORING
WELCOME
Powerpoint Engineering Limited is delighted to introduce to you our Power Meters brochure, offering you a ‘one stop shop’ for
all Power Quality & Energy Monitoring needs and solutions. We can design, supply, install, commission and support metering
systems for both Continuous Energy Monitoring and Continuous Power Quality Monitoring. You can view all these details
and more on our dedicated website www.powermeters.ie.
Our Expertise
Supplying the market since 1996, we pride ourselves on being
the industry experts in the provision of Power Quality and
Energy Monitoring solutions in Ireland. Our experienced
engineering team can deliver expert surveys and provide full
turnkey solutions to meet your specific needs.
Our Surveys
We provide a quick response in getting to your site and
liaising with you throughout the entire process from problem
identification to solution. We perform the full range of
surveys including Power Quality Studies, Power Factor/Load
Profile Surveys and Harmonic Studies. Energy Efficiency
Measurements can be performed on installed equipment
and we provide solutions for Demand Control, Power Factor
Correction and Harmonic Filtering.
Our Products
We are the authorised distributor in Ireland for leading
manufacturers in the industry such as Unipower, Gossen-
Metrawatt, Socomec, Fluke and Crompton Instruments.
We provide a wide range of products including Panel
Mounted Energy Meters, Portable Power Meters, Measuring
Transducers, Current Transformers, Metering Software and
Accessories.
Contact Us
You can contact us at anytime. Our customer and technical
support staff offer expert advice on all aspects of your Power
Quality & Energy Monitoring requirements.
Telephone: 057 866 2162
Email: sales@powermeters.ie
Fax: 057 866 2164
Company Address
Powerpoint Engineering Limited
Unit B6, National Enterprise Park
Portlaoise,
Co Laois
Bespoke Metering Systems
We design and supply bespoke power quality and energy
metering systems to meet your unique set of requirements.
We offer a full turnkey power quality and energy monitoring
solution – this can include design, electrical install,
communications bus installation and configuration, software/
pc install, configuration and support.
Our Clients
The company ethos is very much focused on you, the customer
and providing you with the best possible products, service,
advice and support. Our clients for Power Quality & Energy
Monitoring include large utility companies, generating
stations, manufacturing plants, facility managers, professional
consultants and Government Bodies.
‘Powerpoint Engineering Ltd installed 400 electrical power
monitoring meters at all of RTÉNL’s main transmission sites
around the country. RTÉNL have found Powerpoint Engineering
Ltd to be professional and competent in all aspects of the supply,
install and commissioning of the complete system.”
Mick Kehoe, RTÉNL
‘PM Group has utilized the services of Powerpoint Engineering
for a period of over 10 years. They have at all times provided
an excellent service, and we would have no hesitation in
recommending them for future projects.”
- Tadgh O’Sulivan, Senior Electrical Engineer, PM Group
Quality
The company is committed to quality. We have been assessed
by the NSAI, and we are deemed to comply with
Quality Management Standard ISO 9001:2008.
We are registered as a Level 3 Supplier with Achilles. Our
products offered are designed and manufactured to the highest
quality standards and you can be assured that all quality
procedures strictly adhere to internationally recognised
standards.

1sales@powermeters.ie Tel: 057 866 2162
Power Quality Monitoring Surveys 2
Energy Monitoring Surveys 4
Metering System Design Installation 6
Panel Mounted Meters 8
Socomec Diris Energy Meters 8
Gossen Metrawatt Energy Meters 12
Unipower Power Quality Analyzers 13
Crompton Instruments 14
Portable Power Meters 18
Fluke Energy Meters 18
Fluke Power Quality Meters 21
Unipower Power Quality Meters 26
Gossen Metrawatt Power Quality Meters 28
Megger Power Quality Meters 30
Extech Power Quality Meters 31
Electrocorder energy Meters 35
Measuring Transducers 38
Sineax Voltage Transducers 38
Programmable Transducers 38
Sineax Frequency Transducers 40
Sineax Current Transducers 41
Sineax Power Transducers 41
Current Transformers 44
Split Core Current Transformer 44
Bar Or Cable-Through Current Transformer 44
Metering Software 46
Socomec Energy Metering Software 46
Unipower PQ Secure Software 46
Diehl Hydrometer Energy Metering Systems 47
Accessories48
More About Us 49
Contents
CONTENTS

Our Power Quality Surveys cover the suite
of all Power Quality parameters, including:
• Voltage
• Current
• Harmonics THD
• Individual order harmonics power harmonics
• Voltage Unbalance
• Power Frequency
• Flicker
Voltage Transient Disturbances and Voltage Sags/Swell are
also recorded based on triggered and captured events. Detailed
findings, their interpretation and practical solutions are
included in all our reports.
We use high end power quality analyzers such as the
Unipower Unilyzer 902 to conduct our surveys. These
power quality analyzers are high performance instruments
used for simultaneous disturbance and norm compliance
measurements. We identify true three-phase measurements,
including voltage quality parameters such as unbalance (IEC
61000-4-30), harmonics (IEC 61000-47) and flicker (IEC
61000-4-15).
We provide a quick response, getting to you on-site to advise
you on the survey necessary to identify and resolve your issues.
Our expert engineering teams deliver Power Quality Studies,
Power Factor/Load Profile Surveys and Harmonic Studies.
The standard types of surveys requested are Power Quality
Harmonics Surveys (including EN50160 Analysis,
EN 50160:2010, the new version of EN50160 – Voltage
characteristics of electricity supplied by public networks) and
Load Profile/Energy Surveys.
PowerQualityMonitoringSurveys
POWER QUALITY MONITORING SURVEYS
Powerpoint Engineering Ltd has the in-house expertise, experience and necessary equipment to provide to you the complete
range of Power Quality Surveys to meet your specific needs.
Contact us by phone 057 8662162 or email sales@powermeters.ie to book your Power Quality Monitoring Survey today.
CASE STUDY – CEMENT FACTORY
A Sunday evening, 8.30pm, a cement factory in Ireland
suddenly came to a complete stop. Garrett Kelly from
Powerpoint Engineering Ltd was called in to investigate.
Eight years earlier the factory had installed PQ Secure
system and a UP 2210 for post-processing of data. The
meter was still logging as it should and after downloading
data, investigation showed an arcing earth fault causing the
interruption. Yet more important was that the data showed
that the shutdown could have been avoided.
PQ Secure is designed to be an early-warning system so
after a system upgrade PQ Secure is now in use documenting as before and at the same time alerting for abnormal values
and disturbances. More UP 2210s have also been added to strategic connections.

CASE STUDY - VOLTAGE SAG – PHARMACEUTICAL COMPANY
This is a synopsis of Power Quality case study regarding the phenomenon of Voltage Sag experienced at a pharma plant.
SITUATION/PROBLEM
A pharmaceutical company based in Dublin had two power
quality analyzers (Unipower UP2210) installed on the LV side
of their two 10kV Main Incoming Supplies. The site had been
experiencing some critical sags at their incoming supply. The
supply authority had advised that they had experienced no issues
on their supply that matched up with the occurring power quality
events on site.
The Unipower PQ Secure Software for the installed analyzers
yielded conflicting reports. Supply #1 indicated that the incoming
supplywastheoriginoftheVoltageSag,whilstSupply#2indicated
that the Voltage Sag was actually being caused by the connected
load at the plant.
SOLUTION
After consultation and review with Powerpoint Engineering Ltd, it was advised that the conflicting PQ Secure reports were
accurate. There was a large connected load which was generating large inrush currents causing the voltage supply to sag. The
supply to this load was being disturbed and the connected power quality analyzer recognised the direction of the Voltage Sag
event – i.e. from the load.
The Voltage Sag was so severe that it was causing the high voltage supply to be affected, and therefore affecting the other supply
also. The plant also utilised a portable Power Quality Analyzer (Unipower Unilyzer 901). This portable power quality analyser
was used by the pharmaceutical company to identify the source of this recurring Sag event.
Remedial action was taken on the connected equipment, and good power quality was restored to the plant.
Contact us by phone on 057 8662162 or email sales@powermeters.ie to find out more about our Power Quality Surveys.
PowerQualityMonitoringSurveys
POWER QUALITY MONITORING SURVEYS
TESTIMONIALS
“Powerpoint Engineering Ltd have provided excellent
service at three of our windfarms over the past ten years.
Theyhavesupplied,installed,commissionedandsupported
Power Quality monitoring systems during this period. We
are very happy with the supplied products and support and
we look forward to continuing our special relationship over
the coming years.”
Denis Tangney, Saorgus Energy
“We have used Powerpoint Engineering Ltd in Portlaoise
Maintenance Depot on a number of occasions for Power/
Energy Monitoring and other activities.
On all occasions, we have found Powerpoint Engineering
Ltd staff to be very professional and competent. We
would be happy to use their services again.”
Shane McManus, Safety Facilities, Irish Rail

Load Profile Surveys
Our Surveys are typically used for evaluating transformer
loads and connected load power factor.
All Load Profile Studies include measurements for a typical
load cycle:
• The site load [kW]
• Apparent power/MIC [kVA]
• Power factor
• Maximum/minimum and average values of Voltage
• Load Current Current Spikes
LoadProfileSurveys canbeusedtoevaluateavailablecapacity
of existing transformers, available current carrying capacity
of existing cables or suitability/performance of power factor
correction equipment.
Our detailed findings, their interpretation and
recommendations are included in all our survey reports. A
typical survey is carried out over a one-week period. Reports
are prepared, after removal of power monitoring systems and
equipment, in a prompt manner.
EnergyMonitoringSurveys
ENERGY MONITORING SURVEYS
Contact us by phone 057 8662162 or email sales@powermeters.ie to book your Energy Monitoring Survey today.
Powerpoint Engineering Ltd can perform Energy Monitoring Surveys to suit your specific needs. We provide solutions for
Demand Control, Power Factor Correction and Harmonic Filtering.
TESTIMONIAL
“PM Group, an international AE firm with over 1800 staff in 25 locations worldwide, have utilized
the services of Powerpoint Engineering for a period of over 10 years. Powerpoint have at all times
provided an excellent service, and we would have no hesitation in recommending them for future
projects.”
Tadgh O’Sulivan, Senior Electrical Engineer, PM Group
We have carried out electrical load studies at various industries for a range of clients including:

EnergyMonitoringSurveys
ENERGY MONITORING SURVEYS
CASE STUDY - ENERGY METERING – LARGE DATA CENTRE
This is a synopsis of an energy monitoring case study relating to the design and supply of an award winning electrical
energy metering system for a large data centre in Dublin. MITIE Facilities Management Powerpoint Engineering Ltd
collaborated in the design, installation and commissioning of the Electrical Energy Metering System.
SITUATION/PROBLEM
A large data centre based in Dublin sought to implement ISO
50001 - Energy Management at its facility. The objective of this
new EU standard for energy awareness is to help organisations
use energy more efficiently and save money as a consequence.
A further benefit of this is it will help to conserve resources and
tackle climate change. ISO 50001 encourages organisations in all
sectors to use energy more efficiently through the development
of an energy management system.
The standard provides a framework of requirements for
organisations to:
• Deploy a policy for more efficient energy use
• Fix targets and objectives to meet the policy
• Use data to better understand and make decisions about energy use and measure the results
• Review how well the policy works and continually improve energy management.
The Data Centre Manager, as part of the requirements in implementing ISO 50001, has to account for where the energy it is
using is going to ensure that it is being used efficiently. The Data Centre consists of approximately 20 data halls with a significant
number of servers in each data hall. The energy costs associated with the Data Centre are in the region of €3,000,000 per annum.
SOLUTION
The Data Centre put in a place a team of professionals with the relevant expertise to help implement this new standard. This team
consisted of Powerpoint Engineering Ltd, experts in the design, supply and installation of bespoke energy metering systems
based on client requirements and MITIE Facilities Management, the resident Facility and Energy Managers with the relevant
Facilities Management expertise and on-site knowledge.
There was significant collaboration between all parties through the duration of this award wining project to ensure the delivery
of a solution which sufficiently met the needs and objectives of the client.
Contact us by phone on 057 8662162 or email sales@powermeters.ie to find out more about our Energy Monitoring Surveys.
TESTIMONIAL
“Powerpoint Engineering Ltd installed 155 electrical power monitoring meters at a
large Data Centre in Dublin on behalf of Mitie Facilities Management. The meters and
associated monitoring system record and report electrical usage across all of the Data rooms.
All data is gathered remotely and displayed on effective easy to use software interface.
We have found Powerpoint Engineering very professional in all aspects of the supply, install,
commissioning and ongoing expansion and continued support of the system.”

Gordon Keogh, MITIE

Metering System Design Installation
We supply bespoke energy metering systems to your
requirements. Every client has a unique set of requirements.
Some may only require us to supply electrical energy metering
equipment, others might need meters that specifically monitor
gas, water and electrical consumption. We can supply energy
metering equipment for new builds and installations or we
can supply retrofit solutions.
We offer a full turnkey energy metering solution – design,
electrical install, communications bus installation and
configuration, software/pc install, configuration and support.
Our experienced engineering team can offer site surveys
to discuss your exact requirements and possible metering
solutions.
Panel Mounted Meters Or Din Rail Meters
Installation
All our metering systems are flexible and modular, and can be
integrated into existing metering systems and BMS systems.
Alternatively, we can install and configure communications
and metering software. Panel mounted or din rail mounted
meters are available, displaying basic parameters such as:
• Energy only (with optional outputs – pulse, modbus or
analogue)
• Multi-functional displays
Remote access support solutions are provided via Teamviewer,
VPN, Logmein or other means.
MeteringSystemDesignInstallation
METERING SYSTEM DESIGN INSTALLATION
Powerpoint Engineering Ltd has the necessary in-house expertise and experience to design and install bespoke Power Quality
and Energy Metering Systems.
Performing load profile studies can provide a detailed footprint of the site load at a given time – however, the installation of an
Energy Management System provides continuous measurements in the electrical network and detailed reporting on the site
load. Electrical Network Monitoring Systems can also be installed for continuous monitoring of the site supply power quality.
This is typically the first step towards achieving EN ISO 50001 Energy Management Systems Certification.
Contact us by phone on 057 8662162 or email sales@powermeters.ie to arrange your Metering System Design Installation.
TESTIMONIAL
“Powerpoint Engineering Ltd installed 400 electrical power monitoring meters at all of RTÉNL’s main transmission sites around
the country. The meters and associated monitoring system record and report electrical usage across all of the individual television,
radio and telecommunications services at each of the locations. All data is gathered remotely and displayed on effective easy to
use software interface. RTÉNL have found Powerpoint Engineering Ltd to be professional and competent in all aspects of the
supply, install and commissioning of the complete system.”
Mick Kehoe, RTÉNL
Our clients include universities, pharmaceutical bio medical companies, the catering hospitality sector and
utilities sector.

CASE STUDY - ELECTRICITY, GAS METER WATER METER INSTALLATION
This is a synopsis of power quality case study regarding the installation of electrical energy meters, gas meters and water
meters at a third level education institution. An ongoing contract with the tertiary education institution has seen the
installation of a large number of electrical energy meters, gas meters and water meters which are all connected over the
site LAN back to a central PC.
SITUATION/PROBLEM
The college had a requirement to assess the carbon footprint, energy usage and
associated costs with the various buildings and supplied services throughout
the entire campus.
It was first decided to measure electricity, gas and water usage at the main
supply points. Data logging and easy to use regular reporting software was
required. Due to the size of the campus, there was a requirement to transmit
the measure data via the college local area network.
OUTCOME
PowerpointEngineeringLtd installed an energy metering system using SocomecDirisandCountismeterswithVisionControl
Software. This included electrical energy meters at the two main switchrooms, at each circuit on the main switchboards. Some
existing water and gas meters were utilised where pulse outputs were available. Where gas and water meters did not exist, new
meters were fitted and interfaced with the energy metering system.
As energy readings were gathered, large load consumers could be identified. The buildings and estate office implemented
adjustments to the building management system to make energy savings where possible. In other cases new technologies were
installed, such as high efficiency lighting. The result of these works could be monitored using the energy metering system
installed, justifying the investment and validating the payback periods.This lead to further extension of the metering system
and further installations of new energy saving and energy efficiency plant. The metering system is currently monitoring in
excess of 200 measurment points.
The most recent development has been the identification of the base load to an area of the campus, the gas consumption and
water usage was also monitored. From collation of measured data from the metering system a Combined Heat Power (CHP)
system was sized and installed. The performance of this CHP plant is now being monitored by the same system.
Contact us by phone on 057 8662162 or email sales@powermeters.ie to find out more about our Energy Metering System
Installation Design. MeteringSystemDesignInstallation
METERING SYSTEM DESIGN INSTALLATION
TESTIMONIAL
“Cork Institute of Technology tendered for a Sub-Metering System in 2008. Powerpoint
Engineering were successful and have managed the growth of the system from the original 30
No. electrical meters to currently 84 meters. The sub-metering system monitors both electrical
and natural gas usage across the campus. All data is gathered and displayed on effective easy
to use software. We have found Powerpoint Engineering Ltd to be an excellent company in all
aspects of the supply, installation and expansion of the system.”

Michael Coughlan, Cork Institute of Technology

PanelMountedMeters
PANEL MOUNTED METERS
We supply the full range of Panel Mounted Meters in Ireland including Socomec Diris Energy Meters, Gossen Metrawatt Energy
Meters Unipower Power Quality Analyzers. View all these and more on our dedicated website www.powermeters.ie
SOCOMEC DIRIS ENERGY METERS
Socomec Diris A Range
Product Code: 4825 0010, 4825 0A20, 4825 0A40
The DIRIS A Power Measurement Devices with extended functionality enables you to reduce operating costs, reduce production
costs, optimise maintenance costs and improve the efficiency of your facility. The Diris A Range also conforms to IEC 61557-12
standard.
Diris A Range Features:
• Metering - energy consumed by each building or manufacturing line, in order to distribute and optimise energy costs
• Measuring - all electrical or analogue values (temperature, etc.) to verify that your facilities are working properly
• Monitoring - your electrical networks via alarm management, secure monitoring of distribution parameters and remote
control of electrical apparatus
• Analysing - energy quality via detailed breakdown of harmonics and identification of troughs, outages, overvoltages and
overcurrents on the electrical network
• Communicating - all available information via a network tailored to your facility:
ETHERNET (Modbus TCP, Jbus/Modbus RTU over TCP)
RS485 (Jbus/Modbus, Profibus DP)
Diris A10 - 4825 0010 Diris A20 - 4825 0A20 Diris A40 - 4825 0A40
• Multi-measurement and metering
• THD voltages and currents up to
level 51
• Programmable hour meter
• Alarm management
• RS485Jbus/Modbuscommunication
• Dual tariff function
• 4 DIN modules
• Multi-measurement and metering
• THD voltages and currents up to
level 51
• Programmable hour meter
• RS485Jbus/Modbuscommunication
• Optional additional modules
• 96 x 96 mm panel mount
• Advanced metering and multi-
measurement
• Individual harmonics up to level 63
• RS485 and Ethernet communication
• Optional additional modules
• Predictive power indicator
• 96 x 96 mm panel mount

PanelMountedMeters
Socomec Diris Pulse Output Modules
Product Code: 4825 0080, 4825 0090
Using the Diris A20 or Diris A40 energy meter’s front panel display settings such as pulse constant, pulse length and pulse type
can all be set up. The Socomec Diris A Pulse Output Module provides 1 pulsed output contact for connection to a metering
system or BMS.
Diris A20 Pulse Output Module - 4825 0080 Diris A40 Pulse Output Module - 4825 0090
The Socomec Diris A20 Pulse Output Module is a plug-in
pulse output module for the Diris A20 meter.
The Socomec Diris A40 Pulse Output Module is a plug-in
pulse output module for the Diris A40 meter.
Socomec Diris A Pulse Output Module Features:
• Pulses: configurable (type, weight, time) in kWh or kvarh
• Monitoring: 3I, In, 3V, 3U, F, ΣP, ΣQ, ΣS, ΣPFL / C, THD 3I, THD 3V, THD 3U and timer
• Comunication: RS485 connection with JBUS/MODBUS protocol (speed up to 38,400 bauds): 1 module
MORE ABOUT DIRIS ENERGY METERS
The DIRIS energy meter analyses energy quality via
detailedbreakdownofharmonicsandidentification
of troughs, outages, overvoltages and overcurrents
on the electrical network.
The Socomec Diris Energy Meters Ethernet
communication modules has an embedded web
server function, which enables remote operation/
configuration via your Internet browser, by simply
entering the IP address of the DIRIS.

PanelMountedMeters
Socomec COUNTIS E10/E11/E12 Energy Meter
Product Code: 4850 3002
SocomecCOUNTISE10/E11/E12EnergyMeters are active electrical
energy meters designed for single phase load metering.
The Socomec COUNTIS E10/E11/E12 Energy Meters are used for
direct connections up to 63 A and can be utilised for the direct
measurement of energy, single phase or three-phase, for currents
below 100 A, and three-phase indirect measurement via CTs for
currents up to 6000 A.
Socomec COUNTIS E10/E11/E12 Energy Meters feature a bright LCD
display with navigation and reset key, plus metrological LED. Socomec
COUNTIS Ex series conforms to standards IEC 62053-21 class 1, IEC
62053-31, IEC 62053-1, EN 50470-1 and EN 50470-3.
COUNTIS E10/E11/E12 Energy Meter Features:
• The Socomec COUNTIS E10 energy meter displays the total
energy consumed and allows remote access through pulse output.
Metering over specific period can be managed through a partial
counter.
• The Socomec COUNTIS E11 energy meter is a double tariff
meter meant for dual tariff invoicing. The Socomec COUNTIS E12
energy meter features MID certification. MID certified meters feature
extra thefts protection (meter can not be reset, sealed casing) and
extra accuracy (temperature, humidity, and other external factors
are extended).
Socomec COUNTIS E20/E21 Energy Meter
Socomec COUNTIS E20/E21 Energy Meters are active
electrical energy meters designed for three-phase networks.
COUNTIS E20/E21 Energy Meters are used for direct
connections up to 63 A and conform to standards IEC 62053-
21 class 1.
Socomec COUNTIS E20/E21 Energy Meters
Features:
• The Socomec COUNTIS E20 energy meter displays
the total energy consumed and allows remote access
through pulse output. Metering over specific period can
be managed though a partial counter.
• The Socomec COUNTIS E21 energy meter is a double
tariff meter meant for dual tariff invoicing. For each
tariff a partial counter is available.

PanelMountedMeters
Socomec COUNTIS E30 Energy Meter
The Socomec COUNTIS E30 Energy Meter is an active electrical energy meter designed for three-phase networks. It is used
for direct connections up to 100 A.
The COUNTIS E30 displays the total energy consumed and allows
remote access through pulse output. Metering over specific periods
can be managed though a partial counter. The Socomec COUNTIS
E30 conforms to standards IEC 62053-21 class 1, IEC 62053-23
class 2, EN 50470-1 and EN 50470-3.
Socomec COUNTIS E30 Energy Meter Features:
• For three phases LV networks
• Direct connection up to 100 A
• +kWh and + kvarh metering
• Active power measurement
• 1 impulse output or JBUS/MODBUS RS485 serial port
• MID version and Dual tariff version
MORE ABOUT SOCOMEC COUNTIS ENERGY METERS
COUNTIS E devices can manage up to 4 tariffs, with four separate time slots available for detailed monitoring of energy
consumption. (RS485 connection required). To use COUNTIS E devices remotely a pulse output or communication via RS485
Jbus/Modbus is available.
Benefits of the COUNTIS E range:
• MID tamper-proof metering which guarantees you accuracy and reliability when metering.
• Communication on all models. COUNTIS E are provided with either a pulse output or an RS485 communication output
with Modbus or M-BUS protocol.
• The HVAC energy consumption regulation is designed to limit energy consumption in new buildings, whether in the
residential or service sector.
• All COUNTIS E are protected against phase/neutral inversion and detect wiring errors. Installation is faster and the meter
• is guaranteed to operate correctly.
• Direct measurement of energy, singlephase and three-phase, for currents below 100 A. For currents over 100 A and up to
• 6000 A: indirect measurement is done via current transformers.
• Rapid configuration. The Easy Config software can be used to quickly and easily create, edit and save configurations for
COUNTIS E products.

PanelMountedMeters
GOSSEN METRAWATT ENERGY METERS
We supply the full range of Gossen Metrawatt energy meter (panel mount energy meters) with MID approval. We are the approved
distributor for Gossen Metrawatt in Ireland.
Gossen Metrawatt U1389 Energy Meter (MID Approved)
Product Code: U1389
The Gossen Metrawatt U1389 Energy Meter is an active
Energy Meter with MID Approval. This calibrated energy
meter is used to acquire and bill active energy in industrial,
household,commercialandbuildingmanagementapplications.
The Gossen Metrawatt U1389 Energy Meter is easy to install
as the meter immediately indicates connection errors.
Relevant values are transmitted to data logging, billing
and optimizing systems by means of a pulse output, or via
LON, M-Bus or L-Bus interface. Depending on the type of
multifunctional variant, the meter is also capable of acquiring
reactive power and displaying up to 26 additional measured
quantities.
Gossen Metrawatt U1389 Energy Meter Features:
• Professional energy meters for 2, 3 and 4 wire systems with 65 A direct connection, or 1 A or 5 A transformer connection
• Accuracy class B for industrial and commercial use, as well as for household use with highly demanding requirements
• Cost savings thanks to initial calibration at the factory in accordance with MID, conformity assessment procedure modules
B and D
• Calibration even with adjustable transformation ratios
• Configurable, multifunctional variants for acquiring reactive energy and mains quantities
• Installation errors display: phase sequence, phase failure, transformers with reversed polarity, overload
• Universal pulse output with adjustable pulse rate and pulse duration, as well as selectable voltage range
• Flexible communication via integrated LON, M-Bus or L-Bus interface
• Full functionality even when the electrical circuit is switched off thanks to failsafe 24 V auxiliary voltage
• Tamper-proof cover, configuration disabling
Gossen Metrawatt U1389 Energy Meter Accessories:
U270A UBAT-24V ASK 31 .. 412 WSK 30 .. 70 SC30 .. 50
Installation Set for
Door Mounting of
Energy Meters
Battery Pack for
Reading Voltage-Free
Meters
Bushing-Type Current
Transformer for
Indirect Measurement
of Sinusoidal AC
Wound-Primary
Current Transformers
for Indirect
Measurement of
Sinusoidal AC
Split-Core Current
Transformers

PanelMountedMeters
UNIPOWER POWER QUALITY ANALYZERS
We supply the full range of Unipower Power Quality Analyzers and panelmounted power meters. We are the approved Unipower
distributor in Ireland.
Unipower UP-2210 Power Quality Measure Unit
Product Code: 22-003X*
The Unipower UP-2210 Power Quality Measure Unit functions as an advanced
power quality meter and at the same time as a fault recorder.
The UP-2210 Power Quality Measure Unit are the nodes of which the PQ
Secure system consists. For fully reliable data and reference measurements, each
Unipower UP-2210 unit is certified in accordance with the measure standard
IEC 61000-4-30, Class A.
The UP-2210 captures both steady state disturbances (harmonics, flicker etc) as
well as rapid voltage changes (sag/swell events and fast transients). All power
quality parameters can be analysed in accordance with voltage quality standards
such as the EN 50 160.
Unipower PQ Secure system will automatically transfer data from the Unipower
UP-2210 units to the central database, analyse the measure result and show an
event list or graphical data. The software also has an automatic report generator
that can create reports in accordance with international voltage standards such
as EN 50160.
Unipower UP-2210 Power Quality Measure Unit Complies with:
Unipower UP-2210 Power Quality Measure Unit main features:
• All data are processed in real time by a 32 bit Digital
Signal Processor.
• High speed sampling frequency of 12.8 kHz gives a better
accuracy of all measured parameters.
• High accuracy in all measured parameters thanks to
a synchronisation between the sampling of the input
signals and the power frequency. The synchronisation
is made possible by a built-in PLL (phase-locked loop).
• Easily upgradeable with newer software versions thanks
to the built in Flash memory.
• The evaluation software programs PowerProfile and
Unipower Report are developed specially to make the
analysis process easy and straight-forward. Unipower
Report makes an automatic report according to national
and international standards. Any new standards can
easily be adopted to Unipower Report as a plug-in
module.
EMC:
EN 50081-1,2
EN 50082-1,2
Voltagecharacteristics:
EN 50160,
EN 61000-2-2,
EN 61000-2-12
Harmonics:
IEC 61000-4-7
Flicker:
IEC 61000-4-15
Power quality measurement
methods:
IEC 61000-4-30, Class A

PanelMountedMeters
Integra Ri3 Digital metering system
Product Code: Integra Ri3
The Integra Ri3 digital metering system (dms) is an accurate
and cost effective solution for measurement and display of all
major electrical and power quality parameters. It is an ideal
choiceforcustomerswhorequirereliableenergymeasurement.
Integra Ri3 dms measures 17 electrical parameters
Integra Ri3 Digital Metering System Benefits Features:
• DIN-rail enclosure DIN 43880
• Backlit LCD screen
• Programmable CT ratio
• True rms measurement
• User programmable system configuration
• Pulsed output and Modbus as standard
• Cost effective
• Simple navigation
• Crompton renowned quality
Integra Ci3 Digital Metering System
Product Code: Integra Ci3
The Integra Ci3 digital metering system is an accurate
and cost effective solution for measurement and display of
all major electrical and power quality parameters with easy
programming, mounting and user friendly navigation. Integra
Ci3 dms measures 17 electrical parameters including total
harmonic distortion (THD) measurement up to the 31st
harmonic.
Integra Ci3 Benefits Features:
• Cost effective with Intuitive navigation
• Easy ‘clip-in’ panel mounting
• DIN 96 enclosure
• Backlit LCD screen, Bezel depth 6.1mm
• Plug-in output modules, Programmable CT ratio
• User programmable system configuration
CROMPTON INSTRUMENTS
We supply the full range of Crompton Instruments Panel Mounted Meters. We are the approved distributor for Crompton Instruments
in Ireland.
Integra Ci5 Digital Metering System
Product Code: Integra Ci5
The Integra Ci5 Multifunction Power Meter is an ideal choice for customers who require reliable energy measurement. It is
built to high quality standards utilising ‘state of the art’ microprocessor and manufacturing technology. The Intergra Ci5 is part
of the Q2C metering system which have plug-able terminals and can be used with the QC3N1 plug in current transformer and
the pre-manufactured wiring looms.
Integra Ci5 Digital Metering System Features:
• Voltage In and Out connection
• Pulsed and RS485 Modbus RTU fitted as standard
• Programmable CT ratio and True rms/THD measurement
• Self powered, no need for additional auxiliary supply for screen display operation
• User programmable, single-phase or three-phase four-wire system configuration
• Easy ‘clip-in’ panel mounting
• New blue on black back-lit and LCD screen

PanelMountedMeters
DRB Energy-Meters Three-Phase 80-3P
Product Code: DRB 80-3P
DRB-80-3P is a digital kWh meter to register active energy,
both imported and exported, with 2 So pulsed outputs for
remote monitoring of active and reactive energies on both
tariffs. This series of Digital energy meters measures active
energy in three phase systems in residential, utility and
industrial applications.
DRB Energy-Meter Three-Phase 80-3p Features:
• For transformer primary current of 5A to 10.000/5A.
Input is in 5A increments
• 9 digits – 4 display for energy values indication
• Detection of connection errors
• Accuracyclass1foractiveenergyaccordingtoEN50470-3(B)
• Operating range current (Ist … Imax) for direct
connection 80A = 0.015 … 80A for connection by CT
…/5A = 0.003 … 5A
• Energy register for import and export
• Sealable terminal covers
• 4 DIN modules wide (72mm)
Q2C Wiring Solution
Product Code: Q2C
The Q2C wiring solution reduces wiring time by at least 80%,
whilst also ensuring error-free installation. With the Q2C
wiring solution, you can quickly and easily connect Integra
Ci5 Digital Metering System (DMS) and 3-in-1 current
transformers.
Components include the Integra Ci5 DMS, 3-in-1 CTs and
wiring looms in various lengths.
Q2C Wiring Solution Key Benefits Features:
• A complete wiring solution with integral connectors and
earthing
• Screwless terminal connections, vibration proof and
maintenance free
• Reduces installation time by at least 80% over standard
methods
• Eliminatespotentialcostoferrorsinelectricalconnections
or programming
• Tidy solution to cable management
M-Bus Interface DRM-M
Product Code: DRM-M
The M-Bus interface (1 module wide, DIN rail mount) is intended for connecting the energy
meter to M-Bus. M-Bus is a standard widely used for remote reading of various types of
consumption meters and sensors.
The interface receives the measurement data from the energy meter by means of the infrared
port available on the side of the meter itself, and gets the power supply from the bus, so that
only the bus wiring (a two-wire standard telephone cable) must be connected, no additional
wiring is required. The interface is suitable for both single-phase and three-phase energy-meter.
M-Bus Interface Drm-M Features:
• Interface for energy, power, voltage, current, cos and frequency, etc.
• M-Bus according to EN1434
• Suitable for both single and three-phase energy-meters, network analysers and power-meters
• 1 DIN module wide (18mm)

PanelMountedMeters
KNX Interface
Product Code: DRM-KNX
The KNX interface (1 module wide, DIN rail mount) is
intended for connecting the energy meter to KNX bus.
KNX bus is widely used for home and building control
applications. The interface receives the measurement data
from the energy meter by means of the infrared port available
on the side of the energy meter itself, and gets the power
supply from the bus. Only the bus wiring (twisted pair) must
be connected, no additional wiring is required.
The interface is suitable for both single-phase and three-phase
energy-meters (DRB-80-3P).
KNX Interface Features:
• Interface for energy register and power measurements, etc.
• Communication in compliance with KNX standard for
home and building control
• Configuration via ETS3
• Energy registers transmitted as float values (EIS9)
• Suitable for both single-phase and three-phase energy-
meter
Modbus interface RTU and Ascii DRM-MOD
Product Code: DRM-MOD
The product is intended to be placed side by side to an energy
meter, equipped with an infra-red port on the side, to collect
the measurements data from the instrument and to transmit
them via an RS-485 serial line to a remote collection station
using Modbus protocol.
The communication module automatically recognizes the
instrument connected to its infra-red port and is in the
position to transmit all the data provided by the instrument
itself.
1 standard module housing (18mm wide), suitable for DIN-rail
mounting 35mm
Modbus Interface RTU and Ascii DRM-MOD Features:
• Interface available:
type BIG ENDIAN: for energy, power, voltage, current,
cos and frequency, etc.
• Modbus Ascii and Modbus, RTU protocols
• Suitable for both single-phase and three-phase energy-
meter

PanelMountedMeters
DRM Energy-Meters Single-Phase 32 -1P
Product Code: DRM 32-1P
The energy-meters use an LCD display to give a clear reading and are used to
measure single-phase systems in residential, utility and industrial applications.
Monitoring of the energy-consumption is via two SO pulse outputs.
The products can be set up to communicate with Modbus RTU, M-Bus, KNX
and SD card datalogger interfaces, and thus can be used to analyse energy-
consumption in order to reduce to a minimum the running cost for industrial
plants and buildings.
Active energy-meters for single-phase alternating current with a, 7 digits counter.
These meters have 1 S0 output generating pulses for remote processing of the
active energy measurements for 1 tariff.
DRM Energy-Meters Single-Phase 32-1P Features:
• Display LCD
• For direct connection 32A and 40A
• 7 digits for energy and other values indication
• Accuracy class 1 for active energy and power according to EN 50470-3 (B)
• Operating Current for direct connection 32A and 40A = 0.020
• Seal-able terminal covers
• Designed to be combined with the communication module
• 1 DIN modules wide (18mm)

PortablePowerMeters
PORTABLE POWER METERS
Fluke Thermal Imager A3001FC IFlex Kit
Product Code: A3001FC
Fluke Thermal Imager kits combined with the Fluke Connect
app, test tools and modules allow you to create the highest
performance in troubleshooting and maintenance:
• All your Test Measurement data combined
• Easily document your data
• Share data with your team without leaving the field
• Work more flexible, faster, safe and secure.
Fluke A3001FC iFlex Kit includes:
• Fluke 3000 FC Wireless Digital Multimeter with three (3)
AA batteries (installed)
• One (1) A3001 FC Module with two (2) AA batteries
• One (1) iFlex 10” coil and One (1) magnet/strap
• TL175 Test Leads (1 pair)
• AC175 Alligator Clips (1 pair)
• C3003 3-compartment soft case Information pack
Fluke Connect with ShareLive™ video call is the only wireless
measurement system that lets you stay in contact with your
entire team without leaving the field. The Fluke Connect
mobile app is available for Android™ (4.3 and up) and iOS
(4s and later) and works with over 20 different Fluke products.
Make the best decisions faster than ever before by viewing
all temperature, mechanical, electrical and vibration
measurements for each equipment asset in one place. Get
started saving time and increasing your productivity.
Fluke 434 Energy Meter
Product Code: FLK-434
The Fluke 434 II Energy Analyzer is the ideal tool for energy
logging. Utilizing the new Energy Loss Calculator function,
the 434 II measures the fiscal cost of energy wasted due to poor
power quality. This energy monetization capability allows you
to identify the most energy-wasteful areas of your facility so
you can determine potential energy saving solutions.
ApplicationsincludeEnergymonetization,Energyassessment,
Frontline troubleshooting, Predictive maintenance, Long-
term analysis and Load studies.
Fluke 434 Energy Meter Features:
• Energy loss calculator: Classic active and reactive power
measurements, unbalance and harmonic power, are
quantified to pinpoint the fiscal costs of energy losses.
• Troubleshoot real-time
• Highest safety rating in the industry: 600 V CAT IV/1000
V CAT III rated for use at the service entrance.
• Measure all three phases and neutral
• Every measurement is automatically recorded
• System-monitor: Ten power quality parameters on one
screen according to EN50160 power quality standard.
• Logger function: Configure for any test condition with
memoryforupto600parametersatuserdefinedintervals.
• View graphs and generate reports
• Battery life: Seven hours operating time per charge on
Li-ion battery pack.
We supply the full range of Portable Power Meters in Ireland including Fluke Energy Meters, Fluke Power Quality Meters, Unipower
Power Quality Meters, Gossen Metrawatt Power Quality Meters, Megger Power Quality Meters, and Extech Power Quality Meters.
FLUKE ENERGY METERS
We supply the full range of Fluke Energy Meters Fluke Portable Energy Metering Equipment. We are the official Fluke
distributor in Ireland.

PortablePowerMeters
Fluke 1730 Features / Benefits:
• Key measurements: voltage, current, power, power factor
and associated values enable energy saving strategies to
be implemented.
• Bright, color touch screen
• Comprehensive logging: all measured values are
automatically logged and can be reviewed during logging
and before downloading for on the-go analysis.
• Optimized user interface
• Complete in-the-field setup through the front panel: no
need to return to the workshop for download and setup.
• Wide range power: power instrument directly from the
measured circuit eliminating the need to find a power
outlet while allowing the instrument to be secured safely
inside electrical panels.
• Two USB ports: one for PC connection and another for
download to standard USB thumb drives or other USB
devices.
• Compact size.
• Highest safety rating in the industry: 600 V CAT IV/1000
V CAT III rated for use at the service entrance and
downstream.
• Optimized measurement accessories: flat voltage cable
and thin flexible current probes ensure easy installation
even in tight spaces.
• Battery life: four-hour operating time (backup time) per
charge on lithium-ion battery.
• Security: safeguard against theft with a Kensington lock.
• All new, Energy Analyze application software: download,
analyze and automated reporting for a complete picture
of energy saving potential.
Fluke 1730 Three Phase Electrical Energy Logger
Find out where you are wasting energy, from the service
entrance to individual circuits, optimize your facility’s energy
use and reduce your bill with the Fluke 1730 Three Phase
Electrical Energy Logger. The Fluke 1730 instrument is
extremely easy to use; it even does automatic checks to
guarantee that the user has connected the leads and current
sensors up correctly.
Fluke 1730 Kit Contents:
• 1730 Energy Logger
• Power Supply
• Voltage Test Lead
• Dolphin Clip, Black
• Set of three Thin-Flexi Current Probes, 30.5 cm
• i1730-flex1500/3PK
• Color-coded Wire Clips
• Power Cord (see Figure 1)
• Test lead with stackable plugs, 10 cm
• Test lead with stackable plugs, 2 m
• DC Power Cable
• USB Cable A, Mini-USB
• Soft Storage Bag/Case
• Input Connector Decal
• The power cord and input connector decal are country-
specific and vary according to the order destination.
• Documentation Info Pack
• 4 GB USB Flash Drive (includes User’s Manual)

PortablePowerMeters
The Fluke 1735 Power Logger is a power meter that is used
for conducting energy studies and basic power quality logging.
The power quality meter measures most electrical power
parameters, harmonics, and captures voltage events.
The Fluke 1735 Power Logger can be used to verify electrical
system capacity before adding loads and quantify energy
consumption before and after improvements to justify energy
saving devices.
Fluke 1735 Power Logger Features:
• Record power and associated parameters for up to 45 days
• Monitor maximum power demand over user-defined
averaging periods
• Prove the benefit of efficiency improvements with energy
consumption tests
• Measure harmonic distortion caused by electronic loads
• Improve reliability by capturing voltage dips and swells
from load switching
• Easily confirm instrument setup with color display of
waveforms and trends
• Measure all three phases and neutral with included 4
flexible current probes
• View graphs and generate reports with included Power
Log software
• Compact, rugged design with IP65 case, 600 V CAT III
and two-year warranty
Fluke 1735 Three Phase Power Logger
Fluke 1735 Power Logger Kit Contents:
• Soft carrying case
• 4 flexible current probes (15 A/150 A/3000 A)
• Power Log software
• Voltage leads and clips
• Color localization set
• PC interface cable
• International ac adapter (115/230 V, 50/60 Hz)
• Printed manual
• Multi-language manual CD
Applications include Load studies, Energy assessments,
Harmonics measurements and Voltage event capture.

PortablePowerMeters
FLUKE POWER QUALITY METERS
We supply the full range of Fluke Power Quality Meters, Quality Loggers, Power Quality Recorders, Power Quality Energy
Analyzers Clamp Meters. We are the official Fluke distributor in Ireland.
Fluke VR1710 Single Phase Voltage Quality
Recorder
Product Code: FLK-VR1710
The Fluke VR1710 Single Phase Voltage Quality Recorder
is a plug-in voltage quality recorder that detects and records
power quality problems. The VR1710 records power quality
parameters including RMS average, transients, flicker, and
harmonics up to the 32nd, using a user-selected average
period from 1 seconds to 20 minutes.
Fluke VR1710 Features:
• Fast and easy recording of voltage trends, dropouts, and
power quality
• Plug directly into the mains power socket and capture
data
• Continuous recording of all values with no gaps – both
events and voltage
• Clear graphical summary easy reporting of data and
quick overview of key power quality parameters – Take
the guesswork out of diagnosing voltage quality problems
• Displays ctual transient display (100 μs) with time stamp
• Flicker recording to EN 61000-4-15
• Includes PowerLog software package for quick download,
analysis, and automatic reporting
Fluke VR1710 Single Phase Voltage Quality Recorder Kit
Contents:
• Plug-in Fluke VR1710
• USB Cable
• PowerLog Software CD
• Universal power cord adapters
Fluke 345 Power Quality Clamp Meter
The Fluke 345 Power Quality Clamp Meter is a clamp on
meter that is ideal for monitoring electronic loads. The Fluke
345 combines the functions of a clamp meter, oscilloscope,
data logger and digital power meter. The Fluke 345 has a
color display to analyze the harmonic spectrum, a low-
pass filter to remove high frequency noise and a high EMC
immunity design. The Hall Effect clamp meter design makes
measurement of dc current possible without the need to break
the circuit.
Fluke 345 Power Quality Clamp Meter Features:
• Setup and troubleshoot variable frequency drives and
UPS systems
• Uncover harmonic issues that can damage or disrupt
critical equipment
• Inrush capture
• Verify electrical system capacity before adding loads
Fluke 345 Power Quality Clamp Meter Kit Contents:
• 345 Power Quality Clamp Meter
• Soft carrying case
• Power Log software
• Test leads
• Alligator clips
• Test probes
• USB cable
• International ac adapter / battery eliminator
• Printed English language user manual

PortablePowerMeters
Fluke 43B Series Power Quality Analyzer
Product Code: FLK-43B
TheFluke43BSeriesPowerQualityAnalyzereasilyidentifies
power quality problems such as circuit breakers that trip,
transformers that overheat and motors that burn out. The
Fluke 43B is optimised for industrial measurements on the 50
Hz fundamental frequency. It combines the capabilities of a
power quality analyzer, a 20 MHz oscilloscope, a multimeter
and data recorder into a single tool.
Fluke 43B Series Power Quality Analyzer Features:
• Calculates three-phase power on balanced loads from a
single-phase measurement
• Measures power harmonics, and captures voltage sags,
transients, and inrush currents
• Monitoring functions help track intermittent problems
and power system performance
• Menus use familiar electrical terminology
• 20 measurement memories
• FlukeViewSoftwarecanlogharmonicsandotherreadings
• Measures resistance, diode voltage drop, continuity and
capacitance
• NIMH Battery provides operating time of 6.5 hours
Fluke 43B Series Power Quality Analyzer Kit Contents:
• Fluke 61 IR Thermometer, VPS40 Voltage Probe
• i400s AC Current Clamp (400 A)
• AB200 Large Jaw Alligator Clips
• C120 Hard Case, OC4USB Interface/Adapter Cable
• SW43W FlukeView® Software for Windows + Power
Quality Video
• TP1 Slim Reach Test Probe Set (flat blade)
• AC20 Industrial Test Clips
• BB120 Banana-to-BNC Adapter
• BP120MH Ni-MH Battery Pack (installed)
• PM 8907 Battery Charger/Line Voltage Adapter
• TL24 Test Leads
• TP4 Slim Reach Test Probe Set (4 mm)
• Users Manual / Application Guide (CD-ROM)
• Getting started booklet
Fluke 190 Series II ScopeMeter
Product Code: FLUKE_190_204_S
TheFluke190SeriesIIScopeMeterisa four-andtwo-channel
scope built for CAT IV industrial environments. The Fluke 190
Series II ScopeMeter visually inspects signals amplitude, time,
shape and disturbance or distortion characteristics.
The Fluke 190 Series II ScopeMeter includes a multimeter,
TrendPlot™ and ScopeRecord™ roll paperless recorder modes
and hands-free operation with Connect-and-View™ triggering.
Fluke 190 Series II Scopemeter Features:
• Two or four electrically isolated inputs
• CAT III 1000V / CAT IV 600V safety rated
• Choose from 60 MHz, 100MHz or 200MHz bandwidth
models
• Fast sampling rate, up to 2.5GS/s with up to 400 ps
resolution
• Deep memory: 10,000 samples per channel waveform
capture so you can zoom in on the details
• Dedicated 5000 Count digital multimeter in 2 Channel
models
• Quad meter measurements via scope BNC inputs in 4
channel models
• Connect-and-View continuous auto-trigger, single shot,
pulse width, and video triggering
• ScopeRecord roll mode, capture waveform sample data
for up to 48 hours
• TrendPlot, trend measurement readings for up to 22 days
• Advanced automatic measurements, power (Vpwm, VA,
W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh
environments
• Isolated USB ports for memory devices and PC
connectivity
• Li-Ion battery for extended operating timespan
• Charge spare battery using optional external battery
charger EBC290
• Easy-access battery door to make it easy to swap batteries
• Color ScopeMeter, 200 MHz, 4 channels plus DMM/Ext.
input, with SCC-290 kit included

PortablePowerMeters
Fluke435SeriesPowerQualityEnergyAnalyzerFeatures:
• Power inverter efficiency
• Calculate the fiscal cost of energy waste due to poor
power quality
• Quantify the before and after installation improvements
in energy consumption
• Quickly diagnose problems on-screen to get your
operation back online
• Detect and prevent power quality issues before they cause
downtime
• Long-termanalysis–uncoverhard-to-findorintermittent
issues
• Load studies – verify electrical system capacity before
adding loads
• Simultaneously measure AC output power and DC input
power for power electronics systems using optional DC
clamp.
• Capture fast RMS data, show half-cycle and waveforms to
characterize electrical system dynamics (generator start-
ups, UPS switching etc.).
• Energy loss calculator
• Troubleshoot in real-time
• Measure all three phases and neutral
• Every measurement is always automatically recorded,
without any set-up
• Ten power quality parameters on one screen according
to EN50160 power quality standard
• Configure for any test condition with memory for up to
600 parameters at user defined intervals
• View graphs and generate reports
• Battery life has 7 hours operating time per charge on
Li-ion battery pack
Fluke 435 Series Power Quality Energy Analyzer
The Fluke 435 Series Power Quality Energy Analyzer
offers advanced power quality functions and unprecedented
energy analysis capabilities. It captures fast RMS values to see
every waveform so you can determine how the voltage, current
and frequency values are interacting.
Fluke 435 Series Kit Contents:
• Three-Phase Power Quality and Energy Analyzer
• BC430 Power Adapter, International plug adapter set
• BP290 (Li-ion battery) 28 Wh (8 hours or more)
• TL430 Test lead and Alligator clip set
• WC100 color coding clips and regional decals
• i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
• 8 GB SD card
• PowerLogonCD(includesoperatormanualsinPDFformat)
• USB cable A – Mini B

PortablePowerMeters
Fluke 1750 Three-Phase Power Recorder
The Fluke 1750 Three-Phase Power Recorder records
three-phase power quality and monitors for power quality
disturbances, with the help of included Fluke Power Analyze
software. The Fluke 1750 Three-Phase Power Recorder is a
power meter that automatically and continuously records
every power quality parameter and event, on every cycle.
The Fluke 1750 Three-Phase Power Recorder uncovers hard-
to-find issues, monitors critical equipment and captures power
quality events to correlate with equipment malfunction:
Fluke 1750 Three-Phase Power Recorder
• Quantify power quality throughout a facility
• Benchmark: power system prior to install
• Quick and reliable configuration using ARCHOS 43
Tablet
• Swap channels internally with the wireless PDA or PC
when connections are not correct
• Measure voltage and current on three phases, neutral,
and ground
Fluke 1750 Three-Phase Power Recorder Kit Contents:
• 1750 acquisition unit + Power cord (intl.)
• ARCHOS 43 Internet Tablet
• 4 – 400A current probes (3140)
• 5 Test leads and clips
• SD memory card
• Fluke Power View and Fluke Power Analyze software
• Ethernet cable
• Color localization set
• Printed Getting Started manual
• Product CD with software and user manual PDF
• CS 1750/1760 Rugged transit softcase
Fluke 1740 Three-Phase Power Quality Logger
The Fluke 1740 Series three-phase power quality loggers
are everyday power meters for technicians who troubleshoot
and analyze power quality issues. Capable of simultaneously
logging up to 500 power parameters for up to 85 days and
monitoring for events, these power loggers help uncover
intermittent and hard-to-find power quality issues.
Fluke 1740 Three-Phase Power Quality Logger Features:
• Uncover root cause of equipment malfunction for
predictive maintenance
• Validate incoming power quality at the service entrance
• Assess baseline power quality to validate compatibility
with critical systems before installation
• Performa load studies
• Performs energy and power quality assessment.
• Quick set-up with automatic current probe detection
• Compact, fully-insulated housing and accessories
• Included PQ Log software quickly analyzes trends and
generates reports
• Download data during recording without interruption
• Measure voltage with premium accuracy: IEC61000-4-30
Class-A compliant voltage accuracy (0.1%)
• Assess power quality according to EN50160 power quality
standard with statistical overview
• Durable insulated case with 2 year warranty
Fluke1740Three-PhasePowerQualityLoggerKitContents:
• 4 Flexible probes 15/150/1500/3000 A with 2 m cable
• CD-ROM with PQ Log software
• RS232 interface cable and RS232-USB adapter
• Test leads for voltages and power supply
• 4 black dolphin clips
• Color localization kit
• Carrying bag
• Test certificate with measurement values
• Printed English manual

PortablePowerMeters
Fluke 1760 Three-Phase Power Quality Recorder Features:
• High-speed transient analysis to uncover root causes of
equipment malfunction for predictive maintenance.
• Class-A quality-of-service compliance
• Event correlation at multiple locations
• Galvanic separation and DC coupling – allows complete
measurements on dissimilar power systems
• Power quality and power load studies
• Conduct tests according to the stringent international
IEC 61000-4-30 Class-A standard
• GPS time synchronization
• Flexible and fully configurable thresholds and scale
factors
• Uninterrupted power supply (40 minutes)
• 10 MHz, 6000 Vpk waveform capture
• 2 GB data memory
• Comprehensive software included
• Quick setup with automatic sensor detection.
Fluke 1760 Three-Phase Power Quality
Recorder
The Fluke 1760 Three-Phase Power Quality Recorder is
specifically designed for advanced power quality analysis and
consistent compliance testing. The Fluke 1760 Three-Phase
Power Quality Recorder is Class-A compliant to stand up to
the most demanding of power quality tests.
The Fluke 1760 is used for the for analysis of utility and
industrial power distribution systems, in medium- and low-
voltage networks. The Fluke 1760 Three-Phase Power Quality
Recorder provides the flexibility to customise thresholds,
algorithms, and measurement selections. The Fluke 1760
power recorder captures the most comprehensive details on
user-selected parameters.
Fluke 1760 Three-Phase Power Quality Recorder Kit
Contents:
• Power Quality Recorder Topas
• Internal Flash-memory 2 GB
• PQ Analyze software on CD-ROM
• Ethernet cable for network connection
• Crosslink Ethernet cable for direct PC connection
• Mains cable
• Operational manuals
• Carrying bag
If you have any queries on any of the above, please do not hesitate to email us at sales@powermeters.ie with your query.
Alternatively you can phone us and one of our experience technical support staff can deal with your query.

PortablePowerMeters
Unipower Unilyzer 902 Power Analyzer
Product Code: U902
The Unipower Unilyzer 902 Power Analyzer is a portable
power analyser that records power quality measurements in
out-of-the-control-room environments.
The Unilyzer 902 power analyzer is a dust- and splash-proof
(IP65), norm-compliant (IEC 61000-4-30, Class A) and 3rd
party-certified field instrument. Using DSP (Digital Signal
Processor) the Unilyzer 902 measures all periods without time
gaps. Built-in hardware locks to the fundamental frequency,
which gives the Unilyzer 902 the highest possible accuracy.
Unilyzer 902 features options for remote communication, e.g.
GSM modem. This means that data can be downloaded and
re-configured from the office, without having to go to the
location where it is installed. Four independent trig channels
capture sags, swells, transients and interruptions. It can also
connect to a PC, which provides access to an eight-channel
oscilloscope, a harmonic spectrum analyser and a trend-
graph. The phasor diagram gives valuable information about
phase relationships and instrument wiring.
PQ Secure software accumulates all measured data which
is transmitted to a main SQL database. Export data and
measured files to other software, for instance spreadsheets.
Unipower Unilyzer 902 Power Analyzer Functions:
• Automatic transducer identification
• Quantities and units like V, A, W, VA, VAr, kWh, kVArh,
PF, Cosj, Hz, IFL, PST, PLT.
• Transients 1 ms
• Voltage sags (dips) and swells
• Flicker
• Harmonics. Odd, even, interharmonics and directions.
• Current and voltage unbalance
• Signalling voltage
• K-factor for transformers
• All power quality parameters measured simultaneously
Direction for power harmonics and disturbance
Unipower Unilyzer 900 Power Network Analyser
Product Code: Unilyzer 900 S-T
A challenge for power distribution companies is to maintain a
stable voltage supply in the customer delivery point. Customer
complaints are often based on unstable voltage conditions.
This can be due to varying loads in the customer installation.
The combination of load and network impedance must
therefore be monitored to determine best solution.
The Unilyzer 900 is designed for electric power distribution
companies to explore customer complaints but it can be
used by anyone wanting to troubleshoot problems or to do
optimisations in the power network.
The integrated wireless modem and router allows automatic,
remote download of data as well as realtime analysis and
configuration.
Unilyzer Unilyzer 900 Power Analyzer Features:
• It’s small size with IP65 protection and ruggedness makes
Unilyzer 900 an idyllic tool for all field measurements.
• No moving parts and has been tested in real, tough
environments.
• Complies with IEC 61000-4-30 Class A for Power Quality
measurements.
• Standard memory allows data to be stored for 5 months.
In case of a power failure it has an internal battery backup.
• Gapless measurements and algorithms in accordance
with IEC 61000-4-30 Class A
• Measures power and energy in all 3-phase Wye and Delta
configurations
• Unique method for data compression and storage saving
memory usage and thus saving transfer times and costs
• 170 days of measurements with 32 MB standard memory
UNIPOWER POWER QUALITY METERS
Powerpoint Engineering Ltd is the authorised distributor for Unipower in Ireland, supplying the full range of Unipower Power
Quality Meters Portable PQ Meters.

PortablePowerMeters
Unipower UP-2210R Rack Mount PQ
Measuring Unit
Product Code: UP-2210R
The Unipower UP-2210R Rack Mount PQ Measuring Unit
is a IEC 61000430 Class A Power Quality Analyzer and Fault
Recorder targeted on MV and HV applications.
Unipower PQ Secure
PQ Secure lets you monitor your power quality continuously
and gives you a complete picture of the status in the power
network, logging all critical parameters giving direct response
on any deviation.
UP2210R Comes in a convenient 19” case that fits easily in
the sub-station control cabinets. The hardware is based on
Unipowers class A platform and measures all Power Quality
parameters, does fault recording and energy metering as well
as advanced disturbance recording.
Unipower UP-2210 Power Quality Measure
Unit
Product Code: UP-2210
The Unipower UP-2210 Power Quality Measure Unit
functions as an advanced power quality meter and at the same
time as a fault recorder.
The Unipower UP-2210 Power Quality Measure Unit are
the nodes of which the PQ Secure system consists. For fully
reliable data and reference measurements, each Unipower UP-
2210 unit is certified in accordance with the measure standard
IEC 61000-4-30, Class A.
TheUnipowerUP-2210capturesbothsteadystatedisturbances
(harmonics, flicker etc) as well as rapid voltage changes (sag/
swell events and fast transients). All power quality parameters
can be analysed in accordance with voltage quality standards
such as the EN 50 160.
Unipower PQ Secure system will automatically transfer data
from the Unipower UP-2210 units to the central database,
analyse the measure result and show an event list or graphical
data. The software also has an automatic report generator that
can create reports in accordance with international voltage
standards such as EN 50160.
Unipower UP-2210 Power Quality Measure Unit Features:
• Complies with EMC: EN 50081-1,2 EN 50082-1,2
• Voltage characteristics: EN 50160, EN 61000-2-2, EN
61000-2-12
• Harmonics: IEC 61000-4-7
• Flicker: IEC 61000-4-15
• Power quality measurement methods: IEC 61000-4-30,
Class A

PortablePowerMeters
MAVOWATT 40 3-Phase Energy Power
Disturbance Analyzer
Product Code: MAVOWATT 40
The Gossen Metrawatt MAVOWATT 40 3-Phase Energy
Power Disturbance Analyzer is a class A device that
simultaneously monitors RMS values, harmonics, flicker and
transients down to a time range of approximately 80 µs. It has
8 measuring channels: 4 for voltage and 4 for current.
Gossen Metrawatt MAVOWATT 40 Features:
• Power and mains disturbance analysis
• 8 measuring channels: 4 for voltage 4 for current at 50
/ 60 Hz power frequency
• Data storage to CompactFlash memory cards ≥4 GB
The Gossen Metrowatt MAVOWATT 50 is an energy and
power disturbance analyzer that measures electrical quantities
in DC systems, as well as in single and three-phase AC systems
with any load. The MAVOWATT 50 features eight isolated
measuring circuits – four each for voltage and current.
• Complete power disturbance analysis with simultaneous
measurement of all relevant mains quantities
• Power and energy analysis in power supply systems
Analyzer
Product Code: MAVOWATT 20 SET 1
The MAVOWATT 20 3-Phase Energy Power Analyzer is
used to interpret utility costs, improve efficiency, install energy
savings devices, explore alternative energy solutions or even
determine your carbon footprint.
• AdvancedDemand,Energy,HarmonicsandPowerAnalysis
• Automatic setup – No learning curve!
• Easy to read colorful Demand Energy reports
• CarbonFootprintCalculator–Evaluateenvironmentalimpact
• Intuitive color touch screen
Power Disturbance Analyzer is a power and mains
disturbance analyzer that fulfills the standards EN50160,
EN61000-4-7 and EN61000-4-15 and EN61000-4-30.
• Harmonic analysis per EN 61000-4-7
• Built in accumulator for up to 3 hour operating time
• High performance DranView PC analysis software
GOSSEN METRAWATT POWER QUALITY METERS
We supply the full range of Gossen Metrawatt Power Quality Meters Portable PQ meters including the Gossen Metrawatt
MAVOWATT Power Disturbance Analyzers METRAHIT Digital Multimeters.

PortablePowerMeters
METRAHIT ENERGY Digital Multimeter
Product Code: METRAHIT ENERGY
The Gossen Metrawatt METRAHIT ENERGY Digital
Multimeter is a digital hand-held multimeter which takes a
current and voltage measurement with a resolution of 60,000
counts.
Gossen Metrawatt Metrahit Energy Digital Multimeter
Features:
• TRMS measurement including: V AC TRMS, V AC+DC
TRMS with a bandwidth of 100 kHz, V DC, dB, Hz (V),
Hz (A), Ω, μF, V Diodes, °C / F (TC / RTD)
• Power measurement (W, VAr, VA, PF): active, reactive
and apparent power with extreme values, power factor
• Energy measurement (Wh, VArh, VAh), active, reactive
and apparent energy, mean power value with adjustable
observation period and maximum value
• Mainsqualityanalysis:recordingofoverandundervoltage,
dips, swells, voltage peaks and transients in 0, 50 and 60
Hz systems
• Harmonic analysis: RMS values and distortion
components up to the 15th harmonic at 16.7, 50, 60 and
400 Hz
• Crest factor CF, conductivity nS, low resistance RSL, duty
cycle %, cable length km
• Resolution of 60,000 counts
• Triple display, display illumination can be activated under
difficult lighting conditions
• 1 kHz / -3 dB low-pass filter can be activated
• Direct current measurement from 10 nA to 10 A, 16
A intermittently, current measurement with current
transformer clamp and sensors, transformation ratio is
taken into account at the display
• Large data memory for up to 300,000 measured values
• Instrument is completely remote controllable without
activating the rotary switch or changing current sockets
Power Disturbance Analyzer is a power and mains
disturbance analyzer. The MAVOWATT 70 fulfills the
standards EN50160, EN61000-4-7 and EN61000-4-15, as well
as EN61000-4-30. It is a class A device that simultaneously
monitors RMS values, harmonics, flicker and transients down
to a time range of approximately 80 µs. The MAVOWATT
70 has 8 measuring channels: 4 for voltage and 4 for current.
• Harmonic analysis per EN 61000-4-7
• Mains quality per EN50160 with statistic bar chart
• Flicker analysis per EN 61000-4-15
• Recording of switch-on effects and fault note
• Integrated analysis module for the direction of the voltage
drop, switching tops of the power factor correction and
the quality of motors
• Extended functionality of the power analysis
• Measurement of fast transients with 1 MHz sampling rate
• 8 measuring channels: 4 for voltage (differential) and 4
for current (current sensor), for measurements at 50 / 60
Hz power frequency
• Data storage to CompactFlash memory cards ≥4 GB
• Power supply via charging device 90..264 V / 47..63 Hz
• Built-in accumulator for up to 3 hour operating time
• Optional RS232, USB or LAN interface
• Optional current measuring accessories
• High performance DranView PC analysis and evaluation
software is available
• Special version for 50 / 60 Hz and 400 Hz mains frequency
– MAVOWATT70-400

PortablePowerMeters
simultaneously. The recorded information can be viewed via
the built-in graphics display, downloaded to a computer using
the serial interface and optional modem, or transferred using
the optional removable Flash Memory Module.
Megger offers a comprehensive line of self-powered (no
batteries required) flexible and clamp-on current probes
for use with the entire PA-9 Series. If you would prefer to
use your own probes, simply order the applicable Megger
adapter
Megger PA9Plus Power Quality Analyser Features:
• Designed to comply with all applicable IEC, IEEE, EN
Standards
• Complies with CE marking
• On-site analysis data retrieval without a computer
• Intelligent Download —Select only the data required
• Trends Harmonics, THD TDD
• Provides real-time graphical display of individual
harmonic power
• Includes AVO Metrosoft® software
• Remote communications alarm capabilities
• CE marked and adheres to applicable European standards
(EN50160, IEC61000 series, IEEE1159, IEEE519)
MEGGER PA9Plus Power Quality Analyser
Product Code: PA9 Plus
The Megger PA9Plus is the latest innovation of the
successful PA-9 Power Quality Analyzer platform. It
incorporates newly enhanced key features including a
faster Digital Signal Processor (DSP) to support continually
evolving capabilities, a full 12 MB of nonvolatile internal
memory and standard auxiliary power input capabilities.
To address worldwide requirements and applications, the
PA9Plus is CE marked, supports several international
languages, and adheres to applicable European and North
American standards (EN50160, IEC61000-4-15, IEEE1159,
IEEE519), including automatic phase lock loop
synchronization of input frequencies ranging from 20 Hz
to 70 Hz, flicker measurements and recording, and out of
limits/frequency trending.
The optional removable memory capabilities allows
internally recorded data to be copied directly to an
external standard compact flash card using the same
technology available with most of today’s digital cameras.
The standard software has been enhanced to fully support
the new functionality and is included at no cost with every
PA9Plus purchased. A new, optional report generator has
also been developed to support your customized
documentation/reporting needs.
ThePA9Plusrecordspowerqualityandpowerflowinformation
MEGGER POWER QUALITY METERS
Powerpoint Engineering Ltd is the authorised distributor of Megger in Ireland. We supply the latest Megger Power Quality Meters
Portable Power Quality Meters.

PortablePowerMeters
Extech 3-Phase Power Harmonics
Analyzer
Product Code: PQ3350/1, PQ3350/3
Power Measurements and Analysis + Datalogging of single
and 3-phase/3-wire or 3-phase/4-wire systems plus datalogs
to 52,428 single phase readings or 17,476 3-phase readings.
3-Phase Power Harmonics Analyzer Features:
• Two models to choose from:
Model PQ3350-1 (1200A 12” flexible current clamp probes)
Model PQ3350-3 (3000A 24” flexible current clamp probes)
• Flexible clamp probes can be used for wrapping around
bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in
one screen
• Clamp-on True RMS power measurements with on-
screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/
period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with
programmable period
• Adjustable CT ratio (1 to 3000) and VT ratio (1 to 600)
• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR,
VIR) and Unbalanced Factor (d0%, d2%)
• Calculated Unbalanced Current through Neutral Line (In)
• Capture 28 Transient events (including Dip, Swell and
Outage) with programmable threshold (%)
• Optically isolated USB interface with software to
download
• Waveforms, Power Parameters and Harmonics
Extech PQ3450 3-Phase Power Analyzer/
Datalogger
Product Code: PQ3450
The Extech PQ3450 3-Phase Power Analyzer/Datalogger is
a datalogging power analyzer that can take up to 30,000 sets
of measurements. The EXTECH PQ3450 saves data on an
SD card in Excel format for easy transfer to a PC for analysis.
Extech PQ3450 Features:
• Large dot-matrix, sun-readable, numerical, backlit LCD
• Full system analysis with up to 35 parameters
- V (phase-to-phase), V (phase-to-ground)
- A (phase-to-ground)
- KW / KVA / KVAR / PF (phase)
- KW / KVA / KVAR / PF (system)
- KWH / KVAH / KVARH / PFH (system)
- Phase angle
• Select 200A, 1200A Current Clamps or 3000A Flexible
Current Probes (sold separately)
• Adjustable Current Transformer CT (1 to 600) and
Potential Transformer PT (1 to 1000) ratio for high power
distribution systems
• Log up to 30,000 reading on a removable SD memory
card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Built-in Clock and Calendar
• Easy-to-use onscreen menu
• Easy-to-hold rugged over molded housing
EXTECH POWER QUALITY METERS
Powerpoing Engineering Ltd is the authorised distributor of Extech in Ireland. We supply a full range of Extech Power Quality
Meters, Extech Power Harmonics Analyzers, Clamp-on Meters Test Leads.

PortablePowerMeters
Extech 380801 Single Phase Power Analyzer
Product Code: 380801
The Extech 380801 Single Phase Power Analyzer is a True
RMS Single Phase Power Analyzer Appliance Tester/Power
Analyzer.
The Extech 380801 is a compact, battery operated device for
analyzing AC power loads with PC interface and datalogging.
It can be used for data acquisition when connected to a PC.
Extech 380801 Features:
• Four simultaneous displays of Watts, Power Factor or VA,
Voltage or Hz, Amps
• True RMS Voltage Current measurements of sine,
square, triangular and distorted wave forms with a crest
factor 5
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Plug device to be tested directly into the Power Analyzer
• Sampling (update) rate is 2.5 times/second
• Windows® 95/98/NT/2000/XP/ME software allows user
to download stored data or save data directly, and to
create an ASCII file. Computations include phase angle,
apparent and reactive power, consumption and cost, and
power factor correction
• Complete with Windows compatible software, cable, 8
x AA batteries, power cord, 117 VAC adaptor and case
Applications:
• Measure and Audit power consumption of single phase
devices
• Evaluate load performance under varying line conditions
• Demonstrate effectiveness of power conservation efforts
• Characterize device AC power requirements
Extech PQ3470 3-Phase Graphical Power
Harmonics Analyzer
The Extech PQ3470 3-Phase Graphical Power Harmonics
Analyzer is a power and harmonics analyzer, datalogging
for up to 30,000 sets of measurements. The PQ3470 saves
data on an SD card in Excel format for easy transfer to a PC
for analysis.
Extech PQ3470 Features:
• Large dot-matrix, sun-readable, graphical, backlit LCD
• Full system analysis with up to 35 parameters
- V (phase-to-phase), V (phase-to-ground)
- A (phase-to-ground)
- KW / KVA / KVAR / PF (phase)
- KW / KVA / KVAR / PF (system)
- KWH / KVAH / KVARH / PFH (system)
- Phase angle
• Select 200A, 1200A Current Clamps or 3000A Flexible
Current Probes (sold separately)
• Adjustable Current Transformer CT (1 to 600) and
Potential Transformer PT (1 to 1000) ratio for high power
distribution systems
• On-screen Harmonics display (1 to 50th order)
• Display of Waveform with peak values
• Analysis of Total Harmonic Distortion (THD)
AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and
outage) with programmable threshold (%)
• Log up to 30,000 readings on a removable SD memory
card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Captured measurements can be imported directly into
Excel via the SD memory card

PortablePowerMeters
Extech 380940 True RMS AC/DC Watt
Clamp-on (400A)
The Extech 380940 True RMS AC/DC Watt Clamp-on is
a 400A AC/DC Watt clamp-on meter that measures Watts,
Current, and Voltage With AC/DC True Power measurements
to 240kW.
Extech 380940 True Rms Ac/Dc Watt Clamp-On Features:
• True RMS AC Voltage and Current
• 0.9” (23mm) jaw opening
• Large 4000 count LCD display
• Fast 40 segment analog bargraph
• Data Hold, Max/Min recall, Auto Zero (DC current), plus
low battery indication
• Frequency to 10kHz
• Auto power off
• Complete with test leads, 2 AA batteries, and carrying case
Specifications: Range Resolution Accuracy
±(%rdg+digits)
Input Signal
Range
AC Power 40kW 10W ±(1.5% +
3d)@50/60Hz
0-250V, 0-400A,
PF 0-1
240kW 100W ±(1.5% +
3d)@50/60Hz
0-600V, 0-400A,
PF 0-1
DC Power 40kW 10W ±(1.5% + 3d) 0-250V, 0-400A
240kW 100W ±(1.5% + 3d) 0-600V, 0-400A
AC Current 400A 0.1A ±(1.5% +
3d)@50/60Hz
Overload
protection: 600A
AC
(AC frequency
range 40Hz-
1kHz)
DC Current 400A 0.1A ±(1.5% + 3d) Overload
protection: 600A
DC
AC Voltage 600V 1V ±(1.5% +
2d)@50/60Hz
Overload
protection: 800V
AC
DC Voltage 400V 0.1V ±(1.0% + 2d) Overload
protection: 800V
DC
Frequency 10kHz 0.01-
100Hz
±(0.8% + 2d) Overload
protection: 600V
AC
Dimensions 7.2 x 2.5 x 1.4” (183 x 64 x 36mm)
Weight 6.7oz (190g including batteries)
Extech 382091 3-Phase Power Analyzer/
Datalogger (50 Hz,1000A)
The Extech 382091 3-Phase Power Analyzer/Datalogger is a
1000A 3-Phase Power Analyzer/Datalogger (50 Hz) with four
clamps for power measurements on single phase, 3-phase/3-
wire or 3-phase/4-wire systems. The EXTECH 382091 dispalys
10 parameters simultaneously.
• Large backlighting LCD displays 10 parameters
simultaneously (kW, kVAR, kVA, PF plus the voltage and
current of the 3 phases)
• Up to four current probes can be connected to the
analyzer
• Clamp-on True RMS power measurements with software
• for Harmonics analysis
• Displays Active Power (kW), Apparent Power (kVA),
Reactive Power (kVAR) and Power Factor
• Current measurements to 1000A and Voltage
measurements to 600V kWH, kVARh and kVAh energy
measurements
• Automatically logs up to 20,000 sets of measurements
and manually logs up to 99 sets
• Programmable Start/Stop datalogging times
• PC interface with Windows® 95/98/NT/2000/ME/XP
compatible software for single and three phase voltage/
current Waveform display and Harmonic analysis
• Phase sequence measurements
• Auto power off with disable feature
• CAT III-1000V, UL Listed; CE approved; 1yr warranty

PortablePowerMeters
Extech 382096 3-Phase Power Harmonics
Analyzer (220V,1000A)
The Extech 382096 3-Phase Power Harmonics Analyzer
is a 1000A 3-Phase Power Harmonics Analyzer for power
measurements and analysis of single and 3-phase/3-wire or
3-phase/4-wire systems.
• Clamp-on True RMS power measurements with on-
screen Harmonics display (1-99th order)
• DisplayofWaveformwithPeakValues(1024samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Displays Active Power (kW), Apparent Power (kVA),
Reactive Power (kVAR) and Power Factor
• kWH and kVARh energy measurements
• Maximum Demand (MDkW, MW, kVA, MVA) with
programmable period
• Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
VIR) and Unbalanced Factor (d0%, d2%)
• Calculated Unbalanced Current through Neutral Line (In)
• Datalogger records up to 52428 records in single
phase,(17476 records in 3-phase)
• Capture 28 Transient events (including Dip, Swell and
Outage) with programmable threshold (%)
• Optically isolated RS-232 interface with software to
download Waveforms, Power Parameters and Harmonics
Extech 382068 AC/DC Clamp-on Power
Datalogger (1000A)
The Extech 382068 AC/DC Clamp-on Power Datalogger is
1000A AC/DC Clamp-on Power Datalogger Kit that datalogs
up to 4000 readings. The EXTECH 382068 AC/DC Clamp-
on Power Datalogger captures data and transfers to a PC for
analysis and report generation.
• 1000A Clamp measures single f (phase) or 3f power to
600kW
• Display True Power, Apparent Power, Power Factor, True
RMS Voltage and Current, Resistance and Frequency
• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
• Clamp jaws open to 1.8” (46mm)
• Built-in recorder datalogs up to 4000 readings or
download to a PC
• 25 point data memory viewable on the LCD display
• Data Hold and Auto power off
• Full function display on large 4-digit LCD with fast 40
seg. bargraph, Peak Hold, and MIN/MAX
• Complete with Clamp-on Meter, 9V battery, alligator
clips, test leads, Datalogger/RS-232 module, PC software
with cable, and case
Extech PQ1000 Voltage Test Leads
The Extech PQ1000 Voltage Test Leads is a set of 4 test leads with
alligator and plunger clips. These Test Leads are compatible with
PQ3400 series of power analyzers.
If you have any queries on any of the above, please do not hesitate
to email us at sales@powermeters.ie with your query. Alternatively
you can phone us and one of our experience staff can deal with
your query.

PortablePowerMeters
ELECTROCORDER ENERGY METERS
We supply a full range of Electrocorder Energy Meters, Electrocorder Multi-channel Voltage Logger, and Single to Multi-phase
Voltage Current Loggers. We are the authorised Electrocorder distributor in Ireland.
DC-3V Three Channel Voltage Logger
Product Code: DC-3
The DC-3V is ideal for monitoring and recording one, two
or three channels of DC voltages from 1Vdc to 300Vdc, for
example from batteries, circuit breaker trip batteries, charging
circuits, power supplies, photovoltaic (PV) cells, DC motor
circuits, DC Generators, DC telecoms circuits… We can
extend the range to 300Vdc if needed. Using appropriate
transducers or signal conditioners, you can record many
parameters, temperature, solar irradiation, wind speed.
DC-3V Three Channel Voltage Logger Features:
• Ideal for industrial logging
• Voltage Range: 60V or 300V
• Voltage Accuracy: 1V – 5V 2%, 60V model, 6V – 60V
1%. 300V model 60V – 300V ~2%
• CAT Rating: CAT II
• Recording Period: 1 sec to 60 mins
• Recording Standard: Recording – EN50160: 1994
• Environmental Sealing: IP43 as standard, available as
IP65/NEMA 12/4
• Size Weight: Metric – 260x180x190mm 2kg
DC-3V Kit Contents:
• 60V Data Logger
• Unfused Voltage Input Leads
• USB Lead
• 12Vdc PSU
• Electrosoft Software
• Carry Case
CT-1A Single Phase Current Logger
Product Code: CT-1A
The CT-1A Data Logger is used by householders, companies,
facilities management, power management and optimisation
companies to monitor loads from 0.1A to 100A, model
dependent. It can be used for energy audits and the monitoring
and logging of new low energy products, eg, LED lighting, low
energy bulbs. It can be used to record earth leakage currents,
providing the currents are over 0.1A.The current transformer
breaks open, allowing it to be placed around the cable without
having to break the main circuit.
CT-1A Single Phase Current Logger Features:
• Current Range: 10A, 50A or 100A
• CTs fit around 30mm cables
• Current Accuracy: ±2% of range, typically
• Records true RMS Iavg, Imax Imin
• Recording Standard: Recording – EN50160: 1994
• Environmental Sealing: IP65 as standard
• Size Weight: Metric – 126x75x45mm 300g
CT-1A Kit Contents:
• Data Logger
• Voltage Input Lead
• One Clamp-On CT
• RS-232 Serial Lead
• Carry Case

PortablePowerMeters
EC-1A Single Phase Current Logger
Product Code: EC-1A
The EC-1A Data Logger is used by power distribution
companies, facilities management, power management and
optimisation companies to monitor loads from 5A to 10kA,
model dependent. It can be used for energy audits and the
monitoring and logging of new low energy products.
EC-3A Three Phase Current Logger
Product Code: EC-3A
The EC-3A is used to determine feeder loading and mainly
used by power distribution companies, heavy industry,
facilities management, electrical or site services and
maintenance engineers to monitor loading variations on site
helping them to diagnose any related issues, transformer and
feeder sizing problems.
EC-1A / EC-3A Phase Current Logger Features:
• Enables current and load problems to be highlighted for
further investigation
• Allows users to record load currents up to 10kAac / 3kAac
respectively, range is model dependent.
• Records true RMS Iavg, Imax Imin
• Environmental Sealing: IP65 as standard
EC-3V Three Phase Voltage Logger
Product Code: EC-3V
The EC-3V is used by power distribution companies, voltage
and energy optimisation companies, facilities management,
electrical or site services and maintenance engineers to
monitor voltage variations on site helping them to diagnose
any voltage related issues, or to gather data perhaps to make
representations to their power supplier.
EC-2VA Single Phase Voltage Current
Logger
Product Code: EC-2VA
The EC-2VA data logger is used by power distribution
companies, facilities management, electrical or site services
and maintenance engineers to monitor both voltage and
current variations.
EC-3V / EC-2VA Single Phase Voltage Current Logger
Features:
• Voltage Range: 300Vrms
• Current Range: 300A
• Rogowski Coils fit around 140mm cables
• Voltage Accuracy: ±2% of reading (10 bit) within 90Vac
– 300Vrms otherwise ±3%. (50/60Hz ±2%)
• Current Accuracy: 2% of range, typically

PortablePowerMeters
EC-7VAR Three Phase Voltage, Current Power Factor Data Logger
Product Code: EC-7VAR
The EC-7VAR PQA is used by electrical contractors, power
distribution companies, facilities management, electrical or
site-services and maintenance engineers. It is used to monitor
power (kW)/energy (kWh) usage, check voltage and current
variations helping them to diagnose any related issues, or to
gather data perhaps to make representations to their power
supplier.
Widely used for UPS sizing and monitoring and standby
generator sizing and monitoring. As the product records
both voltage and current, users can determine if low voltage
is related to high current demands on site, or if the low voltage
is being supplied to the site.
Setting up the Electrocorder EC-7VAR is easy, suitable for
non-technical staff. Using the supplied (free) Windows
software, Electrosoft; input the location details for the
logging and choose the logging period. Electrosoft will print
the necessary dispatch/return documentation including user
instructions. All data is included in a database of dispatches
and returns, allowing you to track the location of multiple
loggers.
EC-7VAR Kit Contents:
• Data Logger
• Rogowski Transducers
• Voltage Leads
• USB Lead
• Carry Case
The EC-7VAR is specifically designed to monitor one, two or
three current channels, as well as one, two or three voltage
channels plus Power Factor. Power Factor recorded is the
phase angle between L1 and A1.
EC-7VAR Three Phase Voltage, Current Power Factor
Data Logger Features:
• Ideal for industrial logging PQA
• Voltage Range: 500Vac
• Current Range: 400A, 1kA, 2kA or 3kAac
• Rogowski Coils fit around 140mm cables
• Voltage Accuracy: ±1% of reading, ±1 Volt. (10 bit) within
100Vac-450Vrms (ph–ph); else ±3%. (50/60Hz ±2%)
• Current Accuracy: ±2% of reading, typically (within 10%
– 90% of full scale), otherwise 3% of full scale
• Power Factor Accuracy: Accurate to ~3% between lead
0.5 and 0.5 lag; ~6% between 0.5 and 0.3 lead or lag
• CAT Rating: 1000V CAT III, 600V CAT IV
• Records true RMS Vavg, Vmax Vmin to 2%
• Records true RMS Iavg, Imax Imin to 5%
• Recording Standard: EN50160: 1994
• Environmental Sealing: IP43 as standard, available as
IP65/NEMA 12/4
• Size Weight: Metric – 260x180x190mm 2kg
If you have any queries on any of the above, please do not hesitate to email us at sales@powermeters.ie with your query.
Alternatively you can phone us and one of our experience technical support staff can deal with your query.

MeasuringTransducers
Sineax M563 3-Phase Transducers (Programmable)
Product Code: M563
The Sineax M563 3-Phase Transducer is a programmable multi-
funtion transducer with 3 analog out and RS232. The Sineax M563
is used for simultaneously acquiring 3 freely selectable measured
quantities in electrical systems. It is equipped with 3 electrically
isolated current outputs.
Sineax M563 3-Phase Transducer Features:
• 3 analogue outputs
• 100 to 693 V (phase to phase) programmable
• High accuracy: class 0.5
• Software with password protection
MEASURING TRANSDUCERS
We supply the full range of Gossen Metrawatt Sineax Measuring Transducers, Multifunction Meters display units. We are
authorised distributors for Gossen Metrawatt in Ireland.
SINEAX VOLTAGE TRANSDUCERS
Sineax U553 Single Phase Measuring
Transducer
Product Code: U553
The Sineax U553 Transducer converts a sinusoidal or a
distorted AC voltage into a load independent DC current or
a load independent DC voltage proportional to the measured
value.
The transducer fulfils all the important requirements and
regulations concerning electromagnetic compatibility EMC
and Safety (IEC 1010 resp. EN 61 010). It was developed and is
manufactured and tested in strict accordance with the quality
assurance standard ISO 9001. The SINEAX U553 is supplied
with power supply terminal.
Sineax U553 Single Phase Measuring Transducer Features:
• Measurement method: logarithmic process
• Measurement input: alternating voltage, sinusoidal or
distorted, true RMS value measurement
• Nominal input voltage: 0…20 to 0…690 V
• Measurement output: unipolar and live-zero
PROGRAMMABLE TRANSDUCERS
Paladin Advantage Universal Programmable
Transducer
Product Code: 254-XZZ
The Paladin Advantage, 254-XZZ, is a programmable
transducer which provides measurement isolation and
conversion of all main electrical parameters into an industry
standard DC output signal. The 254-XZZ can be used in single
and three-phase balanced or unbalanced three or four-wire
electrical systems. The 254-XZZ has an accuracy of CL0.2 and
includes RS485 Modbus RTU communications protocol and
pulse/alarm output as standard.
Paladin Advantage Universal Programmable Transducer
Features:
• DIN-rail enclosure
• Measurement, isolation and conversion of up to 4
parameters
• RS485 Modbus RTU protocol
• Alarm/pulsed output
• Programmable VT/CT ratio

MeasuringTransducers
MEASURING TRANSDUCERS
Sineax DME 400, 401, 406 3-Phase Transducers (Programmable)
Product Code: DME 400, DME 401, DME 406
The Sineax DME 4 series of multi-transducers simultaneously measure several variables of an electrical power system and
process them to produce 2 resp. 4 analogue output signals. 2 or 4 digital outputs are available for signalling limits or energy
metering. The multi-transducers are also equipped with an RS 232 serial interface to which a PC with the corresponding software
can be connected for programming or accessing and executing useful ancillary functions.
The usual modes of connection, the types of measured variables, their ratings, the transfer characteristic for each output etc. are
the main parameters that have to be programmed. Ancillary functions include a power system check, provision for displaying
the measured variable on a PC monitor, the simulation of the output for test purposes and a facility for printing nameplates. The
transducer fulfils all the essential requirements and regulations concerning electromagnetic compatibility (EMC) and safety. It
was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001
Sineax DME 400 Sineax DME 401 Sineax DME 406
• LONWORKS Interface
• Simultaneous measurement
• Input Voltage: up to 693V
• High Accuracy: U/I/P 0.2%
• Up to 4 integrated energy meters
• Software with Password Protection
• MODBUS Interface of Data Transfer
• Input Voltage: up to 693V
• High Accuracy: 0.2%
• Provision for Snap to Top-hat rails
• PROFIBUS-DP or RS232 Interface
• Mean Values: Various Functions
• Accuracy Class 0.2
• Adjustable conversion factor
Sineax DME 424 / 442 3-Phase Transducer (Programmable)
Product Code: DME 424, DME 442
The Sineax DME 424 / 442 3-Phase Transducer is a programmable
multi-transducer for simultaneously acquiring several quantities
in heavy current systems. The output quantities of the analog
outputs can be configured as load-independent direct current or
direct voltage signals.
Sineax DME 424 / 442 3-Phase Transducer Features:
• Simultaneous measurement of several variables
• Up to 6 outputs (2A + 4D or 4A + 2D)
• Input voltage: up to 693 V
• Universal analogue outputs (programmable)
• High accuracy: U/I/ 0.2% and P 0.25%
• Universal digital outputs (meter transmitter, limits)
• Up to 2 or 4 integrated energy meters
• AC/DC power supply / universal
• Option to either snap the transducer onto top-hat rails or secure
it with screws to a wall or panel

Power Meters Brochure

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to Power Meters Brochure

Similar to Power Meters Brochure (20)

Power Meters Brochure