Get Resistance converters with better accuracy at Canopus Instruments India. These modules are energy efficient and highly qualified. Contact us to know more. http://www.canopusinstruments.com/product-category/industrial-automation-product/resistance-temperature-detector-scanner/?utm_source=google&utm_medium=pdf&utm_content=submission

1. ISO 9001:2008
Certified
SIGNAL CONDITIONING &
IS0LATION
INPUT : POTENTIOMETER
Features
 Input: Potentiometer
 Universal Power supply
range 90-270VAC,
50Hz/60Hz or 100-250 VDC.
 Energy Efficient Module.
 Low Noise & Low drift for
long term stability.
 Response Time < 1mSec.
 2kv 3 Port Isolation.
 Duplex isolator version
option.
 Design Tested & Certified for
compliance with CE
Standards.
DC ISOLATING AMPLIFIER
(INPUT POTENTIOMETRIC) TYPE: SIM MINI1.0
Overview
Potentiometer signals are typically generated in position control applications. The SIM Mini
1.0 modules generate the excitation voltage required for powering the potentiometer
device and measure the voltage variation at the wiper of the potentiometer. The isolated
output 0-10V/4-20mA signal is provided to interface the Measuring system with the position
feedback signal.
The SIM Mini 1.0 modules operate from 90-270Vac power supply.
General Specifications
Isolation 2KV - 3 Port.
Power Supply 90-270VAC, 50/60Hz or 100-
250VDC.
Power Consumption 9 VA Approx.
Enclosure
ABS Plastic,
35 mm DIN Rail
Mounted. IP40
Protection class.
Single Output W - 55mm
H - 75mm
D - 110mm
Dual output W - 100mm
H - 75mm
D - 110mm
Operating temp.
range
0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0 – 90%
RH Non-Condensing
Max. Altitude 3000 mts above MSL
Technical Specifications
Potentiometric
Input Signal
Input Options:
0- 1KOhm, 0-5KOhm, 0-10KOhm. Factory Set
Input
Impedance
For Potentiometric 1M Ohm
Voltage Sourcing
(Vs)
Vs: 10VDC (10mA Max.)
Output Signal Output Options:
0-5VDC,0-10VDC,0-20mA,4-20mA. Factory Set
No of Outputs Two (Max)
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance Accuracy ±0.2% of Span
Linearity 0.1%
Temperature Drift 0.01% / °C
Response Time < 1mSec
Calibration Zero & Span (Trimpot)
Applications
 AC/DC Drive systems
 PLC Systems
 Data Acquisition Systems
Related Products
 4-20mA Signal Isolator, 24V DC supply, 1/2/3 /4 Isolated Outputs.
 Analog Signal Isolator, Isolation Level 5KV.
 4-20mA Signal Multipliers, 24VDC/90-270VAC supply.

2. Address: #2 & 3, ‘Vishwas’, Karnik Road, Off. Murbad Road, Kalyan (W) 421 301, Maharashtra, INDIA.
Tel: +91-251-2322576 / 2203389 Telfax: +91-251- 2325849.
Email: marketing@canopusinstruments.com Website: www.canopusinstruments.com
Ordering Information:
Mechanical Details:
Single input & Single output Converter Single input & Dual output Converter
PIN Details PIN Details
1 Vs 11 -Output2
2 +Input 12 NC
3 -Input 13 NC
4 +Output1 14 NC
5 -Output1 15 Phase
6 NC 16 NC
7 NC 17 Neutral
8 NC 18 NC
9 NC 19 Earth
10 +Output2 20-38 NC
PIN Details PIN Details
1 Vs 11 NC
2 +Input 12 NC
3 -Input 13 NC
4 NC 14 NC
5 NC 15 NC
6 Phase 16 NC
7 NC 17 NC
8 Neutral 18 NC
9 NC 19 - Output
10 Earth 20 +Output
About Us
CANOPUS INSTRUMENTS is engaged in the development & manufacturing of industrial automation and process control
instrumentation products. The product areas cover mainly Analog Signal Conditioning Instruments for Process Automation,
Embedded Systems & Ultrasonic Equipment for Non-Destructive Testing Applications.
All the CANOPUS range of products are designed and manufactured with special care, to ensure trouble free
performance in Industrial applications where Electromagnetic Interference (EMI) & Harsh environmental conditions exist.
Today these products come to our customers with the quality assurance and tech-support in H/W & S/W, which has
evolved with our experience of over 25 years, to ensure uninterrupted operation in field conditions. This has enabled us to
successfully create an installed base of tens of thousands units performing satisfactorily in a wide spectrum of Critical Real time
Industrial applications all over India and in other parts of the world.
INNOVATION – QUALITY- RELIABILITY
Isolation
(I)
Input
Type
Output
Type
Supply I/P Signal
Range
O/P Signal
Range
Isolation
No of O/P For
Dual
I I/P O/P Supply X X 3P XX
I R
V
I
90-270VAC
or
100-250VDC
FU
0-1K:1 0-5V:05
0-10V:10
4-20mA:42
0-20mA:20
3P
12I
0-5K:5
0-10K:10
Note: 12I extension implies Single Input & Dual Isolated output.