Buy top quality thermocouple converter in India. Canopus Instruments offers the best thermocouple transmitter in industry. Get in touch with us to know more about our products. https://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/thermocouple-signal-converter/

1. ISO 9001:2008
Certified
SIGNAL CONDITIONING &
ISOLATION
INPUT-THERMOCOUPLE
Features
 Input Thermocouple types :
J, K, B,E,R,S,T,N
 In-built Cold junction
compensation (CJC).
 0-10V/4-20mA output
calibration provided as per
user requirement of input
temp. range.
 Thermocouple non-linearity
not compensated
 24VDC Power Supply.
 Slim & compact design.
 Energy Efficient Module.
 Low Noise & Low drift for
long term stability
 2kV 3 Port Isolation.
SENSOR SIGNAL CONDITIONER
(THERMOCOUPLE TO VOLTAGE & CURRENT CONVERTER)
MODEL NO: I TCX 2D XXX-3P
Overview
SIM  2.0 Thermocouple (TC) input type modules can be interfaced to any of the commonly
available TC types; i.e. J,K,B,E,R,S,T,N to generate isolated 0-10V/4-20mA output. These
modules comprise of in-built Cold Junction Compensation (CJC) calibrated to track the TC
mV response at room temperature. The TC mV v/s V/I output is a linearly proportional
value. The module can be calibrated to I/P v/s O/P range according to the user
requirements.
The user has the option of implementing non-linearity error compensation of the TC
response in the Data Acquisition System interfaced to the Voltage/Current output of the
modules to achieve better accuracy in temperature measurements.
General Specifications
Isolation 2KV - 3 Port.
Power Supply Voltage 24VDC(nominal)
Operating Range 18 to 36 VDC
Ripple < 100mVpp
Power Supply Current 150mA.Max
Enclosure ABS Plastic, 35
mm DIN Rail Mounted.
IP40 Protection class.
Single Output W - 22.5mm
H - 75mm
D - 110mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0– 90%
RH Non-Condensing
Max. Altitude 3000 mts above MSL
Technical Specifications
Thermocouple
Input Signal
Input Options:
J Type(0 to +1200°C)* Factory Set
* Max. Temperature
Range
K Type(0 to +1370°C)*
E Type(0 to +1000°C)*
B Type(800 to +1820°C)*
R Type(0 to +1750°C)*
S Type(0 to +1750°C)*
T Type(0 to +400°C)*
N Type(0 to +1300°C)*
Input Resistance 100 K Ohm
Output Signal Output Options: 0- +5V, 0- +10V,
0-20mA, 4 20mA.
Factory Set
Load Resistance For Output Voltage >1 K Ohm
For Output Current 500 Ohm Max.
Performance
a. Electronic
System
Accuracy ±0.2% of Span at 25°C
Linearity 0.1%
Temperature Drift <0.01% / °C
Response Time < 1Sec
Calibration Zero & Span (Trimpot )
b. Thermocouple Non-linearity Compensation : Not provided
Applications
 Heating Control Systems
 Temperature monitoring
systems
 Data Acquisition Systems

2. Address: #2 & 3, ‘Vishwas’, Karnik Road, Off. Murbad Road, Kalyan (W) 421 301, Maharashtra, INDIA.
Tel: +91-251-2322576 / 2203389 Telfax: +91-251- 2325849.
Email: marketing@canopusinstruments.com Website: www.canopusinstruments.com
Ordering Information:
Mechanical Details:
Single Input & Single Output Converter
PIN Details PIN Details
1 +Input 5 +Output
2 -Input 6 -Output
3 NC 7 +24VDC
4 NC 8 GND
About Us
CANOPUS INSTRUMENTS is engaged in the development & manufacturing of industrial automation and process control
instrumentation products. The product areas cover mainly Analog Signal Conditioning Instruments for Process Automation,
Embedded Systems & Ultrasonic Equipment for Non-Destructive Testing Applications.
All the CANOPUS range of products are designed and manufactured with special care, to ensure trouble free performance
in Industrial applications where Electromagnetic Interference (EMI) & Harsh environmental conditions exist.
Today these products come to our customers with the quality assurance and tech-support in H/W & S/W, which has
evolved with our experience of over 25 years, to ensure uninterrupted operation in field conditions. This has enabled us to
successfully create an installed base of tens of thousands units performing satisfactorily in a wide spectrum of Critical Real time
Industrial applications all over India and in other parts of the world.
INNOVATION – QUALITY- RELIABILITY
Related Products
 Thermocouple Converters (Linearized Output)
 Programmable Input TC types J,K,B,E,R,S,T,N
 RTD to 0-10V/4-20mA Converters
 Programmable Indicators- Thermocouple Input,
 Re-transmission 4-20mA output, MODBUS interface
Isolation
(I)
Input
Type
Output
Type
Supply
24VDC
I/P Signal
Range
O/P Signal
Range
Isolation
I I/P O/P Supply XX X 3P
I
TC
V
I
2D
Type J :XJ
( 0 – +1200º C)* 0-5V:05
0-10V:10
4-20mA:42
0-20mA:20
3P
Type K :XK
( 0 – +1370º C)*
Type E :XE
(0 – +1000º C)*
Type B :XB
( 800 – +1820º C)*
Type R :XR
( 0 – +1750º C)*
Type S :XS
( 0 – +1750º C)*
Type T :XT
(0 - +400º C)*
Type N :XN
( 0 -+1300º C)*
*: Max. Measurement Range; X: Actual Range of TC