The document provides information on a pneumatic-electropneumatic training set. It includes descriptions of various modules and components that make up the training set, such as a control and monitoring panel with input, button, relay, timer, counter, motor and PLC modules. It also describes pneumatic equipment like cylinders, grippers, a pneumatic motor and directional control valves. The training set is designed to be modular for flexibility and components can be easily mounted and removed from the mounting panels.
The document provides information on the Prismaplus XT traffic sign system including:
1. It is available in sizes from 1-100 sqm and includes directional signs, speed limit signs, and parking guidance systems.
2. The frame uses aluminum channels for fastening and comes assembled for easy installation.
3. An optional LED lighting system called Keylight is available which uses CREE LEDs and has a low energy consumption.
Ls catalog thiet bi dien mcc solution 2000_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Ls catalog thiet bi dien mcc solution dienhathe.vnDien Ha The
The document provides information about SOLUTION 2000, an LV motor control center. It includes:
1) Technical specifications of the modular designed SOLUTION 2000 including construction details, ratings, dimensions and testing standards.
2) Descriptions of its main components including the main and vertical busbars, withdrawable units, and control and indication elements.
3) Application guidelines including standard unit sizes matched to motor capacities and voltage ratings.
The document is a user manual for the TE10A thyristor power controller. It can control loads of up to 20kW using burst-firing, single-cycle, or advanced single-cycle firing modes. The manual provides specifications for the controller including its current ratings, voltage range, firing indicators, control inputs, safety guidelines, and installation instructions.
New holland 1630 tractor service repair manualfujdfjjkskekme
This document is the contents page for a repair manual covering various tractor models. It lists 12 sections that provide information on different vehicle systems, including the engine, fuel, electrical, transmission and hydraulic systems, as well as steering, axles, wheels and separating the tractor. The document encourages downloading the full repair manual.
Go(p) no 27 2017-fin dated 26-02-2017 high mass light establish shanavas chithara
The document provides technical specifications for a mini mast light system. It specifies details like the height of the mast at 8 meters, material construction as per BS standards, base and top diameters, plate thickness, cross section, galvanization treatment, size of base opening and door. It also describes the foundation specifications, diameter and thickness of base plate, number and type of foundation bolts. Other details mentioned are head frame assembly, electrical control box components, LED luminaire specifications, number of luminaires, erection, testing and commissioning.
Ưu điểm của AC Servo Siemens Sinamics V90
HIỆU SUẤT TỐI ƯU
Tính năng Tuning một lần và cho phép tuning theo thời gian thực giúp tối ưu hóa hiệu suất của hệ thống.
Tần số xung ngõ vào cao lên đên 1MHz.
Encoder khác nhau giúp đáp ứng các yêu cầu ứng dụng khác nhau.
DỄ SỬ DỤNG
Kết nối đơn giản với hệ thống điều khiển
Điều chỉnh dể dàng và nhân bản thông số
Vận hành dễ dàng với SINAMICS V-ASSISTANT
Tích hợp dễ dàng qua PTI, PROFINET, USS, Modbus RTU
TIẾT KIỆM CHI PHÍ
Tích hợp: Pulse train positioning, internal positioning với traversing block hoặc Modbus
Tích hợp điện trở phanh trong tất cả các kích thước khung
Tích hợp holding brake switch (Frame size 400V)
HOẠT ĐỘNG TIN CẬY
Vòng bi motor chất lượng cao
Tiêu chuẩn cấp độ bảo vệ cho tất cả các loại motor IP65
Tích hợp tính năng bảo vệ Torque Off (STO)
This document summarizes an operator for sliding gates weighing up to 3,500 kg (7,716 lb). The By-3500T operator is powered by 230-400V AC and is reliable and powerful for large sliding gates. It has safety and control features like self-diagnosing safety devices and can be used for industrial facilities with heavy sliding gates.
The document provides information on the Prismaplus XT traffic sign system including:
1. It is available in sizes from 1-100 sqm and includes directional signs, speed limit signs, and parking guidance systems.
2. The frame uses aluminum channels for fastening and comes assembled for easy installation.
3. An optional LED lighting system called Keylight is available which uses CREE LEDs and has a low energy consumption.
Ls catalog thiet bi dien mcc solution 2000_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Ls catalog thiet bi dien mcc solution dienhathe.vnDien Ha The
The document provides information about SOLUTION 2000, an LV motor control center. It includes:
1) Technical specifications of the modular designed SOLUTION 2000 including construction details, ratings, dimensions and testing standards.
2) Descriptions of its main components including the main and vertical busbars, withdrawable units, and control and indication elements.
3) Application guidelines including standard unit sizes matched to motor capacities and voltage ratings.
The document is a user manual for the TE10A thyristor power controller. It can control loads of up to 20kW using burst-firing, single-cycle, or advanced single-cycle firing modes. The manual provides specifications for the controller including its current ratings, voltage range, firing indicators, control inputs, safety guidelines, and installation instructions.
New holland 1630 tractor service repair manualfujdfjjkskekme
This document is the contents page for a repair manual covering various tractor models. It lists 12 sections that provide information on different vehicle systems, including the engine, fuel, electrical, transmission and hydraulic systems, as well as steering, axles, wheels and separating the tractor. The document encourages downloading the full repair manual.
Go(p) no 27 2017-fin dated 26-02-2017 high mass light establish shanavas chithara
The document provides technical specifications for a mini mast light system. It specifies details like the height of the mast at 8 meters, material construction as per BS standards, base and top diameters, plate thickness, cross section, galvanization treatment, size of base opening and door. It also describes the foundation specifications, diameter and thickness of base plate, number and type of foundation bolts. Other details mentioned are head frame assembly, electrical control box components, LED luminaire specifications, number of luminaires, erection, testing and commissioning.
Ưu điểm của AC Servo Siemens Sinamics V90
HIỆU SUẤT TỐI ƯU
Tính năng Tuning một lần và cho phép tuning theo thời gian thực giúp tối ưu hóa hiệu suất của hệ thống.
Tần số xung ngõ vào cao lên đên 1MHz.
Encoder khác nhau giúp đáp ứng các yêu cầu ứng dụng khác nhau.
DỄ SỬ DỤNG
Kết nối đơn giản với hệ thống điều khiển
Điều chỉnh dể dàng và nhân bản thông số
Vận hành dễ dàng với SINAMICS V-ASSISTANT
Tích hợp dễ dàng qua PTI, PROFINET, USS, Modbus RTU
TIẾT KIỆM CHI PHÍ
Tích hợp: Pulse train positioning, internal positioning với traversing block hoặc Modbus
Tích hợp điện trở phanh trong tất cả các kích thước khung
Tích hợp holding brake switch (Frame size 400V)
HOẠT ĐỘNG TIN CẬY
Vòng bi motor chất lượng cao
Tiêu chuẩn cấp độ bảo vệ cho tất cả các loại motor IP65
Tích hợp tính năng bảo vệ Torque Off (STO)
This document summarizes an operator for sliding gates weighing up to 3,500 kg (7,716 lb). The By-3500T operator is powered by 230-400V AC and is reliable and powerful for large sliding gates. It has safety and control features like self-diagnosing safety devices and can be used for industrial facilities with heavy sliding gates.
This document provides an overview of the SIMATIC S7-1500 programmable logic controller (PLC) system and its components. It describes the S7-1500 PLCs and their scalable performance capabilities. It also lists the various software, modules, and accessories that comprise the S7-1500 system for automation applications.
This document provides information on boom barriers from ASN Services Pvt. Ltd. It lists various features of the boom barriers including manual release, a machine core with compression spring to avoid accidents from spring breaking, a die-casting alloy motor for precision and heat dissipation, a motor cooling fan, double safety limit switches including photoelectric and motor memory sensors, reversing on obstacles, auto-closing, optional infrared photocells for anti-bumping and external/internal vehicle loop detectors, and optional traffic light interface, wire control or remote control. It also provides technical specifications for various boom barrier models including running time, boom type, length, dimensions, weight, voltage and power requirements.
The document discusses parking barriers made by ELKA Barriers including:
1) The barriers use aluminum housings, powerful 24V motors, and robust mechanics designed for intensive use.
2) The controller provides precise movement of the barrier boom through electronic rotation speed control and allows for automatic opening in a power failure.
3) The controller and boom connector can be used for both left and right installations and rectangular or round booms.
Ls catalog thiet bi dien ul mccb dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document provides information on the Series C-LUX 6108 and 6508 compact emergency lighting fittings. It includes details on their operating modes, electrical and mechanical specifications, emergency lighting electronics, battery specifications, accessories, spare parts, and dimensional drawings. The fittings can be used for safety illumination or as information/emergency exit sign lights and include features like self-testing, deep discharge protection, and LED indicators for status. The 6108 model is for use in hazardous zones while the 6508 is for non-hazardous zones. Various emergency exit signs and accessories are also described.
This document provides installation and maintenance instructions for low voltage alternators. It begins with safety instructions and then provides details on:
1. Receiving the alternator and checking for damage or incorrect specifications
2. The alternator's technical specifications including electrical characteristics, mechanical characteristics, and optional features.
3. Installation including assembly, connection diagrams, commissioning, and setting up the alternator.
4. Servicing and maintenance including safety measures, routine maintenance, addressing mechanical and electrical faults, and dismantling/reassembly.
5. Spare parts including a list of first maintenance parts and instructions for obtaining technical support.
This document introduces Vinayaka Controls and Instrumentation, an electrical panel manufacturing company based in Bangalore, India. It provides details about the company's certifications, products and services. The company designs and manufactures all types of electrical panels, including power distribution panels, PLC control panels, motor control centers, instrumentation panels and more. It also offers turnkey electrification projects, civil works, liaison services and more. The document provides an overview of the company and specifications for the control panels it manufactures.
The document provides information on the Compact Light Fitting Series C-LUX 6100/6500. It includes details on the suitable mounting locations, central locking mechanism, emergency exit sign options, explosion protection certifications, technical specifications, and accessories. Selection tables show the available lamp, ballast, and order number configurations. Dimensions and installation notes are also provided.
The document provides information on the 130 and 140 series positioning tables from Lintech, including:
- The 130 series offers precision performance for a wide range of motion control applications and includes options like various screw types, encoder mounts, and safety switches.
- Features of the 130 series include a low friction linear ball bearing system, precision machined aluminum construction, and a variety of screw and motor options.
- The document provides detailed specifications, dimensions, load capacities, and an ordering guide for selecting the proper 130 series table configuration.
The document provides a description of the ZXDU68 T601 power supply system. The system can support up to 12 rectifier modules to provide a maximum output of 600A. It has features such as high efficiency rectifiers, flexible system configuration, intelligent monitoring and management functions. The system specifications include technical details on the AC and DC power distribution, alarm management, control functions and environmental tolerances.
1. The document provides specifications for the RCA ROBO Cylinder, including its dimensions, load capacity, speed capabilities at different strokes, and compatible controllers.
2. It describes the actuator specifications such as lead, thrust, model, stroke, and maximum speed. It also lists the encoder and stroke options.
3. Various controller options are presented that can operate the RCA series actuators, including models suitable for solenoid valves, positioning, pulse train input, serial communication, and program control. Compatible controllers differ in their maximum positioning points and input voltage.
The ZXDU68 W201 is a high frequency, switch-mode outdoor DC power system designed by ZTE for applications such as outdoor GSM/CDMA mobile stations. It has a maximum capacity of 200A with four hot-swappable 50A rectifier modules. The system provides high reliability, efficiency, electromagnetic compatibility, and easy maintenance while complying with international safety and EMC standards. Key features include LVD protection, remote monitoring and control, surge protection, and an IP55-rated enclosure suitable for outdoor use.
Toyota bt lep340 be electric pallet truck service repair manualudjjjskekdmdm
The document provides repair and maintenance instructions for drive units and final gears on several models of Linde forklift trucks. It includes overview diagrams and descriptions of drive unit components, instructions for checking for leaks and noise, replacing the drive gear or wheel hub seal, and changing the drive gear oil. Procedures are accompanied by warnings and pictograms. The document also provides technical specifications and part numbers for drive unit components.
Catalog thiết bị đóng cắt Fuji Electric - 09 - Measuring Instuments
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
This document summarizes a new tabletop robot model called the TTA Series. It has significantly higher payload and maximum speed compared to conventional models. It can store more programs and positions in its larger memory. It has three times as many input/output points. It is available in four operating ranges with optional variations for the Z-axis stroke and Y-axis position and height. Its integrated structure provides greater bending rigidity.
Mitsubishi fb20 cn forklift trucks service repair manual snefb17 20011-upfjskekdmmse
This document provides a summary of the service manual sections for vehicle electrical components, power train, transfer unit, rear axle, brake system, steering system, hydraulic system, and mast and forks for several forklift truck models. The vehicle electrical components section describes the console box and components within it such as the central vehicle monitor system, direction lever, key switch, lighting switch, and fuses. It provides disassembly and reassembly instructions for the console box.
The document provides specifications for several models of linear actuators and guide modules. The FS-L series focuses on high speed and high payload types with strokes up to 3000mm. Timing belt drive provides quiet motion. Gantry-type systems are possible using guide modules. Models include the FS-LM belt-driven single-axis robot, FS belt-driven slim robot, and FS-LO guide module only systems. Payloads, speeds, dimensions and other specifications vary by model and stroke length.
The document discusses various types of pneumatic circuits used to control single and double acting cylinders. It provides examples of circuits that use push buttons or roller levers to start and stop the operation of clamping cylinders for applications like clamping a workpiece or drilling machine. The examples demonstrate how to identify the type of cylinder, suitable control valve, and methods for starting and stopping the cylinder movement based on the specific application.
Industrial Fluid power ppt for Ifp ch. no. 5 pneumatic circuits, By Prof. Kokare A.Y.
Lecturer at Babasaheb phadtare polytechnic, Kalamb-Walchandnagar.
This document provides an overview of pneumatic control and automation concepts including:
- Standard symbols for pneumatic components like cylinders, valves, and other devices based on ISO 1219 standards.
- Examples of using 2/2 and 3/2 valves to control single-acting cylinders, and 5/2 valves to control double-acting cylinders. Speed control methods like flow regulators are discussed.
- Sequential control concepts and examples of circuits using multiple cylinders operated in sequence are presented.
This document discusses pneumatic control circuits and their components such as compressors, valves, pistons, and filters. It provides exercises to design circuits where pressing start moves a piston to position LS2, then reversing to LS1 when stop is pressed. Another exercise has the piston moving to LS2 on start, waiting a time T, then reversing to LS1 and repeating until stop. A final exercise has two pistons alternating movements to positions LS2 and back to LS1 when the start button is pressed until the stop button is pressed.
This document provides an overview of the SIMATIC S7-1500 programmable logic controller (PLC) system and its components. It describes the S7-1500 PLCs and their scalable performance capabilities. It also lists the various software, modules, and accessories that comprise the S7-1500 system for automation applications.
This document provides information on boom barriers from ASN Services Pvt. Ltd. It lists various features of the boom barriers including manual release, a machine core with compression spring to avoid accidents from spring breaking, a die-casting alloy motor for precision and heat dissipation, a motor cooling fan, double safety limit switches including photoelectric and motor memory sensors, reversing on obstacles, auto-closing, optional infrared photocells for anti-bumping and external/internal vehicle loop detectors, and optional traffic light interface, wire control or remote control. It also provides technical specifications for various boom barrier models including running time, boom type, length, dimensions, weight, voltage and power requirements.
The document discusses parking barriers made by ELKA Barriers including:
1) The barriers use aluminum housings, powerful 24V motors, and robust mechanics designed for intensive use.
2) The controller provides precise movement of the barrier boom through electronic rotation speed control and allows for automatic opening in a power failure.
3) The controller and boom connector can be used for both left and right installations and rectangular or round booms.
Ls catalog thiet bi dien ul mccb dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document provides information on the Series C-LUX 6108 and 6508 compact emergency lighting fittings. It includes details on their operating modes, electrical and mechanical specifications, emergency lighting electronics, battery specifications, accessories, spare parts, and dimensional drawings. The fittings can be used for safety illumination or as information/emergency exit sign lights and include features like self-testing, deep discharge protection, and LED indicators for status. The 6108 model is for use in hazardous zones while the 6508 is for non-hazardous zones. Various emergency exit signs and accessories are also described.
This document provides installation and maintenance instructions for low voltage alternators. It begins with safety instructions and then provides details on:
1. Receiving the alternator and checking for damage or incorrect specifications
2. The alternator's technical specifications including electrical characteristics, mechanical characteristics, and optional features.
3. Installation including assembly, connection diagrams, commissioning, and setting up the alternator.
4. Servicing and maintenance including safety measures, routine maintenance, addressing mechanical and electrical faults, and dismantling/reassembly.
5. Spare parts including a list of first maintenance parts and instructions for obtaining technical support.
This document introduces Vinayaka Controls and Instrumentation, an electrical panel manufacturing company based in Bangalore, India. It provides details about the company's certifications, products and services. The company designs and manufactures all types of electrical panels, including power distribution panels, PLC control panels, motor control centers, instrumentation panels and more. It also offers turnkey electrification projects, civil works, liaison services and more. The document provides an overview of the company and specifications for the control panels it manufactures.
The document provides information on the Compact Light Fitting Series C-LUX 6100/6500. It includes details on the suitable mounting locations, central locking mechanism, emergency exit sign options, explosion protection certifications, technical specifications, and accessories. Selection tables show the available lamp, ballast, and order number configurations. Dimensions and installation notes are also provided.
The document provides information on the 130 and 140 series positioning tables from Lintech, including:
- The 130 series offers precision performance for a wide range of motion control applications and includes options like various screw types, encoder mounts, and safety switches.
- Features of the 130 series include a low friction linear ball bearing system, precision machined aluminum construction, and a variety of screw and motor options.
- The document provides detailed specifications, dimensions, load capacities, and an ordering guide for selecting the proper 130 series table configuration.
The document provides a description of the ZXDU68 T601 power supply system. The system can support up to 12 rectifier modules to provide a maximum output of 600A. It has features such as high efficiency rectifiers, flexible system configuration, intelligent monitoring and management functions. The system specifications include technical details on the AC and DC power distribution, alarm management, control functions and environmental tolerances.
1. The document provides specifications for the RCA ROBO Cylinder, including its dimensions, load capacity, speed capabilities at different strokes, and compatible controllers.
2. It describes the actuator specifications such as lead, thrust, model, stroke, and maximum speed. It also lists the encoder and stroke options.
3. Various controller options are presented that can operate the RCA series actuators, including models suitable for solenoid valves, positioning, pulse train input, serial communication, and program control. Compatible controllers differ in their maximum positioning points and input voltage.
The ZXDU68 W201 is a high frequency, switch-mode outdoor DC power system designed by ZTE for applications such as outdoor GSM/CDMA mobile stations. It has a maximum capacity of 200A with four hot-swappable 50A rectifier modules. The system provides high reliability, efficiency, electromagnetic compatibility, and easy maintenance while complying with international safety and EMC standards. Key features include LVD protection, remote monitoring and control, surge protection, and an IP55-rated enclosure suitable for outdoor use.
Toyota bt lep340 be electric pallet truck service repair manualudjjjskekdmdm
The document provides repair and maintenance instructions for drive units and final gears on several models of Linde forklift trucks. It includes overview diagrams and descriptions of drive unit components, instructions for checking for leaks and noise, replacing the drive gear or wheel hub seal, and changing the drive gear oil. Procedures are accompanied by warnings and pictograms. The document also provides technical specifications and part numbers for drive unit components.
Catalog thiết bị đóng cắt Fuji Electric - 09 - Measuring Instuments
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
This document summarizes a new tabletop robot model called the TTA Series. It has significantly higher payload and maximum speed compared to conventional models. It can store more programs and positions in its larger memory. It has three times as many input/output points. It is available in four operating ranges with optional variations for the Z-axis stroke and Y-axis position and height. Its integrated structure provides greater bending rigidity.
Mitsubishi fb20 cn forklift trucks service repair manual snefb17 20011-upfjskekdmmse
This document provides a summary of the service manual sections for vehicle electrical components, power train, transfer unit, rear axle, brake system, steering system, hydraulic system, and mast and forks for several forklift truck models. The vehicle electrical components section describes the console box and components within it such as the central vehicle monitor system, direction lever, key switch, lighting switch, and fuses. It provides disassembly and reassembly instructions for the console box.
The document provides specifications for several models of linear actuators and guide modules. The FS-L series focuses on high speed and high payload types with strokes up to 3000mm. Timing belt drive provides quiet motion. Gantry-type systems are possible using guide modules. Models include the FS-LM belt-driven single-axis robot, FS belt-driven slim robot, and FS-LO guide module only systems. Payloads, speeds, dimensions and other specifications vary by model and stroke length.
The document discusses various types of pneumatic circuits used to control single and double acting cylinders. It provides examples of circuits that use push buttons or roller levers to start and stop the operation of clamping cylinders for applications like clamping a workpiece or drilling machine. The examples demonstrate how to identify the type of cylinder, suitable control valve, and methods for starting and stopping the cylinder movement based on the specific application.
Industrial Fluid power ppt for Ifp ch. no. 5 pneumatic circuits, By Prof. Kokare A.Y.
Lecturer at Babasaheb phadtare polytechnic, Kalamb-Walchandnagar.
This document provides an overview of pneumatic control and automation concepts including:
- Standard symbols for pneumatic components like cylinders, valves, and other devices based on ISO 1219 standards.
- Examples of using 2/2 and 3/2 valves to control single-acting cylinders, and 5/2 valves to control double-acting cylinders. Speed control methods like flow regulators are discussed.
- Sequential control concepts and examples of circuits using multiple cylinders operated in sequence are presented.
This document discusses pneumatic control circuits and their components such as compressors, valves, pistons, and filters. It provides exercises to design circuits where pressing start moves a piston to position LS2, then reversing to LS1 when stop is pressed. Another exercise has the piston moving to LS2 on start, waiting a time T, then reversing to LS1 and repeating until stop. A final exercise has two pistons alternating movements to positions LS2 and back to LS1 when the start button is pressed until the stop button is pressed.
The document discusses basic pneumatic circuitry and components for control and automation. It covers pneumatic symbols, circuit layout principles, and examples of actuator control using 2/2, 3/2, and 5/2 valves. The 2/2 valve uses two valves to admit air to move the actuator in one direction and exhaust air to move it in the other. The 3/2 valve provides inlet and exhaust with one valve. The 5/2 valve simultaneously switches the supply and exhaust paths to control a double-acting actuator.
Hydraulic Electro Hydraulic Training SetFaruk Kartal
Hydraulic and electrohydraulic training set using for hydraulic training. It contains 12 different unit that replaceable in below.
1. Training panel
2. Drawer unit
3. Input module
4. Buttons and signal lamps module
5. Relays module
6. Time relay module
7. Counter module
8. Motor module (DC motor, stepping motor, encoder)
9. PLC module (SIEMENS S7 1200)
10. Proportional directional control valve module
11. Proportional pressure control valve module
Ls catalog thiet bi dien mcc solution 2000Dien Ha The
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
The document provides information about SOLUTION 2000, an LV motor control center. It includes:
1) Technical specifications of the modular designed SOLUTION 2000 including type testing, voltage rating, short circuit withstand rating, dimensions, and degree of protection.
2) Details on the main and vertical busbars, units, and control components.
3) Application guidelines including standard unit sizes for different motor capacities.
4) Contact information for LS Industrial Systems offices worldwide that provide services for the SOLUTION 2000.
This document provides information on direct-on-line starters protected by manual motor starters for controlling three-phase asynchronous motors up to 15 kW. It includes details on coordination types, main technical data, and kit configurations for open-type starters using contactors and manual motor starters. Reversing starters and star-delta starters protected by overload relays are also summarized.
The document is a user guide for the MD310 AC drive from Shenzhen Inovance Technology Co., Ltd. It provides information on product specifications, wiring, setup, troubleshooting, and parameters. The guide covers safety precautions, nameplate details, terminal descriptions, typical wiring diagrams, easy setup instructions, fault solutions, and tables of general and monitoring parameters.
1. The document provides information on automatic swing gate solutions from a German company, including a wide range of electric gate motors, actuators, and accessories for residential and commercial swing gates.
2. It includes specifications for various gate motor models for swing gates up to 5 meters, including pneumatic, hydraulic, and electromechanical options that can operate on 24V or 230V power supplies.
3. The company offers on-site installation support across Europe and India, and products are made in Germany and Europe with advanced technology and quality materials like aluminum, stainless steel, and polymers.
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Catalog ls metasol mc_e_1008_denhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Catalog ls metasol mc e_1004_denhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document provides a product guide for ABB's UVT92m static monitoring relay, which continuously monitors fuses for blowing out or removal. The relay can detect failures on one, two, or three phases. It has a plug-in socket design for easy installation and maintenance. Technical specifications include operating temperature range, auxiliary power supply requirements, contact ratings, and environmental testing certifications. Dimensions and mounting instructions are also included, along with ordering information.
The Avtron Model HS45 is a heavy duty incremental encoder that can be used for both control and instrumentation applications. It has a two-phase output with complements and a marker pulse. Its electronics are fully potted to protect against liquids. An adaptive electronics feature and fault-check output allow it to self-monitor and provide early warning of potential issues. It is designed for rugged industrial environments but is not suitable for hazardous locations.
The Avtron Model HS45 encoder:
- Eliminates the need for shaft couplings by utilizing a high clamping-force collar to securely mount to machine shafts, even under vibration and shock.
- Uses magnetoresistive sensors, providing immunity to contaminants that can cause optical encoders to fail. All electronics are fully potted.
- Has a diagnostic package that monitors encoder health and provides advance warning of potential failures via a Fault-Check output and LED.
- Is available in hollow shaft models to fit shaft sizes from 5/8" to 1 1/8" and can encode speeds up to 5000 RPM in harsh industrial environments.
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD310 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Catalog ls susol ul_mccb_e_1104_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The TCS relay continuously supervises circuit breaker trip circuits to detect faults. It monitors the low-level current injected into the circuit and alarms if supply is lost, the trip coil fails, or current stops flowing. The relay has a green LED under normal conditions and a red LED with 0.6 second delayed operation if a fault is detected. It is designed for easy flush mounting and has adjustable settings to accommodate different voltage supplies.
BSUMWELL motor soft starter and frequency inverter,voltage can be 220VAC,380VAC,440VAC,660VAC,1140VAC,Power from 0.4kw to 800kw.widely use for Fan,pump,face mask machine,Compressor,pulp machine,cargo pump,fire pump,Crusher,Turbo blower and so on.
Support OEM,OEM,Samples order.
This document provides information on Fuji Electric's magnetic contactors and starters, including the SC and SW series. It describes the key features and advantages of these products, such as their modular design that allows for easy addition of functions, long electrical life, wide voltage ratings, and bifurcated auxiliary contacts. The SC-N series is highlighted for using an electronically-controlled SUPER MAGNET coil that provides positive pick-up and drop-out without chattering across a wide voltage range on both AC and DC power supplies. Safety features like terminal covers and insulation barriers are also summarized.
A-OK Innovations is previewing new smart home products including tubular motors, venetian motors, chain motors, and control systems. The tubular motors come in various sizes and features like Bluetooth, Zigbee, and lithium battery options. The venetian motor precisely controls venetian blinds. Chain motors include models for windows up to 400Nm torque. Control systems allow remote and timer operation of motors from smart devices using protocols like HomeKit, Google Home, Alexa, and others. The document provides details on specifications and features of the new smart home product line.
Similar to Pneumatic & Electropneumatic Training Set (20)
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
2. MDL-ADO 001
TRAINING PANEL WITH DRAWER
1210 mm (L), 800 mm (W), 1850 mm (H)
The main column sizes 90x90 mm
Moduler type anodized aluminum
Shock resistant laminate table
Lockable wheels
Portable and fixed
Can be used one side or double side
Equipment cabinet with drawer that produced sheet metal
Can be replaced 3 pcs drawer
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
3. MDL-ADO 004 CONTROL AND MONITORING PANEL
All electrical elements are placed on a board made of aluminum with thickness 4-5
mm for get more space and easy of use. Thus, more element to be used in narrow
areas.
Command elements done as modular type and divided form. The benefit of this;
elements in case of malfunction or damage; the present system can be modified
Control panel can be removed in a few seconds for the mounted on the table as a
channel. Closed and sealed on all sides to prevent ingress of dust. 4 mm measure
born socket are used on the panel; so all electrical connections are made easily by
banana cable.
Each relay has 3 contact that can be used as normally open or normally closed.
When the relay coil is powered it can be seen by signal lamps with metal body. 6
pieces of 3 different colored signal lamp are on the panel for to use various purposes
Control and monutoring panel made from 7 different unit that replaceable
1. Input module
2. Buttons and signal lamps module
3. Relays module
4. Time relay module
5. Counter module
6. Motor module (DC motor, stepping motor, encoder)
7. PLC module (SIEMENS S7 1200)
1. INPUT MODULE: It contains 220 VAC input 24VDC output
power supply, emergency stop button, on-off button with
indicator lamp, female energy cable with fuse, +24V and - 0V
output sockets.
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
4. 2. BUTTONS AND SIGNAL LAMPS MODULE: 4 PCS
buttons (3 pcs variable, 1 pcs permanenetly) Each button
have 2 pcs contact can be used as normally open or
normally closed. All buttons with signal lamp that 2 color as
green and yellow. Lamp sockets are on the right of module.
3. RELAY MODULE: Each relay has 3 contact that can be used as
normally open or normally closed. When the relay coil is powered it
can be seen by signal lamps that metal body, 8 mm diameter, IP
65.
4. DIGITAL TIME RELAY MODULE: It has be 24V DC properties w i t h d i g i t a l
screen. 48x48 mm sizes, 2x4 counts. Can be set easily by push buttons that
replaced on the front screen. Protection class IP60 front panel, IP20 back panel.
Sensing mode selectable like PNP, NPN. 9 stage (0-99.99 second, 0-9999 hour).
Memory or memoryless.
5. DIGITAL COUNTER MODULE: Digital screen, 48x48 mm sizes. 2x4 count. It
have 2 output socket for counting process. Counting frequence 25- 9999 Hz (max.
9999Hz, 5V- 30V pulse). You can use NO and NC relay at the output. Front panel IP
65 class. Back panel IP20 class. Adjustment and programming process easily mini
push button that replaced front panel. Sensing mode selectable; like PNP, NPN,
encoder etc.
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
5. 6. DC MOTOR, STEPPING MOTOR, OPTICAL ENCODER MODULE:
a. DC Motor: With normally torque can be many application. About 100 RPM.
Mounted panel by 3 screws it can be demounted. Very stable. Can be operated 2 pcs
socket by easily. Triger gear attached at the motor sipindle. Triger belt used with DC
motor and encoder or stepping motor and encoder.
b. Stepping Motor and Driver: Hybrid type stepping motor. Nema 17, 4,8 kg.cm,
1,8 degree, 2,5A, 48 mm, 2 phase. Insulation resistance; 100MΩ min 50VDC.
o
Dielectric strength; 500VAC 1minute. Temperature rise 80 C.
c. Optical Encoder: Can be used with motor module that described on the below.
Incremental 100 pulse/turn, 50 mm case diameter, aluminum and steel case
material. 5-30VDC supply voltage. Spindle diameter that 6,8 mm made from
stainless steel. Output type TP (push-pull), TTL (line driver), HTL (line driver).
Possible to 4000 RPM. Supply voltage 5-24V and IP 50 protection class. It have 6
cable.
7. PLC MODULE: SIEMENS Simatic S7 1200, CPU 1212C PLC. 8 pcs input simulator.
8 pcs toggle momentary. 8 pcs signal lamp with metal body, IP 65, 8 mm diameter.
Selectable fast output or normally output.
Inputs can be signaled with toggle switch; not needed
another device. You can be controlled to the signal is
okey or not okey .
This model PLC has 2 analog input signal. Analog signal
measurable by digital voltmeter or adjustable. Existing
relay of PLC, not suitable driving of steping motor or
servo motor. Because electrical switch is attached to the
set for application TPO, PWM
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
6. MDL-ADO 002 ALUMİNUM MOUNTING PANEL
1060x780 mm sizes
Moduler type; easy, mounting and demounting
It is used one side or double side
No oxidation, shock resistant anodized aluminum
T slots for mounting equipments
Solid body to prevent vibrations
All edges are rounded for safety work Its not sharp
Used in special caps to hide the connection bolts
Either independently mounted on the table can be used
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
7. Adjustable
Pressure
FEATURES
Control panel
SILENT COMPRESSOR
MDL-ADO 005
Button and signal lamps
stainless, nickel coated
Its have IP68 class
Front and rear vents
Easy moving
and transport
24 Liter pressured air tank. Manometers for tank pressure and output pressure. Adjustable and
monitoring pressure value. Shock resistant. Safety valve, Electrical pressure switch. Electrical motor
driven by contactor. 40 Decibel noise level. Drain cock. Protection class IP 68
buttons and signal lamps. Front and rear vents for prevent overheating. 1,5 meter energy cable. 4-6
mm diameter and two piece hose outlet.
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
8. TECHNICAL SPECIFICATION
Nominal voltage 230V / 50 Hz
Dimensions (WxDxH) Ap. 350x700x680 mm
Weight Ap. 40 kg.
Air capacity-FAD (free air delivery) 64 lt/min
Noise level 40 dB
Filtration degree --------
Filter condensate system ---------
Filter element --------
Tank capacity 24 lt.
Tank condensate system Manuel
Operating pressure
Max. operating pressure
Up to 8 bar
Up to 10 bar
Outlet hose diameter ø 4-6 mm
DATA
Protection class of button and signal lamp IP 65
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
9. 20x50 mm, magnetic, with cam attached.
Easily mounting and demounting to the
aluminum panel by thread.
Single acting cylinder
20x100 mm, magnetic, with cam attached.
Easily mounting and demounting to the
aluminum panel by thread.
Double acting cylinder
16x100 mm, magnetic, rodless cylinder.
Easily mounting and demounting to the
aluminum panel by thread.
Rodless cylinder
12x50 mm, double acting, magnetic. Easily
mounting and demounting to the aluminum
panel by thread.
Short stroke cylinder
16x50 mm, double acting, magnetic, non
rotating. Easily mounting and demounting to
the aluminum panel by thread.
Sliding cylinder
40x100 mm, double acting, hydraulic tank. In-out
regulation+skip or stop valve. Easily mounting
and demounting to the aluminum panel by
thread.
Hydraupneumatic cylinder
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ACTUATORS
MDL-ADO013
MDL-ADO014
MDL-ADO017
MDL-ADO016
MDL-ADO018
MDL-ADO019
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO017
Made in Italy
M
MDL-ADO016
Made in Italy
M
MDL-ADO018
Made in Italy
M
MDL-ADO019
Made in Italy
M
MDL-ADO013
Made in Italy
M
MDL-ADO014
Made in Italy
10. o
Rotary angle 0-180 , 0,39-2,9 Nm, magnetic.
Easily mounting and demounting to the
aluminum panel by thread.
Rotary cylinder
16-20-32 mm (optional), clamping force 15-70
Nm, angular fingers.
Gripper
Gun type, aluminum injected body. Unloaded
RPM 2200, 300W power, 1,23 kg weight,
tighteened 1-10 mm drill bit.
Pneumatic motor
MDL-ADO021
MDL-ADO022
MDL-ADO020
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ACTUATORS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO021
Made in Italy
M
MDL-ADO022
Made in Italy
M
MDL-ADO020
Made in Taiwan
11. 24VDC, 2/2 position. Normally closed.
Anodized aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
2/2 DCV with single solenoid
24VDC, 2/2 position. Anodized aluminum base.
Easily mounting and demounting to the
aluminum panel by hand.
2/2 DCV with double solenoid
2/2 position. Usable normally closed or
normally open. Anodized aluminum base.
Easily mounting and demounting to the
aluminum panel by hand.
2/2 DCV with push button
2/2 position. Usable normally closed. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
2/2 DCV with single pilot
2/2 position. Usable normally normally open.
Anodized aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
2/2 DCV with single pilot
2/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
2/2 DCV with double pilot
DIRECTIONAL CONTROL VALVES (DCV)
MDL ADO169
MDL-ADO023NK
MDL-ADO023NA
MDL-ADO024
MDL-ADO084
MDL-ADO170
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDLADO169
Made in Italy
M
MDL-ADO023NK
Made in Italy
M
MDL-ADO023NA
Made in Italy
1
2
1
2
1
2
1
2
M
MDL-ADO024
Made in Italy
1
2
10
12
12 10
M
MDL-ADO084
Made in Italy
1
2
M
MDL-ADO170
Made in Italy
1
2
12. 3/2 position with spring return. Normally
closed. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
3/2 position. Normally open. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 Emergency stop with mushroom button
3/2 position. Normally closed. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with push button
3/2 position. Normally open. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with push button
3/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
3/2 DCV with lever button
3/2 DCV spring return with manual lever
3/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
3/2 DCV with manual lever
MDL-ADO047
MDL-ADO045
MDL-ADO046
MDL-ADO048
MDL-ADO050
MDL- AD0171
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
DIRECTIONAL CONTROL VALVES (DCV)
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO045
Made in Italy
31
2
M
MDL-ADO047
Made in Italy
31
2
M
MDL-ADO046
Made in Italy
31
2
M
MDL-ADO048
Made in Italy
31
2
M
MDL-ADO050
Made in Italy
31
2
M
MDL-AD0171
Made in Italy
31
2
13. 3/2 position. Normally closed. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with roller lever
3/2 position. Normally closed. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with single pilot
3/2 position. Normally closed. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with single pilot
3/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
3/2 DCV with double pilot
3/2 position. Normally closed. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with one way roller lever
24VDC, 3/2 position. Normally closed.
Anodized aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
3/2 DCV with single solenoid
MDL-ADO079
MDL-ADO172
MDL-ADO173
MDL-ADO077
MDL-ADO078
MDL-ADO110
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
DIRECTIONAL CONTROL VALVES (DCV)
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO079
Made in Italy
31
2
12
M
MDL-ADO172
Made in Italy
31
2
M
MDL-ADO077
Made in Italy
31
2
12 10
M
MDL-ADO077
Made in Italy
31
2
10
M
MDL-ADO078
Made in Italy
31
2
M
MDL-ADO110
Made in Italy
31
2
14. 5/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
5/2 DCV with double pilot
5/3 position. Closed center. Anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
5/3 DCV with double pilot
5/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
5/2 DCV with push button
5/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
5/2 DCV with roller lever
5/2 DCV with single pilot
5/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
24 DCV, 3/2 position. Anodized aluminum base.
Easily mounting and demounting to the
aluminum panel by hand.
3/2 DCV with double solenoidMDL-ADO174
MDL-ADO051
MDL-ADO052
MDL-ADO080
MDL-ADO081
MDL-ADO083
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
DIRECTIONAL CONTROL VALVES (DCV)
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO051
Made in Italy
3
1
4
M
MDL-ADO052
Made in Italy
5
2
3
4
5
2
M
MDL-ADO080
Made in Italy
3
4
5
2
14
1
1
M
MDL-ADO081
Made in Italy
3
4
5
2
14
1
12
M
MDL-ADO083
Made in Italy
14 12
3
4
5
2
1
M
MDL-ADO174
Made in Italy
31
2
15. 5/3 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
5/3 DCV with push-pull button
5/2 position, 24VDC. Anodized aluminum base.
Easily mounting and demounting to the
aluminum panel by hand.
5/2 DCV with single solenoid
5/2 position. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
5/2 DCV spring return with manual lever
5/3 position. Closed center. Anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
5/3 DCV with manual lever
5/3 position. Closed center. Anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
5/3 DCV with lockable manual lever
5/3 position. Open center. Anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
5/3 DCV with double pilotMDL-ADO082
MDL-ADO053
MDL-ADO076
MDL-ADO175
MDL-ADO176
MDL-ADO111
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
DIRECTIONAL CONTROL VALVES (DCV)
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO082
Made in Italy
14 12
3
4
5
2
1
M
MDL-ADO053
Made in Italy
3
1
4
5
2
M
MDL-ADO076
Made in Italy
3
4
5
2
1
3
4
5
2
1
M
MDL-ADO175
Made in Italy
3
4
5
2
1
M
MDL-ADO176
Made in Italy
M
MDL-ADO111
Made in Italy
3
4
5
2
1
16. 5/2 position, 24VDC. Anodized aluminum base.
Easily mounting and demounting to the
aluminum panel by hand.
5/2 DCV with double solenoid
5/3 position. Closed center. Anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
5/3 DCV with double solenoid
5/3 position, open center, anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
5/3 DCV with double solenoid
1 pcs 5/2 single solenoid, 2 pcs 5/2 double
solenoid, 1 pcs 5/3 double solenoid attached to
the manifold. All valves 24VDC. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by thread
DCV group with manifold
Adjustable value 0-3 bar. Pressure adjustable
when the 24VDC solenoid energized.
Double pressure valve
Choosable 4 valves like 3/2 or 5/2 position,
single or double solenoid. 24VDC, 9 PIN or 25
PIN. Easily mounting and demounting to the
aluminum panel by thread.
Stack (cassette) valve
MDL-ADO112
MDL-ADO113
MDL-ADO114
MDL-ADO115
MDL-ADO158
MDL-ADO116
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
DIRECTIONAL CONTROL VALVES (DCV)
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO112
Made in Italy
3
4
5
2
1
M
MDL-ADO114 Made in Italy
3
4
5
2
1
M
MDL-ADO113
Made in Italy
3
4
5
2
1
M
MDL-ADO115
Made in Italy
31
M
MDL-ADO116
Made in Italy
31
M
MDL-ADO158
Made in Italy
3
4
5
2
1
17. For the AND logic application. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
AND valve
For the OR logic application. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
OR valve
Two pcs OR valve on the one body. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
Double or valve
For the YES logic application. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
YES valve
For the NOT application. Anodized aluminum
base. Easily mounting and demounting to the
aluminum panel by hand.
NOT valve
LOGIC VALVES
Anodized aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
Quick exhaust valve
For the MEMORY logic application. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
MEMORY valve
MDL-ADO143
MDL-ADO137
MDL-ADO138
MDL-AD0176
MDL-ADO140
MDL-ADO139
MDL-ADO141
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO143
Made in Italy
1
3
2
M
MDL-ADO138 Made in Italy
1 1
2
M
MDL-AD0176
Made in Turkey
1 1
2
M
MDL-ADO137
Made in Italy
1 1
2
1 1
2
Made in Italy
M
MDL-ADO140
Made in Italy
31
2
12
M
MDL-ADO141
Made in Italy
3
4
5
2
14
1
12
M
MDL-ADO139
31
2
10
18. AIR PREPARATION EQUIPMENTS
0,01 micron filterable. Aluminum injected filter
body. Clogging indicator. Easy mounting and
maintenance.
Extra fine filter
Float type automatic drain condensate.
Suitable all sizes.
Automatic drain
FR unit contain 2 pcs equipment like that filter
and regulator. Metal body with sight glass.
Mounting bracket.
Filter and regulator unit (FR)
Pressure value is adjustable and lockable.
Output pressure can be seen by a manometer.
Pressure regulator
40 micron, water trap, mounting bracket. Metal
body with sight glass. Glass made from
Standard filter
Lubricator
Used turbin oil 32 viscosity. Metal body with
sight glass. Glass made from policarbonate.
Mini type pressure regulator for fine to
adjusting air pressure
Finger type pressure regulatorMDL-ADO119
MDL-ADO122
MDL-ADO121MDL-ADO123MDL-ADO120MDL-ADO118MDL-ADO007
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO123
Made in Italy
M
MDL-ADO120
Made in Italy
M
MDL-ADO007
Made in Italy
M
MDL-ADO118
Made in Italy
M
MDL-ADO121
Made in Italy
M
MDL-ADO119
Made in Italy
M
MDL-ADO122
Made in Italy
19. FLOW CONTROL VALVES (FCV)
1 in 7 out. Hose diameter for input 6 mm, for
output 4 mm.
Distrubuter
Used to flowing or unflowing air. Attached after
filter regulator unit.
On-off valve
Metal body. Marked arrow to one side for
flowing direction.
Check valve
Adjustable flow rate by thread. Anodized
aluminum base. Usable meter-in or meter-out.
Easily mounting and demounting to the
aluminum panel by thread.
Flow control valve with one way
Adjustable flow rate by thread. Line type, 4 mm
hose diameter. Usable meter-in or meter-out.
Line type flow control valve with one way
Check valve with pilotted
Used to locking actuators like cylinder and
motor. When the signal send to it unlocked.
MDL-ADO009
MDL-ADO010
MDL-ADO149
MDL-ADO145
MDL-ADO144
MDL-ADO148
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO148
Made in Italy
1 2
M
MDL-ADO145
Made in Italy
1 2
M
MDL-ADO149
Made in Italy
1
2
X
M
MDL-ADO144
Made in Italy
1 2
M
MDL-ADO010
Made in Turkey
1
2 2 2 2
2 22
M
MDL-ADO009
Made in Italy
1 2
20. VACUUM EQUIPMENTS
Usable NO or NC same time. Adjustable by
easily.
Pneumatic timer
When the air pressure increased to set value it
is switched. Anodized aluminum base. Easily
mounting and demounting to the aluminum
panel by hand.
Pneumatic pressure switch
Using for vacuum generating. Vacuum pressure
adjustable by hand.
Vacuum generator
When the vacuum pressure increased to set
value is switched. Anodized aluminum base.
Easily mounting and demounting to the
Vacuum switch
20 mm diameter, made from PU
Vacuum pad
Vacuum pad with bar
20 mm diameter, made from PU with metal bar.
PNEUMATIC TIMER AND PRESSURE SWITCH
MDL-ADO150
MDL-ADO152
MDL-ADO151K
MDL-ADO151U
MDL-ADO136
MDL-ADO124
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO150
Made in Italy
1
3
V
M
MDL-ADO152
Made in Italy
1
2
V
4
M
MDL-ADO136
Made in Italy
a A b X
1 2 123
M
MDL-ADO151K
Made in Italy
V
M
MDL-ADO151U
Made in Italy
V
M
Made in Italy
MDL-ADO124
3 1
2
12
Z
21. SENSORS
24VDC. Sensor attached special base. It is
usable NC or NO with 3-4 cables. Easily
mounting and demounting to the aluminum
panel by thread.
Optical sensor with reflected material
24VDC, 2 or 3 cable, 1,5 m length. It is
attachable to cylinder body with bracelet.
Cylinder attachment sensor with bracelet
Digital screen, 24VDC. Sensor attached special
base. Usable NC or NO. Easily mounting and
demounting to the aluminum panel by thread.
Pressure sensor
24VDC. Sensor attached special base. It is
usable NC or NO with 3-4 cables. Easily
mounting and demounting to the aluminum
panel by thread.
Inductive sensor
24VDC. Sensor attached special base. It is
usable NC or NO with 3-4 cables. Easily
mounting and demounting to the aluminum
panel by thread.
Capacitive sensor
Magnetic sensor
24VDC. Sensor attached special base. It is
usable NC or NO with 3-4 cables. Easily
mounting and demounting to the aluminum
panel by thread.
MDL-ADO159
MDL-ADO161
MDL-ADO162
MDL-ADO177
MDL-ADO163
MDL-ADO160
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO177
Made in Turkey
M
MDL-ADO162 Made in Turkey
M
MDL-ADO161
Made in Turkey
M
MDL-ADO163
Made in Turkey
M
MDL-ADO160
Made in Italy
M
MDL-ADO159
Made in Japan
22. SENSORS
Converter pneumatic signal to electrical signal.
There are 4 port like input, output, reset and
counting. Special designed aluminum base.
Easily mounting and demounting to the
aluminum panel by hand.
Pneumatic counter
24VDC. Sensor and reflecter attached special
base for using by independent. It is usable NC
or NO with 3-4 cables. Easily mounting and
demounting to the aluminum panel by thread.
Optical sensor with reflecter
24VDC, light source and light emitter attached
special base for using by independent. It is
usable NC or NO with 3-4 cables. Easily
mounting and demounting to the aluminum
panel by thread.
Optical sensor with source and emitter
24VDC, sensor attached special base. It is
usable NC or NO with 3-4 cables. Easily
mounting and demounting to the aluminum
panel by thread. Special knife should be used
for cutting cable.
Fiber optical sensor with special knife
Pressure switch
Switch attached special base from made of
anodized aluminum. It is usable NC or NO with
3-4 cables. 24VDC. Easily mounting and
demounting to the aluminum panel by hand.
MDL-ADO178
MDL-ADO157
MDL-ADO165
MDL-ADO177
MDL-ADO164
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO177
Made in Turkey
M
MDL-ADO164
Made in Turkey
Made in Italy
MDL-ADO157
M
P
M
MDL-ADO178
Made in Germany
31
2
12
M
MDL-ADO165
Made in Japan
23. ACCESSORIES
40 mm diameter, 0-12 bar. Rear threaded.
Pressure value visuable psi or bar. Anodized
aluminum base. Easily mounting and
demounting to the aluminum panel by hand.
Manometer
It is usable cutting plastic hose like PU, PA etc.
Hose cutter
Operated from left or right. Usable NC or NO. 3
pcs electrical socket attached to base for
banana cable.
Limit switch
Proportional regulator
0-10V or 4-20mA input signal therefore
adjustable output pressure. RS232 connected.
MDL ADO011
MDL-ADO168
MDL-ADO090
MDL-ADO117
PNEUMATIC-ELECTROPNEUMATİC EQUIPMENTS
ITEM NUMBER NAME AND FEATURES SYMBOL
PNEUMATIC-ELECTROPNEUMATIC
TRAINING SETEğitim Araçları
M
PNEUMATIC-ELECTROPNEUMATIC TRAINING SET
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
M
MDL-ADO168
Made in Italy
M
MDLADO011
Made in Turkey
MMDL-ADO090
Made in Turkey
M
MDL-ADO117
Made in Italy