Hydraulic and electrohydraulic training set using for hydraulic training. It contains 12 different unit that replaceable in below.
1. Training panel
2. Drawer unit
3. Input module
4. Buttons and signal lamps module
5. Relays module
6. Time relay module
7. Counter module
8. Motor module (DC motor, stepping motor, encoder)
9. PLC module (SIEMENS S7 1200)
10. Proportional directional control valve module
11. Proportional pressure control valve module
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides a summary of industrial robot options from Mitsubishi Electric, including:
1) It lists the main robot models, controllers, software, interfaces and other optional equipment available from Mitsubishi Electric for industrial robots.
2) It provides basic details on the RV-1A and RV-2AJ robots such as their dimensions, specifications and application examples.
3) It includes diagrams showing the layout and dimensions for installing the robot base and attaching hands.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
The document provides specifications for the Mitsubishi RV-1A and RV-2AJ series industrial robots. It describes the standard structural equipment that makes up the robots, including the robot arm and controller. It also covers optional equipment, maintenance parts, and the contents and specifications of the robot arm and controller components. The document is intended to help users understand the robots' characteristics and specifications.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides information on Fuji Electric's new FRENIC-Mini compact inverter. Key details include:
- The FRENIC-Mini offers high performance control of motors and equipment in a compact package with simple operation and global compatibility.
- It has rich functionality, compact design, easy operation/maintenance, and compatibility with existing Fuji products and networks.
- Specifications include voltage and frequency ranges, overload capabilities, enclosure type, cooling method, and applicable motor ratings from 0.1 to 3.7 kW.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides a summary of industrial robot options from Mitsubishi Electric, including:
1) It lists the main robot models, controllers, software, interfaces and other optional equipment available from Mitsubishi Electric for industrial robots.
2) It provides basic details on the RV-1A and RV-2AJ robots such as their dimensions, specifications and application examples.
3) It includes diagrams showing the layout and dimensions for installing the robot base and attaching hands.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
The document provides specifications for the Mitsubishi RV-1A and RV-2AJ series industrial robots. It describes the standard structural equipment that makes up the robots, including the robot arm and controller. It also covers optional equipment, maintenance parts, and the contents and specifications of the robot arm and controller components. The document is intended to help users understand the robots' characteristics and specifications.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides information on Fuji Electric's new FRENIC-Mini compact inverter. Key details include:
- The FRENIC-Mini offers high performance control of motors and equipment in a compact package with simple operation and global compatibility.
- It has rich functionality, compact design, easy operation/maintenance, and compatibility with existing Fuji products and networks.
- Specifications include voltage and frequency ranges, overload capabilities, enclosure type, cooling method, and applicable motor ratings from 0.1 to 3.7 kW.
The 50A8DD analog servo drive is designed to drive brush DC motors with up to 50A peak current. It has adjustable current limits, four quadrant regenerative braking, and integrated protection from overvoltage, overcurrent, and short circuits. The drive requires only a single unregulated DC power supply and communicates via PWM and direction signals.
The document describes the PDO 5580 stepper drive system. It provides specifications for the stepper drive, including its modes of operation, motor resolution options, input/output features, and electrical specifications. It also includes diagrams of the drive's mechanical outline and block diagram. Technical specifications are provided for NEMA 23 stepper motors that are compatible with the PDO 5580 drive.
The 25A20DD PWM servo amplifier is designed to drive brush DC motors with up to 25A of peak current. It has adjustable current limits, fault protection, and single supply operation. It interfaces with digital controllers via PWM and direction inputs to control motor speed and direction.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Ls catalog thiet bi tu dong imc iii-e_dienhathe.vnDien Ha The
The document describes the IMC-III Intelligent Motor Controller. IMC-III can control various motor start applications including direct start, Y-Δ start, forward/reverse start, reactor start, and inverter start. It provides motor protection functions such as overload protection, phase loss protection, and ground fault protection. IMC-III also allows for remote control and monitoring through communication protocols like Modbus over RS-485.
The 50A20DD analog servo drive is designed to drive brush DC motors with up to 50A peak current. It has adjustable current limits, four quadrant regenerative braking, and integrated protection from overvoltage, overcurrent, and short circuits. The drive requires a single 40-190VDC power supply and communicates via PWM and direction signals.
The document provides information about the Analog Servo Drive B40A20I. It can supply continuous current of 20A and peak current of 40A from a 40-190VDC power supply. It is designed to drive brushless DC motors and features adjustable current limits, input gain, and offset. It has protection against overheating, overcurrent, and short circuits.
The document provides instructions for setup and maintenance of Mitsubishi industrial robots. It discusses safety precautions that must be followed when handling or working with the robot. It explains that all teaching and maintenance work with power on requires special training. It also outlines various safety measures that should be in place like establishing work plans, setting emergency stop switches, installing safety fences, and inspecting equipment before starting work.
The document describes an analog servo drive called the BE40A20I. It has the following key specifications:
- It can provide a peak current of 40A and continuous current of 20A from a 40-190VDC power supply.
- It is designed to drive brushless DC motors and supports various feedback types including halls sensors and encoders.
- It has protection against overvoltage, undervoltage, overcurrent and other faults. It also has adjustable parameters like current limits and gains.
This document provides information on direct-on-line starters protected by manual motor starters for controlling three-phase asynchronous motors up to 15 kW. It includes details on coordination types, main technical data, and kit configurations for open-type starters using contactors and manual motor starters. Reversing starters and star-delta starters protected by overload relays are also summarized.
The document describes an analog servo drive that can drive brush DC motors. It provides peak currents of 30A and continuous currents of 15A. It operates from a 30-125VAC supply and has adjustable current limits, input gain, and offset. It supports feedback from tachometers and position sensors and can operate in different modes like current and velocity control. It has protections against overcurrent, overvoltage, and short circuits.
The document describes two universal I/O modules, the TXM1.8U and TXM1.8U-ML. Both modules have 8 inputs/outputs that can be individually configured as digital inputs, analog inputs, or analog outputs. The TXM1.8U-ML additionally includes an LCD display and local override facility. The modules have compact DIN rail housing, LED status indicators, and terminal bases that allow easy wiring and replacement of modules without rewiring.
Catalog biến tần Frenic Mega Fuji Electric-Beeteco.comBeeteco
The document describes Fuji Electric's FRENIC-MEGA inverter. It has been developed to support a wide range of applications with improved performance, functionality, environmental awareness, and easy maintenance compared to previous models. Key features highlighted include improved acceleration and overload capabilities, enhanced response time, expanded brake circuit capacity, and various functions to accommodate different needs.
VLT® Micro Drive is a genuine VLT® frequency converter with unsurpassed reliability, user-friendliness, condensed functionality, and extremely easy to commission. Terminal numbers are named in the same manner as in the rest of the VLT® family. It’s developed and manufactured by Danfoss Drives, the leading drives experts since 1968 and creators of VLT® – The Real Drive. For more info, visit http://www.danfoss.in/
The document provides information about the Analog Servo Drive B30A8. It can supply continuous current of 15A and peak current of 30A from a 20-80VDC power supply. It is designed to drive brushless DC motors and features adjustable current limits, four quadrant regenerative operation, and protection against overheating and short circuits. It can interface with digital controllers or operate stand-alone and has modes for current control, duty cycle control, hall velocity control and velocity control.
The Analog Servo Drive B25A20I is designed to drive brushless DC motors with a peak current of 25A and continuous current of 12.5A. It can interface with digital controllers or operate stand-alone using a single unregulated DC power supply between 40-190VDC. The drive features adjustable current limits, input gain, and offset using potentiometers as well as selectable operating modes and commutation phasing using DIP switches. It is compliant with various safety and EMC standards including UL, CE, and RoHS.
Explore the compact inverter WJ200 series built for excellent performance and user-friendliness.
To learn more about Hitachi Inverters, visit: https://www.hitachi-iesa.com/ac-drives-inverters
Catalog Biến tần Frenic Multi Fuji (Fuji Electric) - Beeteco.comBeeteco
Catalog Biến tần Frenic Multi Fuji - Beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog: Inverter Frenic-Lift Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The FRENIC-Mini inverter provides compact and flexible control for a variety of machines and equipment through its wide range of functions, compact size, simple operation, and global compatibility. It offers high starting torque, energy savings functions, PID control, and protective functions to suit applications such as conveyors, fans, pumps, and food processing machines. The inverter is simple to operate and install, with optional parts allowing remote control, communications, and compliance with various global standards.
Pneumatic & Electropneumatic Training SetFaruk Kartal
The document provides information on a pneumatic-electropneumatic training set. It includes descriptions of various modules and components that make up the training set, such as a control and monitoring panel with input, button, relay, timer, counter, motor and PLC modules. It also describes pneumatic equipment like cylinders, grippers, a pneumatic motor and directional control valves. The training set is designed to be modular for flexibility and components can be easily mounted and removed from the mounting panels.
The 50A8DD analog servo drive is designed to drive brush DC motors with up to 50A peak current. It has adjustable current limits, four quadrant regenerative braking, and integrated protection from overvoltage, overcurrent, and short circuits. The drive requires only a single unregulated DC power supply and communicates via PWM and direction signals.
The document describes the PDO 5580 stepper drive system. It provides specifications for the stepper drive, including its modes of operation, motor resolution options, input/output features, and electrical specifications. It also includes diagrams of the drive's mechanical outline and block diagram. Technical specifications are provided for NEMA 23 stepper motors that are compatible with the PDO 5580 drive.
The 25A20DD PWM servo amplifier is designed to drive brush DC motors with up to 25A of peak current. It has adjustable current limits, fault protection, and single supply operation. It interfaces with digital controllers via PWM and direction inputs to control motor speed and direction.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Ls catalog thiet bi tu dong imc iii-e_dienhathe.vnDien Ha The
The document describes the IMC-III Intelligent Motor Controller. IMC-III can control various motor start applications including direct start, Y-Δ start, forward/reverse start, reactor start, and inverter start. It provides motor protection functions such as overload protection, phase loss protection, and ground fault protection. IMC-III also allows for remote control and monitoring through communication protocols like Modbus over RS-485.
The 50A20DD analog servo drive is designed to drive brush DC motors with up to 50A peak current. It has adjustable current limits, four quadrant regenerative braking, and integrated protection from overvoltage, overcurrent, and short circuits. The drive requires a single 40-190VDC power supply and communicates via PWM and direction signals.
The document provides information about the Analog Servo Drive B40A20I. It can supply continuous current of 20A and peak current of 40A from a 40-190VDC power supply. It is designed to drive brushless DC motors and features adjustable current limits, input gain, and offset. It has protection against overheating, overcurrent, and short circuits.
The document provides instructions for setup and maintenance of Mitsubishi industrial robots. It discusses safety precautions that must be followed when handling or working with the robot. It explains that all teaching and maintenance work with power on requires special training. It also outlines various safety measures that should be in place like establishing work plans, setting emergency stop switches, installing safety fences, and inspecting equipment before starting work.
The document describes an analog servo drive called the BE40A20I. It has the following key specifications:
- It can provide a peak current of 40A and continuous current of 20A from a 40-190VDC power supply.
- It is designed to drive brushless DC motors and supports various feedback types including halls sensors and encoders.
- It has protection against overvoltage, undervoltage, overcurrent and other faults. It also has adjustable parameters like current limits and gains.
This document provides information on direct-on-line starters protected by manual motor starters for controlling three-phase asynchronous motors up to 15 kW. It includes details on coordination types, main technical data, and kit configurations for open-type starters using contactors and manual motor starters. Reversing starters and star-delta starters protected by overload relays are also summarized.
The document describes an analog servo drive that can drive brush DC motors. It provides peak currents of 30A and continuous currents of 15A. It operates from a 30-125VAC supply and has adjustable current limits, input gain, and offset. It supports feedback from tachometers and position sensors and can operate in different modes like current and velocity control. It has protections against overcurrent, overvoltage, and short circuits.
The document describes two universal I/O modules, the TXM1.8U and TXM1.8U-ML. Both modules have 8 inputs/outputs that can be individually configured as digital inputs, analog inputs, or analog outputs. The TXM1.8U-ML additionally includes an LCD display and local override facility. The modules have compact DIN rail housing, LED status indicators, and terminal bases that allow easy wiring and replacement of modules without rewiring.
Catalog biến tần Frenic Mega Fuji Electric-Beeteco.comBeeteco
The document describes Fuji Electric's FRENIC-MEGA inverter. It has been developed to support a wide range of applications with improved performance, functionality, environmental awareness, and easy maintenance compared to previous models. Key features highlighted include improved acceleration and overload capabilities, enhanced response time, expanded brake circuit capacity, and various functions to accommodate different needs.
VLT® Micro Drive is a genuine VLT® frequency converter with unsurpassed reliability, user-friendliness, condensed functionality, and extremely easy to commission. Terminal numbers are named in the same manner as in the rest of the VLT® family. It’s developed and manufactured by Danfoss Drives, the leading drives experts since 1968 and creators of VLT® – The Real Drive. For more info, visit http://www.danfoss.in/
The document provides information about the Analog Servo Drive B30A8. It can supply continuous current of 15A and peak current of 30A from a 20-80VDC power supply. It is designed to drive brushless DC motors and features adjustable current limits, four quadrant regenerative operation, and protection against overheating and short circuits. It can interface with digital controllers or operate stand-alone and has modes for current control, duty cycle control, hall velocity control and velocity control.
The Analog Servo Drive B25A20I is designed to drive brushless DC motors with a peak current of 25A and continuous current of 12.5A. It can interface with digital controllers or operate stand-alone using a single unregulated DC power supply between 40-190VDC. The drive features adjustable current limits, input gain, and offset using potentiometers as well as selectable operating modes and commutation phasing using DIP switches. It is compliant with various safety and EMC standards including UL, CE, and RoHS.
Explore the compact inverter WJ200 series built for excellent performance and user-friendliness.
To learn more about Hitachi Inverters, visit: https://www.hitachi-iesa.com/ac-drives-inverters
Catalog Biến tần Frenic Multi Fuji (Fuji Electric) - Beeteco.comBeeteco
Catalog Biến tần Frenic Multi Fuji - Beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog: Inverter Frenic-Lift Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The FRENIC-Mini inverter provides compact and flexible control for a variety of machines and equipment through its wide range of functions, compact size, simple operation, and global compatibility. It offers high starting torque, energy savings functions, PID control, and protective functions to suit applications such as conveyors, fans, pumps, and food processing machines. The inverter is simple to operate and install, with optional parts allowing remote control, communications, and compliance with various global standards.
Pneumatic & Electropneumatic Training SetFaruk Kartal
The document provides information on a pneumatic-electropneumatic training set. It includes descriptions of various modules and components that make up the training set, such as a control and monitoring panel with input, button, relay, timer, counter, motor and PLC modules. It also describes pneumatic equipment like cylinders, grippers, a pneumatic motor and directional control valves. The training set is designed to be modular for flexibility and components can be easily mounted and removed from the mounting panels.
This document summarizes a student project submission for a lifting storage station. It includes introductions to the system and why it is needed. Components like sensors, motors, cylinders and valves are described along with specifications. A flow chart outlines the process of differentiating metals from non-metals on a conveyor and lifting them into storage. Costs are provided for the main components and market outlook information is given for automated storage and retrieval systems.
The document describes an analog servo drive called the BE25A20FAC. It has the following key specifications:
- It can deliver up to 25A of peak current and 12.5A of continuous current from a 30-130V AC power supply.
- It is designed to drive brushless DC motors and features four quadrant regenerative operation, adjustable current limits, and selectable operating modes including current, open loop, and encoder velocity modes.
- It provides motor commutation from hall sensors or an encoder, and supports feedback from halls, encoders, or a tachometer.
- It has adjustable parameters like loop gain, current limit, input gain and offset via onboard potentiometers.
The 30A8DD analog servo drive is designed to drive brush DC motors with up to 30A of peak current. It has adjustable current limits, fault protection, and digital and analog interfaces. It requires only a single DC power supply and provides isolated digital inputs for PWM, direction, and inhibit signals.
The document describes the Analog Servo Drive BE30A8. It can provide up to 30A of peak current and 15A of continuous current from a 20-80VDC power supply. It is designed to drive brushless DC motors and protects against overloads. It has adjustable settings for current, velocity control, and commutation using potentiometers and dip switches.
The document describes an analog servo drive called the BE25A20I. It has the following key specifications:
- It can provide up to 25A of peak current and 12.5A of continuous current.
- It is designed to drive brushless DC motors and can operate in various modes like current, duty cycle, and velocity modes.
- It has protections against overheating, overvoltage, undervoltage, and short circuits.
- It can interface with encoders, Hall sensors, or tachometers for motor feedback and supports motors with three phases.
IMC-III is an intelligent motor controller that provides various motor protection and control functions within a single device. It can start motors using different methods like direct start, Y-Δ start, forward/reverse, and with a reactor. It also monitors for faults like overcurrent, undercurrent, phase loss, locked rotor, and ground faults. The IMC-III allows remote control and monitoring via communication protocols and supports flexible applications through programmable timers, user contacts, and external trip inputs.
Please read the manual carefully before using the product. The pictures, marks and
symbol in the manual belong to Acrel. The manual or part of it shall not be publicly
reprinted by people outside the company without written authorization.
This document provides information about the Analog Servo Drive BE25A20AC:
1) It is a PWM servo drive designed to drive brushless DC motors at high switching frequencies up to 25A of peak current and 12.5A of continuous current.
2) It has fully adjustable current and velocity control loops as well as protective features against overloads and faults.
3) The drive can operate in different modes such as current control, duty cycle control and encoder velocity control using potentiometers and DIP switches for configuration.
KE300A-01 single phase output inverter is a kind of inverter
special for single phase motor. It is based on the advanced
control platform of KE300A, combining the unique start and
control requirements of the single phase motor, and using
a brand-new flux vector control technology to achieve true
two phase orthogonal 90° flux vector control. With high start
torque and high efficiency of overall unit, it can be widely
applicable to single phase asynchronous motors, such as
fans, pumps, power tools, etc.
The document describes an analog servo drive model B100A8. It can provide up to 100A of peak current and 50A of continuous current from a 20-80VDC power supply. It is designed to drive brushless DC motors and features adjustable current limits, gain, and offset settings. It supports Hall sensor, encoder, and tachometer feedback and can operate in various modes including current and velocity control.
The document describes an analog servo drive that provides:
- Peak current of 100A and continuous current of 50A
- Adjustable settings for loop gain, current limit, input gain and offset using potentiometers
- Multiple operation modes including current, duty cycle, hall velocity and encoder velocity
- Protection against overvoltage, undervoltage, overcurrent and other faults
The document describes the Analog Servo Drive B25A20FAC. It is designed to drive brushless DC motors with a peak current of 25A and continuous current of 12.5A. It can operate on an AC supply voltage of 30-130VAC. The drive features adjustable current limits and gains, as well as multiple operating modes that can be selected with DIP switches including current mode, open loop, and hall velocity mode. It provides protection against overloads and includes status monitoring outputs.
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
This document provides information on the M/VTM Series Servo Drive AB100C200. It summarizes the drive's key specifications including its power range, features, modes of operation, command sources, feedback supported, and agency approvals. The document also includes block diagrams, pinout diagrams, switch settings, and other technical details.
Close-loop vector control
Inovance MD380 software
Infineon(<37kw)>37KW ) IGBT
Built-in PLC ,PID , AVR function
Torque control can be implemented in the CLVC mode.
Instantaneous power off , inverter keep running
Timing control function
Auto Stand-by and Sleep Mode
Fixed-length control &Torque control mode
RPM Monitoring Feature
Optional parts :Braking unit, I/O extension card, RS485 communication card, PROFIBUS-DP communication card, Differential input PG card, OC input PG card.etc.
The Analog Servo Drive B40A8I is designed to drive brushless DC motors at high switching frequencies. It can provide up to 40A of peak current and 20A of continuous current from a 20-80VDC power supply. The drive has adjustable current limits, input gain, and other parameters. It is fully protected against overloads and includes status indicators.
The document describes the Analog Servo Drive BDC30A8. It is designed to drive brushless DC motors with a peak current of 30A and continuous current of 15A. It has inputs for PWM, direction and inhibits. It is fully protected against overloads and short circuits. It is compliant with safety and EMC standards including UL, CE and RoHS.
The BE30A8I analog servo drive is designed to drive brushless DC motors. It has a peak current of 30A and continuous current of 15A. It can interface with digital controllers or operate stand-alone. Loop gain, current limit, and other parameters can be adjusted using on-board potentiometers. The drive provides current, open loop, and encoder velocity modes of operation.
Similar to Hydraulic Electro Hydraulic Training Set (20)
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
2. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
MDL-ADO 001
TRAINING TABLE
1210 mm (L), 800 mm (W), 1850 mm (H)
The main column sizes 90x90 mm
Moduler type anodized aluminum
Shock resistant laminate table
Lockable wheels
Portable and fixed
Can be used one side or double side
Equipment cabinet with drawer that produced sheet metal
Can be replaced 3 pcs drawer
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
3. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
MDL-ADO 004
1. Input module
2. Button and lamp module
3. Relay module
4. Digital timer module
5. Digital counter module
6. Encoder module
7. DC motor, step motor, encoder module
8. PLC module
9. Proportional directional control valve module
10.Proportional pressure control module
CONTROL AND MONITORING PANEL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
All modules together usable on training set or you can choice one of them. Electrical
elements are placed on a board made of aluminum with tihckness 4-5 mm for get
more space and easy of use. Thus, more element to be used in narrow area.
Command elements are done as single units instead of divided form. The benefit of
this; elements in case of malfunction or damage; the present system can be
modified
Control panel can be removed in a few seconds for the mounted on the table as a
channel. Closed and sealed on all sides to prevent ingress of dust. 4 mm measure
born socket are used on the panel; so all electrical connections are made easily by
banana cable.
Below modules placed
on control panel
CERTIFIED
4. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
1. INPUT MODULE: 230V AC input, 24V DC output power source. Emergency stop
button, on-off button. Short circuit protected.
2. BUTTON AND LAMP MODULE: 4 pcs button (3 pcs variable, 1 pcs
permanently). Each button has 2 contact that can be used as normally open or
normally closed. All buttons are usable for lamp. Lamp sockets for inputs and
outputs placed at the right of module
3. RELAY MODULE: There are 4 pcs. relay at the module. Each relay has 3 contact
that can be used as normally open or normally closed. When the relay coil is powered
it can be seen by signal lamps with stainless metal body. Protected class is Ip65
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
Input module
Button and lamp module
Relay module
5. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
4. DIGITAL TIMER MODULE: 48x48 mm digital timer provide high precision
operation time settings. Digital switches enable easy preset time settings. Digital
displays of elapsed time are also possible. Elapsed time (Up), remaining time
(Down) selectable. 2x4 count, 9 step interval. Easy programming and setting.
Sensor input type PNP or NPN. Protection class IP60 for front panel , IP20 for rear
panel. Visible timing and reset value.
5. COUNTING AND BUZZER MODULE: 48x48 mm digital counter provide high
precision operation counting settings. Digital switches enable easy preset count
settings. 2x4 Count. İt has 2 input (max. 9999Hz, 5V-30V pulse). Selectable
counting frequency 25-9999 Hz. NO ve NC relay for output. Protection class IP65 for
Front panel , IP20 for rear panel. Sensor input type PNP,NPN or encoder. Easy
programming and setting.
Counter and buzzer unit can be used alone. Timer and counting module can be used
together according to the selected feature of the elements as in the figure below
when a shortage of places.
6. OPTICAL ENCODER MODULE: 50 mm diameter aluminum injected body.
Spindle manufactured from stainless steel that 8 mm diameter. 100 pulse, 4000
RPM. Supply voltage 5-24VDC. Protection class IP 50, it has 6 cables.
Optical encoder unit can be used alone but this choice is not suitable for practice or
application. We recommend that; optical encoder, DC motor and step motor can be
used together as in the figure below; thus you can make many applications
TING AND BUZZER MODULE: 48x48 mm digita
operation counting settings. Digital switches ena
2x4 Count. İt has 2 input (max. 9999Hz, 5V-3
requency 25-9999 Hz. NO ve NC relay for output. P
el , IP20 for rear panel. Sensor input type PNP,
ming and setting.
nd buzzer unit can be used alone. Timer and countin
according to the selected feature of the elements
ortage of places.
CAL ENCODER MODULE: 50 mm diameter alum
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
Digital timer and counting module
6. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
7. DC MOTOR, STEP MOTOR, OPTICAL ENCODER MODULE: It has designed for
step motor and DC motor applications that attached encoder too. The return of the
motors to transferring throuh trigger belt and gears. Amounts of rotation the motors
controlled by encoder signal.
8. PLC MODULE: Used Simatic S7 1200, CPU 1212C PLC. 8 pcs input simulator, 8
pcs toggle momentary, 8 pcs stainless metal body signal lamp for input signal. Easy
setting digital potentiometer. Fast/normally output selectable. Independent input
signal by toggle switches.
PLC has 2 pcs analogue input. Visible analogue input signal by potentiometer. PTO,
PWM applications by selectable switch.
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining EquipmentsR, OPTICAL ENCODER MODULE: It has designed
plications that attached encoder too. The return of
trigger belt and gears. Amounts of rotation the mot
ic S7 1200, CPU 1212C PLC. 8 pcs input simulator, 8
stainless metal body signal lamp for input signal. Ea
Fast/normally output selectable. Independent inp
DC motor-step motor and encoder module
PLC module
7. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
9. PROPORTIONAL DIRECTIONAL CONTROL VALVE UNIT: The primary
function of the valve is to direct and meter fluid flow in proportion to current received
by the solenoid. This fluid flow controls the velocity, direction and acceleration or
deceleration of a work cylinder or hydraulic motor.
Power supply; 24V DC x 50W. Reverse-polarity protection. All outputs short-circuit
protected. PWM, short-circuit protected. Ramp-time Min. 50 ms and adjustment
rate 50 ms - 5s. Max. solenoid current; 1,6A. Deadband compensation; factory
setting (% of max. spool stroke)%25
The power amplifier has five voltage inputs (one inverting) and a current input for 0-
20mA. Adjustments for set zero point or deadband compensation and for gain allow
the amplifier to be easily tuned to the proportional control valve The ramp function
generator can be switched on and off using the “ramp enable” control.
Monitor points on the front panel allow measurement of the conditioned command
signal and either of spool position LVDT signal or for valves without LVDT) of solenoid
current.(“Conditioned command signal” is the input signal modified according to
settings of set zero point or deadband compens tion gain and ramp functions.)
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
ircuit protected. Ramp-time Min. 50 ms and adju
solenoid current; 1,6A. Deadband compensation;
stroke)%25
five voltage inputs (one inverting) and a current inp
set zero point or deadband compensation and for ga
y tuned to the proportional control valve The ramp
d on and off using the “ramp enable” control.
Proportional
directional control valve module
8. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Proportional driver contain below features:
Zero point
Deadband compensation
Gain functions
Ramp functions
Switchable ramp function generator for controlling rates of increase and decrease
of output
Electronic overload protection with automatic reset
Pulse width modulation (PWM) for high efficiency
Either current or voltage input signals
Standard input and output signals
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
[1]
t
t
A
A
B
B
P
24V 15V
I Max
[2]
[3]
[4]
[5]
[6]
24V supply voltage, green
15V control voltage, green
Solenoid output enabled, yellow
Solenoid output overload, red
LVDT failure, red
Drive to solenoid, yellow
Potentiometers
Deadband compensation, flow P to B
Deadband compensation, flow P to A
Gain, flow P to B
Gain, flow P to A
LED’S
LED’S
[7]
[8]
[9]
[10]
[12]
[14]
[15]
[16]
[11]
[13]
Potentiometers
Ramps enabled, yellow
Acceleration ramp
Deceleration ramp
Monitor points
Conditioned command signal MP1
Common ground 0V
Spool psition MP2
Front panel of proportional valve driver
Card holder
Proportional
valve driver
9. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
9. PROPORTIONAL PRESSURE CONTROL VALVE UNIT: An electro-hydraulic
proportional relief valve designed to regulate pressure in a hydraulic system in
proportion to an applied electrical input. These open-loop, single-stage valves can
be used for direct control of pressure in low flow systems or for pilot control of larger
pressure controls and for such applications as pressure controlled pumps.
Power supply; 24V DC x 40W, max. voltage range 20-34V (including ripple) and
reverse polarity protected. Ramp-time; min. 20 ms and adjustment rate 20 ms-2s.
Max. solenoid current; 1,6A with short circuit protected. Power drive, pulse-width
modulated (PWM). Gain control.
The power amplifier has five voltage inputs (one inverting) and a current input for 0-
20 mA. The “set minimum” and “gain” adjustments allow the amplifier to be easily
tuned to the proportional pressure control valve. The ramp potentiometer on the
front panel simultaneously adjusts the output acceleration and deceleration. The
ramp function is normally enabled; it can be permanently disabled by an external
wire link, or selectively enabled/disabled using a remotely located switch. Monitor
points on the front panel allow measurement of the conditioned command input
signal (after set minimum, gain and ramp functions) and of the solenoid current. The
latter is scaled to give 1 volt per ampere.
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
ch applications as pressure controlled pumps.
0W, max. voltage range 20-34V (including ripple)
Ramp-time; min. 20 ms and adjustment rate 20 ms
A with short circuit protected. Power drive, pulse-w
trol.
Proportional
pressure control valve module
10. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Proportional driver contain below features:
User-friendly front panel with all the necessary adjustments, LEDs and monitor
points
Electronic overload protection with automatic reset
Pulse width modulation (PWM) for high efficiency
Ramp function generator for control of pressure increase and decrease rates
Wider supply voltage range plus increased tolerance to ripple
Either current or voltage input signals
Low supply voltage protection
Ramp setting unaffected by gain adjustment
Constant trigger voltage for deadband compensation
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
[1]
[2]
[3]
[4]
24V supply voltage, green
15V control valtage, green
Solenoid output enabled, yellow
Solenoid output overload, red
LED’S
Potentiometers
Monitor points
t
t
24V 15V
I Max
[5] Current output to solenoid, yellow
[6] Set minimum
[7] Gain
[8-9]Ramp setting
[9] Conditioned command signal
[12] Common ground
[13] Solenoid current
Front panel of proportional valve driver
Card holder
Proportional
valve driver
11. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
HYDRAULIC HOSE SET
700 mm longest 6 pcs hydraulic hose
1000 mm longest 6 pcs hose
Quick coupling type for easy connecting
Flexible
Easy bending and dont crack
Working pressure 150 bar burst pressure 600 bar
System 2012 (easy mounting-demounting, dont leak)
ALUMINUM MOUNTING PANEL
1060x750 mm sizes
Moduler type; easy carrying, mounting and demounting
It is used one side or double side
Stainless, no oxidation, shock resistant, anodized aluminum
T slots for mounting hydraulic equipments
Solid body to prevent vibrations
All edges are rounded for safety work Its not sharp
Used in special caps to hide the connection bolts
Either independently mounted on the table can be used
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
12. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
M
MDL-ADO006
MDL-ADO008
Aluminium enjected body
About 25 lt tank volume
AC 220 V, 2 kW electric motor
Varriable displacement type vane pump (5 lt/min)
Movable by easily
Filling strainer and breathing cup (with air filter)
Return filter (with clogging indicator)
Level and temperature gauge
Drain plug
Safety valve
Distribute block
Pressure gauge with glycerin
On off switch
Power cable
Note: Optionally, the coolant can be added
Resistant steel body
Can be seen internal with taransparent windows
About 25 lt tank volume
AC 220 V, 1,5 kW electric motor
Gear pump
There are 4 wheels on the bottom and movable
Filling strainer and breath cup (with air filter)
Suction filter
Level and temperature gauge
Drain plug
Safety valve
Distribute block
Pressure gauge with glycerin
On off switch
Power cable
POWERPACKS
Option-1
Option-2
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
13. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
POWERPACKS
Option-3
Aluminum cast body
About 8 liter tank volume
Usable both side of training table
Easy mounting and demounting
AC 220 V, 0,75 kW, 1450 RPM electrical motor
Gear pump with fixed displacement (ap. 2 lt/min)
Designed for mobile hydraulic system
Filling and breathing cap
Drain plug
Safety valve
Distributer block
Suitable for check valve and directional valve
On-off switch
Energy cable
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
14. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
One selonoid, 24VDC, 4 mm socket,
with LED lamp
4/2 Directional Control Valve
Double selenoid, 24VDC, 4 mm socket,
with LED lamp
4/3 Directional Control Valve
(Closed Type Middle Position)
Double selenoid, 24VDC, 4 mm socket,
with LED lamp
4/3 Directional Control Valve (P-T
Type Middle Position)
Double selenoid, 24VDC, 4 mm socket,
with LED lamp
4/3 Directional Control Valve (A-B-
T Type Middle Position)
Double selenoid, 24VDC, 4 mm socket,
with LED lamp
4/3 Directional Control Valve (P-A-
B Type Middle Position)
Double selenoid, 24VDC, 4 mm socket,
with LED lamp
4/3 Directional Control Valve (H
Type Middle Position)fi (H Tipi
Double selenoid, 24VDC, 4 mm socket,
with LED lamp
4/2 Directional Control Valve
P T
A B
M
MDL-ADO038
Made in Germany
P T
A B
M
MDL-ADO039
Made in Germany
M
MDL-ADO040
Made in Germany
P T
A B
M
MDL-ADO041
Made in Germany
P T
A B
M
MDL-ADO042
Made in Germany
P T
A B
M
MDL-ADO043
Made in Germany
P T
A B
M
MDL-ADO044
Made in Germany
P T
A B
MDL-ADO038
MDL-ADO039
MDL-ADO040
MDL-ADO041
MDL-ADO042
MDL-ADO043
MDL-ADO044
ELECTROHYDRAULIC DIRECTIONAL CONTROL VALVES
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
15. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Lever command, P-T type middle
position
4/3 Directional Control Valve
Lever command, A-B-T type middle
position
4/3 Directional Control Valve
Lever command, closed type middle
position
4/3 Directional Control Valve
Lever command, spring return
4/2 Directional Control Valve
M
MDL-ADO030
Made in Germany
P T
A B
M
MDL-ADO029
Made in Germany
P T
A B
M
MDL-ADO028
Made in Germany
P T
A B
M
MDL-ADO026
Made in Germany
P T
A B
MDL-ADO026
MDL-ADO028
MDL-ADO029
MDL-ADO030
Lever command, with detent
4/2 Directional Control Valve
M
MDL-ADO027
Made in Germany
P T
A B
MDL-ADO027
HAND OPERATED DIRECTIONAL CONTROL VALVE
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
16. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Lever command, P-A-B type middle
position
4/3 Directional Control Valve
Lever command, H type middle position
4/3 Directional Control Valve
M
MDL-ADO032
Made in Germany
P T
A B
M
MDL-ADO031
Made in Germany
P T
A B
MDL-ADO031
MDL-ADO032
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
PROPORTIONAL VALVES
4/3 Proportional directional control valve
MMDL-ADO097
Made in England
P T
A B
Direct and meter fluid flow in proportion
to current received by the solenoid. The
valves’ standard ISO 4401-03. The
engineering resin junction box is NEMA 4
rated for resistance to water and all
commonly used industrial fluids.
Proportional pressure control valve
It can be used for direct control of
pressure in low flow systems or for pilot
control. The valves’ standard ISO 4401-
03. The engineering resin junction box is
NEMA 4 rated for resistance to water and
all commonly used industrial fluids.
1
MDL-ADO155
2
Made in England
M
Proportional flow control valve
Direct and meter fluid flow in proportion
to current received by the solenoid. The
valves’ standard ISO 4401-03. The
engineering resin junction box is NEMA 4
rated for resistance to water and all
commonly used industrial fluids.
M
MDL-ADO179
Made in USA
P T
A B
MDL-ADO155
MDL-ADO179
MDL-ADO097
ORDER CODE NAME AND FEATURES SYMBOL
17. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
For using P (pressure line)-T (tank line)
4 pcs for P line
4 pcs for T line
Line Distrubuter
Optional 10 µ or 20 µ
Suitable body for high operation pressure
Visual or electrical type clogging indicator
Easy mounting or demounting
Pressure Filter
Gear type, high tourque, easy
mounting
Hydromotor
20x200 mm (20 mm diameter,
200 mm stroke), light serie,
Hydraulic cylinder
0-160 Bar, ø63 mm, with glycerin
Pressure gauge (Manometer)
HYDRAULIC ACTUATOR
OIL PREPARE EQUIPMENTS
M
MDL-ADO012
Made in Turkey
M
MDL-ADO015
Made in Italy
P
T
M
MDL-ADO107
Made in Turkey
M
MDL-ADO153
Made in Germany
M
MDL-ADO074
Made in Turkey
MDL-ADO012
MDL-ADO015
MDL-ADO107
MDL-ADO153
MDL-ADO074
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
18. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Cartridge type, pressure value setting by
hand. The valves open when the
depressurized pilot line. Semi automatic or
full automatic
Pressure Safety Valve With Pilot
Remote Control
Cartridge type, pressure value setting by
hand
Pressure Safety Valve With Direct
Command
Cartridge type, pressure value setting
by hand
Pressure Sequence Valve
PRESSURE CONTROL VALVES
Pressure value setable, 3 line, cartridge type
Pressure Reducing Valve
Adjustable, 3 way, pilot operated, cartridge
type
Load Holding Valve
Cartridge type, pressure value setting
by hand
Pressure Safety Valve
By alert a pilot signal that adjustable value of
the accumulator starts the process of
charging when the pressure dropped to the
minimum value and finishes the process of
charging when the pressure increased to the
maximum value
Accumulator Charging Valve
1
MDL-ADO054
2
Made in Germany
1
MDL-ADO057
2
Made in Germany
1
2
Made in Germany
MDL-ADO056
3
1
MDL-ADO055
2
Made in Germany
M
1
2 3
Made in Germany
MDL-ADO058
M
M
1
2
Made in Germany
MDL-ADO060
3
M
1
2
Made in Germany
MDL-ADO059
M
M
M
MDL-ADO054
MDL-ADO057
MDL-ADO056
MDL-ADO055
MDL-ADO058
MDL-ADO060
MDL-ADO059
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
19. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Line type. Adjustable, indicated throttle
value, one way, with check valve.
One Way Flow Control Valve
Line type, adjustable, indicated throttle
value, 2 way
2 Way Flow Control Valve
Cracking pressure 1bar
Check Valve
Line type. Adjustable, indicated throttle
value, one way, with check valve
independent of the load
2 Way Precision Flow Control Valve
Cartridge type, one way, with check
valve independent of the load
2 Way Precision Flow Control Valve
Cracking pressure 5 bar
Check Valve
FLOW CONTROL VALVES
12
5 Bar
Made in Germany
M
MDL-ADO072
A B
Made in Germany
M
MDL-ADO070
12
1 Bar
Made in Germany
M
MDL-ADO073
A B
Made in Germany
M
MDL-ADO068
A B
Made in Germany
M
MDL-ADO071
A B
Made in Germany
M
MDL-ADO069
MDL-ADO069
MDL-ADO068
MDL-ADO071
MDL-ADO070
MDL-ADO073
MDL-ADO072
Modular type 4/3 position directional
control and double flow control valve.
Attahcable pressure control and pilot
actuated check valve.
Modular Valve Group
MDL-ADO154
M
MDL-ADO154
Made in Germany
P T
A B
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
20. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
FLOW CONTROL VALVES
0,75 lt volume bladder type
Accumulator block
Safety valve (fixed pressure value for safety)
Ball type on-off valve
Manometer with glycerin
Mounting equipment
Accumulator Group
Gear type
Flow Divider Valve
Cartridge type
Flow Divider Valve
Cartridge type locking valve
Check Valve With Pilot
Line type locking valve
Check Valve With Pilot
Line type locking valve, two piece one body
Double Check Valve With Pilot
Made in Germany
M
A B
C D
MDL-ADO063
1
2 3
Made in Germany
MDL-ADO061
M
1
2 3
Made in Germany
MDL-ADO062
M
M
ST 10 Made in Germany
MDL-ADO064
2
3 4
M
ST 11 Made in Turkey
MDL-ADO065
PT
A
T
M
Made in Germany
MDL-ADO061
MDL-ADO063
MDL-ADO062
MDL-ADO064
MDL-ADO065
MDL-ADO066
MDL-ADO066
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
21. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
Digital display swivel two axis
accordance with the direction point
of view. Signaling at the minimum and
maksimum pressure,adjustable
hysteresis value. Socket connection.
Pratical, easy to use.
Digital Monometer/pressure switch
Can see value setting from micrometric
handwheel can be used normally open
or normally closed. Output signals.
Pressure value setting by hand
Pressure Switch
Convert the electrical signal pressure
value. Socket connection.
Pressure Transmitter
Convert the electrical signal
temperature value. Socket connection.
Temperature Transmitter
Convert the electrical signal flow value.
Socket connection.
Flow Transmitter
Portable type information recorder.
Suitable predictive maintenance
applications. All transducers and
transmitters connectable. Also it can be
use for display
Handheld Terminal
TRANSDUCER VE TRANSMITTERS
1
Made in Germany
MDL-ADO085
M
2
3
P
M
MDL-ADO075
Made in Germany
M
MDL-ADO086
Made in Germany
PT
M
MDL-ADO087
Made in Germany
TT
M
MDL-ADO088
Made in Germany
FT
M
MDL-ADO089
Made in Germany
MDL-ADO085
MDL-ADO075
MDL-ADO086
MDL-ADO087
MDL-ADO088
MDL-ADO089
Electrical limit switch with lever roller.
Actuated from left or right. Usable NC or
NO. It has 3 socket for cable connection.
Electrical Limit Switch
M
MDL-ADO090
Made in Turkey
MDL-ADO090
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments
22. M
GüzelyurtMah. Esnaf ve Sanatkarlar Çarşısı 5744 Sk. No:3/A MANISA / TURKEY +90.236.233 15 49
www.modulteknik.com
HYDRAULIC ELECTROHYDRAULIC TRAINING SET
24VDC. Sensitive for metals or non metallic.
Can be used NO or NC. Sensor symbol marked
bottom panel. 3 or 4 electrical socket
attached upper panel.
Capacitive sensor
24VDC. Sensitive for metals. Can be used NO
or NC. Sensor symbol marked bottom panel.
3 or 4 electrical socket attached upper panel.
Inductive sensor
Sensitive for magnetic field. Can be used NO
or NC. Sensor symbol marked bottom of
panel. 3 or 4 electrical socket attached upper
panel.
Magnetic Sensor
Sensitive all material. Wide detection range.
Can be used NO or NC. Sensor symbol
marked bottom of panel. 3 or 4 electrical
socket attached upper panel.
Optical sensor (with reflected material)
Sensitive all material. Wide detection range.
Can be used NO or NC. Sensor symbol
marked bottom of panel. 3 or 4 electrical
socket attached upper panel.
Optical sensor (with reflecter)
Sensitive all material. Wide detection range.
Can be used NO or NC. Sensor symbol
marked bottom of panel. 3 or 4 electrical
socket attached upper panel.
Fiberoptical sensor
SENSORS
Made in France
MDL-ADO165
M
+
-Made in France
MDL-ADO161
M
Made in France
MDL-ADO162
M
+
-
Made in FranceMDL-ADO177
M
+
-
M
MDL-ADO163
Made in France
M
MDL-ADO164
Made in France
MDL-ADO161
MDL-ADO162
MDL-ADO177
MDL-ADO163
MDL-ADO165
MDL-ADO164
ORDER CODE NAME AND FEATURES SYMBOL
HYDRAULIC-ELECTROHYDRAULIC
TRAINING SETTraining Equipments