Designed reliability based on strong construction for the demanding high speed production. Our cap feeder, orientator and cap sorter can work with cappers from 3000 to 60,000bph
OVERVIEW
Due to the growing number of cars and trucks worldwide, used tires are available in large quantities at a very low cost. With a little smart recycling, you can get a whole lot of used tires: granule in various sizes, steel and Profit. Sales revenue depends naturally on the quality of the output material a process that is as efficient as possible. PICCOLI has designed a system dedicated to tire recycling, which ultimately produces high quality materials for recycling. Final products can be fragments for thermal recycling, predominantly in the cement and rubber industry of approximately 5 mm
PICCOLI GREEN TECHNOLOGY , PICCOLI MOTORS , PGT GROUP
Designed reliability based on strong construction for the demanding high speed production. Our cap feeder, orientator and cap sorter can work with cappers from 3000 to 60,000bph
OVERVIEW
Due to the growing number of cars and trucks worldwide, used tires are available in large quantities at a very low cost. With a little smart recycling, you can get a whole lot of used tires: granule in various sizes, steel and Profit. Sales revenue depends naturally on the quality of the output material a process that is as efficient as possible. PICCOLI has designed a system dedicated to tire recycling, which ultimately produces high quality materials for recycling. Final products can be fragments for thermal recycling, predominantly in the cement and rubber industry of approximately 5 mm
PICCOLI GREEN TECHNOLOGY , PICCOLI MOTORS , PGT GROUP
Prospect regarding waste water solutions and equipment. INDUSTRIAL WASTE, URBAN SEWAGE, SPECIFIC
EQUIPMENT, PROCESS WATER, ANAEROBIC WASTE TREATMENT, SLUDGE MANAGMENT, MEMBRANE SYSTEMS
In the National and International market place, Enrico Molteni S.r.l., offers its experience and skills in the design and production of machines and industrial plants to assist the production processes of the chemical, food and cosmetic industries.
More particularly, these production processes are: agitation, dispersion, mixing, refining and washing.
(https://www.jatindraengineeringcorporation.com/) With an experience of more than 40 years in the industry we are a part of, we have been able to gain expertise in the manufacture of hot and cold rolling mills, sheet processing lines and steel plant equipment. And today, we proudly boast of being a leader in the same. Our products attract immense demand from India and other countries.
Friul Filiere S.p.a. operates in the field of
plastic materials at the international level
since more than 40 years. Known as the only
Italian Company able to supply complete lines
and toolings for the extrusion of all
thermoplastic materials, accompanies
customers throughout the development of
personalized projects, from the initial request
to the delivery of a “Turnkey Project”.
La Meccanica propone soluzioni per il trattamento idrotermico e garantisce la massima qualità tecnologica dei propri impianti.
Scopri di più sulle nostre Tecniche di Sanificazione dei mangimi con trattamento idrotermico nel articolo pubblicato su Tecnica Molitoria
Prospect regarding waste water solutions and equipment. INDUSTRIAL WASTE, URBAN SEWAGE, SPECIFIC
EQUIPMENT, PROCESS WATER, ANAEROBIC WASTE TREATMENT, SLUDGE MANAGMENT, MEMBRANE SYSTEMS
In the National and International market place, Enrico Molteni S.r.l., offers its experience and skills in the design and production of machines and industrial plants to assist the production processes of the chemical, food and cosmetic industries.
More particularly, these production processes are: agitation, dispersion, mixing, refining and washing.
(https://www.jatindraengineeringcorporation.com/) With an experience of more than 40 years in the industry we are a part of, we have been able to gain expertise in the manufacture of hot and cold rolling mills, sheet processing lines and steel plant equipment. And today, we proudly boast of being a leader in the same. Our products attract immense demand from India and other countries.
Friul Filiere S.p.a. operates in the field of
plastic materials at the international level
since more than 40 years. Known as the only
Italian Company able to supply complete lines
and toolings for the extrusion of all
thermoplastic materials, accompanies
customers throughout the development of
personalized projects, from the initial request
to the delivery of a “Turnkey Project”.
La Meccanica propone soluzioni per il trattamento idrotermico e garantisce la massima qualità tecnologica dei propri impianti.
Scopri di più sulle nostre Tecniche di Sanificazione dei mangimi con trattamento idrotermico nel articolo pubblicato su Tecnica Molitoria
The company produces technologically advanced machines, with high quality standards, and it is a leader in the production of pellets of wood, plastic animal feed, fertilizer and biomass processing.
La Meccanica Srl di Reffo was established in 1961 in Cittadella, Padua (Italy) and it is leader in the production of technologically advanced machines with high quality standards. For over 50 years, the company has been operating in the animal feed, fertilizer and bio-energy fields, producing complete lines for pellet: pellet mills, counterflow or horizontal coolers, crumblers, hammer mills, vibrating sifters, fat coating system machines, mixers and expanders. It also produces dies, rolls and spare parts for all the main brands of pellet mills.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex ProofsAlex Pruden
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
1. Flange A
A
A
A
2200 2140 350
530
476
2140
1240
1420
650
1420 780
2518268
1155
2200 190.5
190
158158158
Ø12
144 144 144 144 144
650
770
404
12
900
965
2. 3
A A
471 21
2200 2140 350
530
476
183
1523
2718
650
256 1420 780 2518268
1028
190
404
12243 1030
965663
La Meccanica: machinery and plant production
Engineering Division
- Consulting
- Solutions
- Equipment
Customer Care Division
- Consulting
- Dies
- Roller shells
- Consumables
3. 4 5
The company is about an hour’s
drive from Venice and currently
employs about 55 people, 40 of
whom work in the production area.
La Meccanica offers its services
directly or indirectly in about 30
countries around the world, and the
production facility has an overall
surface area of about 10,000 m2
.
La Meccanica
offers its services
directly or
indirectly in about
30 countries
around the world.
La Meccanica, with 50 years of experience in manufacturing machinery for the production of
animal feed pellets and over 15 years of experience in machinery for the production of sawdust
and biomass pellets for green energy, today provides an integrated service for the customer,
supplying machines, lines, spare parts and consumables for all the leading manufacturers of
pellet mills.
4. 6 7
Our mission
is to help resolve
environmental
problems.
MISSION
Our mission is to help resolve environmental problems by
- providing added value for your waste
- obtaining green energy from agricultural and industrial residues, and also from
short-cycle cultivation
- contributing to sustainable development
- supporting the customer’s growth. The strength of our technical solutions along
with the ability to meet our customers’ requirements are the main reasons for
the increase in the number of plants and machines supplied, as well as in the
increase in supplies of spare parts and consumables to pellet manufacturers.
Our attention is focused on maximizing customer profits by
- adapting lines and plants to the customer’s requirements
- providing simple and reliable solutions for complex technological problems
- coordinating the technical engineering of the plant with our technological
partners
- supplying consumables and spare parts for the world’s largest pellet mill
manufacturers.
Our company offers its customers
- a customer care division
- an engineering division
- modern manufacturing support.
Our
attention is
focused on
maximizing
customer
profits.
5. 8 9
ENGINEERING DIVISION
Organized to ensure an efficient response for customers who require processing
machines and/or complete lines conform to European standards, also in terms of
safety, for the production of Wood Pellets and/or Agro Pellets.
Offering customers:
- technical advice to define an optimal solution in relation to customer requirements,
raw materials, the final product and local technical and environmental
conditions;
- financial advice on possible funding for the investment;
- general and detailed designs for installing the production line in the available
space;
- simple and reliable solutions to complex technological problems;
- coordinated technical construction of the plant with the technological partners
involved in the supply;
- supervision of the assembly, mounting, startup and testing of the supplied
machines and/or lines;
- training customer’s staff.
Based on:
- a design office with staff specializing in plant analysis, machine design and
drawing up the technical documentation required by EU standards or providing
staff training;
- in-house production manufacturing all the main mechanical components with fully
computerized control of each production phase;
- an in-house assembly department that preassembles the steel-structural work of
the machines to guarantee they conform to standards;
- a quality control service on all phases, from provisioning of raw-materials to the
finished product, with an in-house quality-control laboratory for materials and
heat treatments;
- a group of specialized service technicians supervising the fitting and startup of
machines and/or plants;
- a fast service for handling inquiries and making quotations.
CUSTOMER CARE DIVISION
Structured to guarantee customers receive optimal:
- technical advice on dies also in relation to raw materials;
- supplies of consumables – dies – rollers – liners for all leading brands;
- complete maintenance of dies and rollers, including a collection and redelivery
service in some countries.
This service is based on:
- a production structure able to manufacture more than 2,000 dies/year for any
type of mill, with fully computerized control of all production stages. Manufacturing
dies, rollers and machinery has let us acquire exceptional competence and know-
how in the behaviour of various raw materials during processing.
- a quality assurance service covering the entire process from provisioning raw
materials to the finished product, with an in-house quality control laboratory for
materials and heat treatments;
- a roller and die maintenance service with specific departments at the Cittadella
(Italy) headquarters as well as in other countries, including a collection and
redelivery service in suitable conditions;
- a technical customer care service with specialists ready to operate on the
customer’s premises;
- a free service with technicians for setting up dies during the testing phase;
- a fast service for processing requests, from making the offer to filling the order.
La
Meccanica
is organized
to ensure
an efficient
response for
customers.
Customer
Care Division
is based on
a production
structure able
to manufacture
more than
2,000 dies/year.
6. 10 11
Supplier of quality machinery and know how
Based on more than 50 years’ experience, La Meccanica has
developed a range of industrial scale machinery for processing
of biomass, e.g. wood pellets for fuel.
The raw material usually consists of waste products from the
woodworking industry, saw mills, furniture factories etc.
La Meccanica machinery equipment for biomass has been
designed to the function and strength especially required for
these products.
Processing of biomass for fuel.
1
2
3
4
5
6
7
8
9
10
11
suction hopper
hammer mill mm340
suction hopper
hammer mill mm340
blower
cyclon with rotary valve
blower
cyclon with rotary
screw conveyor for pellet mill loading
screw conveyor for pellet mill loading
screw conveyor for pellet mill loading
12
13
14
15
16
17
18
19
20
21
22
screw conveyor for pellet mill loading
screw conveyor for pellet mill loading
screw conveyor for pellet mill loading
screw conveyor for pellet mill loading
screw conveyor for pellet mill loading
hopper for pellet mill loading
pellet mill
hopper for pellet mill loading
pellet mill
hopper for pellet mill loading
pellet mill
23
24
25
26
27
28
29
30
31
32
33
hopper for pellet mill loading
pellet mill
chain conveyor
bucket elevator
rotary valve
counterflow cooler
silo
cyclon with rotary valve
blower
screw conveyor
bucket elevator
34
35
36
37
38
39
40
41
42
43
44
vibrating screen
two way deviator
belt conveyor
bucket elevator
two way deviator
screw conveyor 1
silo for saw dust
rotary valve
silo for saw dust
rotary valve
screw conveyor 2
Pellet Mill Counterflow
Cooler
TO PACKING
MACHINE
TO BIG-BAG
TO SILO OF PELLET
TO RECYCLING
DUST SYSTEM
TO RECYCLING
DUST SYSTEM
TO RECYCLING
DUST SYSTEM
FROM SILO
OF DRYED MATERIAL
1
3
2
4
6
8
7
18
17
20
19
22
21
24
23
11
12
9
10
15
16
13
14
25
26 27
28
32
31
33
34
35
36
37
38
39
30
40
41
42
43
29
5
44
FROM SILO
OF DRYED MATERIAL
TO SILO OF PELLET
TO RECYCLING DUST SYSTEM
Hammer Mill
MM340
Silo for
saw dust
Vibrating
Screen
Bucket
Elevator
7. 12 13
With the
combination of quality
machinery, process
know how and
general experience
in the project supply,
we offer optimum
solutions within
grinding and pelleting
of any kind of
biomass.
Machinery
and
production
plants
8. 14 15
A A
471 21
2200 2140 350
530
476
650
256 1420 780
2518268
1028
190
404
12243 1030
965663
Flange A
A
2140
1240
1420 1155
158158158
Ø12
144 144 144 144 144
404
524
650
770
900
Pelleting
The La Meccanica
pellet mills ensures high
output and efficient
control of the pellet
quality. The pellet
mill are dimensioned
for large forces
and designed with
exchangeable wear
parts. Efficient process
control results in large
flexibility and optimum
energy utilization.
9. 16 17
All conveyors and processing equipment are made of
corrosion resistant steel to withstand i.a. tannic acid
liberated from the heated wood. The process line is
working with underpressure to minimize dust escape
and improve the working environment.
Flange A
A
A
A
471 21
2200 2140 350
530
476
1688
2140
1240
1420
183
1523
650
256 1420 780
2518268
1028
1155
1445 2200 190.5
190
158158158
Ø12
144 144 144 144 144
404
524650
770
404
12243 1030
900
965663
Wear resistant
and environment
friendly equipment.
10. 18 19
Not every pellet mill is suitable for producing biomass
or wood pellets of a sufficient density.
The facts are that learning how to make wood pellets
requires a lot more knowledge and skill than many
people realize.
The skill and
the knowledge.
11. 20 21
There are many factors, which are all required
before quality biomass pellet production can
take place. It requires the right pellet mill, and
the pellet mill to be set-up correctly. It requires
a biomass raw material, which is prepared
correctly to produce pellets.
Flange A
A
A
Machine type
t mill CLM 630.N with die 630.200
S.R.L.
ditioner M500E.2310
er C245E.1073
DI REFFO
C630N.000.0
Drawing:
Rev.:
00
A
471 21
2200 2140 350
530
476
2140
1240
1420
183 650
256 1420 780
2518268
1155
1445 2200 190.5
190
158158158
Ø12
144 144 144 144 144
404
524
650
770
404
12243 1030
900
Making biomass pellets is a highly skilled
process, it requires the right equipment
and knowledge of how to operate a
pellet mill to produce pellets.
Each raw material is different, a good
knowledge is critical on how to adjust the
moisture, particle size and homogeneity.
12. 22 23
Flange A
A
471 21
2200 2140 350
530
476
2140
1240
183
256 1420 780
251826
1445 2200 190.5
190
158158158
Ø12
144 144 144 144 144
404
524
650
770
12243 1030
900
Which biomass
can be processed in a
Pellet Mill?
Practically any biomass
material can be
processed into fuel
pellets. For example:
Wood, Switchgrass,
Miscanthus (also called
“elephant grass”),
Hemp, Bamboo, Straw
or any one of the many
potential energy crops.
13. 24 25
Flange A
A
A
Macchina - Machine type
Pellet mill CLM 630.N with die 630.200
S.R.L.
Conditioner M500E.2310
Feeder C245E.1073
DI REFFO
C630N.000.0
Drawing:
Rev
0
A
471 21
2200 2140 350
530
476
1688
2140
1240
1420
183
1523
2718
650
256 1420 780
2518268
1028
1155
1445 2200 190.5
190
158158158
Ø12
144 144 144 144 144
650
770
404
12243 1030
900
965663
Where does it come from? Bio mass blends are
all around us. Residential, commercial, industrial
and agricultural wastes can be used to produce
bio pellets.
14. 26
USA: wood pelleting plant – pre-pelleting bin for saw dust.
USA: storage section for pellets.
Practically any biomass material can be processed into fuel pellets. For
example: Wood, Switchgrass, Miscanthus (also called “elephant grass),
Hemp, Bamboo, Straw or any one of the many potential energy crops.
15. 27
Romania: wood pelleting plant – pre-pelleting bin for saw dust.
France: pelleting line under construction.
Hungary: storage section for pellets.
16. 28
USA: wood pelleting plant – pelleting line with capacity of 7 t/h.
USA: wood pelleting plant – pneumatic line for transport the saw dust
to the pelleting line.
Romania: wood pelleting plant – pelleting line with capacity of 9-10 t/h.
Romania: wood pelleting plant – milling line for wood chips – capacity
10 ton/h.
17. 29
Italy: cooling section for wood pellets – capacity 8 t/h.
Italy: wood pelleting plant – pelleting line – capacity 2 t/h.
Belgium: pelleting line – capacity 6-7 t/h.
Belgium: milling section for wood chips – capacity 8 t/h.
18.
19. LA MECCANICA SRL DI REFFO
administration and production: via nicolini, 1
loc. facca - 35013 cittadella - pd - italy
tel: +39 049 9419000 - fax: +39 049 5972171
lameccanica@lameccanica.it
www.lameccanica.it