We are manufacturers of cement autoclaves in India since 1990. Our cement autoclaves are widely used for analyzing estimated delayed expansion of Portland cement. Which is caused due hydration reaction of calcium oxide and magnesium oxide. For More Information Please Logon http://goo.gl/byU61L
Senstation pH/ORP Measurement Solution - A scalable, integrated system that i...Yokogawa
SENSTATION from Yokogawa is a new concept that combines the company’s SENCOM smart sensors with the SMART data logger and SMARTDAC+ modular data-acquisition system to provide a scalable integrated pH measurement solution
The SMARTDAC+ series is a simple and flexible data acquisition control system designed for ease of use in a variety of ways to provide an ideal operating experience for the user.
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
We are manufacturers of cement autoclaves in India since 1990. Our cement autoclaves are widely used for analyzing estimated delayed expansion of Portland cement. Which is caused due hydration reaction of calcium oxide and magnesium oxide. For More Information Please Logon http://goo.gl/byU61L
Senstation pH/ORP Measurement Solution - A scalable, integrated system that i...Yokogawa
SENSTATION from Yokogawa is a new concept that combines the company’s SENCOM smart sensors with the SMART data logger and SMARTDAC+ modular data-acquisition system to provide a scalable integrated pH measurement solution
The SMARTDAC+ series is a simple and flexible data acquisition control system designed for ease of use in a variety of ways to provide an ideal operating experience for the user.
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
We are manufacturers of rectangular vacuum oven, vacuum ovens India, vacuum oven suppliers Delhi, vacuum oven manufacturers Delhi, vacuum ovens exporter, rectangular vacuum oven exporters, vacuum oven supplier India, vacuum ovens India. For More Information Please Logon http://cutt.us/6ReQm
We are manufacturers of blood bank refrigerators in India
since last two decades. Our blood bank refrigerators are
conceptualized and designed to meet the challenging
requiremtns of modern day blood banks to efficiently
conserve whole blood and its derivatives beside variety of
other products such as vaccines, primers, culture media etc.
We strongly believe in the principle of quality first and
everything else to follow, which reflects in our products,
which are renowned for long touble free services in various
blood banks, hospitals and research institutes across India
and abroad.
Mitsubishi ac servos melservo solutions dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Suyog Engineers take this opportunity in introducing ourselves as a manufacturing and trading company based in Pune, Maharashtra, India. The company is established to serve the different types of products to battery industries. We are submitting the Introduction along with product details.
S-8800 lead-free reflow oven is Southern Machinery‘s mature product after many years of market testing.S-8800 Reflow oven has maintained a larger share of the market for many years.
Its unparalleled heating performance and temperature control system meets the requirements of various welding processes, It is Southern Machinery ’s crystallization of years technical research and development. S-8800 Lead-free reflow is high-end reflow products committed to keeping up with market demand to enhance customers competitiveness.
Its new design concept fully meets the needs of increasingly diverse processes, and considering the future direction of the industry, entirely suitable for communications, automotive electronics, home appliances, computers and other consumer electronic products .
We are manufacturers of <b>humidity control cabinets, temperature control cabinets</b> in India since last two decades. Our <b>temperature and humidity control cabinets</b> are conceptualized and designed to create test chambers to study and contemplate the effects of different environmental parameters such as humidity, temperature applications tests involving micro-organisms, plants, tissues, electronic components etc. apart from various customized industrial and research applications. Our <b>temperature control cabinets</b> and <b>humidity control cabinets</b> have a variety of usage in R and D laboratories, research studies and product testing facilities across the globe. Apart from that, these temperature and humidity control cabinets have a variety of usages in tissue culture applications, enzyme reaction studies, growth For more information please logon http://cutt.us/EhCD
We are manufacturers of rectangular vacuum oven, vacuum ovens India, vacuum oven suppliers Delhi, vacuum oven manufacturers Delhi, vacuum ovens exporter, rectangular vacuum oven exporters, vacuum oven supplier India, vacuum ovens India. For More Information Please Logon http://cutt.us/6ReQm
We are manufacturers of blood bank refrigerators in India
since last two decades. Our blood bank refrigerators are
conceptualized and designed to meet the challenging
requiremtns of modern day blood banks to efficiently
conserve whole blood and its derivatives beside variety of
other products such as vaccines, primers, culture media etc.
We strongly believe in the principle of quality first and
everything else to follow, which reflects in our products,
which are renowned for long touble free services in various
blood banks, hospitals and research institutes across India
and abroad.
Mitsubishi ac servos melservo solutions dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Suyog Engineers take this opportunity in introducing ourselves as a manufacturing and trading company based in Pune, Maharashtra, India. The company is established to serve the different types of products to battery industries. We are submitting the Introduction along with product details.
S-8800 lead-free reflow oven is Southern Machinery‘s mature product after many years of market testing.S-8800 Reflow oven has maintained a larger share of the market for many years.
Its unparalleled heating performance and temperature control system meets the requirements of various welding processes, It is Southern Machinery ’s crystallization of years technical research and development. S-8800 Lead-free reflow is high-end reflow products committed to keeping up with market demand to enhance customers competitiveness.
Its new design concept fully meets the needs of increasingly diverse processes, and considering the future direction of the industry, entirely suitable for communications, automotive electronics, home appliances, computers and other consumer electronic products .
We are manufacturers of <b>humidity control cabinets, temperature control cabinets</b> in India since last two decades. Our <b>temperature and humidity control cabinets</b> are conceptualized and designed to create test chambers to study and contemplate the effects of different environmental parameters such as humidity, temperature applications tests involving micro-organisms, plants, tissues, electronic components etc. apart from various customized industrial and research applications. Our <b>temperature control cabinets</b> and <b>humidity control cabinets</b> have a variety of usage in R and D laboratories, research studies and product testing facilities across the globe. Apart from that, these temperature and humidity control cabinets have a variety of usages in tissue culture applications, enzyme reaction studies, growth For more information please logon http://cutt.us/EhCD
We are manufacturers of Autoclaves, vertical autoclaves India since 1990. Our vertical autoclaves are widely used for day to day sterilization procedures and in various laboratory applications. For more information please log on http://cutt.us/wnr5
This document was prepared by Zenithar Team to show the machinery support portfolio in the electromechanical industry. For switchgears, for transformers, for epoxy resin casting, for molding, and for CT, PT solutions, Zenithar is a convenient partner to help the right machinery solutions.
The Leistritz Polymat and Polyjet series of machines are employed in just about every branch.
Our design and manufacture specialists work constantly to advance our technologies.
We have continuously improved our profile and keyseating technology over many decades to deliver the highest quality from one source. - Advantages
The keyseating process cuts a keyway in stepwise manner. A cutter is pulled vertically with a continual stroke movement along the bore, combined with a horizontal thrust motion. The thrust is delivered after each stroke by a feed bar that thrusts the cutter in steps between the cutter guide bar and cutter bar. To ensure gentle machining for the tool and workpiece, the cutter is automatically lifted off before the upward movement. The keyseating machines are equipped with a twin-column hydraulic guidance system. The in-line arrangement of tool and tool slide creates a fully linear alignment of forces within the tool and machine system. This avoids lateral forces and leverage, so that the machine is extremely long-lasting and virtually free of wear.
Concrete block machines - Block making machinery
The Compacta machines and installations, manufactured by Prensoland since 1950, have been recognized worldwide for their robust construction and excellent quality of finished products.
Continuing our tradition, our equipment incorporates the latest technology to the highest standard enabling high production levels, excellent product quality to exceed market demands and with the advantage that our equipment requires a minimum of maintenance.
A wide range of possibilities are available, from a simple production plant to a fully automated circuit to supply a vast market.We can offer our Customers all types of solutions and automatic equipment to reduce to the minimum labour costs/workforce. This website shows our range of Compacta plants, comprising of various models of static Vibro-presses as well as Autocompacta block laying machines.
We continue working and investigating to improve our equipment, offering solutions to be at the forefront of progress and meet all the needs for our Clients in their respective markets.
Further information: http://www.prensoland.com
3d printer electronics engineering live projects abstracts @1000KV Technologi...1000kv technologies
electronics engineering live projects abstracts
electronics projects, electronics projects for engineering final year students, electronics and communication engineering projects for final year students,100kv,1000kv,1000kv technologies,1000kv projects,technologies,live projects,Hyderabad live projects,live projects in, diploma low cost projects,1000kv projects, , academic projects,btech live projects,Hyderabad,1000kilovolts,1000kilovolts technologies ,btech main projects ,
This is a business presentation from Ristatti Instruments from Italy. We design, develop and build electrical and electromechanical taylor made testing machines.
Get in touch with us to know more.
www.risatti.it
We are manufacturers of horizontal autoclave, triple walled horizontal autoclave India since 1990. Our horizontal autoclaves are widely used for day to day mass scale sterilization procedures and in various bulk laboratory applications . For more information please log on http://cutt.us/SZ7Mr
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
3. TECNODINAMICA design and construct machines and
plants for the processing of Expanded Polystyrene (EPS)
taking advantage of their consolidated experience matured in
the designing and production of industrial automation.
The solidity of the mechanical structures featuring all models,
guarantees a long working life.
All components installed, both mechanical and electronic, are
carefully selected for their reliability and high technological
content. This assures the customer a high-quality product
both in terms of performance and safety.
The range of machines offers different cutting solutions:
Contour cutters, Slicing machines, Down cutters,
Scooping machines, Milling machines, Recycling plants,
Automatic cutting lines, Pre-expanders and Complete
Turn-key plants for block production.
The production by the TECNODINAMICA machines such as
profiles and sheets does meet all reequirements of different
branches like the packaging, the decoration and the building
industry.
TECNODINAMICA - 1
4. PRE-EXPANDER
The process for the production of an EPS
block starts from an efficiently working preexpansion system. The new
TECNODINAMICA batch pre-expanders ,
fully automatic, have been designed to
improve the uniformity of the pre-expanded
foam material and to reduce the cycle
times. Our aim is to get a most advanced
process of treatment of expanded beads
thus obtaining higher uniformity and
density of raw material at each cycle.
The TECNODINAMICA batch pre-expanders
allow to get the required density without
TD940D
DEVICE WHICH MEASURES AND
CHECKS AUTOMATICALLY THE
DENSITY
2 - TECNODINAMICA
2 - TECNODINAMICA
DELUMPER WITH MIXER
any waste of material and to reach very
low densities by means of one single
expansion. Every single cycle of expansion
is monitored by an automatic density
control device which guarantees the
absolute repeatability of the cycles.
The standard configuration of the
TECNODINAMICA batch pre-expanders
includes: pre-expander with electronic
control-board, PC and touch-screen,
electronic load-cell of feeding material, raw
material feeder, fluidized bed-dryer,
delumper and density check system.
5. The inclined pre-expanders TD900 have been designed to obtain low densities (8÷10 gr/ltr)
through second or third expansion and are composed of:
• Stainless steel expansion chamber
• Stainless steel mixer shaft with set speed ratio motor
• Variable-speed auger for introducing material from first expansion
• Electromechanical control panel
• Fluidised bed complete with material conveying system by Venturi
• Fan for drying expanded material
• Fan for sending material to silos
TD900
TECNODINAMICA - 3 . 3
TECNODINAMICA
PRE-EXPANDERS
INCLINED SECOND EXPANSION PRE-EXPANDER
6. BLOCK MOULDERS
Our vertical block moulders are designed
for the automatic production of 'EPS'
Expanded Polystyrene blocks. The moulds
can produce blocks of 100% raw EPS
material, at a density range from min. 8
gr/ltr to max. 60 gr/ltr or blocks with a
variable content of recycled EPS.
The complete range includes models with
fixed or variable depths and heights and
different features according to the final
SOFTWARE
This software enables control of the block
moulder and all the parts connected to it, such
as for example the vacuum plant, loading silos,
block weighing and unloading devices, etc.
Using names and passwords, customised for
the various users, the programme defines the
level of access to the various operations in
order to simplify work during normal production
and make the greatest amount of information
accessible during control and setting
procedures.
The multiple windows enable the production of
EPS blocks to be managed in the best way
possible, controlling pressure, reaction and
temperature values of the material in real-time
and organising all the timings and working
parameters by means of complete control of
the recipes.
The programme enables sintering to be
controlled by creating process graphs which
chronologically plot the historic file of events
and enable, if necessary, former processing to
be recovered together with the associated data
and diagrams.
A broad configuration allows the machine
parameters to be set in order to perfect the
production of blocks as far as possible under
any conditions and with different qualities of
raw materials.
The supervision programme constantly files
away a calendar of events and diagnostic
messages making access to the information
these contain possible at any time.
A manual control section allows all controls on
the block moulder to be carried out easily and
at the same time interventions to be made
during operation to interrupt or complete the
production of a block.
4 . TECNODINAMICA
4 - TECNODINAMICA
TD40100 . BLOCK MOULDER
customer's requirements.
Our block moulders can be equipped with
accessories such as :
•Vacuum plant
•Pre-feeding Silo
•Automatic density control
•Simple block discharge chain
•Unloading device with block magazine
•Insert for block height reduction
•Thermal label printer
7. BLOCK MOULDERS
PRE-FEEDING SILO WITH AIR
FILTERING
UNLOADING DEVICE AND
BLOCK MAGAZINE
VACUUM PLANT
TD4060 . BLOCK MOULDER
TECNODINAMICA - 5 . 5
TECNODINAMICA
8. AUTOMATIC CUTTING LINES
Our cutting lines are designed and
produced according to the specific
customer's requirements, the type of work
to be performed and the size of block to
be processed.
They are suitable for a high production
volumes and for high level of accuracy in
processing EPS sheets.
They can be supplied including various
options: block magazine, automatic block
tilter, cutting stations with stationary or
oscillating wires, automatic or manual
wire setting, automatic scrap removal on
all sides, de-stacking and marking
stations.
The electrical and mechanical
construction features comply with safety
standards in force and the CE mark.
SOFTWARE
As applications in polystyrene evolve, so the
need to cope with ever faster and more
particular production requirements increases.
Automatic cutting lines are carefully studied
to suit the needs of the user, therefore the
management software also needs to be
customised so that it is simple and at the
same time reliable.
Tecnodinamica create their own programmes
in order to interface the user with cuttingedge and innovative solutions, so they can
easily update customised requests and
facilitate maintenance with specific diagnostic
controls.
There are common features which simplify
the management of lines which are bulky and
complex for the user, for example:
•Storable work cards for repetitive
production;
•Tables for automatically checking regulation
(such as cutting speed, temperature and
wire burning corrections) depending on the
density of the material;
•Programmable block count;
•A broad range of possibilities to configure
technical parameters and flexibility in
enabling parts to optimise performance;
•Specific diagnostics for signal control able
to create an historic file of processing
events for each section of the machine;
•Connection to remote servicing.
A graphic interface allows the operator to
have immediate control over the processes
taking place in the workstations.
6 . TECNODINAMICA
6 - TECNODINAMICA
Block magazine and tilter.
Block aligning system.
9. AUTOMATIC CUTTING LINES
Frame with oscillating
wires
Bottom scrap removal
Adjustable roller bed and scrap collection
Cross cutter with side pushing table
TD1000 . AUTOMATIC CUTTING LINE
TECNODINAMICA - 7 . 7
TECNODINAMICA
10. CONTOUR CUTTERS
Our multi-wire computer-controlled
contour cutters are suitable for
manufacturing profiles for packaging,
window display and insulation.
The range includes more than 60 models
in the following versions: on fixed table,
on belt, 2 - 3 and 5 axes, with manual or
automatic wire setting systems. Cutting
widths range from 1000 to 4000 mm.
Belt models can be equipped with a
number of accessories such as:
• Vertical cutting station
• Downcutting station
• Scrap removal
• Automatic loading and unloading
devices
The electrical and mechanical
construction features comply with safety
standards in force and the CE mark.
TD115 . CONTOUR CUTTER ON FIXED TABLE
SOFTWARE
This software enables the profile design project
to be easily managed and Tecnodinamica
contour cutters to be immediately controlled
(both those on fixed tables and on belts, with
automatic or manual wire positioner).
In particular, the Project drawing programme
allows profiles to be created by means of an
intuitive graphic interface. It provides a wide
range of possibilities for managing and
controlling any design element, configuring for
these different working parameters such as
Speed and Pause at every point of the profile.
8 . TECNODINAMICA
TD120A . CONTOUR CUTTER ON FIXED TABLE WITH AUTOMATIC SETTING
11. CONTOUR CUTTERS
TD370 . CONTOUR CUTTER ON BELT
TD370A . CONTOUR CUTTER ON BELT WITH AUTOMATIC SETTING
TD260A . 5 AXIS CONTOUR CUTTER WITH AUTOMATIC WIRE SETTING
TECNODINAMICA . 9
12. SLICING MACHINES
Our slicing machines are suitable for producing
plane and tapered sheets, in various thicknesses,
with a cutting accuracy of a tenth of a millimetre.
The range includes:
•Slicing machines with electronically tilting
interchangeable frames
•Computer-controlled slicing machines with
fixed or programmable inclination and
automatic wire setting
The computerized models are equipped with
an automatic system to regulate the cutting speed
SOFTWARE
In the case of machines with automatic wire
setting, software control enables the
thicknesses and quantities of sheets to be
obtained to be entered even with mixed sizes.
Cutting parameters such as Speed, Burning and
Temperature are managed automatically
according to the density of the material and can
be varied manually by the operator. The
accuracy of the wire setting guarantees a high
degree of precision in the measurements
obtained.
A system of wire tensioning sensors
automatically regulates the speed with
variations which can be customised.
All the production cards can be stored in the PC
and used subsequently.
The programme enables both parallel and
tapered sheet cuts to be made, cutting Speed
and Temperature to be programmed and these
values to be adjusted at any stage of the
processing.
A diagnostics page enables the operator to have
a detailed overview of the machine state and
possible events (for example: emergency and
thermal protection devices, wire ruptures, etc.).
The machine is supplied with a software
package and hardware for tele-servicing.
10 . TECNODINAMICA
by means of sensors which control wire
tensioning.
In case of one or more wires breaking, the
machines stop automatically.
All slicing machines can be equipped with
vertical cutting frames.
The electrical and mechanical construction
features comply with safety standards in force
and the CE mark.
14. DOWN CUTTERS
Our cross cutters are suitable for squaring
the blocks, preparing them for next processing
on other machines such as slicers, contour cutters
and scooping machines.
The range includes hot wire down cutters
having a working surface built on insulated bars,
cross cutters with belts and automatic wire setting.
All down cutters are equipped with automatic
wire breaking detector.
SOFTWARE
In the case of cross cutters with automatic wire
setting, software control enables dimensions
and the quantity of pieces to be obtained to be
entered, even with mixed sizes. Cutting
parameters such as Speed, Burning and
Temperature are controlled automatically
depending on the density of the material
though it is possible for the operator to modify
these manually.
A diagnostics procedure continually checks the
state of the machine and informs the user of
any events occurring during the processing
cycle. Cutting control is automated through the
use of “material present” photocells which
optimise the speeds and temperatures of block
cutting by switching on the cutting wires when
the block passes and moving the block being
processed at maximum speed during the
loading/unloading stages
12 . TECNODINAMICA
The electrical and mechanical construction
features comply with safety standards in force
and the CE mark.
15. DOWN CUTTERS
TD555 . DOWN CUTTER
TD550 . CROSS CUTTER ON BELTS
TD550AA .CROSS CUTTER WITH DOUBLE AUTOMATIC WIRE SETTING
TECNODINAMICA . 13
16. MILLING MACHINE
Our milling machines are also suitable for the production of pieces
with very complex shapes featuring excellent finishing and high
precision. These machines are suitable for the production of mould
prototypes or as an alternative to limited production quantities
which do not justify the construction of a mould.
The electrical and mechanical construction features comply with
safety standards in force and the CE mark.
Production is achieved by means of a high-speed milling electrospindle. Axis drives are controlled by Brushless motors which allow
very fast movements.
The machine is equipped with: a pneumatic feeder for the
SOFTWARE
The design programme enables profiles for the
scooping of boxes or sheets to be created. Movement
sequences with which the tool is associated and the
Speed and Depth required for cutting are to be
entered.
As well as making the design of simple scoops easier,
the software also integrates more complex design
controls which enable designed sequences to be
modified by transforming them using graphic and
mathematical functions.
A table enables the sequences of the project to be
associated with the basic features of the tools, such
as diameter, depth and rotation speed. This enables
speed and cutting precision to be optimised.
The processing programme controls the 3-axial
movement of the cutter, automatically changes over
the tool as envisaged in the design, configuring the
different rotation speeds of the tools and controls the
automatic sheet loading and unloading station
machining process when required.
14 . TECNODINAMICA
14 - TECNODINAMICA
automatic loading of pads to be processed, a milling tool magazine
(which stores up to 10 tools) which are automatically selected
during the processing cycle.
The machine is provided with an automatic feeler which detects the
length of tools in order to obtain maximum precision in the
processing dimensions.
The working table is divided into 5 vacuum areas with automatic
vacuum opening or closing selection according to the size of the
piece . Control is made by PC Software in which all profiles are
stored and can be selected at any time.
18. SCOOPING MACHINES
SOFTWARE
TD680E . ELECTRONIC SCOOPING MACHINE
The Project design programme produces the
cutting profiles for scooping machines by
controlling the XY (Vertical) and XZ
(Horizontal) movement planes and the
rotation of the head. The rotation can be
defined as a single rotary movement or
combined with the insertion of horizontal
movements to define a closed perimeter
scoop. The effect produced depends on the
movement and the shape the wire applied
was modelled to.
Simulation enables the regulation of different
speeds during the course plotted thereby
optimising the quality of cutting and
production times.
Specific controls make it easier to produce
the scoop project quickly and enable the
internal hollowing of the movement
perimeters to be studied according to the size
of the scoop wire envisaged.
The processing programme controls the
movements of the 3 axes on the cutter,
automatically inserting the rotation of the
head to produce the closed perimeter scoop.
Adjustable stops enable the initial wire
rotation angle to be defined.
The automatic processing cycle is
electronically controlled by means of a
keypad with wide visual display which
allows profiles to be edited and stored.
The machine is equipped with an
auxiliary motor which also enables
scooping of circular profiles and is
provided with an automatic feeder with
pneumatic loading and clamping of the
pads into position.
16 . TECNODINAMICA
19. SCOOPING MACHINES
TD680C3 . COMPUTER - CONTROLLED SCOOPING MACHINE
The COMPUTER-CONTROLLED model
(3 interpolated axes) combines circular with
horizontal movement in order to produce
special curved shapes. The automatic
processing cycle is controlled by PC.
CAD CAM Software for the programming and
the saving of customer listed profiles. The
machine is supplied with a motor which
enables the scooping of circular profiles and a
feeder with pneumatic loading and clamping
of pads into position.
TECNODINAMICA . 17
20. RECYCLING PLANTS
TD801 . GRANULATOR
The machine grinds Expanded Polystyrene
scraps into granulates which will be later
mixed with raw EPS material into the block
moulding or find an application in light
concrete.
It is supplied with pre-crusher and grinding
unit with knives and sieves for granulates.
Low noise level below the limits set by
legislation in force. Production capacity from
10 to 30m3/h according to density.
18 . TECNODINAMICA
21. RECYCLING PLANTS
TD860 . MIXING PLANT RAW-RECYCLED EPS
TD811 . GRANULATOR WITH SILO
The mixing unit is built on 2 coupled silos.
No. 2 steel augers are installed at the base, the rotation speed is electronically controlled by inverter and allows a dosing rate of material at the
desired percentage.
Granulator complete with silo in transpirant fabric,
built on a galvanized sheet metal hopper and iron
structure. Complete with accessories.
TD850 . DEDUSTER
Machine for dedusting polystyrene granulates ground
by the granulator.
The ground material is conveyed by a powered bristle
auger through a drilled cylinder with suction filter to
separate it from the dust.
In this way, the dedusted expanded polystyrene beads
are conveyed once again into a silo by means of a fan
while the dust is collected by a sleeve filter.
TECNODINAMICA . 19
22. PLANT ENGINEERING
Another field of specialization of Tecnodinamica is the engineering and
installation of turn-key plants for the production and handling of EPS blocks.
A staff of highly skilled technical engineers support the customers since the
initial project, then the start-up of the plant and training of the customer's
staff with the aim of fully satisfying the requirements both in production as
well as in the investment costs.
Tecnodinamica carefully studies the demands of one customer based on the
valuation of a property available and on the annual capacity requested in
order to offer the most cost-effective solution.
20 . TECNODINAMICA
23. PLANT ENGINEERING
CUTTING AREA
BLOCK PRODUCTION AREA
SILOS
RECYCLING PLANT
COLOURED BEADS PLANT
STEAM PLANT
COMPLETE WATER PLANT
PREEXPANSION AREA
TECNODINAMICA . 21