The document provides specifications for various pieces of construction equipment being used at a project site, including: 1. A Hyundai Robex 210LC-7 hydraulic excavator with a 5.9 liter 6-cylinder turbocharged engine producing 111.9 kW of power. 2. A Tata Hitachi EX200LC hydraulic excavator with a 6.5 liter 6-cylinder engine producing 99 kW of power. 3. A Fuwa QUY35 hydraulic crawler crane with a maximum lifting capacity of 35 tons and a maximum boom length of 46.25 meters.

1. PLANT AND
MACHINERY

2. HYDRAULIC EXCAVATOR
HYUNDAI ROBEX 210LC-7
 ENGINE SPECIFICATION
 Gross Power150 hp = 111.9 kW
 Net Power143 hp = 106.6 kW
 Power Measured @1950 rpm
 Displacement 359 cu inch = 5.9 Liter
 Torque Measured @1500 rpm
 Max Torque 453 lb ft = 614.2 Nm
 Aspiration - Turbocharged and Charge air cooled
 Number of Cylinders 6
 Operating Weight 51060 lb = 23160.4 kg
 Fuel Capacity 89.8 gal = 340 Liter
 Cooling System Fluid Capacity 9.2 gal = 35 Liter
 Hydraulic System Fluid Capacity 76.6 gal = 290 Liter
 Engine Oil Capacity6.3 gal = 24 Liter
 Swing Drive Fluid Capacity 1.3 gal = 5 Liter
 Operating Voltage 24 V
 Fuel (Diesel) consumption 15 lit/hr
 Boom/Stick Option

3.  Shipping Length of Unit 31.6 ft in 9640 mm
 Shipping Height of Unit 10.9 ft in 3320 mm
 Max Cutting Height 30.6 ft in 9330 mm
 Max Loading Height 21.4 ft in 6520 mm
 Max Reach Along Ground 29.3 ft in 8920 mm
 Max Vertical Wall Digging Depth 16.7 ft in 5090 mm
 Max Digging Depth 18.5 ft in 5630 mm
 Bucket capacity – 0.5 m3
 Dimensions
 Width to Outside of Tracks 11.1 ft in 3395 mm
 Length of Track on Ground 12 ft in 3650 mm
 Ground Clearance 2.2 ft in 660 mm
 Height to Top of Cab 10.2 ft in 3100 mm
 Tail Swing Radius 9.3 ft in 2830 mm
 Counterweight Clearance 4.1 ft in 1260 mm
 Undercarriage
 Track Gauge 9.2 ft in 2795 mm
 Shoe Size 23.6 in 600 mm
 RENT – Rs. 2200 Per hour

5. Hydraulic Excavator (HYUNDAI Robex 210LC-7)

6. OTHER HYDRAULIC EXCAVATOR USED IN THE PROJECT SITE:
TATA HITACHI EX200 LC
 Engine Specification
 Gross Power 132.8 hp = 99 kW
 Power Measured @1950 rpm
 Displacement 396.3 cu in = 6.5 Lit
 Torque Measured @1600 rpm
 Max Torque340 lb ft = 461 Nm
 Number of Cylinders 6
 Operating Weight 20,000 kg
 Bucket Capacity 0.8 m3
 Fuel (Diesel) consumption 18 liter/hr
 Boom/Stick Option
 Max Cutting Height 30.1 ft in 9170 mm
 Max Loading Height 21 ft in 6390 mm
 Max Reach Along Ground 29.8 ft in 9080 mm
 Max Vertical Wall Digging Depth 16.9 ft in 5140 mm
 Max Digging Depth 19.6 ft in 5980mm
 Dimensions
 Width to Outside of Tracks 9.8 ft in 2990 mm
 Length of Track on Ground 12 ft in 3660 mm
 Ground Clearance 1.5 ft in 450 mm
 Height to Top of Cab 9.4 ft in 2870 mm
 Tail Swing Radius 8.9 ft in 2720 mm
 Counterweight Clearance 3.4 ft in 1030 mm

7.  Undercarriage
 Track Gauge 7.8 ft in 2390 mm
 Shoe Size 23.6 in 600 mm
 Rent Rs. 2500 per hour
Hydraulic Excavator (TATA HITACHI EX200i LC)

8. HYDRAULIC CRAWLER CRANE
Fuwa QUY35
 Max. Rated Lifting Capacity – 35T
 Main Boom Length – 10 - 40m
 Fly Jib Length – 6.1m - 15.25m
 Max. Boom Length with Fly Jib – (31 + 15.25)m
 Main Boom Angle – 30 - 80 Deg.
 Hook Blocks (optional) – 35/15/6T
 Main Winch Hoist, lower (rope dia 20) – High 62 / Low 31 m/min
 Aux. Winch Hoist, lower (rope dia 20) – High 62 / Low 31 m/min
 Boom Rise (rope dia 20) – 64 m/min
 Swing Speed – 3.7 r/min
 Travel Speed – 1.34 km/h
 Main Hoist Reevings – 7
 Single Rope Lifting Capacity – 5.7 T
 Engine – 128 kW (Domestic) @ 2000 rpm
 Swing Radius – 3800 mm
 Overall Dimension – 6350x3100x3020
 Crane Mass (with basic boom, 35T Hook) – 38T
 Ground Bearing Pressure – 0.054 MPa
 Counterweight – 12.1T

9. Working radius of the standard boom of Fuwa QUY35

10. Standard dimensions of Fuwa QUY35

11. MECHANICAL CRAWLER CRANE
75 TON CAPACITY TATA 955ALC CRAWLER
MOUNTED MOBILE CRANE
 Capacity – 75 Ton at basic boom length 15.24m and radius 3.67m
 Safe working load – 3.695 Ton at boom length 30.49m and radius
27.43m
 Tested load – 4.51 Ton at boom length 30.49m and radius 24.38m
 Hoist Rope Dia. – 24.6mm at 4 falls
 Guy rope Dia. – 34mm
 Boom rope Dia. – 18mm
 Triple sheave pulley & load hook fitted
 Fuel (Diesel) consumption 18 liter/hr
 Rent – 3.5 lakh per month (260 hours ie. 26 days 10 hrs each)
[excluding Diesel]
VIBRO-HAMMER
 Hammer weight – 4.5 Ton
 Hammering operation type – Impact loading
 Power generated by – Power pack
 Fuel (Diesel) consumption of the power pack – 20 liter/hr

12.  Rent – 4 lakh per month (260 hrs ie. 26 days 10 hrs each)
[excluding Diesel]
 Time required for one complete cycle of sheet piling using
Mechanical crane and Vibro-Hammer – 25 minutes
75Ton mechanical crane holding the vibro-hammer for shit piling
operation.

13. TYRE MOUNTED MOBILE CRANE
ESCORTS F-15
 Maxm
capacity – 15 Ton at fully retracted boom and radius of
1.5m
 Safe working load – 2.13 Ton at boom length 12 m & radius 9m
 Tasted load – 2.5 Ton at boom length 12m & radius 9m
 Wire rope Dia. – 12mm at 4 falls
 Load hook jaw – 75.0mm
 Shank – 50mm
 Diesel engine, turbo charged, water cooled
 Engine power – 101 HP @ 2400rpm
 Maxm
hook height – 17.6m

14.  Boom length with fly jib – 21m
 4 part boom: 3part hydraulically controlled and fully
synchronized, 4th
part power extended & manually pinned for
safety.
 Operating weight – 15315kg
VIBRATORY COMPACTORS
L&T CASE 450DX
Engine Mahindra Industrial
Engine Cooling Water Cooled
Horse Power 45 HP @ 2300 rpm
Operating Weight 3225 Kg

15. Vibratory Single Drum Roller Compactor
 Engine power – 4.8HP @3000rpm
 Force exerted – 12 kN
 Suitable for corner edges and Small turning radius
 Net weight – 315kg
 Walk speed – 0-3 km/h
 Climbing capacity – 30%
 Drive – Hydraulic Station
TOTAL STATION
SOKKIA GPO-006
 Horizontal range 1km
 Prism stick length – 2m maxm
height adjustable

17. fig: TARGET
fig: PRISM STICK

18. CONCRETE PUMP
SCHWING STETTER SP1400 DI
Parameters Unit
Diesel
Version
Technical Parameter 1215
Engine / Motor Capacity kW 48.6
Nominal speed min -
¹ 2100
Pumping Cylinder Ø x Stroke mm
180 x
1400
Pumping Cylinder Volume liter 35.63
Differential Cylinders, Ø x Stroke mm
100 /
60
x1400
Noise pollution level dB 123
Max. No. of Strokes per min 16
Max. theor Concrete Output m³/h 34
Max. Concrete pressure
SP1400 bar 99
Capacity of Charging Hopper liter 400
Dead Weight incl.oil and Fuel kg 4000
Delivery line Ø up to mm 150

19. All dimensions are in mm
SCHWING STETTER SP1400 DI

20. Transit Mixer
TM-7
Truck Mixer Model Unit AM 6 FHC AM 6 SHC AM 6 SHC2 AM 6 SHN
Drive via truck FH SH SH SH
Nominal Filling capacity Liters 6000 6000 6000 6000
Total Geometric Volume Liters 11700 11700 11700 11700
Volume Liters 7100 7100 7200 7100
Filling Ratio % 59 59 62 59
Prime mover Power KW 51 51 52 51
Drum Speed Min-1
0-12 0-12 0-12 0-12

21. SKID STEER LOADER
L&T BOBCAT HEMAN
 Engine power – 60HP
 Capacity – 750kg