Physical quantities and their units
•
1 like•1,375 views
This document defines many fundamental physical quantities used across various domains of physics including mechanics, rotational mechanics, thermodynamics, and electromagnetism. It provides the name, definition, formula, units, and dimensions for quantities such as length, time, mass, velocity, acceleration, force, energy, charge, current, voltage, and others. It also notes that mass, energy, momentum, angular momentum, and charge are conserved in isolated systems according to physics conventions.
Report
Share
Report
Share
Download to read offline
Recommended
Shaft & Torsion
Text book for the mechanics of materials
Shaft & Torsion
・Angle of Torsion & Specific Angle of Torsion
・Stress & Strain under Torque
・Design of Shaft Diameter
Note: Your feedback is welcome!
Torsion testing experiment (instructor)
The document describes a torsion testing experiment. The objectives are to:
1. Determine the shear modulus (G) of different materials and the relationship between applied torque and angular twist.
2. Examine how material length affects angular twist.
The experiment involves twisting steel and brass rods of different lengths using known torques and measuring the angular deflection. Graphs of the data are used to calculate G, finding values of 68.46 GPa for steel and 38.8 GPa for brass, which are close to reference values. Testing another brass rod of varying lengths, a graph shows angular twist increases proportionally with length. G is recalculated from this graph as 43.50 GPa
Material Science Chapter 4
There are several types of defects that can arise in solids, including point defects like vacancies and interstitials, line defects like dislocations, and area defects like grain boundaries. The number and type of defects can be controlled through processing parameters and affect the material properties. While some defects are undesirable, others can play important roles like enabling plastic deformation through dislocation motion. Advanced microscopy techniques allow direct imaging of these defect structures at atomic scales.
Theory and Design for Mechanical Measurements solutions manual Figliola 4th ed
Figliola and Beasley’s 6th edition of Theory and Design for Mechanical Measurements provides a time-tested and respected approach to the theory of engineering measurements. An emphasis on the role of statistics and uncertainty analysis in the measuring process makes this text unique. While the measurements discipline is very broad, careful selection of topical coverage, establishes the physical principles and practical techniques for quantifying many engineering variables that have multiple engineering applications.
In the sixth edition, Theory and Design for Mechanical Measurements continues to emphasize the conceptual design framework for selecting and specifying equipment, test procedures and interpreting test results. Coverage of topics, applications and devices has been updated—including information on data acquisition hardware and communication protocols, infrared imaging, and microphones. New examples that illustrate either case studies or interesting vignettes related to the application of measurements in current practice are introduced.
Mechanics ppt 1
This document provides an overview of key kinematic concepts in mechanics and IB Physics including:
- Scalar and vector quantities as well as the differences between distance, displacement, speed, and velocity.
- Definitions and equations for rest, motion, acceleration, and projectile motion.
- Graphs showing relationships between position, velocity, and acceleration over time and how to calculate changes in position from these graphs.
- Key equations of motion including the SUVAT equations that can be used when acceleration is constant.
Compression test verification_for_a_wood
Experiment NO:6 describes a compression test performed on an anisotropic wooden material to determine its compressive strength when force is applied both parallel and perpendicular to its fibers. When force was applied perpendicular to the fibers, the wooden block failed at a compressive strength of 4.7712x107 N/m2. When applied parallel to the fibers, the failure strength was lower at 1.204x107 N/m2. Detailed load-deformation data is provided in tables showing that the material can withstand over 10 times more load when compressed parallel rather than perpendicular to its fibers, as the fibers act like columns parallel to the load.
8 beam deflection
This document discusses beam deflection. It begins by defining beam deflection and the factors that affect it, including bending moment, material properties, and shape properties. It then presents the general formula for calculating beam deflection using double integration of the bending moment equation. Examples are given of using boundary conditions to solve for deflection in simply supported beams, cantilever beams, and beams under various loading types. Common deflection formulas are also presented.
Physics - Chapter 3 Powerpoint
This document provides instructions for navigating a presentation on vectors and motion. It begins with directions for viewing the presentation as a slideshow and advancing through it. It then lists the chapter contents, including sections on vectors, vector operations, projectile motion, and relative motion. Examples are provided for key concepts like adding vectors graphically and resolving vectors into components.
Recommended
Shaft & Torsion
Text book for the mechanics of materials
Shaft & Torsion
・Angle of Torsion & Specific Angle of Torsion
・Stress & Strain under Torque
・Design of Shaft Diameter
Note: Your feedback is welcome!
Torsion testing experiment (instructor)
The document describes a torsion testing experiment. The objectives are to:
1. Determine the shear modulus (G) of different materials and the relationship between applied torque and angular twist.
2. Examine how material length affects angular twist.
The experiment involves twisting steel and brass rods of different lengths using known torques and measuring the angular deflection. Graphs of the data are used to calculate G, finding values of 68.46 GPa for steel and 38.8 GPa for brass, which are close to reference values. Testing another brass rod of varying lengths, a graph shows angular twist increases proportionally with length. G is recalculated from this graph as 43.50 GPa
Material Science Chapter 4
There are several types of defects that can arise in solids, including point defects like vacancies and interstitials, line defects like dislocations, and area defects like grain boundaries. The number and type of defects can be controlled through processing parameters and affect the material properties. While some defects are undesirable, others can play important roles like enabling plastic deformation through dislocation motion. Advanced microscopy techniques allow direct imaging of these defect structures at atomic scales.
Theory and Design for Mechanical Measurements solutions manual Figliola 4th ed
Figliola and Beasley’s 6th edition of Theory and Design for Mechanical Measurements provides a time-tested and respected approach to the theory of engineering measurements. An emphasis on the role of statistics and uncertainty analysis in the measuring process makes this text unique. While the measurements discipline is very broad, careful selection of topical coverage, establishes the physical principles and practical techniques for quantifying many engineering variables that have multiple engineering applications.
In the sixth edition, Theory and Design for Mechanical Measurements continues to emphasize the conceptual design framework for selecting and specifying equipment, test procedures and interpreting test results. Coverage of topics, applications and devices has been updated—including information on data acquisition hardware and communication protocols, infrared imaging, and microphones. New examples that illustrate either case studies or interesting vignettes related to the application of measurements in current practice are introduced.
Mechanics ppt 1
This document provides an overview of key kinematic concepts in mechanics and IB Physics including:
- Scalar and vector quantities as well as the differences between distance, displacement, speed, and velocity.
- Definitions and equations for rest, motion, acceleration, and projectile motion.
- Graphs showing relationships between position, velocity, and acceleration over time and how to calculate changes in position from these graphs.
- Key equations of motion including the SUVAT equations that can be used when acceleration is constant.
Compression test verification_for_a_wood
Experiment NO:6 describes a compression test performed on an anisotropic wooden material to determine its compressive strength when force is applied both parallel and perpendicular to its fibers. When force was applied perpendicular to the fibers, the wooden block failed at a compressive strength of 4.7712x107 N/m2. When applied parallel to the fibers, the failure strength was lower at 1.204x107 N/m2. Detailed load-deformation data is provided in tables showing that the material can withstand over 10 times more load when compressed parallel rather than perpendicular to its fibers, as the fibers act like columns parallel to the load.
8 beam deflection
This document discusses beam deflection. It begins by defining beam deflection and the factors that affect it, including bending moment, material properties, and shape properties. It then presents the general formula for calculating beam deflection using double integration of the bending moment equation. Examples are given of using boundary conditions to solve for deflection in simply supported beams, cantilever beams, and beams under various loading types. Common deflection formulas are also presented.
Physics - Chapter 3 Powerpoint
This document provides instructions for navigating a presentation on vectors and motion. It begins with directions for viewing the presentation as a slideshow and advancing through it. It then lists the chapter contents, including sections on vectors, vector operations, projectile motion, and relative motion. Examples are provided for key concepts like adding vectors graphically and resolving vectors into components.
Physics notes revision
This document provides notes on various physics concepts including:
- Units of measurement for length, time, speed, velocity, and acceleration.
- Concepts of mass vs weight, density, forces, Hooke's law, circular motion, moments, and center of mass.
- Forms of energy, work, power, and conservation of energy.
- Renewable and non-renewable energy resources.
The document covers essential high school physics concepts in a concise yet comprehensive manner.
Chapter 1 stress and strain
The document discusses stress and strain in materials. It introduces the key concepts of normal stress, shear stress, bearing stress, and thermal stress. Normal stress acts perpendicular to a cross-section, shear stress acts tangentially, and bearing stress occurs at contact points. The relationships between stress, strain, elastic modulus, and Poisson's ratio are explained. Methods for calculating stress and strain in axial loading, torsion, bending and combined loading are presented through examples. The stress-strain diagram is discussed to show material properties like yield strength and ductility.
Torsion
1. The presentation covered design for torsion in structural members, including definitions, effects of torsion such as rotation and warping, and methods for calculating torsional stresses.
2. Equations were presented for calculating torsional moments in circular and rectangular beams under different loading cases.
3. Two theories for analyzing reinforced concrete members under torsion were discussed: skew bending theory and space truss analogy theory. Limitations on torsional reinforcement in concrete were also reviewed.
'12 ME 341 chapter 5
This document provides an overview of mechanical design failure theories for static loading conditions. It discusses ductile and brittle failure theories, including maximum shear stress criterion, maximum distortion energy theory, maximum normal stress criterion, Coulomb-Mohr theory, and modified Mohr theory. An example problem is presented to calculate factors of safety for different elements of a mechanical part under combined loading using the von Mises and maximum shear stress failure criteria for ductile materials.
Curvilinear motion of a particle
This PPT covers curvilinear motion of an object in a very systematic and lucid manner. I hope this PPT will be helpful for instructor's as well as students.
Parallel axis theorem and their use on Moment Of Inertia
you can learn how to use parallel axis theorem to calculate the moment of inertia about centroidal axis and its transfer rule.
Physics Chapter 5 Pp Presentation
This presentation provides instructions on how to view and navigate through a slideshow. It explains that clicking "View" and then "Slide Show" will start the presentation. Users can advance slides by clicking the right arrow or space bar. Clicking on resources from the resources slide will show presentations for those resources. Clicking lessons from the Chapter menu will go directly to those lessons. Users can exit at any time by pressing Esc. The presentation also contains sample problems, objectives, definitions, equations and multiple choice questions related to work, energy, power and conservation of energy.
Peridynamic simulation of delamination propagation in fiber-reinforced composite
This document outlines a peridynamic simulation of delamination propagation in fiber-reinforced composites. It introduces peridynamic theory and the bond-based peridynamic model for composites. It describes the micromodulus, critical stretch criteria, and energy-based approaches for modeling failure. It also discusses explicit and implicit solvers, as well as the use of GPU computing to simulate crack propagation examples like double cantilever beam and transverse crack tension tests.
O level work energy and power
This document defines work, energy, and power. It states that work is the product of force and distance, and the SI unit for work is the joule. It describes different types of energy including chemical, electrical, mechanical, kinetic, and potential energy. Kinetic energy is defined as half mass times velocity squared, while potential energy from gravity is defined as mass times gravity times height. The document notes that energy is conserved and can only be transformed between forms. It defines power as the rate of doing work, with the SI unit being watts.
FEA MESH QUALITY PARAMETER
This document discusses mesh quality parameters and the penalty approach in finite element analysis. It defines key parameters that affect mesh quality such as skewness, aspect ratio, warp angle, and Jacobian. Values for tetrahedral meshing are also defined, including tetra collapse, volumetric skew, stretch, and distortion. The document explains that improving element quality manually or through automatic programs can enhance accuracy. It concludes with an overview of the penalty approach theory in finite element analysis.
Som complete unit 01 notes
This document provides an overview of strength of materials and introduces key concepts. It discusses stress and strain, ductile and brittle materials, and stress-strain diagrams. Stress is defined as the internal resisting force per unit area acting on a material. Strain is the ratio of change in dimension to the original dimension when a body is subjected to external force. Ductile materials show deformation under stress, while brittle materials do not. The stress-strain diagram shows the relationship between stress and strain for ductile and brittle materials.
Properties of material
This document discusses the physical, mechanical, and chemical properties of materials. It describes key physical properties like density, specific heat, thermal conductivity, and electrical conductivity. It also outlines important mechanical properties such as tensile strength, ductility, malleability, brittleness, elasticity, plasticity, toughness, and hardness. Finally, it briefly touches on relevant chemical properties including corrosion resistance and erosion resistance.
Unit 6, Lesson 3 - Vectors
Unit 6, Lesson 3 - Vectors
Lesson Outline:
1. Vector Representation
2. Graphical Method
3. Mathematical Method
4. Pythagorean Theorem
5. Component Method
The simple pendulum (using O.D.E)
This document discusses the simple pendulum. It describes a simple pendulum as consisting of a mass suspended by a string of negligible mass, with the angle varying sinusoidally with time. The restoring force is proportional to the sine of the angle, allowing it to be treated mathematically similarly to a mass on a spring. The period of a pendulum depends only on its length. Several examples are provided to illustrate physical pendulums and calculating oscillation properties like period. Assumptions of the simple pendulum model are noted.
Waves Presentation
The document discusses different parts of waves including the crest, trough and wavelength. It defines amplitude as loudness and frequency as pitch measured in Hertz. It explains that sound waves use energy to move and we hear them through our ears when someone talks, though we can't see the sound waves. When combining waves, high pressures cancel low pressures while two high or low pressures reinforce each other.
Kinematics - The Study of Motion
Describes displacement, velocity, acceleration as vectors and distance and speed as scalars, Show all needed equations and their use.
**More good stuff available at:
www.wsautter.com
and
http://www.youtube.com/results?search_query=wnsautter&aq=f
0.1 introduction to waves
A wave is a disturbance that propagates through a medium without transporting matter. Particles in the medium oscillate locally as the wave passes by but do not move with the wave. A mechanical wave requires a source of disturbance, a medium that can be disturbed, and a mechanism to transfer the disturbance. Mechanical waves include sound waves, water waves, and seismic waves. Properties of a wave include wavelength, amplitude, period, frequency, and wave speed. The period is the time for one wavelength to pass a point, and frequency is the inverse of period. Wave speed equals wavelength multiplied by frequency.
Instrumentation Lab. Experiment #6 Report: Strain Measurements 1
This file contains a report for the 6th experiment in the Lab "Instrumentation and Dynamic Systems", taken by mechanical engineering students.
centroid & moment of inertia
This document discusses methods for determining areas, volumes, centroids, and moments of inertia of basic geometric shapes. It begins by introducing the method of integration for calculating areas and volumes. Standard formulas are provided for areas of rectangles, triangles, circles, sectors, and parabolic spandrels. Formulas are also provided for volumes of parallelepipeds, cones, spheres, and solids of revolution. The concepts of center of gravity, centroid, and center of mass are defined. Equations are given for calculating the centroids of uniform bodies, plates, wires, and line segments. Methods for finding centroids of straight lines, arcs, semicircles, and quarter circles are illustrated.
Chapter 5 failure theories final
The document summarizes different theories for predicting failure under static loading conditions. It discusses:
1) Failure theories for ductile materials including maximum shear stress, distortion energy, and ductile Coulomb-Mohr theories, which are based on yield.
2) Failure theories for brittle materials including maximum normal stress, brittle Coulomb-Mohr, and modified Mohr theories, which do not exhibit an identifiable yield strength.
3) Details of the maximum shear stress theory and distortion energy (Von Mises) theory for ductile materials. The distortion energy theory predicts failure when the distortion strain energy equals the energy at yield in tension.
Equations (Physics)
This document contains summaries of common physics equations related to electricity, waves, work, weight, speed, acceleration, energy, force, and transformers. Key equations defined include potential difference equaling current times resistance, power equaling potential difference times current, wave speed equaling frequency times wavelength, work done equaling force applied times distance moved, weight equaling mass times gravitational field strength, average speed equaling distance divided by time, and acceleration equaling change in velocity divided by time taken for the change.
RS_Fundamentals_Day12gsdh_sHJAHSJAJHKAK.ppt
1. The document discusses the fundamentals of remote sensing, including the electromagnetic spectrum and Planck's law which describes the spectral radiance of a blackbody.
2. It explains key terms used to describe radiant energy, such as flux, irradiance, radiance, and brightness temperature. Brightness temperature is determined by inverting Planck's law.
3. The temperature sensitivity of radiance at different wavelengths is examined, showing greater sensitivity at shorter wavelengths in the infrared portion of the spectrum. The relationship between radiance and temperature follows a power law as radiance is proportional to temperature raised to the power of alpha.
More Related Content
What's hot
Physics notes revision
This document provides notes on various physics concepts including:
- Units of measurement for length, time, speed, velocity, and acceleration.
- Concepts of mass vs weight, density, forces, Hooke's law, circular motion, moments, and center of mass.
- Forms of energy, work, power, and conservation of energy.
- Renewable and non-renewable energy resources.
The document covers essential high school physics concepts in a concise yet comprehensive manner.
Chapter 1 stress and strain
The document discusses stress and strain in materials. It introduces the key concepts of normal stress, shear stress, bearing stress, and thermal stress. Normal stress acts perpendicular to a cross-section, shear stress acts tangentially, and bearing stress occurs at contact points. The relationships between stress, strain, elastic modulus, and Poisson's ratio are explained. Methods for calculating stress and strain in axial loading, torsion, bending and combined loading are presented through examples. The stress-strain diagram is discussed to show material properties like yield strength and ductility.
Torsion
1. The presentation covered design for torsion in structural members, including definitions, effects of torsion such as rotation and warping, and methods for calculating torsional stresses.
2. Equations were presented for calculating torsional moments in circular and rectangular beams under different loading cases.
3. Two theories for analyzing reinforced concrete members under torsion were discussed: skew bending theory and space truss analogy theory. Limitations on torsional reinforcement in concrete were also reviewed.
'12 ME 341 chapter 5
This document provides an overview of mechanical design failure theories for static loading conditions. It discusses ductile and brittle failure theories, including maximum shear stress criterion, maximum distortion energy theory, maximum normal stress criterion, Coulomb-Mohr theory, and modified Mohr theory. An example problem is presented to calculate factors of safety for different elements of a mechanical part under combined loading using the von Mises and maximum shear stress failure criteria for ductile materials.
Curvilinear motion of a particle
This PPT covers curvilinear motion of an object in a very systematic and lucid manner. I hope this PPT will be helpful for instructor's as well as students.
Parallel axis theorem and their use on Moment Of Inertia
you can learn how to use parallel axis theorem to calculate the moment of inertia about centroidal axis and its transfer rule.
Physics Chapter 5 Pp Presentation
This presentation provides instructions on how to view and navigate through a slideshow. It explains that clicking "View" and then "Slide Show" will start the presentation. Users can advance slides by clicking the right arrow or space bar. Clicking on resources from the resources slide will show presentations for those resources. Clicking lessons from the Chapter menu will go directly to those lessons. Users can exit at any time by pressing Esc. The presentation also contains sample problems, objectives, definitions, equations and multiple choice questions related to work, energy, power and conservation of energy.
Peridynamic simulation of delamination propagation in fiber-reinforced composite
This document outlines a peridynamic simulation of delamination propagation in fiber-reinforced composites. It introduces peridynamic theory and the bond-based peridynamic model for composites. It describes the micromodulus, critical stretch criteria, and energy-based approaches for modeling failure. It also discusses explicit and implicit solvers, as well as the use of GPU computing to simulate crack propagation examples like double cantilever beam and transverse crack tension tests.
O level work energy and power
This document defines work, energy, and power. It states that work is the product of force and distance, and the SI unit for work is the joule. It describes different types of energy including chemical, electrical, mechanical, kinetic, and potential energy. Kinetic energy is defined as half mass times velocity squared, while potential energy from gravity is defined as mass times gravity times height. The document notes that energy is conserved and can only be transformed between forms. It defines power as the rate of doing work, with the SI unit being watts.
FEA MESH QUALITY PARAMETER
This document discusses mesh quality parameters and the penalty approach in finite element analysis. It defines key parameters that affect mesh quality such as skewness, aspect ratio, warp angle, and Jacobian. Values for tetrahedral meshing are also defined, including tetra collapse, volumetric skew, stretch, and distortion. The document explains that improving element quality manually or through automatic programs can enhance accuracy. It concludes with an overview of the penalty approach theory in finite element analysis.
Som complete unit 01 notes
This document provides an overview of strength of materials and introduces key concepts. It discusses stress and strain, ductile and brittle materials, and stress-strain diagrams. Stress is defined as the internal resisting force per unit area acting on a material. Strain is the ratio of change in dimension to the original dimension when a body is subjected to external force. Ductile materials show deformation under stress, while brittle materials do not. The stress-strain diagram shows the relationship between stress and strain for ductile and brittle materials.
Properties of material
This document discusses the physical, mechanical, and chemical properties of materials. It describes key physical properties like density, specific heat, thermal conductivity, and electrical conductivity. It also outlines important mechanical properties such as tensile strength, ductility, malleability, brittleness, elasticity, plasticity, toughness, and hardness. Finally, it briefly touches on relevant chemical properties including corrosion resistance and erosion resistance.
Unit 6, Lesson 3 - Vectors
Unit 6, Lesson 3 - Vectors
Lesson Outline:
1. Vector Representation
2. Graphical Method
3. Mathematical Method
4. Pythagorean Theorem
5. Component Method
The simple pendulum (using O.D.E)
This document discusses the simple pendulum. It describes a simple pendulum as consisting of a mass suspended by a string of negligible mass, with the angle varying sinusoidally with time. The restoring force is proportional to the sine of the angle, allowing it to be treated mathematically similarly to a mass on a spring. The period of a pendulum depends only on its length. Several examples are provided to illustrate physical pendulums and calculating oscillation properties like period. Assumptions of the simple pendulum model are noted.
Waves Presentation
The document discusses different parts of waves including the crest, trough and wavelength. It defines amplitude as loudness and frequency as pitch measured in Hertz. It explains that sound waves use energy to move and we hear them through our ears when someone talks, though we can't see the sound waves. When combining waves, high pressures cancel low pressures while two high or low pressures reinforce each other.
Kinematics - The Study of Motion
Describes displacement, velocity, acceleration as vectors and distance and speed as scalars, Show all needed equations and their use.
**More good stuff available at:
www.wsautter.com
and
http://www.youtube.com/results?search_query=wnsautter&aq=f
0.1 introduction to waves
A wave is a disturbance that propagates through a medium without transporting matter. Particles in the medium oscillate locally as the wave passes by but do not move with the wave. A mechanical wave requires a source of disturbance, a medium that can be disturbed, and a mechanism to transfer the disturbance. Mechanical waves include sound waves, water waves, and seismic waves. Properties of a wave include wavelength, amplitude, period, frequency, and wave speed. The period is the time for one wavelength to pass a point, and frequency is the inverse of period. Wave speed equals wavelength multiplied by frequency.
Instrumentation Lab. Experiment #6 Report: Strain Measurements 1
This file contains a report for the 6th experiment in the Lab "Instrumentation and Dynamic Systems", taken by mechanical engineering students.
centroid & moment of inertia
This document discusses methods for determining areas, volumes, centroids, and moments of inertia of basic geometric shapes. It begins by introducing the method of integration for calculating areas and volumes. Standard formulas are provided for areas of rectangles, triangles, circles, sectors, and parabolic spandrels. Formulas are also provided for volumes of parallelepipeds, cones, spheres, and solids of revolution. The concepts of center of gravity, centroid, and center of mass are defined. Equations are given for calculating the centroids of uniform bodies, plates, wires, and line segments. Methods for finding centroids of straight lines, arcs, semicircles, and quarter circles are illustrated.
Chapter 5 failure theories final
The document summarizes different theories for predicting failure under static loading conditions. It discusses:
1) Failure theories for ductile materials including maximum shear stress, distortion energy, and ductile Coulomb-Mohr theories, which are based on yield.
2) Failure theories for brittle materials including maximum normal stress, brittle Coulomb-Mohr, and modified Mohr theories, which do not exhibit an identifiable yield strength.
3) Details of the maximum shear stress theory and distortion energy (Von Mises) theory for ductile materials. The distortion energy theory predicts failure when the distortion strain energy equals the energy at yield in tension.
What's hot (20)
Parallel axis theorem and their use on Moment Of Inertia
Parallel axis theorem and their use on Moment Of Inertia
Peridynamic simulation of delamination propagation in fiber-reinforced composite
Peridynamic simulation of delamination propagation in fiber-reinforced composite
Instrumentation Lab. Experiment #6 Report: Strain Measurements 1
Instrumentation Lab. Experiment #6 Report: Strain Measurements 1
Similar to Physical quantities and their units
Equations (Physics)
This document contains summaries of common physics equations related to electricity, waves, work, weight, speed, acceleration, energy, force, and transformers. Key equations defined include potential difference equaling current times resistance, power equaling potential difference times current, wave speed equaling frequency times wavelength, work done equaling force applied times distance moved, weight equaling mass times gravitational field strength, average speed equaling distance divided by time, and acceleration equaling change in velocity divided by time taken for the change.
RS_Fundamentals_Day12gsdh_sHJAHSJAJHKAK.ppt
1. The document discusses the fundamentals of remote sensing, including the electromagnetic spectrum and Planck's law which describes the spectral radiance of a blackbody.
2. It explains key terms used to describe radiant energy, such as flux, irradiance, radiance, and brightness temperature. Brightness temperature is determined by inverting Planck's law.
3. The temperature sensitivity of radiance at different wavelengths is examined, showing greater sensitivity at shorter wavelengths in the infrared portion of the spectrum. The relationship between radiance and temperature follows a power law as radiance is proportional to temperature raised to the power of alpha.
ESAUnit2.ppt
This document discusses key concepts in physics related to motion, forces, energy, and sound. It covers Aristotle and Galileo's early contributions, followed by Newton's laws of motion and universal law of gravitation. Key topics include linear and circular motion, forces, work, energy, heat transfer, and properties of sound waves like frequency, wavelength, and the Doppler effect. Equations for acceleration, velocity, forces, energy, heat, and sound are provided alongside examples to illustrate their application.
Outcome 2.1 & 2.2 identify and use internationally recognised (si) units of...
Outcome 2.1 & 2.2 identify and use internationally recognised (si) units of measurement for general and specifically to electrical variables
Physics Formula list (1)
This document provides a reference guide and formula sheet for physics. It includes over 100 physics formulas organized into sections on vectors, kinematics, dynamics, energy, momentum, rotational motion, fluids, thermodynamics, electricity, magnetism, optics, modern physics, and miscellaneous formulas. The formulas cover topics ranging from weight and density to projectile motion, circular motion, waves, thermodynamics laws, electric circuits, and relativity.
Physics formulas
This document provides physics formulas and constants for various topics in physics including:
1) Mechanics formulas for kinematics, forces, energy, momentum, and more.
2) Electromagnetism formulas for electric fields, circuits, magnetism, and more.
3) Fluid mechanics and thermal physics formulas for pressure, temperature, heat transfer, and more.
4) Waves and optics formulas for waves, reflection, refraction, lenses, and more.
5) Atomic and nuclear physics formulas for quantum mechanics, atomic structure, and more.
Physics Formula list (3)
This document provides a table of constants, conversion factors, and other information relevant for physics. It includes fundamental constants like the speed of light, Planck's constant, and gravitational constant. It also lists common physics prefixes, trigonometric functions, and equations for mechanics, electricity and magnetism, thermodynamics, and other topics. The table is intended as a reference for students taking an advanced placement physics exam.
AP Physics 1 Equations
This document provides equations, constants, and other information relevant to the Advanced Placement Physics 1 exam. It includes equations for mechanics, electricity, waves, geometry, and trigonometry. Constants are given for quantities like the speed of light, Coulomb's constant, and gravitational acceleration. Unit symbols and prefixes are defined. Values are provided for trigonometric functions of common angles.
Si Derived Units.pdf
This document defines many SI derived units in terms of SI base units and provides their dimensional formulas. It lists units such as square metre for area, cubic metre for volume, metre per second for speed, newton for force, joule for energy, watt for power, pascal for pressure, and more. It expresses these derived units as combinations and ratios of dimensions of length, mass, and time.
Lo3 position and time plots
This document discusses position plots and time plots for waves. A position plot shows displacement as a function of position at a fixed time, allowing you to determine amplitude and wavelength. A time plot shows displacement over time at a fixed position, letting you find amplitude and frequency. The document provides examples of these plots and shows how to extract properties like wavelength, frequency, and period from the graphs. It also gives a comprehensive example of determining multiple wave properties from a time plot.
3. s.i units and formula
This document outlines an electrical science course covering principles of electricity. It discusses different sources of electromotive force including magnetic, chemical, and thermal. It also describes the effects of an electric current. The document reviews SI units for various electrical quantities and shows how to transpose basic formulas for current, potential, resistance, power, resistivity, period, frequency, magnetic flux, magnetic flux density, mass, weight, force, distance, and energy. Examples are provided for different formulas and materials. A consolidation section and formative assessment are mentioned for the next session.
Energy
The document discusses different forms of energy including kinetic energy, heat, electricity, electromagnetic waves, and mass. It explains that energy can be transformed from one form to another but cannot be created or destroyed. Mass is described as a form of energy according to Einstein's equation E=mc2. Examples are provided to illustrate concepts such as kinetic energy, electromagnetic frequency, and how a small amount of mass contains a huge amount of potential energy.
Physics Semester 2 Review and Tutorial
The document provides information about color-coded slides used in an online physics tutorial. Slides with different colored backgrounds relate to different physics concepts: red for word problems, tan for matching concepts, and olive for reading data tables. The document also includes example slides on these topics, as well as slides involving graphing. Additional slides provide physics equations, examples of calculating physics quantities like velocity and frequency, and graphs related to energy.
Physics 200+ formulas and concepts
This document provides a summary of 213 physics formulas organized into categories including acceleration, force, frequency, velocity, wavelength, angular velocity, displacement, density, kinematic equations, tangential velocity, kinetic energy, angular speed, buoyancy, efficiency, static friction, potential energy, and more. Each formula is defined in 1-2 sentences with the key variables and units identified. The formulas cover concepts in mechanics, thermodynamics, electricity, magnetism, waves, optics, and modern physics.
Introduction to Dynamics
The basic concepts associated with some elements of dynamic engineering systems and calculations are discussed. The theory associated with Linear and angular motion, energy and simple harmonic motion are outlined with sample calculations for each topic being given.
Revision notes on unit and dimensions
This document discusses units and dimensions in physics. It defines units as standards for measuring physical quantities so that measurements can be compared. Several systems of units are described, including the CGS, FPS, and MKS systems. The document also defines dimensional analysis, which determines the fundamental units of mass, length, and time that make up a physical quantity. Examples of dimensions, units, and derived mechanical and electrical physical quantities are provided. Principles for dimensional homogeneity and types of measurement errors are also summarized.
Mecánica de Fluidos_Merle C. Potter, David C. Wiggert_3ed Solucionario
The document provides information about free engineering solucionarios (solution manuals) and textbooks that can be downloaded. It states that the solution manuals contain fully solved and clearly explained solutions to all the problems in the textbooks. Visitors are invited to download the files for free. The document then lists the contents of Chapter 1 from an engineering textbook, which includes concepts like mass, density, pressure, power, energy, viscosity, and dimensional analysis.
Uslides2
This document summarizes key concepts in physics related to motion, forces, energy, and sound waves. It covers Newton's laws of motion, definitions of speed, velocity, and acceleration. It also discusses gravitational force, momentum, work, power, heat transfer, and the properties of sound waves including wavelength, frequency, and how the velocity of sound varies with temperature. Key figures discussed include Aristotle, Galileo, Newton, and their contributions to the study and understanding of motion and force.
Gravity and time
- The universe is made up of quantized space and time units
- Time ticks in quanta that slow down near masses, as mass curves space and time
- Gravity brings masses together to increase their combined mass and further slow the ticking of time
- This slowing of time lowers the power consumption of the combined masses
- The universe applies gravity to minimize power consumption by synchronizing the ticking of time across masses
WISWEC - A NEW CONCEPT FOR A WAVE ENERGY CONVERTER
The proposed wave energy converter consists of a floating tube filled with water and power units inside. As waves pass, the water level inside the tube fluctuates up and down, causing buoys attached to the power units to move. This motion is converted to electrical energy via gear systems and generators. The design aims for low cost production and maintenance to produce electricity at around €0.05/kWh. Key aspects are its modular structure, ability to withstand storms by sinking below waves, and potential organization into zig-zag farms for efficient energy capture and transmission. Experimental testing is needed to validate the power generation capabilities and viability of the concept.
Similar to Physical quantities and their units (20)
Outcome 2.1 & 2.2 identify and use internationally recognised (si) units of...
Outcome 2.1 & 2.2 identify and use internationally recognised (si) units of...
Mecánica de Fluidos_Merle C. Potter, David C. Wiggert_3ed Solucionario
Mecánica de Fluidos_Merle C. Potter, David C. Wiggert_3ed Solucionario
WISWEC - A NEW CONCEPT FOR A WAVE ENERGY CONVERTER
WISWEC - A NEW CONCEPT FOR A WAVE ENERGY CONVERTER
Recently uploaded
原版制作(carleton毕业证书)卡尔顿大学毕业证硕士文凭原版一模一样
原版纸张【微信：741003700 】【(carleton毕业证书)卡尔顿大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsApplied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Cytokines and their role in immune regulation.pptx
This presentation covers the content and information on "Cytokines " and their role in immune regulation .
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
如何办理(uvic毕业证书)维多利亚大学毕业证本科学位证书原版一模一样
原版纸张【微信：741003700 】【(uvic毕业证书)维多利亚大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
Authoring a personal GPT for your research and practice: How we created the Q...
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
aziz sancar nobel prize winner: from mardin to nobel
aziz sancar nobel prize winner: from mardin to nobel
Cytokines and their role in immune regulation.pptx
Cytokines and their role in immune regulation.pptx
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
Authoring a personal GPT for your research and practice: How we created the Q...
Authoring a personal GPT for your research and practice: How we created the Q...
Physical quantities and their units
- 1. Length or Distance Time Mass Volume Density Velocity Acceleration Momentum Force Weight Pressure or Stress Energy or Work Kinetic Energy Potential Energy Power Impulse Action Angle Cycles Frequency Angular Velocity Angular Acceleration Moment of Inertia Angular Momentum Torque or Moment Temperature Heat Entropy Electric Charge +/− Current Voltage or Potential Resistance Capacitance Inductance Electric Field Electric Flux Magnetic Field Magnetic Flux fundamental fundamental fundamental distance3 Area distance2 mass / volume distance / time velocity / time mass × velocity mass × acceleration mass × acceleration of gravity force / area force × distance mass × velocity2 / 2 mass × acceleration of gravity × height energy / time force × time energy × time momentum × distance fundamental fundamental cycles / time angle / time angular velocity / time mass × radius2 radius × momentum moment of inertia radius × force moment of inertia fundamental heat energy heat / temperature fundamental charge / time energy / charge voltage / current charge / voltage voltage / (current / time) voltage / distance force / charge electric field × area force / (charge × velocity) magnetic field × area V = d3 A = d2 d = m/V v = d/t a = v/t p = m·v F = m·a W = m·g p = F/A E = F·d KE = m·v2/2 PE = m·g·h P = E/t I = F·t S = E·t S = p·d θ n f = n/t ω = θ/t α = ω/t I = m·r2 L = r·p L = I·ω τ = r·F τ = I·α T Q S = Q/T q i = q/t V = E/q R = V/i C = q/V L = V/(i/t) E = V/d E = F/q ΦE = E·A B = F/(q·v) ΦM = B·A m3 m2 kg/m3 m/s c (speed of light) m/s2 kg·m/s N (newton) = kg·m/s2 Pa (pascal) = N/m2 = kg/(m·s2) J (joule) = N·m = kg·m2/s2 W (watt) = J/s = kg·m2/s3 N·s = kg·m/s J·s = kg·m2/s ° (degree), rad (radian), rev 360° = 2π rad = 1 rev cyc (cycles) Hz (hertz) = cyc/s = 1/s rad/s = 1/s rad/s2 = 1/s2 kg·m2 J·s = kg·m2/s ħ (quantum of angular momentum) N·m = kg·m2/s2 °C (celsius), K (kelvin) J (joule) = kg·m2/s2 J/K C (coulomb) e (elementary charge) A (amp) = C/s V (volt) = J/C Ω (ohm) = V/A F (farad) = C/V H (henry) = V·s/A V/m = N/C V·m = N·m2/C T (tesla) = Wb/m2 = N·s/(C·m) Wb (weber) = V·s = J·s/C L3 L2 M/L3 L/T L/T2 ML/T ML/T2 M/LT2 ML2/T2 ML2/T3 ML/T ML2/T dimensionless dimensionless 1/T 1/T 1/T2 ML2 ML2/T ML2/T2 K (Temp.) ML2/T2 ML2/T2K Q (Charge) Q/T ML2/QT2 ML2/Q2T Q2T2/ML2 ML2/Q2 ML/QT2 ML3/QT2 M/QT ML2/QT d t m m (meter) s (second) kg (kilogram) L (Length) T (Time) M (Mass) × angular acceleration × angular velocity Mass, energy, momentum, angular momentum, and charge are conserved, which means the total amount does not change in an isolated system. Note: Other conventions define different quantities to be fundamental. h (quantum of action) Quantity Definition Formula Units Dimensions BasicMechanicalRotationalMechanicalThermalElectromagnetic Physical Quantities © 2003-2016 Keith Enevoldsen thinkzone.wlonk.com Creative Commons Attribution-ShareAlike 4.0 International License