This document summarizes the components and process of an auto tig welding machine. The machine is used to weld cylindrical sheet metal products along their length. It consists of a welding unit, side clamps, a holder, front clamps, a control unit, and a table. The welding process involves manually placing the cylindrical product in the holder, clamping it in place with the side and front clamps, running the welding unit along the product, then unclamping and removing the finished welded part.

1. This persentation will show us what is
auto tig machine and how this stuff
works…

2.  Good Morning
Allow me to introduce myself
 Name : Dwi Darsono
 NIM : 0220100015
 Class : TPM 2A

3.  Auto Tig Machine is a machine used to weld
cylindrical product.
Cylindrical Product is made
from sheet metal which
formed be cylindrical
Product will be welded
Area welded along the length

4. A
Welding unit
B
Side Clamp Unit
C
Holder
D
Front Clamp Unit
E
Control Unit
F
Table

5.  A
 Welding unit to weld
 B
 Side Clamp Unit to clamp side part of product
 C
 Holder to placed the product
 D
 Front Clamp Unit to clamp front part of product
 E
 Control Unit to turn on and turn off the machine
 F
 Table to placed all component support this machine
works

6. 1. Placed the CYLINDRICAL PRODUCT will be
welded manually into the HOLDER
2. Press ON Button in the Control Unit to run
the system
3. LEFT CLAMP and RIGHT CLAMP (Side
Clamp Unit) will move to the HOLDER to
Clamp the CYLINDRICAL PRODUCT
4. Then after side clamping finish, PUSHER
CYLINDER will push PUSHER exactly in
front of the HOLDER
5. After PUSHER CYLINDER moves to the
limit, PUSHER will clamp front part of
CYLINDRICAL PRODUCT

7. 6. After that TORCH (Welding Unit) moves down
(pushed by TORCH CYLINDER) and welding
process is running simultaneosly the TORCH
moves to the front
7. Then after TORCH moves to the limit, TORCH
moves up (Pulled by TORCH CYLINDER). After
that TORCH will move back again to the home
position.
8. Then LEFT CLAMP and RIGHT CLAMP (Side
Clamping Unit) moves back to the home
position.
9. PUSHER moves back after LEFT CLAMP and
RIGHT CLAMP touches home position

8. 10. PUSHER CYLINDER
moves back too
after PUSHER
arrives in home
position.
11. Then take the
CYLINDRICAL
PRODUCT has been
welded manually.
12. The Process has
been finish already
Cylindrical product has been
welded

9. CLICK to run the video

10.  Thank you for your attention
for another information please email to:
dwi.tangerang80@gmail.com