Pengantar_Metalurgi.ppt
•Download as PPT, PDF•
0 likes•33 views
This document outlines the syllabus for an introductory metallurgy course at the University of Jenderal Achmad Yani. The course objectives are to provide fundamental knowledge about metal processing from raw materials to finished products. The syllabus covers topics such as metal extraction, iron and steel production processes, furnace types, material properties, phase diagrams, heat treatment, and testing. Students will be evaluated through midterm and final exams, assignments, quizzes, and must attend at least 70% of classes to take the final exam. Recommended textbooks are also provided.
Report
Share
Report
Share
Recommended
ADVANCED MATERIALS BASICS.pdf
This document provides an outline for a course on Advanced Materials. It discusses the following:
- The course will cover topics like light metals and alloys, high temperature materials, composites, and more.
- The objectives are to accelerate design and development of systems using advanced materials.
- It asks sample questions a materials science student may have to understand properties based on structure.
- It introduces key concepts in materials science like structure-property relationships, different length scales of structure, properties of materials, processing, and characterization.
- The importance of materials science is that it combines different fields to solve problems using materials in an economical way.
ME6403 - ENGINEERING MATERIALS AND METALLURGY BY Mr.ARIVUMANI RAVANAN /AP/MEC...
ME6403 - ENGINEERING MATERIALS AND METALLURGY BY Mr.ARIVUMANI RAVANAN /AP/MEC...KIT-Kalaignar Karunanidhi Institute of Technology
This document provides an overview of a course on engineering materials and metallurgy. It includes 5 units that cover various topics:
Unit 1 discusses the constitution of alloys and phase diagrams, including classifications of materials, bonding types, crystal structures, imperfections, solid solutions, and iron-carbon phase diagrams.
Unit 2 covers heat treatment processes such as hardening, annealing, normalizing and tempering.
Unit 3 examines the effects of alloying elements on ferrous and non-ferrous metals.
Unit 4 explores non-metallic materials including polymers, ceramics, and composites.
Unit 5 analyzes mechanical properties and deformation mechanisms like hardness testing, impact testing, fatigueStruktur kurikulum-s1-teknik-metalurgi-dan-material
This document outlines the curriculum structure for the Bachelor of Engineering in Metallurgical and Materials Engineering program. It includes:
- The courses required in each of the 8 semesters, including course codes, names, and credit hours. Core courses cover topics like calculus, physics, chemistry, materials characterization, physical metallurgy, and materials processing.
- A list of elective courses that can be chosen from, related to specialized topics in metallurgy, polymers, corrosion, nano-materials and more.
- Detailed course descriptions for some core first year courses to outline the topics and concepts covered in courses like engineering drawing, introduction to materials, physical metallurgy 1, and
An overview to the science of materials.
CONTENT DELIVERED:
Knowing about the materials around us and trying to revolutionize them for the betterment of the humankind should be a priority to all engineers irrespective of their discipline. In an attempt to introduce materials and their impact on daily life and innovations that have happened on the past from Stone Age to the impending one well into the futuristic world were unveiled to the audience. From the historical perspective cutting through the different eras and the evolution of different materials due to the cultural and industrial revolutions were discussed. The significant classification of the materials from the past to the present and into the future was also revealed to the students.
Highlighting the due importance of the failure analysis from the pieces of the history made the audience to understand its utmost importance in their pursuit toward perfection in whatever they are intend to design.Titanic,Bhopal and Columbia tragedies and their message to the engineers were narrated.
The good, bad and ugly parts of the plastics were highlighted by citing crucial examples across the world and in particular from USA, the super power.Guidence regarding this were taken from International youth programme and summit 2012. This was done with an intention of narrating them different aspects of plastics and what they are supposed to do to save earth and future generation from the perils of it. Finally the career options in this discipline were also shown to them.
GENERAL ASPECTS OF MATERIAL CHEMISTRY.pptx
This document provides an overview of materials chemistry and the key concepts within the field. It defines materials chemistry as using chemistry to create, characterize, and apply materials with useful physical or chemical properties. The document outlines different types of materials such as natural vs synthetic, organic vs inorganic, and amorphous vs crystalline materials. It also discusses the structure of materials from the atomic to macroscale levels and different types of bonds that can be found in solid materials like ionic, covalent, and metallic bonds. The properties, processing, and applications of materials are determined by their structure and composition.
Lecture 1- Introduction to Subject (3).pptx
This document outlines a course on materials and metallurgy. It includes the course code, name, objectives, outcomes, module contents, experiments, and examination scheme. The course aims to familiarize students with structure-property correlations, processing-property relationships, alloying of steels, and advances in materials development. Key topics covered include classification of materials, phase diagrams, heat treatment, strengthening mechanisms, composites, polymers and ceramics. Students will learn to identify material properties, apply phase diagrams, perform heat treatments, analyze failures and choose materials. Laboratory experiments and internal and end semester assessments are also included.
M02 3 sy050413070700
This document outlines the curriculum for a Materials Technology course taught in the third semester of the Diploma in Mechanical Engineering program at Rajiv Gandhi Proudyogiki Vishwavidyalaya University in Bhopal, India. The curriculum was implemented in 2008. The course covers topics such as engineering materials, material properties testing, phase diagrams, heat treatment of steels, ferrous and non-ferrous metals and alloys, plastics, powder metallurgy, and modern trends in materials. It includes 60 hours of lectures and 45 hours of practical sessions over 14 topics. The document provides details on the course content, list of experiments, references and rationale.
Recommended
ADVANCED MATERIALS BASICS.pdf
This document provides an outline for a course on Advanced Materials. It discusses the following:
- The course will cover topics like light metals and alloys, high temperature materials, composites, and more.
- The objectives are to accelerate design and development of systems using advanced materials.
- It asks sample questions a materials science student may have to understand properties based on structure.
- It introduces key concepts in materials science like structure-property relationships, different length scales of structure, properties of materials, processing, and characterization.
- The importance of materials science is that it combines different fields to solve problems using materials in an economical way.
ME6403 - ENGINEERING MATERIALS AND METALLURGY BY Mr.ARIVUMANI RAVANAN /AP/MEC...
ME6403 - ENGINEERING MATERIALS AND METALLURGY BY Mr.ARIVUMANI RAVANAN /AP/MEC...KIT-Kalaignar Karunanidhi Institute of Technology
This document provides an overview of a course on engineering materials and metallurgy. It includes 5 units that cover various topics:
Unit 1 discusses the constitution of alloys and phase diagrams, including classifications of materials, bonding types, crystal structures, imperfections, solid solutions, and iron-carbon phase diagrams.
Unit 2 covers heat treatment processes such as hardening, annealing, normalizing and tempering.
Unit 3 examines the effects of alloying elements on ferrous and non-ferrous metals.
Unit 4 explores non-metallic materials including polymers, ceramics, and composites.
Unit 5 analyzes mechanical properties and deformation mechanisms like hardness testing, impact testing, fatigueStruktur kurikulum-s1-teknik-metalurgi-dan-material
This document outlines the curriculum structure for the Bachelor of Engineering in Metallurgical and Materials Engineering program. It includes:
- The courses required in each of the 8 semesters, including course codes, names, and credit hours. Core courses cover topics like calculus, physics, chemistry, materials characterization, physical metallurgy, and materials processing.
- A list of elective courses that can be chosen from, related to specialized topics in metallurgy, polymers, corrosion, nano-materials and more.
- Detailed course descriptions for some core first year courses to outline the topics and concepts covered in courses like engineering drawing, introduction to materials, physical metallurgy 1, and
An overview to the science of materials.
CONTENT DELIVERED:
Knowing about the materials around us and trying to revolutionize them for the betterment of the humankind should be a priority to all engineers irrespective of their discipline. In an attempt to introduce materials and their impact on daily life and innovations that have happened on the past from Stone Age to the impending one well into the futuristic world were unveiled to the audience. From the historical perspective cutting through the different eras and the evolution of different materials due to the cultural and industrial revolutions were discussed. The significant classification of the materials from the past to the present and into the future was also revealed to the students.
Highlighting the due importance of the failure analysis from the pieces of the history made the audience to understand its utmost importance in their pursuit toward perfection in whatever they are intend to design.Titanic,Bhopal and Columbia tragedies and their message to the engineers were narrated.
The good, bad and ugly parts of the plastics were highlighted by citing crucial examples across the world and in particular from USA, the super power.Guidence regarding this were taken from International youth programme and summit 2012. This was done with an intention of narrating them different aspects of plastics and what they are supposed to do to save earth and future generation from the perils of it. Finally the career options in this discipline were also shown to them.
GENERAL ASPECTS OF MATERIAL CHEMISTRY.pptx
This document provides an overview of materials chemistry and the key concepts within the field. It defines materials chemistry as using chemistry to create, characterize, and apply materials with useful physical or chemical properties. The document outlines different types of materials such as natural vs synthetic, organic vs inorganic, and amorphous vs crystalline materials. It also discusses the structure of materials from the atomic to macroscale levels and different types of bonds that can be found in solid materials like ionic, covalent, and metallic bonds. The properties, processing, and applications of materials are determined by their structure and composition.
Lecture 1- Introduction to Subject (3).pptx
This document outlines a course on materials and metallurgy. It includes the course code, name, objectives, outcomes, module contents, experiments, and examination scheme. The course aims to familiarize students with structure-property correlations, processing-property relationships, alloying of steels, and advances in materials development. Key topics covered include classification of materials, phase diagrams, heat treatment, strengthening mechanisms, composites, polymers and ceramics. Students will learn to identify material properties, apply phase diagrams, perform heat treatments, analyze failures and choose materials. Laboratory experiments and internal and end semester assessments are also included.
M02 3 sy050413070700
This document outlines the curriculum for a Materials Technology course taught in the third semester of the Diploma in Mechanical Engineering program at Rajiv Gandhi Proudyogiki Vishwavidyalaya University in Bhopal, India. The curriculum was implemented in 2008. The course covers topics such as engineering materials, material properties testing, phase diagrams, heat treatment of steels, ferrous and non-ferrous metals and alloys, plastics, powder metallurgy, and modern trends in materials. It includes 60 hours of lectures and 45 hours of practical sessions over 14 topics. The document provides details on the course content, list of experiments, references and rationale.
Material Science and Technology of Materials
The department was founded in 1963 and trains undergraduate and graduate students in material science and technology. Research focuses on developing new alloys with high damping capacity, including iron, zinc-aluminum, and manganese-copper alloys. Over 300 publications and several patents have resulted from this research. Future work will explore nanostructured alloys and shape memory alloys for medical applications.
Introduction to Materials Testing
Subject Name: Testing of Materials (TOM)
Subject code: OML751
Unit I: Introduction to Materials Testing
B.E. Mechanical Engineering
Final year, VII Semester.
Open Elective Subject
[As per Anna university syllabus; R-2017]
Som lab
This document outlines the objectives, experiments, outcomes, references, equipment, and quantity needed for a Strength of Materials laboratory course. The course aims to expose students to experimentally testing different materials under forces to determine their characteristics. The 10 listed experiments include tension, compression, torsion, impact, and hardness tests on metals as well as deflection tests on beams and springs. The expected outcome is for students to gain knowledge in experimentally testing materials and structural components.
introduction to engg materials
1. The document discusses the evolution of engineering materials from stone and wood in ancient times to over 80,000 materials today.
2. Key topics covered include the definitions of material science, material engineering, and classification of materials according to properties and applications.
3. Material selection involves analyzing requirements, evaluating candidate materials, and considering factors like material performance, design constraints, and cost.
1.1.introduction
The document contains information about a materials engineering course taught by Dr. Nor Akmal Fadil including his educational background, course objectives to introduce various classes of materials and their properties, assessment breakdown consisting of tests, quizzes and assignments, and a scheduled lecture plan covering topics like atomic bonding, crystal structures, phase diagrams and heat treatment processes.
Assisting in material testing lecture note-aragaw edited-2007ec.pdf
Assisting in material testing lecture note-aragaw edited-2007ec.pdfDefence University, Maj.Gen.Mulugeta Buli Poly-Technic College
This document provides an overview of material testing and identification. It begins with learning objectives that cover identifying engineering materials, their properties, sources of information, preparing materials for testing, and recording results. It then discusses the main branches of materials science including metallurgy, ceramics, polymers, composites, and materials engineering. Specific types of common engineering materials like metals, ceramics, polymers, and composites are defined along with examples. Methods for identifying materials like physical appearance, magnetic properties, chisel tests, fracture patterns, flame and spark tests are outlined. The document concludes with discussing manufacturers' stamps used to identify metal alloy compositions.Classification of materials
This document provides an introduction to materials classification and the field of materials science. It discusses the historical evolution of materials from stone to more advanced materials like metals, ceramics, polymers and semiconductors. Materials are classified based on how atoms are bonded together, with the main categories being metals, ceramics, polymers and semiconductors. Materials science examines the relationship between a material's processing, structure, properties and performance.
Metallurgy Lab
This document discusses the microstructures of steels. It begins with an abstract that defines the differences between crystal structure and microstructure. It then provides a table of contents and introduction about the importance and widespread use of steel. The next sections describe the different crystal structures of steel at various temperatures and the main phase transformations that can occur in steels based on factors like composition and heat treatment. It concludes by discussing the different types of steels defined by their carbon content or alloying elements. References are provided to related literature on steel microstructures and properties.
Material Science and Metallurgy
Fundamentals of Crystal Structure: BCC, FCC and HCP Structures, coordination number and atomic packing factors, crystal imperfections -point line and surface imperfections. Atomic Diffusion: Phenomenon, Fick’s laws of diffusion, factors affecting diffusion.
PENDAHULUAN Materi Material Teknik 1.ppt
The document discusses materials science and engineering. It provides information on different types of materials including metals, ceramics, polymers, composites, and semiconductors. It also discusses the structure-property relationships in materials and how their properties are determined by composition and processing methods. Assessment in the course is based on assignments, midterm exam, final exam, and other factors.
Mat science_lect 1
The document provides information on a materials science course taught by Danyuo Yiporo. It includes the instructor's contact information, rules and regulations, teaching strategies, course assessment details, course content outline, and recommended textbooks. The course will use lectures, tutorials, assignments, quizzes, tests and exams to teach topics like atomic structure, crystals, alloys, properties of materials, and different classes of materials.
L02-Sample preparation techniques.pdf
The document discusses sample preparation techniques for materials characterization. It describes various techniques for fabricating metals, including forming operations like forging, rolling, extrusion and drawing. It also covers casting techniques like sand casting, die casting and investment casting. The document is a lecture on materials characterization from Dr. Inam Ullah that outlines techniques for preparing and analyzing samples of metals, ceramics and polymers.
Ch01 m
This document provides an overview of a Materials Science course, including the course objectives, topics, and policies. The course aims to introduce fundamental concepts of materials science including how material structure dictates properties and how processing can change structure. Over the semester, students will learn about various material types and properties, processing methods, and how the relationship between structure, processing and properties informs material selection for applications. The course will help students properly select materials, recognize new design opportunities, and understand the key relationship between processing, structure, and properties.
Mechanical Behavior of Engineering Materials.pptx
This document describes experimental methods to determine the dynamic fracture-initiation toughness of high-strength metals at various loading rates. Two materials were tested - AA7017-T73 aluminum alloy and Mars 240 armor steel. Specimens were prepared and tested using three methods: quasi-static tests on a universal testing machine, split Hopkinson pressure bar tests, and explosive tests. The AA7017-T73 alloy, which has very mild strain rate dependence, was used to validate the experimental techniques by showing similar toughness values across the test methods. Once validated, the techniques were used to test the Mars 240 steel and revealed an increase in its dynamic fracture-initiation toughness with higher loading rates.
ICE CONFERENCE_Jaya
This study examines the corrosion rate of aluminum, copper, and stainless steel metals when immersed in the phase change materials (PCMs) palmitic acid and myristic acid. Samples of each metal were immersed in the liquid PCMs at 70°C and observed over 20 days. Mass loss and physical appearance changes were measured. Copper exhibited the greatest mass loss of 36.5mg and 41.9mg in myristic and palmitic acid respectively. Aluminum showed more corrosion in myristic acid than palmitic acid. Stainless steel displayed minimal mass loss and corrosion in both PCMs. The study aims to evaluate which metals exhibit less corrosion for use as containers for
1 intro & history
This document provides an introduction to materials science and engineering. It discusses the objective of studying materials science, which is to develop an understanding of structure-property correlations in order to select suitable materials for applications. The document also outlines the scope of the course, which is to present fundamentals of materials science, expose students to different material classes and properties, and highlight important concepts through examples. A historical perspective is then given on the role of materials in human civilization and technological progress from the Stone Age to modern electronic and superconducting materials.
Steel.pdf
This document discusses ferrous metals and alloys, specifically focusing on steel. It covers the different types of steel based on carbon content, including plain carbon steels and alloy steels. Plain carbon steels are classified as low carbon (<0.3% C), medium carbon (0.3-0.6% C) and high carbon (>0.6% C). The applications of each type are also outlined, with low carbon steel used for machine parts, medium carbon for forged components, and high carbon for cutting tools. Alloy steels are also introduced along with how alloying elements like chromium, nickel and molybdenum can increase properties.
Industrial Excursion ( Yangon Division, Myanmar)
2014, November Field Training to Myaung Taka Steel production industry and Ywa Ma Steel Production Factory. We learnt rolling forging at Myaung Taka and Bolt, nut, washer production at Ywa Ma.
Chapter-1. Introduction.pptx
This document provides an introduction to a course on Material Characterization and Testing taught at the Indian Institute of Technology Roorkee. It outlines the course content which includes techniques like optical microscopy, electron microscopy, X-ray diffraction, thermal analysis, and mechanical testing. The course aims to give students a conceptual understanding of various material characterization and testing techniques. It will cover topics like crystal structure, strengthening mechanisms, sample preparation, and interpreting characterization data.
Study of effects of heat treatment on the hardness and microstructure of weld...
This study investigated the effects of annealing heat treatment on the microstructure and mechanical properties of welded low-carbon steel pipes with 0.078% carbon content. Welding was performed on steel pipe samples, followed by heat treating one of the samples at 850°C for 2 hours. Hardness tests and microstructural analysis were conducted on the heat treated and untreated samples. The results showed that the heat treated sample had a lower hardness and a more predominant pearlite structure compared to the untreated sample. This resulted in improved ductility and toughness for the heat treated sample due to carbon diffusion and grain refinement during annealing. Therefore, annealing heat treatment is recommended after welding low-carbon steel to obtain higher ductility properties.
More Related Content
Similar to Pengantar_Metalurgi.ppt
Material Science and Technology of Materials
The department was founded in 1963 and trains undergraduate and graduate students in material science and technology. Research focuses on developing new alloys with high damping capacity, including iron, zinc-aluminum, and manganese-copper alloys. Over 300 publications and several patents have resulted from this research. Future work will explore nanostructured alloys and shape memory alloys for medical applications.
Introduction to Materials Testing
Subject Name: Testing of Materials (TOM)
Subject code: OML751
Unit I: Introduction to Materials Testing
B.E. Mechanical Engineering
Final year, VII Semester.
Open Elective Subject
[As per Anna university syllabus; R-2017]
Som lab
This document outlines the objectives, experiments, outcomes, references, equipment, and quantity needed for a Strength of Materials laboratory course. The course aims to expose students to experimentally testing different materials under forces to determine their characteristics. The 10 listed experiments include tension, compression, torsion, impact, and hardness tests on metals as well as deflection tests on beams and springs. The expected outcome is for students to gain knowledge in experimentally testing materials and structural components.
introduction to engg materials
1. The document discusses the evolution of engineering materials from stone and wood in ancient times to over 80,000 materials today.
2. Key topics covered include the definitions of material science, material engineering, and classification of materials according to properties and applications.
3. Material selection involves analyzing requirements, evaluating candidate materials, and considering factors like material performance, design constraints, and cost.
1.1.introduction
The document contains information about a materials engineering course taught by Dr. Nor Akmal Fadil including his educational background, course objectives to introduce various classes of materials and their properties, assessment breakdown consisting of tests, quizzes and assignments, and a scheduled lecture plan covering topics like atomic bonding, crystal structures, phase diagrams and heat treatment processes.
Assisting in material testing lecture note-aragaw edited-2007ec.pdf
Assisting in material testing lecture note-aragaw edited-2007ec.pdfDefence University, Maj.Gen.Mulugeta Buli Poly-Technic College
This document provides an overview of material testing and identification. It begins with learning objectives that cover identifying engineering materials, their properties, sources of information, preparing materials for testing, and recording results. It then discusses the main branches of materials science including metallurgy, ceramics, polymers, composites, and materials engineering. Specific types of common engineering materials like metals, ceramics, polymers, and composites are defined along with examples. Methods for identifying materials like physical appearance, magnetic properties, chisel tests, fracture patterns, flame and spark tests are outlined. The document concludes with discussing manufacturers' stamps used to identify metal alloy compositions.Classification of materials
This document provides an introduction to materials classification and the field of materials science. It discusses the historical evolution of materials from stone to more advanced materials like metals, ceramics, polymers and semiconductors. Materials are classified based on how atoms are bonded together, with the main categories being metals, ceramics, polymers and semiconductors. Materials science examines the relationship between a material's processing, structure, properties and performance.
Metallurgy Lab
This document discusses the microstructures of steels. It begins with an abstract that defines the differences between crystal structure and microstructure. It then provides a table of contents and introduction about the importance and widespread use of steel. The next sections describe the different crystal structures of steel at various temperatures and the main phase transformations that can occur in steels based on factors like composition and heat treatment. It concludes by discussing the different types of steels defined by their carbon content or alloying elements. References are provided to related literature on steel microstructures and properties.
Material Science and Metallurgy
Fundamentals of Crystal Structure: BCC, FCC and HCP Structures, coordination number and atomic packing factors, crystal imperfections -point line and surface imperfections. Atomic Diffusion: Phenomenon, Fick’s laws of diffusion, factors affecting diffusion.
PENDAHULUAN Materi Material Teknik 1.ppt
The document discusses materials science and engineering. It provides information on different types of materials including metals, ceramics, polymers, composites, and semiconductors. It also discusses the structure-property relationships in materials and how their properties are determined by composition and processing methods. Assessment in the course is based on assignments, midterm exam, final exam, and other factors.
Mat science_lect 1
The document provides information on a materials science course taught by Danyuo Yiporo. It includes the instructor's contact information, rules and regulations, teaching strategies, course assessment details, course content outline, and recommended textbooks. The course will use lectures, tutorials, assignments, quizzes, tests and exams to teach topics like atomic structure, crystals, alloys, properties of materials, and different classes of materials.
L02-Sample preparation techniques.pdf
The document discusses sample preparation techniques for materials characterization. It describes various techniques for fabricating metals, including forming operations like forging, rolling, extrusion and drawing. It also covers casting techniques like sand casting, die casting and investment casting. The document is a lecture on materials characterization from Dr. Inam Ullah that outlines techniques for preparing and analyzing samples of metals, ceramics and polymers.
Ch01 m
This document provides an overview of a Materials Science course, including the course objectives, topics, and policies. The course aims to introduce fundamental concepts of materials science including how material structure dictates properties and how processing can change structure. Over the semester, students will learn about various material types and properties, processing methods, and how the relationship between structure, processing and properties informs material selection for applications. The course will help students properly select materials, recognize new design opportunities, and understand the key relationship between processing, structure, and properties.
Mechanical Behavior of Engineering Materials.pptx
This document describes experimental methods to determine the dynamic fracture-initiation toughness of high-strength metals at various loading rates. Two materials were tested - AA7017-T73 aluminum alloy and Mars 240 armor steel. Specimens were prepared and tested using three methods: quasi-static tests on a universal testing machine, split Hopkinson pressure bar tests, and explosive tests. The AA7017-T73 alloy, which has very mild strain rate dependence, was used to validate the experimental techniques by showing similar toughness values across the test methods. Once validated, the techniques were used to test the Mars 240 steel and revealed an increase in its dynamic fracture-initiation toughness with higher loading rates.
ICE CONFERENCE_Jaya
This study examines the corrosion rate of aluminum, copper, and stainless steel metals when immersed in the phase change materials (PCMs) palmitic acid and myristic acid. Samples of each metal were immersed in the liquid PCMs at 70°C and observed over 20 days. Mass loss and physical appearance changes were measured. Copper exhibited the greatest mass loss of 36.5mg and 41.9mg in myristic and palmitic acid respectively. Aluminum showed more corrosion in myristic acid than palmitic acid. Stainless steel displayed minimal mass loss and corrosion in both PCMs. The study aims to evaluate which metals exhibit less corrosion for use as containers for
1 intro & history
This document provides an introduction to materials science and engineering. It discusses the objective of studying materials science, which is to develop an understanding of structure-property correlations in order to select suitable materials for applications. The document also outlines the scope of the course, which is to present fundamentals of materials science, expose students to different material classes and properties, and highlight important concepts through examples. A historical perspective is then given on the role of materials in human civilization and technological progress from the Stone Age to modern electronic and superconducting materials.
Steel.pdf
This document discusses ferrous metals and alloys, specifically focusing on steel. It covers the different types of steel based on carbon content, including plain carbon steels and alloy steels. Plain carbon steels are classified as low carbon (<0.3% C), medium carbon (0.3-0.6% C) and high carbon (>0.6% C). The applications of each type are also outlined, with low carbon steel used for machine parts, medium carbon for forged components, and high carbon for cutting tools. Alloy steels are also introduced along with how alloying elements like chromium, nickel and molybdenum can increase properties.
Industrial Excursion ( Yangon Division, Myanmar)
2014, November Field Training to Myaung Taka Steel production industry and Ywa Ma Steel Production Factory. We learnt rolling forging at Myaung Taka and Bolt, nut, washer production at Ywa Ma.
Chapter-1. Introduction.pptx
This document provides an introduction to a course on Material Characterization and Testing taught at the Indian Institute of Technology Roorkee. It outlines the course content which includes techniques like optical microscopy, electron microscopy, X-ray diffraction, thermal analysis, and mechanical testing. The course aims to give students a conceptual understanding of various material characterization and testing techniques. It will cover topics like crystal structure, strengthening mechanisms, sample preparation, and interpreting characterization data.
Study of effects of heat treatment on the hardness and microstructure of weld...
This study investigated the effects of annealing heat treatment on the microstructure and mechanical properties of welded low-carbon steel pipes with 0.078% carbon content. Welding was performed on steel pipe samples, followed by heat treating one of the samples at 850°C for 2 hours. Hardness tests and microstructural analysis were conducted on the heat treated and untreated samples. The results showed that the heat treated sample had a lower hardness and a more predominant pearlite structure compared to the untreated sample. This resulted in improved ductility and toughness for the heat treated sample due to carbon diffusion and grain refinement during annealing. Therefore, annealing heat treatment is recommended after welding low-carbon steel to obtain higher ductility properties.
Similar to Pengantar_Metalurgi.ppt (20)
Assisting in material testing lecture note-aragaw edited-2007ec.pdf
Assisting in material testing lecture note-aragaw edited-2007ec.pdf
Study of effects of heat treatment on the hardness and microstructure of weld...
Study of effects of heat treatment on the hardness and microstructure of weld...
Recently uploaded
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Solutons Maths Escape Room Spatial .pptx
Solutions of Puzzles of Mathematics Escape Room Game in Spatial.io
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Recently uploaded (20)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Pengantar_Metalurgi.ppt
- 1. 1 kusharjanto, metalurgi-unjani TM-141 Pengantar Metalurgi Kusharjanto, Ir., MT. Metallurgical Engineering Department Faculty of Engineering University of Jenderal Achmad Yani 2 0 0 4
- 2. kusharjanto, metalurgi-unjani 2 Tujuan Perkuliahan • Memberikan/memperkenalkan pengetahuan dan pemahaman dasar tentang proses pengolahan bahan/material melalui berbagai proses hingga menjadi produk jadi (proses- proses dari hulu ke hilir).
- 3. kusharjanto, metalurgi-unjani 3 S i l a b u s • Pengantar mengenai metalurgi (siklus material). • Pengolahan bahan galian. • Pemurnian bijih logam. • Proses pembuatan besi kasar. • Proses pembuatan baja dari besi kasar. • Jenis-jenis tungku peleburan untuk besi cor dan baja. • Sifat-sifat bahan (mekanik, fisik, kimia dan teknologi). • Struktur atom. • Paduan dan diagram fasa. • Klasifikasi besi cor dan baja berdasarkan diagram fasa Fe-C. • Klasifikasi material berdasarkan standar. • Proses-proses manufaktur. • Pengujian bahan.
- 4. kusharjanto, metalurgi-unjani 4 P u s t a k a • W.F. Smith, “Principles of Materials Science and Engineering”, McGraw-Hill, Singapore, 1990. • J.A. Jacobs, ”Engineering Materials Technology”, Prentice-Hall, 1994. • S.H. Avner, ”Introduction to Physical Metallurgy”, McGraw-Hill, Tokyo, 1974. • D.S. Clark, W.R. Varney, ”Physical Metallurgy for Engineers”, Van- Nostrand Reinhold Co., New York, 1952. • D.A. Brandt, ”Metallurgy Fundamentals”, Goodheart-Willcox Co. Inc., South Holland, Illinois, 1985. • B.J. Moniz, ”Metallurgy”, 2nd edition, ATP, Homewood, Illinois, 1994. • E. Paul DeGarmo, J.T. Black, Kohser, ”Materials and Processes in Manufacturing”, Macmillan Publishing Company, New York, 1988. • Ying Zhang, “ME3110: Physical Metallurgy & Heat Treatment”, Lecture Modules, University of Tennessee, USA, 2003. • James P. Brik, “CHM-115 BLB, Chapter 23: Metals and Metallurgy”, Lecture Modules, Arizona State University, USA, 2001.
- 5. kusharjanto, metalurgi-unjani 5 Penilaian • Ujian Tengah Semester (UTS) = 30% • Ujian Akhir Semester (UAS) = 40% • Tugas-tugas = 20% • Kuis = 10% • Yang berhak mengikuti ujian akhir semester: kehadiran ≥ 70%
- 6. kusharjanto, metalurgi-unjani 6 Contoh-contoh produk : Early food containers of glass & steel use common ceramic and metal materials of the late 19th & early 20th centuries
- 7. kusharjanto, metalurgi-unjani 7 The new containers are lightweight, will not break, and offer long shelf life for their contents Advances in materials technology brought on new containers made of two- piece Al and steel cans and “barrier” packages made of laminated composites of plastics, aluminum, and paper.
- 8. kusharjanto, metalurgi-unjani 8 Decorated Foil Pouches for Food and Drink • 1XXX represents the commercially pure aluminum. High formability, corrosion resistance and electrical conductivity Electrical, chemical applications • The 1XXX series would not be used where strength is a prime consideration. • For the applications where extremely high corrosion resistance, formability and/or electrical conductivity are required (foil and strip for packaging) 1060 or 1110