This document describes a research study that implemented a behavioural safety program called BSQ (Behavioural Safety in Quarries) at two UK quarry sites. The study aimed to identify unsafe behaviors common in quarries, understand their root causes, and develop an effective behavioral approach. Key aspects of the BSQ program included identifying the top 20 unsafe behaviors through worker interviews, developing observation checklists, collecting baseline data through self-observations, providing feedback and goals to encourage behavior change, and evaluating outcomes. Early results suggested this alternative approach that relies on self-reporting is viable for the quarry environment which includes many lone workers, addressing limitations of traditional peer observation methods. The research contributes to limited existing studies on applying behavioral safety in the
La Unión Europea ha propuesto un nuevo paquete de sanciones contra Rusia que incluye un embargo al petróleo ruso. El embargo se aplicaría gradualmente durante seis meses para el petróleo crudo y ocho meses para los productos refinados. Los líderes de la UE debatirán el paquete de sanciones durante una cumbre especial a finales de mayo con el objetivo de aprobar las medidas.
This document summarizes a study on occupational safety and health (OSH) and contractor management programs at Kenya Breweries Limited (KBL). Some key findings from the study include:
1) Most workers (over 70%) had a college education or higher. Over 90% of workers were aware of workplace hazards and safety policies. The majority confirmed safety information was visible.
2) Contractors made up over 80% of the workforce. The manufacturing department relied most heavily on contractors.
3) Introduction of contractor safety training programs and appointment of safety officers were found to be the most effective programs in improving OSH, resulting in an over 80% reduction in accidents from 2010-2014.
This document provides guidelines for small-scale miners in South Africa to help them comply with health and safety requirements. It includes a self-assessment tool to help mine owners evaluate their existing health and safety management. The guidelines are intended to encourage dialogue on health and safety and promote a positive safety culture. The document defines small-scale mining and provides an overview of an occupational health and safety management system based on the ILO's Plan-Do-Check-Act model. It outlines the legislative requirements and provides topic-specific guidelines on various health and safety issues.
This document summarizes a research study that assessed risk management practices in the logistics and construction industries regarding human safety. The study found that worker training was the most critical factor for improving safety based on a survey of employees. Ensuring safety compliance and adequate communication about safety procedures were also important. The study recommends that companies provide regular safety training and incentives, maintain accident records, and compensate workers for injuries to improve safety culture. Overall, the research indicates a relationship between worker safety initiatives like training and better safety management practices in these high-risk industries.
IRJET- Deterrence Theory for Evaluating Information Security Factors in E-Hea...IRJET Journal
This document analyzes factors affecting the adoption of electronic health (e-health) systems using deterrence theory. It introduces e-health systems and proposes a theoretical model to test the impact of organizational factors like deterrent efforts, severity of consequences, and preventive efforts as well as individual factors like perceived security threats and awareness on intentions to proactively use e-health. An empirical study found that deterrent efforts and severity had no significant influence while preventive efforts were important. The document thus suggests organizations focus on preventive efforts like security solutions and awareness while reducing perceived threats.
1
3
Sun Coast Remediation Project
Michell Muldrow
Columbia Southern University
Research Methods
Dr. Senft
November 17, 2021
Table of Contents
Contents
Executive Summary 4
1.0 Introduction 5
1.1. Statement of Problems 5
1.1.1. Particulate Matter (PM) 5
1.1.2. Safety Training Effectiveness 6
1.1.3. Sound-Level Exposure 6
1.1.4. New Employee Training 6
1.1.5. Lead Exposure 7
1.1.6. Return-On-Investment 7
2.0. Literature Review 7
2.1. Particulate Matter (PM) Article 7
2.2. Safety Training Effectiveness 8
2.3. Sound-Level Exposure 9
2.4. New Employee Training 9
2.5. Lead Exposure 10
2.6. Return on Investment 10
3.0. Research Objectives, Research Questions, and Hypotheses 11
4.0. Research Methodology, Design, and Methods 14
4.1. Research Methodology 14
4.2. Research Design 14
4.3. Research Methods 15
4.3.1. Data Collection Methods 15
4.3.2. Sampling Design 15
5.0. Data Analysis Procedures 16
5.1. Data Analysis: Descriptive Statistics and Assumption Testing 17
5.1.2.1. Frequency Distribution Table 20
5.1.3.1. Frequency Distribution Table 22
5.1.4.1. Frequency Distribution Table 26
Testing 30
6.0. Findings and Recommendation 42
6.1. Findings 42
6.2. Recommendations 43
6.2.1. Particulate Matter Recommendation 43
6.2.2. Safety Training Effectiveness Recommendation 43
6.2.3. Sound-Level Exposure Recommendation 43
6.2.4. New Employee Training Recommendation 44
6.2.5. Lead Exposure Recommendation. 44
6.2.6. Return on Investment Recommendation 44
References 45
Executive Summary
Business executives are primarily concerned about the strategies to adopt to increase business transactions. Therefore, they screen various aspects to determine the critical areas that require to be solved using the business research method. The senior leaders at Sun Coast want to see the projects conducted to completion.
The paper comprises sections such as data collection, generating statements of problems, literature review, research objectives, research questions and hypothesis, methodology, design and methods, data analysis, finding, and recommendation.
1.0 Introduction
Senior leadership at Sun Coast has identified several areas for concern that they believe could be solved using business research methods. The previous director was tasked with researching to help provide information to make decisions about these issues. Although data were collected, the project was never completed. Senior leadership is interested in seeing the project through to fruition. The following is the completion of that project and includes a statement of the problems, literature review, research objectives, research questions and hypotheses, research methodology, design and methods, data analysis, findings, and recommendations. 1.1. Statement of Problems
Six business problems were identified:
1.1.1. Particulate Matter (PM)
There is a concern that job-site particle pollution is adversely impacting employee health. Although respirators are required in certain environments, particulate mat ...
1
3
Sun Coast Remediation Project
Michell Muldrow
Columbia Southern University
Research Methods
Dr. Senft
November 17, 2021
Table of Contents
Contents
Executive Summary 4
1.0 Introduction 5
1.1. Statement of Problems 5
1.1.1. Particulate Matter (PM) 5
1.1.2. Safety Training Effectiveness 6
1.1.3. Sound-Level Exposure 6
1.1.4. New Employee Training 6
1.1.5. Lead Exposure 7
1.1.6. Return-On-Investment 7
2.0. Literature Review 7
2.1. Particulate Matter (PM) Article 7
2.2. Safety Training Effectiveness 8
2.3. Sound-Level Exposure 9
2.4. New Employee Training 9
2.5. Lead Exposure 10
2.6. Return on Investment 10
3.0. Research Objectives, Research Questions, and Hypotheses 11
4.0. Research Methodology, Design, and Methods 14
4.1. Research Methodology 14
4.2. Research Design 14
4.3. Research Methods 15
4.3.1. Data Collection Methods 15
4.3.2. Sampling Design 15
5.0. Data Analysis Procedures 16
5.1. Data Analysis: Descriptive Statistics and Assumption Testing 17
5.1.2.1. Frequency Distribution Table 20
5.1.3.1. Frequency Distribution Table 22
5.1.4.1. Frequency Distribution Table 26
Testing 30
6.0. Findings and Recommendation 42
6.1. Findings 42
6.2. Recommendations 43
6.2.1. Particulate Matter Recommendation 43
6.2.2. Safety Training Effectiveness Recommendation 43
6.2.3. Sound-Level Exposure Recommendation 43
6.2.4. New Employee Training Recommendation 44
6.2.5. Lead Exposure Recommendation. 44
6.2.6. Return on Investment Recommendation 44
References 45
Executive Summary
Business executives are primarily concerned about the strategies to adopt to increase business transactions. Therefore, they screen various aspects to determine the critical areas that require to be solved using the business research method. The senior leaders at Sun Coast want to see the projects conducted to completion.
The paper comprises sections such as data collection, generating statements of problems, literature review, research objectives, research questions and hypothesis, methodology, design and methods, data analysis, finding, and recommendation.
1.0 Introduction
Senior leadership at Sun Coast has identified several areas for concern that they believe could be solved using business research methods. The previous director was tasked with researching to help provide information to make decisions about these issues. Although data were collected, the project was never completed. Senior leadership is interested in seeing the project through to fruition. The following is the completion of that project and includes a statement of the problems, literature review, research objectives, research questions and hypotheses, research methodology, design and methods, data analysis, findings, and recommendations. 1.1. Statement of Problems
Six business problems were identified:
1.1.1. Particulate Matter (PM)
There is a concern that job-site particle pollution is adversely impacting employee health. Although respirators are required in certain environments, particulate mat ...
This work presents the results of a case study and describes an important area within the field of con-struction safety management, namely behavior-based safety (BBS). This paper adopts and develops amanagement approach for safety improvements in construction site environments. A rigorous behav-ioral safety system and its intervention program was implemented and deployed on target constructionsites. After taking a few weeks of safety behavior measurements, the project management team imple-mented the designed intervention and measurements were taken. Goal-setting sessions were arrangedon-site with workers’ participation to set realistic and attainable targets of performance. Safety per-formance measurements continued and the levels of performance and the targets were presented onfeedback charts. Supervisors were asked to give workers recognition and praise when they acted safelyor improved critical behaviors. Observers were requested to have discussions with workers, visit the site,distribute training materials to workers, and provide feedback to crews and display charts. They wererequired to talk to operatives in the presence of line managers. It was necessary to develop awareness andunderstanding of what was being measured. In the process, operatives learned how to act safely whenconducting site tasks using the designed checklists. Current weekly scores were discussed in the weeklysafety meetings and other operational site meetings with emphasis on how to achieve set targets. Thereliability of the safety performance measures taken by the company’s observers was monitored. A clearincrease in safety performance level was achieved across all categories: personal protective equipment;housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scoresof safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the9th week. The results of intervention demonstrated large decreases in unsafe behaviors and significantincreases in safe behaviors. The results of this case study showed that an approach based on goal setting,feedback, and an effective measure of safety behavior if properly applied by committed management,can improve safety performance significantly in construction site environments. The results proved thatthe BBS management technique can be applied to any country’s culture, showing that it would be a goodapproach for improving the safety of front-line workers and that it has industry wide application forongoing construction projects.
La Unión Europea ha propuesto un nuevo paquete de sanciones contra Rusia que incluye un embargo al petróleo ruso. El embargo se aplicaría gradualmente durante seis meses para el petróleo crudo y ocho meses para los productos refinados. Los líderes de la UE debatirán el paquete de sanciones durante una cumbre especial a finales de mayo con el objetivo de aprobar las medidas.
This document summarizes a study on occupational safety and health (OSH) and contractor management programs at Kenya Breweries Limited (KBL). Some key findings from the study include:
1) Most workers (over 70%) had a college education or higher. Over 90% of workers were aware of workplace hazards and safety policies. The majority confirmed safety information was visible.
2) Contractors made up over 80% of the workforce. The manufacturing department relied most heavily on contractors.
3) Introduction of contractor safety training programs and appointment of safety officers were found to be the most effective programs in improving OSH, resulting in an over 80% reduction in accidents from 2010-2014.
This document provides guidelines for small-scale miners in South Africa to help them comply with health and safety requirements. It includes a self-assessment tool to help mine owners evaluate their existing health and safety management. The guidelines are intended to encourage dialogue on health and safety and promote a positive safety culture. The document defines small-scale mining and provides an overview of an occupational health and safety management system based on the ILO's Plan-Do-Check-Act model. It outlines the legislative requirements and provides topic-specific guidelines on various health and safety issues.
This document summarizes a research study that assessed risk management practices in the logistics and construction industries regarding human safety. The study found that worker training was the most critical factor for improving safety based on a survey of employees. Ensuring safety compliance and adequate communication about safety procedures were also important. The study recommends that companies provide regular safety training and incentives, maintain accident records, and compensate workers for injuries to improve safety culture. Overall, the research indicates a relationship between worker safety initiatives like training and better safety management practices in these high-risk industries.
IRJET- Deterrence Theory for Evaluating Information Security Factors in E-Hea...IRJET Journal
This document analyzes factors affecting the adoption of electronic health (e-health) systems using deterrence theory. It introduces e-health systems and proposes a theoretical model to test the impact of organizational factors like deterrent efforts, severity of consequences, and preventive efforts as well as individual factors like perceived security threats and awareness on intentions to proactively use e-health. An empirical study found that deterrent efforts and severity had no significant influence while preventive efforts were important. The document thus suggests organizations focus on preventive efforts like security solutions and awareness while reducing perceived threats.
1
3
Sun Coast Remediation Project
Michell Muldrow
Columbia Southern University
Research Methods
Dr. Senft
November 17, 2021
Table of Contents
Contents
Executive Summary 4
1.0 Introduction 5
1.1. Statement of Problems 5
1.1.1. Particulate Matter (PM) 5
1.1.2. Safety Training Effectiveness 6
1.1.3. Sound-Level Exposure 6
1.1.4. New Employee Training 6
1.1.5. Lead Exposure 7
1.1.6. Return-On-Investment 7
2.0. Literature Review 7
2.1. Particulate Matter (PM) Article 7
2.2. Safety Training Effectiveness 8
2.3. Sound-Level Exposure 9
2.4. New Employee Training 9
2.5. Lead Exposure 10
2.6. Return on Investment 10
3.0. Research Objectives, Research Questions, and Hypotheses 11
4.0. Research Methodology, Design, and Methods 14
4.1. Research Methodology 14
4.2. Research Design 14
4.3. Research Methods 15
4.3.1. Data Collection Methods 15
4.3.2. Sampling Design 15
5.0. Data Analysis Procedures 16
5.1. Data Analysis: Descriptive Statistics and Assumption Testing 17
5.1.2.1. Frequency Distribution Table 20
5.1.3.1. Frequency Distribution Table 22
5.1.4.1. Frequency Distribution Table 26
Testing 30
6.0. Findings and Recommendation 42
6.1. Findings 42
6.2. Recommendations 43
6.2.1. Particulate Matter Recommendation 43
6.2.2. Safety Training Effectiveness Recommendation 43
6.2.3. Sound-Level Exposure Recommendation 43
6.2.4. New Employee Training Recommendation 44
6.2.5. Lead Exposure Recommendation. 44
6.2.6. Return on Investment Recommendation 44
References 45
Executive Summary
Business executives are primarily concerned about the strategies to adopt to increase business transactions. Therefore, they screen various aspects to determine the critical areas that require to be solved using the business research method. The senior leaders at Sun Coast want to see the projects conducted to completion.
The paper comprises sections such as data collection, generating statements of problems, literature review, research objectives, research questions and hypothesis, methodology, design and methods, data analysis, finding, and recommendation.
1.0 Introduction
Senior leadership at Sun Coast has identified several areas for concern that they believe could be solved using business research methods. The previous director was tasked with researching to help provide information to make decisions about these issues. Although data were collected, the project was never completed. Senior leadership is interested in seeing the project through to fruition. The following is the completion of that project and includes a statement of the problems, literature review, research objectives, research questions and hypotheses, research methodology, design and methods, data analysis, findings, and recommendations. 1.1. Statement of Problems
Six business problems were identified:
1.1.1. Particulate Matter (PM)
There is a concern that job-site particle pollution is adversely impacting employee health. Although respirators are required in certain environments, particulate mat ...
1
3
Sun Coast Remediation Project
Michell Muldrow
Columbia Southern University
Research Methods
Dr. Senft
November 17, 2021
Table of Contents
Contents
Executive Summary 4
1.0 Introduction 5
1.1. Statement of Problems 5
1.1.1. Particulate Matter (PM) 5
1.1.2. Safety Training Effectiveness 6
1.1.3. Sound-Level Exposure 6
1.1.4. New Employee Training 6
1.1.5. Lead Exposure 7
1.1.6. Return-On-Investment 7
2.0. Literature Review 7
2.1. Particulate Matter (PM) Article 7
2.2. Safety Training Effectiveness 8
2.3. Sound-Level Exposure 9
2.4. New Employee Training 9
2.5. Lead Exposure 10
2.6. Return on Investment 10
3.0. Research Objectives, Research Questions, and Hypotheses 11
4.0. Research Methodology, Design, and Methods 14
4.1. Research Methodology 14
4.2. Research Design 14
4.3. Research Methods 15
4.3.1. Data Collection Methods 15
4.3.2. Sampling Design 15
5.0. Data Analysis Procedures 16
5.1. Data Analysis: Descriptive Statistics and Assumption Testing 17
5.1.2.1. Frequency Distribution Table 20
5.1.3.1. Frequency Distribution Table 22
5.1.4.1. Frequency Distribution Table 26
Testing 30
6.0. Findings and Recommendation 42
6.1. Findings 42
6.2. Recommendations 43
6.2.1. Particulate Matter Recommendation 43
6.2.2. Safety Training Effectiveness Recommendation 43
6.2.3. Sound-Level Exposure Recommendation 43
6.2.4. New Employee Training Recommendation 44
6.2.5. Lead Exposure Recommendation. 44
6.2.6. Return on Investment Recommendation 44
References 45
Executive Summary
Business executives are primarily concerned about the strategies to adopt to increase business transactions. Therefore, they screen various aspects to determine the critical areas that require to be solved using the business research method. The senior leaders at Sun Coast want to see the projects conducted to completion.
The paper comprises sections such as data collection, generating statements of problems, literature review, research objectives, research questions and hypothesis, methodology, design and methods, data analysis, finding, and recommendation.
1.0 Introduction
Senior leadership at Sun Coast has identified several areas for concern that they believe could be solved using business research methods. The previous director was tasked with researching to help provide information to make decisions about these issues. Although data were collected, the project was never completed. Senior leadership is interested in seeing the project through to fruition. The following is the completion of that project and includes a statement of the problems, literature review, research objectives, research questions and hypotheses, research methodology, design and methods, data analysis, findings, and recommendations. 1.1. Statement of Problems
Six business problems were identified:
1.1.1. Particulate Matter (PM)
There is a concern that job-site particle pollution is adversely impacting employee health. Although respirators are required in certain environments, particulate mat ...
This work presents the results of a case study and describes an important area within the field of con-struction safety management, namely behavior-based safety (BBS). This paper adopts and develops amanagement approach for safety improvements in construction site environments. A rigorous behav-ioral safety system and its intervention program was implemented and deployed on target constructionsites. After taking a few weeks of safety behavior measurements, the project management team imple-mented the designed intervention and measurements were taken. Goal-setting sessions were arrangedon-site with workers’ participation to set realistic and attainable targets of performance. Safety per-formance measurements continued and the levels of performance and the targets were presented onfeedback charts. Supervisors were asked to give workers recognition and praise when they acted safelyor improved critical behaviors. Observers were requested to have discussions with workers, visit the site,distribute training materials to workers, and provide feedback to crews and display charts. They wererequired to talk to operatives in the presence of line managers. It was necessary to develop awareness andunderstanding of what was being measured. In the process, operatives learned how to act safely whenconducting site tasks using the designed checklists. Current weekly scores were discussed in the weeklysafety meetings and other operational site meetings with emphasis on how to achieve set targets. Thereliability of the safety performance measures taken by the company’s observers was monitored. A clearincrease in safety performance level was achieved across all categories: personal protective equipment;housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scoresof safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the9th week. The results of intervention demonstrated large decreases in unsafe behaviors and significantincreases in safe behaviors. The results of this case study showed that an approach based on goal setting,feedback, and an effective measure of safety behavior if properly applied by committed management,can improve safety performance significantly in construction site environments. The results proved thatthe BBS management technique can be applied to any country’s culture, showing that it would be a goodapproach for improving the safety of front-line workers and that it has industry wide application forongoing construction projects.
This document summarizes a research article that examines how three contextual factors - plant size, age, and unionization status - influence the implementation of lean manufacturing practices. It identifies 22 key lean practices and groups them into four "bundles" - just-in-time (JIT), total quality management (TQM), total preventive maintenance (TPM), and human resource management (HRM). The study finds that plant size has a strong influence on lean implementation, while the effects of age and unionization are less significant. It also shows that implementing lean practice bundles contributes substantially to operational performance, explaining around 23% of the variation in performance outcomes.
This document summarizes a research project on evaluating and improving facilities compliance with OSHA's ergonomic regulations in the manufacturing industry. The research contains five chapters: introduction, literature review, methodology, data collection, and data analysis. The introduction discusses the objectives, which are to understand and implement the regulations, construct an assessment guide, and analyze the efficiency and benefits. The scope is a case study of a manufacturing company assessing noise levels, indoor air quality, and illumination.
This document summarizes risk analysis methods that can be used to identify and prevent occupational health and safety risks in mineral processing plants. It applies the Fine-Kinney and fault tree analysis methods to potential risks in ore dressing plants. Fine-Kinney analysis quantitatively evaluates risks based on the probability and severity of hazards. Fault tree analysis uses logic diagrams to identify causes of unwanted events. The analyses identified working with chemicals and radioactive materials as high-risk activities. Personal protective equipment and automation were recommended to mitigate risks. Wet processing and noise reduction measures were also suggested.
The document discusses a study on corporate social responsibility (CSR) in the UK nanotechnology industry. It conducted an online survey of 78 nanotechnology companies on their CSR reporting and conducted 15 interviews with company representatives on their attitudes towards CSR. The study found that the general level of CSR reporting among nanotechnology companies is low, though companies demonstrated awareness of minimizing risks ("do no harm" model of CSR). For CSR to help build adaptive governance of nanotechnology, the study argues serious shortcomings need addressing to move companies closer to seeing CSR as creating positive social value. The conceptual framework examined continuous improvement in CSR and different "modes" of CSR (minimizing risks versus creating social value).
This document provides a literature review on global occupational safety and health practices and the severity of accidents. It discusses the following key points in 3 sentences:
The literature review identifies existing gaps in previous workplace safety and health management research and proposes areas for future study. Many studies have found that risks to occupational safety and health are increasing globally due to industrialization, but developing countries often overlook workplace safety in their economic policies. The review finds gaps in developing multilevel safety models, knowledge transfer mechanisms, and approaches that consider multiple health factors, and suggests these areas need further research to improve workplace safety and health management.
A LITERATURE REVIEW ON GLOBAL OCCUPATIONAL SAFETY AND HEALTH PRACTICE ACCID...Justin Knight
This document provides a literature review on global occupational safety and health practices and the severity of accidents. It discusses the following key points in 3 sentences:
The literature review identifies existing gaps in previous workplace safety and health management research and proposes areas for future study. Many studies have found that risks to occupational safety and health are increasing globally due to industrialization, but developing countries often overlook workplace safety in their economic policies. The review finds gaps in developing multilevel safety models, knowledge transfer mechanisms, and approaches that consider multiple health factors, and suggests these areas need further research to improve workplace safety and health management.
This document summarizes a study that assessed awareness of occupational safety and health (OSH) among students and staff at Universiti Teknologi Malaysia (UTM). A survey was conducted of 50 respondents, with equal numbers of students and staff. The survey examined 7 factors related to OSH awareness: safety policy, procedure, training, tools/equipment, committee, commitment/attitude, and environment.
The results found that overall OSH awareness was high, with a mean grade of 4.20 out of 5. Awareness of safety policy had the highest mean grade. Staff had slightly higher overall awareness than students. However, awareness of the safety committee was the lowest, indicating more can be done to
This document provides a comprehensive literature review on the causes of accidents in industries, with a focus on three primary factors: human factors, work environment, and management.
The review examines numerous studies that have investigated: (1) how human errors are a leading cause of accidents due to factors like behavior, training and motivation; (2) how the physical work environment and safety protocols can influence accident frequency; and (3) how management decisions around issues like procedures, communication and leadership impact workplace safety culture. The literature demonstrates that accidents typically result from complex interactions among human, environmental and management factors, and emphasizes the need for organizations to adopt comprehensive prevention strategies that consider all of these dimensions.
Behaviour Based Safety Approach in ShipyardIRJET Journal
This document summarizes a study on implementing a Behaviour Based Safety (BBS) approach in a shipyard in South India. The study involved observing 15 workers (10 grinding workers and 5 forklift operators) to identify critical unsafe behaviors. Checklists were developed and workers were observed and given daily feedback. Over 8 weeks, the percentage of observed safe behaviors increased while unsafe behaviors decreased for both groups. For grinding workers, the safety index improved from 43% to 88%, while for forklift operators it increased from 49% to 89%. The results suggest BBS is an effective method for improving safety performance in shipyards by modifying worker behaviors.
The document provides an overview of the evolution of nuclear safety culture standards and WANO's process for reviewing nuclear safety culture. It discusses:
1) Key events that led to the development of nuclear safety culture standards, including the Chernobyl accident and Davis-Besse event. This resulted in INPO establishing 8 principles for nuclear safety culture in 2004 and WANO developing its own principles in 2006.
2) In 2011, INPO, WANO and the NRC agreed on 10 nuclear safety culture traits that were incorporated into WANO's peer review program standards.
3) WANO reviews nuclear operators based on these 10 traits which are categorized into individual commitment, management commitment, and organizational systems aspects of
Safety ManagementSafety Management
O
Management of
Change
A key to safety—not just process safety
By Mark D. Hansen and Gerald W. Gammel
www.asse.org OCTOBER 2008 PROFESSIONAL SAFETY 41
ON NOV. 25, 1998, a fire at the Equilon Enterprises oil
refinery delayed coking unit in Anacortes, WA, caused
six fatalities. A loss of electric power and steam supply
approximately 37 hours before the fire had resulted in
abnormal process conditions (CSB, 2001).
The investigation revealed that personnel had
expected a tarry mass to drain from the drum. [A
drum is a tower or vessel in which materials are
processed, heated or stored. Coke drums can be very
large (e.g., 120 ft tall with a 29 ft diameter) and typi-
cally stand several stories high.] The supervisor had
directed that the drum be opened with a minimum
number of people present. In response to concerns
that the limited flow of steam might not sufficiently
strip all the toxic compounds from the tar inside the
vessel, workers removing the bolts on the drum heads
were required to wear self-contained breathing appa-
ratuses. The top head was unbolted and lifted from
the drum. The bottom head was also unbolted and
held in place by a hydraulic dolly. The operator then
activated a release mechanism to lower the dolly.
Witnesses reported hearing a whooshing sound
and seeing a white cloud of vapor emanate from the
bottom of the drum. The hot petroleum vapor burst
into flames. The process supervisor, an operator and
the four contract personnel assisting were caught in
the fire and died (CSB, 2001). After the incident,
Equilon relocated the controls for the hydraulic
dolly to allow workers to position themselves far-
ther from a drum when opening it (CSB).
Lessons Learned
Why examine this accident? Because it illustrates
the need for management of change (MOC). MOC is
critical to process safety—and it is a concept that if
well implemented could likely prevent incidents in
many other industries as well. Many industries
would benefit from establishing policies to manage
deviations from normal operations. Systematic
methods for managing change are sometimes
applied to physical alterations, such as those that
occur when an interlock is bypassed, new equip-
ment is added or a replacement is “not in kind.”
For an MOC system to function effectively, field
personnel must know how to recognize which devia-
tions are significant enough to trigger further review.
Thus, operating procedures must include well-de-
fined limits for process variables for all common tasks.
Once on-site personnel are trained on MOC policy
and are knowledgeable about normal limits for
process variables, they can make informed judgments
regarding when to apply the MOC system.
Once a deviation is identified that triggers the
MOC system, management must gather the right
people and resources to review the situation. A mul-
tidisciplinary team may be required to thoroughly
identify potential hazards, develop protective meas-
ures and propos.
Amelioration of safety management in infrastructure projectsIJERA Editor
Accidents are a major public health concern, resulting in an estimated 1.2 million deaths and 50 million injuries
worldwide each year specifically, the relationships between drivers' characteristics and road accidents are not
fully understood. Many factors are involved in the accident occurrence at construction site. Some important
elements that create a significant portion of accidents include: safety management error, poor training programs,
human element, act of god, outdated procedure and no clear monitoring policy. Although some of these items
are inevitable, but the occurrence of the largest part can be prevented. Therefore, for ameliorating the safety in a
project each of these items should be analyzed and a practical approach introduced. In general, near miss,
incident and accident are three dependent levels that mainly lead to injury. Risk and hazard are allocated in first
level which means near miss, therefore, no on-time identification of hazard and risk causes to create incident
and preventing accident in incident stage is unavoidable.
Bachelor of Science (Honours) Safety, Health and Environmental Man.docxwilcockiris
Bachelor of Science (Honours) Safety, Health and Environmental Management
Module: Understanding the Research Process (UTRP)
Proposed Research Topic:
“STUDY OF SAFETY CULTURE IMPLEMENTATION: CASE STUDY OF SAFETY CONSULTANCY PROSAFE PTE. LTD.”
Submitted By :
Fin No : G7228033X
Student ID : 77189773
Batch : BSHE21702A
(UNDERSTANDING THE RESEARCH PROCESS_UTRP)
Lecture(s) :
Abstract
The aim behind this research is to understand the safety culture in the construction and field. The purpose is to understand the extent of successful infusion of culture versus outcome. We need to understand how the research can assist with future implementation and intervention with regards to this industry.
Acknowledgements
This research will be having participation from the management and organization staffs. A big thank you to our safety worker Mr. Aksarul, safety supervisor Mr. Sheak and Safety Training Manager Mr. Faizul, who was involved in the process of research for their invaluable input, which was necessary for the successful completion of this project. Especially thank for Mr. Rosman Abdul Halek for assistance with the lectures on Understanding the Research Process (UTRP) and for the comments that greatly improved the research.
Table of content
Abstract
Acknowledgements
Chapter 1: Introduction
a. Background
b. Current problem
c. Research question
d. Research objective(s)
e.Research hypotheses
f. Definition of terms
g. Past related research articles (at least 20)
g.1 table of past research articles / journals
(use table with columns of title of article, publication number & publication date, description of
article, difference between your research and article) (20 articles)
h. Rationale of research and research ethics
Chapter 2: Literature Review
a. Concept of Safety Culture
b. Statistics of Injuries on Safety Culture
c. Effects of Working With Poor Safety Culture
d. Types of Safety Cultural Injuries
e. Types of measurements on Safety Culture
Chapter 3: Research Methodology
a. Types of Research Method
b. Respondents Analysis
c. Technique of Data Collection
d. Technique of Data Analysis
Chapter 4: Project Costing & Timeline
a. Project Costing
b. Project Schedule
Chapter 5: Study Two
Chapter 6: Study Three
Chapter 7: Conclusion & Recommendation
a. Conclusion
b. Recommendation
Bibliography
Appendixes
Chapter 1: Introduction
Here in this chapter, we will discuss the introductory phase and look at the background to occupational safety and health. This will include the application of the processes to the direct reduction in incidents and accidents. Thereafter, we will tackle the research aims and objectives.
a. Background
Hundreds and perhaps even thousands of people suffer from injuries both minor and major throughout all industries. These effec.
- The document discusses health hazards and safety measures among workers in cement industries in the Niger Delta region of Nigeria. It identifies several physical hazards workers face such as excessive heat, poor ventilation, radiation, and noise. Workers are also exposed to cement dust which can cause respiratory issues.
- The study found that while safety regulations have been implemented, workers still face many occupational hazards that can negatively impact their health. It recommends cement industry management develop and strictly enforce safety frameworks, implement health promotion programs for workers, and conduct regular medical exams to reduce health issues.
Awareness of Construction Workers on Occupational Hazards, Illness and Injuri...iosrjce
IOSR Journal of Nursing and health Science is ambitious to disseminate information and experience in education, practice and investigation between medicine, nursing and all the sciences involved in health care. Nursing & Health Sciences focuses on the international exchange of knowledge in nursing and health sciences. The journal publishes peer-reviewed papers on original research, education and clinical practice.
By encouraging scholars from around the world to share their knowledge and expertise, the journal aims to provide the reader with a deeper understanding of the lived experience of nursing and health sciences and the opportunity to enrich their own area of practice. The journal publishes original papers, reviews, special and general articles, case management etc.
This document summarizes a journal article that examines safety management practices at construction sites in Malaysia. It begins by outlining some key safety issues and accidents that have occurred at Malaysian construction sites in recent years. It then reviews literature on common safety practices at construction sites, such as having a safety policy, providing training, conducting safety inspections, and using personal protective equipment. However, the article notes there are also problems with safety practices, such as workers lacking awareness of safety procedures, insufficient budgets allocated for safety management, and language barriers. The objectives of the research were to examine current safety practices, identify related problems, and suggest strategies to address the problems.
Sustainable transportation indicators are measurement tools that can help assess how sustainable infrastructure projects are. Some key indicators relate to the economic, environmental, social, and technical dimensions of sustainability. For the economic dimension, common indicators include impact on the economy, willingness to pay, affordability, costs, and financial factors. Environmental indicators may track pollution, waste generation, ecological impacts, and climate emissions. Social indicators can include employment, health, safety, public participation, and cultural heritage. Technical indicators assess performance, reliability, durability, flexibility, resilience, and vulnerability of the transportation system. Sustainable indicators aim to simplify complex sustainability assessments and support decision-making around transportation planning and projects.
THE EVALUATION OF FACTORS INFLUENCING SAFETY PERFORMANCE: A CASE IN AN INDUST...IJDKP
Safety has become a very important element in firms and organisations especially in Ghana. The impact of safety factors on a firm’s 3E’s (Employee, Environment and Equipment) can improve or deteriorate firm’s public image. This paper identified the key safety indicators and also provided a set of core factors that contribute meaningful in promoting safety performance in an Industrial Gas producer in Ghana using the Analytic Hierarchy Process. Organisational, Human, Technical and Environmental factors were identified as the safety indicators in relation to the study area. The studies revealed that organisational factor is the most important factor or criterion that could facilitate a better safety performance of the Industrial Gas
Company. In addition, employees was identified the best safety alternative, whilst environment and equipment followed sequentially.
Site Safety Management and planning for Building ConstructionAbu Yousuf Jamil
This is a technical paper or journal on "Construction Safety " . This paper is written about site safety management and planning for Building Construction . I hope that the paper will help people (Engineers or Contractors) to study construction safety related problems and if they falls to any construction safety related problems ,they will easily solve these problems following the planning, methods and regulations which are easily described in the paper. If this paper will help yours, i will be successful..
This paper is also selected,prized and published in a magazine in the event "BUILtech Fest - 2016" jointly organizing by the Department of Building Engineering and Construction Management(BECM);KUET and Institution of Civil Engineers(ICE) Center -Bangladesh
Know the difference between Endodontics and Orthodontics.Gokuldas Hospital
Your smile is beautiful.
Let’s be honest. Maintaining that beautiful smile is not an easy task. It is more than brushing and flossing. Sometimes, you might encounter dental issues that need special dental care. These issues can range anywhere from misalignment of the jaw to pain in the root of teeth.
This document summarizes a research article that examines how three contextual factors - plant size, age, and unionization status - influence the implementation of lean manufacturing practices. It identifies 22 key lean practices and groups them into four "bundles" - just-in-time (JIT), total quality management (TQM), total preventive maintenance (TPM), and human resource management (HRM). The study finds that plant size has a strong influence on lean implementation, while the effects of age and unionization are less significant. It also shows that implementing lean practice bundles contributes substantially to operational performance, explaining around 23% of the variation in performance outcomes.
This document summarizes a research project on evaluating and improving facilities compliance with OSHA's ergonomic regulations in the manufacturing industry. The research contains five chapters: introduction, literature review, methodology, data collection, and data analysis. The introduction discusses the objectives, which are to understand and implement the regulations, construct an assessment guide, and analyze the efficiency and benefits. The scope is a case study of a manufacturing company assessing noise levels, indoor air quality, and illumination.
This document summarizes risk analysis methods that can be used to identify and prevent occupational health and safety risks in mineral processing plants. It applies the Fine-Kinney and fault tree analysis methods to potential risks in ore dressing plants. Fine-Kinney analysis quantitatively evaluates risks based on the probability and severity of hazards. Fault tree analysis uses logic diagrams to identify causes of unwanted events. The analyses identified working with chemicals and radioactive materials as high-risk activities. Personal protective equipment and automation were recommended to mitigate risks. Wet processing and noise reduction measures were also suggested.
The document discusses a study on corporate social responsibility (CSR) in the UK nanotechnology industry. It conducted an online survey of 78 nanotechnology companies on their CSR reporting and conducted 15 interviews with company representatives on their attitudes towards CSR. The study found that the general level of CSR reporting among nanotechnology companies is low, though companies demonstrated awareness of minimizing risks ("do no harm" model of CSR). For CSR to help build adaptive governance of nanotechnology, the study argues serious shortcomings need addressing to move companies closer to seeing CSR as creating positive social value. The conceptual framework examined continuous improvement in CSR and different "modes" of CSR (minimizing risks versus creating social value).
This document provides a literature review on global occupational safety and health practices and the severity of accidents. It discusses the following key points in 3 sentences:
The literature review identifies existing gaps in previous workplace safety and health management research and proposes areas for future study. Many studies have found that risks to occupational safety and health are increasing globally due to industrialization, but developing countries often overlook workplace safety in their economic policies. The review finds gaps in developing multilevel safety models, knowledge transfer mechanisms, and approaches that consider multiple health factors, and suggests these areas need further research to improve workplace safety and health management.
A LITERATURE REVIEW ON GLOBAL OCCUPATIONAL SAFETY AND HEALTH PRACTICE ACCID...Justin Knight
This document provides a literature review on global occupational safety and health practices and the severity of accidents. It discusses the following key points in 3 sentences:
The literature review identifies existing gaps in previous workplace safety and health management research and proposes areas for future study. Many studies have found that risks to occupational safety and health are increasing globally due to industrialization, but developing countries often overlook workplace safety in their economic policies. The review finds gaps in developing multilevel safety models, knowledge transfer mechanisms, and approaches that consider multiple health factors, and suggests these areas need further research to improve workplace safety and health management.
This document summarizes a study that assessed awareness of occupational safety and health (OSH) among students and staff at Universiti Teknologi Malaysia (UTM). A survey was conducted of 50 respondents, with equal numbers of students and staff. The survey examined 7 factors related to OSH awareness: safety policy, procedure, training, tools/equipment, committee, commitment/attitude, and environment.
The results found that overall OSH awareness was high, with a mean grade of 4.20 out of 5. Awareness of safety policy had the highest mean grade. Staff had slightly higher overall awareness than students. However, awareness of the safety committee was the lowest, indicating more can be done to
This document provides a comprehensive literature review on the causes of accidents in industries, with a focus on three primary factors: human factors, work environment, and management.
The review examines numerous studies that have investigated: (1) how human errors are a leading cause of accidents due to factors like behavior, training and motivation; (2) how the physical work environment and safety protocols can influence accident frequency; and (3) how management decisions around issues like procedures, communication and leadership impact workplace safety culture. The literature demonstrates that accidents typically result from complex interactions among human, environmental and management factors, and emphasizes the need for organizations to adopt comprehensive prevention strategies that consider all of these dimensions.
Behaviour Based Safety Approach in ShipyardIRJET Journal
This document summarizes a study on implementing a Behaviour Based Safety (BBS) approach in a shipyard in South India. The study involved observing 15 workers (10 grinding workers and 5 forklift operators) to identify critical unsafe behaviors. Checklists were developed and workers were observed and given daily feedback. Over 8 weeks, the percentage of observed safe behaviors increased while unsafe behaviors decreased for both groups. For grinding workers, the safety index improved from 43% to 88%, while for forklift operators it increased from 49% to 89%. The results suggest BBS is an effective method for improving safety performance in shipyards by modifying worker behaviors.
The document provides an overview of the evolution of nuclear safety culture standards and WANO's process for reviewing nuclear safety culture. It discusses:
1) Key events that led to the development of nuclear safety culture standards, including the Chernobyl accident and Davis-Besse event. This resulted in INPO establishing 8 principles for nuclear safety culture in 2004 and WANO developing its own principles in 2006.
2) In 2011, INPO, WANO and the NRC agreed on 10 nuclear safety culture traits that were incorporated into WANO's peer review program standards.
3) WANO reviews nuclear operators based on these 10 traits which are categorized into individual commitment, management commitment, and organizational systems aspects of
Safety ManagementSafety Management
O
Management of
Change
A key to safety—not just process safety
By Mark D. Hansen and Gerald W. Gammel
www.asse.org OCTOBER 2008 PROFESSIONAL SAFETY 41
ON NOV. 25, 1998, a fire at the Equilon Enterprises oil
refinery delayed coking unit in Anacortes, WA, caused
six fatalities. A loss of electric power and steam supply
approximately 37 hours before the fire had resulted in
abnormal process conditions (CSB, 2001).
The investigation revealed that personnel had
expected a tarry mass to drain from the drum. [A
drum is a tower or vessel in which materials are
processed, heated or stored. Coke drums can be very
large (e.g., 120 ft tall with a 29 ft diameter) and typi-
cally stand several stories high.] The supervisor had
directed that the drum be opened with a minimum
number of people present. In response to concerns
that the limited flow of steam might not sufficiently
strip all the toxic compounds from the tar inside the
vessel, workers removing the bolts on the drum heads
were required to wear self-contained breathing appa-
ratuses. The top head was unbolted and lifted from
the drum. The bottom head was also unbolted and
held in place by a hydraulic dolly. The operator then
activated a release mechanism to lower the dolly.
Witnesses reported hearing a whooshing sound
and seeing a white cloud of vapor emanate from the
bottom of the drum. The hot petroleum vapor burst
into flames. The process supervisor, an operator and
the four contract personnel assisting were caught in
the fire and died (CSB, 2001). After the incident,
Equilon relocated the controls for the hydraulic
dolly to allow workers to position themselves far-
ther from a drum when opening it (CSB).
Lessons Learned
Why examine this accident? Because it illustrates
the need for management of change (MOC). MOC is
critical to process safety—and it is a concept that if
well implemented could likely prevent incidents in
many other industries as well. Many industries
would benefit from establishing policies to manage
deviations from normal operations. Systematic
methods for managing change are sometimes
applied to physical alterations, such as those that
occur when an interlock is bypassed, new equip-
ment is added or a replacement is “not in kind.”
For an MOC system to function effectively, field
personnel must know how to recognize which devia-
tions are significant enough to trigger further review.
Thus, operating procedures must include well-de-
fined limits for process variables for all common tasks.
Once on-site personnel are trained on MOC policy
and are knowledgeable about normal limits for
process variables, they can make informed judgments
regarding when to apply the MOC system.
Once a deviation is identified that triggers the
MOC system, management must gather the right
people and resources to review the situation. A mul-
tidisciplinary team may be required to thoroughly
identify potential hazards, develop protective meas-
ures and propos.
Amelioration of safety management in infrastructure projectsIJERA Editor
Accidents are a major public health concern, resulting in an estimated 1.2 million deaths and 50 million injuries
worldwide each year specifically, the relationships between drivers' characteristics and road accidents are not
fully understood. Many factors are involved in the accident occurrence at construction site. Some important
elements that create a significant portion of accidents include: safety management error, poor training programs,
human element, act of god, outdated procedure and no clear monitoring policy. Although some of these items
are inevitable, but the occurrence of the largest part can be prevented. Therefore, for ameliorating the safety in a
project each of these items should be analyzed and a practical approach introduced. In general, near miss,
incident and accident are three dependent levels that mainly lead to injury. Risk and hazard are allocated in first
level which means near miss, therefore, no on-time identification of hazard and risk causes to create incident
and preventing accident in incident stage is unavoidable.
Bachelor of Science (Honours) Safety, Health and Environmental Man.docxwilcockiris
Bachelor of Science (Honours) Safety, Health and Environmental Management
Module: Understanding the Research Process (UTRP)
Proposed Research Topic:
“STUDY OF SAFETY CULTURE IMPLEMENTATION: CASE STUDY OF SAFETY CONSULTANCY PROSAFE PTE. LTD.”
Submitted By :
Fin No : G7228033X
Student ID : 77189773
Batch : BSHE21702A
(UNDERSTANDING THE RESEARCH PROCESS_UTRP)
Lecture(s) :
Abstract
The aim behind this research is to understand the safety culture in the construction and field. The purpose is to understand the extent of successful infusion of culture versus outcome. We need to understand how the research can assist with future implementation and intervention with regards to this industry.
Acknowledgements
This research will be having participation from the management and organization staffs. A big thank you to our safety worker Mr. Aksarul, safety supervisor Mr. Sheak and Safety Training Manager Mr. Faizul, who was involved in the process of research for their invaluable input, which was necessary for the successful completion of this project. Especially thank for Mr. Rosman Abdul Halek for assistance with the lectures on Understanding the Research Process (UTRP) and for the comments that greatly improved the research.
Table of content
Abstract
Acknowledgements
Chapter 1: Introduction
a. Background
b. Current problem
c. Research question
d. Research objective(s)
e.Research hypotheses
f. Definition of terms
g. Past related research articles (at least 20)
g.1 table of past research articles / journals
(use table with columns of title of article, publication number & publication date, description of
article, difference between your research and article) (20 articles)
h. Rationale of research and research ethics
Chapter 2: Literature Review
a. Concept of Safety Culture
b. Statistics of Injuries on Safety Culture
c. Effects of Working With Poor Safety Culture
d. Types of Safety Cultural Injuries
e. Types of measurements on Safety Culture
Chapter 3: Research Methodology
a. Types of Research Method
b. Respondents Analysis
c. Technique of Data Collection
d. Technique of Data Analysis
Chapter 4: Project Costing & Timeline
a. Project Costing
b. Project Schedule
Chapter 5: Study Two
Chapter 6: Study Three
Chapter 7: Conclusion & Recommendation
a. Conclusion
b. Recommendation
Bibliography
Appendixes
Chapter 1: Introduction
Here in this chapter, we will discuss the introductory phase and look at the background to occupational safety and health. This will include the application of the processes to the direct reduction in incidents and accidents. Thereafter, we will tackle the research aims and objectives.
a. Background
Hundreds and perhaps even thousands of people suffer from injuries both minor and major throughout all industries. These effec.
- The document discusses health hazards and safety measures among workers in cement industries in the Niger Delta region of Nigeria. It identifies several physical hazards workers face such as excessive heat, poor ventilation, radiation, and noise. Workers are also exposed to cement dust which can cause respiratory issues.
- The study found that while safety regulations have been implemented, workers still face many occupational hazards that can negatively impact their health. It recommends cement industry management develop and strictly enforce safety frameworks, implement health promotion programs for workers, and conduct regular medical exams to reduce health issues.
Awareness of Construction Workers on Occupational Hazards, Illness and Injuri...iosrjce
IOSR Journal of Nursing and health Science is ambitious to disseminate information and experience in education, practice and investigation between medicine, nursing and all the sciences involved in health care. Nursing & Health Sciences focuses on the international exchange of knowledge in nursing and health sciences. The journal publishes peer-reviewed papers on original research, education and clinical practice.
By encouraging scholars from around the world to share their knowledge and expertise, the journal aims to provide the reader with a deeper understanding of the lived experience of nursing and health sciences and the opportunity to enrich their own area of practice. The journal publishes original papers, reviews, special and general articles, case management etc.
This document summarizes a journal article that examines safety management practices at construction sites in Malaysia. It begins by outlining some key safety issues and accidents that have occurred at Malaysian construction sites in recent years. It then reviews literature on common safety practices at construction sites, such as having a safety policy, providing training, conducting safety inspections, and using personal protective equipment. However, the article notes there are also problems with safety practices, such as workers lacking awareness of safety procedures, insufficient budgets allocated for safety management, and language barriers. The objectives of the research were to examine current safety practices, identify related problems, and suggest strategies to address the problems.
Sustainable transportation indicators are measurement tools that can help assess how sustainable infrastructure projects are. Some key indicators relate to the economic, environmental, social, and technical dimensions of sustainability. For the economic dimension, common indicators include impact on the economy, willingness to pay, affordability, costs, and financial factors. Environmental indicators may track pollution, waste generation, ecological impacts, and climate emissions. Social indicators can include employment, health, safety, public participation, and cultural heritage. Technical indicators assess performance, reliability, durability, flexibility, resilience, and vulnerability of the transportation system. Sustainable indicators aim to simplify complex sustainability assessments and support decision-making around transportation planning and projects.
THE EVALUATION OF FACTORS INFLUENCING SAFETY PERFORMANCE: A CASE IN AN INDUST...IJDKP
Safety has become a very important element in firms and organisations especially in Ghana. The impact of safety factors on a firm’s 3E’s (Employee, Environment and Equipment) can improve or deteriorate firm’s public image. This paper identified the key safety indicators and also provided a set of core factors that contribute meaningful in promoting safety performance in an Industrial Gas producer in Ghana using the Analytic Hierarchy Process. Organisational, Human, Technical and Environmental factors were identified as the safety indicators in relation to the study area. The studies revealed that organisational factor is the most important factor or criterion that could facilitate a better safety performance of the Industrial Gas
Company. In addition, employees was identified the best safety alternative, whilst environment and equipment followed sequentially.
Site Safety Management and planning for Building ConstructionAbu Yousuf Jamil
This is a technical paper or journal on "Construction Safety " . This paper is written about site safety management and planning for Building Construction . I hope that the paper will help people (Engineers or Contractors) to study construction safety related problems and if they falls to any construction safety related problems ,they will easily solve these problems following the planning, methods and regulations which are easily described in the paper. If this paper will help yours, i will be successful..
This paper is also selected,prized and published in a magazine in the event "BUILtech Fest - 2016" jointly organizing by the Department of Building Engineering and Construction Management(BECM);KUET and Institution of Civil Engineers(ICE) Center -Bangladesh
Know the difference between Endodontics and Orthodontics.Gokuldas Hospital
Your smile is beautiful.
Let’s be honest. Maintaining that beautiful smile is not an easy task. It is more than brushing and flossing. Sometimes, you might encounter dental issues that need special dental care. These issues can range anywhere from misalignment of the jaw to pain in the root of teeth.
Cell Therapy Expansion and Challenges in Autoimmune DiseaseHealth Advances
There is increasing confidence that cell therapies will soon play a role in the treatment of autoimmune disorders, but the extent of this impact remains to be seen. Early readouts on autologous CAR-Ts in lupus are encouraging, but manufacturing and cost limitations are likely to restrict access to highly refractory patients. Allogeneic CAR-Ts have the potential to broaden access to earlier lines of treatment due to their inherent cost benefits, however they will need to demonstrate comparable or improved efficacy to established modalities.
In addition to infrastructure and capacity constraints, CAR-Ts face a very different risk-benefit dynamic in autoimmune compared to oncology, highlighting the need for tolerable therapies with low adverse event risk. CAR-NK and Treg-based therapies are also being developed in certain autoimmune disorders and may demonstrate favorable safety profiles. Several novel non-cell therapies such as bispecific antibodies, nanobodies, and RNAi drugs, may also offer future alternative competitive solutions with variable value propositions.
Widespread adoption of cell therapies will not only require strong efficacy and safety data, but also adapted pricing and access strategies. At oncology-based price points, CAR-Ts are unlikely to achieve broad market access in autoimmune disorders, with eligible patient populations that are potentially orders of magnitude greater than the number of currently addressable cancer patients. Developers have made strides towards reducing cell therapy COGS while improving manufacturing efficiency, but payors will inevitably restrict access until more sustainable pricing is achieved.
Despite these headwinds, industry leaders and investors remain confident that cell therapies are poised to address significant unmet need in patients suffering from autoimmune disorders. However, the extent of this impact on the treatment landscape remains to be seen, as the industry rapidly approaches an inflection point.
These lecture slides, by Dr Sidra Arshad, offer a simplified look into the mechanisms involved in the regulation of respiration:
Learning objectives:
1. Describe the organisation of respiratory center
2. Describe the nervous control of inspiration and respiratory rhythm
3. Describe the functions of the dorsal and respiratory groups of neurons
4. Describe the influences of the Pneumotaxic and Apneustic centers
5. Explain the role of Hering-Breur inflation reflex in regulation of inspiration
6. Explain the role of central chemoreceptors in regulation of respiration
7. Explain the role of peripheral chemoreceptors in regulation of respiration
8. Explain the regulation of respiration during exercise
9. Integrate the respiratory regulatory mechanisms
10. Describe the Cheyne-Stokes breathing
Study Resources:
1. Chapter 42, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 36, Ganong’s Review of Medical Physiology, 26th edition
3. Chapter 13, Human Physiology by Lauralee Sherwood, 9th edition
NAVIGATING THE HORIZONS OF TIME LAPSE EMBRYO MONITORING.pdfRahul Sen
Time-lapse embryo monitoring is an advanced imaging technique used in IVF to continuously observe embryo development. It captures high-resolution images at regular intervals, allowing embryologists to select the most viable embryos for transfer based on detailed growth patterns. This technology enhances embryo selection, potentially increasing pregnancy success rates.
The skin is the largest organ and its health plays a vital role among the other sense organs. The skin concerns like acne breakout, psoriasis, or anything similar along the lines, finding a qualified and experienced dermatologist becomes paramount.
Promoting Wellbeing - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Travel Clinic Cardiff: Health Advice for International TravelersNX Healthcare
Travel Clinic Cardiff offers comprehensive travel health services, including vaccinations, travel advice, and preventive care for international travelers. Our expert team ensures you are well-prepared and protected for your journey, providing personalized consultations tailored to your destination. Conveniently located in Cardiff, we help you travel with confidence and peace of mind. Visit us: www.nxhealthcare.co.uk
Nano-gold for Cancer Therapy chemistry investigatory projectSIVAVINAYAKPK
chemistry investigatory project
The development of nanogold-based cancer therapy could revolutionize oncology by providing a more targeted, less invasive treatment option. This project contributes to the growing body of research aimed at harnessing nanotechnology for medical applications, paving the way for future clinical trials and potential commercial applications.
Cancer remains one of the leading causes of death worldwide, prompting the need for innovative treatment methods. Nanotechnology offers promising new approaches, including the use of gold nanoparticles (nanogold) for targeted cancer therapy. Nanogold particles possess unique physical and chemical properties that make them suitable for drug delivery, imaging, and photothermal therapy.
Medical Quiz ( Online Quiz for API Meet 2024 ).pdf
Parand foster
1. 1
BEHAVIOURAL-BASED SAFETY IN THE MINERALS INDUSTRY:
A RESEARCH BASED METHODOLOGY CARRIED OUT
IN THE UK QUARRYING SECTOR
Anam Parand1
& Dr. Patrick Foster2
1
Research Assistant 2
Anglo-American Plc Lecturer in Mining Engineering
Camborne School of Mines, University of Exeter, Cornwall Campus, UK
ABSTRACT
Behavioural-based safety (BBS) initiatives have proved to be successful across a wide variety
of industries, through their unique bottom-up approach to health and safety management in
the workplace. Whilst BBS has been identified as a possible tool to break through the
accident plateau of the minerals industry, there is a lack of research into its effectiveness
within this industry. Moreover, certain procedures deemed to be essential for the success of
such an initiative appear incompatible with the industry’s organisational characteristics and
culture.
This paper will consider previous research on this subject and describe the Minerals Industry
funded research that has been trialling the behavioural approach’s applicability to the
minerals industry through implementation of a BBS programme into two UK quarry sites. An
outline of this process will describe the practical issues of applying the six-stage agenda to
the quarries and reveal the project results that indicate a promising picture for behavioural
safety for this sector. Early findings support an alternative form of behavioural measure that
draws upon a combination of self-report and traditional methods of observing others onsite,
which is more viable within this sector that comprises typically of a low number of employees
but many lone workers.
INTRODUCTION
There are approximately 3000 quarries in the United Kingdom employing some 35,000
people. The industry produces an estimated 290 million tonnes a year, and mineral extraction
and processing contribute approximately 8% of UK GDP. The products of the quarrying
industry such as limestone, sandstone, sand & gravel, slate and china clay are essential to
every-day living and critical to the maintenance of the economy and living standards, and this
is expected to grow by 20% over the next decade due to the impact of more construction and
road building projects.
However, quarrying is a dangerous industry. Towards the end of the 1990’s the industry had
injury rates which were significantly greater than a number of industries perceived as being
‘high hazard’ (such as construction). This led to the industry to sign up to the ‘Hard Target’
initiative to reduce accidents over a five year period from 2000-2005 (Foster & Pearce, 2003).
At the end a reduction of 52% was noticed. Following this success the next stage of the
initiative (2005-2010) will be to achieve a further 50% reduction in injuries by 2010 with the
ultimate aim of zero incidents by 2015. As well as being a numerical target, the ‘hard target’
consists of a number of initiatives designed to improve the competence of its workforce, in
particular their education and training with respect to health and safety. To ensure the
continuing success of the Hard Target it is important to continue to address the underlying
causation of injury at quarries. This has led to many calling for a re-focus on the human
element of accidents in this industry (Peters et al, 1997; Geller et al, 2001; Galvin, 2005).
Indeed, examination of the main causes of injuries at quarries and mines supports the widely
accepted fact that over 90 percent of workplace injuries are the result of workers' unsafe
behaviours. The most common injuries across quarry and mining sites are manual handling,
transport, falls from height, and slips & trips. All of which are attributable to unsafe acts of the
employee.
A well-documented approach that focuses on such unsafe acts in the workplace is that of
Behavioural-Based Safety (BBS).
2. 2
What is Behavioural-Based Safety?
BBS is the application of psychological research on behaviour applied to safety in order to
reduce accident and injury in the workplace. BBS has derived from behavioural learning
principles conceived by behaviourists during the late 19
th
century and developed into an
approach through integrating organisational development with quality and safety
management.
Elementary behavioural principles concern the events that affect the behaviour, including the
cues that precede (Pavlov, 1927) and the consequences that follow (Skinner, 1969) the
behaviour. Incentives, feedback and goal-setting all rise from this theory that behaviour is a
reaction to its cues and consequences. For its application to safety in the workplace
supplementary pertinent features constitute the typical current day BBS processes. Geller et
al (2001) proposed four essential processes to employ in a behavioural-based system for
mine safety: (1) Define target behaviours; (2) Observe critical behaviours; (3) Intervene for
instruction, support, motivation or safety self-management; and (4) Test the impact of the
process.
Success of BBS Across Industries
Success of BBS applications has been found across a great variety of industries. Evidence of
this is provided by critical appraisals of the BBS approach and examination of studies
evaluating BBS interventions that have involved a cross-section of industrial sectors.
McAfee and Winn (1989) reviewed 24 studies that investigated the effectiveness of
behavioural approaches that used incentives and/or feedback in commercial organisations.
They affirmed that all without exception showed improvement in safety performance through
reduction of injury figures and/or an enhancement of safety-related conditions. Similarly,
Guastello (1993) examined the effectiveness of 53 accident prevention programmes, noting,
“behavior modification techniques are potentially useful in many industries”.
Whilst extremely positive, these evaluative examinations were restricted by time and have
also been criticised for including too few studies. A more longitudinal study was carried out in
1999, which went beyond examining previous studies by investigating industrial approaches
directly. Krause et al (1999) conducted a thorough examination of 73 BBS applications in the
US over a five-year period, revealing highly significant success rates of the approach across
sites. Safety performance based on the measure of improvement of injury rate was found to
have an average increase of 26 percent after the first year of the approach being
implemented and an average of 69% increase by the fifth year. This research involved a good
cross-section of industrial sectors, including paper, petroleum, chemical, and food.
At first sight, this bodes well for extractive operations contemplating to take up this apparently
versatile approach. However, the occupational settings of quarrying or mining have not been
adequately represented in appraisals. This lack of representation is likely due to the limited
number of researchers that have tried and tested the BBS programme in quarry or mine sites.
BBS Applied Research in the Minerals Industry
Fox, Hopkins and Anger (1987) initiated a token-based reward system to improve safety
performance at two open-pit mines. Trading gift stamps were awarded to the full staff of mine
employees primarily in return for not having accidents or injuries. The awarding initiative
continued over 11 and 12 years. The considerable decline in lost time injuries (subsequent to
the introduction of the incentive measures) provides support for the use of behavioural
programmes in mining/quarrying operations and further demonstrates that the success of
these programmes need not be short-lived. Also in the setting of coal mines, Rhoton (1980)
succeeded in reducing miners’ safety violations with behavioural techniques including
observation, reinforcement and feedback.
More recently, in a quarry setting, Hickman and Geller (2003) applied a specialised BBS
strategy, the ‘Self-Safety Management’ approach (SSM), to improve quarry safety practices.
Fifteen workers from a US stone quarry were divided into two separate conditions that
involved different types of feedback on target safety behaviours. The SSM process involved
identification of safe and at-risk behaviours, SSM training, daily self-monitoring, self-
3. 3
administration of rewards, and individual feedback. Both conditions showed a positive
increase in operative safety behaviours, and the overall SSM approach showed statistically
significant improvement on the target safety behaviours.
Other researchers have examined and provided guidance on aspects of behavioural safety in
mining operations (Talbot et al, 1996; Schutte, 1998; Laurence, 2005; Pitzer, 2005;). For
example, research focusing on miners’ compliance to safety procedures and regulations
reveal such regulations alone will not reduce operatives’ safety violations (Laurence, 2005)
and that measurement of safety behaviour in mines is required in order to encourage
compliance with these procedures (Talbot et al, 1996).
The Unique Work-Environment of the Quarry
Owing to this limited research and occasional company efforts (Simpson et al, 1993; Irca,
2003), sites may find themselves in the position of having insufficient information to guide
them through an initiative. This drives the need to capitalize on literature pertaining to similar
work settings. An important characteristic of the quarry and mining setting is the small
workforce, many of whom work alone. Unfortunately, as well as a lack of evaluative research
of BBS with lone workers (Olson and Austin, 2001), there are misleading reports on a
fundamental component of BBS. Specifically, due to the majority of previous BBS research
concentrating on work environments that are conducive to work colleagues systematically
monitoring one another’s safety-related actions (Hickman and Geller, 2003), often reports
describe this use of peer-reporting as vital to the BBS system (Krause, 2002). Yet, as well as
being incompatible to the physical layout of a quarry, the culture of the close-knit quarry is
one where operatives are suspicious of providing information on their fellow workers’ bad
habits, perceiving it as “snitching” on their colleagues.
An alternative observation measure appropriate for this exceptional work environment is that
of self-observations. Support for the use of self-observations include the success of the SSM
approach that utilises safety self-monitoring, along with research that has found self-
monitoring to improve safety performance as part of a BBS measure (Olson and Austin, 2001)
and international behavioural safety experts that have endorsed self-reporting as a legitimate
BBS measure with lone workers (Krause, 1997; McSween, 2003).
OVERVIEW OF CURRENT STUDY
The present study is a Camborne School of Mines led initiative, funded by the Minerals
Industry Sustainable Technology Programme (MIST) and supported by the Health and Safety
Executive (HSE). The minerals company, WBB Minerals Ltd, have offered their quarries to
trial a behavioural safety process, which is based on both academic research and commercial
recommendations. The (BSQ) process has been put into practice at two quarry sites.
1. Objectives
To highlight unsafe behaviours common to the quarry sector, identify root causes of such
behaviours and to develop a behavioural-based safety process applicable to quarries.
2. Methodology
2.1 The Sample
2.1.1 Setting
WBB Minerals Ltd (WBB) is one of the world’s largest suppliers of industrial minerals,
producing a wide range of products from ceramics to construction material. The sample for
this study is from two of WBB’s quarrying sites based in the UK, each of which generate
different products from separate geographical regions. The first site contains ball clay, china
clay & kaolin quarrying and processing operations in the South West of England; the second
site comprises of two silica sand operations in the North West of England.
2.1.2 Participants
The participants are the 179 staff employed on these sites. This includes 125 employees at
site 1 and 54 at site 2. All 179 employees are considered to be involved in this study, unless
they decide not to participate by choosing not to engage in key elements of the process, all of
which are voluntary. Participation measurement was calculated throughout these elements.
4. 4
At each site, a project steering team guides the BBS process. The teams are made up of five
(site 1) and seven (site 2) front-line employees (operatives) from both quarrying and
processing operations. These operatives represent a cross-section of core workers and
contractors from each department. In one team, a manager is included in the steering team to
provide access to senior management and able to offer immediate decisions at a local level.
Team members were selected at random by human resources personnel and approached for
voluntary participation. Management approved these candidates as workers that would
contribute well.
2.2 Procedure
The steering team directs the operatives through the 6 phases of programme (see below),
which involve self and peer observations as the behavioural measure, and feedback, goal-
setting and rewards as the instigators for behaviour change.
1
Phases of the Behavioural Safety in Quarries (BSQ) Programme
Phase 1: Introduction of the Programme and Data Collection
Phase 2: Identification of Key Safety Behaviours (KSB)
Phase 3: Behavioural Observations (Self & Peer-Observation Checklists) & Training
Phase 4: Analysis of Root Causes
Phase 5: Making Changes, Reinforcement Schemes, Feedback & Goal Setting
Phase 6: Evaluation of Programme Effectiveness & Plan for Continual Development
Phase 1: Introduction to Programme & Data Collection
Initial data was collected through the use of focus groups, questionnaires
2
and interviews to
obtain information on the current safety culture, systems and controls and to find out whether
the company and the sites in question were ready for such an initiative. Injury and near miss
records were also analysed in detail and fed back to middle management and senior
boardroom executives.
Management, supervisors, operatives and contractors participated in three separate
workshops detailing the underlying principles behind BBS and an outline of the BSQ process.
Phase 2: Identification of KSB
Formation of the Steering Team: Next, a steering team was formed at each site. Their role
to shape and guide the process include the following primary duties: participating in safety
steering team meetings on a weekly basis; promoting workforce ownership of the process,
identifying and defining key safety behaviours; developing behavioural observation checklists;
planning the observation strategy, conducting and assisting with observations; retrieving
observation data and storing them in a safe place; providing feedback on progress and safety
results; facilitating safety goal-setting; and proposing action plans based on the root cause of
unsafe behaviours.
Certain researchers have argued against the use of the steering team, suggesting that the
team “divorces the [BBS] process from the workforce” (Cooper, 2000). This may hold true for
many organisations. However, due to a large number of lone employees and difficult shift
patterns, it is challenging to assemble workgroups to act as their own steering committees. It
is also impractical to hold regular meetings with the entire workforce and uneconomical to
have regular meetings in each separate work area. Additionally, the communication systems
within quarries are far removed from electronic correspondence akin to that used in office
settings. Therefore, for such workplaces, the most appropriate method of stream-lining
information back to the operatives is through a steering team that consists of members from
each quarry division, with occasional meetings involving all workers. Each team member
updates their departments’ workers on the weekly steering team meetings, ensuring full
involvement of workers at the front line. This also facilitates the operatives’ ownership of the
1
Currently, the process is at phase five, and has been rolling over a period of one year.
2
The safety culture questionnaire produced a response rate of 78% (68% at site 1; 87% at site 2).
5. 5
programme, as it is their colleagues rather than management or external consultants that are
requesting/distributing information and feedback throughout the process.
Identification of the Top 20 Key Safety Behaviours (KSB): The team carried out individual
interviews with workers on what they believed to be the most important and prevalent unsafe
actions onsite. One hundred and twenty-seven operators
3
gave their views and ratings on
what they perceived as either insignificant or central to site safety based on a list compiled
from initial data collection (injury, near miss records and interviews) and steering team
meeting discussions. This information was collated and the top 20 key safety behaviours
(KSB) finalised.
This involvement from the workforce served to facilitate operative ownership of the
programme and increase cooperation and acceptance of checklists incorporating the 20 KSB
selected.
Pareto’s law dictates that 80% of the consequences stem from 20% of the causes. Applied to
accidents, this principle prescribes that, at any given time, 20% of behaviours are responsible
for 80% of accidents. Therefore, logic dictates it is more productive to focus on a restricted
number of critical and current behaviours rather than overload the workforce with all safety
acts performed onsite. The present process involved a parameter of 20 behaviours. Working
on the assumption that these 20 behaviours are the current 20 out of 100 behaviours (20%)
that are actually responsible for 80% of the accidents, this figure was determined on the
premise that this will limit dilution of focus and still be an adequate number of acts to focus on
to achieve the desired results.
The KSB themselves had parameters attached to them: They had to be observable, specific
and perceived as a major safety issue at the site and/or liable to cause an accident. The
selected KSB were defined with precise specificity to reduce ambiguity of the safety act and
increase reliability of their measurement.
Phase 3: Behavioural Measure
The purpose of this phase was to obtain a current baseline measurement of the twenty KSB
and simultaneously gauge the operatives’ preference of self or peer-observations on these
twenty, as well as assessing the observational measures themselves through comparison of
the safety results from these two different methods of assessment. The one-tailed hypothesis
was that the majority of the workforce would favour the method of self-reporting. This was
based on consideration of the nature of quarries as having a physical layout unsupportive of
peer monitoring and on operative’s loyalty to co-workers influencing them to prefer reporting
their own prohibited actions rather than informing on the prohibited actions of others.
Training: All operatives were supplied with an observation training workshop, including
demonstrations of how to conduct observations using checklists. Detailed definitions and
workplace related examples of each KSB were provided.
No Blame Policy: Emphasis was placed on anonymity and confidentiality of the checklist
responses. A ‘No Blame Policy’ attached to the behavioural measure was issued and a
leadership commitment statement to the no blame policy and BBS initiative was signed by
senior management and middle management from the relevant sites. This policy guaranteed
that no one would be disciplined for anything written on the checklists.
The choice of Checklist: All operatives, including hauliers and other contractors, were
offered the choice to complete either a ‘self-report’ checklist or a ‘peer-observation’ checklist
(see Figure 1 & 2 for checklist preference and associated safety percentage). These
checklists cover the same twenty key safety items with different phrasing. The self-report
sheet allows operatives to record and comment on their own safety actions, whilst the peer-
observation sheet enables logging and comments on the safety actions of others onsite.
3
The KSB involvement form had a response rate of 82% (79% at site 1 and 88% at site 2).
6. 6
The design of the Checklist: The checklists were of simple design, requiring the operatives
to either tick ‘yes’, ‘no’ or ‘non-applicable’ for each safety item listed. Whilst marking
responses with ticks served to reduce demand for written responses, which most operatives
agreed that they would rather avoid, the operatives were still encouraged to write down their
reasons for their unsafe acts on the back of the sheet. Those completing the peer-observation
checklist on other workers’ actions were advised to ask for the reason the unsafe act had
occurred. For those with literacy difficulties, steering members and other workmates read and
wrote on the observer’s behalf.
The Collection of Checklists: at the end of the quarry workers’ shifts, steering team
members collected completed checklists. These checklists were either placed into election
type boxes scattered around the site, or handed back directly to the members, often via work
group team leaders.
Baseline Observation Period: To capture the baseline measure of KSB, operatives were
instructed to conduct observations on a daily basis for a period of one month.
4
Scoring & Feedback: To obtain a concise measure of the KSB from the checklist responses,
the Behavioural Safety Index formula (Komaki et al, 1978) was used. This divides the number
of safe observations by the total number of safe and at-risk observations, multiplied by 100
5
.
Checklist responses were entered into spreadsheets that automatically calculated the safety
percentage by applying the BSI formula to the data entered. A collective safety percentage
was established on a weekly basis over the four-week observation baseline period (See
Figure 3 for weekly BSI). These safety figures (combined to ensure anonymity of individual
operatives) were fed back to all operatives via weekly toolbox talks. The manager in the
steering team also provided feedback to the rest of the managers at their monthly manager
operations review meetings.
Steering Team Observation Baseline: In addition to the operatives’ baseline measurement,
the steering team carried out their own month of peer-observations. This acted as a
crosscheck on the operatives’ checklist safety scores and was designed to enable future
safety targets to be based on this objective base measure. (See Figure 4 for comparison of
steering team and operative safety percentages).
Inter-Observer Reliability (IOR) Checks: Further accuracy checks on the reliability of the
steering team’s observations were carried out by dividing the number of times observers
agreed by the total number of times observers agreed and disagreed, multiplied by 100. The
steering team’s IOR was at 100%.
Phase 4: Analysis of Root Causes
Analyses of the Key Safety Behaviours were used to arrive at the underlying reason for the
at-risk behaviours.
As part of ‘Functional Analysis’, the A-B-C technique was used on the comments from the
back of the checklists and from the information gathered in Phase 1. The A-B-C approach
involves drawing out the Antecedents (or cues) of the Behaviour and its Consequences.
4
Actual participation was calculated as each worker completing one checklist every other day. This was
determined by the number of workdays divided by the number of checklists per employee over 1 month.
5
The checklists used in the present programme involved only one count of each unsafe act per day (i.e.
frequency of an unsafe act was not recorded). This was to simplify the observation process and, due to
hazardous operations, operatives completed their checklist at the end of the shift, by which time it may be
difficult to recall the accurate number of times the unsafe act had occurred.
7. 7
No negative
consequence for action
Quick entrance/egress results in
production target rewards (Positive
reinforcement of unsafe behaviour)
Time/Effort Saving to Use
Shorter Incorrect route
Below is a study example of ABC analysis on the KSB of ‘use of incorrect traffic routes’.
Antecedents Behaviour Consequences
6
Operatives were also involved in the identification of the root causes, via each steering team
member asking a selected few why they carry out at-risk KSB.
Phase 5: Making Changes
Action Plans & Changes: Based on the core root causes exposed, strategic plans were
drawn up to act on the instigators of poor safety performance. Proposed strategies were
assessed in terms of estimated impact on safety and on expenditure. The action plans were
submitted to management via an operations meeting, along with evidence in the form of
summarised operative responses.
The interventions and proposed changes comprised of adjustments on safety controls (e.g.
training), amendments to certain antecedents (e.g. signs, safety-targets, relocation of safety
equipment), re-design (e.g. seat belts) and consequences (e.g. rewards for safety).
Reward Schemes & Goal-Setting
Safety Bonus: At site 1, the launch of a collective safety bonus was designed to combine
incentive and safety goals on the twenty KSB. This bonus replaced the previous company
safety bonus scheme that relied on reported accident targets alone. The new system consists
of an annual bonus to be paid out to operatives if they achieve a safety index percentage of
85%
7
on both operative observations and on observations conducted by the steering team.
Individual Safety Rewards: As rewards are most effective when they are more immediate
following the act, individual safety rewards were introduced to accompany the collective
safety bonus. This reward scheme dictates that if an operative is observed carrying out a safe
act on the list of twenty KSB, they will be awarded with a safety raffle voucher. The voucher’s
stub is entered into the weekly raffle draw. At the end of the week, five winning vouchers are
pulled out of the box and five prizes awarded.
Due to the spread of quarry workers around the large sites, distributors of these vouchers
include a wide range of operatives to ensure a fair coverage of all work areas and help to
involve more workers in the practice of rewarding their colleagues. Besides the steering team,
distributors include site safety reps, NVQ assessors, team leaders and supervisors.
Phase 6: Evaluation of Programme Effectiveness
Evaluation: Towards the end of the BSQ initiative, the final phase is to evaluate the
programme effectiveness in respect to safety performance and in terms of applicability of
measures. The difference between baseline and intervention will be analysed. This includes a
comparison of the accident rates, safety attitudes from the questionnaires, and a comparison
of the safety percentage levels on a second behavioural measure that will be taken over a
period of one month to determine the progress on the KSB.
6
Impact of consequences are further analysed according to their timing, certainty and significance.
7
The figure of 85% was decided upon after considering the baseline BSI.
Poor Signage
(i.e. too much wording & not in
ideal location)
Use of
Incorrect
Traffic Routes
Lack of Instruction at
Weighbridge
(i.e. at first port of call on entry)
Production
Targets Set
8. 8
72%
74%
76%
78%
80%
82%
84%
86%
88%
90%
1 2 3 4
Weeks
BehaviouralSafetyIndex
Site 1
Site 2
0
100
200
300
400
500
600
700
800
900
1000
Self-Reports Peer-Obs
Type of Checklist
No.ofChecklistsChosen
Site 1
Site 2
0
10
20
30
40
50
60
70
80
90
100
Site 1 Site 2
Sites
AverageBehavioural
SafetyIndex
Operatives
Baseline
Steering
Team
Baseline
68%
70%
72%
74%
76%
78%
80%
82%
84%
86%
88%
Self-Reports Peer-Obs
Type of Checklist
BehaviouralSafetyIndex
Final Feedback Session: At this final stage, it is crucial that the concluding results and
implications of the study be fed back to the workforce and a strategy established to maintain
improvements to safety for the future.
3. Results and Discussion
The following graphs are generated from the one-month daily observations baseline measure.
Figure 1: Type of Checklist Preferred Figure 2: BSI by Checklist
Figure 3: BSI of Combined Checklists Figure 4: BSI of Two Monthly
Baseline Measures
8
Figure 1 demonstrates that self-observations have been particularly well received and
favoured over peer-reports. This is true for site 1 significantly more than site 2, which may be
on account of culture differences at each site, with site 1 owning a more close-knit workforce.
From Figure 2 it can be seen that self-reports have assessed a higher number of safe acts
compared with peer-reports. This may be attributable to a lack of self-awareness of own at-
risk behaviours or indicate dishonesty in self-reports, corresponding to theories of self-serving
and social-desirability bias (the former is the tendency to present information that will result in
social approval from others; the latter refers to the inclination to accept responsibility for
successes but not failures). Nevertheless, Figure 2 does depict a good level of honesty in
recording unsafe acts, with an average of 18% at-risk acts reported (well-fitted to Pareto’s
Law).
Illustrated in Figure 3, the baseline measure of 20 KSB reveals a noticeable positive increase
in the safety level at both sites. Often seen as a confounding variable, the ‘Hawthorne Effect’
is a likely cause for this increase. This is the sheer presence of behavioural monitoring alone
inducing the desirable behaviour being measured. Again, this can be linked to social
8
Note that the steering team only produced 104 observations, whilst the workforce completed 1186.
9. 9
desirability bias to perform and is consistent with Alvero and Austin’s (2004) conclusion that a
process of self-monitoring improved participants’ safety performance.
Moreover, whilst the measure was intended as a baseline period, certain behavioural
techniques were involved; weekly feedback, visual and verbal, were used to achieve buy-in of
the programme. Benefits of the behavioural practices may further explain the improvement in
performance. For example, the operatives heighten their awareness to what they have agreed
on as the most common unsafe acts onsite, and by approaching others to ask for their
reasons for acting unsafely communication on safety is increased and instigates displays of
‘propensity to actively care’ (i.e. the pro-social tendency to help towards a safer workplace).
This said, it is important to note that one-month of measurement is not a considerably long
period of time to assess behaviour, and external factors may be responsible for the change.
Still, anecdotal evidence further accredits a rise in safety to the BSQ programme, with
managers reporting that operatives “already appear more involved in site safety” attributable
to a rise in discussions on KSB.
The final graph, Figure 4, reveals two very different results for each site. Site 1 shows a
considerable difference between the average safety percentages of the operatives baseline to
that of the steering teams, whilst site 2 have an approximately equal safety percentage. The
reasons for the contrasting results are not yet clear.
Another telling outcome from the project is that the list of top 20 KSB at each site had the
following 14 KSB in common: Use of three-point rule, speed, use of traffic routes, driving with
vehicle butt raised, cleaning spillages, priority to loaded/larger vehicles, seat belt use, removal
of trip hazards, PPE use, near miss reporting, running/rushing, load carried over distance, use
of tools, and use of safety harness. Further investigation on these 14 would ascertain
whether these are common across industry, which would provide a generic starting point for
BBS interventions.
3.1 Conclusion
The present study has encouraging implications for self-auditing safety behaviours,
demonstrated by worker buy-in of the self-report; the increase in BSI (led by a majority of self-
reports); and a substantial number of at-risk behaviours reported in the self-report checklists.
However, the results imply that operatives may not have been as accurate in their self-
reporting as they were in their recordings of others. Considering Hickman and Geller’s (2003)
assertion that “self-monitoring alone lacks the accuracy and credibility of a more objective
observational system”, a combination of peer and self-reporting is proposed to be more
appropriate for behavioural assessment in quarry settings. This incorporates a selection of
employees (who regularly move around site) to document safety actions of others, alongside
lone workers recording their own acts to guarantee a valid number of responses and to
ensure involvement of as many workers as possible.
To date, the trial of the BSQ process has applied BBS to two quarry sites and produced a
workable method with preliminary results that indicate feasibility of a BBS programme in the
minerals industry. Subsequent to the interventions period, the questionnaire and checklists
will be repeated, which should provide us with a clearer indication of the effectiveness of the
process. It is anticipated that this follow up will show a significant improvement in BSI,
reduction in accidents, and improved safety attitudes and culture.
REFERENCES
Alvero, A.M. and Austin, J. (2004) The Effects of Conducting Behavioral Observations on the Behavior
of the Observer, Journal of Applied Behavior Analysis, 37, 457-468.
Cooper, D. (2000) discussion forum at http://www.behavioural-
safety.com/cgi/show.pl?file=20000310185124.discuss.20000311112956.reply&from=Archive&fromurl=a
rchive. Date accessed:12.06.06.
Foster P.J. and Pearce, R. (2003) Hard Targets: Improving Safety in the UK Quarrying Industry,
Minesafe International 2003, Perth, Western Australia.
10. 10
Fox, D.K., Hopkins, B.L., & Anger, W.K. (1987). The Long-Term Effects of a Token Economy on Safety
Performance in Open-Pit Mining, Journal of Applied Behavior Analysis, 20, 215-224.
Galvin, J.M., (2005) Occupational Health and Safety Acts – Performance and Prosecution in the
Australian Minerals Industry Mining Technology: IMM Transactions section A, 114, 4, 251-256.
Geller, E.S., Carter, N., DePasquale, J., Pettinger, C., & Williams, J. (2001).Applications of Behavioral
Science to Improve Mine Safety, In M. Karmis (Ed.), Concepts and Processes in Mine Health and Safety
Management, Society for Mining, Metallurgy, and Exploration, Inc.
Guastello, S.J. (1993). Do We Really Know How Well Our Occupational Accident Prevention Programs
Work?, Safety Science, 16, 445-463.
Hickman, J.S. and Geller, S.E. (2003) A Safety Self-Management Intervention for Mining Operations,
Journal of Safety Research, 34, 299– 308.
Irca (2003) Training Manual for the Behaviour Intervention Technologies Behavioural Permance
Improvement (BPI) Process, Internal Document, South Africa, 1-27.
Komaki, J., Barwick, K.D., & Scott, L.R. (1978) A Behavioral Approach to Occupational Safety:
Pinpointing and Reinforcing in a Food Manufacturing Plant, Journal of Applied Psychology, 63, 4, 434-
445.
Krause, T.R. (1997) The Behavior-Based Safety Process: Managing Involvement for an Injury-Free
Culture, 2nd Edition. New York: Van Nostrand Reinhold.
Krause, T.R. (2002) Myths, Misconceptions, and Wrong-headed Ideas About Behavior-Based Safety
Why Conventional Wisdom is Usually Wrong, white paper by Behavioural Science and Technology Inc.
Krause, T.R., Seymour, K.J. & Sloat, K.C.M (1999) Long-Term Evaluation of a Behavior-Based Method
for Improving Safety Performance: A Meta-Analysis of 73 Interrupted Time-Series Replications. Safety
Science, 32, 1-18.
Laurence, D. (2005) Safety Rules and Regulations on Mine Sites – The Problem and a Solution, Journal
of Safety Research, 36, 1, 39-50.
McAfee, R.B., Winn, A.R., 1989. The Use of Incentives/Feedback to Enhance Work Place Safety: A
Critique of the Literature. Journal of Safety Research, 20, 7-19.
McSween, T.E. (2003) The Values-Based Safety Process: Improving Your Safety Culture with Behavior-
Based Safety. USA: John Wiley & Sons Inc.
Olson, R. and Austin, J. (2001) Behavior-Based Safety and Working Alone; The Effects of a Self-
Monitoring Package on the Safe Performance of Bus Operators, Journal of Organizational Behavior
Management, 21, 3, 5 -43.
Pavlov, I.P. (1927) Conditioned Reflexes: An Investigation of the Physiological Activity of the Cerebral
Cortex. Translated and edited by G. V. Anrep. London: Oxford University Press.
Peters, R.H., Bockosh, G.R., & Fotta, B. (1997). Overview of U.S. Research on Three Approaches to
Ensuring that Coal Miners Work Safely: Management, Workplace Design, and Training, paper
presented at the Japan Technical Cooperation Center for Coal Resources Development.
Pitzer, C.J. (2005) The New Management of Risk - Competency-Based Safety, Conference Proceedings
– Ninth Underground Operators' Conference 2005.
Rhoton, W. (1980). A Procedure to Improve Compliance with Coal Mine Safetv Regulations, Journal of
Organizational Behavior Management, 2, 4, 243-249.
Schutte, P. (1998) The Human Factor in Safety: A Behavior-Based Approach Enhancing Empowered,
Valued and Safety Committed Employees. Mine Safe International 1998, 219 –228.
Simpson et al, (1993) The Role of Human Error in Accident Aetiology and the Development of an
Operational Human Error Audit System. Nottinghamshire: Commission of European Communities.
Skinner, B.F. (1969) Contingencies of Reinforcement. New York: Appleton-Century-Crofts.
Talbot, C.F., Mason, S. von Glehn, F.H., Lomas, R.H. and Simpson, G.C. (1996). Improve the Safety Of
Workers by Investigating the Reasons Why Accepted Safety and Work Standards are not Complied
With on Mines. SIMRAC, International Mining Consultants Ltd. Project No. GEN 213.