Orthographic Projections of Straight Line
•Download as PPTX, PDF•
0 likes•57 views
Orthographic Projections of Straight lines with Step by step procedure and with solved examples. Please do subscribe the channel. https://bit.ly/2U4rwCc For any doubts please contact: drawingforengineers@gmail.com
Report
Share
Report
Share
Recommended
Engineering graphics 1 phase-i_2013_second
1. The problem involves drawing the projections of a line PQ where point P lies on the horizontal plane and point Q is 50 mm above the HP and 80 mm in front of the vertical plane. The line is inclined at an angle of 40 degrees to the vertical plane.
2. The elevation of the line measures 78 mm. The true length of the line and the inclination of the line to the horizontal plane must be found. The traces of the line must also be located.
3. The steps involve drawing the projections, locating the points P' and Q', drawing the inclined line using the given angle, measuring the true length and inclination angle, and determining the traces.
Engineering graphics 1 phase-iii_2013
The document provides instructions for drawing the projections of a 65 mm line AB inclined at 40° to the horizontal plane and 35° to the vertical plane. It involves drawing the projections of point A located 15 mm in front of the vertical plane. Then, the projections of the line are drawn based on its inclinations and the traces are located by extending the projections and drawing projectors.
Engineering graphics 1 Regular
1. The problem provides data about two points A and B of a line AB, including their front and top view angles and the position of B above the horizontal plane.
2. The solution involves drawing the projections of the points A and B, determining the true length (TL) of the line AB, and locating its traces by extending the projections.
3. Key steps include drawing the projections at the given angles, extending lines to find the true length and true inclinations, and drawing the horizontal and vertical traces.
Projection of lines step by step process
A line AB is given with end A at 15mm above the HP and 20mm in front of the VP, and end B at 50mm above the HP and 75mm in front of the VP. The distance between the end projectors is 50mm. The projections and true shape of the line are to be drawn, and its true length and true inclinations with the principal planes are to be found.
Projection of planar surfacE
Projection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacE
Line inclined to both HP and VP
https://youtu.be/_qVROgZ9CVs
A line AB is 75 mm long A is 50 mm in front of VP and 15 mm above in front of VP and is above HP Top View of AB is 50 mm long Draw and measure the Front View. Find the true inclinations.
orthographic projections of lines- I
line parallel to one plane and perpendicular to other plane, line parallel to both planes , line inclined to one plane and parallel to other plane, solutions in AUTO CAD
Lesson 2-lines-ii
This document discusses methods for projecting straight lines that are inclined to both the horizontal and vertical planes. It describes the rotating line method, which involves 4 steps: 1) drawing the front view with the line parallel to the vertical plane, 2) drawing the top view with the line parallel to the horizontal plane, 3) drawing the locus of the other end of the line, and 4) rotating the views to the required position along the locus. The rotating trapezoidal plane method uses trapezoidal planes containing the line and its projections to determine the true length and inclinations. Special cases and tips for solving problems are also provided.
Recommended
Engineering graphics 1 phase-i_2013_second
1. The problem involves drawing the projections of a line PQ where point P lies on the horizontal plane and point Q is 50 mm above the HP and 80 mm in front of the vertical plane. The line is inclined at an angle of 40 degrees to the vertical plane.
2. The elevation of the line measures 78 mm. The true length of the line and the inclination of the line to the horizontal plane must be found. The traces of the line must also be located.
3. The steps involve drawing the projections, locating the points P' and Q', drawing the inclined line using the given angle, measuring the true length and inclination angle, and determining the traces.
Engineering graphics 1 phase-iii_2013
The document provides instructions for drawing the projections of a 65 mm line AB inclined at 40° to the horizontal plane and 35° to the vertical plane. It involves drawing the projections of point A located 15 mm in front of the vertical plane. Then, the projections of the line are drawn based on its inclinations and the traces are located by extending the projections and drawing projectors.
Engineering graphics 1 Regular
1. The problem provides data about two points A and B of a line AB, including their front and top view angles and the position of B above the horizontal plane.
2. The solution involves drawing the projections of the points A and B, determining the true length (TL) of the line AB, and locating its traces by extending the projections.
3. Key steps include drawing the projections at the given angles, extending lines to find the true length and true inclinations, and drawing the horizontal and vertical traces.
Projection of lines step by step process
A line AB is given with end A at 15mm above the HP and 20mm in front of the VP, and end B at 50mm above the HP and 75mm in front of the VP. The distance between the end projectors is 50mm. The projections and true shape of the line are to be drawn, and its true length and true inclinations with the principal planes are to be found.
Projection of planar surfacE
Projection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacEProjection of planar surfacE
Line inclined to both HP and VP
https://youtu.be/_qVROgZ9CVs
A line AB is 75 mm long A is 50 mm in front of VP and 15 mm above in front of VP and is above HP Top View of AB is 50 mm long Draw and measure the Front View. Find the true inclinations.
orthographic projections of lines- I
line parallel to one plane and perpendicular to other plane, line parallel to both planes , line inclined to one plane and parallel to other plane, solutions in AUTO CAD
Lesson 2-lines-ii
This document discusses methods for projecting straight lines that are inclined to both the horizontal and vertical planes. It describes the rotating line method, which involves 4 steps: 1) drawing the front view with the line parallel to the vertical plane, 2) drawing the top view with the line parallel to the horizontal plane, 3) drawing the locus of the other end of the line, and 4) rotating the views to the required position along the locus. The rotating trapezoidal plane method uses trapezoidal planes containing the line and its projections to determine the true length and inclinations. Special cases and tips for solving problems are also provided.
Criterios
The document contains three geometry word problems involving triangles. Each problem provides measurements for sides or angles of triangles and asks to calculate unknown values. The problems involve using properties of similar triangles or trigonometric ratios to deduce missing lengths or angles.
Lesson 2 Projections of Straight Lines - Part II
Projections of a Straight line kept inclined to both HP and VP. Rotating line method and Rotating Trapezoidal Method
Projection of Pentagonal Pyramid solid
The document provides instructions for drawing the projections of a pentagonal pyramid with a base size of 30mm and axis length of 60mm. The pyramid rests on its base side on the horizontal plane (HP) with one triangular face perpendicular to both the vertical plane (VP) and HP and its axis parallel to VP. The top and front views of the pyramid are drawn showing the necessary points marked and joined to illustrate the projections.
New lesson 1 points and lines - i
This document provides an overview of projections of points and lines in engineering drawings. It discusses the principles of projection and defines projection planes. It then demonstrates how to project and draw the top and front views of points and lines in different positions and orientations relative to the projection planes. Examples are given of drawing the projections of points and lines, including marking the traces. Tips are provided for solving problems involving projecting inclined lines. The document recommends reference books on engineering graphics and drawing.
Ellipse by general method
The document provides instructions for drawing the projections of a regular hexagon where one corner is located in the horizontal plane (HP) and the surface of the hexagon is inclined at 45 degrees to the HP. It specifies that the hexagon has a side length of 40mm and the top view of the diagonal through the corner in the HP makes an angle of 60 degrees with the vertical plane (VP). It also provides the necessary visualizations of the orientations and angles.
Lesson 5-solids-ii
This document discusses methods for projecting solids when the axis is inclined to the horizontal plane (HP) and parallel to the vertical plane (VP). It describes the change of position method, which involves first drawing the projections with the axis perpendicular to HP, then tilting the front view to the correct orientation. Several examples demonstrate applying this method to a pentagonal prism, square pyramid, cylinder, and cone. Tips are provided for determining which edges are visible or hidden in the projections. The document is intended to teach engineering graphics concepts related to multi-view projections of 3D objects.
8 8b Trig Intro2
This document provides examples of using trigonometric ratios (sine, cosine, tangent) to solve for unknown sides of right triangles when given angle and side measurements. Several examples are worked through, identifying opposite, adjacent, and hypotenuse sides based on a given angle and using trig functions (sine, cosine, tangent) to calculate values or unknown sides. The document demonstrates setting up and solving trigonometric ratios to find missing values in right triangles.
ATS Destinaire 3/4Bhk Apartments Noida Extension || Call@8744000006
ATS Destinaire is a newly launched residential project located at Sector 1 in Greater Noida. It is created by ATS Greens. The undertaking comprises of extensive and vaporous 3 and 4 BHK condos. The task likewise has an all-around established out framework which gives it extra quality and solidness.
Final case study powerpoint
Case study to build a predictive model for the Equestrian racing data and help the client to increase profits.
Lesson 6-solids-iii
This document discusses the projection of solids with axes inclined to the vertical plane (VP) and parallel to the horizontal plane (HP). It describes the change of position method for drawing such projections in two steps: 1) assume the axis is perpendicular to VP and parallel to HP and draw front and top views; 2) reproduce the top view at the required inclination and project the front view. It provides examples of applying this method to draw the projections of various solids, including prisms, cylinders, pyramids, and cones, oriented with different inclinations. Tips are also given for determining which edges are visible or hidden in the projections.
Ellipsebygenmethod(thedirectdata[1].com)
The document contains instructions to draw the projections of a regular hexagon where one corner is located in the horizontal plane (HP) and the surface of the hexagon is inclined at 45 degrees to the HP. The top view shows the diagonal through the corner in the HP makes an angle of 60 degrees to the vertical plane (VP).
Projection of Plane Step by step Process
The document provides instructions to draw the projections of a regular hexagon with sides of 25mm that is oriented in the given position in space. The hexagon has one side in the horizontal plane and inclined at 60 degrees to the vertical plane, with its surface making an angle of 45 degrees to the horizontal plane. The steps include drawing the hexagon, front view, top view rotated to show the inclined side, and using projectors to obtain the inclined side view.
Lesson 3-planes
The document discusses the projections of planes and their traces. It defines a plane as a two-dimensional object with length and breadth. It explains how to determine the front, top, and side views of a plane based on its orientation relative to the horizontal and vertical planes. It provides examples of determining the projections of different shaped planes in different orientations, such as a square plane perpendicular to the horizontal plane, a triangular plane inclined to the vertical plane, and a hexagonal plane perpendicular to both planes. It concludes by providing tips for solving problems on plane projections and listing reference books.
Lesson 4-solids-i
This document discusses projections of solids in engineering drawing. It defines different types of solids like cubes, prisms, and pyramids. It explains the six positions a solid can be placed in for projections and how to visualize the projections. Examples are provided on drawing top, front, and side views of rectangular prisms, hexagonal prisms, and triangular prisms based on their position. Tips are given on drawing visible and hidden edges in different views. The document aims to help understand projections of solids.
Engineering-Drawing-Part-4[1].ppt
The document discusses traces of lines and problems involving traces of lines. It begins by defining horizontal trace (HT) and vertical trace (VT) as the points where a line or its extension intersects the horizontal and vertical planes. It then provides steps to locate HT and VT when given projections of a line. Several example problems are worked through, showing how to draw projections of a line and determine its inclinations when given information about its traces or endpoints. The document also discusses cases where a line lies in an auxiliary view plane or profile plane.
2.1 PROJECTION OF LINES.ppt
- A line AB is given with end points A and B located at specific distances above and in front of the principal planes
- The problem asks to draw the projections of the line AB and find its true inclination with the horizontal and vertical planes
- Key details provided include the true length of the line, locations of the end points relative to the principal planes, and sometimes the front or top view measurements
- The response will involve sketching the front and top views of the line and calculating the angles of inclination θ (with HP) and Φ (with VP)
Engineering drawing-part-4
1. The document discusses the concept of traces of a line, which are the points where a line or its extension intersect reference planes like the horizontal plane (H.T.) and vertical plane (V.T.).
2. It provides steps to locate the horizontal trace (H.T.) and vertical trace (V.T.) when given the projections of a line.
3. Several example problems are included that demonstrate how to draw the projections of a line and locate its traces, given information about the line's inclination, length, or position relative to the reference planes.
Projection of lines(new)
A line AB is given with information about the positions of ends A and B relative to the principal planes and their distances. The task is to draw the projections of the line and determine its true length and true inclinations to the two principal planes. Additional information may be given such as true length, inclinations, traces etc. Relevant projections are to be drawn and missing information like inclinations are to be calculated.
PROJECTION OF LINES(new).ppt
A line AB is given with various properties:
1. Its end A is located at a certain position above and in front of the principal planes.
2. Its end B is located at another position above and in front of the principal planes.
3. Additional information like true length, true inclinations, front view length may be given.
The task is to draw the projections of the line AB and determine its true inclinations with the principal planes if not already given.
Projection of straight lines I.pdf
1) The document discusses orthographic projections of points, lines, and planes. It provides notation for different views, such as front view (FV) and top view (TV).
2) Key concepts covered include locating an object relative to horizontal and vertical planes using quadrants, and drawing the FV and TV based on the object's location. Examples are given for points located in different quadrants.
3) Projections of straight lines are also discussed, including lines parallel or inclined to the planes. True length, reduced length, and inclinations of views are important parameters.
4) Several example problems are provided to demonstrate how to draw orthographic projections of points and lines in different configurations. Steps are
Unit 1 Projection of straight lines I.pdf
1) The document discusses orthographic projections of points, lines, and planes. It provides notation for different views, such as front view (FV) and top view (TV).
2) Key concepts covered include locating an object relative to horizontal and vertical planes using quadrants, and drawing the FV and TV based on the object's location. Examples are given for points located in different quadrants.
3) Projections of straight lines are also discussed, including lines parallel or inclined to the planes. True length, reduced length, and inclinations of views are important parameters.
4) Several example problems are provided to demonstrate how to draw orthographic projections of points and lines in different configurations. Steps are
Engineering garphics projection of lines(new)
- Pranav Kulshrestha provides his contact information including social media handles and Skype/Wechat IDs.
- The document discusses several problems involving drawing projections of lines with given information about their true lengths, inclinations to planes, and positions of endpoints. It provides examples of determining missing information like true inclinations when some parameters are given.
More Related Content
What's hot
Criterios
The document contains three geometry word problems involving triangles. Each problem provides measurements for sides or angles of triangles and asks to calculate unknown values. The problems involve using properties of similar triangles or trigonometric ratios to deduce missing lengths or angles.
Lesson 2 Projections of Straight Lines - Part II
Projections of a Straight line kept inclined to both HP and VP. Rotating line method and Rotating Trapezoidal Method
Projection of Pentagonal Pyramid solid
The document provides instructions for drawing the projections of a pentagonal pyramid with a base size of 30mm and axis length of 60mm. The pyramid rests on its base side on the horizontal plane (HP) with one triangular face perpendicular to both the vertical plane (VP) and HP and its axis parallel to VP. The top and front views of the pyramid are drawn showing the necessary points marked and joined to illustrate the projections.
New lesson 1 points and lines - i
This document provides an overview of projections of points and lines in engineering drawings. It discusses the principles of projection and defines projection planes. It then demonstrates how to project and draw the top and front views of points and lines in different positions and orientations relative to the projection planes. Examples are given of drawing the projections of points and lines, including marking the traces. Tips are provided for solving problems involving projecting inclined lines. The document recommends reference books on engineering graphics and drawing.
Ellipse by general method
The document provides instructions for drawing the projections of a regular hexagon where one corner is located in the horizontal plane (HP) and the surface of the hexagon is inclined at 45 degrees to the HP. It specifies that the hexagon has a side length of 40mm and the top view of the diagonal through the corner in the HP makes an angle of 60 degrees with the vertical plane (VP). It also provides the necessary visualizations of the orientations and angles.
Lesson 5-solids-ii
This document discusses methods for projecting solids when the axis is inclined to the horizontal plane (HP) and parallel to the vertical plane (VP). It describes the change of position method, which involves first drawing the projections with the axis perpendicular to HP, then tilting the front view to the correct orientation. Several examples demonstrate applying this method to a pentagonal prism, square pyramid, cylinder, and cone. Tips are provided for determining which edges are visible or hidden in the projections. The document is intended to teach engineering graphics concepts related to multi-view projections of 3D objects.
8 8b Trig Intro2
This document provides examples of using trigonometric ratios (sine, cosine, tangent) to solve for unknown sides of right triangles when given angle and side measurements. Several examples are worked through, identifying opposite, adjacent, and hypotenuse sides based on a given angle and using trig functions (sine, cosine, tangent) to calculate values or unknown sides. The document demonstrates setting up and solving trigonometric ratios to find missing values in right triangles.
ATS Destinaire 3/4Bhk Apartments Noida Extension || Call@8744000006
ATS Destinaire is a newly launched residential project located at Sector 1 in Greater Noida. It is created by ATS Greens. The undertaking comprises of extensive and vaporous 3 and 4 BHK condos. The task likewise has an all-around established out framework which gives it extra quality and solidness.
Final case study powerpoint
Case study to build a predictive model for the Equestrian racing data and help the client to increase profits.
Lesson 6-solids-iii
This document discusses the projection of solids with axes inclined to the vertical plane (VP) and parallel to the horizontal plane (HP). It describes the change of position method for drawing such projections in two steps: 1) assume the axis is perpendicular to VP and parallel to HP and draw front and top views; 2) reproduce the top view at the required inclination and project the front view. It provides examples of applying this method to draw the projections of various solids, including prisms, cylinders, pyramids, and cones, oriented with different inclinations. Tips are also given for determining which edges are visible or hidden in the projections.
Ellipsebygenmethod(thedirectdata[1].com)
The document contains instructions to draw the projections of a regular hexagon where one corner is located in the horizontal plane (HP) and the surface of the hexagon is inclined at 45 degrees to the HP. The top view shows the diagonal through the corner in the HP makes an angle of 60 degrees to the vertical plane (VP).
Projection of Plane Step by step Process
The document provides instructions to draw the projections of a regular hexagon with sides of 25mm that is oriented in the given position in space. The hexagon has one side in the horizontal plane and inclined at 60 degrees to the vertical plane, with its surface making an angle of 45 degrees to the horizontal plane. The steps include drawing the hexagon, front view, top view rotated to show the inclined side, and using projectors to obtain the inclined side view.
Lesson 3-planes
The document discusses the projections of planes and their traces. It defines a plane as a two-dimensional object with length and breadth. It explains how to determine the front, top, and side views of a plane based on its orientation relative to the horizontal and vertical planes. It provides examples of determining the projections of different shaped planes in different orientations, such as a square plane perpendicular to the horizontal plane, a triangular plane inclined to the vertical plane, and a hexagonal plane perpendicular to both planes. It concludes by providing tips for solving problems on plane projections and listing reference books.
Lesson 4-solids-i
This document discusses projections of solids in engineering drawing. It defines different types of solids like cubes, prisms, and pyramids. It explains the six positions a solid can be placed in for projections and how to visualize the projections. Examples are provided on drawing top, front, and side views of rectangular prisms, hexagonal prisms, and triangular prisms based on their position. Tips are given on drawing visible and hidden edges in different views. The document aims to help understand projections of solids.
What's hot (14)
ATS Destinaire 3/4Bhk Apartments Noida Extension || Call@8744000006
ATS Destinaire 3/4Bhk Apartments Noida Extension || Call@8744000006
Similar to Orthographic Projections of Straight Line
Engineering-Drawing-Part-4[1].ppt
The document discusses traces of lines and problems involving traces of lines. It begins by defining horizontal trace (HT) and vertical trace (VT) as the points where a line or its extension intersects the horizontal and vertical planes. It then provides steps to locate HT and VT when given projections of a line. Several example problems are worked through, showing how to draw projections of a line and determine its inclinations when given information about its traces or endpoints. The document also discusses cases where a line lies in an auxiliary view plane or profile plane.
2.1 PROJECTION OF LINES.ppt
- A line AB is given with end points A and B located at specific distances above and in front of the principal planes
- The problem asks to draw the projections of the line AB and find its true inclination with the horizontal and vertical planes
- Key details provided include the true length of the line, locations of the end points relative to the principal planes, and sometimes the front or top view measurements
- The response will involve sketching the front and top views of the line and calculating the angles of inclination θ (with HP) and Φ (with VP)
Engineering drawing-part-4
1. The document discusses the concept of traces of a line, which are the points where a line or its extension intersect reference planes like the horizontal plane (H.T.) and vertical plane (V.T.).
2. It provides steps to locate the horizontal trace (H.T.) and vertical trace (V.T.) when given the projections of a line.
3. Several example problems are included that demonstrate how to draw the projections of a line and locate its traces, given information about the line's inclination, length, or position relative to the reference planes.
Projection of lines(new)
A line AB is given with information about the positions of ends A and B relative to the principal planes and their distances. The task is to draw the projections of the line and determine its true length and true inclinations to the two principal planes. Additional information may be given such as true length, inclinations, traces etc. Relevant projections are to be drawn and missing information like inclinations are to be calculated.
PROJECTION OF LINES(new).ppt
A line AB is given with various properties:
1. Its end A is located at a certain position above and in front of the principal planes.
2. Its end B is located at another position above and in front of the principal planes.
3. Additional information like true length, true inclinations, front view length may be given.
The task is to draw the projections of the line AB and determine its true inclinations with the principal planes if not already given.
Projection of straight lines I.pdf
1) The document discusses orthographic projections of points, lines, and planes. It provides notation for different views, such as front view (FV) and top view (TV).
2) Key concepts covered include locating an object relative to horizontal and vertical planes using quadrants, and drawing the FV and TV based on the object's location. Examples are given for points located in different quadrants.
3) Projections of straight lines are also discussed, including lines parallel or inclined to the planes. True length, reduced length, and inclinations of views are important parameters.
4) Several example problems are provided to demonstrate how to draw orthographic projections of points and lines in different configurations. Steps are
Unit 1 Projection of straight lines I.pdf
1) The document discusses orthographic projections of points, lines, and planes. It provides notation for different views, such as front view (FV) and top view (TV).
2) Key concepts covered include locating an object relative to horizontal and vertical planes using quadrants, and drawing the FV and TV based on the object's location. Examples are given for points located in different quadrants.
3) Projections of straight lines are also discussed, including lines parallel or inclined to the planes. True length, reduced length, and inclinations of views are important parameters.
4) Several example problems are provided to demonstrate how to draw orthographic projections of points and lines in different configurations. Steps are
Engineering garphics projection of lines(new)
- Pranav Kulshrestha provides his contact information including social media handles and Skype/Wechat IDs.
- The document discusses several problems involving drawing projections of lines with given information about their true lengths, inclinations to planes, and positions of endpoints. It provides examples of determining missing information like true inclinations when some parameters are given.
Projection of lines(new)(thedirectdata.com)
The line AB is inclined at 40 degrees to the VP. End A is 20mm above the HP and 50mm from the VP. The front view measures 65mm and the vertical trace is 10mm above the HP. To determine:
1) The true length of AB is 65/cos40° = 75mm
2) The inclination to the HP (θ) is 30 degrees
3) The horizontal trace is 10mm above the VP
Projection of lines
The document discusses the orthographic projections of straight lines. It defines five basic cases of lines: vertical, parallel to both planes, inclined to one plane and parallel to the other, inclined to both planes. It provides pictorial representations of each case and notes about front and top views. The document then presents several example problems demonstrating how to draw the projections of a line given information like its true length, angles of inclination, and positions of its ends. Diagrams illustrate the key steps and parameters involved in the problems.
Engineering Graphics-Lines
This document discusses the principles of engineering graphics related to projecting straight lines in orthographic projections. It begins by defining the different types of lines such as vertical, horizontal, and inclined lines. It then provides examples of how to determine the front view, top view, and true length of a line given information about its inclination to the planes and the positions of its ends. The document emphasizes that the front and top views of a line inclined to both planes will have reduced lengths. It concludes by discussing the special case of a line lying in a profile plane, where the front and top views will overlap on the same projector line.
Projection of lines(new)(thedirectdata.com)
A 100mm line PQ is inclined at 30 degrees to the HP and 45 degrees to the VP. Its midpoint M is 20mm above the HP and in the VP. P is in the third quadrant and Q is in the first quadrant. The projections show PQ inclined at 30 degrees to the HP in front view and 45 degrees to the VP in top view, with midpoint M at 20mm above the HP in both views and the ends P and Q in their respective quadrants as given.
Projections of lines modified.ppt
This document provides information and examples regarding the orthographic projections of points and lines. It begins by defining key terminology and notation used in orthographic projections. It then discusses the projections of a single point located in different quadrants and orientations relative to the horizontal and vertical planes. Next, it examines simple cases of projecting straight lines in different orientations. Examples are provided to demonstrate how to determine the front, top, and side views of a line given information about its length, orientation, and the position of its ends. The document concludes by discussing traces of lines where they intersect the horizontal and vertical planes.
Projections of Line mechanical engineering and .ppt
The document discusses the projection of straight lines in engineering graphics. It describes 7 simple cases of lines: 1) vertical and parallel to HP and VP, 2) vertical and parallel to VP and HP, 3) parallel to both HP and VP, 4) inclined to HP and parallel to VP, 5) inclined to VP and parallel to HP, 6) in the VP, and 7) in the HP. For each case, it provides example problems to draw the front and top view projections of a given line, including locating the trace. The document emphasizes determining the length, position relative to planes, and inclinations of a line to draw its projections.
Engineering Graphics Laboratory manual
Engineering graphics lab manual
Engineering graphics Question bank
Engineering drawing Question bank
Engineering Drawing lab manual
Engineering drawing Laboratory manual
Qb
This document provides examples of engineering graphics problems involving the projection of points, lines, and plane surfaces. There are over 30 examples given that involve constructing curves like ellipses, parabolas, and hypocycloids. They also include problems projecting points, lines, and plane objects like hexagonal plates in different orientations. The document is from the Department of Mechanical Engineering at VELTECH and was prepared by three assistant professors for a regulation on Engineering Graphics from 2013.
paper_1.pdf
1. The document provides instructions for drawing projections of various lines in first angle projection. It includes the dimensions and orientations of the ends of each line relative to the horizontal and vertical planes.
2. For each problem, the reader is asked to draw the front, top, and side views of the given line and determine any additional values specified such as true lengths or inclinations to the planes.
3. The document contains multiple repetitions of the instruction to draw the projections, views, and solve for related values for different described line scenarios.
Eg2 n
1. Orthographic projection is a method of projection where the projectors are perpendicular to the projection plane. This produces projections that maintain accurate dimensions and angular relationships.
2. Projections of objects are not drawn in the second and fourth quadrants to avoid confusion and overlapping of views.
3. Auxiliary planes are any planes other than the horizontal and vertical planes. They are classified as auxiliary vertical planes and auxiliary inclined planes.
Engineering graphics lines
This document discusses the principles and methods for projecting straight lines in orthographic projections. It describes 5 simple cases of lines in relation to the horizontal and vertical planes. Key points include:
- Lines can be parallel, perpendicular or inclined to the planes
- True length shows true inclination, apparent length shows apparent inclination
- Procedures are provided for obtaining true lengths and inclinations from apparent projections and vice versa
- Additional cases addressed include lines in profile planes and applications to practical situations
Projection of Points and Lines
This document provides instruction on orthographic projections and line projections. It begins by explaining the notation used to label different views of projections. It then covers concepts like quadrants, point projections in different locations, and line projections in different orientations. Examples are given of projecting points and lines in different positions in space. Key parameters for line projections are defined, including true length, angles of inclination, lengths of front and top views, and more. Step-by-step solutions are provided for sample problems of projecting lines with given information.
Similar to Orthographic Projections of Straight Line (20)
Projections of Line mechanical engineering and .ppt
Projections of Line mechanical engineering and .ppt
Recently uploaded
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Orthographic Projections of Straight Line
- 1. A line AB is 80 mm long and the end A is 15 mm above HP. The other end B is 10 mm in front of VP. The line is inclined at 30° with HP. and 45° with VP. Draw the projections of the line when it is in 1st quadrant. Question
- 2. X Y VP HP Locus of b Locus of a Locus of a’ Locus of b’ 15 10 b’ a’ b1’ b1 a b b2 300 450 α β α = 450 β = 550 Line Inclined to Both HP & VP
- 3. A line AB, 90 mm long, is inclined at 300 to the HP. Its end A is 12 mm above the HP and 20 mm In front of the VP. Its Front View measures 65 mm. draw the TV of AB and determine its inclination with the VP. Question
- 4. X Y VP HP 12 20 Locus of b’ Locus of a’ Locus of a Locus of b a' b' b1' a b b2 b1 Line Inclined to Both HP & VP 300 ɸ
- 5. The FV of line AB measures 60 mm and make angle of 450 with XY line. The TV is inclined At 300 to XY line. Draw the projections of line when end is 20 mm above HP and 45 mm in front of VP, And end B is 20 mm in front of VP. Find its True Length and True Inclinations.
- 6. X Y VP HP Locus of b’ Locus of a’ Locus of a Locus of b 20 45 20 a' b' b1' a b b2 b1 b2‘ Line Inclined to Both HP & VP 450 300 Ɵ = 410 Ɵ ɸ = 260 ɸ
- 7. A line AB of 90 mm long has its end A 35 mm above HP and 45 mm in front of VP. The line is inclined at 300 to HP and 450 to VP. Draw its projections
- 8. X Y VP HP a' a b b' b1' b1 b2 b2‘ 300 450 Locus of a Locus of b Locus of a’ Locus of b’ 35 45 Line Inclined to Both HP & VP