Organizational Skills And Technical Competences as LEAD PIPING MATERIAL ENG.
•Download as DOCX, PDF•
0 likes•225 views
The document outlines the key responsibilities of a Lead Piping Material Engineer which include developing piping material specifications, performing engineering calculations, assisting in procurement packages, reviewing bids, developing material take-offs from piping designs and requisitioning materials while approving vendor documentation.
Report
Share
Report
Share
Recommended
Organizational Skills And Technical Competences as LEAD PIPING ENGINEER (...
1. Acts as the lead piping engineer supervising a team to carry out piping design for projects ensuring compliance with specifications, budgets, and schedules.
2. Develops project scopes of work, defines piping execution methods and deliverables, and prepares labor hour and scheduling estimates.
3. Promptly recognizes and notifies others of any scope or cost changes, and provides accurate status reports to various project stakeholders including clients, vendors, and other engineering groups.
RIBA plan of work
The Royal Institute of British Architecture charter from 1834 establishes an 11-stage process for construction project management. This document discusses applying the RIBA Plan of Work to the construction of the Amawathura Asapuwa, a 5-story Buddhist temple in Malabe, Sri Lanka. An initial feasibility study was conducted which led to the design of the building. However, increasing the building capacity mid-construction resulted in issues following the RIBA Plan of Work. Proper planning throughout a project is recommended to achieve quality results.
Professional practices (lec 04) by k.iqbal
The estimator must maintain a high degree of organization throughout the estimate development process. A well-organized estimate improves the chances of winning work and completing it on budget. The estimator should keep detailed notes in an estimating notebook for each project, including workup sheets, summary sheets, and notes on calls with architects. When deciding which projects to bid, the estimator considers factors like the type of construction, location, and size to determine if it is a good fit. The estimating process involves carefully reviewing drawings and specifications, visiting the site, obtaining subcontractor bids, and tracking materials costs and quantities on workup sheets before summarizing totals on a bid sheet.
Front End Design Benefits
The document discusses front end design (FED) services provided by Process Engineering Simplified. FED aims to reduce risks, leverage industry expertise, and expedite project schedules. It involves developing process flow diagrams, plant layouts, schedules, equipment specifications, control narratives, cost estimates, site visits, elevation drawings, reviews, balances, and dust hazard analyses to identify risks and develop accurate budgets. Satisfied customers found FED crucial for organized, on-time, on-budget project delivery. Interested customers are encouraged to contact Process Engineering Simplified for assistance from process design to production.
Maaden Exp.
The document outlines the job responsibilities in the engineering department at Maaden Aluminium Refinery. Key responsibilities include identifying projects, preparing business cases and front-end engineering design reports to get feasibility approval, obtaining fund approval by preparing project definition reports, managing the detailed engineering, procurement, and project execution phases, and providing regular reporting to management. Current capital expenditure projects being handled are also listed.
20140311 final report
This document provides guidance and instructions for submitting final reports for projects funded by the Alpine Space Programme 2007-2013. It outlines the documents and sections required for the final report, including a publishable summary of key achievements and lessons learned (Section A), a technical report on project impacts and cooperation (Section B), and a declaration from the lead partner (Section C). Instructions are provided for the last progress report, highlighting the transnational impact and updating the budget. Projects must maintain their website and outputs for at least two years after closure and comply with subsidy contract terms regarding record keeping, dissemination of results, and avoiding substantial project modifications.
Project closing and methods
The document discusses the steps involved in closing a project. It begins by stating that a project has a definite beginning and end, and that the project closing phase involves evaluating if the project's objectives were met. It then lists potential reasons for early project termination such as changing needs or loss of resources. The main steps in project closing are: 1) confirming all work was completed as required, 2) completing any remaining payments, 3) obtaining formal customer acceptance, 4) final performance reporting, 5) handing off the completed project, and 6) releasing all project resources for new work. The document also outlines four methods for closing projects: by extinction, integration, addition, or starvation.
Epc presentation robert foxpresentation
This document discusses engineering, procurement, and construction (EPC) projects and opportunities for improvement through automation. It provides an overview of EPC project challenges, contrasts EPC and architecture, engineering, and construction projects, reviews principal EPC functions and engineering disciplines. It also discusses the evolution of CAD use, levels of modeling including 2D, 3D, 4D, and 5D, and provides a case study of a $2.5 billion EPC copper concentrator plant project in Chile. The document proposes using a work execution package matrix to coordinate material management across spatial divisions and commodity types.
Recommended
Organizational Skills And Technical Competences as LEAD PIPING ENGINEER (...
1. Acts as the lead piping engineer supervising a team to carry out piping design for projects ensuring compliance with specifications, budgets, and schedules.
2. Develops project scopes of work, defines piping execution methods and deliverables, and prepares labor hour and scheduling estimates.
3. Promptly recognizes and notifies others of any scope or cost changes, and provides accurate status reports to various project stakeholders including clients, vendors, and other engineering groups.
RIBA plan of work
The Royal Institute of British Architecture charter from 1834 establishes an 11-stage process for construction project management. This document discusses applying the RIBA Plan of Work to the construction of the Amawathura Asapuwa, a 5-story Buddhist temple in Malabe, Sri Lanka. An initial feasibility study was conducted which led to the design of the building. However, increasing the building capacity mid-construction resulted in issues following the RIBA Plan of Work. Proper planning throughout a project is recommended to achieve quality results.
Professional practices (lec 04) by k.iqbal
The estimator must maintain a high degree of organization throughout the estimate development process. A well-organized estimate improves the chances of winning work and completing it on budget. The estimator should keep detailed notes in an estimating notebook for each project, including workup sheets, summary sheets, and notes on calls with architects. When deciding which projects to bid, the estimator considers factors like the type of construction, location, and size to determine if it is a good fit. The estimating process involves carefully reviewing drawings and specifications, visiting the site, obtaining subcontractor bids, and tracking materials costs and quantities on workup sheets before summarizing totals on a bid sheet.
Front End Design Benefits
The document discusses front end design (FED) services provided by Process Engineering Simplified. FED aims to reduce risks, leverage industry expertise, and expedite project schedules. It involves developing process flow diagrams, plant layouts, schedules, equipment specifications, control narratives, cost estimates, site visits, elevation drawings, reviews, balances, and dust hazard analyses to identify risks and develop accurate budgets. Satisfied customers found FED crucial for organized, on-time, on-budget project delivery. Interested customers are encouraged to contact Process Engineering Simplified for assistance from process design to production.
Maaden Exp.
The document outlines the job responsibilities in the engineering department at Maaden Aluminium Refinery. Key responsibilities include identifying projects, preparing business cases and front-end engineering design reports to get feasibility approval, obtaining fund approval by preparing project definition reports, managing the detailed engineering, procurement, and project execution phases, and providing regular reporting to management. Current capital expenditure projects being handled are also listed.
20140311 final report
This document provides guidance and instructions for submitting final reports for projects funded by the Alpine Space Programme 2007-2013. It outlines the documents and sections required for the final report, including a publishable summary of key achievements and lessons learned (Section A), a technical report on project impacts and cooperation (Section B), and a declaration from the lead partner (Section C). Instructions are provided for the last progress report, highlighting the transnational impact and updating the budget. Projects must maintain their website and outputs for at least two years after closure and comply with subsidy contract terms regarding record keeping, dissemination of results, and avoiding substantial project modifications.
Project closing and methods
The document discusses the steps involved in closing a project. It begins by stating that a project has a definite beginning and end, and that the project closing phase involves evaluating if the project's objectives were met. It then lists potential reasons for early project termination such as changing needs or loss of resources. The main steps in project closing are: 1) confirming all work was completed as required, 2) completing any remaining payments, 3) obtaining formal customer acceptance, 4) final performance reporting, 5) handing off the completed project, and 6) releasing all project resources for new work. The document also outlines four methods for closing projects: by extinction, integration, addition, or starvation.
Epc presentation robert foxpresentation
This document discusses engineering, procurement, and construction (EPC) projects and opportunities for improvement through automation. It provides an overview of EPC project challenges, contrasts EPC and architecture, engineering, and construction projects, reviews principal EPC functions and engineering disciplines. It also discusses the evolution of CAD use, levels of modeling including 2D, 3D, 4D, and 5D, and provides a case study of a $2.5 billion EPC copper concentrator plant project in Chile. The document proposes using a work execution package matrix to coordinate material management across spatial divisions and commodity types.
Front end planning
This presentation summarizes the front-end planning process for construction projects. The front-end planning process consists of 5 phases: organization, data generation, evaluation of alternatives, project definition, and decision. Within each phase, key activities are outlined such as creating a project team, gathering site data, identifying and analyzing project alternatives, developing a project definition package, and utilizing decision-making models. Front-end planning provides better project insight and alignment of business and technical goals to improve project success.
Professional practices (lec 05) by k.iqbal
This document discusses the benefits and proper use of computerized estimating. It outlines several key benefits, including increased accuracy through reduced calculation errors, faster estimating speed, and the ability to easily track quantities. However, it also cautions that computers are only a tool and do not replace human thinking. The document reviews advantages and disadvantages of spreadsheets and specialized estimating software, and provides examples of software features like assemblies, reports, and takeoff capabilities.
RIBAPlanofWork2013Template
The document describes the RIBA Plan of Work 2013, which organizes construction projects into key stages from briefing to construction to operation. The stages may vary depending on project needs, and the plan is intended solely as guidance for contracts. It outlines the typical tasks and outputs at each stage, including concept design, developed design, technical design, construction, handover, and building operation.
How To Close-Out Your Project Successfully!
The document outlines 4 steps for successfully closing out a project: 1) Accept the project by signing all necessary documents and providing required certifications. 2) Keep copies of all project documents including change orders, emails, and memos. 3) Prepare closure documents that will be required at substantial completion or project end. 4) Maintain a folder of historical project data for future use. Following these steps will help ensure accurate paperwork and a successful project closeout.
RIBA - PLAN OF WORK
This is a shot presentation of RIBA plan of work based of the pdf provided in the website.
Reference: https://www.architecture.com/knowledge-and-resources/resources-landing-page/riba-plan-of-work
Post Implementation Review Template
This document provides a post-implementation review of a project. It includes an executive summary assessing the overall success of the project and whether objectives were achieved. It also evaluates the project's performance against scope, cost, time, and quality expectations, identifying any deviations from plans. Lessons learned are discussed along with recommendations and an action plan to apply the lessons to improve future projects. The review aims to assess project outcomes and determine if benefits were realized based on user satisfaction with the delivered solutions.
PM-Project Closing-UiTM Project
This document discusses the key aspects of project closing, which involves gaining acceptance of final products and services from stakeholders and customers. Even incomplete projects should be formally closed to learn lessons for future projects. Project closing outputs include archives and lessons learned. Most projects also include a final report and presentation to sponsors or senior management. The project review and closure report is the final document used by senior management to formally close the project by addressing any loose ends. It concentrates on assisting the steering committee to make an informed decision to close the project.
Project management services
The Folson Group is a real estate consultant specializing in reducing operating costs for multifamily buildings and project manage capital projects.
User acceptance-report
This document summarizes a user acceptance report for an IT project. Section A provides general information about the project such as title, dates, and responsible parties. Section B lists the project deliverables and acceptance criteria and whether each criteria was met. Section C describes any outstanding issues and resolution plans. Section D requires signatures from stakeholders to accept the deliverables and resolution plans.
C V
Mohammad Abdullatif has over 12 years of experience in electrical engineering and project management for MEP construction projects. He has managed projects in Saudi Arabia and the UAE, including hotels, commercial buildings, and military bases. His responsibilities included design, site supervision, budgeting, scheduling, and ensuring quality and safety standards were met.
Project proposal document template
This document is a project proposal that provides information about a proposed project including: the project title, working title, sponsoring secretary and agency, contact information, purpose and objectives which are to resolve a business problem and meet strategic goals, description of the proposed solution, schedule, costs, benefits, risks, and required approvals. It seeks funding to develop a solution to address a specific issue and replace current assets or processes.
Front End Engineering Design (FEED) Project Control Training
DEVELOP Training Center (TM) conducts Front End Engineering Design (FEED) Project Control Training, which is very useful to gain skills on how to plan & control projects, as well as navigate and optimize the Project execution.
This training will be useful to gain skills on how to plan & control projects, as well as navigate and optimize the FEED Project execution, such as : FEED Work Order-Scope,FEED Stakeholder identification,FEED Project Deliverables,FEED Multidiscipline Man-hour Calculation-productivity,Engineering-Procurement-Construction Project Contract technical issues-investment Cost Estimation ,FEED Review Cycle,EPC Long lead items,FEED Close out Report-Lessons Learnt
Project management for waste water treatment project
Vivek Dwivedi is an Assistant Project Manager at Cleanflo India Pvt. Ltd. He has a B.Tech in Mechanical Engineering. His responsibilities include costing calculation, drawing preparation, site supervision, material selection, project execution, and tender costing. He discusses key aspects of project management like the project life cycle, triple constraint of quality, time and cost, and areas like scope management, risk management, and change control. A project is defined as a temporary endeavor to create a unique product or service.
COE
Construction Oriented Engineering
How construction can derive Engineering to have a cost and schedule effective project execution.
SCM Engineer(Mechanical) with 3 years Exp
B DURGA SATISH is seeking a career opportunity with a leading corporate company. He has 2.9 years of experience in strategic sourcing, procurement, supply chain management, and quality control. He is proficient in mechanical drawings, cost estimation, and developing local vendors to reduce procurement costs. He has successfully implemented vendor training programs. Durga Satish is educated, receiving a B.Tech in Mechanical Engineering with excellent grades. He is motivated, a quick learner, and works well independently and in a team.
SCM Engineer(Mechanical) with 3 years Exp
B DURGA SATISH is seeking a career opportunity with a leading corporate company. He has 2.9 years of experience in strategic sourcing, supply chain management, vendor development, and quality control. He is proficient in mechanical drawings, cost estimation, and reducing procurement costs. He has successfully implemented vendor training programs and has working knowledge of ERP systems. Currently working as an Engineer at ASA BHANU TECHNICAL SERVICES LIMITED, his responsibilities include quality control, planning, inspection, procurement, and vendor management. He has handled projects for companies like Mitsubishi Electric India, Fuji Furukawa Engineering, and Alstom.
Piping materials engineer
This job posting is for a Piping Materials Engineer position at a global EPC company in West London. The role involves developing piping classes and specifications, compiling data sheets for valves and special piping items, assisting with material requisitions, reviewing supplier documentation, and liaising with engineering disciplines. Key responsibilities include creating piping material specifications, maintaining valve and special item data sheets, and making technical recommendations.
Material approval procedure
The document establishes a procedure for approving construction materials to ensure they conform to design concepts and specifications, including identifying materials, compiling submittal documents, reviewing submittals through various departments, and obtaining client/consultant approval before procuring materials. Key responsibilities include disciplined engineers identifying materials, the QC department reviewing for compliance, and the document control department managing submittals and records. The approval process involves preparing submittal documents, submitting for review, addressing any rejections, and procuring approved materials.
Specification Handout for 4th year civil engineering students
To guide a student with some concept about specifications
Engineering
We provide basic and detailed engineering services for gas and oil projects.
Our team is made up of professionals with wide experience in the design of solutions for pipework projects and installations for the processing, treatment, transport and distribution of natural gas.
Engineering
We provide basic and detailed engineering services for gas and oil projects.
Our team is made up of professionals with wide experience in the design of solutions for pipework projects and installations for the processing, treatment, transport and distribution of natural gas.
Engineering
We provide basic and detailed engineering services for gas and oil projects.
Our team is made up of professionals with wide experience in the design of solutions for pipework projects and installations for the processing, treatment, transport and distribution of natural gas.
More Related Content
What's hot
Front end planning
This presentation summarizes the front-end planning process for construction projects. The front-end planning process consists of 5 phases: organization, data generation, evaluation of alternatives, project definition, and decision. Within each phase, key activities are outlined such as creating a project team, gathering site data, identifying and analyzing project alternatives, developing a project definition package, and utilizing decision-making models. Front-end planning provides better project insight and alignment of business and technical goals to improve project success.
Professional practices (lec 05) by k.iqbal
This document discusses the benefits and proper use of computerized estimating. It outlines several key benefits, including increased accuracy through reduced calculation errors, faster estimating speed, and the ability to easily track quantities. However, it also cautions that computers are only a tool and do not replace human thinking. The document reviews advantages and disadvantages of spreadsheets and specialized estimating software, and provides examples of software features like assemblies, reports, and takeoff capabilities.
RIBAPlanofWork2013Template
The document describes the RIBA Plan of Work 2013, which organizes construction projects into key stages from briefing to construction to operation. The stages may vary depending on project needs, and the plan is intended solely as guidance for contracts. It outlines the typical tasks and outputs at each stage, including concept design, developed design, technical design, construction, handover, and building operation.
How To Close-Out Your Project Successfully!
The document outlines 4 steps for successfully closing out a project: 1) Accept the project by signing all necessary documents and providing required certifications. 2) Keep copies of all project documents including change orders, emails, and memos. 3) Prepare closure documents that will be required at substantial completion or project end. 4) Maintain a folder of historical project data for future use. Following these steps will help ensure accurate paperwork and a successful project closeout.
RIBA - PLAN OF WORK
This is a shot presentation of RIBA plan of work based of the pdf provided in the website.
Reference: https://www.architecture.com/knowledge-and-resources/resources-landing-page/riba-plan-of-work
Post Implementation Review Template
This document provides a post-implementation review of a project. It includes an executive summary assessing the overall success of the project and whether objectives were achieved. It also evaluates the project's performance against scope, cost, time, and quality expectations, identifying any deviations from plans. Lessons learned are discussed along with recommendations and an action plan to apply the lessons to improve future projects. The review aims to assess project outcomes and determine if benefits were realized based on user satisfaction with the delivered solutions.
PM-Project Closing-UiTM Project
This document discusses the key aspects of project closing, which involves gaining acceptance of final products and services from stakeholders and customers. Even incomplete projects should be formally closed to learn lessons for future projects. Project closing outputs include archives and lessons learned. Most projects also include a final report and presentation to sponsors or senior management. The project review and closure report is the final document used by senior management to formally close the project by addressing any loose ends. It concentrates on assisting the steering committee to make an informed decision to close the project.
Project management services
The Folson Group is a real estate consultant specializing in reducing operating costs for multifamily buildings and project manage capital projects.
User acceptance-report
This document summarizes a user acceptance report for an IT project. Section A provides general information about the project such as title, dates, and responsible parties. Section B lists the project deliverables and acceptance criteria and whether each criteria was met. Section C describes any outstanding issues and resolution plans. Section D requires signatures from stakeholders to accept the deliverables and resolution plans.
C V
Mohammad Abdullatif has over 12 years of experience in electrical engineering and project management for MEP construction projects. He has managed projects in Saudi Arabia and the UAE, including hotels, commercial buildings, and military bases. His responsibilities included design, site supervision, budgeting, scheduling, and ensuring quality and safety standards were met.
Project proposal document template
This document is a project proposal that provides information about a proposed project including: the project title, working title, sponsoring secretary and agency, contact information, purpose and objectives which are to resolve a business problem and meet strategic goals, description of the proposed solution, schedule, costs, benefits, risks, and required approvals. It seeks funding to develop a solution to address a specific issue and replace current assets or processes.
Front End Engineering Design (FEED) Project Control Training
DEVELOP Training Center (TM) conducts Front End Engineering Design (FEED) Project Control Training, which is very useful to gain skills on how to plan & control projects, as well as navigate and optimize the Project execution.
This training will be useful to gain skills on how to plan & control projects, as well as navigate and optimize the FEED Project execution, such as : FEED Work Order-Scope,FEED Stakeholder identification,FEED Project Deliverables,FEED Multidiscipline Man-hour Calculation-productivity,Engineering-Procurement-Construction Project Contract technical issues-investment Cost Estimation ,FEED Review Cycle,EPC Long lead items,FEED Close out Report-Lessons Learnt
Project management for waste water treatment project
Vivek Dwivedi is an Assistant Project Manager at Cleanflo India Pvt. Ltd. He has a B.Tech in Mechanical Engineering. His responsibilities include costing calculation, drawing preparation, site supervision, material selection, project execution, and tender costing. He discusses key aspects of project management like the project life cycle, triple constraint of quality, time and cost, and areas like scope management, risk management, and change control. A project is defined as a temporary endeavor to create a unique product or service.
COE
Construction Oriented Engineering
How construction can derive Engineering to have a cost and schedule effective project execution.
What's hot (14)
Front End Engineering Design (FEED) Project Control Training
Front End Engineering Design (FEED) Project Control Training
Project management for waste water treatment project
Project management for waste water treatment project
Similar to Organizational Skills And Technical Competences as LEAD PIPING MATERIAL ENG.
SCM Engineer(Mechanical) with 3 years Exp
B DURGA SATISH is seeking a career opportunity with a leading corporate company. He has 2.9 years of experience in strategic sourcing, procurement, supply chain management, and quality control. He is proficient in mechanical drawings, cost estimation, and developing local vendors to reduce procurement costs. He has successfully implemented vendor training programs. Durga Satish is educated, receiving a B.Tech in Mechanical Engineering with excellent grades. He is motivated, a quick learner, and works well independently and in a team.
SCM Engineer(Mechanical) with 3 years Exp
B DURGA SATISH is seeking a career opportunity with a leading corporate company. He has 2.9 years of experience in strategic sourcing, supply chain management, vendor development, and quality control. He is proficient in mechanical drawings, cost estimation, and reducing procurement costs. He has successfully implemented vendor training programs and has working knowledge of ERP systems. Currently working as an Engineer at ASA BHANU TECHNICAL SERVICES LIMITED, his responsibilities include quality control, planning, inspection, procurement, and vendor management. He has handled projects for companies like Mitsubishi Electric India, Fuji Furukawa Engineering, and Alstom.
Piping materials engineer
This job posting is for a Piping Materials Engineer position at a global EPC company in West London. The role involves developing piping classes and specifications, compiling data sheets for valves and special piping items, assisting with material requisitions, reviewing supplier documentation, and liaising with engineering disciplines. Key responsibilities include creating piping material specifications, maintaining valve and special item data sheets, and making technical recommendations.
Material approval procedure
The document establishes a procedure for approving construction materials to ensure they conform to design concepts and specifications, including identifying materials, compiling submittal documents, reviewing submittals through various departments, and obtaining client/consultant approval before procuring materials. Key responsibilities include disciplined engineers identifying materials, the QC department reviewing for compliance, and the document control department managing submittals and records. The approval process involves preparing submittal documents, submitting for review, addressing any rejections, and procuring approved materials.
Specification Handout for 4th year civil engineering students
To guide a student with some concept about specifications
Engineering
We provide basic and detailed engineering services for gas and oil projects.
Our team is made up of professionals with wide experience in the design of solutions for pipework projects and installations for the processing, treatment, transport and distribution of natural gas.
Engineering
We provide basic and detailed engineering services for gas and oil projects.
Our team is made up of professionals with wide experience in the design of solutions for pipework projects and installations for the processing, treatment, transport and distribution of natural gas.
Engineering
We provide basic and detailed engineering services for gas and oil projects.
Our team is made up of professionals with wide experience in the design of solutions for pipework projects and installations for the processing, treatment, transport and distribution of natural gas.
Debra_Turkovic_RESUME May2015
Debra Turkovic has over 12 years of experience in materials management roles for oil and gas projects. She has extensive experience using SmartPlant Materials and other materials databases to perform material takeoffs, create requisitions, audit quantities, and track materials. Her career highlights include leading teams that improved tracking of isometrics and materials between different project functions. She is proficient in various materials and project management software programs.
Organizational Skills And Technical Competences as LEAD PIPING ENGINEER (...
The lead piping engineer oversees piping engineering for projects by evaluating and approving the EPC contractor's technical submissions and deliverables to ensure compliance with specifications, codes, and standards. This includes checking designs, drawings, material requisitions, and procurement documents. The engineer also monitors construction activities at the site to ensure safety, budget, schedule, and quality requirements are met.
Detail engineering of piping systems
Piping detailed engineering involves the engineering of piping system, its related equipment and other related aspects, Many experts are involved in the process as the piping systems must not fail under any pressure. Hence, detailed engineering of piping systems must be carried out with great accuracy.
Specifications
Specifications provide written instructions distinguishing, limiting, and describing the particular trade of work to be executed. They describe materials, construction methods, quality standards, and other details not shown in drawings. Specifications are one of the key contract documents and are based on the project designs, drawings, workmanship trends, expected quality, equipment, and materials. They clearly specify the design, labor, materials, construction method, equipment, and serve as a guide for bidding, execution, supervision, and defining parties' rights and obligations.
Resume_Latest
This document is a curriculum vitae for Kolaparthi Venkata Sai Pavan Kumar. It outlines his work experience as a Product Design Engineer at Voith Turbo Private Ltd. since 2011, where he is responsible for designing hydraulic couplings and accessories. It also lists his education, including an M-Tech in Engineering Design from Amrita University and a B-Tech in Mechanical Engineering. His skills include expertise in CAD software like UG NX 8.5 and experience handling major projects for clients in industries like power generation.
Allen D. Polowinczak 2016
Allen D. Polowinczak has over 25 years of experience in mechanical engineering and product design. He has extensive experience designing mechanical assemblies, sheet metal components, and plastic parts for outdoor displays, food service equipment, and testing equipment. His experience includes product development from concept through production, managing projects, working with vendors, and ensuring designs meet necessary certifications and standards. He is proficient in CAD software like SolidWorks, AutoCAD, and Inventor and has designed products that have received patents.
Resume_AG
The document is a curriculum vitae for Mr. Ashok Baburao Gunapache, who has over 18 years of experience in piping design, stress analysis, and project management. He currently works as a Principal Engineer at Petrofac Engineering Services Pvt. Ltd. on the KNPC CFP-2020 MAB1 project in Kuwait. Previously, he held stress engineering roles on various oil, gas, and petrochemical projects for companies including Fluor Daniel India Pvt. Ltd., Nauvata Engineering Pvt. Ltd., and Kellogg Brown & Root Asia Pacific Pte Ltd.
Devidas_17.01.17
- Devidas A. Bhaganagare is seeking a position as a Piping Designer with over 8 years of experience in piping design, modeling, and engineering.
- He has extensive experience using software like PDMS, CADWorx, and AutoCAD to create piping layouts, models, isometric drawings, and more for various oil, gas, and industrial projects.
- His past roles include positions at CODE TECH and Thermax Limited where he was responsible for tasks like piping modeling, equipment layout, support design, material take-offs, and more.
Process & power plants
The document summarizes the engineering services provided by Conceptia Software Technologies Pvt. Ltd. related to process plant design. They offer a wide range of design and consulting services including piping, mechanical, electrical, instrumentation, civil and structural engineering. Their team of engineers uses industry standard hardware and software tools to design new systems or modify existing ones according to client requirements and international codes and standards. Their services cover various process industries including oil & gas, chemicals, power plants, and pharmaceuticals.
CV Tanon TH
This curriculum vitae summarizes the experience of Mr. Tanon Thananutsintorn, including over 30 years of experience in piping design, engineering, and project management for oil, gas, and petrochemical projects. He has extensive experience in 3D modeling, design reviews, material takeoffs, and developing as-built drawings. His most recent role was as a Senior Piping Design Engineer with Thai Nippon Steel Engineering & Construction Corp. where he was responsible for piping layouts, equipment coordination, fabrication reviews, and training junior staff.
Ronald Seguritan CV
Ronald B. Seguritan is a structural engineer with over 8 years of experience. He has worked in Qatar since 2011 as a senior design engineer, senior estimation engineer, and currently as a design supervisor for a structural engineering firm. He has extensive skills in structural design, cost estimation, drafting, and project management. He holds a Bachelor's degree in Civil Engineering from the Philippines and is a licensed civil engineer in Qatar.
Similar to Organizational Skills And Technical Competences as LEAD PIPING MATERIAL ENG. (20)
Specification Handout for 4th year civil engineering students
Specification Handout for 4th year civil engineering students
Organizational Skills And Technical Competences as LEAD PIPING ENGINEER (...
Organizational Skills And Technical Competences as LEAD PIPING ENGINEER (...
Organizational Skills And Technical Competences as LEAD PIPING MATERIAL ENG.
- 1. Organizational Skills And Technical Competences As Lead Piping Material Engineer : Significant activities for the role include coordination and supervision of the following: 1. Develop new Piping Material Classes Specification or manage and select the proper Client's (Company) Piping Classes to comply with Project requirements. 2. Develop material, insulation and coatings specifications. 3. Develop line list. 4. Elaboration of Valve Data Sheets. 5. Identify and list special piping items . 6. Perform pipe wall thickness calculations and branch reinforcement calculations. 7. Assist in development of the Request for Quotation packages . 8. Directs and provide guidance in the preparation of Technical Bid Evaluation (TBE), Purchase Requisition (PR), and Purchase Order (PO) of piping materials . 8. Review bid tabulations and substitutions for technical acceptability. 9. Make valve take-off from P&ID’s. 10. Make preliminary MTO and input to the computer using P&ID’s,flow diagrams, transpositions, miscellaneous piping details and material sketches from piping design, intermediate MTO and input to the computer for purchasing and final MTO and prepare piping bills of materials. 11. Requisition preparation and technical evaluation of vendor documentation. 12. Checks/Approves vendor drawings and documents.