Effective O&M strategies to deliver efficiencies, increase output and reduce outage times to improve ROI
•Preparing for Maintenance: Recognize the importance of predictive and preventative maintenance when planning repairs to ensure maintenance tasks run smoothly
•Understand Costs and Optimize ROI:Discover how you can plan refurbishments and upgrades to improve operations and increase your annual income
•Plant Reliability Assessment: Learn about plant equipment to ensure it will continue to perform to meet your expectations in the future
•Safety & Regulatory Update:Ensure adequate safety margins and regulatory compliance and understand why this is critical to your customers, employees and shareholders
•Resources & The Workforce: Understand the demand for personnel across the industry and how this may put a strain on your resources for O &M
Shutdowns and Turnarounds 2010, is taking place from 28 November – 1 December 2010 in Cairo, Egypt.
Shutdowns and turnarounds impact the maintenance budget severely and if not managed efficiently will have a major impact on the organization’s bottom line. Whilst the global economy recovers and Oil and Gas prices are volatile it is crucial to avoid costly unplanned shutdowns. Therefore efficient planning, scheduling and cost management are required to ensure successful shutdowns and turnarounds.
Local and international industry experts from the oil, gas and petrochemical industries will gather to address advanced strategies to optimise the turnaround process.
Overvoltages are an increase of voltage on the electric line, measure between two conductors, which can produce damage on the installations
and the electric equipments.
There are two different types: transient and permanent.
Permanent or power frequency overvoltages are characterized by relatively long duration (several cycles) There are usually caused by:
- Defect connection of the neutral.
- Power consumption lowered.
Transient overvoltages are very short duration increases in voltage
between two conductors or between a conductor and the ground. They
can be on account of atmospheric electrical discharges (lightning), by
switching or by electrical faults (contact with earth or short circuit).
Shutdowns and Turnarounds 2010, is taking place from 28 November – 1 December 2010 in Cairo, Egypt.
Shutdowns and turnarounds impact the maintenance budget severely and if not managed efficiently will have a major impact on the organization’s bottom line. Whilst the global economy recovers and Oil and Gas prices are volatile it is crucial to avoid costly unplanned shutdowns. Therefore efficient planning, scheduling and cost management are required to ensure successful shutdowns and turnarounds.
Local and international industry experts from the oil, gas and petrochemical industries will gather to address advanced strategies to optimise the turnaround process.
Overvoltages are an increase of voltage on the electric line, measure between two conductors, which can produce damage on the installations
and the electric equipments.
There are two different types: transient and permanent.
Permanent or power frequency overvoltages are characterized by relatively long duration (several cycles) There are usually caused by:
- Defect connection of the neutral.
- Power consumption lowered.
Transient overvoltages are very short duration increases in voltage
between two conductors or between a conductor and the ground. They
can be on account of atmospheric electrical discharges (lightning), by
switching or by electrical faults (contact with earth or short circuit).
Let’s be honest: maintenance is not the most glamorous topic milling. It is rarely something that gets people excited or attracts a great deal of new inventions and technologies. However, I hear time and time again that well looked after equipment is just as important as raw materials in producing a top quality end product.
Automotive IQ, a division of IQPC, is the number one choice for information exchange in the automotive industry. Our comprehensive events provide an unbiased, focused forum where you can discuss and learn about the issues most important to you. We put a range of industry challenges under the spotlight in our events and articles to examine how to solve these issues in the context of todays business climate.
The goal is to optimize processes around the use of our assets, to drive new opportunities wrapped around a model of predictive and preventive maintenance. You will learn how to:
• Prepare for this year of cost containment and savings with expert advice on how to self
fund your remote service project
• Use existing product offerings to create new revenue streams and address declining profits
• Mine real-time and historical data to improve customer understanding, touch and experience
• Decrease service costs through more efficient deployment and centralized management
• Use device connectivity to maintain and enhance your own differentiators rather than being a carbon copy of your competitor
• Increase customer awareness of remote service benefits and increase customer satisfactionthrough improved promotion, measurements, and value reinforcement techniques
2nd Thin Film Solar Summit Europe- March 2010guest34b6a5d
2nd Annual THIN FILM SOLAR SUMMIT Brochure. This fantastic event will set out how to scale up your thin film business in Europe – improve efficiency, lower costs and secure financing. Plus, get the latest on price pressure, the creation of an industry infrastructure and up to date market expectations. The conference will provide a comprehensive analysis of the thin film industry and its key challenges in an interactive manner. Leading companies will share their experiences through panel debates and high-level presentations. A great opportunity to network with the whole thin film community, not to be missed!
"IPQC’s The Remote Device Monitoring Summit is the only North American cross-industry remote diagnostics and smart services event for service executives. It will provide you a chance to network with industry thought leaders in prognostics, data analytics, services marketing and remote tools in highly complex environments. This summit will serve as a roadmap for remote service deployment combining both business and technology aspects of deployment projects. Join us as we review these key points and more:
Remote Services Deployment Project Management Customer in Focus Connectivity Models It’s all About Data! Next Steps in the Journey
"
Well Plugging and Abandonment Conference BrochureDean Murphy
Execute Well P&A projects in an efficient, safe and timely manner whilst keeping project costs to a minimum
Get the direction and tools you need to build a comprehensive well plugging and abandonment strategy that will ensure project success and cost-effective execution of your well P&A tasks. Join over 200 senior decision makers to exchange updates, network and do business. For more information get the conference brochure here!
Well Integrity Analysis: Learn from tried and tested methods for assessing the mechanical condition of a well to ensure your P&A projects run without disruption
Drive Efficiencies and Reduce Costs: Review your current P&A strategies to make additional cost savings through effective scheduling and coordination of all activities
Regulatory Landscape: Gain a full understanding of legislative requirements, expectations and recommended practices to ensure compliance on your future P&A projects
P&A Project Execution: Utilize tried and tested project management techniques to ensure safe and effective plugging and abandonment execution
Technology and Equipment: Examine the latest technological innovations to ensure your P&A project is delivered in a more timely and cost effective way
Andy Hill from Oniqua, a solution provider at the marcus evans Energy CFO Summit 2012, on the importance of adopting a proactive maintenance strategy.
Interview with: Andy Hill, Chief Executive Officer & Co-Founder, Oniqua
Seems to be an interesting event, I will share it for whom they are interested.
The Global Oil & Gas, Energy Asset Integrity, Maintenance & Inspection Management Summit - 28-29 April 2016 Berlin.
For more details, visit the Event Website : http://aims-2016.com
Let’s be honest: maintenance is not the most glamorous topic milling. It is rarely something that gets people excited or attracts a great deal of new inventions and technologies. However, I hear time and time again that well looked after equipment is just as important as raw materials in producing a top quality end product.
Automotive IQ, a division of IQPC, is the number one choice for information exchange in the automotive industry. Our comprehensive events provide an unbiased, focused forum where you can discuss and learn about the issues most important to you. We put a range of industry challenges under the spotlight in our events and articles to examine how to solve these issues in the context of todays business climate.
The goal is to optimize processes around the use of our assets, to drive new opportunities wrapped around a model of predictive and preventive maintenance. You will learn how to:
• Prepare for this year of cost containment and savings with expert advice on how to self
fund your remote service project
• Use existing product offerings to create new revenue streams and address declining profits
• Mine real-time and historical data to improve customer understanding, touch and experience
• Decrease service costs through more efficient deployment and centralized management
• Use device connectivity to maintain and enhance your own differentiators rather than being a carbon copy of your competitor
• Increase customer awareness of remote service benefits and increase customer satisfactionthrough improved promotion, measurements, and value reinforcement techniques
2nd Thin Film Solar Summit Europe- March 2010guest34b6a5d
2nd Annual THIN FILM SOLAR SUMMIT Brochure. This fantastic event will set out how to scale up your thin film business in Europe – improve efficiency, lower costs and secure financing. Plus, get the latest on price pressure, the creation of an industry infrastructure and up to date market expectations. The conference will provide a comprehensive analysis of the thin film industry and its key challenges in an interactive manner. Leading companies will share their experiences through panel debates and high-level presentations. A great opportunity to network with the whole thin film community, not to be missed!
"IPQC’s The Remote Device Monitoring Summit is the only North American cross-industry remote diagnostics and smart services event for service executives. It will provide you a chance to network with industry thought leaders in prognostics, data analytics, services marketing and remote tools in highly complex environments. This summit will serve as a roadmap for remote service deployment combining both business and technology aspects of deployment projects. Join us as we review these key points and more:
Remote Services Deployment Project Management Customer in Focus Connectivity Models It’s all About Data! Next Steps in the Journey
"
Well Plugging and Abandonment Conference BrochureDean Murphy
Execute Well P&A projects in an efficient, safe and timely manner whilst keeping project costs to a minimum
Get the direction and tools you need to build a comprehensive well plugging and abandonment strategy that will ensure project success and cost-effective execution of your well P&A tasks. Join over 200 senior decision makers to exchange updates, network and do business. For more information get the conference brochure here!
Well Integrity Analysis: Learn from tried and tested methods for assessing the mechanical condition of a well to ensure your P&A projects run without disruption
Drive Efficiencies and Reduce Costs: Review your current P&A strategies to make additional cost savings through effective scheduling and coordination of all activities
Regulatory Landscape: Gain a full understanding of legislative requirements, expectations and recommended practices to ensure compliance on your future P&A projects
P&A Project Execution: Utilize tried and tested project management techniques to ensure safe and effective plugging and abandonment execution
Technology and Equipment: Examine the latest technological innovations to ensure your P&A project is delivered in a more timely and cost effective way
Andy Hill from Oniqua, a solution provider at the marcus evans Energy CFO Summit 2012, on the importance of adopting a proactive maintenance strategy.
Interview with: Andy Hill, Chief Executive Officer & Co-Founder, Oniqua
Seems to be an interesting event, I will share it for whom they are interested.
The Global Oil & Gas, Energy Asset Integrity, Maintenance & Inspection Management Summit - 28-29 April 2016 Berlin.
For more details, visit the Event Website : http://aims-2016.com
GLOBAL ASSET INTEGRITY, MAINTENANCE & INSPECTION MANAGEMENT SUMMIT 2016PAUL Carbony
I have found this event in internet, seems interesting so I am sharing it for mutual benefits.
GLOBAL ASSET INTEGRITY, MAINTENANCE & INSPECTION MANAGEMENT SUMMIT BERLIN 28th-29th April 2016
• Prioritising asset integrity activities at a time of softening oil prices
• Next generation inspection and maintenance methods and strategies for more efficient and safer production
• Case studies focusing upon asset life span extension
• Corrosion and erosion detection and treatment strategies
• Risk mitigation and management through analysis and performance indicators
• Back to the Future of Asset Management
For More details please contact Roland Muller - Project Director
roland.muller@zenith-energie.com
TEL :+420 228 882 141
FAX : +420 227 204 904 Website : www.aims-2016.com Mail : registration@zenith-energie.com
IQPC's 8th Shutdowns and Turnarounds 2011JBScott44
After years of fantastic feedback, Oil and Gas IQ's successful Shutdowns and Turnarounds Forum returns for its 8th year. This is the largest gathering in Europe of shutdown, outage, maintenance and turnaround professionals across a range of continuous processing industries for two days of pure information sharing and networking.
This year's conference agenda includes leading contractors, consultants and technological experts including representatives from Shell, RWE npower and Air Liquide who will analyse HSE, costing, time lining, scope management, technology and efficiency best practice.
Energy Efficiency Innovation Driver or heavy Burden?Mateus Siwek
The Study provides information on
› Specific cost-saving opportunities
› Potentials of different technologies and their ROI
› Opportunities for financial support
› tasks and assistance for an energy manager
› Strategic implementation of energy efficiency measures and generation
of advantages for the site
› Energy management
› Economic and legal Framework conditions
› Pervasion and success of different energy efficiency measures
Plan your project finance strategy, mitigate risk and secure investment for new nuclear construction
Loan Guarantee Update: Hear from the DOE Loan Programs Office and learn how to secure government backing for your project
EPC Contract Negotiation: Understand how to structure EPC contracts to avoid disputes and reach a mutually beneficial agreement
Mitigate Finance Risks: Learn how to identify and mitigate financial risks to ensure you create a bullet-proof project finance strategy
Alternative Funding Methods: Hear how to secure alternative funding to aid the construction of your new nuclear facility
Policy and Market Update: Learn about the current US energy policies and hear how future changes could affect nuclear financing
1. Researched & Organised by: What has been said about our nuclear conferences?
"Comprehensive and informative - good insight into lessons learnt"
Mark Peres, Executive Project Director, Fluor
Nuclear Maintenance and Plant SAVE
Modernization Conference €400
register before
May 25-26, 2011. Brussels, Belgium, Novotel Tour Noire Hotel March 18th
E ective O&M strategies to deliver e ciencies,
increase output and reduce outage times to
improve ROI KEYNOTE PRESENTATION FROM:
Preparing for Maintenance: Recognize the
importance of predictive and preventative
maintenance when planning repairs to ensure
maintenance tasks run smoothly & e ciently
European Commission
Understand Costs and Optimize ROI: Discover
how you can plan refurbishments and upgrades to UTILITY PERSPECTIVES FROM:
maximise power output and increase revenues
Plant Reliability Assessment: Learn about the
latest plant equipment developments to help
maximise plant performance
Safety & Regulatory Update: Ensure adequate
safety margins and regulatory compliance and
understand why this is critical to your customers,
OTHER EXPERTS FROM:
employees and shareholders
Resources & The Workforce: Understand the
demand for personnel across the industry and how
this may put a strain on your resources for O&M
EXCLUSIVE GAME-CHANGING INFORMATION INCLUDING:
• Review regulations and legislations for the operating fleet with the
European Commission
• Hear up-to-date case studies from key utilities/owners in Sweden,
Czech Republic, Switzerland, Belgium, Slovenia and more
• Understand the business case for aging management and life
extension... is it worth your time and money?
For the latest speaker line up and agenda updates please visit:
www.nuclearenergyinsider.com/2011
2. Researched & Organised by:
Your definitive blueprint for developing a
cost e ective O&M strategy
Dear Colleague, What We Are Going To
New build, new build, new build… What about the current fleet? With Do For You?
utilities in Europe taking huge strides to secure life extensions for their
operating fleet, it is more important than ever to understand the Practical information and knowledge
options available for refurbishment, modernization and general sharing are at the forefront of our
maintenance. Nuclear Maintenance and Plant
Modernization Conference. We are
With the announcement from EDF to look at 60 year lifetimes for their
current fleet in France, costing approximately €400 to €600 million per
committed to ensuring that you not
unit, maintenance issues are costly but necessary. Operation and only go away with new contacts but
maintenance costs are country-specific but depend heavily on the an up-to-date, relevant wealth of
utility managing the plant. They include manpower costs, annual O&M information so that you can leave
investments, periodic equipment replacement, national and regional
knowing how your business is going
taxes, insurance and company overheads. O&M costs are a major slice
of a utility’s spend and are estimated to be around 25% of a NPPs to move forward…
yearly budget.
With 196 operating nuclear plants across Europe, there are a large 1 Prepare for understanding
projects by
future maintenance
number of owners who will be assessing the prospects of life
extensions and the subsequent maintenance tasks that follow. It is
predictive and preventative
more important than ever to learn from the experts who have maintenance
implemented successful refurbishment strategies for their operating
plants. 2 for maintenancefull extentensure
Understand the
work to
of costs
Maintenance and modernization projects are costly and technically that your plans will recoup an
challenging. If costs and outage times are to be reduced then careful optimal return on investment
planning is required and common sense strategies must be put in place.
In order to do that some of the following challenges will be faced:
3 Assess the reliability equipment will
to understand what
of your plant
• Maintaining operational safety continue to perform to meet your
• Long-term operations strategy
future expectations
• Refurbishment planning
•
•
Makeup, aging and obsolescence
Reliability of equipment performance 4 Hear about theensure you have a
resources and
demand for new
• Preventive and predictive maintenance
• Resources and availability
suitable workforce to carry out
future projects
The Nuclear Maintenance and Plant Modernization Conference will
supply your business with the critical intelligence and tools you need to
understand e ective O&M strategies to deliver e ciencies, increase Who will be there?
output and reduce outage times to improve ROI. Delivered by the best Senior level decision makers from
in the industry – you’ll be able to take away key lessons and real world utilities/owners who want to discover the
action points that you can implement to save millions of €uro’s. latest technologies and services for planning
and executing nuclear maintenance and
The conference will be bringing together 150 operations and refurbishment projects.
maintenance experts for two days of business critical intelligence,
unrivalled networking and stimulating discussion. With senior level
representatives from European utilities, lead contractors and equipment
Utility/Owner
30%
providers and specialist service companies – can you a ord to miss
out? Lead Contractor
30%
I look forward to seeing you in Brussels in May. Sub Contractor
10%
Kindest regards, Specialist Services
10%
Dean Murphy
Senior Industry Analyst
Public Sector
7%
Nuclear Energy Insider
Tel: +44 (0) 207 375 7204
Email: dmurphy@eyeforenergy.com
Consultant
7%
Other
6%
Register today - visit www.nuclearenergyinsider.com/2011
or phone +44 (0)207 375 7575
3. Look at some of the companies that have been to Nuclear
Energy Insider conferences over the last 12 months...
Ainscough Vanguard EnergySolutions Royal Institute of Technology
Alstom Power Entergy SCANA
AMEC Nuclear Environment Agency Serco
American Electric Power Eskom Shaw Group
American Nuclear Insurers Exelon Siemens
American Nuclear Society Export-Import Bank of USA Societe Generale
AREVA Florida Power & Light Company Southern California Edison
Arizona Public Service Co. Fluor Southern Company
Axpo GE Tokyo Electric Power (TEPCO)
Babcock & Wilcox GE Hitachi TVA
BAE SYSTEMS Health & Safety Executive UKAEA
Balfour Beatty Civil Engineering Iberdrola Ingenieria y Construccion UniStar Nuclear
Bechtel INPO United Nations
BNP Paribas Jacobs Urenco
CENG LLWR URS
CH2M HILL Luminant US Department of Commerce
Clydeunion Magnox North US Department of Energy
Coface Mammoet US Department of State
Curtiss Wright Flow Control Mitsubishi Nuclear Energy Systems US Nuclear Regulatory Commission
Dominion National Nuclear Laboratory USEC
DSRL National Skills Academy for Nuclear Westinghouse
Duke Energy Nuclear Research Institute WorleyParsons
EDF Ontario Power Generation XCEL
Electric Power Research Institute Progress Energy
Embassy of France PSEG
Emirates Nuclear Energy Corporation Rolls Royce
READ WHAT YOUR PEERS THOUGHT OF OUR PAST EVENTS…
WHY YOU CANT MISS OUT ON THIS
UNBEATABLE OPPORTUNITY!
“Good cast of speakers, great structured programme with
right mix of plenary sessions and networking”
1 CONNECTIONS - only the best of the
Steve Wheeler, Director of Nuclear Development, Serco best from the nuclear industry will be in
attendance
“Good cross section of those typically involved in Power 2 FACTS - solid, hard hitting presentations
filled with facts about maintenance
Uprates Engineering, Project Management, legal, NSSS, BOP strategies needed to push projects
& Construction.” forward
Sharon Eldridge, Design Engineering, Exelon Generation Co
3 INSPIRATION - get fresh insights
through lively discussions with your
“Great opportunity to network. Learn from industry operating peers
experience, avoid pitfalls.”
4 PRACTICAL IDEAS - hear the best tips,
Ted Williams, Superintendent EPU Design, Progress Energy strategies and practical knowledge that
will help you directly in your day-to-day
work
"This years event provided clear insights into the issues facing
the nuclear power industry today. The information presented 5 SAVE TIME - how long would it take for
you to meet all the industry’s leading
was timely and relevant" players? Buy a ticket to the summit and
Kevin Hutto, Solutions Architect, Bentley Systems meet them all in just two days
Register today - visit www.nuclearenergyinsider.com/2011
or phone +44 (0)207 375 7575
4. Why should you be at the Nuclear Maintenance and
Plant Modernization Conference in May?
Conference Floor Plan: The Nuclear Maintenance and Plant Modernization
RE
GI
ST
RA
CONFERENCE ROOM
Conference offers you an excellent range of
TI
ON sponsorship and exhibition opportunities to suit every
need and budget. We can literally tailor make a
sponsorship package to your needs meaning that you
can speak, build your brand and ultimately get
3 2 1 exposure for your services and technology in front of
the leading maintenance stakeholders. Do not miss
out on this unrivalled opportunity to do business and
COFFEE STATION
secure sales from the Nuclear O&M Industry!
4 VERY LIMITED SPACE
1 Enforce your brand and
AVAILABLE…
6 promote your services
Contact us now to secure your spot!
5 2 Generate and grow your Opportunities available include:
customer base
3 Meet senior level decision • 1 to 1 meetings with key decision makers
makers and do business • Take a speaking slot and address over 150
industry leaders
BUSINESS
CENTRE 4 Make new contacts and build
lasting relationships • Show off your latest products and services in the
exhibition hall
• Build your brand with exclusive promotional
opportunities
Past sponsors and exhibitors at Nuclear Energy • Host interactive workshops, networking sessions
Insider Conferences Include: and secure high level branding of conference
materials
Limited opportunities available!
Call Everad MacIndoe today to discuss the
options and secure your space to ensure you fill your
sales book for the next 18 months!
Everad MacIndoe
Business Development Director,
Nuclear Energy Insider
US TOLL FREE: 1 800 814 3459 ext. 7560
E: emacindoe@eyeforenergy.com
Unlike many other Build your own package in 3 easy steps
industry trade shows,
1. MAKE A LIST OF YOUR 2. WORK OUT YOUR 3. CALL EVERAD AT
exhibitions and
MOST IMPORTANT AIMS BUDGET EYEFORENERGY TO
conferences our DISCUSS YOUR PACKAGE
• Exhibition booth Speak with your marketing
packages are not team and decide on your
NOW!
standard • Brand visibility annual conference Our exhibition space regularly
investment sells out weeks in advance of the
“one-size-fits-all”. You • Private meetings conference. So call today to
– make sure you assign the
tell us what you want • Breakfast briefings right budget to the right
make sure you secure your spot
before you miss the chance.
and we build it for you… show! No matter what your
• Seatdrops budget total, we will work
simple! Take 3 simple CALL NOW
• Speaking slots with you to build a package Everad MacIndoe
steps to build your very that achieves your aims Business Development Director,
own package today and • Conference Materials and exceeds expectation Nuclear Energy Insider
Branding US TOLL FREE: 1 800 814 3459
we will build it whatever ext. 7560
your budget! • Segment Sponsor E: emacindoe@eyeforenergy.com
Register today - visit www.nuclearenergyinsider.com/2011
or phone +44 (0)207 375 7575
5. THIS IS YOUR BLUEPRINT TO ENSURE SUCCESSFUL DAY 1 - MAY 25th 2011
AND EFFICIENT O&M PROJECTS...
Section 1 – Operational Safety and Regulatory Swedish Case Study: Plant modernization and life time
Issues extension at Ringhals AB
• Understand the complexity of plant modernization and life
time extension to help ensure that your future projects run
European Commission: Legislations for the operating smoothly
nuclear fleet • Hear about lessons learned by Vattenfall regarding
• Understand current regulations and legislations in place to modernization projects in 2009/2010
ensure safety during O&M tasks Lars Eliasson, Vice President Ringhals AB, Vattenfall
• Review the work that the European Commission are doing to
aid the operating nuclear fleet Oskarshamn Case Study: Modernization of Unit 2
• Lessons learned from past O&M projects to ensure optimum • Review the safety and reliability aspects of work taking place
safety for your projects at Oskarshamn 2
Massimo Garriba, Legal Questions & Euratom Coordination, • Take a look at the design and manufacturing work and how
International Relations – Nuclear, European Commission the challenges causing project delays have been overcome
• Moving on to the final step: Looking forward to the
Assuring adequate safety margins after completion of the project in 2013
modification/modernization projects
• Understand the attributes of a strong preliminary and final USA Case Study: Cross-Geographical Learning
safety analysis • Hear about the business case drivers that support
• Learn about technical specifications for modernization refurbishment work in the USA
projects • Learn about OPPD’s Fort Calhoun Station refurbishment work
• Assure sufficient safety margins during upgrade tasks including the replacement of its steam generators,
Hoa Hoang, Power Uprate Product Line Leader, GE Hitachi pressurizer, reactor vessel head and low pressure turbines
Nuclear Energy • Assess the effectiveness of the work – was the refurbishment
a beneficial investment?
UK SAPS justification requirements for support of plant Arun Mani, Partner, Global Energy Consulting Practice, PA
modifications Consulting
• Fully understand the PWR safety margins and safety analysis
requirements for plant modifications Section 3 – Business Case
• Review the UK requirements for modifications and compare
them with international practice Business case for aging management and life extension
• Hear about the necessities of compliance with current and • Should we be investing in modernization now or focus our
new regulations and how this is critical to your customers, efforts elsewhere?
employees and shareholders • Understand all costs associated with operations and
Dr John Lillington, Chief Reactor Technologist/ Manager, Power maintenance and whether refurbishment and modernization
Generation, Serco is a good financial option for your sites
• Understand whether your plant modernization efforts will
Section 2 – Utility Case Studies and provide a sufficient return on investment?
• Take a look at how you can plan refurbishments and upgrades
Cross-Geographical Learning to levelize your spending
John Fownes, Growth Leader, Aging Management,
Swiss Case Study: Strategy for long-term operation of
Westinghouse
the NPP Beznau Unit 1 and 2 (KKB)
• Gain an understanding of the requirements and remits faced
Insurance
by AXPO when evaluating for extended operation at NPP
• Evaluate nuclear insurance risk to aid future maintenance and
Beznau
refurbishment projects
• Hear how AXPO mitigated potential risks when planning their
• Understand third party liability and how this will affect your
forward strategy and how this can be implemented on similar
projects
projects
Mark Tetley, Managing Director, Nuclear Risk Insurers Ltd
• Hear how AXPO managed plant staff and materials in order to
Dr Mike Peach, Technical Manager, Nuclear Risk Insurers Ltd
ensure successful project execution
• Simple steps you can take to ensure your future operations
are economically viable Networking Drinks Reception:
Herbert Rust, Deputy Site Director, Axpo AG
On the evening of May 25th, Nuclear Energy Insider
Czech Republic Case Study: Long-term refurbishment are hosting the networking drinks reception of the
planning at Dukovany NPP year. Enjoy a relaxed evening of networking with
• Understand the importance of creating a forward plan looking executive decision makers from the entire nuclear
at the history and maintenance records of your nuclear site community. Use this amazing opportunity to build
• Understand the essentials of equipment replacement, material
vital relationships which will help your projects
concerns and ageing management
• Create a blueprint for capital increase before performing
throughout 2011 and the future! This unique evening
modernization tasks will gather everyone you need to talk to, all under one
Jaroslav Jakub, Maintenance Manager, Dukovany NPP, ČEZ roof, for one night only!
Register today - visit www.nuclearenergyinsider.com/2011
or phone +44 (0)207 375 7575
6. ...AND YOUR CHANCE TO MEET THE BEST Day 2 - May 26th 2011
IN THE INDUSTRY
Section 4 – Plant Reliability and Efficiency Retrofitting – dealing with mechanical issues
• Understand the importance of spending your money on
A long-term approach to operations after 40 retrofitting to deal with potential long-term issues
• Understand the evaluation of long-term operations to ensure • Take a look at some relevant case studies of retrofitting
future safe operations projects from around the globe
• Understand the financial impacts of life extensions and future Alstom Power
operations
• Review the work that Electrabel have been implementing to Preventive and predictive maintenance
ensure long-term operations • Understand the importance of the following during
Geert Backaert, Project Manager Long Term Operation, modernization
Electrabel o Repair
o Inspection
Strategies for make up, ageing & obsolescence o Surveillance
• Discuss the different possible strategies for make up for o Workforce
ageing & obsolescence with an in-depth look at: • The importance of predicative maintenance, why we need to
o components storage do this and how to build our strategy towards this
o cloning with FPGA (field-programmable gate array)
o new system Section 5 - Resources
Equipment obsolescence The role of contractors
• Hear how you can find replacement parts during • Understand what resources are needed from contractors for
refurbishment and ensure delays are avoided - Is the supplier specific tasks and how they should be utilized
for that system or component still in business? • Understand whether or not contractors will have the
• How Investing heavily into equipment by utilities will help to resources available to you to ensure work is not delayed or
avoid future difficulties during modernization attempts postponed
• Understand the importance of whether or not your plant Steve McClure, Vice Chairman, Britain’s Energy Coast Business
system is able to operate reliably for future years without Cluster
significant investment
• Understand whether or not it is a better long-term investment Market entry for new companies
to buy a new component or reverse-engineer the ones you • Fully understand the standards and quality levels that are
have - can you obtain the parts? required to gain entry into the nuclear market
• Hear about the health and safety requirements that will be
Implementation of enterprise asset management essential to help position your organization in the industry
• Gain an understanding as to why NEK have decided to opt for • Gain a clear understanding of the skills required for you to
Oracle eAM to support the maintenance process at NPP Krsko become active in the nuclear market
• Hear about the experience that has been gained from the
implementation of the project by NEK The French resources experience
• Understand the developments of the Oracle Nuclear Power • Understand how the International Nuclear Academy are
Generation vertical solution and how it could help your working to bridge the skills gap in France
maintenance projects • Learn about the proactive initiatives being implemented by
• Review the NPGSIG (Nuclear Power Generation Special the French industry to overcome the lack of skills and
Interest Group) initiative that is currently in place resources within the industry
Zeljko Reljic, EBS Implementation Project Manager, NEK Anne-Sophie Defay, Business Development O cer,
Stane Moškon, Partner, OSIR International Nuclear Academy
(Representative of the Burgundy Nuclear Partnership)
Long-term investment planning
• Understand the importance of knowing the plant condition by
looking at the history and maintenance records of the
systems, structures and components
• Learn about the essentials of material concerns, ageing
EASY WAYS TO REGISTER TODAY!
management and equipment replacement
• Hear how to create an investment plan for modernization ONLINE:
tasks and how to do this for your projects www.nuclearenergyinsider.com/2011
Wolfgang Däuwel, Vice-President, Technical Center, Areva
E-MAIL:
Reliability of a power plant
• Are you confident that your equipment will continue to
info@nuclearenergyinsider.com
perform to meet your expectations in the future?
FAX:
• Understand how we can maintain the reliability of our plant
• Hear tips on how to increase our time online to 95%-97% + +44 (0)207 375 7576
CALL:
Sign up to our free nuclear newsletter
+44 (0)207 375 7575
www.nuclearenergyinsider.com
Register today - visit www.nuclearenergyinsider.com/2011
or phone +44 (0)207 375 7575
7. Researched & Organised by:
“This conference exceeded my expectations in many ways. The program content
and quality of speakers was excellent.”
Thomas Williamson, Vice President - New Plant Market Strategy, AREVA NP
Nuclear Maintenance and Plant
Modernization Conference SAVE
€400
May 25-26, 2011. Brussels, Belgium, Novotel Tour Noire Hotel register before
March 18th
Conference Pricing DATE & LOCATION:
Below you can find the complete pricing May 25-26, 2011. Brussels, Belgium
structure for the 2011 Maintenance and
Modernization Conference. Please note we Group Discounts, Play it Smart, Bring Your Team
Come along with members of your team and take advantage of Nuclear
have 3 options available and that we also have
Energy Insider’s special group discounts. The more attendees you sign
dates when the prices of the passes will up, the more money your company saves!
increase. Below you can find out what benefits Visit www.nuclearenergyinsider.com/2011
you’ll receive from each pass type. or call today on +44 (0)207 375 7575
1. SELECT YOUR REGISTRATION PACKAGE
Super Early Bird Price Early Bird Price Standard Price
Before March 18th Before April 15th
Platinum
• Full 2 day pass
• Full summit documentation
• Access to all lunches, breaks + €1495+ VAT €1695+ VAT €1895+ VAT
networking party
• Audio & Visual Access Post
Conference
Gold
• Full 2 day pass
• Full summit documentation €1295+ VAT €1495+ VAT €1695+ VAT
• Access to all lunches, breaks +
networking party
Audio Visuals
• Audio & Visual Access Post €395+ VAT
Conference
*NB: FULL PAYMENT MUST BE RECEIVED BEFORE THE EVENT
Enter the discount code when
2. ENTER ATTENDEE DETAILS DISCOUNT CODE: BROCHURE50 you register to save €50
Mr / Mrs / Ms / Dr: _________________ First name: ______________________________ Last name: _________________________ Company:______________________
Position / Title: ____________________________________________________________Telephone: ___________________________ Fax: _________________________
E-mail: ______________________________________ Country: ____________________ Address: _____________________________ Postcode: ____________________
3. PAYMENT OPTIONS
I enclose a cheque/draft for: €____________ (payable to FC Business Intelligence Ltd) Credit card number: __________________________________________________
Please invoice my company: € ____________ Purchase Order No.: __________ Expiry date: _______________ Security Number (last three digits on back) ________
Please charge my credit card: € _______________________________________ Name on card: ______________________________________________________
Amex Visa Mastercard Signature:_____________________________ Country:______________________
MORE EASY WAYS TO REGISTER TODAY!
FAX THIS FORM BACK TO ONLINE: www.nuclearenergyinsider.com/2011
+44 20 7375 7576 E-MAIL:
FAX:
info@nuclearenergyinsider.com
+44 (0)207 375 7576
CALL: +44 (0)207 375 7575
Terms & Conditions The organizers reserve the right to make changes to the program without notice.
Places are transferable without any charge. All prices displayed are exclusive of vat unless otherwise stated but, vat will be charged, where applicable,
Cancellations before April 25, 2011 incur an administrative charge of 25%. at the prevailing rate on the invoice date and the relevant details will appear on the invoice.
If you cancel your registration on or after April 25, 2011 we will be obliged to charge you the full fee. FC Business Intelligence Limited takes every care to ensure that prices quoted are correct at time of
Please note - you must notify FC Business Intelligence Limited in writing of a cancellation, or we will be publishing however, bookings will only be accepted if there is no material error in the price advertised on
obliged to charge you the full fee. the website.
8. Researched & Organised by: What has been said about our nuclear conferences?
"Comprehensive and informative - good insight into lessons learnt"
Mark Peres, Executive Project Director, Fluor
Nuclear Maintenance and Plant SAVE
Modernization Conference €400
register before
May 25-26, 2011. Brussels, Belgium, Novotel Tour Noire Hotel March 18th
E ective O&M strategies to deliver e ciencies,
increase output and reduce outage times to
improve ROI KEYNOTE PRESENTATION FROM:
Preparing for Maintenance: Recognize the
importance of predictive and preventative
maintenance when planning repairs to ensure
maintenance tasks run smoothly & e ciently
European Commission
Understand Costs and Optimize ROI: Discover
UTILITY PERSPECTIVES FROM:
how you can plan refurbishments and upgrades to
maximise power output and increase revenues
Plant Reliability Assessment: Learn about the
latest plant equipment developments to help
maximise plant performance
Safety & Regulatory Update: Ensure adequate
safety margins and regulatory compliance and
understand why this is critical to your customers, OTHER EXPERTS FROM:
employees and shareholders
Resources & The Workforce: Understand the
demand for personnel across the industry and how
this may put a strain on your resources for O&M
MORE EASY WAYS TO REGISTER TODAY!
ONLINE: FAX:
www.nuclearenergyinsider.com/2011 +44 (0)207 375 7576
E-MAIL: CALL:
info@nuclearenergyinsider.com +44 (0)207 375 7575
For the latest speaker line up and agenda updates please visit:
www.nuclearenergyinsider.com/2011