Nishant Suryawanshi Aesa
•Download as DOCX, PDF•
0 likes•467 views
This document contains a resume for Nishant H Suryawanshi. It includes personal details like name, address, contact information, nationality, and languages known. It summarizes his professional experience which includes over 4 years of experience in the textile industry with erection, commissioning, and automation of waste collection systems and humidification plants. It also lists over 6 years of experience in maintenance at a spinning mill and over 4 years of experience as a customer support engineer for hardware and software. It also includes details of his educational qualifications and certifications. His current job and work experience at various textile mills and in IT are described in the document.
Report
Share
Report
Share
Recommended
Sajid Ali..C.V
Sajid Ali has over 5 years of experience in production supervision and site electrician roles. He holds a DAE in Electronics and a diploma in Computer Proficiency. Currently he works as a Senior Production Supervisor at BrukField Rice Pakistan, overseeing operations including machinery installation, quality control, and safety management. Prior to this he worked as a Production Supervisor at Matco Rice Processing and as a Site Electrician at Good Brand International.
Dipesh pawar CV
The document is a resume for Dipesh Dattaram Pawar seeking a position as a Mechanical Maintenance Engineer. It summarizes his professional experience including his current role as Maintenance Engineer at Siemens since 2015 and previous roles at Deepak Fertiliser and Petrochemical Corporation and Bhushan Steel. It also lists his qualifications including a Bachelor's degree in Mechanical Engineering and skills in areas like maintenance, operation, and repair of mechanical equipment.
Bhuvaneswar
This document contains a profile summary and work experience for an individual seeking a support engineer position. It summarizes the candidate's 6 years of experience in sales, service, and customer support. Specifically, it outlines roles as a customer support engineer, manager, and testing engineer. Educational qualifications include a Bachelor's degree in Electrical and Electronics Engineering.
02. jrf 2015 interview call letter
Manu Mitra has been shortlisted for the written test and interview for the JRF program in Computer Science and Engineering at the Indian Institute of Technology Indore on October 3, 2015. The written test and interview will take place in Computer Lab PF-02 at the Pithampur Auto Cluster Limited Campus of IIT Indore at 9:00 am. Candidates should bring original certificates, two passport photos, and attested photocopies of all documents to the interview. No travel or daily allowance will be provided for attending the interview.
Resume Update
Pradeep Saraswat is a service engineer based in Agra, India with over 20 years of experience. He has worked for several companies servicing and maintaining telecom equipment like STD/PCO billing machines and scanners. His responsibilities have included installation, troubleshooting, customer support, stock maintenance and providing feedback reports. Pradeep holds a diploma in Industrial Electronics and qualifications in Computer Fundamentals. He aims to utilize his skills and experience in a professional growth opportunity.
yara (1)
Yogesh Kumar Arora is an Assistant Manager (Maintenance) with 14 years of experience in instrumentation and electrical maintenance. He holds a Diploma in Instrumentation Technology and has worked in maintenance roles for food processing companies in Punjab, India. He is seeking a suitable position that requires his expertise in instrumentation, electrical projects, and maintenance.
cv1
Ahmad Ashraf is seeking a career opportunity to utilize his B-Tech in Mechanical Engineering and skills. He has experience in maintenance engineering roles at power plants and industrial facilities. His academic qualifications include a B-Tech in Mechanical Engineering from 2014 and secondary school certificate from 2008.
Kalpesh Morkar
Kalpesh Morkar is seeking a position that allows him to gain knowledge and experience working in a team environment. He has over 12 years of experience as a fitter, machine operator, and quality inspector for textile and wind turbine blade manufacturing companies. He has expertise in materials inspection, measurement instruments, mould installation, and communicating inspection reports. Morkar holds an SSC, ITI certification, HSC, and mechanical engineering diploma and is proficient in Microsoft Office, Windows operating systems, and Tally accounting software.
Recommended
Sajid Ali..C.V
Sajid Ali has over 5 years of experience in production supervision and site electrician roles. He holds a DAE in Electronics and a diploma in Computer Proficiency. Currently he works as a Senior Production Supervisor at BrukField Rice Pakistan, overseeing operations including machinery installation, quality control, and safety management. Prior to this he worked as a Production Supervisor at Matco Rice Processing and as a Site Electrician at Good Brand International.
Dipesh pawar CV
The document is a resume for Dipesh Dattaram Pawar seeking a position as a Mechanical Maintenance Engineer. It summarizes his professional experience including his current role as Maintenance Engineer at Siemens since 2015 and previous roles at Deepak Fertiliser and Petrochemical Corporation and Bhushan Steel. It also lists his qualifications including a Bachelor's degree in Mechanical Engineering and skills in areas like maintenance, operation, and repair of mechanical equipment.
Bhuvaneswar
This document contains a profile summary and work experience for an individual seeking a support engineer position. It summarizes the candidate's 6 years of experience in sales, service, and customer support. Specifically, it outlines roles as a customer support engineer, manager, and testing engineer. Educational qualifications include a Bachelor's degree in Electrical and Electronics Engineering.
02. jrf 2015 interview call letter
Manu Mitra has been shortlisted for the written test and interview for the JRF program in Computer Science and Engineering at the Indian Institute of Technology Indore on October 3, 2015. The written test and interview will take place in Computer Lab PF-02 at the Pithampur Auto Cluster Limited Campus of IIT Indore at 9:00 am. Candidates should bring original certificates, two passport photos, and attested photocopies of all documents to the interview. No travel or daily allowance will be provided for attending the interview.
Resume Update
Pradeep Saraswat is a service engineer based in Agra, India with over 20 years of experience. He has worked for several companies servicing and maintaining telecom equipment like STD/PCO billing machines and scanners. His responsibilities have included installation, troubleshooting, customer support, stock maintenance and providing feedback reports. Pradeep holds a diploma in Industrial Electronics and qualifications in Computer Fundamentals. He aims to utilize his skills and experience in a professional growth opportunity.
yara (1)
Yogesh Kumar Arora is an Assistant Manager (Maintenance) with 14 years of experience in instrumentation and electrical maintenance. He holds a Diploma in Instrumentation Technology and has worked in maintenance roles for food processing companies in Punjab, India. He is seeking a suitable position that requires his expertise in instrumentation, electrical projects, and maintenance.
cv1
Ahmad Ashraf is seeking a career opportunity to utilize his B-Tech in Mechanical Engineering and skills. He has experience in maintenance engineering roles at power plants and industrial facilities. His academic qualifications include a B-Tech in Mechanical Engineering from 2014 and secondary school certificate from 2008.
Kalpesh Morkar
Kalpesh Morkar is seeking a position that allows him to gain knowledge and experience working in a team environment. He has over 12 years of experience as a fitter, machine operator, and quality inspector for textile and wind turbine blade manufacturing companies. He has expertise in materials inspection, measurement instruments, mould installation, and communicating inspection reports. Morkar holds an SSC, ITI certification, HSC, and mechanical engineering diploma and is proficient in Microsoft Office, Windows operating systems, and Tally accounting software.
ATEI PII SBIR Proj Description 5 Feb 2013
This document describes a DARPA project to develop highly integrated silicon-based RF electronics to achieve unprecedented levels of integration for RF, microwave, and mm-wave modules using silicon CMOS technology. The project aims to develop Ka-band transmit/receive integrated circuits less than 7 mm^2 comprising a transceiver module for applications like MIMO radar, electronic warfare systems, and sensing systems. Critical circuit blocks were demonstrated at a technology readiness level of 4-5 and the silicon process used has a manufacturing readiness level of 9. The integrated circuits could transform the design of systems like AESA radars by reducing costs, size, weight and power compared to existing discrete component approaches.
Policy Briefing 2 2 09
The document summarizes U.S. arms transfers to Israel from 2001-2008 under the Bush Administration. It reports that the U.S. provided over $31 billion in weapons to Israel during this period through programs like Foreign Military Sales, Direct Commercial Sales, and Excess Defense Articles. It also notes that these U.S. weapons were used by Israel in military operations that killed over 1,300 Palestinians, including many civilians, during Operation Cast Lead in 2008-2009. The document concludes by calling for policy changes to condition future U.S. military aid and ensure weapons are only used for legitimate self-defense.
Msg Overview Aug08
ATK provides mission critical solutions from 22 locations across 18 states. It aims to be the partner of choice by delivering affordable and effective solutions on time through a focus on people, integrity, commitment and excellence. It offers next generation weapons solutions through divisions in advanced weapons, tactical propulsion & controls, integrated systems and aerospace structures.
Daniel Mauriño, Adviser of the Spanish National Aviation Safety Agency (AESA)
Daniel Mauriño, Adviser of the Spanish National Aviation Safety Agency (AESA)Colegio Oficial de Pilotos de la Aviación Comercial
El énfasis en los emprendimientos respecto a la protección de las fuentes de información sobre seguridad operacional se deposita en el porqué, en las razones por las cuales tal protección es considerada necesaria. Un énfasis escaso, si alguno, se deposita en cómo cristalizar la eventual protección, y qué nivel de protección puede o debe ser brindada a distintas fuentes de información sobre seguridad operacional.
Esta ponencia presenta una perspectiva sobre como encaminar estos dos interrogantes. El punto de partida es la caracterización de los sistemas de gestión de seguridad operacional del Estado (SSP) y de los proveedores de servicios (SMS) como los “clientes” primordiales de la protección de las fuentes de seguridad operacional. La ponencia hace luego un brevísimo recuento histórico del desarrollo de la iniciativa de OACI sobre el particular, para proporcionar el marco de referencia para la propuesta de cómo y qué proteger.
A plane that everybody calls ‘legend’ son
The document provides details about the F-4 Phantom aircraft, including:
1) The F-4 Phantom first test flight occurred in 1957 after its engines were installed in 1956.
2) It held several airspeed records in 1959-1960 and had a maximum speed of Mach 2.23.
3) Turkey received over 200 F-4 Phantoms between 1974-2003, upgrading some to the 2020 Terminator standard in the late 1990s and early 2000s.
4) Presently, Turkey operates F-4E and RF-4E Phantoms from several air bases, with around 50 F-4E Terminators remaining in service.
F 35 brief
This is a brief about F-35 strike aircraft. Lockheed Martin had stated many things about it, but not many are correct. For details, see inside.
Introduction to Hybrid Rockets
Hybrid rockets use a liquid oxidizer and solid fuel. They are mechanically simpler than other rocket types and can provide denser fuels. A hybrid rocket consists of a pressure vessel containing liquid oxygen and a combustion chamber housing solid fuel. When thrust is desired, the liquid oxidizer flows into the combustion chamber where it reacts with the solid fuel surface in a boundary layer flame. Hybrid rockets offer higher safety during fabrication and operation compared to solid rockets, and allow for throttling capability not available with other rocket types. While hybrid rockets currently have some performance disadvantages, their safety features make them promising for future propulsion applications.
F 15 e strike eagle, usa - dual role long range fighter aircraft
The F-15E Strike Eagle is a multirole fighter based on the F-15 Eagle that can perform both air-to-air and air-to-ground missions. It has been operated by the US Air Force since the 1990s and is also used by the militaries of Israel, Japan, Saudi Arabia, South Korea, and Singapore. With powerful engines and a large weapons payload, the F-15E provides long-range strike capability and is considered a superior next generation fighter.
Ivio armi dall'italia al mondo 2000 2012
This document provides a summary of major conventional weapons transfers by Italy between 2000-2012. It lists the recipient country, weapon/system, number ordered/delivered, year of order/delivery, and sometimes value of the deal or production details. Many transfers were of naval guns, helicopters, missiles, radars, and other equipment to countries in Europe, South America, Africa and Asia for military and civilian uses like border security. The full document contains much more detailed information.
AESA Share
These slides are associated with Jonathan's presentation at the San Antonio AESA Conference - the focus was Digital Age Teacher Evaluation Systems
Eahc tendering plan 2011 reparto porcentual sept2011
This document outlines the financing and shares in a tendering process for various BTSF programs. It lists 11 subject areas with amounts of contracts totaling 9.85 million Euros. For each subject, it identifies a leader organization and proposes shares of the contract for 13 participating organizations, with shares totaling 100% of the contract amount for each subject. The overall shares of the total contracts for each organization are listed at the bottom, with AETS receiving the largest share at 40% and AESA receiving the second largest at 24%.
Blended Learning in Action (AESA 2011)
This document provides an overview of a presentation on blended learning given by Colleen Worrell and Susan Rees. The presentation introduced blended learning and discussed Project ABLE, a blended learning initiative involving 10 school districts. Project ABLE emphasized developing student-centered, universally designed curriculum units incorporating online learning, open educational resources, and project-based learning to engage students and develop 21st century skills. Teachers participated in a blended professional development program to learn course development and facilitation skills. The presentation provided examples of blended learning models and their outcomes in different school districts.
Virtuagym
Paul Braam is the Co-Founder and CEO of Virtuagym, a social fitness platform launched in 2008 that reached 1 million users in 2012 and now has over 5 million users. Virtuagym aims to motivate users through social connections, coaching, gamification, and mobile apps by providing opportunities for improved efficiency, cost savings, service levels, retention, marketing and growth as demonstrated through corporate health, mental healthcare, and government customers.
6. detente
Détente was a period in the 1960s-1970s marked by efforts to reduce tensions between the US and USSR through arms control agreements like SALT I and cooperation in space. However, arms continued to increase on both sides after SALT I. Cooperation grew in areas like Antarctica research and space stations, but arms talks proved limited in curbing weapons buildups. Overall, détente had mixed success in improving relations versus controlling arms.
Military Radar
Military Radar 2011 offers the most comprehensive and influential speaker panel yet in the ninth annual occurrence of this unique series. This year’s conference will go further than ever before to help you to achieve effective radar systems on air, sea and land, by interacting with the world’s foremost military and industry radar experts.
In the past year radar technology has continued to evolve rapidly. The next generation of radar technology such as AESA, multi-static, through-wall and dual band radar systems are now an operational reality driving new platform and retrofit development. In addition the demand for radar technology allowing 360 degree real time battlespace awareness has continued to increase driving research, development and procurement in the military radar sector.
Download the brochure now for further details
Microwave Coupler
Microwave couplers are passive devices that divide and distribute power between transmission lines. There are different types of couplers including directional couplers, hybrid couplers, and Lange couplers. Key specifications for couplers include coupling factor, isolation factor, directivity, and losses. Recent developments aim to reduce size and increase bandwidth, such as using novel phase inverter designs in hybrid couplers.
Jet engine senatorlibya
The document summarizes the key components and working principles of jet engines. It describes the basic components as the inlet, compressor, combustor, turbine, and nozzle. It explains that air is compressed, mixed with fuel and burned, passing through a turbine to drive the compressor before being expelled through a nozzle for thrust. It also categorizes different types of jet engines such as turbojets, turbofans, rockets, ramjets, and others.
Saab Gripen Update Farnborough July 15
Gripen update presentation from Executive Vice President and Deputy CEO. Watch on demand here:
http://wms.magneetto.com/saab/2014_0714_webcast2/view
(Also available on-demand afterwards).
For more information on Saab's Schedule of events and media at the show please visit: http://saabgroup.com/en/About-Saab/Meet_Saab/2014/Farnborough2014/
Microwave- directional coupler paramets & applications
A directional coupler is a passive device that couples part of the transmission power from one transmission line to another. It has four ports: input, transmitted, coupled, and isolated. Key parameters are coupling factor, loss, isolation, and directivity. Directional couplers are commonly used to monitor power and frequency without interrupting the main signal, for frequency and power measurements, and combining signals to a receiver when isolation is high.
Jeff Krongaard - RAYTHEON
Raytheon's supplier diversity program aims to increase sourcing from small, minority-owned, and women-owned businesses. The program is designed to ensure compliance with public laws and regulations regarding utilization of diverse suppliers. Raytheon leadership oversees supplier diversity initiatives and outreach events are held to develop relationships with potential diverse suppliers. The ultimate goals are to support customers and small business growth while obtaining competitive solutions.
cv
This document contains the resume of M. Mohamed Faizan. It includes his personal details like name, date of birth, address, languages known, qualifications and career objective. Faizan has a diploma in Electronics and Communication Engineering and has over 6 years of work experience in roles like System Administrator, Industrial Engineer, Customer Care Engineer and Telecom Engineer at various companies. His skills include hardware, networking, production, inventory management and problem solving. He is self-driven, a team player and committed to deadlines.
karthik New
M. Karthik is seeking a production role with an automotive organization. He has over 10 years of experience in automotive, electrical components, and battery industries. Currently he is an Assistant Manager of Maintenance at Exide Industries, leading production and maintenance of pasting and expander shops. He aims to increase efficiency and productivity through process improvement, problem solving, and team leadership.
More Related Content
Viewers also liked
ATEI PII SBIR Proj Description 5 Feb 2013
This document describes a DARPA project to develop highly integrated silicon-based RF electronics to achieve unprecedented levels of integration for RF, microwave, and mm-wave modules using silicon CMOS technology. The project aims to develop Ka-band transmit/receive integrated circuits less than 7 mm^2 comprising a transceiver module for applications like MIMO radar, electronic warfare systems, and sensing systems. Critical circuit blocks were demonstrated at a technology readiness level of 4-5 and the silicon process used has a manufacturing readiness level of 9. The integrated circuits could transform the design of systems like AESA radars by reducing costs, size, weight and power compared to existing discrete component approaches.
Policy Briefing 2 2 09
The document summarizes U.S. arms transfers to Israel from 2001-2008 under the Bush Administration. It reports that the U.S. provided over $31 billion in weapons to Israel during this period through programs like Foreign Military Sales, Direct Commercial Sales, and Excess Defense Articles. It also notes that these U.S. weapons were used by Israel in military operations that killed over 1,300 Palestinians, including many civilians, during Operation Cast Lead in 2008-2009. The document concludes by calling for policy changes to condition future U.S. military aid and ensure weapons are only used for legitimate self-defense.
Msg Overview Aug08
ATK provides mission critical solutions from 22 locations across 18 states. It aims to be the partner of choice by delivering affordable and effective solutions on time through a focus on people, integrity, commitment and excellence. It offers next generation weapons solutions through divisions in advanced weapons, tactical propulsion & controls, integrated systems and aerospace structures.
Daniel Mauriño, Adviser of the Spanish National Aviation Safety Agency (AESA)
Daniel Mauriño, Adviser of the Spanish National Aviation Safety Agency (AESA)Colegio Oficial de Pilotos de la Aviación Comercial
El énfasis en los emprendimientos respecto a la protección de las fuentes de información sobre seguridad operacional se deposita en el porqué, en las razones por las cuales tal protección es considerada necesaria. Un énfasis escaso, si alguno, se deposita en cómo cristalizar la eventual protección, y qué nivel de protección puede o debe ser brindada a distintas fuentes de información sobre seguridad operacional.
Esta ponencia presenta una perspectiva sobre como encaminar estos dos interrogantes. El punto de partida es la caracterización de los sistemas de gestión de seguridad operacional del Estado (SSP) y de los proveedores de servicios (SMS) como los “clientes” primordiales de la protección de las fuentes de seguridad operacional. La ponencia hace luego un brevísimo recuento histórico del desarrollo de la iniciativa de OACI sobre el particular, para proporcionar el marco de referencia para la propuesta de cómo y qué proteger.
A plane that everybody calls ‘legend’ son
The document provides details about the F-4 Phantom aircraft, including:
1) The F-4 Phantom first test flight occurred in 1957 after its engines were installed in 1956.
2) It held several airspeed records in 1959-1960 and had a maximum speed of Mach 2.23.
3) Turkey received over 200 F-4 Phantoms between 1974-2003, upgrading some to the 2020 Terminator standard in the late 1990s and early 2000s.
4) Presently, Turkey operates F-4E and RF-4E Phantoms from several air bases, with around 50 F-4E Terminators remaining in service.
F 35 brief
This is a brief about F-35 strike aircraft. Lockheed Martin had stated many things about it, but not many are correct. For details, see inside.
Introduction to Hybrid Rockets
Hybrid rockets use a liquid oxidizer and solid fuel. They are mechanically simpler than other rocket types and can provide denser fuels. A hybrid rocket consists of a pressure vessel containing liquid oxygen and a combustion chamber housing solid fuel. When thrust is desired, the liquid oxidizer flows into the combustion chamber where it reacts with the solid fuel surface in a boundary layer flame. Hybrid rockets offer higher safety during fabrication and operation compared to solid rockets, and allow for throttling capability not available with other rocket types. While hybrid rockets currently have some performance disadvantages, their safety features make them promising for future propulsion applications.
F 15 e strike eagle, usa - dual role long range fighter aircraft
The F-15E Strike Eagle is a multirole fighter based on the F-15 Eagle that can perform both air-to-air and air-to-ground missions. It has been operated by the US Air Force since the 1990s and is also used by the militaries of Israel, Japan, Saudi Arabia, South Korea, and Singapore. With powerful engines and a large weapons payload, the F-15E provides long-range strike capability and is considered a superior next generation fighter.
Ivio armi dall'italia al mondo 2000 2012
This document provides a summary of major conventional weapons transfers by Italy between 2000-2012. It lists the recipient country, weapon/system, number ordered/delivered, year of order/delivery, and sometimes value of the deal or production details. Many transfers were of naval guns, helicopters, missiles, radars, and other equipment to countries in Europe, South America, Africa and Asia for military and civilian uses like border security. The full document contains much more detailed information.
AESA Share
These slides are associated with Jonathan's presentation at the San Antonio AESA Conference - the focus was Digital Age Teacher Evaluation Systems
Eahc tendering plan 2011 reparto porcentual sept2011
This document outlines the financing and shares in a tendering process for various BTSF programs. It lists 11 subject areas with amounts of contracts totaling 9.85 million Euros. For each subject, it identifies a leader organization and proposes shares of the contract for 13 participating organizations, with shares totaling 100% of the contract amount for each subject. The overall shares of the total contracts for each organization are listed at the bottom, with AETS receiving the largest share at 40% and AESA receiving the second largest at 24%.
Blended Learning in Action (AESA 2011)
This document provides an overview of a presentation on blended learning given by Colleen Worrell and Susan Rees. The presentation introduced blended learning and discussed Project ABLE, a blended learning initiative involving 10 school districts. Project ABLE emphasized developing student-centered, universally designed curriculum units incorporating online learning, open educational resources, and project-based learning to engage students and develop 21st century skills. Teachers participated in a blended professional development program to learn course development and facilitation skills. The presentation provided examples of blended learning models and their outcomes in different school districts.
Virtuagym
Paul Braam is the Co-Founder and CEO of Virtuagym, a social fitness platform launched in 2008 that reached 1 million users in 2012 and now has over 5 million users. Virtuagym aims to motivate users through social connections, coaching, gamification, and mobile apps by providing opportunities for improved efficiency, cost savings, service levels, retention, marketing and growth as demonstrated through corporate health, mental healthcare, and government customers.
6. detente
Détente was a period in the 1960s-1970s marked by efforts to reduce tensions between the US and USSR through arms control agreements like SALT I and cooperation in space. However, arms continued to increase on both sides after SALT I. Cooperation grew in areas like Antarctica research and space stations, but arms talks proved limited in curbing weapons buildups. Overall, détente had mixed success in improving relations versus controlling arms.
Military Radar
Military Radar 2011 offers the most comprehensive and influential speaker panel yet in the ninth annual occurrence of this unique series. This year’s conference will go further than ever before to help you to achieve effective radar systems on air, sea and land, by interacting with the world’s foremost military and industry radar experts.
In the past year radar technology has continued to evolve rapidly. The next generation of radar technology such as AESA, multi-static, through-wall and dual band radar systems are now an operational reality driving new platform and retrofit development. In addition the demand for radar technology allowing 360 degree real time battlespace awareness has continued to increase driving research, development and procurement in the military radar sector.
Download the brochure now for further details
Microwave Coupler
Microwave couplers are passive devices that divide and distribute power between transmission lines. There are different types of couplers including directional couplers, hybrid couplers, and Lange couplers. Key specifications for couplers include coupling factor, isolation factor, directivity, and losses. Recent developments aim to reduce size and increase bandwidth, such as using novel phase inverter designs in hybrid couplers.
Jet engine senatorlibya
The document summarizes the key components and working principles of jet engines. It describes the basic components as the inlet, compressor, combustor, turbine, and nozzle. It explains that air is compressed, mixed with fuel and burned, passing through a turbine to drive the compressor before being expelled through a nozzle for thrust. It also categorizes different types of jet engines such as turbojets, turbofans, rockets, ramjets, and others.
Saab Gripen Update Farnborough July 15
Gripen update presentation from Executive Vice President and Deputy CEO. Watch on demand here:
http://wms.magneetto.com/saab/2014_0714_webcast2/view
(Also available on-demand afterwards).
For more information on Saab's Schedule of events and media at the show please visit: http://saabgroup.com/en/About-Saab/Meet_Saab/2014/Farnborough2014/
Microwave- directional coupler paramets & applications
A directional coupler is a passive device that couples part of the transmission power from one transmission line to another. It has four ports: input, transmitted, coupled, and isolated. Key parameters are coupling factor, loss, isolation, and directivity. Directional couplers are commonly used to monitor power and frequency without interrupting the main signal, for frequency and power measurements, and combining signals to a receiver when isolation is high.
Jeff Krongaard - RAYTHEON
Raytheon's supplier diversity program aims to increase sourcing from small, minority-owned, and women-owned businesses. The program is designed to ensure compliance with public laws and regulations regarding utilization of diverse suppliers. Raytheon leadership oversees supplier diversity initiatives and outreach events are held to develop relationships with potential diverse suppliers. The ultimate goals are to support customers and small business growth while obtaining competitive solutions.
Viewers also liked (20)
Daniel Mauriño, Adviser of the Spanish National Aviation Safety Agency (AESA)
Daniel Mauriño, Adviser of the Spanish National Aviation Safety Agency (AESA)
F 15 e strike eagle, usa - dual role long range fighter aircraft
F 15 e strike eagle, usa - dual role long range fighter aircraft
Eahc tendering plan 2011 reparto porcentual sept2011
Eahc tendering plan 2011 reparto porcentual sept2011
Microwave- directional coupler paramets & applications
Microwave- directional coupler paramets & applications
Similar to Nishant Suryawanshi Aesa
cv
This document contains the resume of M. Mohamed Faizan. It includes his personal details like name, date of birth, address, languages known, qualifications and career objective. Faizan has a diploma in Electronics and Communication Engineering and has over 6 years of work experience in roles like System Administrator, Industrial Engineer, Customer Care Engineer and Telecom Engineer at various companies. His skills include hardware, networking, production, inventory management and problem solving. He is self-driven, a team player and committed to deadlines.
karthik New
M. Karthik is seeking a production role with an automotive organization. He has over 10 years of experience in automotive, electrical components, and battery industries. Currently he is an Assistant Manager of Maintenance at Exide Industries, leading production and maintenance of pasting and expander shops. He aims to increase efficiency and productivity through process improvement, problem solving, and team leadership.
Suresh Resume with Pic
Suresh Babu is a mechanical engineer seeking a career that allows him to constantly update his knowledge and contribute to organizational goals. He has over 7 years of experience in various roles including process lead, troubleshooting engineer, process engineer, and service support engineer. His skills include production, process improvement, troubleshooting, maintenance, and quality control. Currently he works as a NPI Process Lead and Troubleshooting Engineer at Cal Comp Electronics Thailand, where he successfully completed projects, improved processes, and handled printer production lines.
Sub_Eng vipin gupta
Vipin Gupta is seeking a position that offers challenging work and opportunities for learning and growth. He has over 5 years of experience in customer support, networking, and systems administration. Currently he works as a service engineer for HCL Infosystems, where his responsibilities include logging calls, installing and configuring servers, managing user accounts, and restoring files. He is proficient with Windows, Linux, SAP, Exchange, and networking technologies like switches, routers, and fiber optics. He enjoys working in teams and is adept at troubleshooting technical issues.
CV- AMINUL
This document contains a resume for Md. Aminul Islam. It summarizes his objective of seeking an innovative work environment where knowledge can be shared and applied practically. It details his 5.6 years of experience in power plant operation and maintenance at BEXIMCO Limited and sales support at MAM Power Limited. It also provides his educational background including a B.Sc in electrical engineering from Khulna University of Engineering and Technology. Key skills include English and Bengali proficiency, AutoCAD, and Microsoft Office applications.
Resume-Vaibhav Umarkar
Vaibhav Umarkar is seeking a position that allows him to contribute positively to an organization's growth. He has over 6 years of experience working in operations and maintenance for RattanIndia Power Ltd. His responsibilities include project execution, management, commissioning, maintenance, and spare management. He has expertise in PLC programming, troubleshooting, and maintenance. He holds a Bachelor's degree in Instrumentation Engineering and has received appreciation for his work modifying PLC logic.
Resume
Raji K is a production manager with over 11 years of experience in electronics manufacturing. He has managed production lines and teams of up to 500 employees. Raji holds an EMBA and B.Tech in electrical engineering. He has extensive experience implementing quality systems and driving improvements in productivity, yield, and cost reduction. Raji is proficient in SMT equipment and processes and seeks new opportunities to apply his leadership and problem-solving skills.
D_Adhikari_Resume12
This document is a curriculum vitae for Dibyadarshi Adhikari that includes personal information, education history, skills, work experience, and a career objective. It details his graduate degree in textiles engineering, languages known, computer skills, hobbies, and over 10 years of work experience in textile production and quality management at various companies. The CV aims to showcase Dibyadarshi's qualifications and experience in the textiles field to support his career objective of contributing to organizational growth.
(632208982) lokesh_new_res
Lokesh G.K is seeking a challenging position that utilizes his 4.5 years of experience in technical and interpersonal skills. He has worked as a Manager of Technical Support at Spectro Analytical Labs and Deputy Manager of Technical and Commercial services at Bharat Test House, involving business development, quality assurance testing, calibration and inspection. He holds a B.E in electronics and communication engineering and has experience testing cables, electronics and appliances according to standards.
Sumit Resume.
Sumit Ghate is seeking a position in service and maintenance. He has over 7 years of experience as a service engineer for cutting machine and CNC machine manufacturers. Currently, he works for Lectra Technology as a service engineer where he installs and commissions cutting machines, provides customer support, and ensures issues are resolved at the root cause. Previously, he worked for DMGMORISEIKI and VISHAY COMPONENTS INDIA as a service and maintenance engineer where he supported machine installations, addressed breakdowns, and conducted preventative maintenance. He holds a B-Tech and diploma in electronics and has undergone training in quality management, production maintenance, and machine controller systems.
Resume
Nabin Kumar Choudhary has over 21 years of experience in polyester fiber production with Reliance Industries Ltd. He currently holds the position of Manager in the Polyester Staple Fiber and Conjugate Hollow Fiber Spinning & Draw Line department, overseeing four production lines. Previously he worked as Shift Engineer and Assistant Technical Officer. He has expertise in fiber manufacturing processes, quality control testing, machine maintenance, and achieving production targets. His academic qualifications include a B.Sc. in Mathematics.
Sr Position in Engineering
M. Suresh is seeking a senior position in manufacturing industries. He has over 14 years of experience in EMS and OEM manufacturing, currently working as a Maintenance Leader at Nokia India. He has expertise in machine maintenance, quality assurance, and project management. Notable achievements include receiving NOCOP and Nokia 7 awards for improving productivity and reducing costs.
NSK16-Resume
Narayan Sadashiv Kale is seeking an opportunity in technology to utilize his skills and experience. He has over 30 years of experience in IT support, hardware engineering, and technical instruction. His experience includes roles at Tree House Education, Nexus Computers, RBI, MSEB, Dataflow, E.C.I.L, and various technical institutes where he has maintained equipment, resolved issues, installed software, and conducted training courses. He has qualifications in computer hardware, networking, PC maintenance, television and radio servicing, and programming.
Resume
Nabin Kumar Choudhary has over 21 years of experience in polyester fiber production with Reliance Industries Ltd. He currently holds the position of Manager in the Polyester Staple Fiber and Conjugate Hollow Fiber Spinning & Draw Line department, overseeing four production lines. Previously he worked as Shift Engineer and Assistant Technical Officer. He has expertise in fiber manufacturing processes, quality control testing, machine maintenance, and achieving production targets. His skills include production planning, process optimization, and team leadership.
JUNIOR PRODUCTION ENGINEER
J. Samuel is applying for a position with your esteemed organization. He has 5 years of experience working in production at MAHLE BEHR India Ltd in Pune. He holds a diploma in electronics and communication engineering. Currently working as a junior engineer, his responsibilities include line handling, updating visualization boards, calculating OEE, and ensuring proper material movement and maintenance of production reports and 5S standards. He believes his communication skills, leadership ability, and passion for continuous self-development would allow him to face challenges and contribute to a new organization.
Resume_Suresh Limbachiya
Suresh A Limbachiya is seeking a job in a challenging work environment where he can utilize his skills and experience. He has over 10 years of experience as an Application Engineer and Senior Engineer working with Amtech Electronics and Suvik Electronics. His responsibilities included providing technical support to customers, installing and commissioning drives, studying industrial applications, and developing customized solutions. He has hands-on experience with different industries and has a Bachelor's Degree in Electronics and Communication Engineering.
Resume
Dileshwar Sahu is an Indian mechanical engineer seeking a challenging career in engineering. He has over 4 years of experience in construction, mining equipment management, and customer support. He is skilled in maintenance, troubleshooting, and improving equipment availability. Currently he works as a service engineer providing technical support for underground mining machines.
CV- Albert Aivan Laguador - (Mechanical Engineer- Equipment,Maintenance)
Albert Aivan B. Laguador is applying for an Engineer - Mechanical / Equipment (Process) position. He has over 5 years of experience as a mechanical engineer in manufacturing and plant industries. He received a Bachelor's Degree in Mechanical Engineering in 2009. His skills include AutoCAD drafting, pneumatic/electronic machines expertise, maintenance management, and proficiency in MS Office. He is currently seeking immediate employment with an expected salary of S-Pass. His previous work experiences include positions as a Senior Mechanical Engineer and Process Engineer.
R_117624513
Chandra Sekar has over 6 years of experience in RF testing and mobile device manufacturing. He has worked as a test technician at Nokia India Pvt Ltd, Flextronix India Pvt Ltd, and Nokia Solution and Network India Pvt Ltd. Sekar has expertise in GSM, GPRS, EDGE, WCDMA, and LTE testing and has experience setting up and maintaining mobile device production lines. He is seeking a new position where he can continue developing his skills and contributing to an organization's growth.
prashant resume
Prashant Kumar Lawania is seeking opportunities in operations and maintenance, preferably in telecom, electronics, sugar, power, instrumentation or control. He has a B.Tech in electronics and communication and over 5 years of experience working in instrumentation and control in the sugar industry. He has extensive knowledge of DCS systems like Honeywell Experion PKS and skills in programming languages like C, HTML, and software like Xilinx, P-Spice, and Altium Designer. He also has experience with industrial training at Hindustan Aeronautics Limited.
Similar to Nishant Suryawanshi Aesa (20)
CV- Albert Aivan Laguador - (Mechanical Engineer- Equipment,Maintenance)
CV- Albert Aivan Laguador - (Mechanical Engineer- Equipment,Maintenance)
Nishant Suryawanshi Aesa
- 1. Nishant H Suryawanshi A/P Datta Colony, Tal: Ajara, Dist: Kolhapur Ajara. 416505 Mobile : +91 87500 66512 E-mail : nishantsurya@gmail.com Nationality : Indian Sex : Male Date of birth : 19 October 1976 Passport No. : G1636480 Marital Status : Married Languages known : English, Hindi, Marathi, Gujarati, Konkani. SUMMARYOF EXPERIENCE Around 4 yr. of experience in Textile- Erection, Commissioning & Automation of Waste Collection Systems & Humidification Plants. Around 6 yrs.of experience in Maintenance in 100% EOU Spinning Mill. Around 4 yrs.of experience asCustomer Support Engineer forHardware & Software. EDUCATIONAL QUALIFICATIONS: Academics: Diploma in Textile Manufacturing – Maharashtra (DTM) with 67.76% in the year 1998. Higher Secondary Certificate Examination (HSC) – Maharashtra with 54.67% in the year 1994. Secondary School Certificate Examination (SSC) – Maharashtra with 68.89% in the year 1992 Diploma: Diploma course of Hardware Engineering from IIHT Baroda – Gujarat Certified Exam: Brainbench Certified WIN’98 Administrator. Present Job: AESA Air Engineering Pvt. Ltd. Delhi INDIA. Currently working in AESA Air Engineering Pvt. Ltd. As Sales Engineer for North India. Previously worked as Sr. Service & Control Engineer, Successfully installed & commissioned Waste Collection Systems for Blow room & Carding, Noil Collection in Comber & Humidification Plant for Blow room & Carding, Preparatory, Spinning & Linkconer Department in Vardhman Spinning Mills Ltd., Baddi (H.P), Vardhman Polytex Ltd., Nalagarh (H.P.). AC Plant for Spinning unit for Indo Thai Synthetics Ltd., Thailand.
- 2. Mill Work Experience: ● Ajara Taluka Shet. Saha. Soot Girani Ltd. Ajara ( Maintenance Manager ) ● Worked as Maintenance In-Charge for Blow-Room, Carding, Preparatory, Ring Frame & Winding Department from Feb. 2008 to May 2011 ● Looking after all LMW plant & Muratec 21C winding unit. Computer Administrative experience is plus point in the job. ● PBM Polytex Limited (MP) (An ISO 9002 Certified, 100% EOU, a sister concern unit of Eurotex, Known as BLP Super Spinner) ● Having 2 years of experience as a Maintenance Supervisor in Spinning Preparatory unit. Maintaining Blow room line, carding unit & combing unit as per the standards of ISO & maintaining documents for same. ● Handling alone all outside activities of end milling of card flats, Grinding & replacement of combs. ● Designed proper ducting lines for flow of cotton from Blow Room to Carding. ● Given training to workers regarding quality policy & housekeeping. IT Work Experience: 1. PCS Technology Ltd. Duration : Oct 2004 to Jan 2008 • Supporting Intel Networking devices, LAN and PCS, HP, IBM, Dell, HCL Server/PC Hardware and printers. • Supporting Customers for SAP. (Whirlpool India, Tata Motors, IngramMicro) 2. Softtouch Computer Care. Duration : Oct 2002 to Sept 2004 • Worked as a Senior Hardware/Branch manager 3 years. Most of the jobs include Installation, support of Windows NT 4.0 Server, Novell Netware 4.xx, Windows NT Workstation 4.0, Windows 2000/98/95, Network Hardware implementation, LAN Installation and support, Administrative Work on windows NT OS, Printers(Passbook, Laserjet, DMP and Line). Also worked on UPS (500 VA to 5KVA- TVSE)