Cut resistant garments for workers in hazardous industrial environments require specially engineered fabrics that provide protection from cuts, punctures, and abrasions without compromising comfort or appearance. NorFab's new CUTPROTM Vintage fabric line uses Twaron® Premium yarn and stainless steel wires to stop cuts from sharp objects while maintaining the look of vintage workwear. The unique composition provides ANSI level 4 cut protection, level 3 puncture resistance, and level 2 abrasion resistance.

1. Fabrics for industrial cut protective garments
CUTPRO TM  
Vintage Cut resistant garments for workers
in high mechanical risk areas require
Cut resistant garments for workers in high specially engineered fabrics designed to
mechanical risk areas require specially protect without compromising comfort
engineered fabrics designed to protect and appearance.
without compromising comfort and
appearance. NorFab’s new CUTPRO™
Vintage line of woven fabrics with Twaron®
Premium yarn provides high levels of
cut and puncture resistance with an
appearance reminiscent of vintage
workwear. CUTPRO™ Vintage combines
the strength, high thermal capability, cut
resistance, and durability of Teijin Twaron®
with the hardness of stainless steel. The
unique composition of CUTPRO™ Vintage
provides outstanding protection against
hazards posed by sharp objects and
revolving or reciprocating blades.
Garments made with CUTPROTM
Vintage fabrics provide:
• ANSI/ISEA 105-2011
- Level 4 Cut Protection
- Level 3 Puncture Protection
- Level 2 Abrasion Resistance
• 100% inherent flame resistance that
will never wash out or wear out
• Unique visual appearance
Sheet-metal handling • Glass handling • Automotive assembly

2. Fabrics for industrial cut protective garments
CUTPRO TM
Vintage Specifications
Fabric Style 10TT366
Fiber Blend Twaron®/Stainless Steel Wire
Color Yellow with stripe
Weave Twill
Weight oz./yd.² 9.5 +/- 7%
Fabric Thickness, inches 0.026 +/- .005
Tensile Strength 500 x 400
ASTM D5034 (Grab) (W&F) lbs.
Cut Performance Test 3129
ASTM 1790-05, CPPT (g.)
Cut Resistance Level 4
ANSI/ISEA 105-2011
Puncture Resistance Test 83
EN388 (N.)
Puncture Resistance Level 3
ANSI/ISEA 105-2011
Abrasion Resistance Test 600 Cycles
ASTM D3884-09 (Taber; H18 wheel; 500 g. wt.)
Abrasion Resistance Level 2
ANSI/ISEA 105-2011
All data intended as general information and no warranties, guarantees, or claims of fitness for use are expressed or implied by NOR*FAB Corp.
09/11
1310 Stanbridge Street,
Box 830, Norristown, PA 19404-0830 U.S.A.
Tel: 610-275-7270 • 800-441-9680 • Fax: 610-277-6106
Email: sales@norfab.com • www.norfab.com
Sheet-metal handling • Glass handling • Automotive assembly