Special Features
Super sound insulation
PUR extra clean
Increased underfoot comfort
No wax no polish
3 printed all over design in a wide range of shades
Pure PVC transparent wear layer
VOC compliant
We provide safety flooring for transportation like bus flooring and many others. Responsive Industries gives many designs, great range of flooring many colours and easy to buy all over world.
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
Thermobreak is a new open cell polyolefin foam duct liner called AcoustiPlus. It provides excellent acoustic absorption even at low thicknesses, meets various fire safety standards, and is anti-microbial. It has additional benefits such as being fiber-free, PVC-free, lightweight, durable, and resistant to erosion. It is available in rolls and sheets in thicknesses of 15mm and 24mm.
A Technical Data Sheet covering our architectural anti slip stair tread nosings showing dimensions available and options such as glow strips for wayfinding.
A thin ETFE film, F-CLEAN® Greenhouse Film is the preferred covering material for horticultural greenhouses as it lets in more light than glass, PE film, polycarbonate and PMMA sheets. By allowing maximum UV light transmission, F-CLEAN ensures earlier harvest of better quality fruit and vegetables and more colorful flowers. More on F-CLEAN here: http://ow.ly/mUJHS.
Tuff Trac® ESD matting with Lo-CHARTM chemistry provides critical safety aboard naval vessels and in monitored work environments by meeting stringent fire and smoke standards. It has a dual layer design that bonds an anti-static layer to a conductive polymer layer, providing continuous electrostatic discharge protection without depending on humidity. In laboratory flame tests, Tuff Trac® with Lo-CHARTM was the only matting to meet the four minute standard before being fully engulfed in flames, while some rubber products ignited in less than 60 seconds.
This document provides information on various gasket materials produced by Donit Tesnit including Grafilit, Doniflon, Micalit, and Doniflex. Grafilit is an expanded natural graphite material with excellent chemical and thermal resistance. It is available in different compositions for varying operating pressures and temperatures. Doniflon is an expanded PTFE material suitable for most media across a wide pH range. Micalit contains mica flakes and resin for high thermal and chemical resistance. Doniflex materials have aramid fibers, graphite, and binders for good chemical and mechanical properties at elevated temperatures. Each material is designed for specific industries and has distinct properties, composition, and technical data.
We provide safety flooring for transportation like bus flooring and many others. Responsive Industries gives many designs, great range of flooring many colours and easy to buy all over world.
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
Thermobreak is a new open cell polyolefin foam duct liner called AcoustiPlus. It provides excellent acoustic absorption even at low thicknesses, meets various fire safety standards, and is anti-microbial. It has additional benefits such as being fiber-free, PVC-free, lightweight, durable, and resistant to erosion. It is available in rolls and sheets in thicknesses of 15mm and 24mm.
A Technical Data Sheet covering our architectural anti slip stair tread nosings showing dimensions available and options such as glow strips for wayfinding.
A thin ETFE film, F-CLEAN® Greenhouse Film is the preferred covering material for horticultural greenhouses as it lets in more light than glass, PE film, polycarbonate and PMMA sheets. By allowing maximum UV light transmission, F-CLEAN ensures earlier harvest of better quality fruit and vegetables and more colorful flowers. More on F-CLEAN here: http://ow.ly/mUJHS.
Tuff Trac® ESD matting with Lo-CHARTM chemistry provides critical safety aboard naval vessels and in monitored work environments by meeting stringent fire and smoke standards. It has a dual layer design that bonds an anti-static layer to a conductive polymer layer, providing continuous electrostatic discharge protection without depending on humidity. In laboratory flame tests, Tuff Trac® with Lo-CHARTM was the only matting to meet the four minute standard before being fully engulfed in flames, while some rubber products ignited in less than 60 seconds.
This document provides information on various gasket materials produced by Donit Tesnit including Grafilit, Doniflon, Micalit, and Doniflex. Grafilit is an expanded natural graphite material with excellent chemical and thermal resistance. It is available in different compositions for varying operating pressures and temperatures. Doniflon is an expanded PTFE material suitable for most media across a wide pH range. Micalit contains mica flakes and resin for high thermal and chemical resistance. Doniflex materials have aramid fibers, graphite, and binders for good chemical and mechanical properties at elevated temperatures. Each material is designed for specific industries and has distinct properties, composition, and technical data.
- Carlisle manufactures reinforced EPDM roof membranes in thicknesses of 45, 60, and 75 mils. The membranes are internally reinforced with polyester scrim to provide puncture and tear resistance.
- Key benefits of Carlisle's Sure-Tough reinforced EPDM membranes include excellent weathering resistance, seamless sheets that are UL classified, and industry-leading warranties of up to 30 years.
- Carlisle's Factory-Applied Tape seam technology results in reliable seams with greater strength through a quality-controlled application process in the factory.
This document describes a preformed closed cell physically crosslinked polyolefin foam tube insulation with reinforced foil facing for steel and copper pipes. It provides premium performance pipe insulation with lower installation costs and maximum energy savings. The product is a completely closed cell, physically crosslinked foam pipe insulation with heat bonded factory applied reinforced aluminium foil facing that is pre-slit for faster installation. It has excellent insulating properties, compression resistance, and vapour diffusion resistance.
3M Brand PST Cold Shrink Connector Insulators are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The insulators are made of EPDM rubber and are installed by removing the core, allowing the tube to shrink and form a waterproof seal around the cable or connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
This document provides a summary of 3M's 8440 Series silicone rubber cold shrink connector insulators. It describes the product as open-ended, tubular sleeves that are factory expanded and shrink to form a tight seal when installed. The document lists the product's key features such as being simple to install without tools or heat, resisting moisture and chemicals, and having an operating temperature range of -55°C to 260°C. It also provides application examples, specifications, test data on performance properties, and ordering information.
F-CLEAN is AGC's brand of ETFE film used for greenhouse coverings. It has excellent weather resistance, chemical resistance, heat resistance from -100C to 180C, is nonflammable, and has anti-stick properties. F-CLEAN films are produced using Fluon ETFE resin in a process involving polymerization and extrusion. The films have long service lives of over 30 years and provide benefits for greenhouse crops like easy cleaning, fire safety, improved light transmission, and enhanced crop quality. F-CLEAN films come in various options like clear, light-diffusing, UV blocking, and are used widely in greenhouse agriculture around the world.
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
This document is a selector guide for conductive compounds from Chomerics including conductive coatings, adhesives, and sealants/gap fillers. It provides information on various product lines including product filler material, resin type, specifications, cure schedules, and typical applications. The guide contains specifications for over 30 different conductive compound products.
Sikafloor-20 PurCem is a three-part, polyurethane modified cement screed suitable for floors subject to heavy loading, abrasion, and chemical exposure. It is typically installed at 6-9mm thick and has a textured surface providing slip resistance. It offers high mechanical strength, abrasion and chemical resistance, is easy to apply, and allows fast return to service. The product data sheet provides information on its composition, uses, characteristics, test results, application details, and recommended systems for substrate preparation and installation.
DuraForm FR 100 Plastic - SLS Systems - Material properties (EN)Quoc Tuan Duong, ing.
In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today’s human environmental safety for many other consumer applications. For electrical appliances, aerospace and aircraft cabin, compartment & cargo applications, etc.
Technical Data Sheet for Adverstep stairway advertising non slip stair treads. Includes dimensions, materials, installation and maintenance information.
UV-curable polyurethane dispersions (UV-PUDs) have become a well established and commercially successful class of products because of their combination of low environmental impact, range of achievable properties and ease of use. This presentation provides an overview of Sartomer's UV-PUDs, including end applications, liquid properties, processing and curing conditions, performance rankings and other features. For more information, go to www.sartomer.com and follow Sartomer on Twitter @SartomerGlobal.
New Nor Fab Cut Pro Natural Tech Data ProofDavid Ducos
The document describes fabrics made by NorFab called CUTPRO Natural that are designed for cut protection in industrial work environments. The fabrics combine Kevlar with stainless steel and fiberglass to provide strength, thermal capability, cut resistance, durability, and protection against sharp objects. Garments made from CUTPRO Natural fabrics can provide up to level 4 cut protection, level 5 puncture resistance, and level 3 abrasion resistance. The fabrics have inherent flame resistance and the appearance of natural Kevlar to mask the presence of stainless steel and fiberglass yarns.
The document discusses Masterduct's engineered solutions for abrasive, high-heat, chemical, and vehicle exhaust applications. It provides details on their abrasion resistant, high temperature, and chemical resistant hose products. It also discusses their solutions for applications such as ventilation, exhaust, welding fumes, chemicals, high temperatures, and vehicle exhaust.
This document presents research on developing a new sound absorbing material made from styrene-butadiene rubber (SBR) and reclaimed rubber (RR). It describes how foam samples were produced with varying amounts of RR (0%, 20%, 40%) and tested for physicomechanical and acoustic absorption properties. The results showed that samples with higher RR content had greater tensile strength, elongation at break, cross-link density and density. Testing also found that samples with more RR achieved higher sound absorption coefficients across a wider frequency range, showing potential as a new acoustic absorber material.
The document discusses the results of a study on the effects of exercise on memory and thinking abilities in older adults. The study found that regular exercise can help reduce the decline in thinking abilities that often occurs with age. Older adults who exercised regularly performed better on cognitive tests and brain scans showed they had greater activity in important areas for memory and learning compared to less active peers.
This document summarizes the history and offerings of Soundtect, a company that manufactures acoustic panels from recycled plastic bottles. It discusses how Soundtect introduced their unique panels in 2010 and have since expanded their product lines to include 3D sculpted panels and flat panels, testing them for acoustic and fire performance. They take pride in their environmentally friendly approach using recycled materials. The document outlines their various panel designs and sizes, intended uses, and acoustic properties. It also mentions Soundtect's growth over the years, expansion of their team, and partnership with international distributors to meet rising global demand for their products.
This document provides information about acoustic panel false ceilings. It discusses the components of a false ceiling including acoustic panels made from glass fiber and a bio-based binder. The panels have a Class A fire rating and are installed by snapping metal channels together in a grid and dropping the lightweight acoustic panels into the grid. Benefits of acoustic ceilings include sound absorption, hiding pipes and wires, and increased light reflection. A market survey for different acoustic panel companies and their product specifications is also included.
This document provides information on various sound insulation materials, including their characteristics, pricing, sizes, and intended uses. Glass mineral wool is made from recycled glass, limestone and soda ash to form fine strands that are bound together. It has good tear strength and is lightweight with low environmental impact. Rock mineral wool is made from volcanic rock and recycled slag, and has high compressive strength. It can be used for thermal insulation and fire protection. Foamed plastics like extruded polystyrene are made through an extrusion process and have high compressive strength, water resistance and freeze-thaw performance. Products like Quiet Batt and Studio Pro are high-performance sound absorbing insulation materials used residentially and commercially.
Sound insulation of buildings(10 10-'15)Ankita Sikder
This document discusses sound insulation in buildings. It defines noise and describes how noise is transmitted through air, building structures, and structural members. It differentiates between sound insulation and sound absorption. Acceptable noise levels are outlined for different building types like hospitals, classrooms, and residences. Construction methods for sound insulation are described, including walls, floors, windows, doors, and machine mounting. Walls can be made of rigid, porous, or double materials. Floors can use resilient surfaces or floating constructions. Windows and doors work best when air tight. Proper placement of buildings and isolation of noise sources are also important for sound insulation.
Factors affecting acoustic of building and their remediesDhrupal Patel
The document discusses various factors that affect acoustic quality in buildings, including reverberation time, loudness, focusing, echo, echelon effect, resonance, and noise. It provides explanations of each factor and potential remedies. Reverberation time can be optimized through the use of sound absorbing materials on walls, ceilings, floors, and furnishings. Loudness can be made more uniform through strategic placement of absorbers and use of reflecting surfaces. Curved surfaces should be avoided or covered to prevent focusing effects. Echoes and echelon effects are remedied by covering reflective surfaces. Resonance is addressed by ensuring tight fittings. Noise is categorized as airborne, structure-borne, or inside noise, each with corresponding
- Carlisle manufactures reinforced EPDM roof membranes in thicknesses of 45, 60, and 75 mils. The membranes are internally reinforced with polyester scrim to provide puncture and tear resistance.
- Key benefits of Carlisle's Sure-Tough reinforced EPDM membranes include excellent weathering resistance, seamless sheets that are UL classified, and industry-leading warranties of up to 30 years.
- Carlisle's Factory-Applied Tape seam technology results in reliable seams with greater strength through a quality-controlled application process in the factory.
This document describes a preformed closed cell physically crosslinked polyolefin foam tube insulation with reinforced foil facing for steel and copper pipes. It provides premium performance pipe insulation with lower installation costs and maximum energy savings. The product is a completely closed cell, physically crosslinked foam pipe insulation with heat bonded factory applied reinforced aluminium foil facing that is pre-slit for faster installation. It has excellent insulating properties, compression resistance, and vapour diffusion resistance.
3M Brand PST Cold Shrink Connector Insulators are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The insulators are made of EPDM rubber and are installed by removing the core, allowing the tube to shrink and form a waterproof seal around the cable or connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
This document provides a summary of 3M's 8440 Series silicone rubber cold shrink connector insulators. It describes the product as open-ended, tubular sleeves that are factory expanded and shrink to form a tight seal when installed. The document lists the product's key features such as being simple to install without tools or heat, resisting moisture and chemicals, and having an operating temperature range of -55°C to 260°C. It also provides application examples, specifications, test data on performance properties, and ordering information.
F-CLEAN is AGC's brand of ETFE film used for greenhouse coverings. It has excellent weather resistance, chemical resistance, heat resistance from -100C to 180C, is nonflammable, and has anti-stick properties. F-CLEAN films are produced using Fluon ETFE resin in a process involving polymerization and extrusion. The films have long service lives of over 30 years and provide benefits for greenhouse crops like easy cleaning, fire safety, improved light transmission, and enhanced crop quality. F-CLEAN films come in various options like clear, light-diffusing, UV blocking, and are used widely in greenhouse agriculture around the world.
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
This document is a selector guide for conductive compounds from Chomerics including conductive coatings, adhesives, and sealants/gap fillers. It provides information on various product lines including product filler material, resin type, specifications, cure schedules, and typical applications. The guide contains specifications for over 30 different conductive compound products.
Sikafloor-20 PurCem is a three-part, polyurethane modified cement screed suitable for floors subject to heavy loading, abrasion, and chemical exposure. It is typically installed at 6-9mm thick and has a textured surface providing slip resistance. It offers high mechanical strength, abrasion and chemical resistance, is easy to apply, and allows fast return to service. The product data sheet provides information on its composition, uses, characteristics, test results, application details, and recommended systems for substrate preparation and installation.
DuraForm FR 100 Plastic - SLS Systems - Material properties (EN)Quoc Tuan Duong, ing.
In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today’s human environmental safety for many other consumer applications. For electrical appliances, aerospace and aircraft cabin, compartment & cargo applications, etc.
Technical Data Sheet for Adverstep stairway advertising non slip stair treads. Includes dimensions, materials, installation and maintenance information.
UV-curable polyurethane dispersions (UV-PUDs) have become a well established and commercially successful class of products because of their combination of low environmental impact, range of achievable properties and ease of use. This presentation provides an overview of Sartomer's UV-PUDs, including end applications, liquid properties, processing and curing conditions, performance rankings and other features. For more information, go to www.sartomer.com and follow Sartomer on Twitter @SartomerGlobal.
New Nor Fab Cut Pro Natural Tech Data ProofDavid Ducos
The document describes fabrics made by NorFab called CUTPRO Natural that are designed for cut protection in industrial work environments. The fabrics combine Kevlar with stainless steel and fiberglass to provide strength, thermal capability, cut resistance, durability, and protection against sharp objects. Garments made from CUTPRO Natural fabrics can provide up to level 4 cut protection, level 5 puncture resistance, and level 3 abrasion resistance. The fabrics have inherent flame resistance and the appearance of natural Kevlar to mask the presence of stainless steel and fiberglass yarns.
The document discusses Masterduct's engineered solutions for abrasive, high-heat, chemical, and vehicle exhaust applications. It provides details on their abrasion resistant, high temperature, and chemical resistant hose products. It also discusses their solutions for applications such as ventilation, exhaust, welding fumes, chemicals, high temperatures, and vehicle exhaust.
This document presents research on developing a new sound absorbing material made from styrene-butadiene rubber (SBR) and reclaimed rubber (RR). It describes how foam samples were produced with varying amounts of RR (0%, 20%, 40%) and tested for physicomechanical and acoustic absorption properties. The results showed that samples with higher RR content had greater tensile strength, elongation at break, cross-link density and density. Testing also found that samples with more RR achieved higher sound absorption coefficients across a wider frequency range, showing potential as a new acoustic absorber material.
The document discusses the results of a study on the effects of exercise on memory and thinking abilities in older adults. The study found that regular exercise can help reduce the decline in thinking abilities that often occurs with age. Older adults who exercised regularly performed better on cognitive tests and brain scans showed they had greater activity in important areas for memory and learning compared to less active peers.
This document summarizes the history and offerings of Soundtect, a company that manufactures acoustic panels from recycled plastic bottles. It discusses how Soundtect introduced their unique panels in 2010 and have since expanded their product lines to include 3D sculpted panels and flat panels, testing them for acoustic and fire performance. They take pride in their environmentally friendly approach using recycled materials. The document outlines their various panel designs and sizes, intended uses, and acoustic properties. It also mentions Soundtect's growth over the years, expansion of their team, and partnership with international distributors to meet rising global demand for their products.
This document provides information about acoustic panel false ceilings. It discusses the components of a false ceiling including acoustic panels made from glass fiber and a bio-based binder. The panels have a Class A fire rating and are installed by snapping metal channels together in a grid and dropping the lightweight acoustic panels into the grid. Benefits of acoustic ceilings include sound absorption, hiding pipes and wires, and increased light reflection. A market survey for different acoustic panel companies and their product specifications is also included.
This document provides information on various sound insulation materials, including their characteristics, pricing, sizes, and intended uses. Glass mineral wool is made from recycled glass, limestone and soda ash to form fine strands that are bound together. It has good tear strength and is lightweight with low environmental impact. Rock mineral wool is made from volcanic rock and recycled slag, and has high compressive strength. It can be used for thermal insulation and fire protection. Foamed plastics like extruded polystyrene are made through an extrusion process and have high compressive strength, water resistance and freeze-thaw performance. Products like Quiet Batt and Studio Pro are high-performance sound absorbing insulation materials used residentially and commercially.
Sound insulation of buildings(10 10-'15)Ankita Sikder
This document discusses sound insulation in buildings. It defines noise and describes how noise is transmitted through air, building structures, and structural members. It differentiates between sound insulation and sound absorption. Acceptable noise levels are outlined for different building types like hospitals, classrooms, and residences. Construction methods for sound insulation are described, including walls, floors, windows, doors, and machine mounting. Walls can be made of rigid, porous, or double materials. Floors can use resilient surfaces or floating constructions. Windows and doors work best when air tight. Proper placement of buildings and isolation of noise sources are also important for sound insulation.
Factors affecting acoustic of building and their remediesDhrupal Patel
The document discusses various factors that affect acoustic quality in buildings, including reverberation time, loudness, focusing, echo, echelon effect, resonance, and noise. It provides explanations of each factor and potential remedies. Reverberation time can be optimized through the use of sound absorbing materials on walls, ceilings, floors, and furnishings. Loudness can be made more uniform through strategic placement of absorbers and use of reflecting surfaces. Curved surfaces should be avoided or covered to prevent focusing effects. Echoes and echelon effects are remedied by covering reflective surfaces. Resonance is addressed by ensuring tight fittings. Noise is categorized as airborne, structure-borne, or inside noise, each with corresponding
Acoustical considerations in designing musical auditoriums are complex with many interrelated factors. An ideal reverberation time (RT) must balance fullness of tone with loudness, definition, and diffusion. However, RT alone does not guarantee acoustic excellence - it is one contributing factor. Definition is satisfactory if the initial time delay gap is under 20 milliseconds, direct sound is loud relative to reverberant sound, and there is no echo. Providing adequate bass over large audiences is difficult since many instruments are weak in fundamentals.
The document discusses the design considerations for auditoriums and recording studios. It addresses factors like room shape, size, absorption, diffusion, and reverberation time that impact acoustics. For auditoriums, a sloped floor and splayed walls can improve speech intelligibility. Absorption is placed in seating areas while keeping the stage reflective. Recording studios require low ambient noise and optimal reverberation. Room dimensions impact resonant modes so larger, irregularly-shaped rooms are preferred.
The document discusses various acoustic panel materials and their properties that can be used to improve acoustics in auditoriums. It describes acoustic panels made of sound absorbing cotton and aluminum frames that provide wide frequency sound absorption. It also mentions decorative acoustic wall panels that have both acoustic and decorative functions. Acoustic tiles, drywall, carpet, foam and eco-friendly absorption materials are outlined with their acoustic properties and applications in rooms where optimal sound is desired such as recording studios, theaters and meeting halls. Seating for auditoriums is also covered, describing molded foam, finishes and numbered/identified seats for ease of use.
Sound is a disturbance that passes through a medium as longitudinal waves, causing the sensation of hearing. The speed of sound differs depending on the molecular composition of the medium. When sound waves encounter barriers in an enclosed space, they can be reflected, absorbed, refracted, diffused, diffracted, or transmitted. Reflection occurs when the wavelength is smaller than the surface, causing the waves to hit the enclosure continuously until the energy reduces to zero. Absorption occurs when some of the wave's energy is lost through transfer to barrier molecules. Refraction is the bending of sound waves when passing between different media. [END SUMMARY]
This document discusses various types of acoustical materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common sound absorbing materials like acoustical foam panels, fabric-wrapped panels, wall coverings, ceiling tiles, and baffles. These materials use porous materials like foam, fiberglass, and fabrics to absorb sound waves. The document also briefly mentions sound diffusers which scatter sound reflections instead of absorbing them.
Aquaris RQ® is a compact, homogeneous flooring material with a 3D quartz crystal design. It has a 2 mm thick wear layer and is treated with RQ Protect, which provides scratch resistance and eliminates the need for waxing or polishing. It is available in sheet and tile formats, comes in various colors, and is suitable for heavy traffic areas such as healthcare facilities.
GulfTrading provides building materials and kitchen equipment to customers. They offer various types of flooring including carpet, wood flooring, and vinyl flooring. They can supply and install the flooring as well. Their products are approved by various government departments. GulfTrading has experience providing products to residential, commercial, educational, healthcare, and other sectors in the UAE.
Sarpco Safe Tiles are rubber tiles made from recycled materials that are pressure molded and bonded with polyurethane. They come in red, green, and blue and are designed to reduce falls from heights up to 12 feet. The tiles are resilient, slip resistant, and environmentally friendly. They are tested to various safety standards and provide durability and impact protection for playgrounds and other surfaces.
Hydraulic BOP Flameguard 5000 range is a hydraulic control hose that operates whilst exposed directly to fire for a minimum of 5 minutes ensuring all well control operations can be effective in an emergency situation.
Fire Rated/Deluge Flameguard 300 selection is design for emergency situations where operation must continue in fire conditions. Our fire rated range is utilised on offshore installations, the hose will operate in a fire for a minimum of 30 minutes offering platform personnel an escape route in emergency situations.
Company profile SAV Chemicals pvt. ltd.Maxpromotion
We are Joint venture with Taiwan based Cartell Chemicals. With technology support from Taiwan, SAV Chemical aims to provide a total Instant Adhesive Solution to Indian market for both consumer and Industrial segments. To supply the increasing demand of instant adhesives in India, SAV Chemicals offers a range of different grades and packaging. It is a solution for a product range from low viscosity to high viscosity for applications like rubber, metal, acrylic, wood, flex and so on. With the international quality and packing standards, SAV Chemicals MXBON branded products have the USPS' of Reusable, Quick and Strong Bonding, Higher Shelf Life and Competitive Prices. We are increasing our footprints to pan India and currently started work in major cities in India.
Flotex Starck Rulo Halı - Anıl Zemin MarketBurak Yıldız
Farklı kombinasyonlar yaratın!
Son derece yenilikçi bir zemin kaplama koleksiyonu olan Flotex Starck'ın tasarımını, vizyon sahibi yaratıcı Philippe Starck ile yapıldı.
Yüksek çözünürlüklü dijital baskı
Flotex, zeminlerin kaliteli yüzeyi ile yüksek çözünürlüklü bir dijital baskı tekniği kullanan Starck koleksiyonu, benzersiz desenlere sahiptir. Ölçek ve geçiş üzerinde oynayarak, üç sistemin her biri geleneğe meydan okumakta ve iç mekan ve zemin kaplama tasarımında yeni bir bakış yaratmaktadır.
Sonsuz tasarım seçenekleri
Her bir tam tasarım kaplama deseni, 4 farklı bileşenden oluşan, on metre uzunluğa sahiptir. Merkezi bir tasarım, sol ve sağ bir geçiş tasarımı ve çeşitli vurgu renkleri içeren yarı düz bir doku tasarımı. Her bir bileşen 2 metre genişliğindedir. Tasarım sistemi ile farklı kombinasyonlar yaratmak mümkündür.
Her lokasyon ve proje için 3 farklı kategorinin, birçok renk seçeneği ve farklı kombinasyonları, her lokasyon ve projeye oldukça uyu
WATERGUARD PU MEMBRANE is a polyurethane-based, elastomeric waterproofing membrane that forms a tough, seamless, and chemically resistant layer when applied to concrete and steel structures. It adheres tenaciously to substrates and has high elongation to stretch with substrate movement. Its crack-bridging and puncture-resistant properties make it effective for waterproofing foundations, basements, floors, and other building elements.
This brochure describes Zeno Protect's entrance flooring collections that capture dirt and moisture to improve interior air quality. The collections include Excellence, Super, and Sprint made from recycled nylon that effectively traps contaminants. Installation and maintenance instructions recommend vacuuming entrance flooring daily and regularly to maximize the five-year wear warranty.
This brochure describes Zeno Protect's entrance flooring collections. The flooring is made of durable materials like recycled nylon that effectively captures dirt and moisture, improving indoor air quality and reducing maintenance costs. The collections include Excellence, Super, and Sprint options that are suitable for commercial spaces and easy to clean. Proper installation and regular vacuuming are recommended to qualify for the 5-year wear warranty.
Rockwool International is the world's largest producer of stone wool insulation, with 23 facilities in 14 countries. Their North American headquarters is located in Milton, Ontario, Canada, with another facility in Grand Forks, British Columbia, Canada. Stone wool insulation provides thermal, fire, and sound control benefits for commercial buildings. It has advantages over other insulation types such as foam and fiberglass, including fire resistance, water resistance, sound absorption, dimensional stability, and vapor permeability. Stone wool can be used in cavity walls, curtain walls, roofing systems, and interior walls.
Manufacture tough, impact-resistant plastic prototypes or
end-use parts requiring molded-part performance and
capable of withstanding harsh enviroments. Outstanding toughness and excellent impact resistance. For complex, thin-walled ductwork, consumer sporting goods, housings and enclosures applications, etc.
This document provides information on iQ Granit and iQ Granit Acoustic homogeneous vinyl floorcoverings from Tarkett, including their technical specifications, performance characteristics, available colours, and applications. The flooring materials are low-maintenance, durable, and suitable for commercial use due to their reinforced iQ PUR coating which eliminates the need for waxing or polishing. iQ Granit Acoustic additionally provides acoustic benefits through a foam interlayer. Both product lines offer a wide range of harmonizing colour options.
This document provides information about Marcel Electronics International (MEI), a privately owned electronics manufacturing company located in Orange, CA. It has been in business since 1979 and has 42,000 square feet of manufacturing space with 150 employees. MEI specializes in printed circuit board fabrication and assembly for the defense and aerospace industries as well as commercial sectors like wireless and medical. The document outlines MEI's certifications, technology capabilities, and the materials it supports for high frequency applications.
LVL floor panel systems offer several design solutions and construction advantages over concrete floors including lighter weight, faster installation, smaller cranes/foundations, and a cleaner work environment. Panel options include T-beams, cassettes, and concrete toppings. T-beams are simple and cost-effective while cassettes provide fire resistance but are more expensive. Concrete toppings provide benefits like thermal mass but also disadvantages like added weight and wet trades. Spreadsheet design allows for easy calculation of member sizes and performance checks. Acoustics and fire resistance can be achieved through suspended ceilings or fire-rated materials.
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel Beacon / Warning Light 610
Petrel hazardous area (ATEX certified) Zone 1 lighting is extensively specified for Ex de lighting applications - Petrel 610 Beacon/Warning Light features rotating beacon, xenon flashing unit, IIC as standard and integral EEx e terminal chamber.
Zone 1 hazardous area defines areas in which an explosive atmosphere caused by a mixture air and gases, vapours and mists is expected to occur occasionally.
Petrel Hazardous Area Zone 1 Lighting (ATEX) - Ex de
Petrel 610 Warning Beacon Light
Heavy duty versatile well glass for Zone 1 hazardous areas can be supplied with a range of light sources from flashing xenon to rotating beacon. Petrel 610 warning beacon light is suitable for Zone 1 gas and dust environments - this ATEX luminaire features an integral terminal chamber, external earthing and fixed or pivot mounting brackets. Coloured glass versions of the hazardous area beacon light can be supplied - SIRA certified.
Hazardous Area, Zone 1 Certification : EEx de II 2 GD IIC T3 and T4
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 610 Beacon / Warning Light
Benefits
Hazardous Area Gas Group IIC
Virtually indestructible marine grade construction
Low installation costs with integral 'e' terminal chamber (inexpensive glanding, loop in loop out cabling)
Options
Coloured glass
Internal or external reflectors
High ambient temperature versions
Wire guard
Pendant mount
Features
240v 50Hz Check for alternative voltages
-20°C to +70°C
Certified with elliptical lamps (lamps not provided) 50w, 70w, 110w SON-E and 70w SON-R 50w, 80w, 125w HPMV/MBF 25w SL or 20w PLCE 150w for Ex de Zone 1 hazardous area lighting.
This document discusses several studies related to nanocomposites and coatings:
1) Epoxy nanocomposites reinforced with nanoclay or nanotalc showed improved mechanical properties like tensile strength and scratch hardness compared to pure epoxy. The addition of 5% nanofiller gave the best results.
2) Polyvinylidene fluoride (PVDF) and PVDF/nanoclay coatings provided good corrosion prevention for metals. The PVDF/nanoclay coating gave nearly 100% protection against corrosion.
3) Thick polyetheretherketone coatings deposited by a novel thermal spray technique exhibited high hardness and strength along with chemical resistance at high temperatures. Coating
The document discusses vinyl sports flooring solutions from Omnisports, including:
- Omnisports is a multi-purpose vinyl sports flooring available in five thicknesses to satisfy different performance requirements.
- It has optimal performances through a highly cellularised acoustic foam backing that reduces sound and improves shock absorption.
- The document provides details on Omnisports Compact, Speed, Training, Reference, and Excel models, including their technical specifications.
- It also describes temporary loose-lay flooring solutions for badminton and table tennis that have game lines pre-printed and can be easily installed and stored.
Thermaloc is a closed cell polyethylene foam pipe support that:
- Provides an airtight finish and decreases installation time by locking pieces together easily.
- Will not absorb moisture or degrade over time since it is closed cell and resistant to chemicals.
- Remains durable and does not erode with pipe movement.
This document provides specifications for the Sphera StarT homogeneous vinyl floor covering, including:
1. Technical specifications such as total thickness of 2.0mm, reinforced PUR coating surface finish, and compliance with various EN ISO standards.
2. Performance ratings for properties like abrasion resistance, flexibility, seam strength, slip resistance, and reaction to fire.
3. Information on the flooring's high PVC content and durability, reinforced PUR surface, and low VOC emissions making it suitable for demanding spaces like hospitals.
4. Details the flooring's modern color and pattern options, and that it is phthalate-free and helps create a healthy indoor environment.
Insanony: Watch Instagram Stories Secretly - A Complete GuideTrending Blogers
Welcome to the world of social media, where Instagram reigns supreme! Today, we're going to explore a fascinating tool called Insanony that lets you watch Instagram Stories secretly. If you've ever wanted to view someone's story without them knowing, this blog is for you. We'll delve into everything you need to know about Insanony with Trending Blogers!
MISS TEEN LUCKNOW 2024 - WINNER ASIYA 2024DK PAGEANT
In the dynamic city of Lucknow, known for its wealthy social legacy and authentic importance, a youthful star has developed, capturing the hearts of numerous with her elegance, insights, and eagerness. Asiya, as of late delegated as the champ from Lucknow for Miss Youngster India 2024 by the DK Pageant, stands as a confirmation of the monstrous ability and potential dwelling inside the youth of India. This exceptional young lady is a signal of excellence and a paragon of devotion and aspiration.
Amid the constant barrage of distractions and dwindling motivation, self-discipline emerges as the unwavering beacon that guides individuals toward triumph. This vital quality serves as the key to unlocking one’s true potential, whether the aspiration is to attain personal goals, ascend the career ladder, or refine everyday habits.
Understanding Self-Discipline
MISS RAIPUR 2024 - WINNER POONAM BHARTI.DK PAGEANT
Poonam Bharti, a guide of ability and diligence, has been chosen as the champ from Raipur for Mrs. India 2024, Pride of India, from the DK Show. Her journey to this prestigious title is a confirmation of her commitment, difficult work, and multifaceted gifts. At fair 23 a long time ago, Poonam has as of now made noteworthy strides in both her proficient and individual lives, encapsulating the soul of present-day Indian ladies who adjust different parts with beauty and competence. This article dives into Poonam Bharti’s foundation, achievements, and qualities that separated her as a meriting champion of this award.
Confidence is Key: Fashion for Women Over 50miabarn9
Unlock your personal style and confidence at 50 and beyond! Our fashion blog provides actionable tips and inspiration on how to improve your dressing sense according to your body type, skin tone, and personal style, ensuring you look and feel amazing.
Biography and career history of Bruno AmezcuaBruno Amezcua
Bruno Amezcua's entry into the film and visual arts world seemed predestined. His grandfather, a distinguished film editor from the 1950s through the 1970s, profoundly influenced him. This familial mentorship early on exposed him to the nuances of film production and a broad array of fine arts, igniting a lifelong passion for narrative creation. Over 15 years, Bruno has engaged in diverse projects showcasing his dedication to the arts.
2. Acousto® 340/ 380 shades
AC - 447 AC - 344
AC - 555
AC - 566
AC - 343
AC - 565
AC - 559
AC - 341
AC - 448
AC - 445
AC - 551
AC - 556
AC - 342
AC - 764 AC - 766
AC - 767
WhiteLight
MilkyBeige
RustyFlake
SunnyFlake
MustardFlake
Yellow
Orange
SunFlare
MushroomMagic
ChocolateFlake
MochaDream
WineDrop
IvoryFlake
TerracotaDream
Burgundy
Red
3. *Acousto® 380 is available in all colours presented here in 3.8 mm.
Due to technical reasons, colors presented here may vary slightly during production
AC - 350
AC - 347
AC - 444
AC - 446
AC - 443AC - 441
AC - 346
AC - 561
AC - 348 AC - 562
AC - 349
AC - 345
AC - 442
AC - 765
AC - 7632349 - 768
BlueDust
BlueForm
BlueFlake
Blue
SnowFlake
MistyGrey
BlueFlake
MidnightBlue
GreenFern
Ripples
Green
RockyPool
GreySlate
MuddyGrey
DarkNight
BlackSlate
4. Heterogeneous multilayered flooring
Acousto® 340/ 380 product overview
Pure PVC wear layer
PUR reinforced, no wax no polish
Anti-bacterial and
anti-fungal treatment
Attractive printed design
Glass fiber grid reinforcement
Acoustic foam backing
Applications
• Class rooms
• Corridors
• Hotels
• Oldage homes
• Residential community
• Play areas
• Auditoriums
• Meeting rooms
Special Features
• Super sound insulation
• PUR extra clean
• Increased underfoot comfort
• No wax, no polish
• 3 printed all over designs
in a wide range of shades
• Pure PVC
transparent wear layer
• VOC compliant
Acousto® 340 is an acoustic comfort vinyl floor covering in
a total thickness of 3.40mm with a 0.6mm transparent wear
layer. Acousto 340 has Responsive's proprietary foam backing
with underfoot comfort and sound insulation properties at
17dB reduction
Acousto® 380 is an acoustic comfort vinyl floor covering in
a total thickness of 3.80mm with a 0.7mm transparent wear
layer. Acousto 380 has Responsive's proprietary foam backing
with underfoot comfort and sound insulation properties at
19dB reduction.
The design is obtained from a printed film in three all-over
patterns; the transparent wear layer protects the design
and the product is stabilized with a glass fibre grid and
PVC backing
The surface of the product is processed with an easy clean
PUR surface treatment that reduces maintenance by delaying
wax and polish operations and by acting as a barrier against
stains and chemical aggression.
Acousto® 380 complies with the EN 649 norm (34-42), has
a group T abrasion rating, is anti bacterial and anti-fungal
throughout its entire wear layer thickness. It is an ideal solu-
tion for medium to heavy traffic applications where design,
durability, hygiene and easy maintenance are required.
Group T PUR 19 dB
sound insulation
super
Acousto® 340 / 380 are VOC (≤ 1⁄2 Chronic REL) and
formaldehyde compliant (≤ 9.0 μg/m3 ) according to the CDPH/
EHLB/Standard, Method V1.1-2010 (certificate 120316-01).
5. Acousto® 340 / 380 technical specifications
ind
ian green building coun
cil
®
Comfort acoustic flooring
34 - 42
T
Medium to heavy foot traffic
PUR : no wax no polish
3.40 3.80
0.60 0.70
2900 2975
2
15 / 20
30 / 40
300 x 300
500 x 500
610 x 610
T
< 2
< 0.40
< 0.20
0.11 | 0.13
800
R 10
NA
DS (> 0.30)
Pass (0.70 avg)
< 0.40
< 20
Pass
Continuous
17 19
> 8
Pass
Bfl - S1
1
< 2.0
< 1010
(Antistatic)
< 0.00752
Pass
< 450
> 6
12 13
0 (Excellent resistance)
Pass
< 0.1 (none detected)
Does not favour growth
Pass
A, non shedding
Description
General performance
Usage
Special treatment
Overall thickness
Thickness of wear layer
Weight
Sheet size
Tile size
Abrasion resistance
Residual indentation
Slip resistance
Dimensional stability
Flexibility
Castor chair test
Sound insulation
Reaction to fire
Static electrical propensity
Electrical resistance
Thermal resistance
Smoke density
Colour fastness to light
Walking resonance
Stain & chemical resistance
Fungi & bacteria resistance
Clean rooms
EN 651
BS EN ISO 10874: 2012
BS EN 649 : 2011
EN 428
EN 429, ASTM F410
EN 430
EN 426
EN 427
EN 660 -2
EN 660 -2
ASTM D3389
(Weight loss / 1000 cycles)
EN 433
ASTM F970 (static load)
DIN 51130
BS 7976-2 (pendulum method)
EN 13893
ASTM D2047
EN 434
EN 435
ASTM F137
EN 425
EN ISO 717-2
EN ISO 9239-1: 2010
EN ISO 11925-2: 2010
EN 13501-1:2007+A1: 2009
ASTM E648-06
EN 1815
EN 1081
ISO 8302 (EN 12664)
ASTM 1514
ASTM E 662-05
EN ISO 105 - B02
NF XPS 31 074
BS EN ISO 26987: 2012
ASTM F925
(E1) PCP
ASTM G - 21
ASTM D3273
ASTM F51/68
Class
Group
mm
mm
g/m2
m (width)
m (length)
m2
(surface area)
mm x mm
Group
Volume loss mm3
g
mm
psi
Coefficient
of friction
%
mm
Type of use
∆ Lw = dB
kW/m2
Class
Type
kV
Ω
k/W m2
Dm
Degrees
dB
Index
%
Class
descriptionperformance
Characteristics Standards Units Acousto® 340 Acousto® 380
*NA - Not applicable
Standard
Measure
The above data is valid at the time of print. For more details regarding technical specifications, handling and installation, please contact Responsive Industries Ltd.
42