The document provides step-by-step instructions for importing HR support packages into an ECC6 system with EHP4. It outlines preparing the system by applying required notes and patches. It then details downloading the support packages from SAP Solution Manager, defining the import queue, performing the import using SPAM, and completing post-import steps like adjusting custom code and regenerating objects. The process involves pausing at phases for adjusting custom objects with transactions SPDD and SPAU before resuming the import.
A logical component in the SAP Solution Manager project contains at least one system with the role Retrofit System.
If a change is done in DEV1, this change must also be done in DEV2 to maintain the synchronization this is the reason for retrofit, to bring the changes made in DEV1 to DEV2
A logical component in the SAP Solution Manager project contains at least one system with the role Retrofit System.
If a change is done in DEV1, this change must also be done in DEV2 to maintain the synchronization this is the reason for retrofit, to bring the changes made in DEV1 to DEV2
(ATS6-PLAT08) AEP in a Validated EnvironmentBIOVIA
Validation requires well documented plans, practices, and records to prove a system is operating correctly. Attend this session to learn more about how Accelrys Enterprise Platform can be effectively deployed in validated environments and tooling that is available to assist in validating AEP deployments.
Upgrade to IBM z/OS V2.4 technical actionsMarna Walle
Yes, "upgrade" is the new name for these traditional "migration" sessions! This is part one of a two-part session that will be of interest to System Programmers and their managers who are upgrading to z/OS 2.4 from either z/OS 2.2 or 2.3. It is strongly recommended that you review sessions for a complete upgrade picture.
The general availability date for z/OS V2.4 was September 30, 2019.
Upgrade to IBM z/OS V2.5 technical actionsMarna Walle
Yes, "upgrade" is the new name for these traditional "migration" sessions! This is part one of a two-part session that will be of interest to System Programmers and their managers who are upgrading to z/OS V2.5 from either z/OS V2.3 or V2.4. It is strongly recommended that you review sessions for a complete upgrade picture.
The general availability date for z/OS V2.5 was September 30, 2021.
(ATS6-PLAT08) AEP in a Validated EnvironmentBIOVIA
Validation requires well documented plans, practices, and records to prove a system is operating correctly. Attend this session to learn more about how Accelrys Enterprise Platform can be effectively deployed in validated environments and tooling that is available to assist in validating AEP deployments.
Upgrade to IBM z/OS V2.4 technical actionsMarna Walle
Yes, "upgrade" is the new name for these traditional "migration" sessions! This is part one of a two-part session that will be of interest to System Programmers and their managers who are upgrading to z/OS 2.4 from either z/OS 2.2 or 2.3. It is strongly recommended that you review sessions for a complete upgrade picture.
The general availability date for z/OS V2.4 was September 30, 2019.
Upgrade to IBM z/OS V2.5 technical actionsMarna Walle
Yes, "upgrade" is the new name for these traditional "migration" sessions! This is part one of a two-part session that will be of interest to System Programmers and their managers who are upgrading to z/OS V2.5 from either z/OS V2.3 or V2.4. It is strongly recommended that you review sessions for a complete upgrade picture.
The general availability date for z/OS V2.5 was September 30, 2021.
Dicas de usabilidade para melhorar a experiência do usuário com o seu produtoPaula Azevedo Macedo
Apresentação para startups da aceleradora Oxigênio - Porto Seguro. Conteúdo engloba o contexto de UX onde a usabilidade está inserida e detalhamento sobre análise de heurística e como melhorar a experiência do usuário com interfaces digitais
This slide contains steps for upgrading OJS 2 to the OJS 3 latest. The upgrade process itself involves quite complex steps starting from retrieving the main files to collecting the database. Based on our experience, this takes at least 1 to 2 days. If you want it to be easier and simpler to upgrade your OJS, you can use our OJS Upgrade Service. Please contact us by visiting our official website at openjournaltheme.com.
Orangescrum Time Log Add-on User ManualOrangescrum
The Time Log User Manual will help you how can you automate your time tracking & install the add-on in your system. For add-on details, please visit: http://www.orangescrum.org/add-on/timelog
Retail Analytics, with Oracle Data Integrator 11G.
Points about ODI Objects, Interfaces, Variables, Packages, Scenarios, Load Plans, Scheduling.
Batch Scheduling with RA 14.2, UAF in 14.2, Error Managment in RA 14.2
Key Features of The Italian Restaurants.pdfmenafilo317
Filomena, a renowned Italian restaurant, is renowned for its authentic cuisine, warm environment, and exceptional service. Recognized for its homemade pasta, traditional dishes, and extensive wine selection, we provide a true taste of Italy. Its commitment to quality ingredients and classic recipes has made it a adored dining destination for Italian food enthusiasts.
Ang Chong Yi Navigating Singaporean Flavors: A Journey from Cultural Heritage...Ang Chong Yi
In the heart of Singapore, where tradition meets modernity, He embarks on a culinary adventure that transcends borders. His mission? Ang Chong Yi Exploring the Cultural Heritage and Identity in Singaporean Cuisine. To explore the rich tapestry of flavours that define Singaporean cuisine while embracing innovative plant-based approaches. Join us as we follow his footsteps through bustling markets, hidden hawker stalls, and vibrant street corners.
Roti Bank Hyderabad: A Beacon of Hope and NourishmentRoti Bank
One of the top cities of India, Hyderabad is the capital of Telangana and home to some of the biggest companies. But the other aspect of the city is a huge chunk of population that is even deprived of the food and shelter. There are many people in Hyderabad that are not having access to
At Taste Of Middle East, we believe that food is not just about satisfying hunger, it's about experiencing different cultures and traditions. Our restaurant concept is based on selecting famous dishes from Iran, Turkey, Afghanistan, and other Arabic countries to give our customers an authentic taste of the Middle East
Piccola Cucina is regarded as the best restaurant in Brooklyn and as the best Italian restaurant in NYC. We offer authentic Italian cuisine with a Sicilian touch that elevates the entire fine dining experience. We’re the first result when someone searches for where to eat in Brooklyn or the best restaurant near me.
1. Step-by-Step process of Importing Support
Packages into ECC6 EHP4 System
Sep 26
Posted by Murtuza
In this blog we look at a step-by-step procedure to import HR support packages (HR Sp 16 to 20)
& (EA-HR 16 to 20) into a ECC6 system with EHP4.
The most important part of the installation is the preparation work. This is absolutely critical that
side-effect notes, relevant basis notes and patches are applied before applying the support
packages (see appendix). 99% Preparation, 1% perspiration!
Remember you can only download SP’s from Solution manager (well sort of). What SolMan
really does is generate the link for you to download the SPs. Once you have the link generated,
you can just call the link from your browser independent of SolMan (see appendix on process).
Another point I want to highlight is in this scenario, we are simply updating a subset of Support
packages i.e HR support packages and not the Support Pack ‘Stack’. Whilst it is recommended to
apply the stack, this is not always practical and feasible due to resources, availability to test and
other complexities in large SAP landscapes.
1.1 Check all pre-requisites are met, e.g file system space, SAP notes, locked users, etc. See appendix
below for checklist of what to do.
1.2 Login to Client 000 with a Super User (SAP_ALL/SAP_NEW)
1.3 Ensure all the required SP’s have been downloaded from the SAP Marketplace and have been
unzipped/uncarred into the …./EPS/in folders. The process of identifying which SP’s to load and the
interdependencies is a separate task on its on and usually conducted in conjunction/direction of the
application/functional team
1.4 Load SP’s from App server (you must first download the *.SAPCAR files and extract it in
…usr/sap/trans/EPS/in
1.5 Define Queue. – Essentially what you are doing here is telling SAP which SPs you want to import. It is
intelligent enough to calculate interdependencies.
2. Load the SP’s from the Application server (after you have unzipped them into the ../EPS/in
folder). Pick the highest SP number. (It will automatically included other SP’s or dependencies.).
If you are importing SP for different modules e.g HR, Finance, etc, then you may need to build
the queue and change the settings to “Calculation for a Vector of components”.
Queue calculation for a vector of software components:
The Support Package queue calculation takes place for multiple software components based on
the target Support Package level that has been defined for each software component (see
Defining a Queue Based on Multiple Software Components).
1.6 Check SPAM settings:
You can schedule more parallel processes if you like and if you system can support. These are
the typical settings I use when importing initially into a development system
Check if the SPAM settings are as follows :
Section Import queue
Create new datafile = Yes (only in DEVELOPMENT)
Delete data file after import = No
Section ABAP/Screen Generation
3. Generate screen = Never
1.7 Import Support Packages (Shift + F7)
This step onwards basically kicks starts the SP import process. From now onwards, there is no
going back (well almost).
Please refer to link on SAP Help below for known errors during import:
http://help.sap.com/saphelp_nw04/helpdata/en/7e/c6c2ad98a711d2b429006094b9ea64/content.h
tm
Generally I Run phase 1 in ‘dialog mode’ and all other phases in ‘background’ mode
4. These are the various phases the SPAM goes through during the import process. You will see the
phases change in the ‘Status’ section in tcode SPAM:
Preparation Module
…
1. PROLOGUE
This phase checks whether you are authorized to import Support Packages.
2. CHECK_REQUIREMENTS
This phase checks various requirements for importing a Support Package, for example, whether
the transport control program tp can log on to your system.
3. DISASSEMBLE
This phase unpacks files from the appropriate EPS parcels and saves them to the transport
directory.
4. ADD_TO_BUFFER
This phase places the queue in the transport buffer of your system.
5. MODIFY_BUFFER
This phase prepares the transport buffer for correct processing of the following import phases.
6. TEST_IMPORT
5. This phase performs a test import for the queue with the transport control program tp. The
system checks whether there are objects that are in open repairs and that are overwritten during
the import, or whether other conditions prevent the import of an object.
7. IMPORT_OBJECT_LIST
This phase imports the object lists for the Support Packages in the queue into the system.
8. OBJECTS_LOCKED_?
This phase checks whether there are objects that are overwritten by the import, and that are still
in unreleased requests.
9. ADDON_CONFLICTS_?
This phase checks whether there are conflicts between objects in the queue and any installed
add-ons.
10. SCHEDULE_RDDIMPDP
This phase schedules the transport daemon (program RDDIMPDP).
Import 1 Module
11. CREATE_VERS_BEFORE
This phase generates versions of the objects that are contained in the Support Packages in the
queue (if this option is set).
12. SPDD_SPAU_CHECK
In this phase, the system checks if a modification adjustment is necessary (transactions
SPDD/SPAU).
13. DDIC_IMPORT
This phase imports all ABAP Dictionary objects in the queue.
14. AUTO_MOD_SPDD
This phase checks whether all modifications to ABAP Dictionary objects can be adjusted
automatically.
15. RUN_SPDD_?
6. In this phase, you are asked to adjust your modifications to the ABAP Dictionary objects by
calling transaction SPDD.
16. LOCK_EU (only for import mode downtime-minimized)
This phase locks the development environment.
17. INACTIVE_IMPORT (only for import mode downtime-minimized)
This phase imports program code and program texts in an inactive state.
18. DDIC_ACTIVATION
This phase activates the imported ABAP Dictionary objects.
Import 2 Module
19. IMPORT_PROPER
This phase imports all the Repository objects and table entries if they were not already imported
in the INACTIVE_IMPORT phase. This is preceded by actions such as table conversion and
activation of the name tabs.
20. PREPARE_XPRA
This phase prepares the execution of the XPRAs and after-import methods.
21. UNLOCK_EU (only for import mode downtime-minimized)
This phase unlocks the development environment.
22. AUTO_MOD_SPAU
This phase checks whether modifications can be adjusted automatically.
23. XPRA_EXECUTION
This phase executes the XPRAs and after-import methods.
24. ABAP_GENERATION
This phase generates the runtime objects for the imported Repository objects (ABAP source texts
and screens).
Clean Up Module
7. 25. RUN_SPAU_?
This phase prompts you to adjust your modifications to Repository objects by calling transaction
SPAU.
26. CLEAR_OLD_REPORTS (only for import mode downtime-minimized)
This phase deletes the obsolete versions of program code and program texts in the database.
27. EPILOGUE
This phase completes the import. Among other things, it checks whether the queue has been
processed completely.
1.8 Main Import Phases and Actions required.
In the following steps below, I only highlight only the main phases and the necessary actions
required. Generally if you have done your homework and checked and met all prerequisites, you
should a relatively smooth import process.
1.8.1 SPDD Adjustment – Handover to Developer
8. SPAM -> Goto -> Status – Queue to confirm adjustment to proceed to next phase
9. 1.9 SPAU Adjustment
After the SPDD is completed, it will go through a number of phases and eventually pause at
SPAU adjustment phase (RUN_SPAU). Now again, ask the developers to continue with the
SPAU adjustments (This is only done in Development systems. For changes to take place in all
downstream systems, transports are created and imported into e.g QA and PROD and usually
after the SP’s are applied).
10. Once developers complete their SPAU adjustments successfully (be patience, this can take from
several hours to a week or more depending on size of landscape and amount of customising),
simply resume i.e Goto Support Package -> Import Queue (similar to SPDD steps)
1.10 Tail end – EPILOGUE
Finally, it all goes well, the last phase is the EPILOGUE as shown below. This should not take
that long and once completed, you proceed to confirm (or complete) the import with the next
step
11. Once EPILOGUE completed, the Status will turn Yellow. You must then go to Support Packages
-> Confirm (Shift F6) to close off or complete the SP implementation.
1.11 Lastly, CONFIRM queue
Method to confirm queue shown below.
12. 2 Post Steps – SGEN
Once import is completed, proceed to run SGEN to recompile all the new imported objects
before releasing the system. Steps shown below.
Run SGEN with options
Regeneration of existing loads
Only generate objects with invalid loads
Wait until finished !
13.
14. Appendix – Additional Info
2.1 Checklist before Import of SPs
This is my checklist but others may have more to add (or remove!)
1. Confirm and sign-off the support pks and combination of SPs that will be applied and
project/test team available for testing
2. Verify all functional and cross-system dependencies are met. Must review and OSS note
822379 (netweaver 7 version)
3. Enough Disk space and atleast 85% free space on sapdata filesystem
4. Check if file system /usr/sap/trans/data and ../EPS/in has free space, if not clean-up old
support package data files or Pat files in EPS/in
5. Post a system message & a login screen message indicating the outage (refer to procedure
Applying Support Packages).
6. Check if no tablespace is over 85 % full
7. Verify if you have a recent backup., if not schedule a full on-line backup. If production,
have a backup just before Support pkgs to be safe.
8. Unpack all required SP’s and then load them into SPAM and verify that all queues are
OK e.g SAPCAR -xvf /sapcd/sp/XXXXXXX.CAR –V
15. 9. Update Spam with latest version from Service marketplace. Also ensure binaries R3trans and
tp are updated if necessary. If you are not sure, usually it will not hurt to update these anyway.
10. Define Queue and perform TEST import and report any SPDD/SPAU conflicts to
project/developers
2.2 Using SolMan to download Support Packages
Call tcode /nsolution Manager
Select the Solution ‘SAP Solution’ if you are going to download SP’s for ECC 6.0 SAP System
for your environment.
Create a new ‘Maintenance Optimizer’ or use existing
Here you can select the SP’s to download either manually and automate i.e Let SAP decide
16. A Web browser window will pop up and you need to manually look for and select the e.g HR
support pkgs.