1. Personal Particulars
Age : 29 Years
Date of Birth : 9 March 1986
Nationality : Timor Leste
Gender : Male
Marital Status : Single
IC No. : 00571707
Permanent Residence : Timor Leste
Educational Background
Diploma
Field of Study : Engineering
Major : Mechanical
Institute/University : InstitutTeknologiAdhi Tama Surabaya, Indonesia
Graduation Date : Desember 2014
Employment History
Onshore Experienced
1). Execute work and testing of equipment onshore according to authorized procedure and
practices. Ensure it is compliance with technical integrity standards and project procedures.
2). Involved with onshore preparation for Wellhead such as running tool preparation, make-up
connection and stab in job for 18 ¾ Wellhead Assy.
3). Involved in onshore preparation for intermediate casing program such as 13 3/8”, 10 ¾ & 9
5/8 casing hanger.
4). Performed refurbishment, service and testing of running tool such as DAT Tool, CAM Tool,
Single Trip Tool (STT), Spring Loaded Tool, Lock Down Bushing, ASART, Rigid Lock Setting
Tool, Ball Valve Assy, ROV Panel and etc.
5). Report any deviation, faults and anomalies to engineering department for disposition
action require.
6). Involved with Subsea tree Pre-Installation Testing such as pressure testing of Multiple
quick connect (MQC),surfaceTree, Tubing Hanger, Hot stab
7). Experiences perform for Subsea equipment
8). Performed Pressure Testing on service and testing of ,Single Trip Tool (STT), Rigid Lock
Setting Tool, Ball Valve Assy, ROV Panel and Wellhead Running Tool.
Name : Rui Nelson Lopes Magno
Address : Dili, Timor Leste
Mobile No. : +670424459
Email : ruinelsonlopesmagno@.com

2. Murphy Kikeh Project/ Nippon Oil Project/ PetronasCarigali Project
1). Review document for:
 Item received from other FMC plant.
 Re-work done at Labuan base such as MPI & blasting painting.
 New fabricate item or item supply by supplier.
2). Receiving/ incoming inspection for received equipment from other FMC plant or supplier.
3). Involved with re-work job for riser spacer joint such as witness for NDT, blasting painting
and work together with contractor & 3rd party.
4). Work closely with Murphy 3rd party for make-up job and pressure test on tubing hanger.
Prepare all report related to the job done for 3rd party endorsement.
5). Involved with replacement job for centralizer bushing such as:
 Visual inspection on used bushing and prepare report.
 Receiving inspection and document review for new bushing.
 Prepare report for good receive inspection.
 Ensure installation following specification/ procedure and meet customer requirement.
6). All the sling and basket/ toolbox send to offshore must have:
 Proper documentation.
 Visual inspection on sling and MPI or load test for basket/ toolbox is valid.
7). Work together with 3rd party for overdue visual inspection, MPI and load test for sling and
basket/ toolbox.
8). Performed visual inspection, dimensional check, surface roughness check, witness for
dismantle and assemble PRT/DRT and witness for pressure test according to FMC procedure
and customer requirement.
9). Involved with re-work job for PRT(production Riser Tensioner) rework job such as
disassemble and re-assemble job, machining and polishing and testing on completed PRT.
10). Prepare documentation for the job done.
Shell Project (Gumusutproject,RosmaryProject,Marjarom project), Murphy Project,
Total project,PVEP Vietnam project,Petronas Project , Conoco Phillips Project-
Bayuundan&bawal)
1). Involved with onshore preparation for Wellhead such as running tool preparation, make-up
connection and stab in job for 18 ¾ Wellhead Assy.
2). Involved in onshore preparation for intermediate casing program such as 16”Submudline
Casing Hanger, 13 3/8”, 10 ¾ & 9 5/8 casing hanger.
3). Involved with Shell Subsea Intervention/Work Over Onshore preparation such as
preparation of Emergency Disconnect Package (EDP),Lower Riser Package(LRP) & pressure
testing of Riser Mono Bore, Pup Joint, X-Over & Specialty Joint.
1). Prepare/ re-certification of lifting and hoisting tackle such as:
 Sling - record with document and serialization.
 Basket - record with document and serialization.
 Shackle - record with document and serialization.
 Swivel - record with document and serialization
5). Ensure inspection tool, testing tool like pressure gauge and chart recorder is calibrated.
6). Filing and documentation compilation.
7). Review document for:
 Item received from other FMC plant.
 Re-work done at Labuan by FMC vendor (CoC, MPI &etc).
8). Receiving/ incoming inspection for received equipment from other FMC other FMC plant
and put into SAP system. Raise quality notification for any non-conformance finding.

3. 9). Re-qualify all the sling, container and basket following SMEP and British standards as per
customer requirement.
10). Re-certify all the rotary connection following DS-1 standards to met customer
requirement.
11). Ensure all equipment is inspected and have proper document prior to make-up.
12). Witness together with 3rd party for make-up job.
13). Witness together with 3rd party for pressure test done on FMC equipment.
14). Prepare document and pre-load out inspection with 3rd party prior to load out equipment
to offshore.
15). Involved with MMR job for every item back loaded from offshore such as:
 Visual inspection with dimensional check.
 Prepare MMR report.
 Witness together with 3rd party for MPI and pressure test done on FMC tools. Prepare
report for the job done on FMC tools.
 Ensure tool assemble and function test as per procedure.
Course
1). Level 1 & level 2 Cresent Certificate of Training Pressure Testing
2). Certificate Technical Drawing
3). Certificate of Personal Protective Equipment (PPE)
4). Certificate of crane
Top Skills
(Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic
functionalities; Beginner - Just started using or learning the skill)
Skill Months Proficiency
Technician 15 Intermediate
Languages
(Proficiency: 0=Poor - 10=Excellent)
Language Spoken Written
Bahasa Malaysia 10 10
English Language 8 8
Portugues 6 6
Availability : Immediately after notice period of 4 weeks.

4. References
Margaret Briggs
Relationship : Friend
Position :HR Manager
Tel : +60438900569
Frank Lavie
Relationship : Friend
Position : MMRS Manager FMC Technologies.Malaysia
Tel : +60177459858