NDMP backup models
•
0 likes•195 views
Intercluster LIFs are preferred over data LIFs for NDMP control and data communication to ensure firewall access. If only data LIFs can be used, connection depends on the order interfaces appear in ifconfig output, not a hardcoded selection. More details are available at the provided KB article on properly configuring LIFs and firewall policies for NDMP backups.
Report
Share
Report
Share
Download to read offline
Recommended
Www ccnav5 net_ccna_1_chapter_4_v5_0_exam_answers_2014
This document provides the answers to exam questions for CCNA 1 Chapter 4 v5.0 from 2014. It includes 23 multiple choice questions and answers related to networking concepts like physical layer protocols, fiber optic cabling, Ethernet standards, wireless networks, and more. The questions assess knowledge of topics like frame encoding techniques, multimode fiber, OSI model layers, throughput calculations, cable interference factors, wireless network concerns, and data link layer functions.
Understand LPWA tetchnologies (Sigfox and LoRa)
What are LPWA networks and what are their advantages ?
What are their characateristics in comparison with other telecom technologies ?
What are the differences between LPWA technologies, especially Sigfox and LoRa ?
Implementing lora smartcity doin
This presentation shows implementation of a LoRa RF layer in a multistandard SmartCity deployment, with decision making rationale and technical challenges analysis.
LoRa vs Sigfox vs LTE-M
Which solution you should choose to deploy your IoT network.
LoRa, Sigfox, LTE-M are very similar in nature and functionality, which can confuse you during the decision-making process.
Social CDN Business : Paid or Free - bdNOG12 Panel Discussion
This document discusses social CDN businesses and costs associated with operating CDN nodes in Bangladesh. It notes that CDN services cache internet traffic, multiplying bandwidth by 15 times. It estimates the monthly costs to operate a single CDN node in Bangladesh, including electricity, cooling, and upstream bandwidth costs totaling over $5000 USD per node. With over 500 nodes currently operating in Bangladesh, the total annual expenditure for ISPs is estimated to be over $2.5 million USD. The document compares this situation to other countries where large tech companies like Google and Facebook directly invest in infrastructure. It concludes with announcing a panel discussion on the topic between representatives from Bangladesh and other countries.
Ccna 1 chapter 1 v5
This document contains questions and answers about networking concepts. It covers topics like internet connectivity types, network functions, security goals, and characteristics of networks. For example, it states that cable and DSL provide always-on high-bandwidth internet connections, and that routers determine the path that messages take through internetworks. It also addresses concepts like BYOD, cloud computing, and wireless LAN redesign due to increased use of personal devices on networks.
Lasseq f can
CAN-HG is a protocol that augments the existing CAN protocol to provide higher speeds of up to 10Mbps and security features like message authentication. It works by adding "fast bits" of data within the bits of standard CAN frames. The CAN-HG protocol includes headers and bodies that can be embedded in CAN frames without interfering with existing CAN systems. It also defines security mechanisms like bus guardians and an intrusion detection prevention system to authenticate messages and prevent spoofing or denial of service attacks on the bus.
CGNAT Wide Screen
ZCorum is a privately held company that provides broadband and networking solutions including carrier-grade network address translation (CGNAT) to help telecommunications companies reduce costs and improve the subscriber experience, as CGNAT allows operators to extend limited IPv4 addresses and facilitate migration to IPv6 while maintaining quality of service.
Recommended
Www ccnav5 net_ccna_1_chapter_4_v5_0_exam_answers_2014
This document provides the answers to exam questions for CCNA 1 Chapter 4 v5.0 from 2014. It includes 23 multiple choice questions and answers related to networking concepts like physical layer protocols, fiber optic cabling, Ethernet standards, wireless networks, and more. The questions assess knowledge of topics like frame encoding techniques, multimode fiber, OSI model layers, throughput calculations, cable interference factors, wireless network concerns, and data link layer functions.
Understand LPWA tetchnologies (Sigfox and LoRa)
What are LPWA networks and what are their advantages ?
What are their characateristics in comparison with other telecom technologies ?
What are the differences between LPWA technologies, especially Sigfox and LoRa ?
Implementing lora smartcity doin
This presentation shows implementation of a LoRa RF layer in a multistandard SmartCity deployment, with decision making rationale and technical challenges analysis.
LoRa vs Sigfox vs LTE-M
Which solution you should choose to deploy your IoT network.
LoRa, Sigfox, LTE-M are very similar in nature and functionality, which can confuse you during the decision-making process.
Social CDN Business : Paid or Free - bdNOG12 Panel Discussion
This document discusses social CDN businesses and costs associated with operating CDN nodes in Bangladesh. It notes that CDN services cache internet traffic, multiplying bandwidth by 15 times. It estimates the monthly costs to operate a single CDN node in Bangladesh, including electricity, cooling, and upstream bandwidth costs totaling over $5000 USD per node. With over 500 nodes currently operating in Bangladesh, the total annual expenditure for ISPs is estimated to be over $2.5 million USD. The document compares this situation to other countries where large tech companies like Google and Facebook directly invest in infrastructure. It concludes with announcing a panel discussion on the topic between representatives from Bangladesh and other countries.
Ccna 1 chapter 1 v5
This document contains questions and answers about networking concepts. It covers topics like internet connectivity types, network functions, security goals, and characteristics of networks. For example, it states that cable and DSL provide always-on high-bandwidth internet connections, and that routers determine the path that messages take through internetworks. It also addresses concepts like BYOD, cloud computing, and wireless LAN redesign due to increased use of personal devices on networks.
Lasseq f can
CAN-HG is a protocol that augments the existing CAN protocol to provide higher speeds of up to 10Mbps and security features like message authentication. It works by adding "fast bits" of data within the bits of standard CAN frames. The CAN-HG protocol includes headers and bodies that can be embedded in CAN frames without interfering with existing CAN systems. It also defines security mechanisms like bus guardians and an intrusion detection prevention system to authenticate messages and prevent spoofing or denial of service attacks on the bus.
CGNAT Wide Screen
ZCorum is a privately held company that provides broadband and networking solutions including carrier-grade network address translation (CGNAT) to help telecommunications companies reduce costs and improve the subscriber experience, as CGNAT allows operators to extend limited IPv4 addresses and facilitate migration to IPv6 while maintaining quality of service.
Improving the peering business case with RPKI
This document discusses how RPKI (Resource Public Key Infrastructure) can improve the security and business case for peering. It outlines how RPKI helps protect against hijacking and misconfigurations by validating the origin ASN and prefix length of BGP announcements. For internet exchange points (IXPs), the document recommends that IXP operators create RPKI ROAs (Route Origin Authorizations) for their peering LAN prefixes and configure route servers to reject invalid routes to prevent routing issues on the peering network. Adopting RPKI-based validation makes direct peering and route servers more secure while simplifying operations for network operators.
NETWORKING, COMMUNICATION SYSTEMS AND SCADA
Networking allows computers and devices to communicate and share resources through interconnected communication channels. A network's performance is measured in bits per second. VLANs allow hosts to communicate as if on the same broadcast domain even if not on the same switch. Switches use MAC addresses to forward frames while routers use addresses to determine a packet's destination and direct it accordingly. The proposed network layout for ONGC improves redundancy, controls data flow, reduces load, and serves as a backup in case of failures.
NETWORKING, COMMUNICATION SYSTEMS AND SCADA
Networking allows computers and devices to communicate and share resources through interconnected communication channels. A network's performance is measured in bits per second. VLANs allow hosts to communicate as if on the same broadcast domain even if not on the same switch. Switches use MAC addresses to forward frames while routers use addresses and routing tables to direct packets between networks. The proposed network layout for ONGC improves redundancy, controls data flow, and reduces load compared to the old network.
Openstack meetup: NFV and Openstack
How NFV , Network Function Virtualization for Telecom Networks, works ?
What are the requirements towards Openstack ?
What are the use cases ?
PLNOG 7: Emil Gągała, Sławomir Janukowicz - carrier grade NAT
The document discusses the requirements and experiences of carrier grade NAT (CGN) technology, including what CGN is, how it relates to IETF standards, managing subscriber sessions, flow analysis of subscriber behavior, logging optimization techniques like port block allocation and deterministic NAT, and the evolution of CGN including port forwarding and the new Port Control Protocol (PCP).
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment Bangladesh Network Operators Group
The L2 NID based architecture for vCPE/NFV deployments faces several challenges:
1) It can cause MAC address scale issues in the NFV data center switching infrastructure as thousands of customer MAC addresses may need to be learned.
2) It extends customer layer 2 domains to the NFV data center, increasing security risks from misconfigured customer networks.
3) There is a potential risk of layer 2 loops occurring between customer networks and the service provider infrastructure without proper demarcation and loop prevention.
4) Achieving high availability between redundant vCPE instances requires reliable tracking of the connectivity between the L2 NID and vCPE, which adds complexity.Unit 2
The document discusses several topics related to computer networking:
1. It defines the hidden node problem as occurring when two nodes sending to a common destination are unaware of each other's transmissions, which can cause frame collisions.
2. It describes Bluetooth as a short-range wireless technology used to connect devices like mobile phones and laptops, with advantages like immediate ad-hoc connections without wires and low power consumption.
3. It lists types of connecting devices in internetworking like hubs, repeaters, network interface cards, media converters, and basic switches and bridges.
2016 06-10-ieee-sdn (1)
This document discusses managing multi-layer networks and the challenges of closing the control loop in autonomic networks. It proposes using the Recursive InterNetwork Architecture (RINA) model, which provides a common structure and set of protocols across layers to simplify network management. RINA could reduce costs and downtime compared to the Internet Protocol (IP) model with its many isolated protocols for each layer. The document provides examples of how data center networks and service provider networks could be modeled and managed using RINA.
Brocade Administration & troubleshooting
The document provides information about Brocade SAN switches including their product lines, features, and specifications. It discusses various switch models ranging from 8-port to 384-port configurations supporting 1, 2, 4, 8, and 10Gbps speeds. Features covered include dynamic path selection, ISL trunking, extended fabric, hardware-enforced zoning, advanced performance monitoring, and FCIP tunneling. The document also reviews FOS enhancements, new 10Gbps blades, and concepts like NPIV and NPV.
Shanghai Breakout: Mobile Devices and Wi-Fi
The document discusses several topics related to mobile devices and Wi-Fi, including:
1) The commercial value chain prioritizes cellular operators and consumers over enterprise users, though this is changing.
2) Device models are optimized for single home access points rather than enterprise wireless LANs with multiple access points.
3) Battery life is overly prioritized, limiting probing for better access points and adoption of features like QoS that could improve performance.
Www ccnav5 net_ccna_1_chapter_1_v5_0_exam_answers_2014
This document contains 21 multiple choice questions and answers from the CCNA 1 Chapter 1 v5.0 exam. The questions cover topics like internet connection types, network devices, security goals, and network congestion. Answers are provided for each question about concepts addressed in the CCNA curriculum.
ccna 4 final 2012
The document appears to contain questions and answers from the CCNA 4 final exam. It includes questions about topics like Frame Relay configuration, PPP negotiation failure troubleshooting, ACL usage, VLAN performance testing, VPN technology selection and DHCP address pool configuration issues. The questions cover a wide range of Cisco networking technologies tested on the CCNA 4 certification exam.
Ccna 4 final exam answer v5
R1 is configured to use SNMP version 2 to communicate with a management station at IP address 192.168.1.3. However, the administrator is unable to get any information from R1. The problem is likely due to an issue with the ACL configuration that was applied to limit access to the SNMP community. The ACL permits traffic from 192.168.10.3 but it is unclear if this is the correct IP address for the management station.
CDM Playbook
An Exclusive New Playbook for Mobile Operators. https://landing.owmobility.com/5g-cloud-data-management/
Ccnav5.org ccna 4-v50_practice_final_exam
A network administrator is troubleshooting connectivity issues between a router and a non-Cisco device running Frame Relay. The exhibit shows the router configuration. The likely cause of the Layer 2 connectivity problem is that the ietf keyword is missing when enabling Frame Relay on the serial interface. Adding this keyword should repair the connectivity issue.
How to build resilient industrial networks
This document discusses how to build a resilient network through various methods like hardware redundancy, microsegmentation, and configuration backups. It introduces Westermo and defines network resiliency. It describes using hardware redundancy through layer 2 protocols like FRNT rings and layer 3 protocols like OSPF. Microsegmentation is achieved through a hybrid L2/L3 network with firewalls separating different network zones. The importance of configuration backups for maintaining control of network assets is also covered.
HP & NFV POC at SDN World Congree
5 NFV, Network Function Virtualization, proof of concepts with SKT, NTT, KDDI, AT&T, Telefonica and Telenor , with HP, at SDN world congress 2014
Private&publish cloud present
1. The document discusses publishing a cloud on a local service to provide both internet and intranet applications.
2. Key benefits include allowing the server to support both internet and intranet applications, easily scaling server resources as needed, backup and upgrading servers remotely, and monitoring resources from a central location.
3. It provides examples of setting up VMs and networks on a publish cloud, accessing Windows VMs over the internet, installing Linux images, and using co-location, as well as discussing data gateways, user administration, and resource monitoring.
Narrowband-IoT vs Lora
What is the difference between narrowband-IoT vs Lora in LPWAN technology?
The two Narrowband-IoT vs Lora technologies have different technical and commercial characteristics and therefore differ in terms of application scenarios. This article explains the differences between the Narrowband-IoT vs Lora two technologies and explains the application scenarios for which each is suitable.
Here have 6 main differences of Narrowband-IoT vs Lora comparisons.
OSN Bay Area Feb 2019 Meetup: Lumina Networks, Unlocking a digital future
Open source and intent-based networking simplifies and
optimizes heterogeneous networks. With Lumina Networks,
Service Providers have the freedom to take control of their future.
16TB Max file size.pdf
NetApp's All SAN Arrays (ASAs) allow for maximum file sizes of 128TB, compared to 16TB for other FAS and AFF systems running ONTAP. ASAs are all-flash SAN-only solutions based on AFF platforms and available starting with ONTAP 9.7. Documentation for AFF systems can also be used for the corresponding ASA system for cabling and other information.
Our 5 senses can only perceive representation of reality but not the actual r...
Perceived reality exists within space and time, but actual reality is being discovered through quantum physics, though ancient sages in Asia have known it for thousands of years. Quantum theory shows particles can be in different states simultaneously, though humans can only perceive one state at a time as we move through time. Devotees of Indian gurus have demonstrated being in different states at once, documented for years but not widely accepted until quantum physics. Reaching this state requires going beyond the five senses and spending years in realization, as it is not something outside us but a matter of inner realization.
More Related Content
Similar to NDMP backup models
Improving the peering business case with RPKI
This document discusses how RPKI (Resource Public Key Infrastructure) can improve the security and business case for peering. It outlines how RPKI helps protect against hijacking and misconfigurations by validating the origin ASN and prefix length of BGP announcements. For internet exchange points (IXPs), the document recommends that IXP operators create RPKI ROAs (Route Origin Authorizations) for their peering LAN prefixes and configure route servers to reject invalid routes to prevent routing issues on the peering network. Adopting RPKI-based validation makes direct peering and route servers more secure while simplifying operations for network operators.
NETWORKING, COMMUNICATION SYSTEMS AND SCADA
Networking allows computers and devices to communicate and share resources through interconnected communication channels. A network's performance is measured in bits per second. VLANs allow hosts to communicate as if on the same broadcast domain even if not on the same switch. Switches use MAC addresses to forward frames while routers use addresses to determine a packet's destination and direct it accordingly. The proposed network layout for ONGC improves redundancy, controls data flow, reduces load, and serves as a backup in case of failures.
NETWORKING, COMMUNICATION SYSTEMS AND SCADA
Networking allows computers and devices to communicate and share resources through interconnected communication channels. A network's performance is measured in bits per second. VLANs allow hosts to communicate as if on the same broadcast domain even if not on the same switch. Switches use MAC addresses to forward frames while routers use addresses and routing tables to direct packets between networks. The proposed network layout for ONGC improves redundancy, controls data flow, and reduces load compared to the old network.
Openstack meetup: NFV and Openstack
How NFV , Network Function Virtualization for Telecom Networks, works ?
What are the requirements towards Openstack ?
What are the use cases ?
PLNOG 7: Emil Gągała, Sławomir Janukowicz - carrier grade NAT
The document discusses the requirements and experiences of carrier grade NAT (CGN) technology, including what CGN is, how it relates to IETF standards, managing subscriber sessions, flow analysis of subscriber behavior, logging optimization techniques like port block allocation and deterministic NAT, and the evolution of CGN including port forwarding and the new Port Control Protocol (PCP).
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment Bangladesh Network Operators Group
The L2 NID based architecture for vCPE/NFV deployments faces several challenges:
1) It can cause MAC address scale issues in the NFV data center switching infrastructure as thousands of customer MAC addresses may need to be learned.
2) It extends customer layer 2 domains to the NFV data center, increasing security risks from misconfigured customer networks.
3) There is a potential risk of layer 2 loops occurring between customer networks and the service provider infrastructure without proper demarcation and loop prevention.
4) Achieving high availability between redundant vCPE instances requires reliable tracking of the connectivity between the L2 NID and vCPE, which adds complexity.Unit 2
The document discusses several topics related to computer networking:
1. It defines the hidden node problem as occurring when two nodes sending to a common destination are unaware of each other's transmissions, which can cause frame collisions.
2. It describes Bluetooth as a short-range wireless technology used to connect devices like mobile phones and laptops, with advantages like immediate ad-hoc connections without wires and low power consumption.
3. It lists types of connecting devices in internetworking like hubs, repeaters, network interface cards, media converters, and basic switches and bridges.
2016 06-10-ieee-sdn (1)
This document discusses managing multi-layer networks and the challenges of closing the control loop in autonomic networks. It proposes using the Recursive InterNetwork Architecture (RINA) model, which provides a common structure and set of protocols across layers to simplify network management. RINA could reduce costs and downtime compared to the Internet Protocol (IP) model with its many isolated protocols for each layer. The document provides examples of how data center networks and service provider networks could be modeled and managed using RINA.
Brocade Administration & troubleshooting
The document provides information about Brocade SAN switches including their product lines, features, and specifications. It discusses various switch models ranging from 8-port to 384-port configurations supporting 1, 2, 4, 8, and 10Gbps speeds. Features covered include dynamic path selection, ISL trunking, extended fabric, hardware-enforced zoning, advanced performance monitoring, and FCIP tunneling. The document also reviews FOS enhancements, new 10Gbps blades, and concepts like NPIV and NPV.
Shanghai Breakout: Mobile Devices and Wi-Fi
The document discusses several topics related to mobile devices and Wi-Fi, including:
1) The commercial value chain prioritizes cellular operators and consumers over enterprise users, though this is changing.
2) Device models are optimized for single home access points rather than enterprise wireless LANs with multiple access points.
3) Battery life is overly prioritized, limiting probing for better access points and adoption of features like QoS that could improve performance.
Www ccnav5 net_ccna_1_chapter_1_v5_0_exam_answers_2014
This document contains 21 multiple choice questions and answers from the CCNA 1 Chapter 1 v5.0 exam. The questions cover topics like internet connection types, network devices, security goals, and network congestion. Answers are provided for each question about concepts addressed in the CCNA curriculum.
ccna 4 final 2012
The document appears to contain questions and answers from the CCNA 4 final exam. It includes questions about topics like Frame Relay configuration, PPP negotiation failure troubleshooting, ACL usage, VLAN performance testing, VPN technology selection and DHCP address pool configuration issues. The questions cover a wide range of Cisco networking technologies tested on the CCNA 4 certification exam.
Ccna 4 final exam answer v5
R1 is configured to use SNMP version 2 to communicate with a management station at IP address 192.168.1.3. However, the administrator is unable to get any information from R1. The problem is likely due to an issue with the ACL configuration that was applied to limit access to the SNMP community. The ACL permits traffic from 192.168.10.3 but it is unclear if this is the correct IP address for the management station.
CDM Playbook
An Exclusive New Playbook for Mobile Operators. https://landing.owmobility.com/5g-cloud-data-management/
Ccnav5.org ccna 4-v50_practice_final_exam
A network administrator is troubleshooting connectivity issues between a router and a non-Cisco device running Frame Relay. The exhibit shows the router configuration. The likely cause of the Layer 2 connectivity problem is that the ietf keyword is missing when enabling Frame Relay on the serial interface. Adding this keyword should repair the connectivity issue.
How to build resilient industrial networks
This document discusses how to build a resilient network through various methods like hardware redundancy, microsegmentation, and configuration backups. It introduces Westermo and defines network resiliency. It describes using hardware redundancy through layer 2 protocols like FRNT rings and layer 3 protocols like OSPF. Microsegmentation is achieved through a hybrid L2/L3 network with firewalls separating different network zones. The importance of configuration backups for maintaining control of network assets is also covered.
HP & NFV POC at SDN World Congree
5 NFV, Network Function Virtualization, proof of concepts with SKT, NTT, KDDI, AT&T, Telefonica and Telenor , with HP, at SDN world congress 2014
Private&publish cloud present
1. The document discusses publishing a cloud on a local service to provide both internet and intranet applications.
2. Key benefits include allowing the server to support both internet and intranet applications, easily scaling server resources as needed, backup and upgrading servers remotely, and monitoring resources from a central location.
3. It provides examples of setting up VMs and networks on a publish cloud, accessing Windows VMs over the internet, installing Linux images, and using co-location, as well as discussing data gateways, user administration, and resource monitoring.
Narrowband-IoT vs Lora
What is the difference between narrowband-IoT vs Lora in LPWAN technology?
The two Narrowband-IoT vs Lora technologies have different technical and commercial characteristics and therefore differ in terms of application scenarios. This article explains the differences between the Narrowband-IoT vs Lora two technologies and explains the application scenarios for which each is suitable.
Here have 6 main differences of Narrowband-IoT vs Lora comparisons.
OSN Bay Area Feb 2019 Meetup: Lumina Networks, Unlocking a digital future
Open source and intent-based networking simplifies and
optimizes heterogeneous networks. With Lumina Networks,
Service Providers have the freedom to take control of their future.
Similar to NDMP backup models (20)
PLNOG 7: Emil Gągała, Sławomir Janukowicz - carrier grade NAT
PLNOG 7: Emil Gągała, Sławomir Janukowicz - carrier grade NAT
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
Www ccnav5 net_ccna_1_chapter_1_v5_0_exam_answers_2014
Www ccnav5 net_ccna_1_chapter_1_v5_0_exam_answers_2014
OSN Bay Area Feb 2019 Meetup: Lumina Networks, Unlocking a digital future
OSN Bay Area Feb 2019 Meetup: Lumina Networks, Unlocking a digital future
More from Ashwin Pawar
16TB Max file size.pdf
NetApp's All SAN Arrays (ASAs) allow for maximum file sizes of 128TB, compared to 16TB for other FAS and AFF systems running ONTAP. ASAs are all-flash SAN-only solutions based on AFF platforms and available starting with ONTAP 9.7. Documentation for AFF systems can also be used for the corresponding ASA system for cabling and other information.
Our 5 senses can only perceive representation of reality but not the actual r...
Perceived reality exists within space and time, but actual reality is being discovered through quantum physics, though ancient sages in Asia have known it for thousands of years. Quantum theory shows particles can be in different states simultaneously, though humans can only perceive one state at a time as we move through time. Devotees of Indian gurus have demonstrated being in different states at once, documented for years but not widely accepted until quantum physics. Reaching this state requires going beyond the five senses and spending years in realization, as it is not something outside us but a matter of inner realization.
E=C+O
Consciousness is a constant that witnesses events and objects which are variables. One comes to know themselves by understanding what they are not through experiencing events which are a function of consciousness and objects. Experience is defined as consciousness plus an object that is witnessed by the constant of consciousness.
SnapDiff
SnapDiff is NetApp's proprietary indexing engine that identifies file differences between two snapshots. It compares the base and diff snapshots using inode-walk and returns a list of added, deleted, modified, and renamed files. Backup software vendors can integrate their solutions with SnapDiff through its API to perform incremental backups using snapshots. SnapDiff provides faster indexing compared to traditional file system crawlers or NDMP backups by identifying file changes at the inode level rather than performing a full tree walk.
Oracle database might have problems with stale NFSv3 locks upon restart
The document discusses stale NFS locks that can occur upon Oracle database restart with NFSv3. The issue is caused by lockd and rpc.statd using different name resolution methods to create and clear locks, resulting in non-matching host names. The solution is to change the order of host names in /etc/hosts so the same host name is used for lock creation and clearance.
Is it possible to upgrade or revert ontap versions on a Simulator
Is it possible to upgrade or revert ontap versions on a Simulator!
https://www.slideshare.net/AshwinPawar/how-to-upgrade-ontap-simulator
Cannot split clone snapcenter 4.3
The document discusses an error when attempting to perform a SQL backup clone using SnapCenter 4.3 on a NetApp cDOT storage system using iSCSI. The error references SMB even though iSCSI was being used, because the SnapCenter storage connections were using the cluster management LIF instead of the data SVM management LIF, which is required for SAN protocols like iSCSI. The solution is to add the data SVM directly in SnapCenter using the SVM management LIF.
Network port administrative speed does not display correctly on NetApp storage
The document discusses a bug where the administrative speed of network ports on NetApp storage incorrectly displays as 1000 instead of 10000, even though the operational speed is 10000. This bug was fixed in ONTAP version 9.6RC1 and later. The writer observed this same issue on their FAS8200 running ONTAP 9.1, where the administrative speed of ports e0c and e0d both displayed as 1000 although the operational speed was 10000.
How to connect to NetApp FILER micro-USB console port
The document discusses how to connect to the console port of a NetApp Filer using a micro-USB cable and configure Putty serial terminal software. It explains that 115,200 baud rate with N-8-1 refers to transferring up to 115,200 bits per second with no parity, 8 data bits, and 1 stop bit. The steps are to connect the micro-USB cable from the Filer to a laptop, identify the detected COM port in the device manager, open Putty, select the correct COM port and baud rate settings, and click open under the session tab rather than the incorrect arrow shown.
How to use Active IQ tool to access filer information
This document provides instructions for using NetApp's Active IQ tool to access various types of information about a FILER, including cable diagrams, stack diagrams, RAID configuration visualization, hardware capacity headroom, and storage summaries. Users can log into the NetApp support site, enter the FILER name, click on the Configuration button, and select Visualization to view diagrams and other data pulled from the last AutoSupport report. The Active IQ tool extracts valuable information from a FILER's AutoSupport reports with some patience during loading of dynamic visualizations and data.
San vs Nas fun series
A SAN provides block-level storage to clients that they can then use to build their own file systems, similar to a real estate provider giving a plot of land. A NAS provides a complete file system to clients similar to a real estate agent providing a ready-made home, with the NAS appearing as a file server and the SAN appearing as a raw disk to the client operating system. The key difference is that a SAN provides raw disks while a NAS provides a complete file system.
Steps to identify ONTAP latency related issues
The document provides steps to identify and understand latency issues on a NetApp ONTAP system. It analyzes sysstat output showing CPU utilization across various domains. While overall CPU usage is high at 97%, no single domain is fully utilized, indicating CPU is not the root cause of latency. It recommends investigating service level latency for specific LUNs, volumes, or protocols. Using ONTAP QoS commands, it identifies disk latency of 3ms on one aggregate which is within normal limits and not likely the root cause. The aggregate is 89% full which is also not yet concerning given its flash composition.
SnapDiff
SnapDiff is NetApp's proprietary file differencing engine that identifies files changed between snapshots. It compares block-level changes rather than traversing the entire file system, improving backup performance. The SnapDiff API allows backup applications to integrate with SnapDiff. SnapDiff performance is measured in files processed per hour and is impacted by very large or deeply nested directory structures rather than total storage size.
SnapDiff process flow chart
The SnapDiff process flowchart first takes a baseline backup snapshot of a volume. Next, it takes an incremental snapshot once it has the required information. It then begins the SnapDiff process to compare the snapshots and backup changed data.
SnapDiff performance issue
The document discusses troubleshooting a SnapDiff performance issue. Key factors that can affect SnapDiff throughput include hardware resources, Data ONTAP version, disk I/O latency, number of files in volumes, parallel SnapDiff sessions, and overlapping backup jobs. Symptoms of timeouts between ONTAP and the media agent during the indexing phase suggest the indexing is taking too long. The document provides workarounds like skipping cataloging and running it later, and using live browse for restores if needed before investigation is complete.
Volume level restore fails with error transient snapshot copy is not supported
A volume level restore failed with an error message indicating that a transient snapshot was not supported for the operation. The error occurred because the snapshot being used was a temporary one created during a SnapVault transfer where deduplication was enabled, making it an invalid snapshot. To resolve it, ensure the snapshot is a valid Snapmirror base snapshot without special characters in the name.
Disk reports predicted failure event
A predictive failure alert was reported for disk 1c.xx.xx in NetApp cluster node Cluster-02. The disk reported a predicted failure event. If a matching spare disk is available, rapid RAID recovery will begin by copying the data from the pre-failed disk to the spare. If no spares are available, the disk will eventually fail and cause the RAID group to degrade until a spare is available to reconstruct the data. Proactive assignment of a partner node's spare disk is recommended.
OCUM shows ONTAP cluster health degraded
The document discusses a degraded cluster health status shown in OCUM after adding a cDOT ONTAP controller. While the node pairing status was good, the cluster health showed as degraded. This was because OCUM only marks cluster health as OK after subsystem checks return OK, and one subsystem here showed as degraded, causing the overall cluster health to display as degraded. The solution is to ensure the cluster show and system health subsystem show both return OK.
NDMPCOPY lun from 7-mode NetApp to cDOT
The document describes how to copy archived SQL database LUNs from a 7-mode SnapVault snapshot to a cDOT SAN volume using NDMPCOPY in two phases. Phase 1 uses NDMPCOPY to transfer the LUN from the 7-mode snapshot to the cDOT destination volume. Phase 2 presents the copied LUN to the SQL box by mapping, rescaning disks, and bringing the LUN online so the databases can be retrieved.
Latency in storage
This document discusses components that can contribute to latency in an IT infrastructure, with a focus on storage latency. It identifies potential sources of latency including applications, hosts, virtual machines, networks, and storage components. It recommends commands like 'qos statistics volume performance show' and tools like OCUM/OPM to analyze latency across clustered Data ONTAP components and identify bottlenecks. The document aims to help storage administrators troubleshoot latency issues by examining statistics from different parts of the infrastructure to pinpoint the root cause.
More from Ashwin Pawar (20)
Our 5 senses can only perceive representation of reality but not the actual r...
Our 5 senses can only perceive representation of reality but not the actual r...
Oracle database might have problems with stale NFSv3 locks upon restart
Oracle database might have problems with stale NFSv3 locks upon restart
Is it possible to upgrade or revert ontap versions on a Simulator
Is it possible to upgrade or revert ontap versions on a Simulator
Network port administrative speed does not display correctly on NetApp storage
Network port administrative speed does not display correctly on NetApp storage
How to connect to NetApp FILER micro-USB console port
How to connect to NetApp FILER micro-USB console port
How to use Active IQ tool to access filer information
How to use Active IQ tool to access filer information
Volume level restore fails with error transient snapshot copy is not supported
Volume level restore fails with error transient snapshot copy is not supported
Recently uploaded
Project Management Semester Long Project - Acuity
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Recently uploaded (20)
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
NDMP backup models
- 3. IMPORTANT INFORMATION WRT LIF & PORT REQUIREMENT: Whether Node-scoped or SVM-scoped, Intercluster is a preferred NDMP LIF for both control & Data communication. Ensure NDMP Port 10000 is allowed through firewall policy. However, in cases where Data LIFs are the only available option presented to Backup Applications, then Data Connection LIF selection can be very tricky. This is b'cos you cannot hard-code which Data LIF you want to use. This is purely based on the first available Data LIF in the communicating subnet. In other words - The order at which the Data interface is used depends on the order in which the interface appears in the node-run output of 'ifconfig -a'. This is a very well written KB article if you need more info: https://kb.netapp.com/app/answers/answer_view/a_id/1001337 Courtesy: NetApp ashwinwriter@gmail.com Sep, 2019