The SnapDiff process flowchart first takes a baseline backup snapshot of a volume. Next, it takes an incremental snapshot once it has the required information. It then begins the SnapDiff process to compare the snapshots and backup changed data.
NetApp's All SAN Arrays (ASAs) allow for maximum file sizes of 128TB, compared to 16TB for other FAS and AFF systems running ONTAP. ASAs are all-flash SAN-only solutions based on AFF platforms and available starting with ONTAP 9.7. Documentation for AFF systems can also be used for the corresponding ASA system for cabling and other information.
Our 5 senses can only perceive representation of reality but not the actual r...Ashwin Pawar
Perceived reality exists within space and time, but actual reality is being discovered through quantum physics, though ancient sages in Asia have known it for thousands of years. Quantum theory shows particles can be in different states simultaneously, though humans can only perceive one state at a time as we move through time. Devotees of Indian gurus have demonstrated being in different states at once, documented for years but not widely accepted until quantum physics. Reaching this state requires going beyond the five senses and spending years in realization, as it is not something outside us but a matter of inner realization.
Consciousness is a constant that witnesses events and objects which are variables. One comes to know themselves by understanding what they are not through experiencing events which are a function of consciousness and objects. Experience is defined as consciousness plus an object that is witnessed by the constant of consciousness.
SnapDiff is NetApp's proprietary indexing engine that identifies file differences between two snapshots. It compares the base and diff snapshots using inode-walk and returns a list of added, deleted, modified, and renamed files. Backup software vendors can integrate their solutions with SnapDiff through its API to perform incremental backups using snapshots. SnapDiff provides faster indexing compared to traditional file system crawlers or NDMP backups by identifying file changes at the inode level rather than performing a full tree walk.
Oracle database might have problems with stale NFSv3 locks upon restartAshwin Pawar
The document discusses stale NFS locks that can occur upon Oracle database restart with NFSv3. The issue is caused by lockd and rpc.statd using different name resolution methods to create and clear locks, resulting in non-matching host names. The solution is to change the order of host names in /etc/hosts so the same host name is used for lock creation and clearance.
The document discusses an error when attempting to perform a SQL backup clone using SnapCenter 4.3 on a NetApp cDOT storage system using iSCSI. The error references SMB even though iSCSI was being used, because the SnapCenter storage connections were using the cluster management LIF instead of the data SVM management LIF, which is required for SAN protocols like iSCSI. The solution is to add the data SVM directly in SnapCenter using the SVM management LIF.
Network port administrative speed does not display correctly on NetApp storageAshwin Pawar
The document discusses a bug where the administrative speed of network ports on NetApp storage incorrectly displays as 1000 instead of 10000, even though the operational speed is 10000. This bug was fixed in ONTAP version 9.6RC1 and later. The writer observed this same issue on their FAS8200 running ONTAP 9.1, where the administrative speed of ports e0c and e0d both displayed as 1000 although the operational speed was 10000.
NetApp's All SAN Arrays (ASAs) allow for maximum file sizes of 128TB, compared to 16TB for other FAS and AFF systems running ONTAP. ASAs are all-flash SAN-only solutions based on AFF platforms and available starting with ONTAP 9.7. Documentation for AFF systems can also be used for the corresponding ASA system for cabling and other information.
Our 5 senses can only perceive representation of reality but not the actual r...Ashwin Pawar
Perceived reality exists within space and time, but actual reality is being discovered through quantum physics, though ancient sages in Asia have known it for thousands of years. Quantum theory shows particles can be in different states simultaneously, though humans can only perceive one state at a time as we move through time. Devotees of Indian gurus have demonstrated being in different states at once, documented for years but not widely accepted until quantum physics. Reaching this state requires going beyond the five senses and spending years in realization, as it is not something outside us but a matter of inner realization.
Consciousness is a constant that witnesses events and objects which are variables. One comes to know themselves by understanding what they are not through experiencing events which are a function of consciousness and objects. Experience is defined as consciousness plus an object that is witnessed by the constant of consciousness.
SnapDiff is NetApp's proprietary indexing engine that identifies file differences between two snapshots. It compares the base and diff snapshots using inode-walk and returns a list of added, deleted, modified, and renamed files. Backup software vendors can integrate their solutions with SnapDiff through its API to perform incremental backups using snapshots. SnapDiff provides faster indexing compared to traditional file system crawlers or NDMP backups by identifying file changes at the inode level rather than performing a full tree walk.
Oracle database might have problems with stale NFSv3 locks upon restartAshwin Pawar
The document discusses stale NFS locks that can occur upon Oracle database restart with NFSv3. The issue is caused by lockd and rpc.statd using different name resolution methods to create and clear locks, resulting in non-matching host names. The solution is to change the order of host names in /etc/hosts so the same host name is used for lock creation and clearance.
The document discusses an error when attempting to perform a SQL backup clone using SnapCenter 4.3 on a NetApp cDOT storage system using iSCSI. The error references SMB even though iSCSI was being used, because the SnapCenter storage connections were using the cluster management LIF instead of the data SVM management LIF, which is required for SAN protocols like iSCSI. The solution is to add the data SVM directly in SnapCenter using the SVM management LIF.
Network port administrative speed does not display correctly on NetApp storageAshwin Pawar
The document discusses a bug where the administrative speed of network ports on NetApp storage incorrectly displays as 1000 instead of 10000, even though the operational speed is 10000. This bug was fixed in ONTAP version 9.6RC1 and later. The writer observed this same issue on their FAS8200 running ONTAP 9.1, where the administrative speed of ports e0c and e0d both displayed as 1000 although the operational speed was 10000.
How to connect to NetApp FILER micro-USB console portAshwin Pawar
The document discusses how to connect to the console port of a NetApp Filer using a micro-USB cable and configure Putty serial terminal software. It explains that 115,200 baud rate with N-8-1 refers to transferring up to 115,200 bits per second with no parity, 8 data bits, and 1 stop bit. The steps are to connect the micro-USB cable from the Filer to a laptop, identify the detected COM port in the device manager, open Putty, select the correct COM port and baud rate settings, and click open under the session tab rather than the incorrect arrow shown.
Intercluster LIFs are preferred over data LIFs for NDMP control and data communication to ensure firewall access. If only data LIFs can be used, connection depends on the order interfaces appear in ifconfig output, not a hardcoded selection. More details are available at the provided KB article on properly configuring LIFs and firewall policies for NDMP backups.
How to use Active IQ tool to access filer informationAshwin Pawar
This document provides instructions for using NetApp's Active IQ tool to access various types of information about a FILER, including cable diagrams, stack diagrams, RAID configuration visualization, hardware capacity headroom, and storage summaries. Users can log into the NetApp support site, enter the FILER name, click on the Configuration button, and select Visualization to view diagrams and other data pulled from the last AutoSupport report. The Active IQ tool extracts valuable information from a FILER's AutoSupport reports with some patience during loading of dynamic visualizations and data.
A SAN provides block-level storage to clients that they can then use to build their own file systems, similar to a real estate provider giving a plot of land. A NAS provides a complete file system to clients similar to a real estate agent providing a ready-made home, with the NAS appearing as a file server and the SAN appearing as a raw disk to the client operating system. The key difference is that a SAN provides raw disks while a NAS provides a complete file system.
Steps to identify ONTAP latency related issuesAshwin Pawar
The document provides steps to identify and understand latency issues on a NetApp ONTAP system. It analyzes sysstat output showing CPU utilization across various domains. While overall CPU usage is high at 97%, no single domain is fully utilized, indicating CPU is not the root cause of latency. It recommends investigating service level latency for specific LUNs, volumes, or protocols. Using ONTAP QoS commands, it identifies disk latency of 3ms on one aggregate which is within normal limits and not likely the root cause. The aggregate is 89% full which is also not yet concerning given its flash composition.
SnapDiff is NetApp's proprietary file differencing engine that identifies files changed between snapshots. It compares block-level changes rather than traversing the entire file system, improving backup performance. The SnapDiff API allows backup applications to integrate with SnapDiff. SnapDiff performance is measured in files processed per hour and is impacted by very large or deeply nested directory structures rather than total storage size.
The document discusses troubleshooting a SnapDiff performance issue. Key factors that can affect SnapDiff throughput include hardware resources, Data ONTAP version, disk I/O latency, number of files in volumes, parallel SnapDiff sessions, and overlapping backup jobs. Symptoms of timeouts between ONTAP and the media agent during the indexing phase suggest the indexing is taking too long. The document provides workarounds like skipping cataloging and running it later, and using live browse for restores if needed before investigation is complete.
Volume level restore fails with error transient snapshot copy is not supportedAshwin Pawar
A volume level restore failed with an error message indicating that a transient snapshot was not supported for the operation. The error occurred because the snapshot being used was a temporary one created during a SnapVault transfer where deduplication was enabled, making it an invalid snapshot. To resolve it, ensure the snapshot is a valid Snapmirror base snapshot without special characters in the name.
A predictive failure alert was reported for disk 1c.xx.xx in NetApp cluster node Cluster-02. The disk reported a predicted failure event. If a matching spare disk is available, rapid RAID recovery will begin by copying the data from the pre-failed disk to the spare. If no spares are available, the disk will eventually fail and cause the RAID group to degrade until a spare is available to reconstruct the data. Proactive assignment of a partner node's spare disk is recommended.
OCUM shows ONTAP cluster health degradedAshwin Pawar
The document discusses a degraded cluster health status shown in OCUM after adding a cDOT ONTAP controller. While the node pairing status was good, the cluster health showed as degraded. This was because OCUM only marks cluster health as OK after subsystem checks return OK, and one subsystem here showed as degraded, causing the overall cluster health to display as degraded. The solution is to ensure the cluster show and system health subsystem show both return OK.
NDMPCOPY lun from 7-mode NetApp to cDOTAshwin Pawar
The document describes how to copy archived SQL database LUNs from a 7-mode SnapVault snapshot to a cDOT SAN volume using NDMPCOPY in two phases. Phase 1 uses NDMPCOPY to transfer the LUN from the 7-mode snapshot to the cDOT destination volume. Phase 2 presents the copied LUN to the SQL box by mapping, rescaning disks, and bringing the LUN online so the databases can be retrieved.
This document discusses components that can contribute to latency in an IT infrastructure, with a focus on storage latency. It identifies potential sources of latency including applications, hosts, virtual machines, networks, and storage components. It recommends commands like 'qos statistics volume performance show' and tools like OCUM/OPM to analyze latency across clustered Data ONTAP components and identify bottlenecks. The document aims to help storage administrators troubleshoot latency issues by examining statistics from different parts of the infrastructure to pinpoint the root cause.
NVRAM is a separate DIMM from main memory, while NVMEM uses part of the main memory and is not a separate DIMM. The document provides examples of hardware showing NVRAM as a separate 4GB DIMM, while NVMEM on a filer uses 2.4GB of the total 20GB main memory. It clarifies the hardware difference between NVRAM using a separate DIMM and NVMEM utilizing space within main memory.
NFS and SANs can provide block-level access to storage in almost identical ways from the perspective of applications. At the protocol level, block reads over NFS and iSCSI are almost identical - they both request a number of bytes or blocks starting at a given offset. The main difference is that NFS uses file handles to identify blocks while SANs use LUNs, but a LUN and file are just containers for blocks of data. NetApp's WAFL file system allows it to present LUNs as files within aggregates, unifying SAN, NAS, and iSCSI storage into a single appliance by storing data at the block level regardless of protocol. Dave Hitz was instrumental in revolutionizing storage through his work
NetApp provides storage layering that allows organizations to separate data from physical storage infrastructure. This approach helps optimize storage resources and reduces costs by enabling data to be moved seamlessly between different storage technologies like flash, disk, and cloud. Storage layering gives organizations flexibility and freedom of choice in their IT infrastructure investments.
What is storage from client's perspectiveAshwin Pawar
This document defines storage from a client's perspective in 3 simple words: capacity, performance, and service quality. It explains that clients do not care about the technical details of the storage system, but rather care about getting the capacity and performance that was promised in a consistent manner by the service provider. The client's main concerns are how well their applications and databases run using the storage service.
Difference between cluster image package show-repository and system image getAshwin Pawar
How to copy firmware and software on the NetApp cluster without using web/HTTPs or ftp server. Also, find out the difference between cluster image package show-repository and system image get repository.
This information is available on request.
The document summarizes an issue where one node of an HA pair could access the c$ or etc$ shares but the partner node could not. The cause was determined to be a registry setting on the filer's management interface that blocks data traffic, which was turned on for one node but off for the other. The solution is to set this option to 'off' on both nodes to allow access to the shares from either node.
How to generate,collect and upload ocum logsAshwin Pawar
This document provides instructions for generating, collecting, and uploading an On Command Unified Manager (OCUM) support diagnostics bundle. It describes running a supportbundle.bat file on a Windows-based OCUM installation to generate a zip file containing logs and other diagnostic information. It also provides steps for downloading the bundle using WinSCP and uploading it to NetApp support using FTP. The size of the bundle can range from 100 MB to over 8 GB depending on the environment being managed by OCUM.
SnapDrive allows creation of different storage entities like LUNs, filesystems, host volumes, and disk groups. The document provides step-by-step instructions to create a LUN entity using SnapDrive. This involves first creating a LUN on the NetApp filer and then using local volume management tools like LVM to manage the LUN. Commands to create a LUN on the NetApp storage system darfas01 and volume centos_iscsi are shown.
OpenID AuthZEN Interop Read Out - AuthorizationDavid Brossard
During Identiverse 2024 and EIC 2024, members of the OpenID AuthZEN WG got together and demoed their authorization endpoints conforming to the AuthZEN API
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
How to connect to NetApp FILER micro-USB console portAshwin Pawar
The document discusses how to connect to the console port of a NetApp Filer using a micro-USB cable and configure Putty serial terminal software. It explains that 115,200 baud rate with N-8-1 refers to transferring up to 115,200 bits per second with no parity, 8 data bits, and 1 stop bit. The steps are to connect the micro-USB cable from the Filer to a laptop, identify the detected COM port in the device manager, open Putty, select the correct COM port and baud rate settings, and click open under the session tab rather than the incorrect arrow shown.
Intercluster LIFs are preferred over data LIFs for NDMP control and data communication to ensure firewall access. If only data LIFs can be used, connection depends on the order interfaces appear in ifconfig output, not a hardcoded selection. More details are available at the provided KB article on properly configuring LIFs and firewall policies for NDMP backups.
How to use Active IQ tool to access filer informationAshwin Pawar
This document provides instructions for using NetApp's Active IQ tool to access various types of information about a FILER, including cable diagrams, stack diagrams, RAID configuration visualization, hardware capacity headroom, and storage summaries. Users can log into the NetApp support site, enter the FILER name, click on the Configuration button, and select Visualization to view diagrams and other data pulled from the last AutoSupport report. The Active IQ tool extracts valuable information from a FILER's AutoSupport reports with some patience during loading of dynamic visualizations and data.
A SAN provides block-level storage to clients that they can then use to build their own file systems, similar to a real estate provider giving a plot of land. A NAS provides a complete file system to clients similar to a real estate agent providing a ready-made home, with the NAS appearing as a file server and the SAN appearing as a raw disk to the client operating system. The key difference is that a SAN provides raw disks while a NAS provides a complete file system.
Steps to identify ONTAP latency related issuesAshwin Pawar
The document provides steps to identify and understand latency issues on a NetApp ONTAP system. It analyzes sysstat output showing CPU utilization across various domains. While overall CPU usage is high at 97%, no single domain is fully utilized, indicating CPU is not the root cause of latency. It recommends investigating service level latency for specific LUNs, volumes, or protocols. Using ONTAP QoS commands, it identifies disk latency of 3ms on one aggregate which is within normal limits and not likely the root cause. The aggregate is 89% full which is also not yet concerning given its flash composition.
SnapDiff is NetApp's proprietary file differencing engine that identifies files changed between snapshots. It compares block-level changes rather than traversing the entire file system, improving backup performance. The SnapDiff API allows backup applications to integrate with SnapDiff. SnapDiff performance is measured in files processed per hour and is impacted by very large or deeply nested directory structures rather than total storage size.
The document discusses troubleshooting a SnapDiff performance issue. Key factors that can affect SnapDiff throughput include hardware resources, Data ONTAP version, disk I/O latency, number of files in volumes, parallel SnapDiff sessions, and overlapping backup jobs. Symptoms of timeouts between ONTAP and the media agent during the indexing phase suggest the indexing is taking too long. The document provides workarounds like skipping cataloging and running it later, and using live browse for restores if needed before investigation is complete.
Volume level restore fails with error transient snapshot copy is not supportedAshwin Pawar
A volume level restore failed with an error message indicating that a transient snapshot was not supported for the operation. The error occurred because the snapshot being used was a temporary one created during a SnapVault transfer where deduplication was enabled, making it an invalid snapshot. To resolve it, ensure the snapshot is a valid Snapmirror base snapshot without special characters in the name.
A predictive failure alert was reported for disk 1c.xx.xx in NetApp cluster node Cluster-02. The disk reported a predicted failure event. If a matching spare disk is available, rapid RAID recovery will begin by copying the data from the pre-failed disk to the spare. If no spares are available, the disk will eventually fail and cause the RAID group to degrade until a spare is available to reconstruct the data. Proactive assignment of a partner node's spare disk is recommended.
OCUM shows ONTAP cluster health degradedAshwin Pawar
The document discusses a degraded cluster health status shown in OCUM after adding a cDOT ONTAP controller. While the node pairing status was good, the cluster health showed as degraded. This was because OCUM only marks cluster health as OK after subsystem checks return OK, and one subsystem here showed as degraded, causing the overall cluster health to display as degraded. The solution is to ensure the cluster show and system health subsystem show both return OK.
NDMPCOPY lun from 7-mode NetApp to cDOTAshwin Pawar
The document describes how to copy archived SQL database LUNs from a 7-mode SnapVault snapshot to a cDOT SAN volume using NDMPCOPY in two phases. Phase 1 uses NDMPCOPY to transfer the LUN from the 7-mode snapshot to the cDOT destination volume. Phase 2 presents the copied LUN to the SQL box by mapping, rescaning disks, and bringing the LUN online so the databases can be retrieved.
This document discusses components that can contribute to latency in an IT infrastructure, with a focus on storage latency. It identifies potential sources of latency including applications, hosts, virtual machines, networks, and storage components. It recommends commands like 'qos statistics volume performance show' and tools like OCUM/OPM to analyze latency across clustered Data ONTAP components and identify bottlenecks. The document aims to help storage administrators troubleshoot latency issues by examining statistics from different parts of the infrastructure to pinpoint the root cause.
NVRAM is a separate DIMM from main memory, while NVMEM uses part of the main memory and is not a separate DIMM. The document provides examples of hardware showing NVRAM as a separate 4GB DIMM, while NVMEM on a filer uses 2.4GB of the total 20GB main memory. It clarifies the hardware difference between NVRAM using a separate DIMM and NVMEM utilizing space within main memory.
NFS and SANs can provide block-level access to storage in almost identical ways from the perspective of applications. At the protocol level, block reads over NFS and iSCSI are almost identical - they both request a number of bytes or blocks starting at a given offset. The main difference is that NFS uses file handles to identify blocks while SANs use LUNs, but a LUN and file are just containers for blocks of data. NetApp's WAFL file system allows it to present LUNs as files within aggregates, unifying SAN, NAS, and iSCSI storage into a single appliance by storing data at the block level regardless of protocol. Dave Hitz was instrumental in revolutionizing storage through his work
NetApp provides storage layering that allows organizations to separate data from physical storage infrastructure. This approach helps optimize storage resources and reduces costs by enabling data to be moved seamlessly between different storage technologies like flash, disk, and cloud. Storage layering gives organizations flexibility and freedom of choice in their IT infrastructure investments.
What is storage from client's perspectiveAshwin Pawar
This document defines storage from a client's perspective in 3 simple words: capacity, performance, and service quality. It explains that clients do not care about the technical details of the storage system, but rather care about getting the capacity and performance that was promised in a consistent manner by the service provider. The client's main concerns are how well their applications and databases run using the storage service.
Difference between cluster image package show-repository and system image getAshwin Pawar
How to copy firmware and software on the NetApp cluster without using web/HTTPs or ftp server. Also, find out the difference between cluster image package show-repository and system image get repository.
This information is available on request.
The document summarizes an issue where one node of an HA pair could access the c$ or etc$ shares but the partner node could not. The cause was determined to be a registry setting on the filer's management interface that blocks data traffic, which was turned on for one node but off for the other. The solution is to set this option to 'off' on both nodes to allow access to the shares from either node.
How to generate,collect and upload ocum logsAshwin Pawar
This document provides instructions for generating, collecting, and uploading an On Command Unified Manager (OCUM) support diagnostics bundle. It describes running a supportbundle.bat file on a Windows-based OCUM installation to generate a zip file containing logs and other diagnostic information. It also provides steps for downloading the bundle using WinSCP and uploading it to NetApp support using FTP. The size of the bundle can range from 100 MB to over 8 GB depending on the environment being managed by OCUM.
SnapDrive allows creation of different storage entities like LUNs, filesystems, host volumes, and disk groups. The document provides step-by-step instructions to create a LUN entity using SnapDrive. This involves first creating a LUN on the NetApp filer and then using local volume management tools like LVM to manage the LUN. Commands to create a LUN on the NetApp storage system darfas01 and volume centos_iscsi are shown.
OpenID AuthZEN Interop Read Out - AuthorizationDavid Brossard
During Identiverse 2024 and EIC 2024, members of the OpenID AuthZEN WG got together and demoed their authorization endpoints conforming to the AuthZEN API
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
1. SnapDiff Process flow-chart
First: Backup software takes or selects a snapshot of the volume and performs a base-line backup.
Next: Backup software takes or selects a new (incremental) snapshot, once it has all the information
required it beings the SnapDiff process as illustrated below (High-level).
ashwinwriter@gmail.com
June, 2019