Name that network
•Download as DOC, PDF•
0 likes•125 views
A Land Area Network connects devices within a limited local area such as a home or small office. A Wireless Local Area Network connects devices via Wi-Fi within a small geographic location like a home, office, or small group of buildings. A Campus Area Network connects devices within a larger geographic location such as a college campus or military base.
Report
Share
Report
Share
Recommended
Question for merge
Multipath propagation results in radio signals reaching the receiving antenna by two or more paths through atmospheric ducting, ionospheric reflection and refraction, and reflection from objects. This causes constructive and destructive interference and phase shifting of signals. Rayleigh fading occurs when magnitudes of arriving signals have a Rayleigh distribution due to destructive interference. Rician fading occurs when one component dominates, typically line of sight, and the magnitudes have a Rician distribution. Cell splitting improves mobile system efficiency by increasing channel reuse through defining smaller cells between existing cells, increasing capacity.
Chapter1b Hw De Net
The document discusses different types of computer networks including local area networks (LANs), metropolitan area networks, wide area networks, wireless networks, and home networks. It describes two types of local area network topologies: bus and ring. It also mentions that metropolitan area networks can be based on cable TV infrastructure and that wide area networks connect local area networks via subnets. Wireless networks can be used for system interconnection, wireless LANs, and wireless WANs. Home networks can interconnect computers, entertainment devices, telecommunications equipment, appliances, and devices for telemetry like alarms and sensors.
What will 5 g be
5G in a nutshell.What will be 5G .What does it offer.How is it different from other generations.What all technologies are used in it........
Impact of channel in wireless communication
Wireless telecommunications involves the transfer of information between two or more points without a physical connection. It uses forms of energy like radio frequencies to transmit information over various distances, from a few meters to thousands of kilometers. While wireless operations allow for long-range communication without wires, the wireless channel is susceptible to factors like interference, path loss, and fading that restrict reliability and throughput. Adaptation techniques and MIMO can help improve performance but spectrum and interference remain limitations of wireless networks.
Renjihha.m massive mimo in 5 g
This document provides an overview of massive MIMO technology in 5G networks. It begins with an introduction to 5G and a literature review. It then discusses 5G technology, including spectrum deployment, features, architecture and challenges. It also covers MIMO in 4G LTE networks. The main topic of massive MIMO in 5G is then explained, including its construction, operation modes, limitations and the issue of pilot contamination. Applications and the scope of massive MIMO are discussed before concluding with a summary of the key points.
Radio field strength propagation data and pathloss calculation methods in umt...
This document discusses radio signal path loss prediction methods for UMTS networks. It conducted field measurements of signal strength in a UMTS network in Benin City, Nigeria to collect propagation data. It then used this data to calculate path loss and compared the results to several existing path loss prediction models, finding that the Okumura-Hata model provided the closest predictions for the environment studied, showing its suitability for path loss analysis in UMTS networks in urban areas.
Sideband noise mitigation in a co-located network involving CDMA2000 and WCDM...
This document summarizes a study on mitigating sideband noise interference in a co-located network involving CDMA2000 and WCDMA systems. Measurements were taken at a co-located site and an unco-located site. At the co-located site, the CDMA2000 transmitter signal was found to degrade the WCDMA receiver's sensitivity by 1.01 dB and reduce its minimum demodulation C/I ratio by 2.01 dB (a 30% degradation). To address this, the study proposes applying a Butterworth band pass filter to attenuate interfering signals by at least 52 dB as required to prevent degradation of the WCDMA network's performance.
Energy efficiency in massive mimo based 5g networks
The description about siso and mimo system is given followed by An elaborate description about energy efficiency techniques are given.
Recommended
Question for merge
Multipath propagation results in radio signals reaching the receiving antenna by two or more paths through atmospheric ducting, ionospheric reflection and refraction, and reflection from objects. This causes constructive and destructive interference and phase shifting of signals. Rayleigh fading occurs when magnitudes of arriving signals have a Rayleigh distribution due to destructive interference. Rician fading occurs when one component dominates, typically line of sight, and the magnitudes have a Rician distribution. Cell splitting improves mobile system efficiency by increasing channel reuse through defining smaller cells between existing cells, increasing capacity.
Chapter1b Hw De Net
The document discusses different types of computer networks including local area networks (LANs), metropolitan area networks, wide area networks, wireless networks, and home networks. It describes two types of local area network topologies: bus and ring. It also mentions that metropolitan area networks can be based on cable TV infrastructure and that wide area networks connect local area networks via subnets. Wireless networks can be used for system interconnection, wireless LANs, and wireless WANs. Home networks can interconnect computers, entertainment devices, telecommunications equipment, appliances, and devices for telemetry like alarms and sensors.
What will 5 g be
5G in a nutshell.What will be 5G .What does it offer.How is it different from other generations.What all technologies are used in it........
Impact of channel in wireless communication
Wireless telecommunications involves the transfer of information between two or more points without a physical connection. It uses forms of energy like radio frequencies to transmit information over various distances, from a few meters to thousands of kilometers. While wireless operations allow for long-range communication without wires, the wireless channel is susceptible to factors like interference, path loss, and fading that restrict reliability and throughput. Adaptation techniques and MIMO can help improve performance but spectrum and interference remain limitations of wireless networks.
Renjihha.m massive mimo in 5 g
This document provides an overview of massive MIMO technology in 5G networks. It begins with an introduction to 5G and a literature review. It then discusses 5G technology, including spectrum deployment, features, architecture and challenges. It also covers MIMO in 4G LTE networks. The main topic of massive MIMO in 5G is then explained, including its construction, operation modes, limitations and the issue of pilot contamination. Applications and the scope of massive MIMO are discussed before concluding with a summary of the key points.
Radio field strength propagation data and pathloss calculation methods in umt...
This document discusses radio signal path loss prediction methods for UMTS networks. It conducted field measurements of signal strength in a UMTS network in Benin City, Nigeria to collect propagation data. It then used this data to calculate path loss and compared the results to several existing path loss prediction models, finding that the Okumura-Hata model provided the closest predictions for the environment studied, showing its suitability for path loss analysis in UMTS networks in urban areas.
Sideband noise mitigation in a co-located network involving CDMA2000 and WCDM...
This document summarizes a study on mitigating sideband noise interference in a co-located network involving CDMA2000 and WCDMA systems. Measurements were taken at a co-located site and an unco-located site. At the co-located site, the CDMA2000 transmitter signal was found to degrade the WCDMA receiver's sensitivity by 1.01 dB and reduce its minimum demodulation C/I ratio by 2.01 dB (a 30% degradation). To address this, the study proposes applying a Butterworth band pass filter to attenuate interfering signals by at least 52 dB as required to prevent degradation of the WCDMA network's performance.
Energy efficiency in massive mimo based 5g networks
The description about siso and mimo system is given followed by An elaborate description about energy efficiency techniques are given.
Massive MIMO
Massive MIMO is an antenna technology that uses multiple antennas at both the transmitter and receiver to improve spectral and energy efficiency. It allows communication with multiple devices simultaneously, decreasing wait times and dramatically increasing network speeds. The key benefits of massive MIMO are high spectral and energy efficiency, more reliable signals, boosted capacity and coverage, high data rates, and the ability to serve many users simultaneously through beamforming. However, massive MIMO systems require more hardware resources and power while also being more costly than single antenna systems.
Full duplex and mm wave communication
Dr. Varun Kumar's presentation discusses full duplex radio and mm-wave communication. It covers key wireless resources like frequency and bandwidth. Full duplex radio allows bidirectional communication simultaneously, while mm-wave uses high frequencies from 30-300GHz for short-range, high-bandwidth applications. Challenges include interference and path loss, but mm-wave offers benefits like security and potential multi-gigabit speeds for 5G networks through massive MIMO and beamforming.
Massive MIMO: Opportunities & Challenges
An overview of Massive MIMO technology and it's scope for the next generations of wireless communications. Presented at a seminar in Ulm University in the department of Communications Engineering.
2013-2014 IEEE PROJECTS IN COMMUNICATION
IEEE PROJECTS IN ALL DOMAIS(JAVA , DOTNET, VLSI, MATLAB, ANDROID, NS2, EMBEDDED SYSTEMS, APPLICATION PROJECTS, POWER ELECTRONICS AND POWER SYSTEMS)
Wll implant training
This document discusses various topics related to wireless communication including:
1. The electromagnetic spectrum and different frequency ranges including radio, microwave, infrared, visible light, UV rays, X-rays, and gamma rays.
2. Antenna basics and properties of EM waves such as carrying energy and momentum, propagating through oscillating electric and magnetic fields, and traveling at the speed of light.
3. Examples of radio communication services including AM/FM, walkie-talkies, GSM, WiFi, satellites, and wireless local loop technologies.
4. Multiple access techniques for wireless networks such as TDMA, FDMA, and CDMA are discussed along with CDMA evolution and differences between GSM
CAF II Case Study
Two exchanges in East Central Minnesota were studied to analyze the impact of CAF II funding. Both CenturyLink and Frontier deployed fiber to the node technology using CAF II dollars to support DSL services. However, even after this investment, over 90% of properties in the exchanges are more than 3,000 feet from a node, limiting speeds to less than 25 Mbps download/3 Mbps upload. It is unlikely that rural customers in these exchanges will be able to achieve speeds of 100 Mbps download/20 Mbps upload by 2026 without further investment.
UNLICENSED SPECTRA FUSION AND INTERFERENCE COORDINATION FOR LTE SYSTEMS
TO GET THIS PROJECT COMPLETE SOURCE ON SUPPORT WITH EXECUTION PLEASE CALL BELOW CONTACT DETAILS
MOBILE: 9791938249, 0413-2211159, WEB: WWW.NEXGENPROJECT.COM,WWW.FINALYEAR-IEEEPROJECTS.COM, EMAIL:Praveen@nexgenproject.com
NEXGEN TECHNOLOGY provides total software solutions to its customers. Apsys works closely with the customers to identify their business processes for computerization and help them implement state-of-the-art solutions. By identifying and enhancing their processes through information technology solutions. NEXGEN TECHNOLOGY help it customers optimally use their resources.
Millimeter wave channel modelıng via generatıve neural network ppt
Introduction of Millimeter Wave Channel Modelıng
Millimeter Wave frequencies often refer to the frequency range from 30GHz to 300GHz.
Such frequencıes are desıgnated as extremely hıgh frequency (EHF) band.
The wavelength of which ıs between 10mm to 1mm.
Week1 introduction to wireless communication
this slide will describe a short history of electromagnetic wave. How we use it. And common type of wireless communication around us.
Then, why security is so important to use when we use wireless to communicate
Radio communication and the mobile phone
Radio communication was pioneered by Marconi in 1895 and led to the development of mobile phones over a century later. The document discusses how radio waves are used to transmit information via modulation of electromagnetic carrier waves between mobile phones and cellular towers. It explains how amplitude modulation works and how mobile networks divide coverage into cells served by base stations to allow handoff between areas as users move around.
CDMA AND GSM
WLL-WIRELESS IN LOCAL LOOP_FIXED WIRELESS SERVICE TO PROVIDE PRIMARY ACCESS TO THE TELEPHONE NETWORK BY REPLACING THE COPPER LOOP WITH RADIO FREQUENCY LOOP, MAINTAINING EXISTING TELEPHONE SERVICES. CDMA IS THE MOST POPULAR WAY OF ACCESSING THE WLL SYSTEM, USING SPREAD SPECTRUM TECHNOLOGY TO ALLOW SIMULTANEOUS COMMUNICATION THROUGH THE SAME RADIO CHANNEL BY ASSIGNING UNIQUE DIGITAL CODES. THE KEY COMPONENTS OF A WLL SYSTEM ARE THE BSC, BTS, OMC, MOBILE SET AND FIXED W
Radio communication and the mobile phone
Radio waves are used for communication technologies like television and mobile phones. They have a frequency range between 30KHz and 300 GHz and are split into different bands for various uses. A mobile phone network works by sending voice signals via radio waves from the phone to a base station cell tower, which relays the response back to the phone on a different frequency, with cells overlapping to ensure coverage as the user moves between cells.
Spectrum Allocation in India Monkey on a Greased Pole?
Spectrum allocation in India has been an administrative process rather than market-driven, leading to inefficiencies. There is a scarcity of spectrum that limits expansion of essential telecom services. While Pakistan has allocated spectrum efficiently, India's allocation of 2G and 3G spectrum has faced issues like delays, fragmentation of ownership, and under-utilization. Going forward, India needs to move towards a market-driven approach, allow trading of unused spectrum, and reform policies and institutions for managing spectrum to promote commercial use.
Discussion on Support Long Range Cell Operation for ProSe (S1-141009)
In TR 23703, it mentions that we have to handle out of network coverage scenarios for proximity direct communication in rural area. Therefore, long-range cell is proposed to reduce network converge holes, and thus the phenomenon can be significantly mitigated especially in the rural area.
Although, for receivers located in the fringe areas outside the coverage contour can only receive outbound communication, those UEs can still obtain synchronization signal, system information block, and semi-persistent resource management information for establishing direct communication.
In TR 23703, it mentions that we have to handle out of network coverage scenarios for proximity direct communication in rural area. Therefore, long-range cell is proposed to reduce network converge holes, and thus the phenomenon can be significantly mitigated especially in the rural area.
Although, for receivers located in the fringe areas outside the coverage contour can only receive outbound communication, those UEs can still obtain synchronization signal, system information block, and semi-persistent resource management information for establishing direct communication.
Introduction wireless communication network
The document provides an overview of wireless communications and networks. It discusses the history of wireless technologies and how digital communications provide noise immunity over analog signals. It also describes the basic components of a communication system including the transmitter, channel, and receiver. Additionally, it defines key terms related to wireless systems such as mobile station, base station, and handoff. The document outlines some examples of wireless communication systems and highlights challenges in wireless communications compared to wired systems.
Cfhb annex 24 rapid public communication - civil information assessment-vers0.1
This document provides a template for assessing rapid public communication and civil information in a municipality or village. The template includes sections to gather information on telephone services, telegraph services, radio broadcast, television broadcast, two-way communication systems, postal services, periodicals, printers and publishing facilities, and public address systems. Recommendations are also requested.
Robert Horvitz's Presentation at Emerging Communication Conference & Awards 2...
The document discusses the growing demand for wireless bandwidth and spectrum due to increasing video usage and the proliferation of digital screens. It notes that Cisco forecasts that global IP traffic will increase fivefold by 2013, with video accounting for 91% of traffic. However, providing high quality video on demand for everyone on Earth would require significantly more bandwidth than currently exists or is economically feasible based on current trends. The document thus frames this as a looming spectrum crisis and discusses potential technological solutions such as using higher frequency bands and more advanced signal processing and spectrum sharing techniques.
Laser Broadband By Sumita Giri
The document discusses laser broadband technology from NASA. It begins with an introduction to lasers and broadband internet. NASA's role is to demonstrate laser communication relay in space, which could increase data rates 100x over traditional radio frequency. This laser broadband technology is needed to provide high-speed internet access and lower the costs of commercial satellite communication. It works by transmitting laser pulses through fiber optic cables. Future uses include faster wireless communication and mobile data downloads. Some advantages are high speeds up to 20x faster and lower energy use, though a laser modem would need to be synced each time.
Radio Communication and the Mobile Phone
Radio waves are used to transmit signals between mobile phones and base stations. Mobile phones operate within specific frequency ranges, such as 872-960MHz and 1710-1875MHz. When a call is made, the mobile phone sends and receives radio signals from the nearest base station. Base stations are connected to each other and route calls as the user moves between different cellular areas covered by base stations. The size of each cellular area depends on terrain, frequency band, and call capacity needs in the area.
BBPF Technique for Transmitter Noise Reduction in a Site-Shared Wireless Netw...
The document discusses transmitter noise reduction in a site-shared wireless network using CDMA2000 and WCDMA networks. It introduces using a digital Butterworth band pass filter (BBPF) technique to attenuate transmitter noise from the CDMA2000 downlink frequency affecting the WCDMA uplink frequency. Measurements showed the CDMA2000 downlink overlapping the WCDMA uplink band by 20MHz, interfering in a co-located setting. The BBPF achieved 52dB rejection at a 5MHz guard band offset, attenuating undesired signals. Noise cancellation performance criteria evaluated the BBPF, obtaining low amplitude imbalance, phase error and time delay mismatch within specifications.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
More Related Content
What's hot
Massive MIMO
Massive MIMO is an antenna technology that uses multiple antennas at both the transmitter and receiver to improve spectral and energy efficiency. It allows communication with multiple devices simultaneously, decreasing wait times and dramatically increasing network speeds. The key benefits of massive MIMO are high spectral and energy efficiency, more reliable signals, boosted capacity and coverage, high data rates, and the ability to serve many users simultaneously through beamforming. However, massive MIMO systems require more hardware resources and power while also being more costly than single antenna systems.
Full duplex and mm wave communication
Dr. Varun Kumar's presentation discusses full duplex radio and mm-wave communication. It covers key wireless resources like frequency and bandwidth. Full duplex radio allows bidirectional communication simultaneously, while mm-wave uses high frequencies from 30-300GHz for short-range, high-bandwidth applications. Challenges include interference and path loss, but mm-wave offers benefits like security and potential multi-gigabit speeds for 5G networks through massive MIMO and beamforming.
Massive MIMO: Opportunities & Challenges
An overview of Massive MIMO technology and it's scope for the next generations of wireless communications. Presented at a seminar in Ulm University in the department of Communications Engineering.
2013-2014 IEEE PROJECTS IN COMMUNICATION
IEEE PROJECTS IN ALL DOMAIS(JAVA , DOTNET, VLSI, MATLAB, ANDROID, NS2, EMBEDDED SYSTEMS, APPLICATION PROJECTS, POWER ELECTRONICS AND POWER SYSTEMS)
Wll implant training
This document discusses various topics related to wireless communication including:
1. The electromagnetic spectrum and different frequency ranges including radio, microwave, infrared, visible light, UV rays, X-rays, and gamma rays.
2. Antenna basics and properties of EM waves such as carrying energy and momentum, propagating through oscillating electric and magnetic fields, and traveling at the speed of light.
3. Examples of radio communication services including AM/FM, walkie-talkies, GSM, WiFi, satellites, and wireless local loop technologies.
4. Multiple access techniques for wireless networks such as TDMA, FDMA, and CDMA are discussed along with CDMA evolution and differences between GSM
CAF II Case Study
Two exchanges in East Central Minnesota were studied to analyze the impact of CAF II funding. Both CenturyLink and Frontier deployed fiber to the node technology using CAF II dollars to support DSL services. However, even after this investment, over 90% of properties in the exchanges are more than 3,000 feet from a node, limiting speeds to less than 25 Mbps download/3 Mbps upload. It is unlikely that rural customers in these exchanges will be able to achieve speeds of 100 Mbps download/20 Mbps upload by 2026 without further investment.
UNLICENSED SPECTRA FUSION AND INTERFERENCE COORDINATION FOR LTE SYSTEMS
TO GET THIS PROJECT COMPLETE SOURCE ON SUPPORT WITH EXECUTION PLEASE CALL BELOW CONTACT DETAILS
MOBILE: 9791938249, 0413-2211159, WEB: WWW.NEXGENPROJECT.COM,WWW.FINALYEAR-IEEEPROJECTS.COM, EMAIL:Praveen@nexgenproject.com
NEXGEN TECHNOLOGY provides total software solutions to its customers. Apsys works closely with the customers to identify their business processes for computerization and help them implement state-of-the-art solutions. By identifying and enhancing their processes through information technology solutions. NEXGEN TECHNOLOGY help it customers optimally use their resources.
Millimeter wave channel modelıng via generatıve neural network ppt
Introduction of Millimeter Wave Channel Modelıng
Millimeter Wave frequencies often refer to the frequency range from 30GHz to 300GHz.
Such frequencıes are desıgnated as extremely hıgh frequency (EHF) band.
The wavelength of which ıs between 10mm to 1mm.
Week1 introduction to wireless communication
this slide will describe a short history of electromagnetic wave. How we use it. And common type of wireless communication around us.
Then, why security is so important to use when we use wireless to communicate
Radio communication and the mobile phone
Radio communication was pioneered by Marconi in 1895 and led to the development of mobile phones over a century later. The document discusses how radio waves are used to transmit information via modulation of electromagnetic carrier waves between mobile phones and cellular towers. It explains how amplitude modulation works and how mobile networks divide coverage into cells served by base stations to allow handoff between areas as users move around.
CDMA AND GSM
WLL-WIRELESS IN LOCAL LOOP_FIXED WIRELESS SERVICE TO PROVIDE PRIMARY ACCESS TO THE TELEPHONE NETWORK BY REPLACING THE COPPER LOOP WITH RADIO FREQUENCY LOOP, MAINTAINING EXISTING TELEPHONE SERVICES. CDMA IS THE MOST POPULAR WAY OF ACCESSING THE WLL SYSTEM, USING SPREAD SPECTRUM TECHNOLOGY TO ALLOW SIMULTANEOUS COMMUNICATION THROUGH THE SAME RADIO CHANNEL BY ASSIGNING UNIQUE DIGITAL CODES. THE KEY COMPONENTS OF A WLL SYSTEM ARE THE BSC, BTS, OMC, MOBILE SET AND FIXED W
Radio communication and the mobile phone
Radio waves are used for communication technologies like television and mobile phones. They have a frequency range between 30KHz and 300 GHz and are split into different bands for various uses. A mobile phone network works by sending voice signals via radio waves from the phone to a base station cell tower, which relays the response back to the phone on a different frequency, with cells overlapping to ensure coverage as the user moves between cells.
Spectrum Allocation in India Monkey on a Greased Pole?
Spectrum allocation in India has been an administrative process rather than market-driven, leading to inefficiencies. There is a scarcity of spectrum that limits expansion of essential telecom services. While Pakistan has allocated spectrum efficiently, India's allocation of 2G and 3G spectrum has faced issues like delays, fragmentation of ownership, and under-utilization. Going forward, India needs to move towards a market-driven approach, allow trading of unused spectrum, and reform policies and institutions for managing spectrum to promote commercial use.
Discussion on Support Long Range Cell Operation for ProSe (S1-141009)
In TR 23703, it mentions that we have to handle out of network coverage scenarios for proximity direct communication in rural area. Therefore, long-range cell is proposed to reduce network converge holes, and thus the phenomenon can be significantly mitigated especially in the rural area.
Although, for receivers located in the fringe areas outside the coverage contour can only receive outbound communication, those UEs can still obtain synchronization signal, system information block, and semi-persistent resource management information for establishing direct communication.
In TR 23703, it mentions that we have to handle out of network coverage scenarios for proximity direct communication in rural area. Therefore, long-range cell is proposed to reduce network converge holes, and thus the phenomenon can be significantly mitigated especially in the rural area.
Although, for receivers located in the fringe areas outside the coverage contour can only receive outbound communication, those UEs can still obtain synchronization signal, system information block, and semi-persistent resource management information for establishing direct communication.
Introduction wireless communication network
The document provides an overview of wireless communications and networks. It discusses the history of wireless technologies and how digital communications provide noise immunity over analog signals. It also describes the basic components of a communication system including the transmitter, channel, and receiver. Additionally, it defines key terms related to wireless systems such as mobile station, base station, and handoff. The document outlines some examples of wireless communication systems and highlights challenges in wireless communications compared to wired systems.
Cfhb annex 24 rapid public communication - civil information assessment-vers0.1
This document provides a template for assessing rapid public communication and civil information in a municipality or village. The template includes sections to gather information on telephone services, telegraph services, radio broadcast, television broadcast, two-way communication systems, postal services, periodicals, printers and publishing facilities, and public address systems. Recommendations are also requested.
Robert Horvitz's Presentation at Emerging Communication Conference & Awards 2...
The document discusses the growing demand for wireless bandwidth and spectrum due to increasing video usage and the proliferation of digital screens. It notes that Cisco forecasts that global IP traffic will increase fivefold by 2013, with video accounting for 91% of traffic. However, providing high quality video on demand for everyone on Earth would require significantly more bandwidth than currently exists or is economically feasible based on current trends. The document thus frames this as a looming spectrum crisis and discusses potential technological solutions such as using higher frequency bands and more advanced signal processing and spectrum sharing techniques.
Laser Broadband By Sumita Giri
The document discusses laser broadband technology from NASA. It begins with an introduction to lasers and broadband internet. NASA's role is to demonstrate laser communication relay in space, which could increase data rates 100x over traditional radio frequency. This laser broadband technology is needed to provide high-speed internet access and lower the costs of commercial satellite communication. It works by transmitting laser pulses through fiber optic cables. Future uses include faster wireless communication and mobile data downloads. Some advantages are high speeds up to 20x faster and lower energy use, though a laser modem would need to be synced each time.
Radio Communication and the Mobile Phone
Radio waves are used to transmit signals between mobile phones and base stations. Mobile phones operate within specific frequency ranges, such as 872-960MHz and 1710-1875MHz. When a call is made, the mobile phone sends and receives radio signals from the nearest base station. Base stations are connected to each other and route calls as the user moves between different cellular areas covered by base stations. The size of each cellular area depends on terrain, frequency band, and call capacity needs in the area.
BBPF Technique for Transmitter Noise Reduction in a Site-Shared Wireless Netw...
The document discusses transmitter noise reduction in a site-shared wireless network using CDMA2000 and WCDMA networks. It introduces using a digital Butterworth band pass filter (BBPF) technique to attenuate transmitter noise from the CDMA2000 downlink frequency affecting the WCDMA uplink frequency. Measurements showed the CDMA2000 downlink overlapping the WCDMA uplink band by 20MHz, interfering in a co-located setting. The BBPF achieved 52dB rejection at a 5MHz guard band offset, attenuating undesired signals. Noise cancellation performance criteria evaluated the BBPF, obtaining low amplitude imbalance, phase error and time delay mismatch within specifications.
What's hot (20)
UNLICENSED SPECTRA FUSION AND INTERFERENCE COORDINATION FOR LTE SYSTEMS
UNLICENSED SPECTRA FUSION AND INTERFERENCE COORDINATION FOR LTE SYSTEMS
Millimeter wave channel modelıng via generatıve neural network ppt
Millimeter wave channel modelıng via generatıve neural network ppt
Spectrum Allocation in India Monkey on a Greased Pole?
Spectrum Allocation in India Monkey on a Greased Pole?
Discussion on Support Long Range Cell Operation for ProSe (S1-141009)
Discussion on Support Long Range Cell Operation for ProSe (S1-141009)
Cfhb annex 24 rapid public communication - civil information assessment-vers0.1
Cfhb annex 24 rapid public communication - civil information assessment-vers0.1
Robert Horvitz's Presentation at Emerging Communication Conference & Awards 2...
Robert Horvitz's Presentation at Emerging Communication Conference & Awards 2...
BBPF Technique for Transmitter Noise Reduction in a Site-Shared Wireless Netw...
BBPF Technique for Transmitter Noise Reduction in a Site-Shared Wireless Netw...
Recently uploaded
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Recently uploaded (20)
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Name that network
- 1. Name that Network Land Area Network Wireless Local Area Network Campus Area NetworkMetropolitan Area Network