This document contains the resume of Mohamed Ahmed Medhat Taha. It includes his contact information, objectives, career-related training and certifications, language proficiency, previous jobs, on-site experience working on various projects as a quality control and inspection engineer, skills, education, graduation project details, extracurricular activities, and personal details.
Resume of jaison varkey QA/QC Inspector welding,coatingjaison varkey
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
Resume of jaison varkey QA/QC Inspector welding,coatingjaison varkey
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
A highly motivated and imaginative of Independent inspector with over than 7 Years experiences in fabrication/ vendor inspection of Oil & Gas equipment at Various of Country for Vessel ( Filter, Separator, Coalescor etc), coulomb, heat exchanger, tank, air cooler, metering skid & piping package, structure and valve
Seeking for On-Call/long term contract job of inspection in Mechanical, welding or quality control inspection as current position is Freelance Inspector and had good knowledge, Experiences in Vendor and Welding Inspection.
My Keynote speech slides to the Portfolio Bootcamp participants. These were graphic design students looking for advice on how to prepare for their careers in graphic and web design.
A highly motivated and imaginative of Independent inspector with over than 7 Years experiences in fabrication/ vendor inspection of Oil & Gas equipment at Various of Country for Vessel ( Filter, Separator, Coalescor etc), coulomb, heat exchanger, tank, air cooler, metering skid & piping package, structure and valve
Seeking for On-Call/long term contract job of inspection in Mechanical, welding or quality control inspection as current position is Freelance Inspector and had good knowledge, Experiences in Vendor and Welding Inspection.
My Keynote speech slides to the Portfolio Bootcamp participants. These were graphic design students looking for advice on how to prepare for their careers in graphic and web design.
1. Mohamed Ahmed Medhat
Taha
178 seventh neighborhood third neighboring
El Sheikh Zayed Giza/Egypt
Cell Phone: (002) 0100-5434697
E-mail: Mido.medhat@gmail.com
Objectives:
Seeking acceptance in working in a multinational company which enables me
to give creative ideas.
I am willing to give total support to the organization I'll be working in, with the
experience, capability and skills that I have, in order to achieve organizational
goals and create mutual benefits using the following keys of success:
1. Integrity & Ethics
2. Challenge & Creativity
3. Leadership
4. Teamwork
5. Training
6. Recognition
7. Communication
8. Continuous Improvement
Career-Related Training And Certificates:
International Welding Engineer Diploma certificate No IWE AT 0706
API 570 Inspector certification no. (50307)
API 580 Professional certification no. (52712)
API 653 Inspector certification no. (58052)
API 510 Inspector certification no. (61249)
NDT Level (II) inspector in Radiographic Testing ( RT )
NDT Level (II) inspector in Liquid Penetrant Testing ( PT )
NDT Level (II) inspector in Magnetic Testing ( MT )
NDT Level (II) inspector in visual testing (VT)
Language Proficiency:
Arabic as a native language.
Excellent English spoken and written (second language).
2. Previous jobs filled:
Quality control Engineer at NSF (National Steel Fabrication).Period (July
2009-September 2009)
Senior Inspection engineer at EMC (Egyptian Maintenance Company) through
the period (September 2009-on going)
On site experience:
-Project: GASCO WDGC (onshore gas plant)
-Owner: EGAS
-Project description: In-service inspection of piping systems and static equipment
-Position: Inspection Engineer
-Activities: include but not limited to the following
Full site in-service inspection and testing
Inspection plans
NDT application and supervision
Shutdown activities (plans, UT, PT, MT, Hammer testing, Hydrostatic testing and
repair procedures)
Corrosion rate and remaining life calculations
Fitness for service and failure analysis
-Project: PETROSILAH (Merlon)
-Project description: New fabrication of two 10,000 barrels oil storage tanks
-Position: QC Engineer
-Activities: include but not limited to the following
QC for fabrication of 2 10000 barrels oil storage tank
Fit up, dimension, welding and testing
RT planning according to code and interpretation
Hydrostatic testing
PT, VT, Vacuum box
Reviewing WPS,PQR welders testing and qualifying
-Project: RASHPETCO
-Owner: BG/Rashid Petroleum Company
-Project description: Inspection of piping systems and static equipment
-Position: Inspection Engineer
-Activities: Include but not limited to the following
Inservice inspection for plant pipelines and remaining life calculations.
PT, VT, MT, UT.
3. -Project: BABETCO
-Owner: Shell/Badr El Deen Petroleum Company
-Project description: New fabrication of a fixed roof oil storage tank
-Position: QC Engineer
-Activities: Include but not limited to the following
QC for fabrication of fixed roof oil storage tank
fitup, dimention, welding and testing
RT planning according to code and interpretation
Hydrostatic testing
PT, VT, Vacuum box
Reviewing WPS,PQR welders testing and qualifying
- Project: PETROBEL
-Owner: Eni/Belaiem Petroleum Company
-Project description: Inspection of Mediterranean Platforms
-Position: Inspection Team Leader/RBI Engineer
-Activities: Include but not limited to the following
Leading an inspection team that supplies full inspection services
Real time testing for the newly applied RBI system
Carry out all the inspection work in the plant, prepare execution plan to rectify these
anomalies, solve the problems of the plant (anomalies) and supervise the rectification
actions.
Preparing and executing the “Anomaly management system”
Determine credible damage mechanisms according to API 571
Determine POF, COF, according to API 581.
Prepare inspection plan according to risk level.
Revise current inspection plans in accordance with RBI results.
Using RBI software after testing and startup.
Carry out base line survey.
Prepare RBI Reassessment reports.
Planning and inspection of 22 Mediterranean offshore platforms
Shutdown activities (planning, NDT, Repair Procedures)
New fabrication and repair procedures and welding
Isometric drawing of all piping systems onshore and offshore
4. Project: HAMMAR IPF (Iraq)
-Owner: Eni/WEATHERFORD
-Project description: Plant pipeline fabrication and erection
-Position: QC Engineer
-Activities: Include but not limited to the following
Material verification
Drawings and erection verification
Fitup checking
Testing welds
RT films reviewing
Repair management if needed
Reporting visual inspection and Fitup
Holding meetings with Weatherford
- Project: PETROBEL
-Owner: Eni/Belaiem Petroleum Company
-Project description: Oil storage tank with washing system fabrication
-Position: QC Engineer
-Activities: Include but not limited to the following
Material verification
Drawings and erection verification
Fitup checking
Testing welds
RT maping and selection
RT films reviewing
Repair management if needed
Reporting visual inspection, Fitup, banding, plumpness, peaking and roundness checks
Holding meetings with Petrobel
design and calculations checks
- Project: EMC
-Owner: EMC
-Project description: RBI software development
-Position: RBI Engineer
-Activities: Include but not limited to the following
Testing and revising EMC RBI system.
5. Establishing targets for the capability and coverage of the RBI software.
Revising calculations and correcting potential faults.
Adding and removing fields according to targets set.
Comparing capabilities to API 581 recommendations.
Widening the range of system coverage according to customers’ needs.
Building PRD module from scratch.
Reinstating damage mechanisms and their attached calculations and mitigation.
-Project: PHPC
-Owner: BP/Pharonic company
-Project description: Technical support to PHPCO
-Position: Senior Integrity Engineer
-Activities: Include but not limited to the following
Anomaly management system.
Maximo W.O. View/implement and close on the system.
Integrity data base.
Static equipment inspection and supervising contractor team.
Enhancing and implementing Inspection plan.
Cold repair supervision.
FFS register.
Communication with all departments accordingly.
Skills:
General:
Ambitious
Team player
Fast learner
Dedicated
Self-motivated
Others:
Microsoft Office (Word, Power Point, Excel).
Windows/Linux user.
Internet and searching skills.
Education:
Bachelor in Metallurgy, Faculty of Engineering-Cairo University (2008).
Graduated in Dar El Tarbeya Language School.(2000-2001) Grade: 96.7%
Graduation Project:
6. WELDING PROCEDURE OF DUPLEX ST. ST*:.
Under Supervision of Prof.Dr.M.Raafat El-Koussy.
&Dr.Nahid A.Abdel Raheem.
HAZ simulation
Ferrite content
Chemical analysis& micro structure
Mechanical testing [hardness,impact,tension,face bend, and root
bend.[
*Topics Related to the Project
WPS & PQR.
Material selection.
Problems of stainless steels
Extracurricular Activities:
12 years practice and member of the lead Gymnastics team at Shooting Club.
Member of the National Team, which attended the world wide Gymnastrada
Championship (summer 1999).
Practiced swimming and air pistol shooting.
Enjoy swimming, reading, running, working out and traveling.
First aid course at the red crescent.
Personal Details:
Birth Date : 28/09/1984
Marital State : Married
Nationality : Egyptian
Religion: Muslim
Military service: Exempted
Certificates:
Furnished upon request.
7. WELDING PROCEDURE OF DUPLEX ST. ST*:.
Under Supervision of Prof.Dr.M.Raafat El-Koussy.
&Dr.Nahid A.Abdel Raheem.
HAZ simulation
Ferrite content
Chemical analysis& micro structure
Mechanical testing [hardness,impact,tension,face bend, and root
bend.[
*Topics Related to the Project
WPS & PQR.
Material selection.
Problems of stainless steels
Extracurricular Activities:
12 years practice and member of the lead Gymnastics team at Shooting Club.
Member of the National Team, which attended the world wide Gymnastrada
Championship (summer 1999).
Practiced swimming and air pistol shooting.
Enjoy swimming, reading, running, working out and traveling.
First aid course at the red crescent.
Personal Details:
Birth Date : 28/09/1984
Marital State : Married
Nationality : Egyptian
Religion: Muslim
Military service: Exempted
Certificates:
Furnished upon request.