Microfuge Centrifuge
•
0 likes•40 views
This range of are used for low volume centrifuging applications. The unit is provided with stepless speed control, speed indicator and timer.
Report
Share
Report
Share
Download to read offline
Recommended
Microfuge Centrifuge by ACMAS Technologies Pvt Ltd.
We are microfuge centrifuge suppliers, microfuge manufacturers India, microfuge centrifuge exporters, laboratory centrifuge microfuge and exporters of other hospital and laboratory equipments from India. For More Information Please Logon http://cutt.us/21jJ
35 m hz frequency counter
This document describes a 35MHz frequency counter that uses a PIC16F628A microcontroller and 16x1 LCD display. The frequency counter can measure frequencies up to 35MHz with 150mV sensitivity. It has features like two gate time settings, 10Hz resolution, 9 offset channels, and USB/LSB display modes. The circuit contains mainly passive components like resistors, capacitors, and an inductor.
frequency counter
The document describes a VHF 80MHz-160MHz frequency counter. It uses an LC7265 and LB3500 prescaler to measure frequencies within this range with a resolution of 50 kHz. It can handle input voltages between 100mV to 600mV RMS and supports several common FM intermediate frequencies between +10.7 MHz and -10.65 MHz. The circuit diagram and component list are provided.
Arc900 v1.1.8en
The ARC900 series paperless recorder has multi-channel data logging capabilities with high accuracy. It can record input signals from up to 16 channels, display data on a 5.6" LCD screen, and store recorded data on USB/SD memory cards. Key features include high accuracy of +/-0.15% of reading, relay and 4-20mA outputs, and data storage for over 789 years with optional memory cards.
Insertion Paddle Wheel type Flow Totalizer series 282
Digital flow rate Indicator with Totalizer with Relay/Batcher/Pulser (Models : P-282 & F-282)
Type of sensor : Insertion Paddle Wheel type Flow Rate Indicator with Totalizer
Max. % of Solids : 1 % of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length
Mounting : Field or, Panel
Pipe Line size : min. 15 mm up to 500 mm
Pressure drop : Less than 0.1 bar
Pulses : 4 Pulses each rotation
Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s
Repeatability : +/- 0.5%
Enclosure : Weather proof IP 65
Gland : PO7
Fitting material : ABS, SS304 or, SS316
Fitting Type : Threaded, Flanged, Weld on Adaptor
Flow Ranges : min. from 4.33 to 58000 LPM
Max. Operating Temperature: 60° C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting
Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
Paddle : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
Indicator Housing : Polycarbonate
O-rings/Pin : Viton/Hastealloy C
Sensor Rod : PP or, SS316
Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and
12 Kg/cm2 for SS Sensor with SS fitting.
Display : 16 X 2 alpha-numeric LCD display with Backlit
Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK
Supply : 230 V AC +/- 15%, 50 H
T Fitting : It is compulsory with PP or, SS 316 Flow Sensors
(Selection from TYPE OF T-FITTINGS)
2m 144 mhz 146mhz receiver
Her I am use MC3357 / LA1186 in this 2m Receiver
This experiment was done when I was a SWL lesson 145.625MHz Repeater / 145.650MHz Repeater 59 Signal Repot With my Home brew ground plan Antenna 10 feet height Excellent Sensitivity without preamp . Local osc are very stable when I on Rx 2min in drift +- 50 kHz and get very stable in 24 hrs.
This Receiver good perform for SWL / Ham operators / Monitor 2m band.
Lika Electronic Absolute Encoders with Profinet Interface
A brief description of Lika Electronic encoders with Profinet interface. Find more at http://www.lika.it/eng/prodotti.php?id_cat=267&id_fam=270&id_sfam=492
Omni high precision cnc router
A CNC router machine is described with working areas of 1300x2500mm and 1500x3000mm, 0.03mm positioning accuracy, AC servo motors, a DSP remote controller, 9KW spindle motor, linear guides on the X, Y, and Z axes, 45m/min maximum traverse speed, water cooling or free oil vacuum pumps, and either linear or carousel automatic tool changers. The machine cuts with G-code or PLT files and includes a dust collector hood and dust collection system.
Recommended
Microfuge Centrifuge by ACMAS Technologies Pvt Ltd.
We are microfuge centrifuge suppliers, microfuge manufacturers India, microfuge centrifuge exporters, laboratory centrifuge microfuge and exporters of other hospital and laboratory equipments from India. For More Information Please Logon http://cutt.us/21jJ
35 m hz frequency counter
This document describes a 35MHz frequency counter that uses a PIC16F628A microcontroller and 16x1 LCD display. The frequency counter can measure frequencies up to 35MHz with 150mV sensitivity. It has features like two gate time settings, 10Hz resolution, 9 offset channels, and USB/LSB display modes. The circuit contains mainly passive components like resistors, capacitors, and an inductor.
frequency counter
The document describes a VHF 80MHz-160MHz frequency counter. It uses an LC7265 and LB3500 prescaler to measure frequencies within this range with a resolution of 50 kHz. It can handle input voltages between 100mV to 600mV RMS and supports several common FM intermediate frequencies between +10.7 MHz and -10.65 MHz. The circuit diagram and component list are provided.
Arc900 v1.1.8en
The ARC900 series paperless recorder has multi-channel data logging capabilities with high accuracy. It can record input signals from up to 16 channels, display data on a 5.6" LCD screen, and store recorded data on USB/SD memory cards. Key features include high accuracy of +/-0.15% of reading, relay and 4-20mA outputs, and data storage for over 789 years with optional memory cards.
Insertion Paddle Wheel type Flow Totalizer series 282
Digital flow rate Indicator with Totalizer with Relay/Batcher/Pulser (Models : P-282 & F-282)
Type of sensor : Insertion Paddle Wheel type Flow Rate Indicator with Totalizer
Max. % of Solids : 1 % of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length
Mounting : Field or, Panel
Pipe Line size : min. 15 mm up to 500 mm
Pressure drop : Less than 0.1 bar
Pulses : 4 Pulses each rotation
Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s
Repeatability : +/- 0.5%
Enclosure : Weather proof IP 65
Gland : PO7
Fitting material : ABS, SS304 or, SS316
Fitting Type : Threaded, Flanged, Weld on Adaptor
Flow Ranges : min. from 4.33 to 58000 LPM
Max. Operating Temperature: 60° C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting
Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
Paddle : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
Indicator Housing : Polycarbonate
O-rings/Pin : Viton/Hastealloy C
Sensor Rod : PP or, SS316
Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and
12 Kg/cm2 for SS Sensor with SS fitting.
Display : 16 X 2 alpha-numeric LCD display with Backlit
Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK
Supply : 230 V AC +/- 15%, 50 H
T Fitting : It is compulsory with PP or, SS 316 Flow Sensors
(Selection from TYPE OF T-FITTINGS)
2m 144 mhz 146mhz receiver
Her I am use MC3357 / LA1186 in this 2m Receiver
This experiment was done when I was a SWL lesson 145.625MHz Repeater / 145.650MHz Repeater 59 Signal Repot With my Home brew ground plan Antenna 10 feet height Excellent Sensitivity without preamp . Local osc are very stable when I on Rx 2min in drift +- 50 kHz and get very stable in 24 hrs.
This Receiver good perform for SWL / Ham operators / Monitor 2m band.
Lika Electronic Absolute Encoders with Profinet Interface
A brief description of Lika Electronic encoders with Profinet interface. Find more at http://www.lika.it/eng/prodotti.php?id_cat=267&id_fam=270&id_sfam=492
Omni high precision cnc router
A CNC router machine is described with working areas of 1300x2500mm and 1500x3000mm, 0.03mm positioning accuracy, AC servo motors, a DSP remote controller, 9KW spindle motor, linear guides on the X, Y, and Z axes, 45m/min maximum traverse speed, water cooling or free oil vacuum pumps, and either linear or carousel automatic tool changers. The machine cuts with G-code or PLT files and includes a dust collector hood and dust collection system.
Semiconductor equipment parts in stock-SSe-0141
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
Analoge1
1k
Ui
R
1k
U 1
+
741
O U T
-
Uo
2C
2μF
R 1
586E
R 0
1k
0
This document describes various op-amp circuit configurations including: inverting and non-inverting amplifiers, summers, subtractors, integrators, differentiators, active filters of various orders, and other specialized circuits like comparators, Schmitt triggers, detectors, and filters. The properties and applications of different op-amps are also discussed.
Auf750 v1.1.8en
The AUF750 series ultrasonic flowmeter uses transit time technology to provide non-invasive liquid flow measurement. It has high accuracy of +/-0.5%, measures a wide range of velocities from 0.01-32 m/s, and can be installed on pipes from 15mm to 6000mm. The flowmeter offers data logging, totalizers, 4-20mA output, and RS-232 communication.
1000w ampli com fets
This circuit diagram shows a high power audio amplifier with 20 identical channels. Each channel contains an IRFP240 MOSFET transistor configured as a common source amplifier. Protection components include flyback diodes and Zener diodes. Large value capacitors are placed throughout for power supply filtering and decoupling.
55. RM60
The RM-60 is a cash register and scale designed for use in open retail markets. It has a 176 x 16 dot LCD display for the operator and an optional 176 x 16 dot LCD customer display. It can weigh in increments of 1, 2, or 5 grams up to 30 kilograms and has 8 preset number keys. The RM-60 is powered by AC power with the option for a rechargeable battery backup. It connects to a cash drawer, USB devices for price and inventory management, and an Ethernet port for network connectivity.
Controlador ORP Milton Roy
Controlador ORP Milton Roy
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
IM 42XX Series - Intelligent Monitoring System - Panel Mount. (Serial & 4-20m...
"Intelligent Gas Monitoring System" product developed by me in the 'Ambetronics Engineers Pv. Ltd.' for Gas & Temperature monitoring with multiple features.
Catalog of 10" touch screen, Panel Mount, Modbus &
4-20mAmp input, having relay outputs and Serial port (Modbus) for communicating with the BMS/SCADA/DCS/Fire Panel. or any external device such as IoT devices / GSM modems.
For more details contact us at https://ambetronics.com
FPI 1000P
This document provides specifications for an FPI 1000P generator set including:
- Power ratings of 1000kVA at 50Hz and 995.2kVA at 60Hz at 0.8 power factor
- Prime and standby power definitions and usage limitations
- Engine model, speed, cooling and lubrication details
- Alternator model, voltage regulation, and performance data
- Standard enclosure dimensions and optional enhanced enclosure specifications
IM 48XX Series - Intelligent Monitoring System - Panel Mount. (Serial RS-485 ...
"Intelligent Gas Monitoring System" product developed by me in the 'Ambetronics Engineers Pv. Ltd.' for Gas & Temperature monitoring with multiple features. Catalog of a touch screen, Modbus RS-485 inputs, having relay outputs and Serial port (Modbus) for communicating with the BMS/SCADA/DCS/Fire Panel. or any external device such as IoT devices / GSM modems. For more details contact us at https://ambetronics.com
Counters
This document discusses the design and simulation of counters in Cadence. It begins by describing the applications of counters such as timers, frequency counting, and finite state machines. It then discusses different types of counters like asynchronous/ripple counters and synchronous counters. The document presents the design and simulation of an asynchronous 4-bit Johnson counter and an asynchronous 4-bit up counter in Cadence. It provides the schematic diagrams, simulation waveforms, power consumption, delay characteristics, and maximum operating frequencies for each counter.
LED LCD COF/TAB stock list
VD-680-ps is the best led/lcd tab bonding machine. Its manufactured and designed by VD Intellisys Technologies ,India. Customers like Foxconn, Panasonic ,Sohnen,Chiptroniks are using this. Also we stock all types of cof/tab , acf remover and acf tape
Roller conveyor 24 Volts motor
Moto 24 is an innovative system that permits to motorize roller conveyor lines, using 24 Volts technology.
Original Microcontroller IC R5F104BDA R5F 104BDA 104 New
This document provides an overview and specifications for the Renesas RL78/G14 microcontroller, including:
- Ultra-low power consumption down to 66 μA/MHz and 0.60 μA for RTC + LVD. Operates from 1.6V to 5.5V.
- 16 to 512 KB flash memory, 44 DMIPS performance at 32MHz.
- Various low power modes like HALT, STOP, and SNOOZE.
- On-chip peripherals include timers, ADC, DAC, comparators, serial interfaces, and I/O ports.
- Packaged in LQFP, LSSOP, QFN packages with pin counts from 30
Iai rcp2 gr3_ls_specsheet
This document provides specifications for the RCP2-GR3LS ROBO Cylinder 3-Finger Gripper Lever Type including:
1. Key specifications like a stroke of 19 degrees, maximum gripping force of 200N, and compatible controllers.
2. A graph showing how gripping force varies with current limit from 0-70%.
3. Dimensions and mounting information for the actuator.
4. An overview of compatible simple and programmable motion controllers for the RCP2 series actuators.
LIGO fuel level protocol rev c
RS232/RS485 protocol of fuel level sensor. this protocol as same as protocol DUT-E from Technoton, LLS from Omnicomm
Iai pcon abu_acon_abu_controller_specsheet
The document describes a simple absolute unit that can be attached to certain ACON/PCON controllers to allow them to function as absolute models without needing to home at power-up. It retains encoder data for up to 20 days. The unit is small, measuring 34mm x 100mm x 75.3mm, and can be used with compatible RCA and RCP series actuators. It requires a 24V power supply and includes a battery backup.
FPI 800P
This document provides specifications for an FPI 800P generator including:
- KW and KVA ratings at 50Hz and 60Hz frequencies and 0.8 power factor.
- Prime and standby power ratings defined.
- Technical data for the Perkins 4006-23TAG3A engine including displacement, speed, emissions regulations, and fuel consumption.
SNV CV JANIS N JOSEPH 2016
Janis Natersha Joseph is a 39-year-old Zimbabwean logistics officer with over 9 years of experience in an international NGO. She has experience in logistics coordination, functions coordination, driving including heavy duty trucks, petty cash management, and computer skills. She is proficient in English and competent in Shona and Ndebele. Her education includes certificates in defensive driving, industrial first aid, fire training, office administration and computers. She has professional experience as a logistics officer, heavy duty driver, and human resources secretary and supervisor of catering, laundry and a supermarket.
Tema 17
Este documento resume el funcionamiento de la Unión Europea. Explica que la UE se formó después de la Segunda Guerra Mundial para promover la paz, la cooperación económica y la prosperidad en Europa. Detalla las principales instituciones de la UE como la Comisión Europea, el Parlamento Europeo, el Consejo de la UE y el Tribunal de Justicia. Además, brinda información sobre los 28 estados miembros actuales de la UE y los posibles candidatos a la membresía.
Resume - Mohamed Ahmed Aldahshan
Mohamed Ahmed Aldahshan is a senior human resources manager with over 11 years of experience in HR management, personnel administration, and general business operations. He is currently seeking a new challenging managerial role. He has strong skills in HR policies and procedures, recruitment, performance management, training, and statutory compliance. Previously, he worked as an HR assistant manager for an engineering consultancy and assistant show manager for an interior design exhibition. He holds a Bachelor's degree in Business Administration.
Teacher Resume
Kenneth Cowan has over 30 years of experience as a K-12 teacher in both public and private schools. He has taught English, social studies, math, and science to students from elementary through high school levels. Cowan is skilled in creating lesson plans, assessing student progress, and maintaining records. He emphasizes developing critical thinking and communication skills through collaborative work and journal writing.
More Related Content
What's hot
Semiconductor equipment parts in stock-SSe-0141
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
Analoge1
1k
Ui
R
1k
U 1
+
741
O U T
-
Uo
2C
2μF
R 1
586E
R 0
1k
0
This document describes various op-amp circuit configurations including: inverting and non-inverting amplifiers, summers, subtractors, integrators, differentiators, active filters of various orders, and other specialized circuits like comparators, Schmitt triggers, detectors, and filters. The properties and applications of different op-amps are also discussed.
Auf750 v1.1.8en
The AUF750 series ultrasonic flowmeter uses transit time technology to provide non-invasive liquid flow measurement. It has high accuracy of +/-0.5%, measures a wide range of velocities from 0.01-32 m/s, and can be installed on pipes from 15mm to 6000mm. The flowmeter offers data logging, totalizers, 4-20mA output, and RS-232 communication.
1000w ampli com fets
This circuit diagram shows a high power audio amplifier with 20 identical channels. Each channel contains an IRFP240 MOSFET transistor configured as a common source amplifier. Protection components include flyback diodes and Zener diodes. Large value capacitors are placed throughout for power supply filtering and decoupling.
55. RM60
The RM-60 is a cash register and scale designed for use in open retail markets. It has a 176 x 16 dot LCD display for the operator and an optional 176 x 16 dot LCD customer display. It can weigh in increments of 1, 2, or 5 grams up to 30 kilograms and has 8 preset number keys. The RM-60 is powered by AC power with the option for a rechargeable battery backup. It connects to a cash drawer, USB devices for price and inventory management, and an Ethernet port for network connectivity.
Controlador ORP Milton Roy
Controlador ORP Milton Roy
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
IM 42XX Series - Intelligent Monitoring System - Panel Mount. (Serial & 4-20m...
"Intelligent Gas Monitoring System" product developed by me in the 'Ambetronics Engineers Pv. Ltd.' for Gas & Temperature monitoring with multiple features.
Catalog of 10" touch screen, Panel Mount, Modbus &
4-20mAmp input, having relay outputs and Serial port (Modbus) for communicating with the BMS/SCADA/DCS/Fire Panel. or any external device such as IoT devices / GSM modems.
For more details contact us at https://ambetronics.com
FPI 1000P
This document provides specifications for an FPI 1000P generator set including:
- Power ratings of 1000kVA at 50Hz and 995.2kVA at 60Hz at 0.8 power factor
- Prime and standby power definitions and usage limitations
- Engine model, speed, cooling and lubrication details
- Alternator model, voltage regulation, and performance data
- Standard enclosure dimensions and optional enhanced enclosure specifications
IM 48XX Series - Intelligent Monitoring System - Panel Mount. (Serial RS-485 ...
"Intelligent Gas Monitoring System" product developed by me in the 'Ambetronics Engineers Pv. Ltd.' for Gas & Temperature monitoring with multiple features. Catalog of a touch screen, Modbus RS-485 inputs, having relay outputs and Serial port (Modbus) for communicating with the BMS/SCADA/DCS/Fire Panel. or any external device such as IoT devices / GSM modems. For more details contact us at https://ambetronics.com
Counters
This document discusses the design and simulation of counters in Cadence. It begins by describing the applications of counters such as timers, frequency counting, and finite state machines. It then discusses different types of counters like asynchronous/ripple counters and synchronous counters. The document presents the design and simulation of an asynchronous 4-bit Johnson counter and an asynchronous 4-bit up counter in Cadence. It provides the schematic diagrams, simulation waveforms, power consumption, delay characteristics, and maximum operating frequencies for each counter.
LED LCD COF/TAB stock list
VD-680-ps is the best led/lcd tab bonding machine. Its manufactured and designed by VD Intellisys Technologies ,India. Customers like Foxconn, Panasonic ,Sohnen,Chiptroniks are using this. Also we stock all types of cof/tab , acf remover and acf tape
Roller conveyor 24 Volts motor
Moto 24 is an innovative system that permits to motorize roller conveyor lines, using 24 Volts technology.
Original Microcontroller IC R5F104BDA R5F 104BDA 104 New
This document provides an overview and specifications for the Renesas RL78/G14 microcontroller, including:
- Ultra-low power consumption down to 66 μA/MHz and 0.60 μA for RTC + LVD. Operates from 1.6V to 5.5V.
- 16 to 512 KB flash memory, 44 DMIPS performance at 32MHz.
- Various low power modes like HALT, STOP, and SNOOZE.
- On-chip peripherals include timers, ADC, DAC, comparators, serial interfaces, and I/O ports.
- Packaged in LQFP, LSSOP, QFN packages with pin counts from 30
Iai rcp2 gr3_ls_specsheet
This document provides specifications for the RCP2-GR3LS ROBO Cylinder 3-Finger Gripper Lever Type including:
1. Key specifications like a stroke of 19 degrees, maximum gripping force of 200N, and compatible controllers.
2. A graph showing how gripping force varies with current limit from 0-70%.
3. Dimensions and mounting information for the actuator.
4. An overview of compatible simple and programmable motion controllers for the RCP2 series actuators.
LIGO fuel level protocol rev c
RS232/RS485 protocol of fuel level sensor. this protocol as same as protocol DUT-E from Technoton, LLS from Omnicomm
Iai pcon abu_acon_abu_controller_specsheet
The document describes a simple absolute unit that can be attached to certain ACON/PCON controllers to allow them to function as absolute models without needing to home at power-up. It retains encoder data for up to 20 days. The unit is small, measuring 34mm x 100mm x 75.3mm, and can be used with compatible RCA and RCP series actuators. It requires a 24V power supply and includes a battery backup.
FPI 800P
This document provides specifications for an FPI 800P generator including:
- KW and KVA ratings at 50Hz and 60Hz frequencies and 0.8 power factor.
- Prime and standby power ratings defined.
- Technical data for the Perkins 4006-23TAG3A engine including displacement, speed, emissions regulations, and fuel consumption.
What's hot (17)
IM 42XX Series - Intelligent Monitoring System - Panel Mount. (Serial & 4-20m...
IM 42XX Series - Intelligent Monitoring System - Panel Mount. (Serial & 4-20m...
IM 48XX Series - Intelligent Monitoring System - Panel Mount. (Serial RS-485 ...
IM 48XX Series - Intelligent Monitoring System - Panel Mount. (Serial RS-485 ...
Original Microcontroller IC R5F104BDA R5F 104BDA 104 New
Original Microcontroller IC R5F104BDA R5F 104BDA 104 New
Viewers also liked
SNV CV JANIS N JOSEPH 2016
Janis Natersha Joseph is a 39-year-old Zimbabwean logistics officer with over 9 years of experience in an international NGO. She has experience in logistics coordination, functions coordination, driving including heavy duty trucks, petty cash management, and computer skills. She is proficient in English and competent in Shona and Ndebele. Her education includes certificates in defensive driving, industrial first aid, fire training, office administration and computers. She has professional experience as a logistics officer, heavy duty driver, and human resources secretary and supervisor of catering, laundry and a supermarket.
Tema 17
Este documento resume el funcionamiento de la Unión Europea. Explica que la UE se formó después de la Segunda Guerra Mundial para promover la paz, la cooperación económica y la prosperidad en Europa. Detalla las principales instituciones de la UE como la Comisión Europea, el Parlamento Europeo, el Consejo de la UE y el Tribunal de Justicia. Además, brinda información sobre los 28 estados miembros actuales de la UE y los posibles candidatos a la membresía.
Resume - Mohamed Ahmed Aldahshan
Mohamed Ahmed Aldahshan is a senior human resources manager with over 11 years of experience in HR management, personnel administration, and general business operations. He is currently seeking a new challenging managerial role. He has strong skills in HR policies and procedures, recruitment, performance management, training, and statutory compliance. Previously, he worked as an HR assistant manager for an engineering consultancy and assistant show manager for an interior design exhibition. He holds a Bachelor's degree in Business Administration.
Teacher Resume
Kenneth Cowan has over 30 years of experience as a K-12 teacher in both public and private schools. He has taught English, social studies, math, and science to students from elementary through high school levels. Cowan is skilled in creating lesson plans, assessing student progress, and maintaining records. He emphasizes developing critical thinking and communication skills through collaborative work and journal writing.
Digital engagement: building trust and community through authenticity
How small teams can create and manage digital engagement to build trust and relationships. Includes provocations!
A big-data-approach-to-energy-management-in-retail
Big data analytics can help retailers significantly reduce energy consumption and costs. By collecting and analyzing large amounts of data on energy usage from multiple stores, inefficiencies can be identified and addressed. This allows standardization of operations and identification of unexpected issues. Leading retailers have saved 4-20% on energy costs through big data-driven programs that monitor equipment usage and optimize performance. In addition to energy savings, big data can improve maintenance, planning, and customer experience for retailers.
Chapter 4 implementation issues of va r
This document discusses implementation issues related to value-at-risk (VaR) models. It addresses the "ghost effect" where sudden changes in VaR can occur due to the time window used to calculate standard deviation. It also discusses exponentially weighted moving average schemes, backtesting VaR estimates, issues with assuming a normal distribution of returns, and industry implementations of major VaR systems including Bloomberg and RiskMetrics.
Viewers also liked (9)
Digital engagement: building trust and community through authenticity
Digital engagement: building trust and community through authenticity
A big-data-approach-to-energy-management-in-retail
A big-data-approach-to-energy-management-in-retail
Similar to Microfuge Centrifuge
High Speed Lab Centrifuge by ACMAS Technologies Pvt Ltd.
This range of centrifuges are designed for high speed centrifuging applications. The equipment is provided with
speed control, digital temperature control cum indicator, digital timer with a range of 0-99 minutes and alarm at
automatic switching off, dynamic brake, zero start interlock, safety cut off in case of imbalance and lid locking
switch etc.
High Speed Lab Centrifuge
This document provides information on a range of centrifuges from Technologies PVT Ltd. The centrifuges are designed for high speed applications and include features like speed control, digital temperature display, timers, safety cutoffs, and locking mechanisms. Tables list specifications for different centrifuge models including capacity, tube size, maximum speed in RPMs and RCF, dimensions, weight, and electrical requirements. The company details contact information for sales offices in Hong Kong and Russia as well as the corporate office in India.
Microprocessor Research Centrifuge
This document summarizes the specifications of a microprocessor-controlled centrifuge. It has a brushless induction motor, programmable microprocessor control to preset RPM from 100 to 20,000, and temperature control from 10 to 40 degrees Celsius. It displays readings like RPM, RCF, time remaining, and temperature. Key specifications include a maximum speed of 18,000 RPM, RCF of 25,200, accommodating tubes up to 100 ml, and a lowest temperature of -10 degrees Celsius. It also lists specifications for interchangeable rotor heads with different capacities and speeds.
General Purpose Lab Centrifuge by ACMAS Technologies Pvt Ltd.
We are manufacturers & exporters of general purpose lab centrifuge India, laboratory centrifuge, clinical centrifuge suppliers, lab centrifuge manufacturer, laboratory centrifuge India, centrifuge manufacturers India. For More Information Please Logon http://cutt.us/1aA8
Refrigerated centrifuge
Multipurpose Centrifuge that accommodates a large number of Rotor Heads of varying tube capacities. The Tabletop
model centrifuge is provided with stepless autovariac speed control and with seperate control panel having
digital speed indicator, digital Timer of 0-99 minutes and automatic switching off, alarm signal, digital temperature
control cum indicator with a range of -20 o c to +40 o c. The equipment also feature dynamic barke, zero start inter
lock, safety cut off in case of imbalance and lid locking switch.
General Purpose Lab Centrifuge
Lab Centrifuge Manufacturers, Lab Centrifuge Suppliers, Lab Centrifuge Exporters, Lab Centrifuge India
Rotor Insertion Flow Meter Technical Information
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
Centrifuge Machine
The best model for clinical, Pathological, Biochemistry, and Pharmacy Labs
It is also most suitable for infertility labs where low speed is required.
Technical Specification
Bench Top Centrifuge Machine. The body is made of CRC sheet, finished in
power coating.
Orto Alresa series_Digtor_22_C_ENG.pdf
This document provides information on several models of centrifuges for industrial and laboratory use. It describes the Digtor 22 C series which includes heated and unheated models with capacities of 4 or 8 tubes. Key features highlighted include a touchscreen interface, safety features on the lid, automatic disconnection, and rotors and adapters that can be autoclaved. Dimensions, weights, and electrical specifications are provided for each model. Accessories include various tube sizes and types as well as an optional gas release system.
Refrigerated Centrifuge
This document provides specifications for a refrigerated centrifuge. It can accommodate various rotor heads holding different tube capacities. It has stepless autovariac speed control up to 18,000 rpm and temperature control down to -10°C. Additional features include dynamic braking, zero start interlock, and safety cut off for imbalance. Specification tables list models, capacities, speeds, and centrifugal forces for different rotor heads.
EAPL TIMER & CONTROLLER PRICE LIST wef 01-08-2022.pdf
The document provides a product catalog listing various timing relays, timers, and time switches along with their model numbers, descriptions, HSN codes, and unit prices. It includes on/off delay timers, interval timers, star-delta timers, cyclic timers, auxiliary relays, antipumping relays, digital timers, sequential timers, combination timers, and digital time switches. Product lines include A-series, B-series, ETR-series, H-series, C-series, and S-series timers with various voltage and timing range options. Key features of each product line or type of timer are also summarized.
Counter top purifiers catalogue
* We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.
Iai rcp2 rtc_rtcl_specsheet
(1) The RCP2 ROBO Cylinder rotary actuator uses a pulse motor with varying output torque and allowable moment of inertia based on rotational speed.
(2) It can rotate 330 or 360 degrees depending on the model, with a maximum rated acceleration of 0.3G.
(3) The document provides specifications, diagrams, compatible controller options and other details about the actuator.
Counter top purifiers catalog
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work. Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
Bombas de Refrigeração Hermetic
Bombas de Refrigeração Hermetic
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Weg pump-genius-control-multiplie-pumps-with-one-drive-usapumpscfw11-brochure...
Pump Genius software controls pumping systems to reduce costs and increase accuracy. It monitors pressure and flow, manages multiple pumps, and protects pumps from issues like dry wells or blocked impellers. The software works with WEG CFW11 variable frequency drives to control pump speed for various pumping applications from simplex to complex multi-pump systems.
Iai rcp2 rtcb_rtcbl_1_specsheet
The document provides specifications for the RCP2-RTCB/RTCBL ROBO Cylinder rotary actuator. It includes details on:
1) The output torque and allowable moment of inertia decrease as rotational speed increases, with graphs showing speed and load capacity limits.
2) The rated acceleration is 0.3G while moving.
3) It can be used with various compatible controllers, including position, pulse train input, and program control types.
Iai rcp2 rtbb_rtbbl_specsheet
The RCP2 ROBO Cylinder is a rotary actuator with the following key specifications:
1) It has a maximum torque that decreases with increasing rotational speed.
2) It has an allowable moment of inertia for the rotated workpiece that varies with rotational speed.
3) Its rated acceleration is 0.3G while moving.
Algae x fuel management systems - technical presentation - rev a
The document discusses various fuel maintenance systems from Algae-X that are designed to filter and clean fuel tanks. It provides specifications for stationary and mobile systems ranging from 3 to 25 gallons per minute that can be used to treat fuel tanks from less than 200 gallons to over 50,000 gallons in size. Key components and control features are described to optimize fuel quality, ensure safety, and provide reliable emergency power.
Kollmorgen nema 23 t specsheet
The document provides specifications for Pacific Scientific T-Series NEMA 23 high torque motors, including torque ratings, phase configurations, connection options, and performance characteristics. It lists motor models, their holding torques in oz-in and N-m, phase currents, resistance, inductance, detent torque, thermal resistance, and inertia. Graphs show torque-speed curves for various motor models operated at different current levels.
Similar to Microfuge Centrifuge (20)
High Speed Lab Centrifuge by ACMAS Technologies Pvt Ltd.
High Speed Lab Centrifuge by ACMAS Technologies Pvt Ltd.
General Purpose Lab Centrifuge by ACMAS Technologies Pvt Ltd.
General Purpose Lab Centrifuge by ACMAS Technologies Pvt Ltd.
EAPL TIMER & CONTROLLER PRICE LIST wef 01-08-2022.pdf
EAPL TIMER & CONTROLLER PRICE LIST wef 01-08-2022.pdf
Weg pump-genius-control-multiplie-pumps-with-one-drive-usapumpscfw11-brochure...
Weg pump-genius-control-multiplie-pumps-with-one-drive-usapumpscfw11-brochure...
Algae x fuel management systems - technical presentation - rev a
Algae x fuel management systems - technical presentation - rev a
Recently uploaded
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
Direct Seeded Rice - Climate Smart Agriculture
Direct Seeded Rice - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Direct Seeded Rice presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
11.1 Role of physical biological in deterioration of grains.pdf
Storagedeteriorationisanyformoflossinquantityandqualityofbio-materials.
Themajorcausesofdeteriorationinstorage
•Physical
•Biological
•Mechanical
•Chemical
Storageonlypreservesquality.Itneverimprovesquality.
Itisadvisabletostartstoragewithqualityfoodproduct.Productwithinitialpoorqualityquicklydepreciates
20240520 Planning a Circuit Simulator in JavaScript.pptx
Evaporation step counter work. I have done a physical experiment.
(Work in progress.)
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
Authoring a personal GPT for your research and practice: How we created the Q...
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Pests of Storage_Identification_Dr.UPR.pdf
InIndia-post-harvestlosses-unscientificstorage,insects,rodents,micro-organismsetc.,accountforabout10percentoftotalfoodgrains
Graininfestation
Directdamage
Indirectly
•theexuviae,skin,deadinsects
•theirexcretawhichmakefoodunfitforhumanconsumption
About600speciesofinsectshavebeenassociatedwithstoredgrainproducts
100speciesofinsectpestsofstoredproductscauseeconomiclosses
Katherine Romanak - Geologic CO2 Storage.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
快速办理(UAM毕业证书)马德里自治大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(UAM毕业证书)马德里自治大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Recently uploaded (20)
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
11.1 Role of physical biological in deterioration of grains.pdf
11.1 Role of physical biological in deterioration of grains.pdf
20240520 Planning a Circuit Simulator in JavaScript.pptx
20240520 Planning a Circuit Simulator in JavaScript.pptx
Authoring a personal GPT for your research and practice: How we created the Q...
Authoring a personal GPT for your research and practice: How we created the Q...
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
GBSN - Biochemistry (Unit 6) Chemistry of Proteins
GBSN - Biochemistry (Unit 6) Chemistry of Proteins
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
Microfuge Centrifuge
- 2. This range of are used for low volume centrifuging applications. The unit is provided with stepless speed control, speed indicator and timer. Acm 67893-C(1) Micro Centrifuge with stepless speed control, analogue speed indicator, 0-60 minutes pre-set timer and pilot indicator lamp Acm 67893-C(2) Micro Centrifuge with stepless speed control, digital speed indicator, 0-99 minutes digital timer and illuminated switch Acm 67893-C(3) Micro Centrifuge with stepless speed control, digital speed indicator, 0-99 minutes digital timer, lid lock, brake, zero start inter lock and illuminated switch Acm 67893-C(4) Refrigerated Micro Centrifuge with stepless speed control, digital speed indicator, 0-99 minutes digital timer, alarm at automatic switching off, dynamic brake, zero start inter lock, digital temperature control cum indicator, lid locking switch.Max. speed 16000 RPM & Max. RCF 17600 xg. Microfuge Centrifuge MODELS FEATURES R TECHNOLOGIES PVT. LTD. Ÿ Maximum Speed 16000 RPM Ÿ Refrigerated and Non Refrigerated Models Ÿ Micro hierocrat tubes can be used Ÿ Ideal for blood banks and pathology laboratories Ÿ Ergonomic Design Ÿ Easy Lid Lock Ÿ Step less Speed Regulator Ÿ Digital Speed Indicator Ÿ Zero Start Ÿ Inter lock device Ÿ Digital Timer Ÿ Dynamic Balancing Ÿ Dynamic Brake Ÿ Wide Range of Rotor Heads Ÿ Illuminated Switch
- 3. Model TC 481 TC 483 TC 484 TC 485 TC 486 TC 487 TC 488 TC 489 TC 490 TC 491 TC 492 TC 495 TC 496 TC 495R Cap. / ml 24 x 1.5 30 x 0.4 16 x 1 8 x 3 6 x 5 8 x 4 8 x 3 8 x 2 8 x 3 10 x 1 12 x 0.5 Micro Haematocrit Rotor 24 x Heparinized capillary tube Micro Haematocrit Rotor 12 x QBC - II Plus System Reading device for TC 495 Type Angle Angle Angle Angle Angle Angle Angle Angle Angle Swing Out Angle Type of Tube Eppendorf Eppendorf Eppendorf Eppendorf P.P.( T.B.) P.P.( T.B.) P.P.(R.B.) P.P.(R.B.) Glass ( R.B.) Glass ( R.B.) Glass ( R.B.) RCF xg 15250 12800 12800 12800 12800 12800 12800 17500 17500 17500 17500 15500 15500 - RPM 12000 12000 12000 12000 12000 12000 12000 16000 16000 16000 16000 16000 12000 - R MORE SPECIFICATIONS TECHNOLOGIES PVT. LTD.
- 4. www.acmasindia.com | www.cleanroom-equipments.com | www.test-chambers.com SALES OFFICE (HONG KONG) SALES OFFICE (RUSSIA) Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East, Sheung Wan, Hong Kong (PRC) Tel.: 0086-13929598046 | 0086- 18922303099 E-mail.: hk@acmasindia.com Inmed Trade Street Ozerkovsky Embankment, Unit No 50, Straine- 1, Off- 502, Moscow, Russia E-mail.: info@acmasindia.com Tel.: 0049- 79592345 | Email: russia@acmasindia.com TECHNOLOGIES PVT. LTD. An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485 WHO: GMP Products | GLP Compliant Products CORPORATE OFFICE/ (INDIA)SHOWROOM Plot No. 352-353, Sector – 57 Phase- IV Kundli, Sonepat, HR 131028 Land Line No.: +91 - 11- 47619688, Fax: +91-11-47619788 E-mail.: info@acmasindia.com