MEP Engineering deals with Mechanical, Electrical and Plumbing systems which have a vital role in the building industry. Mechanical part includes heating, ventilating and cooling systems often referred to as HVAC. Electrical part includes Electrical designing. Plumbing engg also included.

1. 2015www.gideindia.com
info@gideindia.com
GLOBAL INSTITUTE FOR DESIGN & ENGINEERING
( G.I.D.E )
The first American National Standard Institution (ANSI) ISO 9001:2008
Approved Design & Engineering training Organization
M.E.P Designing and Drafting + Revit MEP
Today is the world of architecture and building where complex buildings are
being erected day by day. Taller structures have even become the icon of
development of a country. This answers the great importance given to
construction related works and the huge demand for efficient and
experienced workers in the field. In most developed and fast growing
countries there are huge demands for experienced Mechanical, Electrical and
Piping/ Plumbing (MEP) workers on huge projects such as the construction of
airports, hospitals, schools, shopping malls and such where central air
conditioning system is applied.
 Only an outline of syllabus has been published for reference purpose
MECHANICAL
HVAC
HVAC Programme with core curicullum of subject covering topics like
fundamentals, cooling load & heat loss calculations, central heating system
design, air distribution system design, chilled water system design, chilled
water piping design, commercial ventilation system design, kitchen
ventilation system design, VAV system design, equipment selection with live
projects.

2. 2015www.gideindia.com
info@gideindia.com
1. HVAC INTRODUCTION
 Heating
 Ventilation
 Air Conditioning
 Refrigeration
2. HEAT TRANSFER
 Conduction
 Convection
3. REFRIGERATION
 Refrigeration Cycle
4. COMPONENTS OF A/C SYSTEM
5. CLASSIFICATION OF A/C
6. PSYCHOMETRIC CHART
 Dry bulb temperature
 Wet bulb temperature
 Dew point temperature
 Psychometric process
7. TYPES OF A/C SYSTEM
8. HEAT LOAD CALCULATION
9. VENTILATION
 Kitchen hood ventilation
 Car parking ventilation
 Toilet ventilation
10. DUCT DESIGNING
 Types of duct designing
 Diffusers
 Grills
11. CHILLERS

3. 2015www.gideindia.com
info@gideindia.com
12. INSULATION
13. AIR HANDLING UNIT
14. COOLING TOWER AND WATER PIPING
15. PUMPS AND VALVES
16. THUMB RULES
17. COLD STORAGE DESIGN
18. PROJECT WORK
 SOFTWARES USED:
 AutoCAD
 HAP :- Hourly Analysis Program
 Duct size
 BETA Program
 Pipe size
ELECTRICAL
DESIGN & Drafting
We equip students to become a professional in Electrical – Building Services
Industry. We train in such a way that the industry will invite you and offer
jobs. The Course curriculum is designed to provide knowledge and expertise
in the Design, Analysis, Installation, Maintenance & Testing of Building
Electrical Systems per IEC &IS/ NEC Guidelines.
The objective of this course is to provide the delegates the basic knowledge
and skills in this discipline to facilitate faster learning curves while on the job.

4. 2015www.gideindia.com
info@gideindia.com
ELECTRICAL SYSTEMS &DRAFTING (General)
The Programme focuses on
Design, Drafting of Electrical Power Supply
Installation & Distribution
Drawing interpretation
Commercial Interior Lighting
Modern Closed Circuit Television System Design
Security System Design
Fire Alarm System Design
Conduit System Design
Low Current Systems
Sound Systems
Overview of Codes & Standards & Safety.
For E E E
 Introduction To EPC Sector
 Design Task And Introduction To Various
Phases Of Project
 Introduction Of Key Electrical
Equipments And Their Abbreviations /
Technical Names Used In Projects
 Preparations Of Electrical Load Schedule
 Preparations Of Single Line Diagram(LT &
HT)
 Preparation Of Control Schematics
 System Studies And Calculation
 Selection Of Transformers
 Selection Of Generators
 Selection Of Motors Pumps Etc
 Protection For Transformers,
 Protection For Generators, Motors
Pumps Etc
 Cable Types
 Cable Selection For Transformers,
 Cable Selection For Generators
 Cable Selection For Motors And Pumps.
 Selection Of Bus Bar
 Selection And Sizing Of Electrical
Equipments Used In Various Projects
 Sizing And Selection Of L V Switchgears
(MCB,MCCB, RCB, RCBO MPCB)
 Calculation of load on circuit
 Design of sub circuit (Lighting Circuit and
Power Circuit)
 Distribution of Power Circuit
 Selection Of Capacitor Banks Used For
Power Factor Correction.
 Earthing /Grounding Design
 Communication CCTV Systems
 Overview Of Codes & Standards
(National & International)

5. 2015www.gideindia.com
info@gideindia.com
Piping Design & Drafting
Piping course is the complete curicullum of Pressure Piping Code, Upon
completion of the training course the participant shall be a complete piping
professional. The course curicullum is integrated with Process Plant Layout &
Equipments, Oil & Gas Pipeline Design, Process Piping Drafting, Liquid
Pipeline Hydraulics, & Fire Safety Piping.
 Fundamentals of piping
 ASME codes and standards
 Classification of pipe
 Piping Material Specifications – ASME / ASTM
 Calculation of standards property of piping materials
 Pipe Fittings
 Types of Flanges
 Types of Gaskets
 Types of Valves
 Mechanical and Process Equipment
 Flow Diagrams
 Piping Isometric
 Piping and Equipment Layout
 Pipe Supports
 P&ID

6. 2015www.gideindia.com
info@gideindia.com
Autodesk Revit is Building information modeling software for architects,
structural engineers, MEP engineers, designers and contractors. It allows
users to design a building and structure and its components in 3D, annotate
the model with 2D drafting elements and access building information from
the building models database. Revit is 4D BIM capable with tools to plan and
track various stages in the building's lifecycle, from concept to construction
and later demolition.

7. 2015www.gideindia.com
info@gideindia.com
Duration
The duration of this Training will be 4 months, properly divided into theory
and hands on real project scenarios.
Certification Policy
‘Certificate of Merit’ for all the course participants from G.I.D.E The first
American National Standard Institution (ANSI) ISO 9001:2008 Approved
Design & Engineering training Organization
At the end of this course, a project work out will be organized among the
participating students and will be awarded with a Certificate from
Scientific And Technical Education Development Council. STED Council
is an autonomous body, which recognized and registered NGO under
Government of India for Human Resource Development and ISO 9001-2008
certified. Autodesk Certified Revit MEP Certificate
Eligibility
This workshop is best suited for Electrical /Mechanical Engineering branch.
It's a basic Industrial level Training so there are no prerequisites. Anyone
interested, can join this Course
For more details and Admissions : 0 91 42 55 55 65
www.gideindia.com | info@gideindia.com | facebook.com/gidepage