This document provides information on various membrane types for syringe filters, including nylon, CA, PTFE, PVDF, PES, MCE. It discusses the properties of each membrane, including hydrophilicity, protein binding, chemical compatibility, temperature resistance and suitable applications. Product codes and specifications are provided for syringe filters with these different membrane types in 13mm, 25mm and 30mm diameters and 0.22 and 0.45 micrometer pore sizes.
SYNTHESIS OF SALICYLIC ACID –FORMALDEHYDE POLYMERSEDITOR IJCRCPS
Abstract Details of only typical methods are furnished. In other cases only the amount of the reactants used is given. Condensation
of salicylic acid (0.02 Mole) with formaldehyde (0.016 Mole) in presence of aqueous 40% H2SO4.
Keywords: Water bath, Thermometer, Spectrophotometer, Condensation.
SYNTHESIS OF SALICYLIC ACID –FORMALDEHYDE POLYMERSEDITOR IJCRCPS
Abstract Details of only typical methods are furnished. In other cases only the amount of the reactants used is given. Condensation
of salicylic acid (0.02 Mole) with formaldehyde (0.016 Mole) in presence of aqueous 40% H2SO4.
Keywords: Water bath, Thermometer, Spectrophotometer, Condensation.
The above Presentation discusses about the chapter polymers.Its definition, Types and important applications.It also covers about the process of bio degradation of polymers in the body.
packaging is the art and science of preparing articles for transport ,storage, display and use This is the process by which
pharmaceuticals are suitably placed so that they should retain their therapeutic effectiveness from time of their packaging till they are consumed A pharmaceutical pack contains , protect and deliver a safe ,efficacious drug product
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
formulation development of Transdermal drug delivery systems i.e. transdermal patches, compostion of transdermal patch, physical methods used to prepare tansdermal patch
Introduction
Need of Nanosuspension
Advantages of Nanosuspension
Disadvantages of Nanosuspension
Method Of Preparation
Formulation Considerations
Characterization of Nanosuspension
Current Marketed Formulations
Pharmaceutical Applications
The above Presentation discusses about the chapter polymers.Its definition, Types and important applications.It also covers about the process of bio degradation of polymers in the body.
packaging is the art and science of preparing articles for transport ,storage, display and use This is the process by which
pharmaceuticals are suitably placed so that they should retain their therapeutic effectiveness from time of their packaging till they are consumed A pharmaceutical pack contains , protect and deliver a safe ,efficacious drug product
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
These are the sterile preparation intended to administered other than intestinal route to bypass first pass metabolism and directly goes to systemic circulation.
These preparation give quick onset of action and site specific activity.
Suitable for drugs which are inactive in GIT environment.
Can be given unconscious or vomiting or diarrheal patient.
formulation development of Transdermal drug delivery systems i.e. transdermal patches, compostion of transdermal patch, physical methods used to prepare tansdermal patch
Introduction
Need of Nanosuspension
Advantages of Nanosuspension
Disadvantages of Nanosuspension
Method Of Preparation
Formulation Considerations
Characterization of Nanosuspension
Current Marketed Formulations
Pharmaceutical Applications
syringe filters are most common type of filtration devices in small scale applications.we use syringe filters mostly for preparing samples of HPLC, GC, Atomic Absorption and ...
depends on what solutions we use, different types of membranes apply in syringe filters.
please see this file to find out more about syringe filters.
فیلترهای سرسرنگی را میتوان محبوب ترین انواع فیلتر در کاربردهای آزمایشگاهی برشمرد. این فیلترها بیش از همه برای آماده سازی نمونه های کروماتوگرافی و جذب اتمی کاربرد دارند.
انواع مختلفی از ممبران (غشاء) با توجه به موادی که قرار است فیلتر شوند در فیلتر سر سرنگی به کار برده میشود. برای آشنایی بیشتر با انواع فیلترهای سرنگی این راهنما را مطالعه فرمایید.
Greyhound Chromatography's Q-Fil Syringe Filters set the new Quality standard for today’s laboratory syringe filters. Manufactured from the highest quality medical grade, high density polypropylene. Q-Fil Syringe Filters provide excellent chemical compatibility with acids, alcohols, bases, ethers, glycols, ketones and oils.
Every colour-coded filter is printed with details of the membrane material and its pore size on the outside of the filter and every box is labelled with the batch number making them ideal for traceability, GLPs and validation purposes.
CLEARYPLEAT-PES Series Pleated Filter Cartridges are manufactured to Industrial standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings these cartridges achieve high efficiency at rated microns.
Greyhound Chromatography's Q-Fil Membrane Filters set the new Quality standard for today’s analytical laboratories. Manufactured from the highest quality materials, Q-Fil Membrane Filters provide excellent chemical compatibility with acids, alcohols, bases, ethers, glycols, ketones and oils.
The main source of particle contamination in HPLC columns originate in the sample to be analysed. Using a syringe filter before the sample is injected into the analytical instrument ensures that the sample is at its purest before the analysis begins. Greyhound Chromatography offer a wide range of syringe filters, suitable for any sample analysis.
With the brand Albet LabScience, we are providing you with a wide range of products for challenging filtrations in chemical and
biological laboratories, as well as for life science and analytical applications. Our extensive portfolio of filter papers is known in
laboratories throughout the world for its purity and consistency.
As a globally operating company, Hahnemühle is focusing, in addition to the standard product range for laboratories, on the
production of filter papers that are tailored to the customers’ requirements, as part of its core business
The Claryfil Visco M cartridge filter is made entirely of molded layers, to provide excellent filtration capabilities for highly viscous liquids. It is engineered for applications that involve high temperature liquids and organic solvents. Olefin filters are not suitable for such applications, here the Claryfil Visco M variant fills the gap. The variant has a polyester medium and is designed to meet diverse process requirements. The molded layers of the spun cartridge filter provide structural support to the filter. The filter variant is manufactured for a controlled gradient porosity, this not only enhances the filtration capabilities of the variant but also extends the service life of the variant.
syringe filters are most common type of filtration devices in small scale applications.we use syringe filters mostly for preparing samples of HPLC, GC, Atomic Absorption and ...
depends on what solutions we use, different types of membranes apply in syringe filters.
please see this file to find out more about syringe filters.
Greyhound Q-Fil Membrane Filters are one of the worlds most popular ranges of Membrane Filters for environmental, industrial, water, food, chemical and biotechnology laboratories.
These high quality membranes are manufactures to the highest specifications to meet the varying requirements of the scientific community.
Determination of Common Counterions and Impurity Anions in Pharmaceuticals Using a Capillary HPIC System with Suppressed Conductivity and Charge Detection
Recently, identification and quantification of ions in early stage drug development has gained increasing attention, because the APIs maybe contaminated with different counter ions from synthesis steps, and because selecting the counter ion to enhance APIs’ solubility and stability is becoming a key step in formulation development. This presentation demonstrates the identification and quantification of 22 commonly found anions in pharmaceuticals in a single run using a high-pressure capillary IC system (HPIC) with 4-μm particle ion –exchange column, and CD-QD dual detectors.
GE Healthcare / Whatman Filtration Brochure Special OffersLab Unlimited
Special prices available on GE Healthcare filtration products.
Lab Unlimited are delighted to offer up to 50% discount on GE / Whatman filtration membranes in this promotion brochure.
Buy these laboratory supplies online at www.labunlimited.com/promotions
Offers valid until December 31st, 2016.
This product guide covers the basics of Millipak® Final Fill Filters. Learn how to maximize product recovery and enhance protection of your high value product.
PFA Filter is a special product used in microelectronics and chemical filtration. Cobetter Filtration manufcture equivalent PFA All-teflon Filter as Parker and Pall.
High Flow Filter for UPW Applications – A Field Case Studygvanscho
Presentation reviews the performance of a newly developed 20 nm filter installed in a ultrahigh purity water system. Presented at the the Executive Forum at ULTRAPURE WATER Micro 2008, Phoenix, AZ, November 11-12, 2008.
Hahnemühle‘s Albet LabScience brand is a range of products designed for general filtration applications and complex filtration processes in life science and analytical applications in chemical and biological laboratories. The technical specifications of our membranes and syringe filters allow their use in areas where reproducibility and consistency are of major importance.
Quality
Our syringe filters undergo strict quality controls during and after production. The storage life of the finished products in the
warehouse is constantly monitored. Each filter holder undergoes the following five tests: bubble point, burst pressure, membrane absorption, flow rate and extractable substances. The range includes filter holders for the reliable separation of microorganisms and particles in liquids, air and other gases. Clear and sterile filtration, sample production, sterile aeration and medical applications are just some of the areas where disposable filter holders are typically used. They are available in different pore sizes and with different hydrophilic or hydrophobic membrane materials.
Our microfiltration range also includes membrane units. The first step towards successful analysis is choosing the right membrane unit. We offer you different membrane filters with pore sizes from 0.2 μm – 8 μm for particle removal or for the collection of the microorganisms to be examined from solutions. Various cellulose-based membranes and polymer materials cover a wide range of application areas, from clarification and sample preparation to sterile and air filtration to aeration and microbiological control. See our quick and easy to use guidelines on page 8f, which will help you to decide which product is perfect for you.
Air filter elements manufacturer from Chinajiang12707070
Send E-mail to us: info@thenow.cn
Our company is in Shanghai, the economics and financial center of China.
Welcome you contact us and check our ability.
Add: No.358 XinqinRoad,Nanxiang Town,Jiading District,Shanghai,China
Service hotline: 400-876-1888
Tel: +86-21-51082108*802(ext.)
Fax: +86-21-66613500
Email: info@thenow.cn
SKYPE: thenow.nina
Website: www.thenowfilter.com
Looking for a reliable hepa filter cleanroom pharmaceutical setup and the semiconductor industry? Look no further than SBRG Cleantech. Our expertise ensures a pristine and controlled environment for your semiconductor operations. Contact us today for top-notch cleanroom solutions.
1. 6
Membrane Selection Guide
Nylon CA(Cellulose acetate)
• Hydrophilic property
• Ideal for aqueous(Non-acidic) or organic sample
• High protein binding, Not used when protein recovery is
important, Commonly used to for general lab filtration of
HPLC
Reference Chart of Membrane Filter
• Naturally Hydrophilic
• Low protein binding suitable for aqueous samples
• Nitrate free suitable for ground water filtration
• Excellent choice for maximum protein recovery, bind less
protein than PVDF
• Ideal for tissue culture media and sensitive biological
sample
PTFE(Polytetrafluoroethylene) PES(Polyethersulfone)
Hydrophobic PTFE
• Strong hydrophobic
• Strong chemical stability and inertia
• Strong acid and alkali solvent filtration
• Chemical resistance to all solvent, Ideal for filtering gas
Hydrophilic PTFE
• Inorganic solvent with strong chemical causticity filtration
• Mixed solvent filtration in HPLC(Acetonitrile/Water)
• Alkali solvent filtration
• Lowest protein binding
• Low binding of protein and nucleic acid, faster than
PVDF, excellent flow rates
• Suitable filtration for tissue culture media
• Broad chemical resistance , aggressive solvents
PVDF(Polyvinylidene difluoride) MCE(Mixed cellulose ester)
• Good heat endurance and chemical stability
• Strong hydrophobic, Non Aggressive aqueous, mild
organic solutions, Solvent mixture
• Extremely low protein binding
• HPLC sample, general biological filtration
• Filtration of aqueous sample, effectively bind trace
protein
• Little resistance
• Oil, Alcohol, and bacteria filtration and then inspect,
Particle Analysis Microbiology
PP(Polypropylene) GMF
• Naturally hydrophilic membrane, Wide range of chemical
compatibility to organic solvents
• Low no-specific absorbing membrane for maximum
protein recovery in critical analysis
• Suited for biological sample filtration
Designed specially to filter high particulate solutions. With
four layers, the first filter is a composite membrane of 10μm
glass fiber and 1.0μm PP, the second prefilter is 0.7μm GF/F
membrane media, the last one is filtration media as speci-fied.
Step-1 Determine whether required prefiltration Syringe Filter with PP Prefilter
Step-2 Choose the suitable Membrane Filtration Medium. by Characteristics of Samples
Aqueous Non-Polar Protein
MCE/CA/NY PTFE/PVDF/NY PES/PVDF
Step-3 Choose the suitable diameter. by Volume of Samples
<10ml <100ml <250ml
13mm 25mm 30mm
Step-4 Choose the suitable Pore Size. by size of Target compounds
>3um <3um
0.45um 0.22um
To Place an Order or Receive
Technical Assistance
+98-21-22024327-8 Ext 612
Arash Abed
Mobile: 09128911277
Email: abed@mabnateyf.com
2. FUTECS your chromatography specialist
www.futecs.com 7
Chemical Compatibility Chart for Syringe Filters
NY PTFE PVDF PP REG PES CA
ACIDS
Acetic, Glacial L C C C C N N
Acetic, 25% C C C C C C C
Formic, 25% N C C C C - L
Hydrochloric, 25% N C C C N C N
Nitric, 25% N C C C N - N
Phosphoric, 25% N C C C L - C
Sulfuric, 25% N C C C N - N
Trichloroacetic, 10% N C - - C - C
ALCOHOLS
Amyl Alcohol, Butanol C C L C C L C
Benzyl Alcohol C C C C C N L
Ethanol, 70% L C C C C C C
Ethanol, 98% C C C C C C C
Ethylene Glycol C C C C C C C
Glycerol C C C C C C C
Isopropal, n-Propanol C C C C C C C
Methanol, 98% C C C C C C C
Propylene Glycol C C C C C C L
ALKALIES
Ammonium Hydroxide, 25% C C C C L C C
Sodium Hydroxide 3 Normal C C C C L - N
HYDROCARBONS
Hexane C C C N C L C
Sodium C C C N C C C
Toluene, Benzene C C C N C S C
HALOGENATED HYDROCABONS
Carbon Tetrachloride C C C L C C L
Chloroform C C C L C N N
Methylene Chloride L C C L C N N
Monochlorobenzene, Freon C C C C C - C
Trichloroethylene C C C C C N C
KEYTONES
Acetone, Cyclohexanone C C C C C N N
Methy Ethyl Ketone C C L L C N L
Methyl Isobutyl Ketone - C N L C - -
ESTERS
Amyl Acetate C C L L C - L
Butyl Acetate C C L L C - L
Ethyl acetate, Methyl acetate C C L L C N N
Propyl Acetate C C L L C - L
OXIDES - ETHERS
Dimethylsulfoxide (DMSO) - E N C C N N
Dioxane and Tetrahydrofuran C E N C C - N
Ethyl Ether C E C L C C C
SOLVENTS WITH NITROGEN (AMIDES)
Acetonitrile C E L C C L N
Aniline - - N - C - N
Diethylacetamide C - N - C - N
Dimethyl Formamide L N N C L - N
Pyridine C L S N C L N
MISCELLANEOUS
Formaldehyde Solution, 30% C C C C L C L
Hydrogen Peroxide, 30% N C C C C C C
Phenol, Aqueous, 10% N C L C N N N
*N =Not Compatible
C =Compatible
L =Limited Compatibility. May be okay for small volumes and/or short term contact.
3. 8
Sample Syringe Filter
Syringe filters are simply quality filters, well packaged,
and offered at a fair and competitive price. The Classic
range is available in all of the major membranes including
Nylon, CA, PP, Glass Fiber, PTFE, PES, MCE and PVDF which
are supplied in 13mm, 25mm and 17mm, 30mm formats
in virgin plypropylene housings
4. FUTECS your chromatography specialist
9
www.futecs.com
I. Sample Preparation
Superpure -Syringe Filter
• Larger filtration area(Diameter) : 17mm, 30mm
• Increase sample volume throughput
• High reducing pressure
• Designed to speed up membrane flow rate
• Nylon, Hydrophobic-PTFE, Hydrophiliic-PTFE, PVDF, PES, MCE
• Pore Size; 0.22um, 0.45um
• Color Housing Designed
Chrompure -Syringe Filter
• High quality membrane
• Gear rim ring for better handling
• Improved membrane flow rate
• Membrane Materials; Nylon, PTFE, PVDF, CA, PES, MCE, GF
• Pore Size; 0.22um, 0.45um
• Size(Diameter); 13mm, 25mm
• Color Housing Design
Simplepure -Syringe Filter
• Specially designed to maximize sample recovery
• Minimum sample hold-up
• High quality membrane
• Improved membrane flow rate
• Materials; Nylon, Hydrophobic-PTFE, Hydrophilic-PTFE,
PVDF, CA, PES, MCE
• Pore Size; 0.22um, 0.45um, Available 0.8 - 5um
• Size(Diameter); 13mm, 25mm
• Housing; Natural white, Virgin medical polypropylene housing
5. Non-Sterile Syringe Filter
10
I. Sample Preparation
MS LLC
Nylon Syringe Filter (Polyamide)
• Hydrophilic property
• No need to moist beforehand
• Uniform aperture
• Strong tenacity and adsorbability
• Compatible with aqueous and alcoholic solutions and solvents; suitable for HPLC
Parameter 13mm 25mm 30mm
Material Nylon Nylon Nylon
Housing material PP PP PP
Filtration area(cm2) 0.65 3.90 4.60
Pore size(um) 0.22, 0.45 0.22, 0.45 0.22, 0.45
Holdup volume(ul) <10 <30 <55
Sample volume(ml) <12 <100 <140
Max. Operation Temp 100 100 100
Max. pressure(psi) 75 95 110
pH 3-12 3-12 3-12
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFNY013022NC Nylon 0.22 13 No 100
SFNY013045NC Nylon 0.45 13 No 100
SFNY013022N Nylon 0.22 13 No 100
SFNY013045N Nylon 0.45 13 No 100
SFNY025022NC Nylon 0.22 25 No 100
SFNY025045NC Nylon 0.45 25 No 100
SFNY025022N Nylon 0.22 25 No 100
SFNY025045N Nylon 0.45 25 No 100
SFNY017022N Nylon 0.22 17 No 100
SFNY017045N Nylon 0.45 17 No 100
SFNY030022N Nylon 0.22 30 No 100
SFNY030045N Nylon 0.45 30 No 100
6. FUTECS your chromatography specialist
11
www.futecs.com
I. Sample Preparation
PVDF Syringe Filter(Polyvinylidene Fluoride)
• Good heat-endurance chemical stability
• Strong hydrophobiclity filters
• Widely used in gas filtration, vapor filtration, high-temperature
• Food industry
• Medicine filtration
Parameter 13mm 25mm 30mm
Material PVDF PVDF PVDF
Housing material PP PP PP
Filtration area(cm2) 0.65 3.90 4.60
Pore size(um) 0.22, 0.45 0.22, 0.45 0.22, 0.45
Holdup volume(ul) <10 <30 <55
Sample volume(ml) <12 <100 <140
Max. Operation Temp 100 100 100
Max. pressure(psi) 50 95 110
pH 1-14 1-14 1-14
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFPVDF013022NC PVDF 0.22 13 No 100
SFPVDF013045NC PVDF 0.45 13 No 100
SFPVDF013022N PVDF 0.22 13 No 100
SFPVDF013045N PVDF 0.45 13 No 100
SFPVDF025022NC PVDF 0.22 25 No 100
SFPVDF025045NC PVDF 0.45 25 No 100
SFPVDF025022N PVDF 0.22 25 No 100
SFPVDF025045N PVDF 0.45 25 No 100
SFPVDF017022N PVDF 0.22 17 No 100
SFPVDF017045N PVDF 0.45 17 No 100
SFPVDF030022N PVDF 0.22 30 No 100
SFPVDF030045N PVDF 0.45 30 No 100
7. Non-Sterile Syringe Filter
12
I. Sample Preparation
MS LLC
Hydrophobic PTFE Syringe Filter(Polyfluortetraethylene)
• Broad chemical compatibility
• Strong chemical stability and inertia
• Strong hydrophobicity
• Organic solvent with strong chemical causticity filtration
• Strong acid solvent filtration
• Alkali solvent filtration
Parameter 13mm 25mm 30mm
Material PTFE PTFE PTFE
Housing material PP PP PP
Filtration area(cm2) 0.65 3.90 4.60
Pore size(um) 0.22, 0.45 0.22, 0.45 0.22, 0.45
Holdup volume(ul) <10 <30 <55
Sample volume(ml) <12 <100 <140
Max. Operation Temp 130 130 130
Max. pressure(psi) 130 130 130
pH 1-14 1-14 1-14
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
Hydrophobic PTFE
SFPTFE013022NBC PTFE 0.22 13 No 100
SFPTFE013045NBC PTFE 0.45 13 No 100
SFPTFE013022NB PTFE 0.22 13 No 100
SFPTFE013045NB PTFE 0.45 13 No 100
SFPTFE025022NBC PTFE 0.22 25 No 100
SFPTFE025045NBC PTFE 0.45 25 No 100
SFPTFE025022NB PTFE 0.22 25 No 100
SFPTFE025045NB PTFE 0.45 25 No 100
SFPTFE017022NB PTFE 0.22 17 No 100
SFPTFE017045NB PTFE 0.45 17 No 100
SFPTFE030022NB PTFE 0.22 30 No 100
SFPTFE030045NB PTFE 0.45 30 No 100
8. FUTECS your chromatography specialist
13
www.futecs.com
I. Sample Preparation
Hydrophilic PTFE Syringe Filter
Syringe filters are using special hydrophilic PTFE membrane as the filter medium.
This material has a maximal chemical and pH resistance, and optically clear when
wet with water. Hydrophilic PTFE syringe filter is a versatile filter for aqueous and
aggressive organic solvent-based solutions, and especially ideal for HPLC
operation. Pure polypropylene housings and color-coding housings include
smooth rim or gear rim are all available
Features
• Low protein binding fine particle removal from aqueous and organic solutions.
• Accurate analysis HPLC certified for low levels of UV-absorbing extractables.
• High flow rates with minimal aqueous extractables.
• Low surface friction coefficient: 0.1.
• Wide range of working temperature:180-260℃
Application
• Highly recommended for filtering HPLC samples and mobile phases.
• Organic solvent with strong chemical causticity filtration
Cross Reference
Company Product Description
MS Hydrophilic PTFE
syringe filter
A versatile filter for aqueous and aggres-sive
organic solvent-based solutions and
especially ideal for HPLC operation.
Pall GHP syringe filter Hydrophilic PP membrane media. Highly
recommended for filtering HPLC samples
and mobile phases.
Millipore Millex-GV Hydrophilic PVDF membrane media.
Preparation of protein-containing
Millex-HV solutions prior to chromatography
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
Hydrophilic PTFE
SFPTFE013022NLC PTFE 0.22 13 No 100
SFPTFE013045NLC PTFE 0.45 13 No 100
SFPTFE013022NL PTFE 0.22 13 No 100
SFPTFE013045NL PTFE 0.45 13 No 100
SFPTFE025022NLC PTFE 0.22 25 No 100
SFPTFE025045NLC PTFE 0.45 25 No 100
SFPTFE025022NL PTFE 0.22 25 No 100
SFPTFE025045NL PTFE 0.45 25 No 100
SFPTFE017022NL PTFE 0.22 17 No 100
SFPTFE017045NL PTFE 0.45 17 No 100
SFPTFE030022NL PTFE 0.22 30 No 100
SFPTFE030045NL PTFE 0.45 30 No 100
9. Non-Sterile Syringe Filter
14
I. Sample Preparation
MS LLC
PES Syringe Filter(Polyether Sulfone)
• Hydrophilic, low protein binding,
• Low extractable
• High throughput
• Tissue culture media filtration
• Tissue culture additive filtration
• Low affinity for proteins and extractable with substantially faster flow rates than PVDF
Parameter 13mm 25mm 30mm
Material PES PES PES
Housing material PP PP PP
Filtration area(cm2) 0.65 3.90 4.60
Pore size(um) 0.22, 0.45 0.22, 0.45 0.22, 0.45
Holdup volume(ul) <10 <30 <55
Sample volume(ml) <12 <100 <140
Max. Operation Temp 90 90 90
Max. pressure(psi) 50 95 120
pH 1-14 1-14 1-14
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFPES013022NC PES 0.22 13 No 100
SFPES013045NC PES 0.45 13 No 100
SFPES013022N PES 0.22 13 No 100
SFPES013045N PES 0.45 13 No 100
SFPES025022NC PES 0.22 25 No 100
SFPES025045NC PES 0.45 25 No 100
SFPES025022N PES 0.22 25 No 100
SFPES025045N PES 0.45 25 No 100
SFPES017022N PES 0.22 17 No 100
SFPES017045N PES 0.45 17 No 100
SFPES030022N PES 0.22 30 No 100
SFPES030045N PES 0.45 30 No 100
10. FUTECS your chromatography specialist
15
www.futecs.com
I. Sample Preparation
MCE Syringe Filter (Mixed Cellulose Ester)
• Uniform aperture,
• No medium dropping
• Naturally hydrophilic
• Filtration of aqueous solutions; effectively binds trace proteins.
Parameter 13mm 25mm 30mm
Material MCE MCE MCE
Housing material PP PP PP
Filtration area(cm2) 0.65 3.90 4.60
Pore size(um) 0.22, 0.45 0.22, 0.45 0.22, 0.45
Holdup volume(ul) <10 <30 <55
Sample volume(ml) <12 <100 <140
Max. Operation Temp 110 110 110
Max. pressure(psi) 120 120 120
pH 4-8 4-8 4-8
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFMCE013022NC MCE 0.22 13 No 100
SFMCE013045NC MCE 0.45 13 No 100
SFMCE013022N MCE 0.22 13 No 100
SFMCE013045N MCE 0.45 13 No 100
SFMCE025022NC MCE 0.22 25 No 100
SFMCE025045NC MCE 0.45 25 No 100
SFMCE025022N MCE 0.22 25 No 100
SFMCE025045N MCE 0.45 25 No 100
SFMCE017022N MCE 0.22 17 No 100
SFMCE017045N MCE 0.45 17 No 100
SFMCE030022N MCE 0.22 30 No 100
SFMCE030045N MCE 0.45 30 No 100
11. Non-Sterile Syringe Filter
16
I. Sample Preparation
MS LLC
CA Syringe Filter (Cellulose Acetate)
• Ideal for aqueous, biological or protein filtration
• Naturally hydrophilic
• Nitrate free: suitable for groundwater filtration
• Cell retention and particle collection
• Filtration for aqueous sample and some organic solvents
Parameter 13mm 25mm 30mm
Material CA CA CA
Housing material PP PP PP
Filtration area(cm2) 0.65 3.90 4.60
Pore size(um) 0.22, 0.45 0.22, 0.45 0.22, 0.45
Holdup volume(ul) <10 <30 <55
Sample volume(ml) <12 <100 <140
Max. Operation Temp 50 50 50
Max. pressure(psi) 120 120 120
pH 3-7 3-7 3-7
Ordering informations
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFCA013022NC CA 0.22 13 No 100
SFCA013045NC CA 0.45 13 No 100
SFCA013022N CA 0.22 13 No 100
SFCA013045N CA 0.45 13 No 100
SFCA025022NC CA 0.22 25 No 100
SFCA025045NC CA 0.45 25 No 100
SFCA025022N CA 0.22 25 No 100
SFCA025045N CA 0.45 25 No 100
SFCA017022N CA 0.22 17 No 100
SFCA017045N CA 0.45 17 No 100
SFCA030022N CA 0.22 30 No 100
SFCA030045N CA 0.45 30 No 100
12. FUTECS your chromatography specialist
17
www.futecs.com
I. Sample Preparation
PP Syring Filter (Polypropylene)
• Naturally hydrophilic membrane
• Wide range of chemical compatibility to organic solvents
• Highly solvent resistant
• Low no-specific absorbing membrane for maximum protein recovery in critical analysis
Ordering informations
Cat. No. Filter
Medium
Glass Fiber Syringe Filter
• Hydrophilic Material Membrane
• Excellent compatibility with organic solvents and strong acids
(apart from hydrofluoric acid) and bases
• High dirt-handling capacity.
Ordering informations
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFPP013022N PP 0.22 13 No 100
SFPP013045N PP 0.45 13 No 100
SFPP025022N PP 0.22 25 No 100
SFPP025045N PP 0.45 25 No 100
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFGF013070N Glass Fiber 0.7 13 No 100
SFGF013100N Glass Fiber 0.1 13 No 100
SFGF025070N Glass Fiber 0.7 25 No 100
SFGF025100N Glass Fiber 0.1 25 No 100
13. Non-Sterile Syringe Filter
18
I. Sample Preparation
MS LLC
Syringe Filter with Prefilter
Syringe filters with prefilter are purpose-built with features designed to bring
the highest levels of performance and purity to your research. We incorporate
a variety of membranes to offer separation and purification solutions for the
majority of your laboratory needs. Syringe filter with prefilter prevents
blockage and bursting of the actual membrane for the fine filtration.
• Improve sample volume throughout with prefilter
• High particulate load
• Exceptionally low extractable level with no wetting agents utilized
Nylon with PP Prefilter
Cat. No. Filter
Medium
PTFE with PP Prefilter
Cat. No. Filter
Medium
Pore
Size(μm)
SFPTFE013022NP PTFE/PP 0.22 13 No 100
SFPTFE013045NP PTFE/PP 0.45 13 No 100
SFPTFE025022NP PTFE/PP 0.22 25 No 100
SFPTFE025045NP PTFE/PP 0.45 25 No 100
PVDF with PP Prefilter
PES with PP Prefilter
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFNY013022NP NY/PP 0.22 13 No 100
SFNY013045NP NY/PP 0.45 13 No 100
SFNY025022NP NY/PP 0.22 25 No 100
SFNY025045NP NY/PP 0.45 25 No 100
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Diameter
(mm)
Gama
Sterile Qty/pack
Gama
Sterile Qty/pack
SFPVDF013022NP PVDF/PP 0.22 13 No 100
SFPVDF013045NP PVDF/PP 0.45 13 No 100
SFPVDF025022NP PVDF/PP 0.22 25 No 100
SFPVDF025045NP PVDF/PP 0.45 25 No 100
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFPES013022NP PES/PP 0.22 13 No 100
SFPES013045NP PES/PP 0.45 13 No 100
SFPES025022NP PES/PP 0.22 25 No 100
SFPES025045NP PES/PP 0.45 25 No 100
14. FUTECS your chromatography specialist
19
Diameter
(mm)
Gama
Sterile Qty/pack
SFPTFE013022NG PTFE/GF 0.22 13 No 100
SFPTFE013045NG PTFE/GF 0.45 13 No 100
SFPTFE025022NG PTFE/GF 0.22 25 No 100
SFPTFE025045NG PTFE/GF 0.45 25 No 100
www.futecs.com
I. Sample Preparation
Nylon with Glass Fiber Prefilter
Cat. No. Filter
Medium
Pore
Size(μm)
PTFE with Glass Fiber Prefilter
Cat. No. Filter
Medium
Pore
Size(μm)
PVDF with Glass Fiber Prefilter
PES Glass Fiber Prefilter
Diameter
(mm)
Gama
Sterile Qty/pack
SFNY013022NG NY/GF 0.22 13 No 100
SFNY013045NG NY/GF 0.45 13 No 100
SFNY025022NG NY/GF 0.22 25 No 100
SFNY025045NG NY/GF 0.45 25 No 100
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFPVDF013022NG PVDF/GF 0.22 13 No 100
SFPVDF013045NG PVDF/GF 0.45 13 No 100
SFPVDF025022NG PVDF/GF 0.22 25 No 100
SFPVDF025045NG PVDF/GF 0.45 25 No 100
Cat. No. Filter
Medium
Pore
Size(μm)
Diameter
(mm)
Gama
Sterile Qty/pack
SFPES013022NG PES/GF 0.22 13 No 100
SFPES013045NG PES/GF 0.45 13 No 100
SFPES025022NG PES/GF 0.22 25 No 100
SFPES025045NG PES/GF 0.45 25 No 100
To Place an Order or Receive
Technical Assistance
+98-21-22024327-8 Ext 612
Arash Abed
Mobile: 09128911277
Email: abed@mabnateyf.com