Mohammed Omer is a mechanical engineer seeking a position in HVAC projects and customer service. He has over 10 years of experience in HVAC design and project management. Some of the key projects he has worked on include a 500 million AED residential and commercial development with 11 towers, and a 1.6 billion AED expansion of Dubai International Airport. Currently he is working on infrastructure projects at Dubai International Airport. He holds a Bachelor's degree in Mechanical Engineering and is pursuing an MBA in Operations Management.
Pankaj Resume - Construction Project ManagerPankaj Singh
8+ years of Civil Engineering experience and 5.5 years of experience in Information Technology (Legacy Applications) with 5 years of onsite (USA) experience
SUMMARY OF SKILLS
Expertise in Estimation softwares like HIT Office etc.
MS Office Proficient
Excellent in Internet and email communication
Knowledge of AUTOCAD and Primavera - P6
Team Building & Leadership
Construction Planning & Scheduling
Quality Assurance (QA) & Quality Control (QC) eviews, using Root Cause Analysis
Communication management
Safety & Compliance Management
Vendor & Materials Management
HR management
Excellent Interpersonal skills
Pankaj Resume - Construction Project ManagerPankaj Singh
8+ years of Civil Engineering experience and 5.5 years of experience in Information Technology (Legacy Applications) with 5 years of onsite (USA) experience
SUMMARY OF SKILLS
Expertise in Estimation softwares like HIT Office etc.
MS Office Proficient
Excellent in Internet and email communication
Knowledge of AUTOCAD and Primavera - P6
Team Building & Leadership
Construction Planning & Scheduling
Quality Assurance (QA) & Quality Control (QC) eviews, using Root Cause Analysis
Communication management
Safety & Compliance Management
Vendor & Materials Management
HR management
Excellent Interpersonal skills
The aim of this report is to introduce developers to the world of Magento optimization, giving suggestions and practical examples of the best practices to apply.
In this highly informative session, Tony will leverage PMI research findings to explore the primary issues and opportunities in innovation project management. Innovation is a critical element in helping product-oriented companies achieve their market objectives and projects in these environments are development are complex, long, resource-intensive, and risky. Therefore, it is important to detect problems early to avoid waste of time and resources. Because that is often easier said than done, Tony will couple PMI’s research with observations from his company’s client interactions in the field to help session attendees fully comprehend each of the top five innovation project management issues.
By the end of the presentation, participants will have a very clear understanding of the specific challenges that plague low-performing organizations and the best practice activities that characterize their high-performing counterparts. The costs and benefits of employing these best practices in organizations where they do not yet exist will also be provided, as will be lessons learned from performance improvement efforts in innovation environments. If you want to understand how to assist an organization with improving time-to-market success rates, increase the value of product development efforts, and maximize opportunity in the world of innovation, this session is for you.
Candidate with thorough knowledge about principles of M.E.P Design, engineering specifications and safety systems, seeks to work as a HVAC Design engineering for a reputed organization.
Candidate with thorough knowledge about principles of M.E.P Design, engineering specifications and safety systems, seeks to work as a HVAC Design engineering for a reputed organization.
Resume- Mechanical Engineer 8 Years Experience in Pipeline construction and manufacturing Industries Including support services for Construction, Manufacturing, Quality Assurance and Equipment selection, Project Deliverables as well as with good Techno commercial Acumen.
Seeking an opportunity to work as Mechanical engineer, to obtain and secure position that will enable me to use my expertise and skills as well as my ability to work as a proactive member of a team. I am looking forward to work in suitable environment that would improve my technical skills and raise my knowledge.
1. Page 1 of 4
Mohammed Omer
Email: mohammadomar86@gmail.com
Mobile: +97150-4399785
Objective:-Seeking for a challenging career opportunity to prove my skill and ability in the field of
Heating Ventilation and Air Conditioning Projects and customer service by contributing continuously
towards the development of the company and to capitalize my strength in MEP field.
Previous Professional Work Experience
Organization: Emirates Trading Agency (ETA) From May 2008-Oct 2012
Projects handled
1- Project Name : 11 Towers Residential and Commercial high rise buildings
Designation : Site engineer
Building Type : Residential and Commercial high rise building
MEP Project Value : AED 500 Million
Client : M/s. Dubai properties
Main contractor : M/s. IBA
MEP Consultants : M/s WS Atkins
2- Project Name : Dubai International Airport Concourse III
Designation : Project engineer
MEP Project Value : AED 1.6 Billion
Client : DCA
Main Contractor : M/s. ALEC
MEP Consultants : M/s. Dar al Handasah
Organization: Al futtaim Engineering Nov-2012 –Oct 2014
3- Project Name : Dubai Tram
Designation : Project engineer-HVAC & Plumbing
MEP Project Value : AED 50 million
Client : Road and transport authority
Main Contractor : M/s.Alstom-Besix consortium
MEP Consultants : M/s. Systra
HVAC job Responsibilities:
Preparation of cooling load calculations using HAP 4.4,
Chilled water pipe sizing with CIBSE and ASHRAE standard.
Duct sizing with as per ASHRAE standard. And preparation of HVAC plant room such as AHU
room, chilled water pump room,
Preparation of chiller plant room detail and sections,
2. Page 2 of 4
Preparation of MEP detailed shop drawings,Co-ordination drawings and as built drawings.
Sizing & selection of Air terminal devices: Grilles, Diffusers, Louvers, etc as per Design
parameters.
External static pressure calculation for exhaust fans, AHUs and FAHUs. Head calculation for
chilled water pumps.
Expansion Tank size calculations.
Staircase pressurization fan sizing calculations.
Preparation of material submittals for the project requirement and submitting for consultants
approval
Coordinating with vendors for the selection of equipment’s like Chiller, AHU, FCU, Pumps and
Fans in accordance with the project design and specification.
Carry out testing and commissioning for HVAC systems and coordinate with consultant for
approval
Prepare/Verify designs and convert them in to site worthy shop drawings, highlight and clarify
discrepancies with client/Designers,
Coordinate with Architects and Consultants to resolve the discrepancies arising from site
conditions and give the required feedback to civil contractor in order to facilitate accommodation
of MEP service,
Study the approved project program and prepare weekly plans, plan and mobilise required
materials and resources, track the progress and monitor the material and resource utilization,
prepare and discuss weekly progress dash boards with planning engineer and project manager,
Prepare work method statement for each activity in accordance with the installation and safety
standards analyze risks using standard procedures and compile risk assessment sheet, ensure
the implementation of the method statements and risk mitigation measures,
Executing Project fully in line with labour and material allowances and approved budgeted costs,
verify quantities from drawings and ensure materials are in line with the project requirements and
specifications and highlight any variations occurring from design changes from contract scope,
Liaise with main contractor to give feedback for the conflict zones arising from MEP services and
make recommendation for smooth allowance,
Prepare and submit monthly valuations and certifications from client.
Plumbing job responsibilities
Installation of Pumping systems, Portable Water supply, Internal drainage, External drainage and
Sanitary wares
Preparation of booster pump pressure loss calculations
Preparation of portable water supply demand calculations using IPC & CIBSE standards.
Water hammer arrestor and electric water heater sizing calculations using IPC standards.
Underground and Elevated tank sizing calculation and selection,
Preparation of Shop-Drawings and “MEP Co-ordination Drawing”.
Preparation of "As-Built Drawings" and O & M Manuals.
Preparation of Engineering /Material submittals, Vendor approvals, RFI’s /ITP’s/ Method
Statement.
Carry out T&C for plumbing systems.
Coordinate with Consultant to get periodic approvals
3. Page 3 of 4
Current Work Experience: -
At present working with Reputed Electromechanical Building services Company Transgulf
Electromechanical from- Nov 2014 to as on date.
Project : Dubai International airport infrastructure development works
Designation : Mechanical Engineer
Consultant : Dar-Al-Handasah
Main Contractor : Al Naboodah Constructions
Job responsibilities
Installation of Pumping station for the supply of portable water to the building network
Installation of Package units for the airport utility buildings.
Installation of underground drainage and water supply piping network
Carry out testing and commissioning for the installed system and coordinate with consultant for approval
Preparation of shop drawing and submission of consultant approval.
Coordinating with vendor for preparation material submittal in line with the project specifications.
QUALIFICATION:-
B.E. (Mechanical Engineering) completed in the year 2007 from ANNA University, Chennai,
India, with (72 %) First Class.
Pursuing MBA in operations management
H S C from IBHS school,Melvisharam with 78 % (First class)
S S L C from IBHS school,Melvisharamwith 69 % (First class)
Additional Qualification: -
Strategic procurement and purchasing(Training conducted by Dubai institute of business
management).
Logistics and inventory control(Training conducted by Dubai institute of business management).
Training Courses / Seminars Attended: -
Benchmarking
Heat Load Calculation
HVAC Duct Design
HVAC Equipment Selection
ESP(External Static Pressure) Calculation
Building Management System
Assertiveness
Presentation Skills
Emotional Intelligence
Time Management
4. Page 4 of 4
COMPUTER KNOWLEDGE
Extensive working knowledge of
Microsoft Office
AUTOCAD 2000.
PERSONAL DETAILS
Date of Birth : 04th
November 1985
Nationality : Indian
Permanent Address : No:-3 Appa pillai st,
Melvisharam, Vellore Dt,
Tamil Nadu, India
Marital Status : Married
Passport No : G - 7165647.
Visa Status : Employment Visa
Driving License : Valid UAE Driving License till 2022.
This is the true cop of my C.V. Should you require any further information regarding my testimonials. I
will be highly obliged to present the same upon request or at the time of interview.
Mohammed Omer