This document outlines the experiments to be conducted for the ME P33 Electrical and Electronics Lab course at Manakula Vinayagar Institute of Technology. The course objectives are to analyze the performance of transformers, AC and DC electrical machines, and to analyze inverting/non-inverting amplifiers, astable multivibrators, and counters using operational amplifiers. The document lists 10 required experiments involving tests on single and three-phase transformers, induction motors, power measurement, alternator voltage regulation, inverting/non-inverting amplifiers, adders/subtractors, astable multivibrators, and counters using integrated circuits. It also includes a manual index listing the experiments, their page numbers, and theoretical background
Unknown input observer for a novel sensorless drive of brushless dc motorsAsoka Technologies
In this paper, a novel motor control method is proposed to improve the performance of sensorless drive of BLDC motors. In the terminal voltage sensing method, which is a great portion of sensorless control, a precise rotor position cannot be obtained when excessive input is applied to the drive during synchronous operation mode. Especially in the transient state, the response characteristic decreases. To cope with this problem, the unknown input (back-EMF) is modelled as the additional state of system in this paper. Taking into account the disturbance adopted by the back-EMF, the observer can be obtained by an equation of the augmented system. An algorithm to detect the back-EMF of a BLDC motor using the state observer is constructed. As a result, a novel sensorless drive of BLDC motors that can strictly estimate rotor position and speed is proposed.
Unknown input observer for a novel sensorless drive of brushless dc motorsAsoka Technologies
In this paper, a novel motor control method is proposed to improve the performance of sensorless drive of BLDC motors. In the terminal voltage sensing method, which is a great portion of sensorless control, a precise rotor position cannot be obtained when excessive input is applied to the drive during synchronous operation mode. Especially in the transient state, the response characteristic decreases. To cope with this problem, the unknown input (back-EMF) is modelled as the additional state of system in this paper. Taking into account the disturbance adopted by the back-EMF, the observer can be obtained by an equation of the augmented system. An algorithm to detect the back-EMF of a BLDC motor using the state observer is constructed. As a result, a novel sensorless drive of BLDC motors that can strictly estimate rotor position and speed is proposed.
Variable Power Supply with Digital Control with seven segments display is one of the applications of electronics to increase the facilities of life. It is facilitates the operation of voltage regulators around the electronics lab. It provides a system that is simple to understand and also to operate, a system that would be cheaper and affordable.
Automatic power factor_improvement_and_monitoring_by_using_plc[1]ferozpatowary
Power factor correction (PFC) is a process of negotiating the unwanted effects of electric loads that create a power factor less than one. Power factor correction may be applied either by an electrical power transmission utility to enhance the efficiency of transmission network. In this paper three transformers of different ratings have been used which acts as inductive load each of which produce different power factor variation. The power factor of the supply line is directly monitored by the Power Meter which is connected in parallel to the supply line. The value of the capacitance (capacitor bank) required for correcting the power factor variation due to each transformer and their combination is found out separately. Capacitor bank for the respective load is triggered by using PLC.
In the era of technological advancement, use of computer technology has become inevitable. Hence it has become the need of the hour to integrate software methods in engineering curriculum as a part to boost pedagogy techniques. Simulations software is a great help to graduates of disciplines such as electrical engineering. Since electrical engineering deals with high voltages and heavy instruments, extra care must be taken while operating with them. The viable solution would be to have appropriate control. The appropriate control could be well designed if engineers haveknowledge of kind of waveforms associated with the system. Though these waveforms can be plotted manually, but it consumes a lot of time. Hence aid of simulation helps to understand steady state of system and resulting in better performance. In this paper computer, aided teaching of transformer is carried out using MATLAB/Simulink. The test carried out on a transformer includes open circuit test and short circuit respectively. The respective parameters of the transformer are then calculated using the values obtained from the open circuit and short circuit test respectively using Simulink.
DFIG control of WECS using indirect matrix converter Kuldeep Behera
The connection and operation of wind power plants produce some problems that are rising partly owing to large changeability of environment conditions, influencing the electrical energy supply from these sources. To be possible to study phenomena that are connected with wind power plants and impacts of their operation on the operation of distribution and transmission systems, it is necessary to do such as in other branches, different computer simulations. A grid connected wind power generation scheme using doubly fed induction generator is studied. The aim is modelling and simulation of DFIG operating in two quadrants (torque-speed) by a suitable control technique to control the rotor current. This method will also replace the conventional converter by Indirect Matrix Converter.
IMPROVED MPPT METHOD TO INCREASE ACCURACY & SPEED IN PHOTOVOLTAIC UNDER VARIA...Naimesh Rama
This study proposes a novel MPPT method and the detailed performance comparison with FLC techniques is achieved. Under sudden change in atmospheric operating conditions, the proposed MPPT method performs better performance the proposed MPPT method has achieved the lowest oscillation rate at the MPP compared to commonly used methods.
Master Thesis presentation.
Nanocomposite generator for energy harvesting from a bending movement.
Research: CNTs, Nanocomposites and Piezoelectric effect theoretical background.
Nanocomposite Generator modelling and practical experiment.
Results presentation.
Control of Grid-tied solar photovoltaic power using quasi z-source inverter a...Sasidharan Srinivasan
The speculative nature of solar energy compels the use of robust controllers for effective photovoltaic power transfer in the system. The entire energy yield can be
maximized by using a maximum power point tracker (MPPT). This ability of the MPPT is combined with a quasi-Z-source inverter in order to provide a predictive and an efficient control of the grid-connected photovoltaic cells. The MPC controller
provides a linear model and thus, a simplified solution for the optimization problem. It provides a better performance along with perturb and observe (P&O) technique compensating for its poor dynamic performance under rapidly varying
meteorological changes. The improved control certifies a better stature for operation and maximizes the photovoltaic power in the grid-tied system.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Variable Power Supply with Digital Control with seven segments display is one of the applications of electronics to increase the facilities of life. It is facilitates the operation of voltage regulators around the electronics lab. It provides a system that is simple to understand and also to operate, a system that would be cheaper and affordable.
Automatic power factor_improvement_and_monitoring_by_using_plc[1]ferozpatowary
Power factor correction (PFC) is a process of negotiating the unwanted effects of electric loads that create a power factor less than one. Power factor correction may be applied either by an electrical power transmission utility to enhance the efficiency of transmission network. In this paper three transformers of different ratings have been used which acts as inductive load each of which produce different power factor variation. The power factor of the supply line is directly monitored by the Power Meter which is connected in parallel to the supply line. The value of the capacitance (capacitor bank) required for correcting the power factor variation due to each transformer and their combination is found out separately. Capacitor bank for the respective load is triggered by using PLC.
In the era of technological advancement, use of computer technology has become inevitable. Hence it has become the need of the hour to integrate software methods in engineering curriculum as a part to boost pedagogy techniques. Simulations software is a great help to graduates of disciplines such as electrical engineering. Since electrical engineering deals with high voltages and heavy instruments, extra care must be taken while operating with them. The viable solution would be to have appropriate control. The appropriate control could be well designed if engineers haveknowledge of kind of waveforms associated with the system. Though these waveforms can be plotted manually, but it consumes a lot of time. Hence aid of simulation helps to understand steady state of system and resulting in better performance. In this paper computer, aided teaching of transformer is carried out using MATLAB/Simulink. The test carried out on a transformer includes open circuit test and short circuit respectively. The respective parameters of the transformer are then calculated using the values obtained from the open circuit and short circuit test respectively using Simulink.
DFIG control of WECS using indirect matrix converter Kuldeep Behera
The connection and operation of wind power plants produce some problems that are rising partly owing to large changeability of environment conditions, influencing the electrical energy supply from these sources. To be possible to study phenomena that are connected with wind power plants and impacts of their operation on the operation of distribution and transmission systems, it is necessary to do such as in other branches, different computer simulations. A grid connected wind power generation scheme using doubly fed induction generator is studied. The aim is modelling and simulation of DFIG operating in two quadrants (torque-speed) by a suitable control technique to control the rotor current. This method will also replace the conventional converter by Indirect Matrix Converter.
IMPROVED MPPT METHOD TO INCREASE ACCURACY & SPEED IN PHOTOVOLTAIC UNDER VARIA...Naimesh Rama
This study proposes a novel MPPT method and the detailed performance comparison with FLC techniques is achieved. Under sudden change in atmospheric operating conditions, the proposed MPPT method performs better performance the proposed MPPT method has achieved the lowest oscillation rate at the MPP compared to commonly used methods.
Master Thesis presentation.
Nanocomposite generator for energy harvesting from a bending movement.
Research: CNTs, Nanocomposites and Piezoelectric effect theoretical background.
Nanocomposite Generator modelling and practical experiment.
Results presentation.
Control of Grid-tied solar photovoltaic power using quasi z-source inverter a...Sasidharan Srinivasan
The speculative nature of solar energy compels the use of robust controllers for effective photovoltaic power transfer in the system. The entire energy yield can be
maximized by using a maximum power point tracker (MPPT). This ability of the MPPT is combined with a quasi-Z-source inverter in order to provide a predictive and an efficient control of the grid-connected photovoltaic cells. The MPC controller
provides a linear model and thus, a simplified solution for the optimization problem. It provides a better performance along with perturb and observe (P&O) technique compensating for its poor dynamic performance under rapidly varying
meteorological changes. The improved control certifies a better stature for operation and maximizes the photovoltaic power in the grid-tied system.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
1. Manakula Vinayagar Institute of Technology
(Affiliated to Pondicherry University)
Kalitheerthal Kuppam, Mannadipet Commune, Pondicherry – 605107.
DEPARTMENT OF ELECTRICAL& ELECTRONICS ENGINEERING
[ ME P33 ELECTRICAL AND ELECTRONICS LAB ]
RegisterNumber : …………………………………………………
Name : ………………………………………………….
Branch : ………………………………………………….
Year / Section : ………………………………………………….
Semester : ………………………………………………….
Staff In charge. Head of the Department.
2. Pondicherry University: B.Tech Mechanical Curriculum & Syllabus for semester III.
MEP33 ELECTRICAL AND ELECTRONICS LABORATORY (0 0 3 2)
(A minimum of TEN experiments to be conducted in the following Topics)
OBJECTIVES
An ability to design and conduct experiments on Transformers, AC and DC electrical machines for
their performance analysis. Inverting / Non-Inverting Amplifier and Adder / Substractor using
Op.Amps, Astable Multivitbrator and Counter to analyze & interpret results.
LIST OF EXPERIMENTS:
1. OC and SC Test on Single Phase Transformer
2. Load Test on Single Phase Transformer
3. Load Test on 3 Phase Transformer
4. Load Test on Single Phase Induction Motor
5. Two Wattmeter Method of Power Measurement
6. Pre-determination of voltage regulation of 3 phase Alternator by EMF method
7. Inverting and Non-Inverting Amplifier Using 741 IC
8. Adder / Substractor Using 741 IC
9. Astable Multivitbrator Using 555 IC
10. Counter Using 7490 IC
3. MANUAL INDEX
Sl. No. Name of the Experiment Page No.
I Safety measures and precautions 1
ELECTRICAL
1 Load test on single-phase transformer. 2 – 5
2 O.C and S.C test on single-phase transformer. 6 – 11
3 Two wattmeter method of power measurement 12 – 15
4 Load test on three-phase transformer. 16 – 19
5 Load test on single phase Induction Motor. 20 – 23
6
OCC of Alternator
a) Pre-determination of voltage regulation of 3 phase
Alternator by EMF method
24 – 29
ELECTRONICS
7 Inverting and Non-Inverting Amplifier using 741 IC. 30 – 33
8 Adder / Substractor using 741 IC. 34 – 37
9 Astable Multivibrator using 555 IC. 38 – 41
10 Counter Using 7490 IC 42 – 45
11 Model Graph and drawing methods. 46 – 48
12 Theory for experiments for 1 to 6 49 - 51