1. Porous hollow SnO2 nanofibers were fabricated by annealing electrospun polyvinylpyrrolidone (PVP)/Sn precursor composite nanofibers.
2. The formation mechanism involves a core-shell structure forming during electrospinning due to solvent evaporation. PVP then decomposes during annealing, acting as a sacrificial template to maintain the fibrous structure.
3. A Kirkendall effect and concentration gradient lead to hollow fiber formation as Sn precursor diffuses outward and SnO2 forms on the surface via surface diffusion, leaving a hollow core.
A Review of Zinc-Oxide as Nano Materials and Devicesidescitation
This paper presents a review of zinc oxide (ZnO) as
nano material and device. ZnO has gained substantial interest
in the research area of wide band gap semiconductors due to
its unique electrical, optical and structural properties.
Recently, ZnO as nano material generates much interest
among researchers and technologists and have been used in
many devices such as UV photodetectors, light emitting diodes,
solar cells and transistors. Moreover, a brief overview on ZnO
recent advances on nanoparticles, nanowires and their
applications as devices are discussed and reviewed.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
A Review of Zinc-Oxide as Nano Materials and Devicesidescitation
This paper presents a review of zinc oxide (ZnO) as
nano material and device. ZnO has gained substantial interest
in the research area of wide band gap semiconductors due to
its unique electrical, optical and structural properties.
Recently, ZnO as nano material generates much interest
among researchers and technologists and have been used in
many devices such as UV photodetectors, light emitting diodes,
solar cells and transistors. Moreover, a brief overview on ZnO
recent advances on nanoparticles, nanowires and their
applications as devices are discussed and reviewed.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Synthesis and characterization of ZnO nanoparticles via aqueous solution, sol...iosrjce
ZnO nanoparticles were synthesized by aqueous solution method, sol-gel method and hydrothermal
method.The synthesized particles were characterized by XRD ,SEM ,EDX and UV .The X-ray diffraction studies
reveals that the synthesized ZnO nanoparticles have wurtzite structure and the particle size varies from 13 to 18
nm. Scanning Electron Microscopic investigation reveals that the surface morphology of ZnO nanoparticle is
spherical in hydrothermal process and varies to flower like arrangement in aqueous solution and sol-gel
process. The UV-Visible spectrum of the nanoparticles shows a blue shift compared to that of the bulk sample.
Surface Modification of Nanoparticles for Biomedical ApplicationsReset_co
Surface ligands on nanoparticles control their properties and interactions, which can be harnessed for biomedical imaging, cell targeting, and therapeutic applications.
Synthesis of MWNTs, DWNTs and SWNTs buckypaper using triton x 100. and compar...Awad Albalwi
In this study buckypaper of MWNTs, DWNTs and SWNT have been synthesised using filtration of carbon nanotubes dispersed in 1% TritonX 100 as solvents. Dispersions were generated by pulse sonication of each single wall carbon nanotubes (SWNTs) , Double wall carbon nanotubes (DWNTs) and Multi wall carbon nanotubes in TritonX solvent. Fist, sonication times were investigated for these CNTs to determine the optimum conditions for generating stable dispersions of carbon nanotubes. It was found that optimal dispersions could be generated using Trion X-100 solvent with all these carbon nanotube by using 30minute periods of pulse sonication. The Three buckypapers of MWNTs, DWNTs and SWNTs were produced by filtering dispersions of carbon nanotubes which had undergone 30 minutes of pulse sonication in TritonX100. Conductivity and measurements of the three buckypaper (SWNT,DWNT&MWNT) samples yielded average values of 14.24 , 23 and 19 Scm-1 respectively. Mechanical measurements were determined successfully . Homogeneity in the produced buckypapers were investigated confirming by scanning electron microscopy .
Synthesis and characterization of pure zinc oxide nanoparticles and nickel do...eSAT Journals
Abstract In this paper, Zinc oxide nanoparticles are synthesized by simple wet chemical precipitation method. Zinc nitrate and sodium hydroxide are used as the starting materials.Zinc oxide nanoparticles are formed at a very low temperature of the order of 800C. Nickel doped zinc oxide nanoparticles are synthesized in two steps. In first step precipitate is obtained by reduction of mixture of zinc nitrate, ferric nitrate and starch by sodium hydroxide solution while in second step the given precipitate is thermally decomposed at high temperature of the order of 4000C. The crystallinity of the synthesized nanoparticles is then confirmed by X ray diffraction spectroscopy (XRD).The elemental composition of the powder is detected by Energy Dispersive X ray spectroscopy (EDAX). The morphology of the powder is investigated by Scanning Electron Microscopy (SEM). Magnetic characterization of nickel doped zinc oxide nanoparticles is done by Squid Magnetometer. Low temperature magnetization behavior revealed ferromagnetic behavior of sample. Key Words: Zinc oxide nanoparticles, Nickel doped ZnO, Antibacterial activity, Squid magnetometer, SEM
Improvement Structural and Optical Properties of ZnO/ PVA Nanocompositesiosrjce
IOSR Journal of Applied Physics (IOSR-JAP) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Synthesis and characterization of zno thin films deposited by chemical bath t...eSAT Journals
Abstract ZnO thin films have been deposited on silica glass substrate using the chemical bath deposition technique. The precursors used were zinc chloride and aqueous ammonia. The solution was stirred continuously with the help of a magnetic stirrer at a bath temperature of 70 oC and a deposition time of 70 minutes. The elemental composition and the surface morphology were studied using energy dispersive and scanning electron microscopy. The band gap was 2.72, 2.66, 2.60 eV for as-deposited, annealed at 200 oC and 300 oC respectively. There was a red shift in the band gap energy as the annealing temperature was increased. This might be due to an improvement in the crystallinity of the ZnO thin films. Index Terms: Zinc oxide, chemical bath, band gap, annealing
Synthesis, Characterization of ZnS nanoparticles by Coprecipitation method us...IOSR Journals
ZnS nanoparticles are prepared by coprecipitation method using various capping agents like PVP (polyvinylpyrrolidone), PVA (polyvinylalcohol) and PEG-4000 (polyethyleneglycol). These are characterized by UV-Visible spectra, X-ray diffraction (XRD) studies, Fourier Transform Infra-red spectra (FTIR) and Transmission electron microscopy (TEM). UV-Visible absorption spectra are used to find the optical band gap and the values obtained have been found to be in the range of 3.80-4.00eV. The particle size of nanoparticles calculated from XRD pattern has been in the range of 2-4 nm. It is also observed that the particle size of nanoparticle is affected by the nature of capping agent. Photo catalytic degradation of xylenol orange (XO) by the nanoparticles shows that these act as photo catalysts under sunlight irradiation. The XO dye was degraded more than 87.24, 83.42 and 73.05% in the presence of PEG-4000, PVA and PVP capped ZnS nanoparticles in 120, 150 and 180 min. respectively. The kinetics of catalyzed by synthesized ZnS nanoparticles with XO dye follows pseudo-first order kinetics with reasonable apparent rate constants.
OPTICAL BEHAVIOUR OF SYNTHESIZED ZNO NANOTABLETS AND ITS TRANSFORMED NANORODS...antjjournal
We are reporting the preparation of ZnO nanotablets at relatively low temperature (1500C) using zinc acetate [Zn(Ac)2], NaOH, cetyltrimethylammonium bromide (CTAB) by solvothermal method. By adjusting
the molar ratio of the reactants we obtained nanorods and we also obtained the variation of the dimension
of the nanorods using hydrazine hydrate as capping reagent. The prepared samples were morphologically
recognized as well crystallized. The average diameter of the ZnO nanotablets were ranging from 500 to 600 nm and the average thickness of the nanotablets were ranging from 85 to 90 nm. The length of ZnO nanorods were ranging from 300 to several micrometers and breadth of the ZnO nanorods were ranging from 80 to 160 nm. The optical properties of the prepared materials have also been studied with the exhibition of its interesting behavior.
Synthesis and characterization of ZnO nanoparticles via aqueous solution, sol...iosrjce
ZnO nanoparticles were synthesized by aqueous solution method, sol-gel method and hydrothermal
method.The synthesized particles were characterized by XRD ,SEM ,EDX and UV .The X-ray diffraction studies
reveals that the synthesized ZnO nanoparticles have wurtzite structure and the particle size varies from 13 to 18
nm. Scanning Electron Microscopic investigation reveals that the surface morphology of ZnO nanoparticle is
spherical in hydrothermal process and varies to flower like arrangement in aqueous solution and sol-gel
process. The UV-Visible spectrum of the nanoparticles shows a blue shift compared to that of the bulk sample.
Surface Modification of Nanoparticles for Biomedical ApplicationsReset_co
Surface ligands on nanoparticles control their properties and interactions, which can be harnessed for biomedical imaging, cell targeting, and therapeutic applications.
Synthesis of MWNTs, DWNTs and SWNTs buckypaper using triton x 100. and compar...Awad Albalwi
In this study buckypaper of MWNTs, DWNTs and SWNT have been synthesised using filtration of carbon nanotubes dispersed in 1% TritonX 100 as solvents. Dispersions were generated by pulse sonication of each single wall carbon nanotubes (SWNTs) , Double wall carbon nanotubes (DWNTs) and Multi wall carbon nanotubes in TritonX solvent. Fist, sonication times were investigated for these CNTs to determine the optimum conditions for generating stable dispersions of carbon nanotubes. It was found that optimal dispersions could be generated using Trion X-100 solvent with all these carbon nanotube by using 30minute periods of pulse sonication. The Three buckypapers of MWNTs, DWNTs and SWNTs were produced by filtering dispersions of carbon nanotubes which had undergone 30 minutes of pulse sonication in TritonX100. Conductivity and measurements of the three buckypaper (SWNT,DWNT&MWNT) samples yielded average values of 14.24 , 23 and 19 Scm-1 respectively. Mechanical measurements were determined successfully . Homogeneity in the produced buckypapers were investigated confirming by scanning electron microscopy .
Synthesis and characterization of pure zinc oxide nanoparticles and nickel do...eSAT Journals
Abstract In this paper, Zinc oxide nanoparticles are synthesized by simple wet chemical precipitation method. Zinc nitrate and sodium hydroxide are used as the starting materials.Zinc oxide nanoparticles are formed at a very low temperature of the order of 800C. Nickel doped zinc oxide nanoparticles are synthesized in two steps. In first step precipitate is obtained by reduction of mixture of zinc nitrate, ferric nitrate and starch by sodium hydroxide solution while in second step the given precipitate is thermally decomposed at high temperature of the order of 4000C. The crystallinity of the synthesized nanoparticles is then confirmed by X ray diffraction spectroscopy (XRD).The elemental composition of the powder is detected by Energy Dispersive X ray spectroscopy (EDAX). The morphology of the powder is investigated by Scanning Electron Microscopy (SEM). Magnetic characterization of nickel doped zinc oxide nanoparticles is done by Squid Magnetometer. Low temperature magnetization behavior revealed ferromagnetic behavior of sample. Key Words: Zinc oxide nanoparticles, Nickel doped ZnO, Antibacterial activity, Squid magnetometer, SEM
Improvement Structural and Optical Properties of ZnO/ PVA Nanocompositesiosrjce
IOSR Journal of Applied Physics (IOSR-JAP) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Synthesis and characterization of zno thin films deposited by chemical bath t...eSAT Journals
Abstract ZnO thin films have been deposited on silica glass substrate using the chemical bath deposition technique. The precursors used were zinc chloride and aqueous ammonia. The solution was stirred continuously with the help of a magnetic stirrer at a bath temperature of 70 oC and a deposition time of 70 minutes. The elemental composition and the surface morphology were studied using energy dispersive and scanning electron microscopy. The band gap was 2.72, 2.66, 2.60 eV for as-deposited, annealed at 200 oC and 300 oC respectively. There was a red shift in the band gap energy as the annealing temperature was increased. This might be due to an improvement in the crystallinity of the ZnO thin films. Index Terms: Zinc oxide, chemical bath, band gap, annealing
Synthesis, Characterization of ZnS nanoparticles by Coprecipitation method us...IOSR Journals
ZnS nanoparticles are prepared by coprecipitation method using various capping agents like PVP (polyvinylpyrrolidone), PVA (polyvinylalcohol) and PEG-4000 (polyethyleneglycol). These are characterized by UV-Visible spectra, X-ray diffraction (XRD) studies, Fourier Transform Infra-red spectra (FTIR) and Transmission electron microscopy (TEM). UV-Visible absorption spectra are used to find the optical band gap and the values obtained have been found to be in the range of 3.80-4.00eV. The particle size of nanoparticles calculated from XRD pattern has been in the range of 2-4 nm. It is also observed that the particle size of nanoparticle is affected by the nature of capping agent. Photo catalytic degradation of xylenol orange (XO) by the nanoparticles shows that these act as photo catalysts under sunlight irradiation. The XO dye was degraded more than 87.24, 83.42 and 73.05% in the presence of PEG-4000, PVA and PVP capped ZnS nanoparticles in 120, 150 and 180 min. respectively. The kinetics of catalyzed by synthesized ZnS nanoparticles with XO dye follows pseudo-first order kinetics with reasonable apparent rate constants.
OPTICAL BEHAVIOUR OF SYNTHESIZED ZNO NANOTABLETS AND ITS TRANSFORMED NANORODS...antjjournal
We are reporting the preparation of ZnO nanotablets at relatively low temperature (1500C) using zinc acetate [Zn(Ac)2], NaOH, cetyltrimethylammonium bromide (CTAB) by solvothermal method. By adjusting
the molar ratio of the reactants we obtained nanorods and we also obtained the variation of the dimension
of the nanorods using hydrazine hydrate as capping reagent. The prepared samples were morphologically
recognized as well crystallized. The average diameter of the ZnO nanotablets were ranging from 500 to 600 nm and the average thickness of the nanotablets were ranging from 85 to 90 nm. The length of ZnO nanorods were ranging from 300 to several micrometers and breadth of the ZnO nanorods were ranging from 80 to 160 nm. The optical properties of the prepared materials have also been studied with the exhibition of its interesting behavior.
Synthesis, characterization and electrocatalytic activity of silver nanorods ...kutty79
This paper describes a simple method of synthesizing silver nanorods using the polyol process, where propylene glycol serves both as a reducing
agent and as a solvent in the presence of a capping reagent such as polyvinylpyrrolidone (PVP). The diameter and length of silver nanorods could be
controlled by changing the AgNO3/PVP ratio. The end-to-end assembly of the silver nanorods was found. The silver nanorods were characterized by
using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and absorption spectroscopy. The catalytic activity of a
glassy carbon electrode with Ag nanorods exhibits extraordinary electrocatalytic activities towards the electro-reduction of benzyl chloride.
Fabrication and characterization of nickelijoejournal
This paper shows that nickel nanowires of length 11μm and diameters 800 and 15nm were grown within
the pores of nuclear track polycarbonate membrane by electrodepositing nickel. Surface morphology and
crystallographic structure of the deposited nanowires was investigated using SEM, TEM and XRD
respectively. It is found that low current density gives good result, while high current density leads to the
formation of curled nanowires. Fabricated nanowires were further investigated for electrical properties
and found that nanowires obey ohm’s law. Through structural characterization it has been observed that
the fabricated nanowires posses FCC lattice structure.
A NOVEL PRECURSOR IN PREPARATION AND CHARACTERIZATION OF NICKEL OXIDE (NIO) A...antjjournal
Synthesis of Nickel Oxide (NiO) nanoparticles and cobalt oxide (CO3O4) materials synthesis by aqueous chemical growth (ACG) Techniques. Oxide based material having a wide band gap, and suitable for optical devices,Optoelectronic devices, UV photodetector, and Light emitting diode LEDs. The analysis
and characterizationof Nickel Oxide (NiO) and cobalt oxide (CO3O4) nanoparticles by(1) X-ray diffraction (XRD), (2) Scanning electron microscopy (SEM), and (3) Ultraviolet–visible (UV–Vis) spectroscopy.
Potentiostatic Deposition of ZnO Nanowires: Effect of Applied Potential and Z...IJRES Journal
In this work we report on potentiostatic deposition of Zinc oxide (ZnO) nanowires on fluorine-doped tin oxide (FTO) covered glass substrates from electroreduction of molecular oxygen. The influence of applied deposition potential, and the concentrations of zinc precursor (ZnCl2) on the properties of ZnO nanowires was investigated.SEM results revealed that ZnO nanowires electrodeposited at applied potential -0.85Vhave high density and good alignment. The diameters and densities of the electrodeposited ZnO nanowires are strongly dependent on the zinc ion concentrations and well aligned nanowires with uniform diameter can be obtained when the concentration of zinc ions is between 0.5 mM and 1 mM.
Zno and znopbs heterojunction photo electrochemical cellseSAT Journals
Abstract Photo Electrochemical Cell (PEC) can also be used for splitting of water into hydrogen and Oxygen. Here, ZnO nanorod PEC has been prepared in hydrothermal method and ZnO/PbS quantum dot PEC has been prepared by hydrothermal method and chemical bath deposition method. UV-Visible spectroscopy has been observed. Flat band voltage, bandwidth and majority charge carriers have been calculated from Mott-Schottky. Impedance variation at semiconductor and electrolyte junction has been observed with Electrochemical Impedance Spectroscopy (EIS). Keywords: Hydrothermal, Chemical bath, ZnO/PbS, UV-Vis, Mott-Schottky, EIS.
Vapor growth of binary and ternary phosphorusbased semiconductors into TiO2 n...Pawan Kumar
We report successful synthesis of low band gap inorganic polyphosphide and TiO2 heterostructures with
the aid of short-way transport reactions. Binary and ternary polyphosphides (NaP7, SnIP, and (CuI)3P12)
were successfully reacted and deposited into electrochemically fabricated TiO2 nanotubes. Employing
vapor phase reaction deposition, the cavities of 100 mm long TiO2 nanotubes were infiltrated;
approximately 50% of the nanotube arrays were estimated to be infiltrated in the case of NaP7. Intensive
characterization of the hybrid materials with techniques including SEM, FIB, HR-TEM, Raman
spectroscopy, XRD, and XPS proved the successful vapor phase deposition and synthesis of the
substances on and inside the nanotubes. The polyphosphide@TiO2 hybrids exhibited superior water
splitting performance compared to pristine materials and were found to be more active at higher
wavelengths. SnIP@TiO2 emerged to be the most active among the polyphosphide@TiO2 materials. The
improved photocatalytic performance might be due to Fermi level re-alignment and a lower charge
transfer resistance which facilitated better charge separation from inorganic phosphides to TiO2.
This work studied the effect of applying pulse current
(ton=off=1s) on the electrodeposition of silver nanoparticles on
carbon sphere surface as a substrate. The electrolyte is made of 0.1
M KNO3, 0.1 M KCN and 0.01M AgNO3. The pH value has been
adjusted in the alkaline region of 9.1 with the help of K(NO3)
addition. Experiments were carried out at room temperature for
periods up to 12 minutes. The cell is fitted with a mechanical stirrer
to keep the electrolyte in a dynamic state. Product(s) was
characterized with the help of SEM and EDX and field emission.
Results obtained show that silver nanoparticles has successfully
electrodeposited under pulse current conditions with a particle size
of 100–400 nm after 2 minutes. Deposition takes place on certain
accessible sites of the carbon surface of the substrate forming a
monolayer of scattered silver nanoparticles. Formation of macro
particles with larger diameter and multilayer in thickness takes
place with continuous deposition of silver nanoparticles on the
formerly deposited silver. Pulse current helps management of the
monolayer deposition as compared to the steady DC application
with respect to particle diameter and number of layers.
Comparative study on ammonia sensing properties of sno2 nanocomposites fabric...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
2. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
In this work, a systematic investigation into the mission electron microscope (TEM; JEOL-2100,
structures of as-spun nanofiber, the effect of calci- Japan). The electrospinning specimens were sputter
nation and crystallite growth was conducted for coated with gold before SEM observation, while the
understanding the formation mechanism of SnO2 SnO2 nanofibers were examined without any fur-
hollow nanofibers. In addition, the growth kinetics ther treatment. For TEM observation, the electro-
SnO2 nanograin in individual nanofiber was also spun composited nanofibers were directly collected
proposed. on the copper grids for about 30 seconds during
electrospinning, while the SnO2 nanofibers were
2. Experimental dispersed ultrasonically in ethanol, and then trans-
2.1. Preparation of porous hollow SnO2 ferred onto copper grids before TEM observation.
nanofibers
Stannic chloride pentahydrate (SnCl4·5H2O), ethanol 2.3. XRD and TGA analyses
and N,N-dimethylformamide (DMF) were pur- The crystal structure analysis was performed on D8
chased from Sinopharm Chemical Reagents Co., Advance X-ray diffraction (Bruker AXS, Germany),
Shanghai, China. Polyvinylpyrrolidone (PVP, Mw = over the 2! range of 10–80º. Thermogravimetric
1300 000 g·mol–1) was supplied by Qi Fuqin Mate- studies were carried out using an SDT 851 thermal
rials Technology Co., LTD. Shanghai, China. Trans- analyzer system (Mettler, Germany) at a heating
parent spinning solution was prepared by adding 3 g rate of 10°C/min.
of SnCl4·5H2O into 10 wt% PVP in ethanol/DMF
solvent mixture (weight ratio 1:1), and the weight 2.4. Surface area measurement
ratio of PVP and SnCl4·5H2O was also 1:1, followed The porosity and specific surface areas of the elec-
by magnetic stirring at ambient temperature. Subse- trospun fibers were measured by N2 adsorption-
quently, the solution was electrospun from the desorption isotherm at 77 K with a Micromeritics
stainless steel needle with an electrostatic voltage NOVA2000e apparatus (Quantachrome, America).
of 18 kV, and formed a fibrous mat on a collector of
aluminum foil. The distance between the needle and 3. Results and discussion
collector was 22 cm. The electrospun fibers were 3.1. Structure observations
then calcinated at 600°C for 3 hrs with a heating Figure 1 demonstrates the morphologies of the elec-
rate of 0.5°C/min. trospun nanofibers before and after calcination at
600°C. The as-spun PVP/SnO2 nanofibers have a
2.2. Structural observations variable diameter ranged between 50 and 300 nm
The structures of the electrospun nanofibers were and form a self-supporting network, as shown in
observed by a scanning electron microscope (SEM; Figure 1a. The TEM image clearly reveals the core-
Hitachi S-4800, Japan) and a high-resolution trans- shell structure with clear boundary of a phase sepa-
Figure 1. SEM images of (a) as- spun PVP/SnO2 nanofibers (b) porous hollow SnO2 nanofibers after calcination at 600°C
170
3. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
calcination. Based on the TEM observations com-
bined TGA/DTGA analysis, the formation process
of SnO2 nanofibrous structures can be traced. At the
initial stage during electrospinning, the core-shell
fibers are fabricated via single capillary electrospin-
ning from homogeneous polymer-sol-double sol-
vents system due to solvent evaporation and rapid
phase separation [13]. Various factors may have
strong influences on the morphology of the electro-
spun fibers due to the complexity of hydrolysis and
condensation reactions during the gelation of sol as
well as the process of fiber formation. The hydroly-
sis reaction of SnCl4 in water is schematically illus-
trated in Figure 3. In this work, excessive ethanol
was applied to prepare Sn precursor but insufficient
H2O was used to make it partially hydrolyzed. Thus,
the polymerization and polycondensation reactions
Figure 2. TEM images of as-spun PVP/SnO2 nanofibers at
room temperature
of tin dioxide could be limited to a very low level.
Furthermore, a kind of more volatile solvent ethanol
ration between PVP and Sn precursor, as presented evaporates rapidly at the edge of the fiber and a
in Figure 2. contrary concentration gradient of ethanol and DMF
Figure 1b shows the image of SnO2 nanofibers along the radial direction of the fiber will be formed
obtained by the calcination treatment of as-spun during electrospinning. Especially, ethanol, the
core-shell PVP/SnO2 nanofibers. It can be clearly 50% weight ratio of solvents, which was used for
seen that these fibers have a tubular structure with preparation tin alkoxide, on the surface of the fibers
dense shells, which consist of nanograins of approxi- is too little to form large solvent-rich regions during
mately 17 nm in diameter, as revealed in Figure 1b. the phase separation because of the rapid evapora-
Besides SnO2 nanofibers have a relatively uniform tion. The high molecular weight PVP and high con-
diameter, the outer diameter of the hollow fibers is centration solution contribute to retain less ethanol
decreased compared to that of the as-spun PVP/ to form porous surface as well. So the smooth and
SnO2 fibers shown in Figure 1a. compact surface without any porous structures can
be observation by TEM, as revealed in Figure 2. At
3.2. Formation of porous hollow SnO2 the same time, Sn precursor in nature has a very
nanofibers much higher solubility in ethanol than in PVP [14].
The forming process of hollow SnO2 nanofibers So, it would diffuse from the surface to the core of
experiences 5 stages during electrospinning and the fiber. As a result, Sn precursor tends to congre-
Figure 3. Schematic illustration of the hydrolytic–polymeric reaction of SnCl4·5H2O. Tin, blue; oxygen, red; carbon, pur-
ple; hydrogen, white; chlorine, brown.
171
4. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
gate at the center of the fiber by the driving force of
the concentration gradient of ethanol, resulting in a
clear core/shell structure.
At the second stage, the first weight loss stage
which coincides with the decomposition of PVP
chain at the temperature around 280 to 330ºC occurs
[15], as shown in Figure 4. The core-shell nanofibers
still exist though the diameter of fiber decreases and
the boundaries between core and shell are blurred,
as indicated in Figure 5a. Eventually, the core-shell
structure disappears after the second endothermic
Figure 4. TGA-DTGA graph of thermal decomposition of peak from 350–480ºC (Figure 4) due to the almost
electrospun PVP/SnO2 composite nanofibers complete decomposition of PVP, in which the process
Figure 5. TEM images of PVP/SnO2 nanofibers (a) calcined at 300ºC, (b) calcined at 400ºC, (c) calcined at 500ºC, (d) cal-
cined at 600ºC
172
5. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
enters the third stage. At this stage, the Sn precursor outward transport of fast-moving Sn precursor mol-
on the surface region of the electrospun nanofibers ecules (short as Ja in Figure 6) move through the
is exposed to air, leading to the decomposition and oxide layer and a balancing inward flow of vacan-
oxidation of the precursor and resulted in the for- cies traverse to the vicinity of the Sn precursors and
mation of SnO2. Thus some small SnO2 particles are Sn precursors/SnO2 mixture interface (a/ab inter-
presented on the surface whereas most Sn precursor face) and vacancies assisted exchange of material
inside the fibers remains unreacted due to the absence depends on the way of bulk inter-diffusion, as illus-
of oxygen, leading to solid fiber structure with par- trated in Figure 6b. Then, the voids are just like
ticles on surface, as illustrated in Figure 5b. When sinks to transfer the inward flux of vacancies (Jc =
the forming process enters the fourth stage which is Ja – Jb) and the voids coalesce into bigger ones so
a complicated transformation process including as to touch the compound layer ab. Such new bridges
grain formation, grain growth and grain reorganiza- are established as fast transport paths for the remain-
tion. Figure 5c may be one of morphological situa- ing Sn precursors (Figure 6c). At this stage, the sur-
tion during this process. Nanograins are the main face diffusion takes over the dominant material
components to build solid body though the fibers transport process because the porous surface owns
appear to be irregular. Finally, the hollow SnO2 much lower apparent activation energy than those
nanofibers are formed with porous nanograins on of bulk diffusion [18]. Sn precursors can be quickly
the shell, as shown in Figure 5d oxidized at the surface of ab layer and redistribute
According to TEM observations of the hollow SnO2 themselves via fast surface diffusion, while the ab
nanofibers formation, it is clearly revealed that PVP layer remains bulk inter-diffusion associated with
and Sn precursor are the main constituents of core- Kirkendall effect until the whole Sn precursors turn
shell as-spun nanofibers. Then PVP is gradually into SnO2. Therefore, SnO2 stands on the shell and
decomposed during the calcination process. In this vacancies are continuously generated and flow
process, PVP plays the role of sacrificial template, inward to build a hollow core, as shown in Fig-
which is the key effect to maintain fibrous struc- ure 6d. In all, the fibrous structure is established by
tures. The decomposition of PVP, to some extent, PVP template and Kirkendall effect contributions to
reduces the final fiber diameters. The key mecha- form hollow structure. Furthermore, surface diffusion
nism responsible for the formation of hollow also plays an important role to build hollow fibers.
nanofibers is attributed to the interaction between The surface diffusion is also beneficial to the nano-
Sn precursor and SnO2 which will be discussed in sized grains growth. In the experiments, the anneal-
the next section. ing time (! 4 hrs) obeys the parabolic kinetic equa-
tion of grain growth for isothermal annealing as
3.3. Analysis of formation mechanism Equation (1):
As mentioned above, the main components after the m
Dm – D0 = Kt (1)
complete decomposition of PVP are some SnO2
particles on the surface region and the massive Sn where t is the annealing time, D is the average grain
precursors in the core to form a concentration gradi- size after annealing for time t, D0 is the initial grain
ent, which lead to a Kirkendall effect [16]. Kirk- size, m is the grain growth exponent, and K is a tem-
endall effect is associated with the phenomenon of perature dependent rate constant =1.04·1013 at
a considerable amount of compounds moving in or 600ºC [19].
out of a sphere due to the diffusion coupled with The average grain size after 3 hrs calcination is
different diffusion rates [17]. When the solid fiber obtained by calculating the size of three intense
consists of Sn precursor and SnO2 (Figure 6a), the peaks, (110), (101) and (211) of SnO2 from XRD
Figure 6. The model for hollow structure formation of SnO2 nanofibers (see text for details)
173
6. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
patterns. When D0 is neglected, the estimated m defined after calcination at 500 and 600ºC, without
value is 13.2, which is inconsistent with the classi- altering their positions but with high intensity
cal grain growth value (m = 2~4) [20], which means because of better crystallization. All the diffraction
the grain growth of the nanograins observed in the peaks are indexed to the tetragonal rutile SnO2, the
individual nanofibers cannot be primarily ascribed only crystalline phase existing in the obtained nano-
by lattice diffusion in a pore controlled scheme. fibers.
When the new bridges are established to transport
the mass materials as mentioned above, the connec- 3.4. Surface areas
tion for lattice diffusion are broken and surface dif- Brunauer–Emmett–Teller (BET) gas sorption meas-
fusion will enhance the local voids, meanwhile acts urement reveals the surface area of the hollow SnO2
as the driving force for grain growth, leading to fibers. The N2 adsorption–desorption isotherm curve
acceleration in the speed of coarse grains by the of the porous SnO2 fibers is shown in Figure 8. It
reduction of the free energy of the system. However, exhibits the characteristic of mesopore structures,
the growth kinetics of nanograins in hollow SnO2 especially even owns an adsorption at high P/P0,
fibers is complicated and needs further investiga- which was also reported as an aggregation of plate-
tion. Heating rate should be studied to control the like particles giving rise to slit-shaped pores [21].
morphology of fibers while using the temperature The porous structure is confirmed by the SEM
and duration of calcination as a tool to obtain observations shown in Figure 1b. The average pore
desired nanograins on nanofiber surfaces have size in the porous SnO2 fibers is approximately
already been reported by Park et al. in Ref [20]. 16.2 nm, and the corresponding BET specific sur-
XRD patterns in Figure 7 confirm the formation of face area is about 35.8 m2/g (BJH method).
SnO2 fibers. The fibers after calcination at 300ºC
show a broad continuum indicating that the crystal-
lization of tin oxide just starts at this temperature
but not sufficient enough to produce the diffraction
patterns. However, the XRD patterns of the fibers
after calcination at 400ºC show the emergence of
tetragonal rutile tin oxide crystals with distinct
peaks due to the decomposition of PVP and oxida-
tion of some Sn precursors on the fiber surface. The
diffraction peaks become much sharper and well
Figure 8. Nitrogen adsorption/desorption isotherms of the
hollow SnO2 nanofibers
4. Conclusions
In this work, porous hollow SnO2 nanofibers were
successfully prepared by electrospinning technique
via a single capillary from PVP/Sn precursors/dual
solvents system with calcination treatment. During
the electrospinning process, a stringent component
matching contributes to core-shell structure which
provided advantages for preserving fibrous struc-
tures based on sacrificial PVP template. Hollow
structures initiated by the Kirkendall effect owing
to the concentration gradient of Sn precursors and
Figure 7. XRD patterns of SnO2 nanofibres at different SnO2, suggesting that surface diffusion processes
temperature
174
7. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
might be the dominant mass flow mechanism respon- [6] Xu L., Dong B., Wang Y., Bai X., Liu Q., Song H.:
sible for the enlargement of the interior pores after Electrospinning preparation and room temperature gas
sensing properties of porous In2O3 nanotubes and
initially formation induced by the Kirkendall effect.
nanowires. Sensors and Actuators B: Chemical, 147,
This deduction was also confirmed by the calcu- 531–538 (2010).
lated grain growth value which was higher than the DOI: 10.1016/j.snb.2010.04.003
classical one, which means the grain growth mech- [7] Soares A. J., Perry R. J.: Modeling and simulation of a
anism occurred not only by the lattice diffusion but single tin dioxide nanobelt FET for chemical sensors.
also through surface diffusion. This mechanism IEEE Sensors Journal, 10, 235–242 (2010).
DOI: 10.1109/JSEN.2009.2032154
should also apply to the synthesys of other hollow
[8] Qiu Y., Chen P., Liu M.: Evolution of various por-
nanofibers. The technique described here will be phyrin nanostructures via an oil/aqueous medium: Con-
extendible to many other materials for fabricating trolled self-assembly, further organization, and supra-
such hollow inorganic nanofibers with potential molecular chirality. Journal of the American Chemical
applications in catalysis, microelectronics, and Society, 132, 9644–9652 (2010).
optics. DOI: 10.1021/ja1001967
[9] Park J. Y., Choi S-W., Kim S. S.: A synthesis and sens-
ing application of hollow ZnO nanofibers with uni-
Acknowledgements form wall thicknesses grown using polymer templates.
The research was supported by the specialized Research Nanotechnology, 21, 475601 (2010).
Fund for the Doctoral Program of higher education DOI: 10.1088/0957-4484/21/47/475601
(No.20090093110004) and National Natural Science Foun- [10] Chen H., Wang N., Di J., Zhao Y., Song Y., Jiang L.:
dation of China (No.51006046 and No.51163014). Nanowire-in-microtube structured core/shell fibers via
multifluidic coaxial electrospinning. Langmuir, 26,
11291–11296 (2010).
References DOI: 10.1021/la100611f
[1] Song X., Qi Q., Zhang T., Wang C.: A humidity sensor [11] Cheng Y., Huang W., Zhang Y., Zhu L., Liu Y., Fan X.,
based on KCl-doped SnO2 nanofibers. Sensors and Cao X.: Preparation of TiO2 hollow nanofibers by
Actuators B: Chemical, 138, 368–373 (2009). electrospining combined with sol–gel process. Cryst-
DOI: 10.1016/j.snb.2009.02.027 EngComm, 12, 2256–2260 (2010).
[2] Zhang Y., Li J. P., An G. M., He X.: Highly porous DOI: 10.1039/b922564a
SnO2 fibers by electrospinning and oxygen plasma [12] Li L., Yin X., Liu S., Wang Y., Chen L., Wang T.: Elec-
etching and its ethanol-sensing properties. Sensors and trospun porous SnO2 nanotubes as high capacity anode
Actuators B: Chemical, 144, 43–48 (2010). materials for lithium ion batteries. Electrochemistry
DOI: 10.1016/j.snb.2009.10.012 Communications, 12, 1383–1386 (2010).
[3] Zhang Z., Shao C., Li X., Zhang L., Xue H., Wang C., DOI: 10.1016/j.elecom.2010.07.026
Liu Y.: Electrospun nanofibers of ZnO–SnO2 hetero- [13] Zhang K., Wang X., Yang Y., Wang L., Zhu M., Hsiao
junction with high photocatalytic activity. Journal of B., Chu B.: Aligned and molecularly oriented semihol-
Physical Chemistry C, 114, 7920–7925 (2010). low ultrafine polymer fiber yarns by a facile method.
DOI: 10.1021/jp100262q Journal of Polymer Science Part B: Polymer Physics,
[4] Yang Z., Du G., Feng C., Li S., Chen Z., Zhang P., Guo 48, 1118–1125 (2010).
Z., Yu X., Chen G., Huang S., Liu H.: Synthesis of uni- DOI: 10.1002/polb.22003
form polycrystalline tin dioxide nanofibers and elec- [14] Wang W., Zhou J., Zhang S., Song J., Duan H., Zhou
trochemical application in lithium-ion batteries. Elec- M., Gong C., Bao Z., Lu B., Li X., Lan W., Xie E.: A
trochimica Acta, 55, 5485–5491 (2010). novel method to fabricate silicananotubes based on
DOI: 10.1016/j.electacta.2010.04.045 phase separation effect. Journal of Materials Chem-
[5] Gong S., Liu J., Xia J., Quan L., Liu H., Zhou D.: Gas istry, 20, 9068–9072 (2010).
sensing characteristics of SnO2 thin films and analyses DOI: 10.1039/C0JM02120B
of sensor response by the gas diffusion theory. Materi- [15] Loría-Bastarrachea M. I., Herrera-Kao W., Cauich-
als Science and Engineering B: Advanced Functional Rodríguez J. V., Cervantes-Uc J. M., Vázquez-Torres
Solid-State Materials, 164, 85–90 (2009). H., Ávila-Ortega A.: A TG/FTIR study on the thermal
DOI: 10.1016/j.mseb.2009.07.008 degradation of poly(vinyl pyrrolidone). Journal of
Thermal Analysis and Calorimetry, 104, 737–742
(2010).
DOI: 10.1007/s10973-010-1061-9
175
8. Xia et al. – eXPRESS Polymer Letters Vol.6, No.2 (2012) 169–176
[16] Yin Y., Rioux R. M., Erdonmez C. K., Hughes S., [19] Lai J. K. L., Shek C. H., Lin G. M.: Grain growth
Somorjai G. A., Alivisatos A. P.: Formation of hollow kinetics of nanocrystalline SnO2 for long-term isother-
nanocrystals through the nanoscale Kirkendall effect. mal annealing. Scripta Materialia, 49, 441–446 (2003).
Science, 304, 711–714 (2004). DOI: 10.1016/S1359-6462(03)00296-3
DOI: 10.1126/science.1096566 [20] Park J. Y., Asokan K., Choi S-W., Kim S. S.: Growth
[17] Kong J., Tan H. R., Tan S. Y., Li F., Wong S. Y., Li X., kinetics of nanograins in SnO2 fibers and size depend-
Lu X.: A generic approach for preparing core–shell ent sensing properties. Sensors and Actuators B:
carbon–metal oxide nanofibers: Morphological evolu- Chemical, 152, 254–260 (2011).
tion and its mechanism. Chemical Communications, DOI: 10.1016/j.snb.2010.12.017
46, 8773–8775 (2010). [21] Sing K. S. W., Everett D. H., Haul R. A. W., Moscou
DOI: 10.1039/C0CC03006F L., Pierotti R. A., Rouquérol J., Siemieniewska T.:
[18] Fan H. J., Knez M., Scholz R., Hesse D., Nielsch K., Reporting physisorption data for gas/solid systems
Zacharias M., Gösele U.: Influence of surface diffu- with special reference to the determination of surface
sion on the formation of hollow nanostructures induced area and porosity. Pure and Applied Chemistry, 57,
by the Kirkendall effect:" The basic concept. Nano Let- 603–619 (1985).
ters, 7, 993–997 (2007). DOI: 10.1351/pac198557040603
DOI: 10.1021/nl070026p
176
9. Copyright of Express Polymer Letters is the property of Budapest University of Technology & Economics and
its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's
express written permission. However, users may print, download, or email articles for individual use.