We report successful synthesis of low band gap inorganic polyphosphide and TiO2 heterostructures with
the aid of short-way transport reactions. Binary and ternary polyphosphides (NaP7, SnIP, and (CuI)3P12)
were successfully reacted and deposited into electrochemically fabricated TiO2 nanotubes. Employing
vapor phase reaction deposition, the cavities of 100 mm long TiO2 nanotubes were infiltrated;
approximately 50% of the nanotube arrays were estimated to be infiltrated in the case of NaP7. Intensive
characterization of the hybrid materials with techniques including SEM, FIB, HR-TEM, Raman
spectroscopy, XRD, and XPS proved the successful vapor phase deposition and synthesis of the
substances on and inside the nanotubes. The polyphosphide@TiO2 hybrids exhibited superior water
splitting performance compared to pristine materials and were found to be more active at higher
wavelengths. SnIP@TiO2 emerged to be the most active among the polyphosphide@TiO2 materials. The
improved photocatalytic performance might be due to Fermi level re-alignment and a lower charge
transfer resistance which facilitated better charge separation from inorganic phosphides to TiO2.
Vapor growth of binary and ternary phosphorus-based semiconductors into TiO 2...Pawan Kumar
We report successful synthesis of low band gap inorganic polyphosphide and TiO2 heterostructures with the aid of short-way transport reactions. Binary and ternary polyphosphides (NaP7, SnIP, and (CuI)3P12) were successfully reacted and deposited into electrochemically fabricated TiO2 nanotubes. Employing vapor phase reaction deposition, the cavities of 100 μm long TiO2 nanotubes were infiltrated; approximately 50% of the nanotube arrays were estimated to be infiltrated in the case of NaP7. Intensive characterization of the hybrid materials with techniques including SEM, FIB, HR-TEM, Raman spectroscopy, XRD, and XPS proved the successful vapor phase deposition and synthesis of the substances on and inside the nanotubes. The polyphosphide@TiO2 hybrids exhibited superior water splitting performance compared to pristine materials and were found to be more active at higher wavelengths. SnIP …
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward exploiting alternative energy resources such as solar energy. Here, we report the successful low-cost and easily accessible synthesis of hybrid semiconductor@TiO2 nanotube photocatalysts. In order to realize its maximum potential in harvesting photons in the visible-light range, TiO2 nanotubes have been loaded with earth-abundant, low-band-gap fibrous red and black phosphorus (P). Scanning electron microscopy– and scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV–vis measurements have been performed, substantiating the deposition of fibrous red and black P on top and inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular …
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward
exploiting alternative energy resources such as solar energy. Here, we
report the successful low-cost and easily accessible synthesis of hybrid
semiconductor@TiO2 nanotube photocatalysts. In order to realize its
maximum potential in harvesting photons in the visible-light range, TiO2
nanotubes have been loaded with earth-abundant, low-band-gap fibrous
red and black phosphorus (P). Scanning electron microscopy− and
scanning transmission electron microscopy−energy-dispersive X-ray
spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV−vis measurements have been performed,
substantiating the deposition of fibrous red and black P on top and
inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular morphology of titania and a vapor-transport technique are utilized to form heterojunctions of P and
TiO2. Compared to pristine anatase 3.2 eV TiO2 nanotubes, the creation of heterojunctions in the hybrid material resulted in
1.5−2.1 eV photoelectrocatalysts. An enhanced photoelectrochemical water-splitting performance under visible light compared
with the individual components resulted for the P@TiO2 hybrids. This feature is due to synergistically improved charge
separation in the heterojunction and more effective visible-light absorption. The electronic band structure and charge-carrier
dynamics are investigated in detail using ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy to elucidate
the charge-separation mechanism. A Fermi-level alignment in P@TiO2 heterojunctions leads to a more reductive flat-band
potential and a deeper valence band compared to pristine P and thus facilitates a better water-splitting performance. Our results
demonstrate effective conversion efficiencies for the nanostructured hybrids, which may enable future applications in
optoelectronic applications such as photodetectors, photovoltaics, photoelectrochemical catalysts, and sensors.
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34−xFexO6−δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6−δ (BCNFCo), exhibited an optical absorption edge at ∼800 nm, p-type conduction and a distinct photoresponse up to 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent-assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskites and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm−2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ∼88%.
Remarkable self-organization and unusual conductivity behavior in cellulose n...Pawan Kumar
Aqueous suspensions of cellulose nanocrystals were blended with Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) [PEDOT:PSS], and cast into thin films. The morphology, structure and electrical properties of the resulting nanocomposite thin films were thoroughly characterized. We found that the CNC–PEDOT:PSS blends self-organize into a layered vertical stack with a pitch of 100–200 nm while retaining a continuous percolation network for PEDOT. Atomic force microscopy, dynamic light scattering and multi-angle light scattering measurements confirmed the wrapping of polymer chains around the rod-like CNCs. The blended films exhibited improved molecular ordering of the PEDOT chains with concomitant improvement in the carrier mobility. The remarkable self-organization and enhanced structural order enabled the CNC–PEDOT:PSS blends to exhibit a high conductivity typical of PEDOT:PSS even when the content of the insulating CNCs in the nanocomposite was as high as 50 wt%.
Synthesis of MWNTs, DWNTs and SWNTs buckypaper using triton x 100. and compar...Awad Albalwi
In this study buckypaper of MWNTs, DWNTs and SWNT have been synthesised using filtration of carbon nanotubes dispersed in 1% TritonX 100 as solvents. Dispersions were generated by pulse sonication of each single wall carbon nanotubes (SWNTs) , Double wall carbon nanotubes (DWNTs) and Multi wall carbon nanotubes in TritonX solvent. Fist, sonication times were investigated for these CNTs to determine the optimum conditions for generating stable dispersions of carbon nanotubes. It was found that optimal dispersions could be generated using Trion X-100 solvent with all these carbon nanotube by using 30minute periods of pulse sonication. The Three buckypapers of MWNTs, DWNTs and SWNTs were produced by filtering dispersions of carbon nanotubes which had undergone 30 minutes of pulse sonication in TritonX100. Conductivity and measurements of the three buckypaper (SWNT,DWNT&MWNT) samples yielded average values of 14.24 , 23 and 19 Scm-1 respectively. Mechanical measurements were determined successfully . Homogeneity in the produced buckypapers were investigated confirming by scanning electron microscopy .
Polymeric carbon nitride-based photocatalysts for photoreforming of biomass d...Pawan Kumar
Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Synthesis and Characterization of Zinc Phthalocyanine-Cellulose Nanocrystal (...Pawan Kumar
We report highly fluorescent cellulose nanocrystals (CNCs) formed by conjugating a carboxylated zinc phthalocyanine (ZnPc) to two different types of CNCs. The conjugated nanocrystals (henceforth called ZnPc@CNCs) were bright green in color and exhibited absorption and emission maxima at ∼690 and ∼715 nm, respectively. The esterification protocol employed to covalently bind carboxylated ZnPc to surface hydroxyl group rich CNCs was expected to result in a monolayer of ZnPc on the surface of the CNCs. However, dynamic light scattering (DLS) studies indicated a large increase in the hydrodynamic radius of CNCs following conjugation to ZnPc, which suggests the binding of multiple ZnPc molecular layers on the CNC surface. This binding could be through co-facial π-stacking of ZnPc, where ZnPc metallophthalocyanine rings are horizontal to the CNC surface. The other possible binding mode would give rise to conjugated systems where ZnPc metallophthalocyanine rings are oriented vertically on the CNC surface. Density functional theory based calculations showed stable geometry following the conjugation protocol that involved covalently attached ester bond formation. The conjugates demonstrated superior performance for potential sensing applications through higher photoluminescence quenching capabilities compared to pristine ZnPc.
Vapor growth of binary and ternary phosphorus-based semiconductors into TiO 2...Pawan Kumar
We report successful synthesis of low band gap inorganic polyphosphide and TiO2 heterostructures with the aid of short-way transport reactions. Binary and ternary polyphosphides (NaP7, SnIP, and (CuI)3P12) were successfully reacted and deposited into electrochemically fabricated TiO2 nanotubes. Employing vapor phase reaction deposition, the cavities of 100 μm long TiO2 nanotubes were infiltrated; approximately 50% of the nanotube arrays were estimated to be infiltrated in the case of NaP7. Intensive characterization of the hybrid materials with techniques including SEM, FIB, HR-TEM, Raman spectroscopy, XRD, and XPS proved the successful vapor phase deposition and synthesis of the substances on and inside the nanotubes. The polyphosphide@TiO2 hybrids exhibited superior water splitting performance compared to pristine materials and were found to be more active at higher wavelengths. SnIP …
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward exploiting alternative energy resources such as solar energy. Here, we report the successful low-cost and easily accessible synthesis of hybrid semiconductor@TiO2 nanotube photocatalysts. In order to realize its maximum potential in harvesting photons in the visible-light range, TiO2 nanotubes have been loaded with earth-abundant, low-band-gap fibrous red and black phosphorus (P). Scanning electron microscopy– and scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV–vis measurements have been performed, substantiating the deposition of fibrous red and black P on top and inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular …
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward
exploiting alternative energy resources such as solar energy. Here, we
report the successful low-cost and easily accessible synthesis of hybrid
semiconductor@TiO2 nanotube photocatalysts. In order to realize its
maximum potential in harvesting photons in the visible-light range, TiO2
nanotubes have been loaded with earth-abundant, low-band-gap fibrous
red and black phosphorus (P). Scanning electron microscopy− and
scanning transmission electron microscopy−energy-dispersive X-ray
spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV−vis measurements have been performed,
substantiating the deposition of fibrous red and black P on top and
inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular morphology of titania and a vapor-transport technique are utilized to form heterojunctions of P and
TiO2. Compared to pristine anatase 3.2 eV TiO2 nanotubes, the creation of heterojunctions in the hybrid material resulted in
1.5−2.1 eV photoelectrocatalysts. An enhanced photoelectrochemical water-splitting performance under visible light compared
with the individual components resulted for the P@TiO2 hybrids. This feature is due to synergistically improved charge
separation in the heterojunction and more effective visible-light absorption. The electronic band structure and charge-carrier
dynamics are investigated in detail using ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy to elucidate
the charge-separation mechanism. A Fermi-level alignment in P@TiO2 heterojunctions leads to a more reductive flat-band
potential and a deeper valence band compared to pristine P and thus facilitates a better water-splitting performance. Our results
demonstrate effective conversion efficiencies for the nanostructured hybrids, which may enable future applications in
optoelectronic applications such as photodetectors, photovoltaics, photoelectrochemical catalysts, and sensors.
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34−xFexO6−δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6−δ (BCNFCo), exhibited an optical absorption edge at ∼800 nm, p-type conduction and a distinct photoresponse up to 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent-assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskites and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm−2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ∼88%.
Remarkable self-organization and unusual conductivity behavior in cellulose n...Pawan Kumar
Aqueous suspensions of cellulose nanocrystals were blended with Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) [PEDOT:PSS], and cast into thin films. The morphology, structure and electrical properties of the resulting nanocomposite thin films were thoroughly characterized. We found that the CNC–PEDOT:PSS blends self-organize into a layered vertical stack with a pitch of 100–200 nm while retaining a continuous percolation network for PEDOT. Atomic force microscopy, dynamic light scattering and multi-angle light scattering measurements confirmed the wrapping of polymer chains around the rod-like CNCs. The blended films exhibited improved molecular ordering of the PEDOT chains with concomitant improvement in the carrier mobility. The remarkable self-organization and enhanced structural order enabled the CNC–PEDOT:PSS blends to exhibit a high conductivity typical of PEDOT:PSS even when the content of the insulating CNCs in the nanocomposite was as high as 50 wt%.
Synthesis of MWNTs, DWNTs and SWNTs buckypaper using triton x 100. and compar...Awad Albalwi
In this study buckypaper of MWNTs, DWNTs and SWNT have been synthesised using filtration of carbon nanotubes dispersed in 1% TritonX 100 as solvents. Dispersions were generated by pulse sonication of each single wall carbon nanotubes (SWNTs) , Double wall carbon nanotubes (DWNTs) and Multi wall carbon nanotubes in TritonX solvent. Fist, sonication times were investigated for these CNTs to determine the optimum conditions for generating stable dispersions of carbon nanotubes. It was found that optimal dispersions could be generated using Trion X-100 solvent with all these carbon nanotube by using 30minute periods of pulse sonication. The Three buckypapers of MWNTs, DWNTs and SWNTs were produced by filtering dispersions of carbon nanotubes which had undergone 30 minutes of pulse sonication in TritonX100. Conductivity and measurements of the three buckypaper (SWNT,DWNT&MWNT) samples yielded average values of 14.24 , 23 and 19 Scm-1 respectively. Mechanical measurements were determined successfully . Homogeneity in the produced buckypapers were investigated confirming by scanning electron microscopy .
Polymeric carbon nitride-based photocatalysts for photoreforming of biomass d...Pawan Kumar
Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Synthesis and Characterization of Zinc Phthalocyanine-Cellulose Nanocrystal (...Pawan Kumar
We report highly fluorescent cellulose nanocrystals (CNCs) formed by conjugating a carboxylated zinc phthalocyanine (ZnPc) to two different types of CNCs. The conjugated nanocrystals (henceforth called ZnPc@CNCs) were bright green in color and exhibited absorption and emission maxima at ∼690 and ∼715 nm, respectively. The esterification protocol employed to covalently bind carboxylated ZnPc to surface hydroxyl group rich CNCs was expected to result in a monolayer of ZnPc on the surface of the CNCs. However, dynamic light scattering (DLS) studies indicated a large increase in the hydrodynamic radius of CNCs following conjugation to ZnPc, which suggests the binding of multiple ZnPc molecular layers on the CNC surface. This binding could be through co-facial π-stacking of ZnPc, where ZnPc metallophthalocyanine rings are horizontal to the CNC surface. The other possible binding mode would give rise to conjugated systems where ZnPc metallophthalocyanine rings are oriented vertically on the CNC surface. Density functional theory based calculations showed stable geometry following the conjugation protocol that involved covalently attached ester bond formation. The conjugates demonstrated superior performance for potential sensing applications through higher photoluminescence quenching capabilities compared to pristine ZnPc.
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34-xFexO6-δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6-δ (BCNFCo), exhibited an optical absorption edge at ~ 800 nm, p-type conduction and a distinct photoresponse upto 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskite and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm-2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ~ 88%.
Polymeric carbon nitride-based photocatalysts for photoreforming of biomass d...Pawan Kumar
Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Arrays of TiO2 nanorods embedded with fluorine doped carbon nitride quantum d...Pawan Kumar
Graphenic semiconductors such as carbon nitride are attracting increasing attention as photocatalysts due to their chemical stability, visible light absorption and excellent electronic properties. The photocatalytic activity of nanostructured TiO2 catalysts is constrained by the wide bandgap and concomitant low visible light responsivity of TiO2. In this context we present the formation of new fluorine doped carbon nitride quantum dots (CNFQDs) by solid state reaction and the subsequent examination of their heterojunctions with TiO2 for photoelectrochemical water splitting. Arrays of rutile phase TiO2 nanorods embedded with CNFQDs were synthesized by a simple in situ hydrothermal approach and the resulting nanomaterials were found to exhibit strong visible light absorption. The energetics at the heterojunction were favorable for efficient electron transfer from CNFQDs to TiO2 under visible light irradiation and …
Arrays of TiO2 nanorods embedded with fluorine doped carbon nitride quantum d...Pawan Kumar
Graphenic semiconductors such as carbon nitride are attracting increasing attention as photocatalysts due to their chemical stability, visible light absorption and excellent electronic properties. The photocatalytic activity of nanostructured TiO2 catalysts is constrained by the wide bandgap and concomitant low visible light responsivity of TiO2. In this context we present the formation of new fluorine doped carbon nitride quantum dots (CNFQDs) by solid state reaction and the subsequent examination of their heterojunctions with TiO2 for photoelectrochemical water splitting. Arrays of rutile phase TiO2 nanorods embedded with CNFQDs were synthesized by a simple in situ hydrothermal approach and the resulting nanomaterials were found to exhibit strong visible light absorption. The energetics at the heterojunction were favorable for efficient electron transfer from CNFQDs to TiO2 under visible light irradiation and transfer of holes to the aqueous electrolyte. CNFQD-sensitized TiO2 nanorods exhibited a strong photoelectrochemical response up to 500 nm. Reuse experiments confirmed robustness and long term stability of the sample without exhausting the catalytic performance. The present work demonstrates a new pathway to sensitize TiO2 to visible photons by the in situ formation of embedded heterojunctions with fluorine doped carbon nitride quantum dots
Noble Metal Free, Visible Light Driven Photocatalysis Using TiO2 Nanotube Arr...Pawan Kumar
Bulk g‐C3N4 is an earth‐abundant, easily synthesizable, and exceptionally stable photocatalyst with an electronic bandgap of 2.7 eV. Herein, the concepts of P‐doping and size quantization are combined to synthesize highly fluorescent P‐doped carbon nitride quantum dots (CNPQDs) with a bandgap of 2.1 eV. CNPQDs are hosted on anatase‐phase and rutile‐phase TiO2 nanotube array scaffolds, and examined as photoanodes for sunlight‐driven water‐splitting and as photocatalysts for surface catalytic reactions. Square‐shaped rutile phase TiO2 nanotube arrays (STNAs) decorated with CNPQDs (CNPQD‐STNA) generate 2.54 mA cm−2 photocurrent under AM1.5 G simulated sunlight. A champion hydrogen evolution rate of 22 µmol h−1 corresponds to a Faradaic efficiency of 93.2%. In conjunction with Ag nanoparticles (NPs), the CNPQD‐STNA hybrid is also found to be an excellent plexcitonic photocatalyst …
Noble Metal Free, Visible Light Driven Photocatalysis Using TiO2 Nanotube Arr...Pawan Kumar
Bulk g‐C3N4 is an earth‐abundant, easily synthesizable, and exceptionally stable photocatalyst with an electronic bandgap of 2.7 eV. Herein, the concepts of P‐doping and size quantization are combined to synthesize highly fluorescent P‐doped carbon nitride quantum dots (CNPQDs) with a bandgap of 2.1 eV. CNPQDs are hosted on anatase‐phase and rutile‐phase TiO2 nanotube array scaffolds, and examined as photoanodes for sunlight‐driven water‐splitting and as photocatalysts for surface catalytic reactions. Square‐shaped rutile phase TiO2 nanotube arrays (STNAs) decorated with CNPQDs (CNPQD‐STNA) generate 2.54 mA cm−2 photocurrent under AM1.5 G simulated sunlight. A champion hydrogen evolution rate of 22 µmol h−1 corresponds to a Faradaic efficiency of 93.2%. In conjunction with Ag nanoparticles (NPs), the CNPQD‐STNA hybrid is also found to be an excellent plexcitonic photocatalyst for the visible light‐driven transformation of 4‐nitrobenzenethiol (4‐NBT) to dimercaptoazobenzene (DMAB), producing reaction completion at a laser power of 1 mW (532 nm) while Ag NP/TNA and Ag NP/STNA photocatalysts cannot complete this transformation even at 10 mW laser power. The results point the way forward for photochemically robust, noble metal free, visible light harvesting photoacatalysts based on nanostructured heterojunctions of graphenic frameworks with TiO2.
Quantum dots for optoelectronic devices - phdassistancePhD Assistance
Nanometre-scale semiconductor chips have been imagined as next-generation technology with high functionality and convergence. Quantum dots, also known as artificial atoms, have special properties owing to their quantum confinement in all three dimensions. Quantum dots have a lot of interest in optoelectronic systems because of their special properties.
For decades, self-assembled nanostructures have been a topic of considerable concern and significance.
Learn More:https://bit.ly/3xJJAiZ
Contact Us:
Website: https://www.phdassistance.com/
UK: +44 7537144372
India No:+91-9176966446
Email: info@phdassistance.com
TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Dr...Pawan Kumar
The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace
plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and costeffective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of
atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity
for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) a
large bandgap between optical and acoustic phonon modes (2) and no electronic bandgap, which
allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in
this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing
plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that
extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active
HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.
Flexible and Ultrasoft Inorganic 1D Semiconductor and Heterostructure Systems...Pawan Kumar
Low dimensionality and high flexibility are key demands for flexible electronic semiconductor devices. SnIP, the first atomic-scale double helical semiconductor combines structural anisotropy and robustness with exceptional electronic properties. The benefit of the double helix, combined with a diverse structure on the nanoscale, ranging from strong covalent bonding to weak van der Waals interactions, and the large structure and property anisotropy offer substantial potential for applications in energy conversion and water splitting. It represents the next logical step in downscaling the inorganic semiconductors from classical 3D systems, via 2D semiconductors like MXenes or transition metal dichalcogenides, to the first downsizeable, polymer-like atomic-scale 1D semiconductor SnIP. SnIP shows intriguing mechanical properties featuring a bulk modulus three times lower than any IV, III-V, or II-VI semiconductor. In situ bending tests substantiate that pure SnIP fibers can be bent without an effect on their bonding properties. Organic and inorganic hybrids are prepared illustrating that SnIP is a candidate to fabricate flexible 1D composites for energy conversion and water splitting applications. SnIP@C3N4 hybrid forms an unusual soft material core–shell topology with graphenic carbon nitride wrapping around SnIP. A 1D van der Waals heterostructure is formed capable of performing effective water splitting.
The present work demonstrates for the first time the facile fabrication of TiO2
nanotube arrays (TNTAs) by a fluoride-free
solid-state anodization process using LiClO4
containing solid polymeric electrolyte. The resulting nanotubes were tested
for photoelectrochemical water splitting. The elimination of liquid electrolytes in electrochemical anodization constitutes
a paradigm shift for the formation of nanoporous and nanotubular metal oxides. Our results open a new area of research
that uses the distinctive properties of solid polymer electrolytes to achieve targeted doping and nano-morphologies. Characterization
of the grown TNTAs indicated solid state anodized TNTAs to consist purely of the anatase phase of titania.
The solid-state anodization process provides several advantages over conventional liquid electrolytes such as easy handling
and processing, better charge transport, environmentally benign chemicals and methodology. Photoelectrochemical water
splitting experiments were performed which confirmed the viability of TNTAs grown by the new solid-state process for
photocatalytic applications.
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34-xFexO6-δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6-δ (BCNFCo), exhibited an optical absorption edge at ~ 800 nm, p-type conduction and a distinct photoresponse upto 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskite and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm-2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ~ 88%.
Polymeric carbon nitride-based photocatalysts for photoreforming of biomass d...Pawan Kumar
Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Arrays of TiO2 nanorods embedded with fluorine doped carbon nitride quantum d...Pawan Kumar
Graphenic semiconductors such as carbon nitride are attracting increasing attention as photocatalysts due to their chemical stability, visible light absorption and excellent electronic properties. The photocatalytic activity of nanostructured TiO2 catalysts is constrained by the wide bandgap and concomitant low visible light responsivity of TiO2. In this context we present the formation of new fluorine doped carbon nitride quantum dots (CNFQDs) by solid state reaction and the subsequent examination of their heterojunctions with TiO2 for photoelectrochemical water splitting. Arrays of rutile phase TiO2 nanorods embedded with CNFQDs were synthesized by a simple in situ hydrothermal approach and the resulting nanomaterials were found to exhibit strong visible light absorption. The energetics at the heterojunction were favorable for efficient electron transfer from CNFQDs to TiO2 under visible light irradiation and …
Arrays of TiO2 nanorods embedded with fluorine doped carbon nitride quantum d...Pawan Kumar
Graphenic semiconductors such as carbon nitride are attracting increasing attention as photocatalysts due to their chemical stability, visible light absorption and excellent electronic properties. The photocatalytic activity of nanostructured TiO2 catalysts is constrained by the wide bandgap and concomitant low visible light responsivity of TiO2. In this context we present the formation of new fluorine doped carbon nitride quantum dots (CNFQDs) by solid state reaction and the subsequent examination of their heterojunctions with TiO2 for photoelectrochemical water splitting. Arrays of rutile phase TiO2 nanorods embedded with CNFQDs were synthesized by a simple in situ hydrothermal approach and the resulting nanomaterials were found to exhibit strong visible light absorption. The energetics at the heterojunction were favorable for efficient electron transfer from CNFQDs to TiO2 under visible light irradiation and transfer of holes to the aqueous electrolyte. CNFQD-sensitized TiO2 nanorods exhibited a strong photoelectrochemical response up to 500 nm. Reuse experiments confirmed robustness and long term stability of the sample without exhausting the catalytic performance. The present work demonstrates a new pathway to sensitize TiO2 to visible photons by the in situ formation of embedded heterojunctions with fluorine doped carbon nitride quantum dots
Noble Metal Free, Visible Light Driven Photocatalysis Using TiO2 Nanotube Arr...Pawan Kumar
Bulk g‐C3N4 is an earth‐abundant, easily synthesizable, and exceptionally stable photocatalyst with an electronic bandgap of 2.7 eV. Herein, the concepts of P‐doping and size quantization are combined to synthesize highly fluorescent P‐doped carbon nitride quantum dots (CNPQDs) with a bandgap of 2.1 eV. CNPQDs are hosted on anatase‐phase and rutile‐phase TiO2 nanotube array scaffolds, and examined as photoanodes for sunlight‐driven water‐splitting and as photocatalysts for surface catalytic reactions. Square‐shaped rutile phase TiO2 nanotube arrays (STNAs) decorated with CNPQDs (CNPQD‐STNA) generate 2.54 mA cm−2 photocurrent under AM1.5 G simulated sunlight. A champion hydrogen evolution rate of 22 µmol h−1 corresponds to a Faradaic efficiency of 93.2%. In conjunction with Ag nanoparticles (NPs), the CNPQD‐STNA hybrid is also found to be an excellent plexcitonic photocatalyst …
Noble Metal Free, Visible Light Driven Photocatalysis Using TiO2 Nanotube Arr...Pawan Kumar
Bulk g‐C3N4 is an earth‐abundant, easily synthesizable, and exceptionally stable photocatalyst with an electronic bandgap of 2.7 eV. Herein, the concepts of P‐doping and size quantization are combined to synthesize highly fluorescent P‐doped carbon nitride quantum dots (CNPQDs) with a bandgap of 2.1 eV. CNPQDs are hosted on anatase‐phase and rutile‐phase TiO2 nanotube array scaffolds, and examined as photoanodes for sunlight‐driven water‐splitting and as photocatalysts for surface catalytic reactions. Square‐shaped rutile phase TiO2 nanotube arrays (STNAs) decorated with CNPQDs (CNPQD‐STNA) generate 2.54 mA cm−2 photocurrent under AM1.5 G simulated sunlight. A champion hydrogen evolution rate of 22 µmol h−1 corresponds to a Faradaic efficiency of 93.2%. In conjunction with Ag nanoparticles (NPs), the CNPQD‐STNA hybrid is also found to be an excellent plexcitonic photocatalyst for the visible light‐driven transformation of 4‐nitrobenzenethiol (4‐NBT) to dimercaptoazobenzene (DMAB), producing reaction completion at a laser power of 1 mW (532 nm) while Ag NP/TNA and Ag NP/STNA photocatalysts cannot complete this transformation even at 10 mW laser power. The results point the way forward for photochemically robust, noble metal free, visible light harvesting photoacatalysts based on nanostructured heterojunctions of graphenic frameworks with TiO2.
Quantum dots for optoelectronic devices - phdassistancePhD Assistance
Nanometre-scale semiconductor chips have been imagined as next-generation technology with high functionality and convergence. Quantum dots, also known as artificial atoms, have special properties owing to their quantum confinement in all three dimensions. Quantum dots have a lot of interest in optoelectronic systems because of their special properties.
For decades, self-assembled nanostructures have been a topic of considerable concern and significance.
Learn More:https://bit.ly/3xJJAiZ
Contact Us:
Website: https://www.phdassistance.com/
UK: +44 7537144372
India No:+91-9176966446
Email: info@phdassistance.com
TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Dr...Pawan Kumar
The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace
plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and costeffective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of
atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity
for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) a
large bandgap between optical and acoustic phonon modes (2) and no electronic bandgap, which
allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in
this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing
plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that
extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active
HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.
Flexible and Ultrasoft Inorganic 1D Semiconductor and Heterostructure Systems...Pawan Kumar
Low dimensionality and high flexibility are key demands for flexible electronic semiconductor devices. SnIP, the first atomic-scale double helical semiconductor combines structural anisotropy and robustness with exceptional electronic properties. The benefit of the double helix, combined with a diverse structure on the nanoscale, ranging from strong covalent bonding to weak van der Waals interactions, and the large structure and property anisotropy offer substantial potential for applications in energy conversion and water splitting. It represents the next logical step in downscaling the inorganic semiconductors from classical 3D systems, via 2D semiconductors like MXenes or transition metal dichalcogenides, to the first downsizeable, polymer-like atomic-scale 1D semiconductor SnIP. SnIP shows intriguing mechanical properties featuring a bulk modulus three times lower than any IV, III-V, or II-VI semiconductor. In situ bending tests substantiate that pure SnIP fibers can be bent without an effect on their bonding properties. Organic and inorganic hybrids are prepared illustrating that SnIP is a candidate to fabricate flexible 1D composites for energy conversion and water splitting applications. SnIP@C3N4 hybrid forms an unusual soft material core–shell topology with graphenic carbon nitride wrapping around SnIP. A 1D van der Waals heterostructure is formed capable of performing effective water splitting.
Effect of metal dopant on photocatalytic performance of TiO2 nano particles
Similar to Vapor growth of binary and ternary phosphorusbased semiconductors into TiO2 nanotube arrays and application in visible light driven water splitting
The present work demonstrates for the first time the facile fabrication of TiO2
nanotube arrays (TNTAs) by a fluoride-free
solid-state anodization process using LiClO4
containing solid polymeric electrolyte. The resulting nanotubes were tested
for photoelectrochemical water splitting. The elimination of liquid electrolytes in electrochemical anodization constitutes
a paradigm shift for the formation of nanoporous and nanotubular metal oxides. Our results open a new area of research
that uses the distinctive properties of solid polymer electrolytes to achieve targeted doping and nano-morphologies. Characterization
of the grown TNTAs indicated solid state anodized TNTAs to consist purely of the anatase phase of titania.
The solid-state anodization process provides several advantages over conventional liquid electrolytes such as easy handling
and processing, better charge transport, environmentally benign chemicals and methodology. Photoelectrochemical water
splitting experiments were performed which confirmed the viability of TNTAs grown by the new solid-state process for
photocatalytic applications.
We'd like to understand how you use our websites in order to improve them. Re...Pawan Kumar
The present work demonstrates for the first time the facile fabrication of TiO2 nanotube arrays (TNTAs) by a fluoride-free solid-state anodization process using LiClO4 containing solid polymeric electrolyte. The resulting nanotubes were tested for photoelectrochemical water splitting. The elimination of liquid electrolytes in electrochemical anodization constitutes a paradigm shift for the formation of nanoporous and nanotubular metal oxides. Our results open a new area of research that uses the distinctive properties of solid polymer electrolytes to achieve targeted doping and nano-morphologies. Characterization of the grown TNTAs indicated solid state anodized TNTAs to consist purely of the anatase phase of titania. The solid-state anodization process provides several advantages over conventional liquid electrolytes such as easy handling and processing, better charge transport, environmentally benign …
Nanophotonic enhancement and improved electron extraction in perovskite solar...Pawan Kumar
While vertically oriented metal oxide nanowires have been intensely researched for use as electron transport layers (ETLs) in halide perovskite solar cells (HPSCs), horizontal nanowires (oriented roughly parallel to the substrate) have received much less attention despite their higher photonic strength due to overlapping electric and magnetic dipolar Mie resonance modes. Herein, we demonstrate the fabrication of an assembly of horizontally aligned TiO2 nanorods (HATNRs) on FTO substrates via a facile hydrothermal route. The HATNRs are employed as the ETL to achieve 15.03% power conversion efficiency (PCE) in HPSCs which is higher than the PCE of compact TiO2 based devices (10.12%) by a factor of nearly 1.5. A mixed halide, mixed cation organometal perovskite FA0.83MA0.17Pb(Br0.17I0.83)3 with optimized composition is used as the active layer. The excellent refractive index matching between the perovskite and TiO2, coupled with strong Mie scattering in the nanorod geometry results in broadband near-zero backscattering and high forward scattering, upon coating of HATNRs with perovskite. The maximum suppression of backscattering is found at ∼600 nm. The HATNRs ETL also improves the extraction of electrons from the perovskite layer and results in superior blocking of carrier recombination at the perovskite layer/FTO interface.
Nanophotonic enhancement and improved electron extraction in perovskite solar...Pawan Kumar
While vertically oriented metal oxide nanowires have been intensely researched for use as electron transport layers (ETLs) in halide perovskite solar cells (HPSCs), horizontal nanowires (oriented roughly parallel to the substrate) have received much less attention despite their higher photonic strength due to overlapping electric and magnetic dipolar Mie resonance modes. Herein, we demonstrate the fabrication of an assembly of horizontally aligned TiO2 nanorods (HATNRs) on FTO substrates via a facile hydrothermal route. The HATNRs are employed as the ETL to achieve 15.03% power conversion efficiency (PCE) in HPSCs which is higher than the PCE of compact TiO2 based devices (10.12%) by a factor of nearly 1.5. A mixed halide, mixed cation organometal perovskite FA0.83MA0.17Pb(Br0.17I0.83)3 with optimized composition is used as the active layer. The excellent refractive index matching between the …
Enhanced charge separation in gC 3 N 4–BiOI heterostructures for visible ligh...Pawan Kumar
Heterojunctions of the low bandgap semiconductor bismuth oxyiodide (BiOI) with bulk multilayered graphitic carbon nitride (g-C3N4) and few layered graphitic carbon nitride sheets (g-C3N4-S) are synthesized and investigated as an active photoanode material for sunlight driven water splitting. HR-TEM and elemental mapping reveals formation of a unique heterostructure between BiOI platelets and the carbon nitride (g-C3N4 and g-C3N4-S) network that consisted of dendritic BiOI nanoplates surrounded by g-C3N4 sheets. The presence of BiOI in g-C3N4-S/BiOI and g-C3N4-S/BiOI nanocomposites extends the visible light absorption profile from 500 nm up to 650 nm. Due to excellent charge separation in g-C3N4/BiOI and g-C3N4-S/BiOI, evident from quenching of the carbon nitride photoluminescence (PL) and a decrease in the PL lifetime, a significant increase in photoelectrochemical performance is observed …
Enhanced charge separation in g-C3N4–BiOI heterostructures for visible light ...Pawan Kumar
Heterojunctions of the low bandgap semiconductor bismuth oxyiodide (BiOI) with bulk multilayered
graphitic carbon nitride (g-C3N4) and few layered graphitic carbon nitride sheets (g-C3N4-S) are
synthesized and investigated as an active photoanode material for sunlight driven water splitting. HRTEM
and elemental mapping reveals formation of a unique heterostructure between BiOI platelets and
the carbon nitride (g-C3N4 and g-C3N4-S) network that consisted of dendritic BiOI nanoplates
surrounded by g-C3N4 sheets. The presence of BiOI in g-C3N4-S/BiOI and g-C3N4-S/BiOI
nanocomposites extends the visible light absorption profile from 500 nm up to 650 nm. Due to excellent
charge separation in g-C3N4/BiOI and g-C3N4-S/BiOI, evident from quenching of the carbon nitride
photoluminescence (PL) and a decrease in the PL lifetime, a significant increase in photoelectrochemical
performance is observed for both types of g-C3N4–BiOI heterojunctions. In comparison to
heterojunctions of bulk g-C3N4 with BiOI, the nanocomposite consisting of few layered sheets of g-
C3N4 and BiOI exhibits higher photocurrent density due to lower recombination in few layered sheets. A
synergistic trap passivation and charge separation is found to occur in the g-C3N4-S/BiOI
nanocomposite heterostructure which results in a higher photocurrent and a lower charge transfer
resistance.
Carbon-cuprous oxide composite nanoparticles
were chemically deposited on surface of thin glass tubes of spent
energy saving lamps for solar heat collection. Carbon was
obtained from fly ash of heavy oil incomplete combustion in
electric power stations. Impurities in the carbon were removed by
leaching with mineral acids. The mineral free-carbon was then
wet ground to have a submicron size. After filtration, it was
reacted with concentrated sulfuric/fuming nitric acid mixture on
cold for 3-4 days. Potassium chlorate was then added drop wise on
hot conditions to a carbon slurry followed by filtration.
Nanocarbon sample was mixed with 5% by weight PVA to help
adhesion to the glass surface. Carbon so deposited was doped with
copper nitrate solution. After dryness, the carbon/copper nitrate
film was dipped in hydrazine hydrate to form cuprous oxide -
carbon composite, It was then roasted at 380-400 °C A heat
collector testing assembly was constructed of 5 glass coils
connected in series with a total surface area of 1250 cm2
. Heat
collection was estimated by water flowing in the glass coils that
are coated with the carbon/copper film,. Parameters affecting the
solar collection efficiency such as time of exposure and mass flow
rate of the water were studied. Results revealed that the prepared
glass coil has proven successful energy collector for solar heat.
Electrochemical study of anatase TiO2 in aqueous sodium-ion electrolytesRatnakaram Venkata Nadh
In this paper, a basic electro-analytical study on the behavior of anatase TiO2 in aqueous NaOH has been presented using cyclic voltammetry technique (CV). The study has explored the possibility of using TiO2 as anode material for ARSBs in presence of 5 M NaOH aqueous electrolyte. CV profiles show that anatase TiO2 exhibits reversible sodium ion insertion/de-insertion reactions. CV studies of TiO2 anode in aqueous sodium electrolytes at different scan rate shows that the Na+ ion insertion reaction at the electrode is diffusion controlled with a resistive behavior. Proton insertion from aqueous sodium electrolytes into TiO2 cannot be ruled out. To confirm the ion inserted and de-inserted, CV studies are done at different concentration of NaOH and it is found that at lower concentrations of NaOH, proton insertion process competes with Na+ ion insertion process and as the concentration increases, the Na+ ion insertion process becomes the predominant electrode reaction making it suitable anode materials for aqueous sodium batteries in 5 M NaOH.
Enhanced charge separation in g-C3N4–BiOI heterostructures for visible light ...Pawan Kumar
Heterojunctions of the low bandgap semiconductor bismuth oxyiodide (BiOI) with bulk multilayered
graphitic carbon nitride (g-C3N4) and few layered graphitic carbon nitride sheets (g-C3N4-S) are
synthesized and investigated as an active photoanode material for sunlight driven water splitting. HRTEM and elemental mapping reveals formation of a unique heterostructure between BiOI platelets and
the carbon nitride (g-C3N4 and g-C3N4-S) network that consisted of dendritic BiOI nanoplates
surrounded by g-C3N4 sheets. The presence of BiOI in g-C3N4-S/BiOI and g-C3N4-S/BiOI
nanocomposites extends the visible light absorption profile from 500 nm up to 650 nm. Due to excellent
charge separation in g-C3N4/BiOI and g-C3N4-S/BiOI, evident from quenching of the carbon nitride
photoluminescence (PL) and a decrease in the PL lifetime, a significant increase in photoelectrochemical
performance is observed for both types of g-C3N4–BiOI heterojunctions. In comparison to
heterojunctions of bulk g-C3N4 with BiOI, the nanocomposite consisting of few layered sheets of gC3N4 and BiOI exhibits higher photocurrent density due to lower recombination in few layered sheets. A
synergistic trap passivation and charge separation is found to occur in the g-C3N4-S/BiOI
nanocomposite heterostructure which results in a higher photocurrent and a lower charge transfer
resistance.
Synthesis, Characterization of ZnS nanoparticles by Coprecipitation method us...IOSR Journals
ZnS nanoparticles are prepared by coprecipitation method using various capping agents like PVP (polyvinylpyrrolidone), PVA (polyvinylalcohol) and PEG-4000 (polyethyleneglycol). These are characterized by UV-Visible spectra, X-ray diffraction (XRD) studies, Fourier Transform Infra-red spectra (FTIR) and Transmission electron microscopy (TEM). UV-Visible absorption spectra are used to find the optical band gap and the values obtained have been found to be in the range of 3.80-4.00eV. The particle size of nanoparticles calculated from XRD pattern has been in the range of 2-4 nm. It is also observed that the particle size of nanoparticle is affected by the nature of capping agent. Photo catalytic degradation of xylenol orange (XO) by the nanoparticles shows that these act as photo catalysts under sunlight irradiation. The XO dye was degraded more than 87.24, 83.42 and 73.05% in the presence of PEG-4000, PVA and PVP capped ZnS nanoparticles in 120, 150 and 180 min. respectively. The kinetics of catalyzed by synthesized ZnS nanoparticles with XO dye follows pseudo-first order kinetics with reasonable apparent rate constants.
A perovskite solar cell is a type of solar cell which includes a perovskite structured compound, most commonly a hybrid organic-inorganic lead or tin halide-based material, as the light-harvesting active layer.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
The effect of band engineering of semiconductors on photocatalyic water split...eSAT Journals
Abstract
The direct conversion of solar energy using a photocatalyst in a water splitting reaction is a source of a sustainable and clean hydrogen supply. In general, photocatalysts are semiconductors that possess valence and conduction bands. These energy bands permit the absorption of photon energy to excite electrons in the outer orbitals of the photocatalysts. Photoexcited electron and hole pairs can subsequently induce a watersplitting reaction to produce hydrogen and oxygen. Photocatalytic water splitting is affected by the band level and crystallinity of the photocatalyst. Therefore, band engineering using chemical modifications such as cationic and anionic modification could createa photocatalyst suitable for the large-scale production of hydrogen. In this paper, cationic and anionic modifications of photocatalysts and the effects of these modifications onphotocatalytic water splitting are reviewed. Keywords: Water splitting; Photocatalysis; Hydrogen
Similar to Vapor growth of binary and ternary phosphorusbased semiconductors into TiO2 nanotube arrays and application in visible light driven water splitting (20)
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Recent advancements in tuning the electronic structures of transitional metal...Pawan Kumar
The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future.
Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications.
Multifunctional carbon nitride nanoarchitectures for catalysisPawan Kumar
Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.
Production of Renewable Fuels by the Photocatalytic Reduction of CO2 using Ma...Pawan Kumar
The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1.
Nanoengineered Au-Carbon Nitride Interfaces Enhance PhotoCatalytic Pure Water...Pawan Kumar
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.
Nanoengineered Au-Carbon Nitride Interfaces Enhance Photo-Catalytic Pure Wate...Pawan Kumar
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.
Cooperative Copper Single Atom Catalyst in Two-dimensional Carbon Nitride for...Pawan Kumar
Renewable electricity powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction still suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. Herein, we exploit two-dimensional carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), to host Cu-N2 type single atom sites with high density (∼1.5 at%), via a facile metal ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm−2 at a low potential of -0.84 V versus RHE, surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the two matrices and how the Cu-Cu distance and local environment dictate the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.
Bioinspired multimetal electrocatalyst for selective methane oxidationPawan Kumar
Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode.
A brief information about the SCOP protein database used in bioinformatics.
The Structural Classification of Proteins (SCOP) database is a comprehensive and authoritative resource for the structural and evolutionary relationships of proteins. It provides a detailed and curated classification of protein structures, grouping them into families, superfamilies, and folds based on their structural and sequence similarities.
Multi-source connectivity as the driver of solar wind variability in the heli...Sérgio Sacani
The ambient solar wind that flls the heliosphere originates from multiple
sources in the solar corona and is highly structured. It is often described
as high-speed, relatively homogeneous, plasma streams from coronal
holes and slow-speed, highly variable, streams whose source regions are
under debate. A key goal of ESA/NASA’s Solar Orbiter mission is to identify
solar wind sources and understand what drives the complexity seen in the
heliosphere. By combining magnetic feld modelling and spectroscopic
techniques with high-resolution observations and measurements, we show
that the solar wind variability detected in situ by Solar Orbiter in March
2022 is driven by spatio-temporal changes in the magnetic connectivity to
multiple sources in the solar atmosphere. The magnetic feld footpoints
connected to the spacecraft moved from the boundaries of a coronal hole
to one active region (12961) and then across to another region (12957). This
is refected in the in situ measurements, which show the transition from fast
to highly Alfvénic then to slow solar wind that is disrupted by the arrival of
a coronal mass ejection. Our results describe solar wind variability at 0.5 au
but are applicable to near-Earth observatories.
THE IMPORTANCE OF MARTIAN ATMOSPHERE SAMPLE RETURN.Sérgio Sacani
The return of a sample of near-surface atmosphere from Mars would facilitate answers to several first-order science questions surrounding the formation and evolution of the planet. One of the important aspects of terrestrial planet formation in general is the role that primary atmospheres played in influencing the chemistry and structure of the planets and their antecedents. Studies of the martian atmosphere can be used to investigate the role of a primary atmosphere in its history. Atmosphere samples would also inform our understanding of the near-surface chemistry of the planet, and ultimately the prospects for life. High-precision isotopic analyses of constituent gases are needed to address these questions, requiring that the analyses are made on returned samples rather than in situ.
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...Ana Luísa Pinho
Functional Magnetic Resonance Imaging (fMRI) provides means to characterize brain activations in response to behavior. However, cognitive neuroscience has been limited to group-level effects referring to the performance of specific tasks. To obtain the functional profile of elementary cognitive mechanisms, the combination of brain responses to many tasks is required. Yet, to date, both structural atlases and parcellation-based activations do not fully account for cognitive function and still present several limitations. Further, they do not adapt overall to individual characteristics. In this talk, I will give an account of deep-behavioral phenotyping strategies, namely data-driven methods in large task-fMRI datasets, to optimize functional brain-data collection and improve inference of effects-of-interest related to mental processes. Key to this approach is the employment of fast multi-functional paradigms rich on features that can be well parametrized and, consequently, facilitate the creation of psycho-physiological constructs to be modelled with imaging data. Particular emphasis will be given to music stimuli when studying high-order cognitive mechanisms, due to their ecological nature and quality to enable complex behavior compounded by discrete entities. I will also discuss how deep-behavioral phenotyping and individualized models applied to neuroimaging data can better account for the subject-specific organization of domain-general cognitive systems in the human brain. Finally, the accumulation of functional brain signatures brings the possibility to clarify relationships among tasks and create a univocal link between brain systems and mental functions through: (1) the development of ontologies proposing an organization of cognitive processes; and (2) brain-network taxonomies describing functional specialization. To this end, tools to improve commensurability in cognitive science are necessary, such as public repositories, ontology-based platforms and automated meta-analysis tools. I will thus discuss some brain-atlasing resources currently under development, and their applicability in cognitive as well as clinical neuroscience.
Richard's aventures in two entangled wonderlandsRichard Gill
Since the loophole-free Bell experiments of 2020 and the Nobel prizes in physics of 2022, critics of Bell's work have retreated to the fortress of super-determinism. Now, super-determinism is a derogatory word - it just means "determinism". Palmer, Hance and Hossenfelder argue that quantum mechanics and determinism are not incompatible, using a sophisticated mathematical construction based on a subtle thinning of allowed states and measurements in quantum mechanics, such that what is left appears to make Bell's argument fail, without altering the empirical predictions of quantum mechanics. I think however that it is a smoke screen, and the slogan "lost in math" comes to my mind. I will discuss some other recent disproofs of Bell's theorem using the language of causality based on causal graphs. Causal thinking is also central to law and justice. I will mention surprising connections to my work on serial killer nurse cases, in particular the Dutch case of Lucia de Berk and the current UK case of Lucy Letby.
Richard's entangled aventures in wonderlandRichard Gill
Since the loophole-free Bell experiments of 2020 and the Nobel prizes in physics of 2022, critics of Bell's work have retreated to the fortress of super-determinism. Now, super-determinism is a derogatory word - it just means "determinism". Palmer, Hance and Hossenfelder argue that quantum mechanics and determinism are not incompatible, using a sophisticated mathematical construction based on a subtle thinning of allowed states and measurements in quantum mechanics, such that what is left appears to make Bell's argument fail, without altering the empirical predictions of quantum mechanics. I think however that it is a smoke screen, and the slogan "lost in math" comes to my mind. I will discuss some other recent disproofs of Bell's theorem using the language of causality based on causal graphs. Causal thinking is also central to law and justice. I will mention surprising connections to my work on serial killer nurse cases, in particular the Dutch case of Lucia de Berk and the current UK case of Lucy Letby.
What is greenhouse gasses and how many gasses are there to affect the Earth.moosaasad1975
What are greenhouse gasses how they affect the earth and its environment what is the future of the environment and earth how the weather and the climate effects.