This document is a resume for Alex Vasilchenko for the position of die setter/machine operator. It summarizes his qualifications including over 4 years of experience in the role. It details his skills operating various presses from 30 to 300 tons, as well as other machines. It lists his abilities to read blueprints, set up tools, ensure quality control, and make adjustments to produce good parts within specifications. His experience includes work at Custom Stamping MFG and Exova as a CNC and manual machine operator.

1. Die Setter/Machine Operator
Alex Vasilchenko
14731 Holcomb Blvd , Oregon City, OR 97045 503-723-4534-home 503-913-2772-cell
HIGHLIGHTS OF QUALIFICATIONS
 More than 4 years of experience as a die setter/machine operator
 Punctual, dependable, and hard working
 Organized and detail-oriented
 Ability to perform multiple tasks in a fast-paced environment
 Able to read Blueprints ,specs, and find ways to do a setup to get a good part
SKILLS AND EXPERIENCE
Machine Operations/set up/Quality control
 Set up and operated manual presses and line presses (30,45,60,100,200, and 300 ton presses)
 Used forklift to install/remove dies
 Used different measuring instruments, including caliper, vanier caliper, gauge pins, go/no go gauges, height
gauges, straight edge , optical comparator, protractor , and various angle gauges
 ±.001--±.005 was the most common dimensions we worked with
 Was required to make good parts that meet requirements of the print
 Pulled job orders in the right order and made sure that job for next step is ready
 Took die to the die shop for change-over or did it myself if it was in the press change-over
 Operated sheer, spot welding machines, various drill machines, degreasing machines
 Also did complete set ups of universal punch and die
 Used forklift and die carts to install/pull the die.
 Inspected part in the middle of a run to make sure part is still good ,if not ,made proper adjustments to the
machine
 Operated line presses with stock straighteners
 Installed coils with forklift, removed, rebanded and put away
 Adjusted Air Cushion for channel dies and adjusted Knockout bar
 Also used Templates on a Hamilton press with Universal Tooling
Custom Stamping, MFG.Co Portland, OR (Jun 2011 to Jan 2016)
Exova (AeroSpace,Defence testing lab)---CNC and Manual Machine Operator (Jan 2011 to Feb 2011)
Education --CCC. CNC and Machine Operator Certificate, used surface grinders and various measuring instruments