Download to read offline
Uploaded byYousif Fikry
Ma 012 using working personnel basket
This Job Safety Analysis document outlines the steps and potential hazards involved in using a working basket from a crane. It identifies 4 basic job steps: 1) holding a pre-job meeting to review procedures, 2) preparing the working basket and safety equipment, 3) moving personnel in the basket, and 4) lowering the basket at the end of the job. For each step, potential accidents are listed such as injuries from incorrect procedures, damaged equipment, and improper crane signals. Recommendations are provided to eliminate hazards, such as inspecting equipment, learning signals, and only having one person direct the crane operator. The document was prepared by the company's QA/HSE department and approved by an H.M.
Ma 012 using working personnel basket
- 1. Rig Name/#: BENNEVISJSA Number : MA 012 Person Approving JSA: H.M Work Activity (Job): Using Working Basket Date Raised : Work Team (Crew Members): Crane-Operators & All depts Date Last Amended : Safety Equipment To Do This Job( Hard Hats x Cotton Gloves x Face Shield Fire Extinguishers Safety Boots x Work Vest x Goggles x Lockout/Tagout Safety Glasses x Safety Harness x Barricades x Work Permit Required x Uncontrolled When Printed Page 1 of 2 Sequence of Basic Job Steps Potential Accidents or Hazards Recommendation to Eliminate or Reduce Potential Hazards Who? Initials 1. Hold pre-job meeting – Work-permit 1. Procedures not known or not understood by crew members- Persons involved in task becoming injured by incorrect procedure compliance 1. Take time to read correctly JSA . Be sure everything is understood . If not ask your Supervisor Supervisors 2 . Prepare working basket – Harness – Work vest if necessary - Tools 2. Basket in bad condition – Hands or fingers injuries - Falling in water – Safety equipments in bad condition – Slings or shackles damaged 2. Inspect basket , slings & shackles before use to make sure they are in proper working condition – Check color code & SWL – Be careful of hands placement All Involved 3. Moving personnel with working basket 3. Hands or fingers injuries being caught between basket & equipment – Falling from basket – Swinging out of control – Wrong crane signals done to crane operator 3. Be careful of hands placement – Fix harness correctly – Use tag-line to keep basket steady – Secure basket during job – Learn crane signals – Only one person doing signals – Use work vest if necessary All Involved 4. End of job – Lowering basket 4. Falling from basket – Swinging out of control – Wrong crane signals done to crane operator – Tools falling 4. Fix harness correctly – Use tag-line to keep basket steady – Learn crane signals – Only one person doing signals – Secure tools – Use work vest if necessary All Involved Pyramid Drilling S.A Manual Title: Personnel Safety Manual Form Name: Job Safety Analysis Issue Date 02-Sept-07 Revision No. 2 Revision Date 04-MAR 08 Prepared By QA/HSE Approved By HM Level No. 2
- 2. Uncontrolled When PrintedPage 2 of 2 Pyramid Drilling S.A Manual Title: Personnel Safety Manual Form Name: Job Safety Analysis Issue Date 02-Sept-07 Revision No. 2 Revision Date 04-MAR 08 Prepared By QA/HSE Approved By HM Level No. 2