The document describes the LM741 operational amplifier. Key details include:
- The LM741 is a general purpose operational amplifier that offers improved performance over industry standards like the LM709.
- Features include overload protection on inputs and output, no latch-up when the common mode range is exceeded, and freedom from oscillations.
- The LM741C has the same specifications as the LM741A but is guaranteed to perform over a 0°C to +70°C temperature range rather than -55°C to +125°C.
This document provides information on the LM1458 and LM1558 dual operational amplifiers from Texas Instruments, including:
1. Key features like no frequency compensation required, short-circuit protection, and wide common-mode and differential voltage ranges.
2. A brief description noting they are general purpose dual op-amps that share a common bias network and power supply leads but operate independently.
3. Absolute maximum ratings and electrical characteristics specifying parameters like input offset voltage, supply current, voltage gain, and output voltage swing.
The LM567/LM567C are tone decoders designed to provide a saturated transistor switch output when an input signal is present within the passband. The circuit consists of an I and Q detector driven by a voltage controlled oscillator which determines the center frequency. External components independently set center frequency, bandwidth, and output delay. Features include a 20:1 frequency range adjustable with a resistor, logic compatible output, and bandwidth adjustable from 0 to 14%. Applications include touch tone decoding, frequency monitoring, FSK demodulation, and communications paging decoders.
This document provides an overview of the LM118/LM218/LM318 operational amplifiers. It describes them as precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate, offering improved AC performance over general purpose devices. Key features highlighted include 15 MHz bandwidth, 50V/μs slew rate, and internal frequency compensation. Typical applications discussed include oscillators, active filters, sample and hold circuits, and general purpose amplifiers.
The LM555 is a timer integrated circuit that can generate accurate time delays or oscillations. It can operate in both monostable and astable modes using only external resistors and capacitors. The LM555 provides precision timing for applications such as timing, pulse generation, and pulse width modulation. It can source or sink up to 200mA and is available in 8-pin packages.
The document describes the LM6171 high speed low power low distortion voltage feedback amplifier. Key features include:
- Unity-gain bandwidth of 100 MHz and slew rate of 3600V/μs while consuming only 2.5 mA of supply current.
- Specified for operation with supply voltages of ±15V and ±5V.
- Built on National's advanced VIPTM III complementary bipolar process.
- Suitable for applications such as video amplifiers, line drivers, ADC/DAC buffers, and instrumentation amplifiers.
This document provides specifications for 50W dual output switching power supplies models D-50A and D-50B. The power supplies provide 5V and 12V outputs for model A, and 5V and 24V outputs for model B. Key features include overload and overvoltage protections, adjustable output voltages, and 100% full load burn-in testing. The power supplies have efficiencies of around 73% and dimensions of 159mm x 97mm x 38mm.
This document provides specifications for the RS-150 series 150W single output switching power supply. It has universal AC input, short circuit and over voltage protections, and provides outputs of 3.3V to 48V at currents of up to 30A. Key specifications include efficiency between 75-87%, operating temperature range of -20°C to +70°C, and compliance with various EMC and safety standards.
The document provides information on the LSA 47.2 - 4 Pole alternator, including:
- It is designed for applications like stand-by power generation and meets international standards.
- It has top electrical performance with Class H insulation, voltage regulation accuracy of +/-0.5%, and total harmonic content below 2%.
- It has excitation and regulation systems suited for different applications, including options for paralleling and remote control.
- It has a protection system for different environments and a reinforced mechanical structure using finite element modeling.
- It has an accessible terminal box for optional equipment.
This document provides information on the LM1458 and LM1558 dual operational amplifiers from Texas Instruments, including:
1. Key features like no frequency compensation required, short-circuit protection, and wide common-mode and differential voltage ranges.
2. A brief description noting they are general purpose dual op-amps that share a common bias network and power supply leads but operate independently.
3. Absolute maximum ratings and electrical characteristics specifying parameters like input offset voltage, supply current, voltage gain, and output voltage swing.
The LM567/LM567C are tone decoders designed to provide a saturated transistor switch output when an input signal is present within the passband. The circuit consists of an I and Q detector driven by a voltage controlled oscillator which determines the center frequency. External components independently set center frequency, bandwidth, and output delay. Features include a 20:1 frequency range adjustable with a resistor, logic compatible output, and bandwidth adjustable from 0 to 14%. Applications include touch tone decoding, frequency monitoring, FSK demodulation, and communications paging decoders.
This document provides an overview of the LM118/LM218/LM318 operational amplifiers. It describes them as precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate, offering improved AC performance over general purpose devices. Key features highlighted include 15 MHz bandwidth, 50V/μs slew rate, and internal frequency compensation. Typical applications discussed include oscillators, active filters, sample and hold circuits, and general purpose amplifiers.
The LM555 is a timer integrated circuit that can generate accurate time delays or oscillations. It can operate in both monostable and astable modes using only external resistors and capacitors. The LM555 provides precision timing for applications such as timing, pulse generation, and pulse width modulation. It can source or sink up to 200mA and is available in 8-pin packages.
The document describes the LM6171 high speed low power low distortion voltage feedback amplifier. Key features include:
- Unity-gain bandwidth of 100 MHz and slew rate of 3600V/μs while consuming only 2.5 mA of supply current.
- Specified for operation with supply voltages of ±15V and ±5V.
- Built on National's advanced VIPTM III complementary bipolar process.
- Suitable for applications such as video amplifiers, line drivers, ADC/DAC buffers, and instrumentation amplifiers.
This document provides specifications for 50W dual output switching power supplies models D-50A and D-50B. The power supplies provide 5V and 12V outputs for model A, and 5V and 24V outputs for model B. Key features include overload and overvoltage protections, adjustable output voltages, and 100% full load burn-in testing. The power supplies have efficiencies of around 73% and dimensions of 159mm x 97mm x 38mm.
This document provides specifications for the RS-150 series 150W single output switching power supply. It has universal AC input, short circuit and over voltage protections, and provides outputs of 3.3V to 48V at currents of up to 30A. Key specifications include efficiency between 75-87%, operating temperature range of -20°C to +70°C, and compliance with various EMC and safety standards.
The document provides information on the LSA 47.2 - 4 Pole alternator, including:
- It is designed for applications like stand-by power generation and meets international standards.
- It has top electrical performance with Class H insulation, voltage regulation accuracy of +/-0.5%, and total harmonic content below 2%.
- It has excitation and regulation systems suited for different applications, including options for paralleling and remote control.
- It has a protection system for different environments and a reinforced mechanical structure using finite element modeling.
- It has an accessible terminal box for optional equipment.
The UTC 4051 is an 8-channel analog multiplexer/demultiplexer chip that allows for digitally controlled switching of analog signals. It has three binary control inputs, an inhibit input, and features low on impedance and very low off leakage current. The chip supports analog signal switching across a wide voltage range of 3V to 18V.
This document provides specifications for a 25W single output switching power supply series called RS-25. It includes details on features, specifications, protections, inputs, outputs, safety standards, and mechanical specifications. The power supply comes in multiple models that provide different DC output voltages ranging from 3.3V to 48V at power levels up to 25W. It has protections for short circuits, overloads, and over voltages.
The document describes the Gard series of automatic road barriers for passages up to 3.75 meters/12.3 feet. The barriers come in 230V AC and 24V DC motor versions and have safety and control features like electronic obstacle detection and testing of safety devices. They are suitable for industrial, public, and parking applications.
This document provides specifications for the RS-35 series of 35W single output switching power supplies. It lists 6 models that provide different output voltages ranging from 3.3V to 48V. The power supplies have universal AC input, short circuit and overvoltage protections, and provide well-regulated output voltage with low ripple. Key specifications like output power, current, efficiency and dimensions are provided for each model.
Quantum Composers now provides board level digital delay pulse generators. The 8000 series board products retain all functionality of the standard pulse generators in an easy to integrate package. These boards provide a cost-effective method to create and synchronize multiple sequences, delayed triggering, or any precisely timed series of events. We offer computer interfaces for ease of programming and full integration support.
SPICE MODEL of SSM5H08TU (Standard+BDS+SBDP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SSM5H08TU (Standard+BDS+SBDP) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document summarizes the key specifications and simulation results for an operational amplifier with part number NJU7043 manufactured by New Japan Radio. It includes 3 sentences on the output voltage swing, input offset voltage, and slew rate based on Spice model simulations and compares the results to measurement data.
This document provides specifications for a 75W triple output switching power supply with model numbers NET-75A through NET-75D. It has three output channels that provide different combinations of positive, negative, and ground voltages. It has protections for overloads, over voltages, and short circuits. Key specifications include voltage ranges, current ratings, ripple and noise levels, efficiency ratings, and safety certifications. Dimensions and mechanical details are also provided.
SPICE MODEL of SPW11N60CFD (Professional+BDSP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SPW11N60CFD (Professional+BDSP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of 2SK3611-01MR (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK3611-01MR (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of 2SK3728-01MR (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK3728-01MR (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of 2SK2661 (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK2661 (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
The document summarizes a 30W dual output switching power supply. It has two output channels, model D-30A provides 5V and 12V outputs while D-30B provides 5V and 24V outputs. It features protections for short circuits and overloads, uses free air convection for cooling, and has a 1 year warranty.
SPICE MODEL of 2SK3644-01 (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
This document summarizes the key parameters and simulation results of a power MOSFET transistor and its internal body diode. It includes tables of parameters for the MOSFET and diode models, graphs comparing simulated and measured output characteristics like forward current and switching times, and evaluation circuits used in the simulations. The models aim to accurately represent the electrical behavior of the real components for circuit design and analysis.
The document describes four low power quad operational amplifiers - LM124, LM224, LM324, and LM2902. It provides details on their advantages, features, electrical characteristics and applications. The key points are:
- They are quad op-amps designed to operate from a single power supply over a wide voltage range of 3V to 32V.
- Each op-amp has high gain, wide bandwidth of 1MHz, low offset voltage of 2mV and low supply current of 700uA.
- Applications include transducer amplifiers, DC gain blocks and interfacing analog circuits to digital systems with a 5V power supply.
SPICE MODEL of 2SK2661 (Professional+BDSP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK2661 (Professional+BDSP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document summarizes the PSpice model for the RN1903AFS digital transistor manufactured by Toshiba. It includes parameters for the transistor's electrical characteristics and comparison graphs between simulated and measured values for key characteristics like IC-VI, hFE-IC, and VCE(sat). The simulations show good agreement with measurements, with most errors under 3%.
The MO-RX3400-A is an ASK receiver module that operates at 315/434 MHz frequencies. It uses a single-conversion superheterodyne architecture with an integrated PLL for local oscillator generation. It can demodulate OOK, HCS, and PWM modulated signals into digital outputs. The module has low power consumption, works over a wide temperature range, and is designed for applications such as car security systems, remote controls, and wireless automation.
The document provides information about the LM741 operational amplifier, including:
1) It describes the LM741 as a general purpose operational amplifier that is a direct replacement for similar amplifiers and offers features like overload protection.
2) It provides the schematic diagram and pin connections for the LM741 in different package types.
3) It lists the electrical characteristics and specifications for the LM741, including input/output ratings, gain, bandwidth, slew rate, and more.
The document provides information about the LM741 operational amplifier, including:
1) It describes the LM741 as a general purpose operational amplifier that is a direct replacement for previous models and offers features like overload protection.
2) It provides the schematic diagram and pin connections for the LM741 in different package types.
3) It lists the electrical characteristics and specifications for the LM741 like voltage range, gain, bandwidth, power requirements, and packaging dimensions.
The LM741 series are general purpose operational amplifiers that are direct replacements for popular op amp models. They offer features like overload protection, no latch-up, and stability. The LM741C/E variants have their performance guaranteed over a 0°C to 70°C range instead of -55°C to 125°C. The document provides electrical characteristics for the LM741 models including input offset voltage, bias current, gain, output voltage and current specifications.
The UTC 4051 is an 8-channel analog multiplexer/demultiplexer chip that allows for digitally controlled switching of analog signals. It has three binary control inputs, an inhibit input, and features low on impedance and very low off leakage current. The chip supports analog signal switching across a wide voltage range of 3V to 18V.
This document provides specifications for a 25W single output switching power supply series called RS-25. It includes details on features, specifications, protections, inputs, outputs, safety standards, and mechanical specifications. The power supply comes in multiple models that provide different DC output voltages ranging from 3.3V to 48V at power levels up to 25W. It has protections for short circuits, overloads, and over voltages.
The document describes the Gard series of automatic road barriers for passages up to 3.75 meters/12.3 feet. The barriers come in 230V AC and 24V DC motor versions and have safety and control features like electronic obstacle detection and testing of safety devices. They are suitable for industrial, public, and parking applications.
This document provides specifications for the RS-35 series of 35W single output switching power supplies. It lists 6 models that provide different output voltages ranging from 3.3V to 48V. The power supplies have universal AC input, short circuit and overvoltage protections, and provide well-regulated output voltage with low ripple. Key specifications like output power, current, efficiency and dimensions are provided for each model.
Quantum Composers now provides board level digital delay pulse generators. The 8000 series board products retain all functionality of the standard pulse generators in an easy to integrate package. These boards provide a cost-effective method to create and synchronize multiple sequences, delayed triggering, or any precisely timed series of events. We offer computer interfaces for ease of programming and full integration support.
SPICE MODEL of SSM5H08TU (Standard+BDS+SBDP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SSM5H08TU (Standard+BDS+SBDP) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document summarizes the key specifications and simulation results for an operational amplifier with part number NJU7043 manufactured by New Japan Radio. It includes 3 sentences on the output voltage swing, input offset voltage, and slew rate based on Spice model simulations and compares the results to measurement data.
This document provides specifications for a 75W triple output switching power supply with model numbers NET-75A through NET-75D. It has three output channels that provide different combinations of positive, negative, and ground voltages. It has protections for overloads, over voltages, and short circuits. Key specifications include voltage ranges, current ratings, ripple and noise levels, efficiency ratings, and safety certifications. Dimensions and mechanical details are also provided.
SPICE MODEL of SPW11N60CFD (Professional+BDSP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SPW11N60CFD (Professional+BDSP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of 2SK3611-01MR (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK3611-01MR (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of 2SK3728-01MR (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK3728-01MR (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of 2SK2661 (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK2661 (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
The document summarizes a 30W dual output switching power supply. It has two output channels, model D-30A provides 5V and 12V outputs while D-30B provides 5V and 24V outputs. It features protections for short circuits and overloads, uses free air convection for cooling, and has a 1 year warranty.
SPICE MODEL of 2SK3644-01 (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
This document summarizes the key parameters and simulation results of a power MOSFET transistor and its internal body diode. It includes tables of parameters for the MOSFET and diode models, graphs comparing simulated and measured output characteristics like forward current and switching times, and evaluation circuits used in the simulations. The models aim to accurately represent the electrical behavior of the real components for circuit design and analysis.
The document describes four low power quad operational amplifiers - LM124, LM224, LM324, and LM2902. It provides details on their advantages, features, electrical characteristics and applications. The key points are:
- They are quad op-amps designed to operate from a single power supply over a wide voltage range of 3V to 32V.
- Each op-amp has high gain, wide bandwidth of 1MHz, low offset voltage of 2mV and low supply current of 700uA.
- Applications include transducer amplifiers, DC gain blocks and interfacing analog circuits to digital systems with a 5V power supply.
SPICE MODEL of 2SK2661 (Professional+BDSP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK2661 (Professional+BDSP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document summarizes the PSpice model for the RN1903AFS digital transistor manufactured by Toshiba. It includes parameters for the transistor's electrical characteristics and comparison graphs between simulated and measured values for key characteristics like IC-VI, hFE-IC, and VCE(sat). The simulations show good agreement with measurements, with most errors under 3%.
The MO-RX3400-A is an ASK receiver module that operates at 315/434 MHz frequencies. It uses a single-conversion superheterodyne architecture with an integrated PLL for local oscillator generation. It can demodulate OOK, HCS, and PWM modulated signals into digital outputs. The module has low power consumption, works over a wide temperature range, and is designed for applications such as car security systems, remote controls, and wireless automation.
The document provides information about the LM741 operational amplifier, including:
1) It describes the LM741 as a general purpose operational amplifier that is a direct replacement for similar amplifiers and offers features like overload protection.
2) It provides the schematic diagram and pin connections for the LM741 in different package types.
3) It lists the electrical characteristics and specifications for the LM741, including input/output ratings, gain, bandwidth, slew rate, and more.
The document provides information about the LM741 operational amplifier, including:
1) It describes the LM741 as a general purpose operational amplifier that is a direct replacement for previous models and offers features like overload protection.
2) It provides the schematic diagram and pin connections for the LM741 in different package types.
3) It lists the electrical characteristics and specifications for the LM741 like voltage range, gain, bandwidth, power requirements, and packaging dimensions.
The LM741 series are general purpose operational amplifiers that are direct replacements for popular op amp models. They offer features like overload protection, no latch-up, and stability. The LM741C/E variants have their performance guaranteed over a 0°C to 70°C range instead of -55°C to 125°C. The document provides electrical characteristics for the LM741 models including input offset voltage, bias current, gain, output voltage and current specifications.
The LM555 is a timer integrated circuit that can generate accurate time delays or oscillations. It can operate in both monostable and astable modes using only external resistors and capacitors. The LM555 provides precision timing for applications such as timing, pulse generation, and pulse width modulation. It can source or sink up to 200mA and is available in 8-pin packages.
This document provides information on the LPC662 low power CMOS dual operational amplifier:
- It is ideal for single supply operation from +5V to +15V with rail-to-rail output swing and input common-mode range including ground.
- Key features include micropower operation (<0.5mW), high voltage gain (120dB), low input offset voltage (3mV), and ultra low input bias current (2fA).
- Applications include high-impedance buffer, precision current-to-voltage converter, long-term integrator, high-impedance preamplifier, active filter, sample-and-hold circuit, and peak detector.
The document provides information about the LM741 operational amplifier, including:
- It is a general purpose operational amplifier that offers improved performance over earlier standards.
- The LM741C/E variants guarantee performance over a 0-70°C range instead of -55-125°C.
- It provides specifications for inputs, outputs, gains, offsets, bandwidth, power requirements and packaging options.
The document describes dual operational amplifiers - the LM2904, LM358/LM358A, and LM258/LM258A. These devices consist of two independent op-amps designed to operate from a single power supply over a wide voltage range of 3V to 32V. They feature high gain, frequency compensation, and can source or sink output currents up to 30mA. The document provides detailed specifications, electrical characteristics, typical performance curves, and mechanical dimensions of the 8-pin DIP package for the devices.
The document provides information on the MUR8100E and MUR880E ultrafast rectifier diodes from ON Semiconductor. The diodes are designed for use in switching power supplies, inverters, and as free wheeling diodes. Key features include a 20mJ avalanche energy rating, 175°C operating junction temperature, and packaging in a TO-220 case. Electrical characteristics including forward voltage, reverse current, and reverse recovery time are specified. Maximum ratings and derating curves are also given.
The document describes the LM124 series of low power quad operational amplifiers. It provides specifications for the amplifiers including their ability to operate from a single power supply over a wide voltage range, low current drain, high gain, wide bandwidth, and temperature stability. Application areas are listed as transducer amplifiers, DC gain blocks, and conventional op amp circuits that can now be implemented in single power supply systems.
This document provides information on the LM1575, LM1575HV, LM2575, and LM2575HV series of step-down voltage regulators that can drive a 1A load. These regulators are integrated circuits that perform all the necessary functions of a buck switching regulator using a minimal number of external components. They have fixed output voltages of 3.3V, 5V, 12V, or 15V or an adjustable output, and can operate over a wide input voltage range with excellent line and load regulation. Key features include a 1A output current, 52kHz fixed switching frequency, thermal shutdown and current limiting protection.
The LM555 is an integrated circuit used for generating accurate time delays or oscillations. It can be used in monostable or astable configuration. In monostable mode, the time delay is controlled by one resistor and capacitor. In astable mode, the frequency and duty cycle are controlled by two resistors and one capacitor. The circuit can be triggered and reset. The output can source or sink up to 200mA. It has applications in precision timing, pulse generation, and sequential timing.
The document provides information about the LM386 low voltage audio power amplifier. Key details include:
- The LM386 is designed for low voltage battery powered applications from 4V to 12V (or 5V to 18V).
- It has a fixed gain of 20 that can be increased to a range of 20 to 200 using an external resistor and capacitor.
- Quiescent current drain is only 4mA, making it suitable for battery operation.
- Distortion is low at 0.2% for a 6V supply driving an 8 ohm load at 125mW output.
- It is available in small outline packages well-suited for portable applications.
The LM555 is a highly stable integrated circuit used for generating precise time delays or oscillation. It can operate in both monostable (one-shot) and astable (oscillator) modes using only external resistors and capacitors. In monostable mode, the output is triggered on for a precise time determined by a single resistor and capacitor. In astable mode, the output oscillates at a frequency and duty cycle set by two resistors and one capacitor. The LM555 has applications in precision timing, pulse generation, and frequency modulation.
The LM137/LM337 are adjustable 3-terminal negative voltage regulators capable of supplying over -1.5A with an output voltage range of -1.2V to -37V. They require only 2 external resistors to set the output voltage and 1 output capacitor. They feature excellent regulation and protection from overloads and short circuits. Common applications include local voltage regulation, programmable outputs, and precision current regulation.
This document provides information on the MJE13003 NPN silicon transistor from Unisonic Technologies Co., Ltd. It describes the transistor as being designed for high-voltage, high-speed power switching in inductive circuits. Key features include a reverse biased safe operating area with inductive loads up to 1.5 amps and a typical fall time of 290ns at 1 amp and 100°C. The transistor has applications in switching regulators, inverters, motor controls, solenoid drivers, and deflection circuits. Electrical characteristics and maximum ratings are provided in tables and graphs.
uA741 General Purpose Operational AmplifierYong Heui Cho
The μA741 operational amplifier is described, including:
1) It is a general-purpose op-amp featuring offset voltage nulling and high common-mode input voltage range, making it suitable for voltage follower applications.
2) It has short-circuit protection, internal frequency compensation for stability without external components, and low power consumption.
3) It is available in various temperature ranges and packaging options.
This document provides information on Littelfuse's SRV05 Series low capacitance ESD protection device. The 3-sentence summary is:
The SRV05 Series integrates low capacitance diodes and zener diodes to protect I/O pins against ESD and high surge events while also having very low loading capacitance, making them ideal for protecting high speed signals. The SRV05 can withstand ESD events of up to ±20kV contact and ±30kV air, absorb surge currents of up to 10A, and has a low capacitance of 2pF and leakage current of 0.5uA. Application examples show how the SRV05 can provide protection for USB ports
This document describes the DAC0800/DAC0802 8-bit digital-to-analog converters. These converters feature fast 100ns settling times, low nonlinearity of ±0.1%, and high output compliance between -10V to +18V. They can interface directly with various logic families and have a wide power supply range of ±4.5V to ±18V.
Original Transition-Mode PFC Controller IC LD7591GS 7591 SOP-8 New LeadtrendAUTHELECTRONIC
This document provides information about the LD7591 transition-mode PFC controller, including:
- It is a voltage mode PFC controller that operates in transition mode with protections like OVP, OCP, and brown-in protection.
- It has features like low startup current, over voltage protection, open feedback protection, disable function, and integrated current sensing.
- Typical applications include adapters over 65W, open frame switching power supplies, LCD TV power supplies, and LED power supplies.
These comparators are designed for use in level detection, low-level sensing and memory applications. They can operate from a single or split power supply and have low input bias current, offset current and offset voltage. They are compatible with TTL and CMOS logic and have ESD protection diodes on the inputs to increase reliability.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Call8328958814 satta matka Kalyan result satta guessing➑➌➋➑➒➎➑➑➊➍
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
2. LM741
Absolute Maximum Ratings (Note 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 7)
LM741A LM741 LM741C
Supply Voltage ± 22V ± 22V ± 18V
Power Dissipation (Note 3) 500 mW 500 mW 500 mW
Differential Input Voltage ± 30V ± 30V ± 30V
Input Voltage (Note 4) ± 15V ± 15V ± 15V
Output Short Circuit Duration Continuous Continuous Continuous
Operating Temperature Range −55˚C to +125˚C −55˚C to +125˚C 0˚C to +70˚C
Storage Temperature Range −65˚C to +150˚C −65˚C to +150˚C −65˚C to +150˚C
Junction Temperature 150˚C 150˚C 100˚C
Soldering Information
N-Package (10 seconds) 260˚C 260˚C 260˚C
J- or H-Package (10 seconds) 300˚C 300˚C 300˚C
M-Package
Vapor Phase (60 seconds) 215˚C 215˚C 215˚C
Infrared (15 seconds) 215˚C 215˚C 215˚C
See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of
soldering
surface mount devices.
ESD Tolerance (Note 8) 400V 400V 400V
Electrical Characteristics (Note 5)
Parameter Conditions LM741A LM741 LM741C Units
Min Typ Max Min Typ Max Min Typ Max
Input Offset Voltage TA = 25˚C
RS ≤ 10 kΩ 1.0 5.0 2.0 6.0 mV
RS ≤ 50Ω 0.8 3.0 mV
TAMIN ≤ TA ≤ TAMAX
RS ≤ 50Ω 4.0 mV
RS ≤ 10 kΩ 6.0 7.5 mV
Average Input Offset 15 µV/˚C
Voltage Drift
Input Offset Voltage TA = 25˚C, VS = ± 20V ± 10 ± 15 ± 15 mV
Adjustment Range
Input Offset Current TA = 25˚C 3.0 30 20 200 20 200 nA
TAMIN ≤ TA ≤ TAMAX 70 85 500 300 nA
Average Input Offset 0.5 nA/˚C
Current Drift
Input Bias Current TA = 25˚C 30 80 80 500 80 500 nA
TAMIN ≤ TA ≤ TAMAX 0.210 1.5 0.8 µA
Input Resistance TA = 25˚C, VS = ± 20V 1.0 6.0 0.3 2.0 0.3 2.0 MΩ
TAMIN ≤ TA ≤ TAMAX, 0.5 MΩ
VS = ± 20V
Input Voltage Range TA = 25˚C ± 12 ± 13 V
TAMIN ≤ TA ≤ TAMAX ± 12 ± 13 V
www.national.com 2
3. LM741
Electrical Characteristics (Note 5) (Continued)
Parameter Conditions LM741A LM741 LM741C Units
Min Typ Max Min Typ Max Min Typ Max
Large Signal Voltage Gain TA = 25˚C, RL ≥ 2 kΩ
VS = ± 20V, VO = ± 15V 50 V/mV
VS = ± 15V, VO = ± 10V 50 200 20 200 V/mV
TAMIN ≤ TA ≤ TAMAX,
RL ≥ 2 kΩ,
VS = ± 20V, VO = ± 15V 32 V/mV
VS = ± 15V, VO = ± 10V 25 15 V/mV
VS = ± 5V, VO = ± 2V 10 V/mV
Output Voltage Swing VS = ± 20V
RL ≥ 10 kΩ ± 16 V
RL ≥ 2 kΩ ± 15 V
VS = ± 15V
RL ≥ 10 kΩ ± 12 ± 14 ± 12 ± 14 V
RL ≥ 2 kΩ ± 10 ± 13 ± 10 ± 13 V
Output Short Circuit TA = 25˚C 10 25 35 25 25 mA
Current TAMIN ≤ TA ≤ TAMAX 10 40 mA
Common-Mode TAMIN ≤ TA ≤ TAMAX
Rejection Ratio RS ≤ 10 kΩ, VCM = ± 12V 70 90 70 90 dB
RS ≤ 50Ω, VCM = ± 12V 80 95 dB
Supply Voltage Rejection TAMIN ≤ TA ≤ TAMAX,
Ratio VS = ± 20V to VS = ± 5V
RS ≤ 50Ω 86 96 dB
RS ≤ 10 kΩ 77 96 77 96 dB
Transient Response TA = 25˚C, Unity Gain
Rise Time 0.25 0.8 0.3 0.3 µs
Overshoot 6.0 20 5 5 %
Bandwidth (Note 6) TA = 25˚C 0.437 1.5 MHz
Slew Rate TA = 25˚C, Unity Gain 0.3 0.7 0.5 0.5 V/µs
Supply Current TA = 25˚C 1.7 2.8 1.7 2.8 mA
Power Consumption TA = 25˚C
VS = ± 20V 80 150 mW
VS = ± 15V 50 85 50 85 mW
LM741A VS = ± 20V
TA = TAMIN 165 mW
TA = TAMAX 135 mW
LM741 VS = ± 15V
TA = TAMIN 60 100 mW
TA = TAMAX 45 75 mW
Note 2: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits.
3 www.national.com
4. LM741
Electrical Characteristics (Note 5) (Continued)
Note 3: For operation at elevated temperatures, these devices must be derated based on thermal resistance, and Tj max. (listed under “Absolute Maximum
Ratings”). Tj = TA + (θjA PD).
Thermal Resistance Cerdip (J) DIP (N) HO8 (H) SO-8 (M)
θjA (Junction to Ambient) 100˚C/W 100˚C/W 170˚C/W 195˚C/W
θjC (Junction to Case) N/A N/A 25˚C/W N/A
Note 4: For supply voltages less than ± 15V, the absolute maximum input voltage is equal to the supply voltage.
Note 5: Unless otherwise specified, these specifications apply for VS = ± 15V, −55˚C ≤ TA ≤ +125˚C (LM741/LM741A). For the LM741C/LM741E, these
specifications are limited to 0˚C ≤ TA ≤ +70˚C.
Note 6: Calculated value from: BW (MHz) = 0.35/Rise Time(µs).
Note 7: For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
Note 8: Human body model, 1.5 kΩ in series with 100 pF.
Schematic Diagram
00934101
www.national.com 4
5. LM741
Physical Dimensions inches (millimeters)
unless otherwise noted
Metal Can Package (H)
Order Number LM741H, LM741H/883, LM741AH/883, LM741AH-MIL or LM741CH
NS Package Number H08C
5 www.national.com
6. LM741
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Ceramic Dual-In-Line Package (J)
Order Number LM741J/883
NS Package Number J08A
Dual-In-Line Package (N)
Order Number LM741CN
NS Package Number N08E
www.national.com 6
7. LM741 Operational Amplifier
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
10-Lead Ceramic Flatpak (W)
Order Number LM741W/883, LM741WG-MPR or LM741WG/883
NS Package Number W10A
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body, or device or system whose failure to perform can be reasonably
(b) support or sustain life, and whose failure to perform when expected to cause the failure of the life support device or
properly used in accordance with instructions for use system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship
Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned
Substances’’ as defined in CSP-9-111S2.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Americas Customer Europe Customer Support Center Asia Pacific Customer Japan Customer Support Center
Support Center Fax: +49 (0) 180-530 85 86 Support Center Fax: 81-3-5639-7507
Email: new.feedback@nsc.com Email: europe.support@nsc.com Email: ap.support@nsc.com Email: jpn.feedback@nsc.com
Tel: 1-800-272-9959 Deutsch Tel: +49 (0) 69 9508 6208 Tel: 81-3-5639-7560
English Tel: +44 (0) 870 24 0 2171
www.national.com Français Tel: +33 (0) 1 41 91 8790