The document discusses laser scan to Building Information Modeling (BIM) services, highlighting their application in creating accurate 3D models for facility management, renovations, and construction projects. It details the processes involved in converting scanned data into intelligent BIM models and emphasizes the importance of following regional codes during this conversion. Additionally, it provides contact information for the BIM service provider.

1. Created By:

2. Introduction
 A laser scanner is used in a Scan to BIM cycle to
obtain an accurate 3D image of the conditions in
the real world on a project. The scan data is the
n imported into a 3D modeling environment to eit
her build realistic as
built models or to update the design with the con
ditions in the real world.
 Building Information Modeling (BIM )is the
fastest-growing BIM service provider that
focuses on Laser scan to BIM services.
 BIM engineers analysis the millions of data
points to prepare intelligent data-rich 3D BIM
Models

3. Introduction
 Scan to BIM Services is used for facility management,
renovation, repair, building expansion and demolition
purpose. We are capable of converting large scanned
data into an information-rich BIM model.
 BIM services are detailed, reliable and consistent. We
prepare BIM models for architectural, structural and
MEP requirements from the point cloud data. Along
with As Build BIM Model, we also generate the bill of
material, RFIs and renovation documents for the
smooth and fast renovation. We follow regional codes
and standards while preparing BIM models.

4. Scan To BIM Services
 Laser Scan to BIM
 Point Cloud to BIM Solutions
 Point cloud to BIM Conversion
 Surface Reconstruction
 Scan to BIM Conversion
 Laser Scan to BIM Conversion
 Scan to BIM Modeling

5. Important of Laser Scan to BIM
 Scan to BIM helps to build as-
built BIM models for redesign, redesign and r
etrofit projects. It improves the development
of intelligent BIM model in Revit by providi
ng the clients with accurate point cloud data.
Point Cloud geometry models are created b
y Scan to BIM Services to evaluate the differ
ence between model geometry and point clo
ud

6. Scan To BIM Procedure
 A laser scanner is used in a Scan to BIM
cycle to obtain
 an accurate 3D image of the conditions i
n the real world on a project.
 The scan data is then imported into a 3D
modeling environment to either build
 realistic as-
built models or to update the design with
the conditions in the real world

7. Thanks You
 Contact us:
 Name: Building Information Modeling
 URL: http://www.buildinginformationmodelling.net/
 Email id:
info@buildinginformationmodelling.net
 Contact no:
USA : + 1 - 763 - 270 - 8285
UK : + 44 - 208 - 819 - 5832
Aus : + 61 - 871- 303 - 063
India : + 91 - 79 - 40031887