The document is a scanned receipt from a grocery store purchase on June 15th, 2022 totaling $58.37. It lists items bought including ground beef, chicken breasts, tortillas, cheese, and produce such as tomatoes, lettuce, and onions. The receipt shows the item prices, taxes, and total amount due.
A seminar by Dr. Bilal Siddiqui for lecturers and lab engineers at DHA Suffa University to market the graduate program to them. Why get another degree from the university you work at?
ME 313 Mechanical Measurements and Instrumentation is a followup course on ME-312 Machine Design. Design and implementation of measurement systems, signal conditioning and formatting. Dr. Bilal Siddiqui teaches this course every spring at DHA Suffa University.
Avionics 738 Adaptive Filtering at Air University PAC Campus by Dr. Bilal A. Siddiqui in Spring 2018. This lecture deals with introduction to Kalman Filtering. Based n Optimal State Estimation by Dan Simon.
Avionics 738 Adaptive Filtering at Air University PAC Campus by Dr. Bilal A. Siddiqui in Spring 2018. This lecture covers background material for the course.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about basic rules of sketching root locus.
A seminar by Dr. Bilal Siddiqui for lecturers and lab engineers at DHA Suffa University to market the graduate program to them. Why get another degree from the university you work at?
ME 313 Mechanical Measurements and Instrumentation is a followup course on ME-312 Machine Design. Design and implementation of measurement systems, signal conditioning and formatting. Dr. Bilal Siddiqui teaches this course every spring at DHA Suffa University.
Avionics 738 Adaptive Filtering at Air University PAC Campus by Dr. Bilal A. Siddiqui in Spring 2018. This lecture deals with introduction to Kalman Filtering. Based n Optimal State Estimation by Dan Simon.
Avionics 738 Adaptive Filtering at Air University PAC Campus by Dr. Bilal A. Siddiqui in Spring 2018. This lecture covers background material for the course.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about basic rules of sketching root locus.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about time response of systems derived by inspection of poles and zeros. Stability concepts and steady state errors are taught.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about time response of systems derived by inspection of poles and zeros. First and second order systems are considered, along with higher order and nonminimum phase systems
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about block diagram reduction for finding closed loop transfer functions.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about modeling electrical and mechanical systems (transnational and rotational) in frequency domain.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about frequency domain solutions of differential equations and transfer functions.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is introduction to the field.
This is an extended version of a talk given originally at the 2nd International Conference on Entrepreneurial Engineering: Commercialization of Research and Projects at IOBM, Karachi. Later an extended talk was given on several campuses in the city.
Dr. Bilal Siddiqui of DHA Suffa University conducted a two day workshop on softwares used extensively in aerospace industry. The first session was organized by ASME's student chapter at DSU on Friday, the 2nd of December, 2016, which covered USAF Stability and Control DATCOM software used for aerodynamic prediction and aircraft design. Students and faculty from DSU as well as those from Pakistan Airforce Karachi Institute of Economics and Technology (PAF KIET) attended the session. The second session was held on Tuesday, 6th of December at PAF KIET's Korangi Creek campus and focused on interfacing DATCOM with Matlab and Simulink softwares for aircraft simulator design. Students were given hands on training on the softwares. It is worth noting that Dr. Bilal also delivered a lecture titled "It isn't exactly Rocket Science: The artsy science of rocket propulsion" at PAF KIET on the 6th October, as part of an effort to popularize rocket science among academia and changing the scientific culture in Pakistan.
ME 312 Mechanical Machine Design is the flagship course of the mechanical engineering department at DHA Suffa University. This lecture is about mechanical fasteners and non-permanent joints. The course is offered every fall by Dr. Bilal A. Siddiqui.
ME 312 Mechanical Machine Design is the flagship course of the mechanical engineering department at DHA Suffa University. This is an introductory lecture. The course is offered every fall by Dr. Bilal A. Siddiqui.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineeing undergraduates at DHA Suffa University. This lecture set is an introduction to aircraft design using Raymer's methods.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineering undergraduates at DHA Suffa University. This lecture set is about prediction of lift on thin cambered airfoils.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineeing undergraduates at DHA Suffa University. This lecture set deals with thin airfoil theory.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineeing undergraduates at DHA Suffa University. This lecture set is an introduction to vortex lattice method (VLM) through the Kutta condition and circulation.
ME 438 is a course taught by Dr. Bilal Siddiqui at DHA Suffa University. This set of lectures deals with review of vector calculus, fluid mechanics, circulation, source/sink method, introduction to computational aerodynamics with source panel method and calculation of lift.
ME 438 Aerodynamics is a course taught by Dr. Bilal Siddiqui at DHA Suffa University. This set of lectures start from the basic and all the way to aerodynamic coefficients and center of pressure variations with angle of attack.
ME 312 Mechanical Machine Design is the flagship course of Mechanical Engineering Department at DHA Suffa University. This course is offered every semester by Dr. Bilal Siddiqui every fall. It is pre-requisite for capstone projects.
More Related Content
More from Dr. Bilal Siddiqui, C.Eng., MIMechE, FRAeS
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about time response of systems derived by inspection of poles and zeros. Stability concepts and steady state errors are taught.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about time response of systems derived by inspection of poles and zeros. First and second order systems are considered, along with higher order and nonminimum phase systems
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about block diagram reduction for finding closed loop transfer functions.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about modeling electrical and mechanical systems (transnational and rotational) in frequency domain.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is about frequency domain solutions of differential equations and transfer functions.
ME-314 Introduction to Control Engineering is a course taught to Mechanical Engineering senior undergrads. The course is taught by Dr. Bilal Siddiqui at DHA Suffa University. This lecture is introduction to the field.
This is an extended version of a talk given originally at the 2nd International Conference on Entrepreneurial Engineering: Commercialization of Research and Projects at IOBM, Karachi. Later an extended talk was given on several campuses in the city.
Dr. Bilal Siddiqui of DHA Suffa University conducted a two day workshop on softwares used extensively in aerospace industry. The first session was organized by ASME's student chapter at DSU on Friday, the 2nd of December, 2016, which covered USAF Stability and Control DATCOM software used for aerodynamic prediction and aircraft design. Students and faculty from DSU as well as those from Pakistan Airforce Karachi Institute of Economics and Technology (PAF KIET) attended the session. The second session was held on Tuesday, 6th of December at PAF KIET's Korangi Creek campus and focused on interfacing DATCOM with Matlab and Simulink softwares for aircraft simulator design. Students were given hands on training on the softwares. It is worth noting that Dr. Bilal also delivered a lecture titled "It isn't exactly Rocket Science: The artsy science of rocket propulsion" at PAF KIET on the 6th October, as part of an effort to popularize rocket science among academia and changing the scientific culture in Pakistan.
ME 312 Mechanical Machine Design is the flagship course of the mechanical engineering department at DHA Suffa University. This lecture is about mechanical fasteners and non-permanent joints. The course is offered every fall by Dr. Bilal A. Siddiqui.
ME 312 Mechanical Machine Design is the flagship course of the mechanical engineering department at DHA Suffa University. This is an introductory lecture. The course is offered every fall by Dr. Bilal A. Siddiqui.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineeing undergraduates at DHA Suffa University. This lecture set is an introduction to aircraft design using Raymer's methods.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineering undergraduates at DHA Suffa University. This lecture set is about prediction of lift on thin cambered airfoils.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineeing undergraduates at DHA Suffa University. This lecture set deals with thin airfoil theory.
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui to senior mechanical engineeing undergraduates at DHA Suffa University. This lecture set is an introduction to vortex lattice method (VLM) through the Kutta condition and circulation.
ME 438 is a course taught by Dr. Bilal Siddiqui at DHA Suffa University. This set of lectures deals with review of vector calculus, fluid mechanics, circulation, source/sink method, introduction to computational aerodynamics with source panel method and calculation of lift.
ME 438 Aerodynamics is a course taught by Dr. Bilal Siddiqui at DHA Suffa University. This set of lectures start from the basic and all the way to aerodynamic coefficients and center of pressure variations with angle of attack.
ME 312 Mechanical Machine Design is the flagship course of Mechanical Engineering Department at DHA Suffa University. This course is offered every semester by Dr. Bilal Siddiqui every fall. It is pre-requisite for capstone projects.
More from Dr. Bilal Siddiqui, C.Eng., MIMechE, FRAeS (20)
