This document discusses the characteristics of professionals and professionalism. It outlines five key characteristics of professionals: 1) they deal with vast and complex bodies of knowledge, 2) they continue creating new knowledge in their field, 3) they deal with high-stake activities that can significantly impact clients, 4) they work based on trust with clients since the quality of their work is difficult for clients to evaluate, and 5) they are self-regulating. The document provides examples for each characteristic and explains how professionals like teachers, doctors, lawyers, and engineers exhibit these traits through their work. It emphasizes that possessing all five of these characteristics is what distinguishes a profession from other occupations.
Vocational Disciplines - What could a general framework look like?Ghazally Spahat
The International Framework for Master’s degree programmes in Technical and Vocational Education and Training (TVET), which was adopted during the Hangzhou
Conference in November 2004 (Veal, Dittrich, Kämäräinen 2005), proposed a set of twelve vocational disciplines.
A Review of Professional Practices for Computer Sciences Students in Academicssyedhamza71
This document summarizes key aspects of professional practices for computer science students. It discusses the importance of integrating professional practices into computer science curricula to better prepare students for the workplace. Professional practices include developing skills like collaboration, problem solving, communication, and lifelong learning. The document also outlines traits of professionals like seriousness, willingness to learn new skills, and maintaining composure. Integrating work placements and apprenticeships can help students gain real-world experience solving issues in both public and private sectors. Maintaining high ethical standards is also important for computer professionals.
This document provides information about preparing for a vocational role, including the meaning of career, vocation, and occupation. It discusses the need to properly plan and prepare for a vocation through general education and/or specialized training. Choosing a vocation requires understanding one's interests, aptitudes, and personality characteristics. The document outlines the steps to make a good career choice, including self-assessment, researching occupations, narrowing options, setting goals, and creating an action plan. It also notes some common myths about career choice and emphasizes the importance of counseling in making a wise decision.
This document discusses vocational education and training. It defines vocational education as education that prepares people for specific trades or careers through hands-on learning. Various methods of vocational assessment are described, including work samples, job analysis, situational assessment, transferable skills analysis, and vocational skills audits. Performance-based measures of functional skills are discussed as being useful for clinical treatment studies in accurately assessing everyday living skills. Addressing the training needs of workers in Africa's large informal sector is also covered.
This document discusses different methods for assessing vocational skills, including economic, functional, and social abilities. It describes several approaches: work samples directly assess job skills; job analysis profiles essential tasks; situational assessment places individuals in simulated work environments; and community-based assessment observes people in real work situations. Vocational assessment aims to evaluate work history, capacities, and characteristics to set goals and provide appropriate rehabilitation interventions.
Unit 13 health and social care sector specification butcher665
This document provides information on Unit 13: The Health and Social Care Sector. The unit introduces learners to careers in the health and social care sector and requires them to complete a minimum 25-hour work placement. Learners will develop an understanding of the skills and professional standards required for these careers, investigate different service provisions and job roles, and reflect on their performance during their placement. The unit content outlines topics learners need to understand, such as required skills, types of provision, job roles, and how to reflect on their placement experience. Assessment criteria specify the evidence and level of understanding needed to pass the unit.
Vocational Disciplines - What could a general framework look like?Ghazally Spahat
The International Framework for Master’s degree programmes in Technical and Vocational Education and Training (TVET), which was adopted during the Hangzhou
Conference in November 2004 (Veal, Dittrich, Kämäräinen 2005), proposed a set of twelve vocational disciplines.
A Review of Professional Practices for Computer Sciences Students in Academicssyedhamza71
This document summarizes key aspects of professional practices for computer science students. It discusses the importance of integrating professional practices into computer science curricula to better prepare students for the workplace. Professional practices include developing skills like collaboration, problem solving, communication, and lifelong learning. The document also outlines traits of professionals like seriousness, willingness to learn new skills, and maintaining composure. Integrating work placements and apprenticeships can help students gain real-world experience solving issues in both public and private sectors. Maintaining high ethical standards is also important for computer professionals.
This document provides information about preparing for a vocational role, including the meaning of career, vocation, and occupation. It discusses the need to properly plan and prepare for a vocation through general education and/or specialized training. Choosing a vocation requires understanding one's interests, aptitudes, and personality characteristics. The document outlines the steps to make a good career choice, including self-assessment, researching occupations, narrowing options, setting goals, and creating an action plan. It also notes some common myths about career choice and emphasizes the importance of counseling in making a wise decision.
This document discusses vocational education and training. It defines vocational education as education that prepares people for specific trades or careers through hands-on learning. Various methods of vocational assessment are described, including work samples, job analysis, situational assessment, transferable skills analysis, and vocational skills audits. Performance-based measures of functional skills are discussed as being useful for clinical treatment studies in accurately assessing everyday living skills. Addressing the training needs of workers in Africa's large informal sector is also covered.
This document discusses different methods for assessing vocational skills, including economic, functional, and social abilities. It describes several approaches: work samples directly assess job skills; job analysis profiles essential tasks; situational assessment places individuals in simulated work environments; and community-based assessment observes people in real work situations. Vocational assessment aims to evaluate work history, capacities, and characteristics to set goals and provide appropriate rehabilitation interventions.
Unit 13 health and social care sector specification butcher665
This document provides information on Unit 13: The Health and Social Care Sector. The unit introduces learners to careers in the health and social care sector and requires them to complete a minimum 25-hour work placement. Learners will develop an understanding of the skills and professional standards required for these careers, investigate different service provisions and job roles, and reflect on their performance during their placement. The unit content outlines topics learners need to understand, such as required skills, types of provision, job roles, and how to reflect on their placement experience. Assessment criteria specify the evidence and level of understanding needed to pass the unit.
This document outlines the programme outcomes (POs), programme specific outcomes (PSOs), and course outcomes (COs) for the B.Com Commerce program at KSN Government Degree College for Women in Ananthapuram, India. The 6 POs cover developing critical thinking, effective citizenship, effective communication, interdisciplinarity, self-directed lifelong learning, and ethics. The 6 PSOs relate to understanding commerce concepts/applications, entrepreneurship skills, business competency, decision making, impact of other disciplines on business, and using IT in office activities. Numerous COs are then listed for individual courses, mapping them to the relevant POs and PSOs. The courses cover topics such as accounting, economics
The document provides guidelines for a Work Immersion orientation for parents of senior high school students. It explains that Work Immersion is a graduation requirement where students undergo training in an industry related to their field of study. It helps students gain practical skills, appreciate classroom theories, and develop good work habits to prepare them for future employment or education. The document outlines the activities students will participate in before, during, and after their Work Immersion placement. It also provides examples of partner institutions and offices where students can complete their Work Immersion.
Employability, The Labor Force and the Economynpologeorgis
Employability refers to an individual's ability to obtain and maintain employment. It depends on characteristics like skills, education, experience, and adaptability. High employability benefits both individuals and the overall economy. For individuals, it provides career opportunities and financial stability. For the economy, it leads to lower unemployment and higher productivity and economic growth. Maintaining employability requires continuous skills development, as labor market needs change rapidly. Workers need both technical skills specific to their occupation as well as soft skills like communication, problem solving, and cultural competence that facilitate employment across different roles and industries. Educational institutions, employers, workers, and policies all play a role in developing and sustaining employability.
The document provides background information on Laguna State Polytechnic University (LSPU). It details how LSPU started as a provincial high school in 1952 and over time expanded to offer more programs and integrate other schools, becoming a state polytechnic university. The summary highlights LSPU's vision to be a center of innovation and its mission to provide technology-focused education. It also notes that LSPU has grown significantly over the decades to now include multiple campuses across Laguna province.
This document outlines a teaching guide for a Home Economics curriculum on health care and support services. It includes 4 quarters of topics to be covered related to adolescent and young adult care. The first quarter focuses on personal entrepreneurial competencies, the environment and market, and basic concepts and principles of young adolescent care. Learners will assess their own PECs, formulate business ideas based on market analysis, and demonstrate their understanding of adolescent care practices.
1. The document provides information about vocational guidance in Turkey, including the history and legal framework, major activities and providers, and examples of good practices.
2. It outlines the stages of vocational guidance from self-knowledge to recognition of professions to determining characteristics and expectations.
3. The document discusses options for post-primary education in Turkey and factors to consider when choosing a high school, as this choice can impact university entrance exam scores.
The document discusses the tools, equipment, supplies, and materials needed for a paraffin wax hand spa treatment, including a hand spa machine, towels, small basin, plastic cling wrap, mittens, scrubbing glove, hand lotion, paraffin wax, liquid hand soap, salt scrub, and alcohol. It provides pictures and descriptions of each item and explains how to properly use a paraffin wax machine. The document emphasizes the importance of identifying and knowing how to use the correct tools and supplies to perform a safe and effective paraffin wax spa treatment.
This document provides an evidence base on Science, Technology, Engineering and Mathematics (STEM) in Scotland. It defines STEM broadly based on various data sets and discusses the demand for and drivers of STEM skills. Regarding demand, it notes that in 2016 there were 963,400 people employed in STEM industries in Scotland, a larger share than the UK average. The supply of STEM education is also examined, covering school, college, apprenticeship and university provision. The document concludes with recommendations to address issues and evidence gaps to better support the new Scottish STEM Strategy.
A Review On Career Guidance And Counselling Needs For StudentsKarla Adamson
This document summarizes techniques for career guidance and counseling of students. It discusses several key factors to consider: interests and strengths of students, academic ability and aptitude, personality, developing relationships, allowing self-exploration, relating life themes to career goals. The document also reviews literature on career selection processes in India and scopes for developing career guidance systems. Overall, it stresses the importance of comprehensive and individualized career counseling that helps students understand their interests and abilities and relate them to potential career paths.
Bioscience Presentation For Business Services StaffThomasSuggs
Presentation givento Jefferson County Workforce Center on needs of area bioscience companies and recommendations for how the WFC can better meet those needs.
Edukasyong Pantahanan at Pangkabuhayan Module Week 1 to 2JemahBrotamante
This module introduces Edukasyong Pantahanan at Pangkabuhayan (EPP) in the Philippine educational context for pre-service teachers. It discusses the importance of EPP in developing students' skills and knowledge in areas like industrial arts, home economics, agriculture, and ICT. The module is divided into units that explore the components of EPP in the K-12 curriculum and how to effectively teach and assess EPP topics at the elementary level using project-based and experiential learning approaches. It provides lessons, activities, and rubrics to help students learn key concepts and apply their understanding through video projects demonstrating EPP skills and techniques.
This document provides an overview of engineering ethics and professionalism. It discusses what constitutes a profession, analyzing it from sociological, philosophical, and definitional perspectives. Engineering meets some but not all criteria of a full profession. The document also distinguishes between common morality, personal morality, and professional ethics. In engineering ethics, there is both preventive or "negative" ethics focused on avoiding harm, as seen in codes of ethics, as well as aspirational or "positive" ethics aiming for good works. Examples of both ethical lapses and good engineering projects are provided.
Summarized notes for use with Computer Hardware Servicing NC 2. Please note that this is a compilation of the many works of the different authors including mine. Copyright remains to the original owner of the included document. This is not a complete guide, but I am hoping this will be able to help CHS Instructors/Trainers.
This document outlines the requirements and process for Work Immersion, a course requirement for graduation from the K to 12 program in the Philippines. Work Immersion involves students undergoing industry exposure related to their field of specialization to enhance their competencies. It discusses the minimum requirements, including 80 hours, and preparation steps like orientations, resume and cover letter workshops, and identifying home-based immersion schedules and tasks. The process involves pre-immersion, during immersion where students complete reports and reflections, and post-immersion evaluation through a portfolio presentation, updated resume, and mock job interview. The goal is for students to gain practical skills from experts to appreciate classroom theories and enrich communications skills for future employment or education.
PowerPoint Presentation on Work Immersion.pptxcarlo842542
This document outlines the requirements and procedures for the Work Immersion program, which is a graduation requirement for Senior High School students in the Philippines. The Work Immersion program exposes students to real work environments related to their field of study in order to enhance their skills and prepare them for employment or higher education. It requires a minimum of 80 hours spent in an industry placement. The process involves three phases - pre-immersion orientation and preparation, the immersion period where students complete tasks and reports, and a post-immersion evaluation presentation and job interview. The goal is for students to gain practical skills while appreciating classroom theories and developing good work habits for their future careers.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
This document outlines the programme outcomes (POs), programme specific outcomes (PSOs), and course outcomes (COs) for the B.Com Commerce program at KSN Government Degree College for Women in Ananthapuram, India. The 6 POs cover developing critical thinking, effective citizenship, effective communication, interdisciplinarity, self-directed lifelong learning, and ethics. The 6 PSOs relate to understanding commerce concepts/applications, entrepreneurship skills, business competency, decision making, impact of other disciplines on business, and using IT in office activities. Numerous COs are then listed for individual courses, mapping them to the relevant POs and PSOs. The courses cover topics such as accounting, economics
The document provides guidelines for a Work Immersion orientation for parents of senior high school students. It explains that Work Immersion is a graduation requirement where students undergo training in an industry related to their field of study. It helps students gain practical skills, appreciate classroom theories, and develop good work habits to prepare them for future employment or education. The document outlines the activities students will participate in before, during, and after their Work Immersion placement. It also provides examples of partner institutions and offices where students can complete their Work Immersion.
Employability, The Labor Force and the Economynpologeorgis
Employability refers to an individual's ability to obtain and maintain employment. It depends on characteristics like skills, education, experience, and adaptability. High employability benefits both individuals and the overall economy. For individuals, it provides career opportunities and financial stability. For the economy, it leads to lower unemployment and higher productivity and economic growth. Maintaining employability requires continuous skills development, as labor market needs change rapidly. Workers need both technical skills specific to their occupation as well as soft skills like communication, problem solving, and cultural competence that facilitate employment across different roles and industries. Educational institutions, employers, workers, and policies all play a role in developing and sustaining employability.
The document provides background information on Laguna State Polytechnic University (LSPU). It details how LSPU started as a provincial high school in 1952 and over time expanded to offer more programs and integrate other schools, becoming a state polytechnic university. The summary highlights LSPU's vision to be a center of innovation and its mission to provide technology-focused education. It also notes that LSPU has grown significantly over the decades to now include multiple campuses across Laguna province.
This document outlines a teaching guide for a Home Economics curriculum on health care and support services. It includes 4 quarters of topics to be covered related to adolescent and young adult care. The first quarter focuses on personal entrepreneurial competencies, the environment and market, and basic concepts and principles of young adolescent care. Learners will assess their own PECs, formulate business ideas based on market analysis, and demonstrate their understanding of adolescent care practices.
1. The document provides information about vocational guidance in Turkey, including the history and legal framework, major activities and providers, and examples of good practices.
2. It outlines the stages of vocational guidance from self-knowledge to recognition of professions to determining characteristics and expectations.
3. The document discusses options for post-primary education in Turkey and factors to consider when choosing a high school, as this choice can impact university entrance exam scores.
The document discusses the tools, equipment, supplies, and materials needed for a paraffin wax hand spa treatment, including a hand spa machine, towels, small basin, plastic cling wrap, mittens, scrubbing glove, hand lotion, paraffin wax, liquid hand soap, salt scrub, and alcohol. It provides pictures and descriptions of each item and explains how to properly use a paraffin wax machine. The document emphasizes the importance of identifying and knowing how to use the correct tools and supplies to perform a safe and effective paraffin wax spa treatment.
This document provides an evidence base on Science, Technology, Engineering and Mathematics (STEM) in Scotland. It defines STEM broadly based on various data sets and discusses the demand for and drivers of STEM skills. Regarding demand, it notes that in 2016 there were 963,400 people employed in STEM industries in Scotland, a larger share than the UK average. The supply of STEM education is also examined, covering school, college, apprenticeship and university provision. The document concludes with recommendations to address issues and evidence gaps to better support the new Scottish STEM Strategy.
A Review On Career Guidance And Counselling Needs For StudentsKarla Adamson
This document summarizes techniques for career guidance and counseling of students. It discusses several key factors to consider: interests and strengths of students, academic ability and aptitude, personality, developing relationships, allowing self-exploration, relating life themes to career goals. The document also reviews literature on career selection processes in India and scopes for developing career guidance systems. Overall, it stresses the importance of comprehensive and individualized career counseling that helps students understand their interests and abilities and relate them to potential career paths.
Bioscience Presentation For Business Services StaffThomasSuggs
Presentation givento Jefferson County Workforce Center on needs of area bioscience companies and recommendations for how the WFC can better meet those needs.
Edukasyong Pantahanan at Pangkabuhayan Module Week 1 to 2JemahBrotamante
This module introduces Edukasyong Pantahanan at Pangkabuhayan (EPP) in the Philippine educational context for pre-service teachers. It discusses the importance of EPP in developing students' skills and knowledge in areas like industrial arts, home economics, agriculture, and ICT. The module is divided into units that explore the components of EPP in the K-12 curriculum and how to effectively teach and assess EPP topics at the elementary level using project-based and experiential learning approaches. It provides lessons, activities, and rubrics to help students learn key concepts and apply their understanding through video projects demonstrating EPP skills and techniques.
This document provides an overview of engineering ethics and professionalism. It discusses what constitutes a profession, analyzing it from sociological, philosophical, and definitional perspectives. Engineering meets some but not all criteria of a full profession. The document also distinguishes between common morality, personal morality, and professional ethics. In engineering ethics, there is both preventive or "negative" ethics focused on avoiding harm, as seen in codes of ethics, as well as aspirational or "positive" ethics aiming for good works. Examples of both ethical lapses and good engineering projects are provided.
Summarized notes for use with Computer Hardware Servicing NC 2. Please note that this is a compilation of the many works of the different authors including mine. Copyright remains to the original owner of the included document. This is not a complete guide, but I am hoping this will be able to help CHS Instructors/Trainers.
This document outlines the requirements and process for Work Immersion, a course requirement for graduation from the K to 12 program in the Philippines. Work Immersion involves students undergoing industry exposure related to their field of specialization to enhance their competencies. It discusses the minimum requirements, including 80 hours, and preparation steps like orientations, resume and cover letter workshops, and identifying home-based immersion schedules and tasks. The process involves pre-immersion, during immersion where students complete reports and reflections, and post-immersion evaluation through a portfolio presentation, updated resume, and mock job interview. The goal is for students to gain practical skills from experts to appreciate classroom theories and enrich communications skills for future employment or education.
PowerPoint Presentation on Work Immersion.pptxcarlo842542
This document outlines the requirements and procedures for the Work Immersion program, which is a graduation requirement for Senior High School students in the Philippines. The Work Immersion program exposes students to real work environments related to their field of study in order to enhance their skills and prepare them for employment or higher education. It requires a minimum of 80 hours spent in an industry placement. The process involves three phases - pre-immersion orientation and preparation, the immersion period where students complete tasks and reports, and a post-immersion evaluation presentation and job interview. The goal is for students to gain practical skills while appreciating classroom theories and developing good work habits for their future careers.
Similar to L1 M2 Professions and Professionalism (1).pdf (18)
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
How to Manage Your Lost Opportunities in Odoo 17 CRMCeline George
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UPRAHUL
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Digital Artefact 1 - Tiny Home Environmental Design
L1 M2 Professions and Professionalism (1).pdf
1. L–1: Professions and Professionalism
Contributors
Dr. Shashi Kant Gupta
Professor of Assessment and Evaluation
Prof. (Mrs.) Susan S. Mathew
Associate Professor, Department of Electrical and Electronics Engineering
Editor: Dr. Joshua Earnest, Professor of Electrical Engineering
National Institute of Technical Teachers’ Training and Research
Shamla Hills, Bhopal M.P. - INDIA 462002
2. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 2
L–1: Professions and Professionalism
Contents
1.0 INTRODUCTION.......................................................................................................................................... 3
2.0 CHARACTERISTICS OF PROFESSIONALS...................................................................................................... 3
3.0 PROFESSIONALS DEAL WITH A VAST BODY OF COMPLEX KNOWLEDGE ................................................... 4
4.0 PROFESSIONALS CONTINUE TO CREATE ‘NEW KNOWLEDGE’ IN THEIR PROFESSION............................... 5
5.0 PROFESSIONALS DEAL WITH HIGH STAKE ACTIVITIES................................................................................ 6
6.0 PROFESSIONALS WORK BASED ON TRUST WITH CLIENTS ......................................................................... 8
7.0 PROFESSIONALS ARE SELF-REGULATING ................................................................................................. 12
8.0 SUMMARY................................................................................................................................................ 14
BIBLIOGRAPHY ...................................................................................................................................................... 15
Learning outcomes: At the end of this lesson, you will be able to:
LO 1. Describe the role of a professional in his/her occupation.
LO 2. Distinguish between profession and professionalism.
LO 3. Justify the need of professionals for creating new knowledge.
LO 4. Describe the concept of self-regulation with reference to a profession.
3. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 3
Lesson –1
Professions and Professionalism
1.0 INTRODUCTION
Teachers of higher education institutions are regarded as professionals in the same way as
doctors, lawyers, chartered accountants, engineers and architects. This brings along with it
special responsibility on the shoulders of faculty members of higher-education institutions.
Therefore, every faculty member need to understand what makes professionals different
compared to other occupations such as administrators or executive officers (IAS, Income Tax
commissioners, Revenue officers, Managers and other government officers) defence
(military, police and such others), traders (businessmen and marketing executives) and crafts
persons (technicians, plumber, carpenters, clerks and such others). The faculty members
should also contemplate what the society expects from them as professionals. In other
words, ‘what are their responsibilities or privileges as professionals’? These issues are
discussed in this lesson.
2.0 CHARACTERISTICS OF PROFESSIONALS
The concept of ‘Professionalism’ is closely related to professions. Professionalism is such an
abstract and complex concept that it is difficult to define it absolutely. For understanding the
concept of ‘professionalism’, it is essential to discuss the characteristics of professionals.
However, if you can identify the necessary and sufficient conditions of professionals or the
characteristics/attributes of professionals, then you can understand professionalism in a
better way. In other words, you can give a normative definition of professionals or
professionalism by listing the essential and sufficient conditions for it. Bayles (1989) defines
the term ‘profession’ as ‘Professions are those form of works, which involves advanced
expertise, self-regulation and concerted service to the public good’. From this definition it is
obvious that:
i. Professionals deal with vast and complex knowledge.
ii. Professionals continue to create new knowledge in their profession
iii. Professionals deal with high stake activities
iv. Professionals work based on trust with clients.
v. Professionals are self-regulating.
Professionals of any class i.e. whether Doctors, Lawyers, Professors, Scientists, Chartered
Accountants, Architects or Engineers are supposed to possess the following five essential
characteristics discussed in the following sections. For any occupation to be declared as a
profession that particular occupation need to possess all of these FIVE characteristics and
absence of even one of these will render that occupation not as a profession.
4. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 4
3.0 PROFESSIONALS DEAL WITH A VAST BODY OF COMPLEX KNOWLEDGE
All occupations require some kind of specialized knowledge for performing the jobs related
to that profession. Even occupations or vocations such as that of a carpenter, welder,
plumber or electrician, the person is required to possess some special knowledge/skills
related to that vocation for performing their duties. But for most of the vocations, training of
one or two years after schooling (up to the secondary, i.e. grade/class tenth) is sufficient.
However, this condition is not so with respect to professional knowledge.
However, first and foremost is that the special knowledge required to be possessed by
professionals of that ‘body of knowledge’ has to be quite vast and complex. The profession
related knowledge is so vast that it requires many years of study at higher levels of thinking
to acquire that level of knowledge. Secondly, this specialized knowledge is so complex that
for its proper use, it must be understood in its totality, which means that understanding of
the relationship between different components of that body of knowledge which is equally
important.
For example, acquiring professional qualifications in the areas of engineering, medicine and
law, five to seven years of academic study is required after successfully taking the secondary
school leaving certificate. This includes two years of higher secondary (i.e. class/grade
eleventh and twelfth) and minimum four years of UG education. For mastery in any of these
professions, two more years of PG education is required. For becoming a leader in the same
profession, a research degree such as Ph.D. or super-specialization is also required. This will
again entail a minimum of three more years of hard work after their PG education. Thus, it
works out to making it a minimum total eleven years of very hard work or ‘tapasya’ after
class 10th or lower secondary education.
Application of professional knowledge also calls for more complex decision making, that too
in a given context (engineering situation, medical/legal case). The context of application of
knowledge in most cases is a social context, directly related with the human beings and
makes each case a unique one. Some examples of complex situations are given below:
a) A student of medicine might have studied treatment for blood pressure, diabetes
and some contagious disease such as typhoid during his/her college days, but in real
life s/he may face patients, who are having all the three ailments simultaneously, the
of case becomes more complex. In some situations, if the patient is an infant baby or
very elderly person or a pregnant lady it becomes still more complex.
ACTIVITY- 1
State two areas of your expertise which fall under the category of 'vast and complex body
of knowledge'. For each of your identified areas, specify the depth of knowledge you
have attained and what more need to be attained in those areas of your profession and
post them in your E-portfolio.
5. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 5
b) Each student is different from one another since different students have different
IQ,EQ, aptitude, attitudes, learning styles, social background, financial background,
interests and aspirations, which reveals that each student is unique. Therefore,
professors need to understand these differences for dealing with students.
4.0 PROFESSIONALS CONTINUE TO CREATE ‘NEW KNOWLEDGE’ IN THEIR PROFESSION
Professional knowledge is continuously growing in most professions due to the continual
researches. New innovations/inventions and discoveries are happening continuously.
Innovations in procedures, techniques and materials used are very common. These
discoveries and innovations are being made by the professionals to meet the changing needs
of the society and to take the advantage of scientific discoveries made in other bodies of
knowledge. Therefore, the professionals are to engage in small and big researches to create
new knowledge. Further, professionals are also supposed to learn the new knowledge
developed by other fellow professionals. This makes it necessary for professionals to keep
updating their knowledge till they are active in their profession. Professionals are therefore
required to read the journals related to their field of specialization in order to keep
themselves abreast. They are supposed to attend different conferences and training
programmes to learn new developments taking place all over world in their field of work. In
some countries such as UK, the professionals especially the doctors are required to obtain
re-certification periodically, say, after every 10 or 15 years to prove that they have learned
new techniques/new procedures. Some examples of the need for updating knowledge is
given here:
a) In the field of medicine, many doctors are doing researches to develop new
diagnostic methods, new medicines, use of new procedures for surgeries and such
others. Other doctors are supposed to learn from these developments for improving
their medical practice and better treatment of patients.
b) Parliament and legislative assemblies pass new laws, regulations and acts every year
depending upon the changing needs of the society. Lawyers are supposed to learn
not only about these laws, but also to debate and criticize these laws which are
passed and not in line with natural justice and create an opinion against such laws.
Thus, lawyers must keep on studying and learning throughout their professional life.
c) In this age of technological advancements, new materials and technologies are being
developed in different disciplines of engineering, which all practicing engineers are
not only supposed to learn and keep abreast, but also are have to contribute in such
developments by engaging in research at their end.
d) For teachers in higher education and scientists, it is their regular duty to engage in
research and guide researches conducted by their students.
Thus, for all professionals it is essential to contribute in creating new knowledge, as well as,
learn new knowledge developed by other fellow professionals.
6. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 6
5.0 PROFESSIONALS DEAL WITH HIGH STAKE ACTIVITIES
Some decisions and activities involve high stakes of users, while some are not so important.
When somebody purchases a television or refrigerator, s/he pays for it and wants the best
product. But, if the purchased product does not perform as guaranteed by the trader, then
the peace of the customer is lost due to the lack of desired satisfaction for the money paid.
In most cases, the consumers do not attach much value to the loss as certain time lapses.
However, in case of education, health and legal issues, if results are not as expected due to
some complacency or mistake of professionals who gave them service, then such deficiency
in outcomes may lead to lifelong or long-term loss or sufferings to the clients and society.
Some examples given below can provide greater clarification:
a) It is reported that some students lose interest in some key courses or become fearful
even about an easy courses, because a particular teacher do not taught that subject
in a proper way. Such a lack of interest in a key subject may force the students to
choose some other career option, where they can avoid that subject. Therefore, the
insincerity of such teachers may affect the career choices of many students.
b) Mistakes, incompetence or complacency of a doctor or a surgeon may render the
person disabled for life, or in some extreme cases may lead to death.
c) The incompetence or mistakes of a lawyer, the petitioners may get deprived of their
jobs or their property rights or may even end up in jails for no crime committed by
them.
Thus, the activities of the teachers, doctors and lawyers can brighten or tarnish any persons’
life/lifetime chances. The decisions or activities of engineers may also affect the individuals
directly. However, but their collective actions can affect the lives of many to a great extent.
Engineers build infrastructure such as roads, dams, bridges, telecommunication system,
power generation and distribution system, surface/water/air transportation system, defense
equipment and such others that are used for benefit of common public. If engineers design
these systems well, then they work as a boon for society. On the other hand, if these
systems are not designed or maintained well then, they may result in a great harm to the
society involving considerable number of people. Such examples of accidents of great
engineering failures are:
Indonesian airline Boeing 737 MAX crash tragedy in 2019
Fukushima (Japan) nuclear reactor leakage related tragedy
Chernobyl (Russia) Nuclear reactor leakage related tragedy
Bhopal (India) Gas leakage related tragedy in December 1984
Mine Collapses, Mine Fires, Mine Flooding Related Tragedies in Bihar
ACTIVITY- 2
List down at least two ‘new chunks of knowledge’ that you have created in the past
years and post them in your E-portfolio.
7. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 7
Dam breaches
Titanic ship sinking several decades ago.
Often, the engineering mistakes of large scale may not be so apparent as above-mentioned
examples, but some others do affect millions of lives over a long period of time. For
example, a poorly designed road network increases chances of accidents on roads.
Inappropriate use of technology and materials may lead to more consumption of energy and
other natural resources affecting environment adversely and so on. Thus, engineering and
architectural activities are also high stake as they affect safety of human being, energy and
environment conservation to a large extent.
Similarly, the chartered accountants (CA) are entrusted with the responsibilities of certifying
the accounts of large companies where pension funds and savings of millions of common
people are invested. Whatever CAs certify in their report about the companies’ financial
health, investors believe it blindly, which may affect many people good or bad.
In some cases, such as ENRON Power Company of USA, Satyam Computers of India, IL& FS
companies CAs wrongly reported that these companies are in profit, and millions continued
to deposit their savings in these companies and one day the bubble burst and it came to
public knowledge that these companies were running in loss and investor’s money was being
used to pay interests on borrowings and losses. The companies were not only bankrupt, but
were already under huge debt burdens, which were no more sustainable. Millions of people
lost their lifetime savings and pension funds in these companies and their retired life must
have become miserable. If CAs had acted with true professionalism i.e. honestly and had
reported correct financial position, loss of life time savings of such a huge number of people
might have been averted.
Thus, the actions of some Professors, Doctors, Lawyers, Engineers and Charted Accountants
are high-stake as their actions have the potential to affect millions of lives people positively
or negatively. Whereas, the actions of the people in other occupations such as plumbers,
carpenters, welders or shopkeepers are not of high-stake. Therefore, the mistakes
committed by people such in such occupations may affect only a few, and not large number
as seen earlier. Moreover, activities of these people are supervised by other type of
professionals such as activities of plumber, carpenter, welder and such trades are supervised
by Engineers, while activities of restaurants are supervised by foods and drug department to
ensure the quality of the food and edibles.
ACTIVITY - 3
List down at least two mistakes that you as a professional teacher have committed during
the past years that may have affected your students or the society and post in your E-
portfolio.
8. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 8
6.0 PROFESSIONALS WORK BASED ON TRUST WITH CLIENTS
In most of the occupations, the quality of goods and services provided to the customers may
be well specified in advance. For example, when you purchase a house, a car or a television
set you can fix or choose the specifications of these products in advance and if a product is
not as per specifications or does not perform as guaranteed, then you can return the
product and claim your money back. Similarly, in case of services provided by travel and
hospitality industries also, the quality of services can be well specified in advance and if the
services provided are not as specified, then the customers may ask the service providers to
return their money back. In such cases, people can decide about quality of goods and
services by common sense or general knowledge.
However, in case of education, medicine and legal and such professions, it is very difficult to
define the quality of services provided, as they are complex and specialized fields. The clients
do not possess the sufficient knowledge to appreciate what good quality means. Often, the
effects of such services provided by such professions are seen only after considerable time
has elapsed. Some examples given below in support these arguments.
--------------------------------------------------------------------------------------------------------------------------
Example Set-1
a) In the case of professional education, often the students do not know what content is
supposed to be learnt and what competencies and skills are to be attained through
the course or programme. What are the best methods that a teacher should adopt
for teaching the subject matter is also not known by the student.
b) A particular institute/university may award good marks to undeserving students, and
parents may feel that teaching-learning process is going on well. But after some time,
such students may fail to get jobs. If they are not able to perform well, even after
they have got the jobs, they would be subsequently fired.
c) In some other cases, the examination system of the institute/university may seem to
be trustworthy and due to best efforts of teachers, students may also genuinely get
good marks by doing hard work. It may appear to the society that the quality of
education is quite good, but when students get the job, they are not be able to
perform to the industry expectation, since the curriculum itself was obsolete or
irrelevant.
d) Patients generally do not know ‘what is the right medicine required?’ The doctor may
prescribe very strong medicine to heal the patients quickly and patients may feel
happy. However, it may result in severe side effects which may be evident only after
some years have gone by.
e) Clients of an advocate/lawyer may not know the different provisions of law which
may help them. Similarly, a lawyer may argue the case in the court of law very
strongly, but s/he may not know the different provisions of the law which may help
his/her client. In such cases, the client may feel that his/her advocate is quite good,
although the advocate is only a mediocre one who is not able to extract maximum
possible benefits for the client.
9. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 9
6.1 Responsibility of the Professionals and Clients
Apart from the complexity of educational, medicinal or legal services, there is one more
important dimension related to the professional, and that is ‘responsibility’. The clients are
equally responsible for the outcome of the services received from the professionals and this
makes it difficult to say that who is responsible for poor quality of outcomes. Some examples
are given here in support this argument.
---------------------------------------------------------------------------------------------------------------------
Example Set-2
a) Despite the best of teaching efforts by the teachers, students may not score good
marks, if they do not study hard.
b) Despite appropriate medicines prescribed by the doctors, patients may not heal if
they do not take the medicines regularly or do not follow the dosage or precautions
suggested by doctors.
c) If petitioners do not inform all the relevant information to their advocates, how can
advocates prepare unchallengeable argument and they may face embracing situation
in the court of law if some issue is raised by the opponents’ advocates based on the
facts hidden by the petitioners.
--------------------------------------------------------------------------------------------------------------------
Therefore, the outcome of the services provided by the professionals depend on the efforts
and contributions of the clients as well. It means that, if the outcomes do not come out as
expected, it may be difficult to identify whether it is due toa mistake of the professional or of
the client. The services provided by the professions such as medicine, education and law are
not only very complex, but also, these services provided are also in a very uncertain social
and human context. Therefore, despite best efforts of both professionals and the clients, the
outcomes may not match the expectations. Some examples are given here to support this
argument.
-------------------------------------------------------------------------------------------------------------------
Example Set-3
d) Doctors must take decisions based on clinical examinations of the patients and
pathological tests, but unfortunately most of these are not fully reliable because, for
the same parameters, different methods of tests may reveal different findings. Even
the timing of test or factors such as, whether the test sample was taken before or
after meals, which may affect the measurement of parameters. The quality of
medicine may not be as expected; the medicine may have different effects if taken
with different kind of foods or with other medicines. If some medicines are not
stored at particular temperature at pharmacy store, its effectiveness may reduce.
Even it is reported that the effectiveness of good quality medicines get reduced after
some years, as the bacteria or viruses have developed immunity against such
medicines. All these factors add up to the uncertainty about effectiveness of the
medical treatment. Thus, despite best efforts by the all concerned, the expected
10. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 10
results may not be obtained and it becomes practically impossible to identify the
actual cause of ineffective treatment.
e) Similarly, in case of education, the performance of students in a particular
examination may depend on many factors other than their own and their teachers'
efforts. It may depend on students' health and mood on the day and time of
examination, the tendency of question paper designer may set a very difficult or
moderate or easy question paper. The assessor may be liberal, moderate or stringent
in giving marks and depends on luck of the students. If student is very lucky, then
s/he may get questions in the examination for which s/he may have rote learned, if
not rote learned, the student may even fail.
f) In case of legal profession, the situation is more subjective. It is often in the news
that in a particular case, the decision of Trial Court was reversed by the High Court
and in some cases; the decision of High Court was again reversed by the Supreme
Court. In such cases, it is difficult to blame anyone. It is the nature of the human and
social situations that same situation may be interpreted differently by different
judges. Therefore, in cases of national and social importance, a bench of judges is
constituted so that the merit of the case may be judged in different perspectives. The
point here is that, despite best efforts of a capable lawyer, the client may not get
justice in a particular court because the view of judge may be different and it may be
right in its own way. Thus, it is difficult to make the advocate or lawyer responsible
for unfavorable decision. It depends on many factors such as, perspective of judge,
performance of witnesses in the court, sincerity of investigating agency such as police
and forensic department and other such agencies.
---------------------------------------------------------------------------------------------------------------------
6.2 Reasons for Uncertainty
From above discussions, it is obvious that it is difficult to ascertain that whether
professionals have performed to match the expectations of the client or not. Following are
some reasons that are mainly responsible for such situations.
a) For clients it is difficult to define or specify, what is good quality education, good
quality medical treatment or good quality legal services. This is because these
services are very complex in nature and depend on several factors as seen above. In
many situations, good or bad effects of the education or medical treatment are
known only after long time has elapsed.
b) The outcome or result of the services provided by professionals do not depend only
on their capabilities and efforts but also depend to a great extent on the
contributions of their clients for example hard work of students in case of education,
sincerity of patients in following instructions of doctors and petitioners in informing
all relevant facts to the advocate.
c) The social and human situation is so uncertain that outcomes of education, medical
treatment or legal services not only depend on the capabilities and efforts of
11. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 11
professionals and clients but also depends on many other factors which are neither in
control of professionals no rof clients.
--------------------------------------------------------------------------------------------------------------------
Therefore, the relationship between professionals and clients cannot be same as between
traders and customers. In case of goods, customers demand what they want from the
traders and the traders supply the goods of the specified quality. In fact, there are specified
procedures by which the quality of the goods can be tested before delivery to the customer.
In such cases, the quality of goods can be ensured mainly by the providers irrespective of the
way the product or service is used by the customer. Hence, even if the quality of product is
not as specified, then customers may get their money back. If customers do not get the
money back, then they may go to the consumer forum or court for justice.
However, in the case of professionals, their clients may not know exactly what is required by
them. Therefore, it becomes the responsibility of the professional to suggest what will suit
the client according to their situations and then both professionals and clients jointly decide
what is required and both work together to achieve the desired aim. This relationship is
more personal, more intense and lasts long. Since clients do not know what is exactly
needed by them and the professionals suggest what is appropriate for them, this makes
clients completely dependent on the professional. Hence, the relationship of professional
and client is not based on equal terms as in the case of trader and customer. It is a kind of
power relationship where the professionals have the upper hand. This power relationship is
not the same as between 'administrators' and 'administered' which is based on fear, but the
relationship between professionals and their clients is based on faith or trust.
In fact, when students develop faith in a teacher they surrender their mind to teacher -
whatever teacher teaches the students believe and learn. When patients develop faith in a
doctor they surrender their bodies to doctor - patients takes the medicines that the doctor
prescribes, becomes ready for surgery under general anesthesia where the whole body is
under doctor's control. In the legal profession, when the petitioner develops faith in an
advocate, s/he surrenders their fate to the advocate. However, if the advocate does not
offer work properly, the petitioner may lose the case in the court of law, which may affect
his/her entire life prospects. Thus, the relationship is based on trust and faith. Hence, to
develop this faith in clients, professionals must first develop the trust in their clients by
depicting an honest and sincere behaviour consistently. Although the clients pay the fees to
the professionals for their services, the relationship has human touch and is only based on
trust.
ACTIVITY 4
List down at least two incidents of how you could/can build up the trust between you
and the client and submit them in the E-portfolio.
12. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 12
6.3 How Trust Can Be Built Between Professional and Client
It is essential that the relationship between professionals and their clients is based on trust
which should not be breached. It is the responsibility of the professionals to build this trust
with the client for effective and smooth services. Building this trust is not an easy task and it
requires a great amount of effort and sometimes even sacrifices on the part of the
professionals. How to build this trust is discussed in detail in the lesson related to
‘Professional Excellence’.
7.0 PROFESSIONALS ARE SELF-REGULATING
Since professionals are experts and are at the top of their professions and possess mastery
on a complex body of knowledge, it is difficult for a common man to identify mistakes of
professionals and even if a client is able to notice the intentional malpractice or
unintentional mistakes committed by professionals, the power relationship between client
and professionals is such that it is difficult for the client to highlight those mistakes or
malpractices in front of the professionals. Some professionals misuse this situation for their
short-term gains. Since it is a matter of expertise, even courts of law find it difficult to punish
a professional for his/her wrong doings. The following example will help to clarify this:
--------------------------------------------------------------------------------------------------------------------------
Example 4
If a student complains in the court of law that due to some prejudices, his/her teacher of a
particular course has given him/her less marks as compared to what s/he deserves, then the
judge will not be able to decide whether concerned teacher has given appropriate marks or
not, the Judge may be forced to appoint a committee of three other professors of that
subject to examine the concerned students and find out the facts. Thus, only professionals
can identify mistakes or malpractices of their fellow professionals.
---------------------------------------------------------------------------------------------------------------------------
If more professionals become complacent and do not do their duty sincerely, or, due to
some kind of greed, commit intentional malpractices; then it brings disrepute to that
profession. Trust of the client in that profession erodes. In the long run it may become
difficult for the professionals to function effectively. An example can illustrate this further.
---------------------------------------------------------------------------------------------------------------------------
Example 5
In developed countries, where medical practitioners started to charge high fees from their
patients. In pursuit of earning more money, they started treating more patients and giving
them lesser time to each patient and in this process eroded the trust between doctors and
patients. If this trust deficit exists and something goes wrong in the medical treatment and
the doctor is not able to cure the patients, then the patients may not hesitate in taking legal
action and claim compensation from doctors who will be forced to pay. However, it may be
very difficult to say with guarantee that it is because of the negligence of the doctor only.
--------------------------------------------------------------------------------------------------------------------------
13. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 13
As discussed earlier, the treatment of illness involves high degree of uncertainty, as many
factors are responsible for successful treatment and out of these factors, considerable
numbers of factors are not in the control of the doctors. Just because of the greed and
malpractice of some doctors, people have started to see all doctors with suspicion.
Therefore, of late doctors are getting their practice insured, to avoid paying the huge
compensation so that, in case something goes wrong the insurance company pays the
compensation. Ultimately, the cost of insurance premium is collected from patients as part
of consultation fee and this further increases the cost of treatment.
Similarly, misuse of autonomy by some teachers in giving marks to students based on their
liking or disliking due to personal reasons rather than academic reasons have reduced the
trust in teaching community and society felt the need of external examinations by the
‘Examination Boards’ or affiliating universities. This has increased the cost of examinations,
as students have to spend extra time and money in external examinations, which in turn
reduces the time and resources available for stress free teaching-learning process.
Therefore, for a smooth functioning of every profession, it is mandatory that the behaviour
of every professional remains high in the eyes of the society. For this to happen, the
professionals must maintain the highest standards of integrity in their practice and conduct,
so that society continues to trust them. Unfortunately, due to a few individuals in every
profession who misuse this relationship of trust to satisfy their ever-increasing greed, has
brought disrepute to the professions and has made the society suspicious of even honest
professionals. Therefore, if professionals want that prestige of their profession to remain
intact, then it becomes the duty of the conscious professionals not only to self-regulate
themselves but also, to prevent their fellow professionals from engaging in malpractices.
Leaders amongst the professionals need to form professional societies or councils and make
it mandatory for their fellow professionals to become members of these societies/councils.
These societies/councils ensure that professionals maintain at least, some minimum
standards of expertise and exhibit honest and ethical behavior in their practice.
Governments also give some regulating power to these councils by act of parliament. Some
examples of councils and societies are-
a) All India Council of Technical Education
b) Council of Architecture
c) Medical Council of India
d) Nursing Council of India
e) Pharmacy Council of India
f) Bar Council of India
g) Indian Society for Technical Education.
14. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 14
Some of these societies or councils are entrusted with the powers of issuing licenses to
practice to its members. These councils also make code of conduct and every member is
supposed to follow it. In case, a member breaches this code of conduct, even after
reprimanding a member for mending his/her ways, then the professional body/council may
punish him/her and in extreme cases, the council may revoke the license of practice issued
to such members.
Thus, professions have to be ‘self-regulating’ to maintain their prestige and relationship of
trust they enjoy with society. In case of other occupations, public at large can ensure quality
of goods and services just based on their common sense and general knowledge. For
example, if politicians do not work up to expectations then the public votes them out. If
administrators do not work up to their expectations, then the politicians (ministers) can
control or punish them. If businessmen do not deliver, then market forces throw them out.
Thus, self-regulation is a necessity for professions, as compared to other occupations. This is
because, the working of professions is so complex that, only the members of that profession
can understand which member is engaged in malpractice.
8.0 SUMMARY
If you want to determine whether any occupation may be termed as a profession or not, you
must check the presence of the five essential characteristics mentioned in this lesson. Even if
one of the five characteristics is missing, then that occupation cannot be termed as a
profession. If the practitioners of any occupation say administrators follow above five
characteristics, then it may help them to excel and look different from others in their
occupation. The corollary of this proposition is that, if the so-called ‘professionals’ do not
follow these five characteristics in their profession, then they no more remain true
professionals. For example, if a faculty member of an higher education institute do not do
make any efforts to create new knowledge in his/her field of specialization (by reading
journals/attending conferences and so on) and do not contribute to the creation of new
knowledge by engaging in research or guiding student’s researches, then s/he is not fulfilling
the condition number (ii) and hence s/he is not a true professional.
It is obvious from the discussions thus far, that all occupations such as administrators and
executives (IAS, Income Tax commissioners, Revenue officers and other Govt. Officers,
Managers) Armed Forces (Military, Police, and such others), Traders (Businessmen and
Marketing Executives), Workers (technicians, plumber, carpenters, clerks and such others)
work for the benefit of the society and require some knowledge, skills and a great degree of
honesty and sincerity. Although, all these occupations are very important for the society, but
ACTIVITY 5
List down at least two steps that you have decided to take for 'self-regulation' of
yourself and submit them in the E-portfolio.
15. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 15
they generally do not fall under the category of professions as in all of these occupations,
the five characteristics as discussed in the beginning of this lesson.
****
BIBLIOGRAPHY
[1] Gaur, R.R, Sangal, R, G.P.Bagaria (2010) – A foundation course in Human Values and Professional
Professional Ethics; Excel Books, New Delhi
[2] Chopra, Deepak – ‘The Seven Spiritual Laws of Success’, Hay House, New Delhi, (2008) Reprint 28th
2020.
[1] Altekar, A.S. ‘Education in Ancient India’ Delhi: Isha Books, 2009
[2] Chitkara, M.G., ‘Education and Human values’ Delhi: APH Publishing Corporation, 2003
[3] Sahu, B., ‘The New Educational Philosophy’ Delhi: Sarup and Sons, 2002
[4] Anderson, L. W., & Krathwohl, D. R. , A Taxonomy for Learning, Teaching and Assessing - Á revision of
Bloom's taxonomy of Educational Objectives. Pearson Education. 2001.
16. Unit 1: Technical Teachers as Professionals L1: Professions and Professionalism
AICTE–NITTT Module 02: Professional Ethics and Sustainability NITTTR, Bhopal Page 16
L–1 DISCUSSION FORUM
Start a discussion on social media on any one or more of the five characteristics of your
profession.