This document contains the resume of Jaydeep Bhatt, who has a Master's degree in Electrical Engineering from the University of North Carolina at Charlotte and a Bachelor's degree in Electrical Engineering from Gujarat University in India. It summarizes his professional experience in power system design and engineering for industrial plants at Larsen & Toubro Ltd. and as an intern at Siemens Industry Inc. It also lists his relevant coursework, projects, and software proficiencies related to power systems, energy analytics, and electrical engineering.

1. JAYDEEP BHATT
212 Barton Creek Drive
APT# G  6099079480
Charlotte, NC 28262  bronak7@gmail.com
Page | 1 of 2
EDUCATION
 Masters in Electrical Engineering (December 2015)
University of North Carolina at Charlotte, USA
Concentration: Power Systems
 Bachelor of Engineering (Electrical) Gujarat University, India, June 2011
SUMMARY
 Project experience in power system design, detailed engineering and industrial plant design and
applications.
 Performed power system study – load flow, arc flash analysis, short circuit calculations and relay co-
ordination.
 Designed switchyard and electrical distribution systems involving equipment such as transformer, automatic
power factor correction capacitor banks, relays, drives and emergency DG Sets.
 Prepared single line diagram, plan and section layouts and control and protection schematics.
 Carried out lighting & earthing design and layouts, sizing and routing of cables & trays.
 Prepared lightning protection schematics.
 Prepared design basis, engineering information document, cable schedule, Bill of material, motor & electrical
device list and Instrument list.
 Designed complex Category 3 plus monitoring safety circuits for critical and hazardous applications on making
and packing line.
 Prepared technical proposals and provided technical support to sales group.
 Provided cost-effective solution for power distribution projects to meet customer requirements.
 Conversant with Electrical Standards – NEC,IEC, IEEE and IS.
 Proficient in AutoCAD and power system analysis software –ETAP, SKM power tools.
 Proficient with Energy analysis, load forecast and gas forecast.
 Acquainted with LabVIEW Multisim, PowerWorld, PSCAD & MATLAB software and DIALUX – lighting
calculation, MS Visio, Salesforce.com, SAS.
GRADUATE COURSEWORK
 Power system generation, operation & control
 Power system distributions
 Electrical machines
 Power system analysis 2
 Power system relaying
 Energy Analytics
 Smart grid operation and Control
 High voltage engineering (course being taken
by EPRI)
 Symmetrical components
 Engineering decisions and risk analysis
RELATED PROJECTS AND PAPERS
 Modelling, analysis and improvement of voltage profile – Performed load flow study of IEEE34 bus
system with various switching schemes using ETAP. Analyzed the voltage at different buses and improved
the voltage at all buses using capacitive compensations, booster transformers & changing the transformer
taps.
 Design of Photovoltaic system – Designed the 2MW PV system with buck/boost converter and inverter and
integrated it with the seven bus system connected to infinite grid using PSCAD.
 Photo Voltaic system Battery design and Interconnection with Grid Analysis – Sized the battery using
IEEE 485 and analyzed the PV system with varying irradiance and MPPT controller. The objective was to
linearize the output from PV to the microgrid.
 Capacitive discharge circuit –Proposed the super capacitor circuit in parallel with the battery as a combined
unit that can be kept in parallel with induction motors. The unit when used with battery bank can reduce the
standalone battery bank size substantially. The system can also be applied in electric vehicle’s needing inrush
power because of high initial torque.
 Gas and Load Forecast –Have taken part in various competition all over the world. Have performed projects
in Long term load forecasting, Short time load forecast, Long term gas forecast, long term probability load
forecasts etc. Making models to verifying cross effects of various parameters, applying Recency effect,
holiday effect and weekend effect finally to improve the MAPE and some case Pinball loss function.

2. JAYDEEP BHATT
212 Barton Creek Drive
APT# G  6099079480
Charlotte, NC 28262  bronak7@gmail.com
Page | 2 of 2
PROFESSIONAL EXPERIENCE
Siemens Industry Inc., Wendell, NC (www.usa.siemens.com) June 2015 – August 2015
Intern at Energy Management division, Medium voltage and systems Business unit
 Worked at Project management office.
 Involved in project management for Medium voltage switchgear and controllers, Distribution Circuit breakers
and reclosures.
 Used Salesforce.com to manage project. Maintain schedule of a project from pre order to engineering design
to Warranty support.
 Siemens GMSG switchgears design to order engineering drawings approval and release.
 Worked for developing automatic schedule generator in salesforce and internal project management work
processes.
 Designed work process flow chart for the project management office which links processes like pre order,
engineering tasks, Manufacturing tasks, FAT, shipping and warranty support.
Larsen & Toubro Ltd., India (www.lnties.com) August 2011 – December 2013
Executive Engineer
 Worked in a fast paced deadline based environment with diversified teams in different Countries
 Designed power distribution system for FMCG plants & Beauty care plants for Fortune 100 MNC client
 Involved in conceptual system and detail engineering with Built to Print document for electrical power
distribution from 132kV to 415V substation and industrial plants such as Making and Packing Machine lines
 Involved in Power system studies including short circuit, arc flash evaluation & relay co-ordination.
 Designed and calculated illumination required for manufacturing plants, offices, landscape lighting and street
lighting with sensors.
Projects
 Green field 132kV substation and power distribution project at Hyderabad, India:
 Designed and handled project for 132 kV substation, power distribution system at 11kV and 415V
 Transformer sizing, generator sizing, compressors and HVAC
 Created flowchart for zero bus synchronism of DG sets
 Designed distribution system for overall lighting, earthing and lightning protection for office buildings
 Project at Singapore involving power system studies with arc flash evaluation, short circuit & relay and
breaker co-ordination.
 Project at Alexandria and Kansas, USA involving power distribution system design and safety circuit logic
design of Dry laundry Making & Packing lines.
Project at undergraduate level September 2007 – June 2011
Project
 Electromagnetic Projectile Accelerator (Coil Gun), Simulation as well as working model prepared which works
on the principle of Linear motors. Consisted of two main units 1) Charging unit and 2) Discharging unit. With
3.5V battery 4- 330 uF Capacitors were charged to 400 Volts in parallel and Discharged in Series on a coil
wound around the barrel with the projectile inside it.