Dear Respected Sir,
I am forwarding my CV for a Solar Power Plant Installation / Service in Gujarat State or Any Part of India ( Ready to Travel).
Experienced in Solar power plant Field Work (Total Experience: 4.5 years, 3.5 years in Solar Power Plant Project Engineer ( Electrical) ) . I have great skills in solar Power Plant:commissioning and O&M activities, special 100 KW & more solar Power Plant. I want to work on MW solar power Plant project. Please go through my resume attached with this mail.
I have done graduation in B. E. in Electronics & Communication, I have rich skill in Solar Power Plant Electrical PROJECTS and Electrical Grid Power Commissioning, Inspection with Government Chief Electrical Inspector with CAD Drawings, Electrical Safety Rules, and International Standards ( IS) Rules for Project Approval and Project Commissioning.
Currently, on going Solar Rooftop installation of 220 KW on industrial Tin Roof Structure at two locations in Ahmadabad, Gujarat state.
I have good skills in communication and computer network knowledge.
Current CTC: 2.7
Expected CTC: According to your company standards.
Ready to travel to distant sites for inspection & service. Good communication in English. Willing to relocate and travel international ( Passport Ready)
Interested to work sincerely for the growth of the organization and accept Challenges.
Thanking you
With regards,
Mr. Graceson Jacob
Sector 3D,
GANDHINAGAR,
Gujarat
India.
Mob:09824104095 / 09408707445
Dear Respected Sir,
I am forwarding my CV for a Solar Power Plant Installation / Service in Gujarat State or Any Part of India ( Ready to Travel).
Experienced in Solar power plant Field Work (Total Experience: 4.5 years, 3.5 years in Solar Power Plant Project Engineer ( Electrical) ) . I have great skills in solar Power Plant:commissioning and O&M activities, special 100 KW & more solar Power Plant. I want to work on MW solar power Plant project. Please go through my resume attached with this mail.
I have done graduation in B. E. in Electronics & Communication, I have rich skill in Solar Power Plant Electrical PROJECTS and Electrical Grid Power Commissioning, Inspection with Government Chief Electrical Inspector with CAD Drawings, Electrical Safety Rules, and International Standards ( IS) Rules for Project Approval and Project Commissioning.
Currently, on going Solar Rooftop installation of 220 KW on industrial Tin Roof Structure at two locations in Ahmadabad, Gujarat state.
I have good skills in communication and computer network knowledge.
Current CTC: 2.7
Expected CTC: According to your company standards.
Ready to travel to distant sites for inspection & service. Good communication in English. Willing to relocate and travel international ( Passport Ready)
Interested to work sincerely for the growth of the organization and accept Challenges.
Thanking you
With regards,
Mr. Graceson Jacob
Sector 3D,
GANDHINAGAR,
Gujarat
India.
Mob:09824104095 / 09408707445
Master of Engineering in Power Electronics and Drives. Actively Looking for Job opportunity to work in core domain. Have Industry Experience in Bharat Heavy Plate and Vessels Ltd. Published and presented an IEEE paper on Control of Doubly Fed Induction Generator connected to Variable Speed Wind Turbine in Technological Advancements of Power and Energy at Amritapuri, Kerala
Creative, ambitious and knowledgeable engineering professional seeks to utilize my perfect skills and experience in the Electrical Engineering Field (Power & controllers) to meet and exceed all goals in your organization while advancing my own Career.
6 razones por las que las ideas de negocio innovadoras fracasan.Instinto Emprendedor
Conoce algunas de las razones por las cuales ideas de negocios innovadores fracasan.
Web: http://instintoemprendedor.com/
Artículo: http://instintoemprendedor.com/razones-fracaso-ideas-de-negocio-innovadoras/
Master of Engineering in Power Electronics and Drives. Actively Looking for Job opportunity to work in core domain. Have Industry Experience in Bharat Heavy Plate and Vessels Ltd. Published and presented an IEEE paper on Control of Doubly Fed Induction Generator connected to Variable Speed Wind Turbine in Technological Advancements of Power and Energy at Amritapuri, Kerala
Creative, ambitious and knowledgeable engineering professional seeks to utilize my perfect skills and experience in the Electrical Engineering Field (Power & controllers) to meet and exceed all goals in your organization while advancing my own Career.
6 razones por las que las ideas de negocio innovadoras fracasan.Instinto Emprendedor
Conoce algunas de las razones por las cuales ideas de negocios innovadores fracasan.
Web: http://instintoemprendedor.com/
Artículo: http://instintoemprendedor.com/razones-fracaso-ideas-de-negocio-innovadoras/
Electrical and control engineer for hammond solutionBakhte Karam
An effective and meticulous engineering professional with key expertise in the, energy oil & gas and manufacturing industries, skills in design engineering and systems optimization, extensive fault analysis and troubleshooting skills and advanced technical abilities enable me to quickly solve problems at the root cause, recognized and winner of various awards for my ability to multi-task efficiently in demanding and sensitive situations, earned the respect and confidence of my peers and customers for continuous improvement.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Vaccine management system project report documentation..pdf
electrical engineer
1. BHASKAR ETHIRAJULU
Bangalore, Karnataka, India.
Cell No.: +91-9742606321; E-Mail:bhaskarethirajulu@gmail.com
PASSPORT NO : P5888603
EDUCATION: B.Tech- Electrical,2009: BitInstitute of Technology (AffiliationwithJntuAnantapur University)
M.tech–Electronics andDrives,2012: KonerlakshmiyaInstituteof Technology (Affiliation with KL
University)
SUMMARY
A highlyexuberantEngineer&EstimationEngineer with more than 3+ years of experience
in the field of Electrical designing & Estimation with specialization in the domain of
planning&supervisionwellversedwiththe engineeringtechniquesandcapable of ensuring
flawless project managements.
Company:Primetech Acculators Pvt Ltd, Bangalore, Karnataka, India
Work Experience: Electrical Engineer Period:March 2009 to Sep 2010 (1 Year and 6 Months)
PRIME make TubularPlate range of Industrial batteries and Solar batteriesare designed
and Manufacture for better performance and long service life even under rigorous
usage conditions.
Responsible for all engineering works.
Providedtechnical supportforcustomerson Design, operational, maintenance aspects
of the services being provided.
Solid experience in battery circuit design.
Maintained and serviced uninterruptible power systems.
Excellent working knowledge and understanding of inverters, battery units and
UPS/INVERTER systems.
Performed preventative Maintenance, and Design, Remedial service, and emergency
repair services on various brands of UPS Systems, batteries. Coordinated, troubleshot
and repaired UPS equipment.
Company:Emarga Technology Services Pvt Ltd, Bangalore, karnataka, India
Work Experience: Electrical Coordinator Period: june2013 –July 2014 (1 Years)
Preparedthe Electrical LoadCalculation,Electrical LayoutDrawing,SinglelineDiagram
Using AutoCAD.
Developedinitial drawingsanddesignsusingMicrostation
Discussedpossible modificationswithelectrical engineersandarchitects and
implementedthemaccordingly
Providedmaterial specificationsandcoordinatedwiththe warehousingdepartmentto
ensure quickdeliveryof the material
Oversawthe installationproceduretoensure thatitisidentical tothe blueprint
Followedsafetyanddesignstandardsthroughoutthe project
Performeddifferentteststoensure safetyandfunctionalityof the installedsystems
2. Maintainedprojectreportsandothertechnical documents
Company:The Chancery Pavilion, Bangalore, Karnataka, India
Work Experience: Maintenance Engineer Period: june2015 – present (1.5 Years)
Maintain and check the DG 1010KVA,750KVA in every 12 hours of working condition
process
Taking the KWH bescom1600KVA transformer reading.
Take care of the overall condition of the facility.
We will ensure that the walls, ceilings, fixtures, electrical systems, elevators, parking
lots, etc. are in good condition and there is no complaint from guests for whatever
reason.
Goingthe roundsfromtop to bottominthe buildingall majorcomplaintswill notice and
disuse with higher officials and give the suggestion in the briefing and allocate the
complaints for consultant persons.
Through knowledge of plant operations and national fire codes
Repair, replace, and maintain the entire plant systems of the facility
Observing the Vacuum circuit breaker every day.
Document parts replaced and repaired.
KEYSKILLS
Auto CAD, Electrical CAD, Or-CAD
Proficiency in entire MS-Office
Windows XP , Win-7 & 8 , Linux
IEC & IS Standards Experience
Solarsystems
Inverters
Converters
Powerelectronics
Power systems
ACADEMY PROJECTS
M.TECH
A THERE –PHASE FIVE –LEVEL PWM DC-DC CONVERTER USING H-BRIDGE
The major reason is that three –phase DC-DC converters can achieve lower power
components current stress and also considerably reduce input and output filter
requirements, when compared single phase topologies
B.TECH
POWER UPGRADING OFTRANSMISSION LINES BY COMBINING AC-DCTRANSMISSION
This project proposes a long extra high voltage (EHV) ac line cannot be loaded to their
thermal limits in order to keep sufficient margin against transient instability. With the
scheme proposed in the project ,it is possible to load these lines very close to their
thermal limits. the conductors are allowed to carry usual AC along with DC
superimposedonitforthe particularsystemstudied,there issubstantial increase(about
83.45%) in the load abilityof the line .the DC power flow does not impose any stability
problem.
3. ACHIEVEMENTS:
Cost reducedof lightingfixtures,lightingpoles&lightingcablesbychanginglighting design
Cost reduced of power & control cables by changing cable route
Designed MCC Panel with changing separate compartment for Digital Input (DI), Digital
Output (DO), power cables & control cables.
PERSONAL DETAILS:
Father Name : E.Rama Krishna
DOB : 10th mar 1987
Gender : Male
Nationality : Indian
Marital Status : Single
Languages : English,Telugu,kannada,Hindi
PASSPORT NO : P5888603
DECLARATION:
I considermyself familiarwithdesign&detail engineeringaspects.i am also confident of my ability to work
in a team.
I hereby declare that the information furnished above is true to the best of my knowledge and belief.
(Bhaskar.E)