The document discusses Smith's Grease+Gard II grease recovery device. It can be used on above-floor and in-floor grease interceptors as well as a retrofit on most other manufacturers' interceptors. The Grease+Gard II uses belt technology, heating, and an agitator to remove grease from the interceptor. It is available in different models for various installation needs. The Grease+Gard II is listed by IAPMO and certified by PDI as a grease removal device. Smith now offers a full line of grease and solids interceptors and recovery devices to meet different budgets and applications.

1. SMITH
®
SINCE 1926
Member of Morris Group International MORRIS GROUP
INTERNATIONAL
CUSTOMER DRIVEN
®

2. • Grease+Gard II–What is it?
• Market Issues
• Grease+Gard II Sales Opportunity
• Grease+Gard II Models
• How Does It Work
• The Agitator
• Grease+Gard II Operation
• Installation/ Applications
• Listings/ Certifications
• Grease+Gard II System Summary

3. • Grease+Gard II is the first approved Grease Recovery Device (GRD)
that can be used on above-the-floor and in-floor grease
interceptor applications.
• Grease+Gard II is also the first approved GRD application
device that can also be used as a retrofit unit on most other
manufacturers’ interceptors.

4. • Dealing with grease; dipping, pumping/disposal
costs and cleaning pipe blockages.
• Cleaning schedule, frequency and related high
operating costs.
• Meeting stringent discharge requirements and
paying surcharges/fines for non-compliance.
• Increasing enforcement and tightening of
Federal regulations.

5. • Smith now has a competitive GRD that equals the competition.
• Grease+Gard II Retrofit Skimmer (Pat. # 7,296,694)
is the only retrofit device intended for GRD applications
on the market today.
• The retrofit unit can be installed on most interceptors, saving
thousands in interceptor replacement costs.
• The retrofit unit is a less expensive alternative to a standard grease
recovery device.
• Meets applicable code requirements.
• Efficient and simple solutions for different applications.

6. Fig. No. 8960
Solids interceptors provide a way to collect food solids
to prevent them from entering the grease interceptor.
Jay R. Smith Mfg. Co. offers an array of optional inline
solids interceptors and indirect waste solids with
Grease+Gard II systems in extreme applications .
Fig. No. 8980

7. • Belt technology along with a heater
and timer.
• The belt cycles through the grease layer.
• Grease sticks to the belt.
• The skimmer blades wipe the grease
off the belt.
• The grease goes off the skimmer
blades and into the grease trough.
• The grease trough feeds the grease
into the grease bucket where it
is collected and removed daily
to a barrel for proper disposal.
Inline solids interceptor is optional
and not included with the purchase
of the Grease+Gard II unit

8. • Grease + Gard II eliminates the
need to stir the contents with
Agitator technology, which
maintains circulation
in the interceptor.
• Helps circulate the top
grease layer.
• Aids in drawing the grease
to the belt.
• Patented # 7,296,694.

9. Jay R. Smith Mfg. Co.
Grease+Gard II
Grease
Integral Reservoir
Jay R. Smith Mfg. Co. Separator
Soilds Interceptor Bucket
Optional Unit
Sold Separately
Skimmer Belt
& Blades
Agitator
Direction
of Flow
Thermostat &
Heaters
Solids are captured before
entering the Grease+Gard II

10. • This GRD model can be used on
most in floor and above floor
interceptor applications.
• The tower is 13 1/4” high from the
interceptor cover.
Fig. No. 8165
• Can add an extension to in ground
applications if needed.
• Available in 20, 25, 35 and 50 GPM.
Fig. No. 8166

11. Fig. No.
8165
Fig. No. 8166
Regularly Furnished: Automatic Grease Recovery Device (GRD) with Type 304
Stainless Steel Interceptor, No-Hub Connections, Flow Control Fitting, Dual Heaters
and Grease+Gard® II Skimmer with Grease Reservoir.

12. • This model is designed to fit
into tight spaces where there
are clearance issues.
• It is designed for above floor
installations only.
Fig. No. 8175
• The tower is 7 1/4” high from the
interceptor cover.
• Available in 20, 25,35
and 50 GPM.
Fig. No. 8176

13. Fig. No.
8175
Fig. No.
8176
Regularly Furnished: Automatic Grease Recovery Device (GRD) with Low
Profile Grease+Gard® II Skimmer and Grease Reservoir, Dual Heaters, Type 304
Stainless Steel Interceptor with No-Hub Connections and Flow Control Fitting.

14. • Retrofit on existing grease
interceptor cover.
• This model can be used on
most in-floor and some above
floor interceptor applications.
• The tower is 13 1/4” high.
• Requires a square cut out of the top of
the interceptor for installation.
Fig. No. 8165GG

15. Fig. No. 8165GG
Regularly Furnished: Stainless Steel Housing, Adjustable Timer, Skimming Belt,
Mounting Base with Gasket, Dual Heaters and Removable Grease Reservoir.

16. • Retrofit on existing grease
interceptor cover.
• This model is designed to fit into
tight spaces where there are
clearance issues.
• The tower is 7 1/4” high.
• Requires a cut out of the top of the
interceptor for installation.
Fig. No. 8175GG

17. Fig. No. 8175GG
Regularly Furnished: Low Profile Stainless Steel Housing, Adjustable Timer, Skimming Belt,
Mounting Plate with Gasket, Dual Heaters and Removable Grease Reservoir.

18. Fig. No. 8960
• Sold Separately–not included with
the Grease+Gard II.
• Inline and indirect solid interceptor assemblies
to be installed at the solids source.
• Primary and secondary straining systems in
each system. Any solids due to erosion that Fig. No. 8980
pass the primary screen and sink to the bottom
of the sump will be captured and removed by
the filter bag.
• Future capabilities of being semi-automatic.

19. Fig. No. 8960
Regularly Furnished: Fabricated Type 304 Stainless Steel Body with Adjustable
Legs, Perforated Bottom Bucket and Secondary Poly Mesh Strainer.

20. Fig. No. 8980
Regularly Furnished: Fabricated Type 304 Stainless Steel Body with AdjustableLegs,
Perforated Bottom Bucket, Secondary Poly Mesh Strainer and Secured Cover.

21. The Grease+Gard II - Grease Recovery Device can be used to remove excess grease from the
interceptor in any kitchen facility. The drawing below shows how the Grease+Gard II might be
used in conjunction with other products in a typical kitchen setting.
Inline Solid Interceptor Low Type Stainless Steel GRD
Fig. # 8980 (Optional) with Integral Separator Bucket
Fig. # 8166
Smith Stainless
Floor Drain
Fig. # 9700
Smith Stainless
Cleanout Inline Solid Interceptor
Fig. # 9760 Fig. # 8980 (Optional)
Smith Stainless Stainless Steel GRD with Low Profile Skimmer
Floor Sink with Integral Separator Bucket
Fig. # 9691 Fig. # 8175

22. Commercial Kitchen and Food Processing Applications
• Restaurants
• Grocery/Convenience Stores
• Churches
• Casinos
• School Cafeterias
• Correctional Facilities
• Retirement Homes
• Mall Food Courts
• Airport Eateries
• Sports Arenas

23. • IAPMO listed as a GRD for territories using the
Uniform Plumbing Code (UPC).
• This IAPMO listing of our GRD’s is for both new installations
and retrofit installations on other manufacturers’ interceptors.
• The 8165GG and 8175GG are IAPMO listed through the MC
(Material and Component) listing program.
• PDI Certified.
• Tested and certified to the National Consensus Standards
ASME A112.14.3 and A112.14.4 – Grease Removal Devices.

24. • Smith now has the broadest product line of Grease and Solids
Interceptors in the entire industry = more opportunities to close
a sale to fit everyone’s budget or configurations.
• Grease+Gard II Retrofit Skimmer (patent pending) is the only retrofit device
for GRD applications on the market today.
• Grease+Gard II Retrofit Skimmer can be installed on most interceptors, saving
thousands in interceptor replacement costs.
• The Retrofit Skimmers (8165GG and 8175GG) are less expensive alternatives to
grease recovery devices.
• Approved, efficient and simple
solutions for different applications.

25. SMITH
®
SINCE 1926
Member of Morris Group International
CUSTOMER DRIVEN
Post Office Box 3237
Montgomery, Alabama 36109-0237
(800) 467-6484
www.jrsmith.com
MORRIS GROUP
INTERNATIONAL
www.morrisgroup.co