An overview of Jay R. Smith Mfg. Co.'s Grease+Gard System. Please see the Grease Gard II for updated model information. For more information, please visit http://www.jrsmith.com

2. Grease+Gard™ – What is it?
Market Issues
Grease+Gard™ Sales Opportunity
Grease+Gard™ Models
How Does It Work
The Agitator
Grease+Gard™ Operation
Installation/Applications
Listings/Certifications
Grease+Gard™ System Summary

3. • The first approved Grease Recovery Device
(GRD) that can be used on above-the-floor and
in-floor grease interceptor applications.
• Grease+Gard™ is also the first approved GRD
application device that can also be used as a
retrofit unit on most other manufacturers’
interceptors.

4. • Dealing with grease; dipping, pumping/disposal
costs and cleaning pipe blockages
• Cleaning schedule, frequency and related high
operating costs
• Meeting stringent discharge requirements and
paying surcharges/fines for non-compliance
• Increasing enforcement and tightening of
Federal regulations

5. • Smith now has a competitive GRD that equals the
competition
• Grease+Gard™ Retrofit Skimmer (patent pending) is the
only retrofit device intended for GRD applications on the
market today
• The retrofit unit can be installed on most interceptors
saving thousands in interceptor replacement costs
• The retrofit unit is a less expensive alternative to a
standard grease recovery device
• Code approved
• Efficient and simple solutions for different applications

6. • New Construction
– Regular Profile Grease+Gard™ GRD
• Fig. No. 8165 (20, 25, 35, 50 GPM)
• Fig. No. 8166 Low Type Interceptor
(20, 35, 50 GPM) Fig. No. 8165
– Low Profile Grease+Gard™ GRD
• Fig. No. 8175 (20, 25, 35, 50 GPM)
• Fig. No. 8176 Low Type Interceptor
(20, 35, 50 GPM) Fig. No. 8175

7. • Retrofit
• Fig. No. 8165GG - Grease+Gard™
Retrofit Skimmer
Fig. No. 8165GG
• Fig. No. 8175GG – Low Type
Grease+Gard™ Retrofit Skimmer
Fig. No. 8175GG

8. • Indirect Solids
Interceptor, Fig. No. 8960
• Inline Solids
Interceptor, Fig. No. 8980

9. • Belt technology along with a heater and timer
• The belt cycles through the grease layer
• Grease sticks to the belt
• The skimmer blades wipe the grease off the
belt Fig. No. 8165
• The grease goes off the skimmer blades and
into the grease trough
• The grease trough feeds the grease into the
grease bucket where the grease is collected
and removed daily to a barrel for proper
disposal
Fig. No. 8175

10. • Patent pending technology
• Helps circulate the top
grease layer
• Aids in drawing the grease
to the belt
• Reduces having to stir the
contents of the interceptor

12. • This GRD model can be used on most in
floor and above floor interceptor
applications.
• The tower is 13” high from the interceptor
cover.
• Can add an extension to in ground
applications if needed.
• Available in 20, 25, 35 and 50 GPM.

13. Regularly Furnished: Automatic Grease Recovery Device (GRD) with Type 304
Stainless steel Interceptor, No-Hub Connections, Flow Control Fitting, Heater and
Grease+Gard™ Skimmer with Grease Reservoir.

14. • This model is designed to fit into tight
spaces where there are clearance issues.
• It is designed for above floor installations
only.
• The tower is 7” high from the interceptor
cover.
• Available in 20, 25,35 and 50 GPM.

15. Regularly Furnished: Automatic Grease Recovery Device (GRD) with Low Profile
Grease+Gard™ Skimmer and Grease Reservoir, Heater, Type 304 Stainless Steel
Interceptor with No-Hub Connections and Flow Control Fitting.

16. • Retrofit on existing grease
interceptor cover.
• This model can be used on most in-floor and
some above floor interceptor applications.
• The tower is 13” high.
• Requires a square cut out of the top of
the interceptor for installation.

17. Regularly Furnished: Stainless Steel Housing, Adjustable Timer, Skimming Belt, Mounting
Base with Gasket, Heater and Removable Grease Reservoir.

18. • Retrofit on existing grease
interceptor cover.
• This model is designed to fit into tight spaces
where there are clearance issues.
• The tower is 7” high.
• Requires a cut out of the top of the
interceptor for installation.

19. Regularly Furnished: Low Profile Stainless Steel Housing, Adjustable Timer, Skimming
Belt, Mounting Plate with Gasket, Heater and Removable Grease Reservoir.

20. • Inline and indirect solid interceptor assemblies to
be installed at the solids source.
• Primary and secondary straining systems in each
system. Any solids due to erosion that pass the
primary screen and sink to the bottom of the sump
will be captured and removed by the filter bag.
• Patent Pending.
• Future capabilities of being semi automatic.

21. Regularly Furnished: Fabricated Type 304 Stainless Steel Body with Adjustable
Legs, Perforated Bottom Bucket and Secondary Poly Mesh Strainer.

22. Regularly Furnished: Fabricated Type 304 Stainless Steel Body with Adjustable
Legs, Perforated Bottom Bucket, Secondary Poly Mesh Strainer and Secured Cover.

24. Commercial Kitchen and Food Processing Applications
• Restaurants
• Grocery/Convenience Stores
• Churches
• Casinos
• School Cafeterias
• Correctional Facilities
• Retirement Homes
• Mall Food Courts
• Airport Eateries
• Sports Arenas

25. • IAPMO listed as a GRD for territories using the
Uniform Plumbing Code (UPC).
• This IAPMO listing of our GRD’s is for both new
installations and retrofit installations on other
manufacturers’ Interceptors.
• The 8165GG and 8175GG are IAPMO listed
through the MC (Material and Component) listing
program.
• PDI Certified.
• Tested and approved to the National Consensus
Standards ASME A112.14.3 and A112.14.4 –
Grease Removal Devices.

26. • Smith now has the broadest product line of Grease and
Solids Interceptors in the entire industry = more
opportunities to close a sale to fit everyone’s budget or
configurations.
• Grease+Gard™ Retrofit Skimmer (patent pending) is the only retrofit
device for GRD applications on the market today.
• Grease+Gard™ Retrofit Skimmer can be installed on most
interceptors saving thousands in interceptor replacement costs.
• The Retrofit Skimmers (8165GG and 8175GG) are less
expensive alternatives to grease recovery devices.
• Approved, efficient and simple solutions for different applications.