1. BHAVINKUMAR SHASHIKANT TAILOR
INSTRUMANTATION TECHNITIAN
CARRIER OBJECTIVE:-
Aim to learn and gain practical knowledge that can be further utilized for the
achieving the organization’s goal. Seeking a challenging position to use my attentive and
good analytical skills.
Highly motivated and goal oriented professional seeking an opportunity to
contribute abilities and knowledge for personal as well as professional growth. Ready
to accept the challenges and contribute in the productivity of an organization.
SUMMARY:-
Total 10 Years of Experience (Abroad 4 Years, India 6 Years):- Well
Experience in Modern Process Control Instrumentation of Refinery, Petrochemical and
Chemical industries in India and abroad. Well Experience in PTW, SMP, SOP and Safety
Procedures. Involved in Maintenance, shutdown, Commissioning and Start up activities.
Well Experience in fault finding, troubleshooting and startup of process control equipment
related to instrument in Process Plant. Worked in different type of activities related to
Commissioning is Loop checking and Trouble Shooting, related to Maintenance is
calibration, repair and Maintenance of varies kinds of instruments. Well experience in
compressor Instruments such as Bentley Nevada Probe & Proximity and Vibration
monitoring system program. Good knowledge in DCS such as ABB ABB800XA,
Yokogawa centum 3000 and Emerson Delta-V.
TECHNICAL QUALIFICATION:-
Education CLASS / YEAR University
Diploma In Instrument & Control A Grade / 2008
Institute Of Business
Management & Engineering
ITI In Instrument Mechanic 1st Class / 2004
Industrial Training Institute
Surat, India
Higher Secondary Certificate 2nd Class / 2004 GSEB / Surat India
ABROAD EXPERIENCE:-
Organization Employment of Period Position
Oman Formaldehyde
Chemical Co. Ltd (Oman)
Oman Formaldehyde
Chemical Co. Ltd (Oman)
2nd February,
2014 to till date
Instrument
Technician
Qatar petroleum (Qatar)
Black Cat Engineering &
Construction Co.
Project
Instrument
Technician
Saudi Kayan
Petrochemical Co. (Saudi
Arabia)
JAL International Ltd.
2 Years
Maintenance
Instrument
Technician
INDIA EXPERIENCE:-
Organization Employment of Period Position
Reliance Industries Ltd.
Surat, India
Hofincons Info Tech &
Industrial Service P. Ltd
5.4 Years
Maintenance
Instrument
Technician
Reliance Industries Ltd. &
ONGC Ltd, Surat, India
Flotomatic Engineering
Pvt. Ltd
1 Year
Maintenance
Instrument
Technician

2. TRAINING:-
Instrument Devices & System Program 1 Day
Certificate of Appreciation In Commissioning & Strat-up Activity -
Certificate of Training for Boiler Feed Water System 1 Day
H2S Awareness & Confined Space Work Permit Awareness 1 Day
COMPUTER PROFICIENCY:-
 Familiar with DOS & Windows operating system, Ms-Office, Photoshop, internet.
PROFESSIONAL EXPERIENCE:-
Employer : Oman Formaldehyde Chemical Company, Oman.
Designation : Instrument Technician
Duration : February 2014 to till date.
 Daily Permit Preparation for Schedule and Un-schedule job.
 Responsible for all emergency jobs.
 Daily activity such as Preventive maintenance, Routine maintenance and
troubleshooting activities.
 Individual work in shift duty.
 Responsible for calibration, repairing, overhauling and troubleshooting of various
field Instruments.
 Responsibilities to lead instrument team during shutdown activities.
 Maintenance and Calibration of Analyzer such as Oxygen and PH.
 Familiar with DCS of DCS 3000 YOKOGAWA and ABB800XA.
 Good touch in commissioning and maintenance activity for CCTV.
Employer : JAL INTERNATIONAL COMPANY LIMITED.
Positioned at : Saudi Kayan Petrochemical Company Saudi Arabia
Designation : Instrument Technician
Duration : November 2008 to November 2010
 Involved in preparation of SMP for Instrumentation.
 Authorized permit holder.
 Preparing Loop drawing, loop details, wiring details and Hook up drawing.
 Responsible for installation, calibration, repairing, overhauling and troubleshooting
of instruments.
 Carrying out commissioning activities like loop checking, sequence and logic
checking of the newly added facilities and package units.
 Involved in commissioning activities for Atlas Cop. Co. compressor and Elliot make
Turbine.
 Commissioning & Maintenance activities for Bentley Nevada vibration monitoring
system such as 3500 vibration probe and proximitters.
 Commissioning & Maintenance activities for Burner Management System of
Thermax and IHI make boiler.
 Performing daily activity such as Preventive maintenance, Routine maintenance
and troubleshooting activities
 Responsible for all work related to DCS (Yokogawa CS 3000).
 Got training for Yokogawa DCS and Triconics PLC Program.

3. Employer : Hofincons InfoTech & Industrial Services Ltd.
Positioned at : Reliance Industries Ltd. Surat, India
Designation : Instrument Technician
Duration : August 2005 to November 2008
January 2011 to June 2011
April 2012 to January 2014
 Daily activity such as Preventive maintenance, Routine maintenance and
troubleshooting activities.
 Individual work in shift duty.
 Responsible for calibration, repairing, overhauling and troubleshooting of various
field Instruments.
 Overhauling and calibration of various Control Valves with Pneumatic & DVC-6000
Positioner.
 Carry out cross wiring and inter panel wiring in the control room panels for signal
marshalling, Relay logic, DCS, Operator control Desk.
 Handle all responsibilities to lead instrument team during shutdown activities,
Routine jobs and preventive maintenance activities of Instruments.
 Familiar with DCS of DCS 3000 YOKOGAWA and ABB800XA.
 Maintenance and Calibration of Oxygen Analyzer make Rosemount and PH meter
make Yokogawa.
 Maintenance experiance of thermax make furnace based on BMS
 Familiarity in FS Elliot make Compressors and TRANE make Chillers.
 Familiar with SCANDURA 8500 Panel for calibration & checking of Instrument &
also work on SCANDURA make B-20 field instrument portable calibrator.
 Weight measurement instrument Calibration & Maintenance Load Cell checking.
Employer : ALMEER TECHNICAL SERVICES CO.W.L.L. Kuwait
Positioned at : KNPC & Shuiba, Kuwait
Designation : Instrument Technician
Duration : January 2012 to March 2012
 Shutdown activities like Replacement Pneumatic Instruments to Smart Instrument
like Smarts DP Type Transmitter make Foxboro, Yokogawa, Rosemount and
Honeywell.
 Shutdown activities like instrument removing, calibration and install back of field
instrument.
 Involved in control valve stock checked and calibration.
 Shutdown activity for calibration of level trolls (Masoneilan).
 Loop checking, sequence and logic checking of the newly added facilities and
package units.
Employer : Black-Cat Engineering & Construction P. Ltd
Positioned at : Qatar Petroleum, Qatar
Designation : Instrument Technician
Duration : July 2011 to October 2011
 Commissioning activity like Calibration of all kind of Instrument and Installation as
per hook up diagram.
 Involved in Preparing wiring diagram and wiring job in panel as per wiring diagram.
 Involved in Loop checking for all instrument Input and output.
 Responsibility for making punch of Instrument Systems.

4. PROFESSIONAL SKILLS:-
 Having good knowledge of plant safety rules & regulations.
 Good knowledge about Permit to work systems (PTW) and several kinds of permits
like Cold work permit, hot work permit, Limited Space Entry permits.
 Able to do a job independently in Normal & Silent hours.
 Well-known with the Plant Running, Predictive, Preventive, Breakdown and
Corrective Maintenance.
 Installation, Calibration, Configuration, Preventive & corrective maintenance of
various types of Analog & Smart transmitter for the measurement of flow, pressure,
different pressure, level and temperature.
 Installation, overhauling, Calibration & troubleshooting of Control valve and
positioner. Repairing & calibration of control valve accessories of many products
like I/P converter, setting of air lock relay, volume booster, limit switches, air filter
regulator, solenoid valves etc.
 Calibration and maintenance of Oxygen, PH Meter.
 Maintenance and calibration Micro-motion Mass Flow Meters.
 Familiar with GWR (Guide wave Radar) type instruments.
 Familiar with Scandura and Druck calibrator for calibration & checking of
Instrument in work shop and field.
 Loop checking and commissioning of field Instruments.
 Preparing of Loop drawing, Hook-up drawing, and P&ID drawings.
 Extensive troubleshooting experience for all fields instruments during loop check,
start-up and commissioning activities.
 Carried out shut down jobs, Trouble shooting & start up activities.
 SYSTEMS FAMILIER:
o Familiar with HART Communicator. (Model: 475,375,268,275)
o Vibration Monitoring System BENTLY NEVADA-3300, 3500 series.
PERSONAL DATA:-
Name : Mr. Bhavinkumar Tailor
Father’s Name : Mr. Shashikant Tailor
Date of Birth : 23rd February 1987
Nationality : Indian
Passport No : G-0790254
Date of issue & valid up : 27th February 2007 / 26th February 2017
Permanent Address : B-11/12, Rang Avdhut soc.-1, Opp-Rupali Cinema,
Rander road, Surat-395005, Gujarat, India.
Mobile No : +968 95526609
Marital Status : Married
Languages Known : English, Hindi, and Gujarati.
PERSONAL ATTRIBUTES:-
 Keenness to myself as asset for the organization of which I shall be the part.
 Honest, Hard Working & Self-Motivated, Creative.
 Working well as Team Member or Independent.
Bhavin S. Tailor
bhavin_2302@yahoo.co.in
+968 95526609