This document provides an overview of a course on joint terminal attack control (JTAC). The course introduces students to the role of the JTAC and the fundamentals of close air support (CAS). It explains that JTACs are trained to control fixed-wing and rotary aircraft to provide safe and effective fire support for ground forces. The course covers key JTAC concepts like the 9-line CAS briefing format and controlling CAS through the three phases of planning, preparation, and execution. Students will practice with special equipment and complete a scenario controlling CAS to support ground troops under fire.
It's an army version...as it was made by me for my dad :) I have a word report too...for that or any queries regarding this topic contact me on alizamalik01@gmail.com....Gud luck!
In the Second Line of Defense visit to Fallon Naval Air Station in October 2014, we had a chance to interview Admiral Scott Conn, the head of Fallon. In this brief the Admiral explains the basic structure and approach of the Command to training 21st Century Naval Air Forces.
Abstract AAV or EFV - Amphibious Tracked Vehicle 35-65 t for US Marine Corps ...Andrey F Engineer
Preliminary design of the Assault Amphibious Vehicle (Infantry Fighting Vehicle) 35-65 t and possible vehicles of this family. Requirements (Based on Department of the Navy, United States Marine Corps), Description, Specifications.
This is a report on ‘drones-an introduction&design’.In this
report I tried to give an introduction about drones or unmanned
aerial vehicles (UAVs) and some preliminary design parameters.
Introduction portion consists of drone history, technology, uses,
and the current generation of drones. Design portion includes
parameters like aerodynamics, payload, endurance, speed and
range, navigation systems and communications.
We have returned to Fallon this summer and found the training command in the process of promoting significant change associated with preparation for the evolution of high tempo or high intensity combat operations.
In our interview with the head of NAWDC., Admiral “Hi Fi” Harris, the focus and way ahead is the focus of attention.
http://www.sldinfo.com/nawdc-and-shaping-a-21st-century-combat-force-the-perspective-of-admiral-hyfi-harris/
It's an army version...as it was made by me for my dad :) I have a word report too...for that or any queries regarding this topic contact me on alizamalik01@gmail.com....Gud luck!
In the Second Line of Defense visit to Fallon Naval Air Station in October 2014, we had a chance to interview Admiral Scott Conn, the head of Fallon. In this brief the Admiral explains the basic structure and approach of the Command to training 21st Century Naval Air Forces.
Abstract AAV or EFV - Amphibious Tracked Vehicle 35-65 t for US Marine Corps ...Andrey F Engineer
Preliminary design of the Assault Amphibious Vehicle (Infantry Fighting Vehicle) 35-65 t and possible vehicles of this family. Requirements (Based on Department of the Navy, United States Marine Corps), Description, Specifications.
This is a report on ‘drones-an introduction&design’.In this
report I tried to give an introduction about drones or unmanned
aerial vehicles (UAVs) and some preliminary design parameters.
Introduction portion consists of drone history, technology, uses,
and the current generation of drones. Design portion includes
parameters like aerodynamics, payload, endurance, speed and
range, navigation systems and communications.
We have returned to Fallon this summer and found the training command in the process of promoting significant change associated with preparation for the evolution of high tempo or high intensity combat operations.
In our interview with the head of NAWDC., Admiral “Hi Fi” Harris, the focus and way ahead is the focus of attention.
http://www.sldinfo.com/nawdc-and-shaping-a-21st-century-combat-force-the-perspective-of-admiral-hyfi-harris/
Regulating airworthiness & spaceworthiness of future suborbital vehicles (pre...Dr Andy Quinn
An alternative approach for regulating suborbital space vehicles to (that of COMSTAC and the FAA-AST) - we have 50 years of manned spaceflight and 60 years of aviation to learn from.....
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
1. Requirements:
● UO familiarization course or equivalent
● Ability to use the ACRE radios
● Map reading ability, including 8 digit grids, reading contour lines and recognizing terrain
features
● A working game, I am not going to play tech support.
● Ability to ask questions when confused
Introduction and Fundamentals of Joint
Terminal Attack Control
Start Recording...
Welcome (5-7 mins)
● What is this course?
○ By the end of this course you will be able to control fixed and rotary wing aircraft
in game so that they provide safe, effective fire upon enemy positions. You will
be able to properly help your team utilize the full potential of an attack aircraft.
Most players do not know how to properly control an attacking aircraft in a
forward area - this tends in air missions which are ineffective, slow to arrive and
often contain an elevated risk of fratricide.
● Introduction re: Chris Krause
○ Do not have military experience
○ I do not claim to be an expert on this topic, only a amateur and academic
○ Most of the information in this course is based upon my experience reading field
manuals and studying fully modeled flight simulators. I have a list of resources
from which I based my knowledge which I can make available to you.
● You can and should ask questions
● Native english speaker.
● This is a small class, so we have time for questions.
● If you don’t understand something you must ask for clarification
○ Not understanding = killing friendlies with assets or not being effective
● If you want anything in particular covered that is not on the syllabus, I am open to
suggestions
● The course contents are as follows:
○ First: a brief introduction to close air support, definitions, what you should be able
to do by the end of this course, special equipment, procedures for the execution
of close air support requests.
○ Two: Practice with special equipment, map tools and CAS requests.
○ Third: A practical segment which you must complete before I will endorse you
2. as having taken this course. The practical is a scenario in which a “Tactical air
control party” must stop a Russian mechanized wave attack on a friendly AI force
of light infantry. If you don’t support them, they will die. You will use your new
skills as a joint terminal attack controller, or JTAC, to accomplish this.
○ Fourth: A debrief, in which I will cover any topics you are interested in, will take
feedback from you and conclude the course.
○ This course should run about 3 hours.
3. ● This course will only cover the fundamentals of joint terminal attack control - it is outside
the scope of our time frame to teach you everything. If you take anything away from this
class hopefully it will be an understanding of what a type 1, type 2, type 3 CAS request
are - how to do a 9 line and how to use special equipment of the JTAC. If you have that
roughed out, the rest will come with practice or study and you’ll be more proficient in this
than the vast majority of the players here.
● One note: this course covers air control as it applies to the US armed forces, in particular
the army. Some notes will be offered on Marine corps and NATO cooperation.
What is the JTAC? (10 mins)
1. This term gets thrown around a lot
2. It’s the guy who controls and “calls in” attack aircraft, explain typical presence in
missions nowadays
3. What is a JTAC in reality?
○ JTAC = Joint terminal attack controller
○ Extension of the historical army forward observer. But JTAC has a much more
rigorous and in-depth training. JTACs are either army or air force personnel.
○ The JTAC MOS only became active in the US military in 2003.
○ They typically function in two formations:
■ tactical air control parties: The TACP is the principal Air Force liaison
unit collocated with Army maneuver units from BN through corps. It
consists of two JTACs, a forward observer and a air force liaison officer.
The TACP has two primary missions: advise ground commanders on
the capabilities and limitations of air operations, and provide the primary
terminal attack control of CAS. TACPs coordinate air combat missions
and deconflict the aircraft with Army fire support. TACPs are organized
into expeditionary air support operations groups or squadrons that are
aligned with their respective Army corps, division, or brigade HQ. TACPs
may employ JTACs at the company/team level.
■ terminal attack control teams which are two man teams consisting of a
JTAC and a JTAC apprentice.
○ The marine corps does not have JTAC in name, although their forward observers
are certified as JTACs.
○ The official definition of a JTAC is as follows:
■ The JTAC is the forward Army ground commander’s qualified (certified)
Service member, who, from a forward position, directs the action of
combat aircraft engaged in CAS and other air operations in the ground
commander’s operational area. JTACs provide the ground commander
recommendations on the use of CAS and its integration with ground
maneuver. The JTAC must:
● Know the enemy situation and location of friendly units.
● Know the supported commander’s target priority, desired effects
and timing of fires.
● Know the commanders intent and applicable ROE.
● Validate targets of opportunity.
● Advise the commander on proper employment of air assets.
4. ● Submit immediate requests for CAS.
● Control CAS with supported commander’s approval.
● Deconflict aircraft and fires from CAS sorties.
● Provide initial BDA report.
5. 4. The JTAC knows how to conceal himself, conduct observation, call in close air support
safely and without error. It is difficult or impossible to do close air support properly
without a proficient joint terminal attack controller.
5. Does anyone not understand what the JTAC is, or what he does?
Close Air Support (30 minutes)
● Close air support (CAS) is air action by fixed-wing and rotary-wing aircraft against hostile
targets that are in close proximity to friendly forces, and requires detailed integration of
each air mission with the fire and movement of those forces.
● The JTAC directs CAS.
● CAS is implemented in three phases [GO OVER NAMES FIRST, THEN READ
DESCRIPTION].
○ Planning
■ Receipt of mission: Read the briefing.
■ Mission analysis
● Understand higher’s fire support plan: you may need to call in
artillery to mark a target, you will need to deconflict your aircraft
from other fire support assets
● Understand air threats - ranging from heavy machine guns, to
man portable surface to air missiles, to anti-aircraft artillery and
fully developed SAM systems.
● Understand the commander’s intent, maneuver plan and the
approximate location of friendly forces at all stages of the
operation
● Understand restrictions, taskings, and capabilities of CAS aircraft
● High value targets
● Rules of engagement
● Command and signals
■ Course of action development/analysis
● Develop a plan to employ CAS to achieve the commander’s intent
and the tactical realities.
● Designate OPs for JTAC
● Integrate triggers with maneuver. - i.e. restrictions on CAS
dependant on the movement of friendly force
● Movement plan for the TACP or TACT
● Allocate fire support assets
● Designate restricted air space etc
● Aircraft/pilot abilities, limitations and operating abilities
● Air threat posture analysis
■ Orders production
● Commander approves plan for CAS.
○ Preparation
■ Movement
6. ● Move to OPs
● Execute maneuver plan.
■ Observation
● Observe targets
● Observe areas of interest
○ Execution
■ Execution
● Track friendly units
● Observe triggers
● Scan for air threats and enemy movements
● Deconflict/coordination fires
○ http://www.krauselabs.net/dump/deconfliction.png
● Execute CAS requests on targets of opportunity
○ Reality vs game: in reality you would be working with a
tactical operations center, in game you have free reign to
call in CAS without considering theatre-wide demands and
developments
○ Determine type of control needed
○ Once the CAS is on station:
■ Aircraft check in
■ CAS briefing (9 line)
■ CAS attack
● Depart initial point
● Mark targets
● Confirm target/marks
● Weapon release request
● Weapon cleared hot
● Weapons release
■ Assessment
● BDA/assessment
● Further tasking
○ Re-attack
○ Return to initial point or battle position
○ Depart
○ We are going to briefly go over all of this, because if any of these steps are
missing from close air support deployment, problems can result.
7. ● CONDITIONS FOR EFFECTIVE CLOSE AIR SUPPORT
○ EFFECTIVE TRAINING AND PROFICIENCY
■ Both pilots and JTAC need to have a basic ability to understand the
nuances of close air support (as outlined above)
○ PLANNING AND INTEGRATION
■ If you don’t plan what you are doing with moving friendly forces, you will
kill them.
○ COMMAND AND CONTROL
■ Can you contact and control the aircraft?
○ AIR SUPERIORITY
■ CAS in an area contested by enemy aircraft is dangerous and ineffective.
○ TARGET MARKING
■ If you mark a target, and the pilot is able to contact the mark - fratricide is
reduced and effect is increased
○ STREAMLINED AND FLEXIBLE PROCEDURES
■ In ARMA 2 terms, this refers to the freedom of the TACP/TACT to
move away from the main body of the friendly forces and to conduct
observation. IN addition, it involves that both the observer and the
weapon operator are on the same page.
○ APPROPRIATE ORDNANCE
■ Some weapons won’t do the job, some weapons may endanger friendly
forces.
○ FAVORABLE ENVIRONMENTAL CONDITIONS
■ Don’t do CAS on a mission with less than a 3000 meter visibility. In reality
CAS never flies when there are sand storms or blizzards.
● We could spend hours on each one of the phases of CAS, so let’s break down into an
ultra minimal form so you guys understand the basics:
○ Planning: Read the mission briefing, copy and understand what aircraft will be
available, what can shoot them down, the enemy threat and how you will use
your aircraft to destroy that threat or otherwise achieve the commander’s intent.
Give aircraft initial orders: get airborne and come on station at IP ford. Determine
where you will be during the mission, make sure you can observe friendly
movement and enemy forces. Get confirmation from the commander.
○ Preparation: In game now, you will establish coms with your aircraft, get an
ordnance check, confirm they are inbound, set up your radios and begin
movement to an observation post. In more complex missions, this would also
involve rehearsals and practice.
○ Execution: You will observe for targets and send CAS requests to the aircraft
until the mission end state. You will ensure aircraft do not fly into artillery. You will
use artillery to support the employment of aircraft, which usually means a white
phosphorous fire mission to mark targets.
Questions? We just went over a lot of shit there.
8. CAS Briefing (30 minutes)
So you have gone out away from the company and set up at an OP. Suddenly you spot
a contact or a request for CAS from another unit comes up on the net. You need to
control attack aircraft onto the enemy.
3 types of CAS mission control are possible: type 1, type 2 and type 3.
Type 1:
“A laser guided GBU attack on trenchline of infantry, observed by the JTAC”
Type 1 control is used when the JTAC must visually acquire the attacking aircraft and the
target for each attack. Analysis of attacking aircraft geometry is required to reduce the risk
of the attack affecting friendly forces. Type 1 control is used when the visual acquisition of
the attacking aircraft by the JTAC and the analysis of attacking aircraft geometry is the best
means available to reduce risk of the attack affecting friendly forces. Language barriers when
controlling coalition aircraft, lack of confidence in a particular platform, ability to operate in
adverse weather, or aircrew capability are all examples where visual means of TAC may be the
method of choice. Due to the use of visual cues to mitigate risk under Type 1 control, JTACs
should not change the type of control to Type 2 or Type 3 after the CAS attack briefing has been
given to CAS aircraft. Type 1 control procedures are as follows:
● JTAC must visually identify the target.
● JTAC will send a 9 line cas briefing to the aircraft.
● Attack aircraft will verify target location correlates with expected target area.
● Aircraft will read back Line 4, Line 6, and any restrictions provided by the JTAC.
● JTAC will provide a verbal description or talk-on to the mark and/or target and confirm
aircraft correctly identifies the mark and/or target.
● Aircraft will provide an “IP INBOUND” call if requested.
● JTAC will mark/designate target (as practicable).
● Attack aircraft will provide “IN” call indicating entering terminal phase of air-to-ground
attack prior to weapons release.
● Attack aircraft will visually acquire target or mark.
● JTAC will visually acquire the attacking aircraft.
● JTAC will analyze attacking aircraft geometry to reduce the risk of the attack affecting
friendly forces.
● JTAC will provide a “CLEARED HOT” or “ABORT” based on the above procedures being
met.
What is the anatomy of a CAS briefing?
http://www.krauselabs.net/dump/9line.png
1. IP/BP: initial point/battle position. IP for fixed wing aircraft, BP for rotary wing. This is where
9. the aircraft starts it’s attack run from. It should be lined up to the target along the heading.
2. Heading: In magnetic or mils. You measure this using your map tools, although in a rush
you can just take a cardinal direction and convert it into magnetic. If “left” or “right” follows the
heading, an offset direction is designated. The offset direction tells the aircrew on which side
of the IP-to-target line they can maneuver for the attack. JTACs use an offset direction to ease
fire support coordination, align the aircraft for the attack or egress, or keep aircrews away from
known threats. The offset direction regulates the attack quadrant without assigning a specific
attack heading. http://www.krauselabs.net/dump/offsetdirection.png
3. Distance: Distance from IP to target in meters.
4. Elevation: Self-explanatory.
5. Target description: Describe the target in a simple few words. examples: “a column of t-90
tanks on a road” “infantry in the open” “infantry in buildings” “BMP3 vehicles in the tree line” “a
bunker”
6. Target location: the GRID of the target, 8 or 10 digit for precision strikes using dumb
ordnance, 6 digit for most requests.
7. Type mark: How you are marking the target. Can be WP, laser (followed by the code
number), talk-on, IR etc
8. Location of friendlies: distance in meters + cardinal direction from the front line trace of
friendly troops. “north 1000 green smoke”
9. Egress: Where the aircraft goes after the attack is complete. Usually an IP or a BP, but can
be a direction, “east.”
Remarks: This is an EXTREMELY important part of the CAS request. Here you are going to
tell the aircraft remarks (special features of the CAS mission) and restrictions (conditions that
it must observe in order to execute the mission). All restrictions must be read back from the
aircraft during the readback phase of the briefing.
Common Remarks:
1. Desired type/number of ordnance and/or weapons effects. “Use times 2 AGM 65-d”
2. Threat, location, and type of suppression (if any). “ZSU-23 North 1000”
3. Hazards to aviation.
4. Weather.
5. Additional target information.
6. Other time considerations.
7. Friendly mark (if any). “Friendlies marked green smoke”
Common restrictions:
1. Final attack heading. “Final attack heading X” or “Final attack heading x-x” where x are
degrees magnetic or cardinal directions. Final attack heading is a restriction often used for gun
or rocket runs which limits the attack heading on the target. This is often done to deconflict fires
from the aircraft with nearby friendly ground troops or to keep the aircraft at distance from a
nearby air threat. When it is given as a range, it is a cone or sector of fire that is acceptable.
10. 2. Geographical references “Make all
attacks parallel to the road.” “Make all attacks above northing 61” “Restrict all fires on the west
side of hill 48”
3. Danger close - if the target is close enough to friendlies to endanger them. In reality the range
is different per the weapon. In ARMA you might just want to use 600-800 meters.
4. TOT - time on target. This is how play “playtime” the aircraft has. Useful in type 3 requests
or for especially dangerous missions, or used to deconflict with other fires or aircraft. Reported
as “TOT 45-55” which means 45-55 of the current hour. i.e. if its 1240 right now, and a TOT of
45-55 is supplied, this means the aircraft should be attacking between 1245-1255.
5. Altitude “Stay above 3000 ASL”
No Nos
1. Saying “line x” before each line
2. Saying “break” after each line - the aircraft is already copying what you are saying and no one
else is going to be on your net
3. Saying the description of each line before sending it - the point of a 9 line is to be speedy
method of transmitting complex information, don’t slow it down.
4. Do not abbreviate numbers - 1900 is not “nineteen hundred” it is “one, niner, zero, zero”
Type 1 request:
http://www.krauselabs.net/dump/type1.png
Type 2:
“A precision strike on an unmarked t-80 that is not observed by the JTAC”
Type 2 control is used when the JTAC requires control of individual attacks and any or all of the
conditions highlighted as follow exist:
● JTAC is unable to visually acquire the attacking aircraft at weapons release.
● JTAC is unable to visually acquire the target.
● The attacking aircraft is unable to acquire the mark/target prior to weapons release.
● Same procedure as type 1.
The following must be kept in mind:
● When employing unguided munitions using Type 2 control, consideration must be given
to host aircraft navigation/weapons system accuracy. Inaccurate navigation/weapon
systems can result in excessive miss distances.
11. ● Weapon time of flight will be a factor relative to movement of enemy targets and friendly
forces when employing standoff weapons. Detailed planning and preparation by both the
joint terminal attack controller/forward air controller (air) and the aircrew are required to
identify situations and locations conducive to standoff weapons attacks, and to address
flight profile and deconfliction (aircraft/weaponry/terrain) considerations.
Type 2 request:
http://www.krauselabs.net/dump/type2.png
Type 3:
“An engagement on a column of tanks moving along a road out of sight of the JTAC”
Type 3 control is used when the JTAC requires the ability to provide clearance for multiple
attacks within a single engagement subject to specific attack restrictions, and any or all of the
conditions highlighted as follows exist:
● JTAC is unable to visually acquire the attacking aircraft at weapons release.
● JTAC is unable to visually acquire the target.
● The attacking aircraft is unable to acquire the mark/target prior to weapons release.
● Different procedure than type 1 or 2. Type 3 is an engagement of an area under
restrictions, type 1 and 2 are attacks on individual point targets.
○ A “CLEARED TO ENGAGE” call is made by the JTAC preceding IP inbound.
○ A “COMMENCING ENGAGEMENT” call is made by the aircraft after the IP
○ A “ENGAGEMENT COMPLETE” call is made by the aircraft once it is off the
target
Type 3 request:
http://www.krauselabs.net/dump/type3.png
Quiz (5 minutes)
Select random people:
1. When would you use a type 1 CAS request?
Answer: When you can see the target.
2. … type 2
Answer: When you can’t see the target and want to attack a point target.
3. … type 3
Answer: When you can’t see the target and want to define an engagement area
4. What is special about type 1 versus type 2 or 3?
Answer: In type 1 you MUST see the target
5. What are remarks?
Answer: Details of the CAS mission
12. 6. What are restrictions?
Answer: Conditions that the aircraft MUST observe in order to execute the mission
7. To pilot: What is included in a readback?
Answer: Lines 4-6 and any restrictions
8. When can you change the type of control during a CAS mission?
Answer: You can’t. Once a type of control is selected, do not change it.
9. What does a “left” or “right” after the heading magnetic indicate?
Answer: Offset direction
10. How do you speak each line of the 9 line?
Answer: Without breaks, line numbers or descriptors
11. What is a final attack heading and what is it used for?
Answer: Restricts a cone of fire to the aircraft, useful for guns and rockets
12. How does a type 3 engagement differ from type 2 and 1 in procedure?
Answer: Engagement terminology, on previous page.
13. What is the significance of the planning phase of CAS?
14. … the preparation phase?
15. … the execution phase?
16. What are some factors or conditions needed for effective CAS?
Practical Procedure (5-7 minutes)
● Type 2 and 3 would occur when you do not have eyes on the target but you want to hit it
or another observer is requesting a CAS request through your net.
● Type 1 occurs when you spot an enemy target.
○ Spot the target.
■ Will you be able to predict its movement or will it remain stationary long
enough for an aircraft that is already loitering to be effective against it,
following a briefing? (3-5 minutes out)
■ Is it in a position which allows close air support? If it is right on top of
friendlies, this is a no no.
○ Assess the terrain.
○ Assess enemy air threats.
■ For example: if a shilka is to the south, make note of this to include in the
remarks. Furthermore, if the aircraft is ingressing east to west, you can
set an offset direction of right to steer it clear of the shilka’s effective max
range.
○ Copy the grid/elevation of the target. This is most easily acquired by a SOFLAM
or Vector 2 nite connected to a DAGR - but you also need to have map reading
skills when equipment is unreliable or unavailable.
○ Designate an IP based off of terrain and air threat analysis. You will need to
imagine the aircraft flying in, from his perspective. Make sure you do not make
impossible angles, and give the aircraft ample altitude to deconflict with terrain
features.
○ Use the map tools to determine a heading from the IP to the target, copy this
down.
○ If you have marking equipment, get it ready, otherwise get artillery on a separate
net to mark the target and conduct a fire mission.
○ Consider the ordnance and capabilities of the CAS aircraft against the target.
A gun run against a Tunguska would be a suicide mission, while a stand off
engagement using AGM-65 “maverick” might be a more logical choice.
13. ○ Call the aircraft:
■ “Slayer 1 this is deathstar 1, type 1 in effect, advise when ready for 9 line”
■ “Slayer 1 ready to copy”
■ Deathstar 1 supplies (9 line)
■ “Deathstar 1 Advise when ready to copy remarks”
■ “Slayer 1 Ready to copy remarks”
■ Deathstar 1 supplies (Remarks/restrictions)
■ Readback lines 4 and 6, and any restrictions “Slayer 1, 270 right, 1354
0421, engage west of the river only”
■ “Deathstar 1, readback correct, report IP inbound” (report when you are at
the IP)
■ “Slayer 1, IP inbound” (I am at the IP)
■ “Deathstar 1, continue” (Authorized to proceed with the attack profile,
but you may not release any ordnance yet. Used to acknowledge aircraft
without providing clearance)
■ “Deathstar 1, mark is on the deck” (mark is now in effect)
■ “Slayer 1, contact the mark” (i see your mark)
■ “Deathstar 1, cleared hot” (you may release ordnance)
■ “Slayer 1, in from the east” (im attacking from the east)
■ “Slayer 1, off” (im egressing)
○ BDA/Re-attack/Abort
■ “From hits, west 100” (re-attack the target west 100 meters)
■ “ABORT ABORT ABORT” (tells the aircraft to stop whatever its doing and
return to IP, usually done when it is about to attack friendlies, is off target
or is going to endanger itself)
Special Mark: Talk-On (5 minutes)
If you supply line 7 of a 9 line as “talk-on” then you explain what the pilot will see from the IP as
he flies, guiding him onto the target by use of visual references. This is a very useful way to help
the pilot attack the target if the terrain is complex or if marking is impossible. A talk-on can also
be done by a remote observer, although the CAS mission is always controlled by the JTAC, as
we see in the type 3 example:
[reference type 3 pic]
Quiz (5 minutes)
Select random people:
1. What information do we need before we call the aircraft for CAS?
2. What do we tell the pilot after he is at the IP?
3. What does “continue” mean?
4. When can an aircraft release ordnance?
5. When do you mark the target?
6. What is a scenario in which a talk-on would be useful?
7. How do you tell an aircraft to stop the attack?
8. How do you tell the aircraft to re-attack?
14. How to copy and execute CAS requests as a pilot (10
minutes)
● We have gone over the procedure from the JTAC’s perspective. You all know what goes
into preparation, planning and execution of CAS. Understanding this is key for pilots,
which is why we have pilots in this class.
● Now we’re gonna go briefly over the pilot’s place in close air support.
● The first thing you’re going to do when operating a CAS aircraft is to get airborne and
proceed to the IP. Once you are in place at the IP you are “on station.” Newly on station
aircraft should check in with the JTAC.
● A check-in is conducted as follows:
○ Line 1: “[JTAC CS] this is [FLIGHT LEAD CS].”
○ Line 2: “[number] [type of aircraft]”
○ Line 3: “on station at [bullseye/grid] [altitude]”
○ Line 4: “[list weapons]”
○ Line 5: “[play time]”
○ “Available for tasking.”
● Once a check-in is conducted, the aircraft loiters at the IP and awaits tasking.
● When it comes in, you should level off and write down the 9 line. Next you will be asked
to advise when ready to copy remarks and restrictions. Copy these down. You will be
asked to read back.
● A readback is lines 4-6 and any restrictions, as we have gone over already.
● Once you have all the mission data, you should reference your map. You should shift
click on the target, which will create a personal waypoint (a green carrot on the top of
your screen). This will allow you to have some situational awareness on where the target
is, as well as zero in on it after the IP.
● Now fly to the IP. When at the IP, report IP inbound.
● You will be told to continue or abort.
● If you are to continue, align the nose of your aircraft on the attack heading.
● If there is a final attack heading you will need to fly the initial heading, followed by a turn
point onto the final attack heading.
● You will be able to visually see the target using your eyes. It will be a faint green carrot
on the ground. I do not consider this gamey, because in reality the aircraft has avionics
which will visually show you EXACTLY where the target is.
● At this point, the JTAC will mark the target, if type 1 or clear you to engage if type 3.
If you see the mark, you will respond with “contact the mark”, if you cannot, you will
respond with “Negative mark” or “No joy the mark”
● If you contact the mark, you will be cleared hot. NOW and ONLY NOW may you release
weapons and ONLY on the target. The only circumstance in which you would be allowed
to release weapons prior to this would be for self-defense reasons. You may also not
attack targets of opportunity unless they pose a direct threat to you - you do not have the
situational awareness and overall targeting skills of the JTAC from the air.
15. ● In a type 3 CAS run you will be cleared to engage rather than cleared hot. You may
basically attack at your own discretion now, as long as you follow the restrictions in the
remarks section.
● You will make ONE pass (type 3 excluded) after reporting “in from the [cardinal direction
where your attacking from]”, even if you miss the target. You will then egress to
whatever direction is stipulated in line 9.
● When egressing you will report “off” and “X away” where X is the amount of bombs or
missiles. In a type 3 request, you will report “attack complete.”
● If the JTAC deems a re-attack is necessary, he will call for it by saying like
something “from hits, west 500” - at this point you can return to the IP and follow the
exact same attack profile unless stipulated otherwise.
● The mission ends with you returning to the IP.
PROPER RADIO BREVITY AND TERMINOLOGY
A lot of using aircraft properly is radio brevity. Why? It isn’t so you sound cool. It isn’t so you feel
like you have a big dick. We need to make that clear right now. Instead, its because air combat
is so fast paced that you must convey complicated information in a clear, quick and concise
manner. Whenever anyone thinks you are milsiming or nerding out challenge them to convey
the same information using their regular language. They will fail.
Now that we have that out of the way, let’s talk about some terminology.
http://www.krauselabs.net/dump/brevity1.png
http://www.krauselabs.net/dump/brevity2.png
What everything looks like together:
http://www.krauselabs.net/dump/casattack.png
Any questions? I know that was very brief. Ultimately it will fall to individual skills when it comes
to piloting. The thing to take away from this is to understand the theoretical process of close air
support, so you can better understand the JTAC, and better attack the enemy.
Crash Course on Ordnance (7 minutes)
Practice @ co_13_close_air_support_Training (25
minutes)
● Go over special gear
● Run dry runs
● Any final questions/guidance
16. Practical @ co_13_close_air_support (45-60 minutes)
Grading Criteria:
1. Know the enemy situation and location of friendly units.
2. Know the supported commander’s target priority, desired effects and timing of fires.
3. Know the commanders intent and applicable ROE.
4. Validate targets of opportunity.
5. Advise the commander on proper employment of air assets.
6. Submit immediate requests for CAS.
7. Control CAS with supported commander’s approval.
8. Deconflict aircraft and fires from CAS sorties.
9. Provide initial BDA report.
What you did right:
What you did wrong:
Points for improvement:
Debrief
● Go around to each person, real quickly, what I could improve upon, what was done well,
what are your overall thoughts
● Anyone interested in helping me run future courses?