Introduction of road
•Download as PPTX, PDF•
0 likes•22 views
This document outlines a course in basic transportation engineering. It includes information on the faculty member teaching the course, G.A. Patel of Government Polytechnic Himatnagar. The course covers roads, railways, and bridges, with the goals of explaining their importance and geometrical aspects, comprehending their construction and maintenance, and performing tests on materials. It provides an overview of the main topics to be covered for each type of transportation infrastructure. These include road geometrics, materials, and drainage; railway points, crossings and track maintenance; and bridge investigation, structure, and maintenance. The document also lists assignments involving dimensional sketches and practical tests and reports.
Report
Share
Report
Share
Recommended
Real-Time Video Processing using Contour Numbers and Angles for Non-urban Roa...
Road users make vital decisions to safely maneuver their vehicles based on the road markers, which need to be correctly classified. The road markers classification is significantly important especially for the autonomous car technology. The current problems of extensive processing time and relatively lower average accuracy when classifying up to five types of road markers are addressed in this paper. Two novel real time video processing methods are proposed by extracting two formulated features namely the contour number, , and angle, 휃 to classify the road markers. Initially, the camera position is calibrated to obtain the best Field of View (FOV) for identifying a customized Region of Interest (ROI). An adaptive smoothing algorithm is performed on the ROI before the contours of the road markers and the corresponding two features are determined. It is observed that the achievable accuracy of the proposed methods at several non-urban road scenarios is approximately 96% and the processing time per frame is significantly reduced when the video resolution increases as compared to that of the existing approach.
Traffic engineering(te)
This document provides an overview of a traffic engineering course. The objectives are to provide insight into traffic components and factors, explain how to conduct and analyze various traffic surveys, illustrate how to apply statistical tools to traffic data, and provide insight into traffic regulations and control devices. The outcomes are for students to be able to describe traffic characteristics, conduct and analyze surveys, apply statistical tools, and classify regulations and design control devices. The syllabus covers traffic characteristics like components, user characteristics, maneuvers, and stream characteristics. It defines stream parameters like volume, density, headway, and speed.
Wre 1 course file format SSIPMT RAIPUR ,CHATTISGARH
This document provides information about the Water Resource Engineering-I course for 7th semester civil engineering students. It includes the unit outcomes, course objectives, mapping of course outcomes to program outcomes, scheme of teaching and examination, course structure, book plan, marking scheme, lesson plan, unit-wise lesson plan, bridge course details, course utilization, assignment questions, tutorial plan, model paper, question bank, and NPTEL indexing. The course aims to help students understand basic concepts of irrigation, water requirements of crops, design of canals, water logging, river training, and reservoir planning. It will be taught over 4 lectures, 1 tutorial, and evaluated through exams, class tests, assignments, and tutorials totaling to 120 marks.
Observation on College Steel Bridge Truss Models Thailand Eighth Contest and ...
This work presents the processes, scoring system, and observation of the Thailand’s College Steel Bridge Truss Models 2011 Contest. For Thammasat University (TU) Bridge Design team model, we applied the load and resistance factor design (LRFD) of bridges [1], [2]. Prior, the AASHTO LRFD Bridge Code was reviewed which included investigation into the design code’s background documentation [3]. For this contest, the bridge models must be the steel bridge truss structures with span lengths 5 meters. All structural members must be the rolled-steel shape members. The scoring system for the contest is comprised of four categories: 1) Construction Speed Score, 2) Economy Score which is consisted with two parts that are the labor and material costs, 3) Structural Stiffness Score, and 4) Structural Efficiency. Types of truss failures have been observed.
A Project Report On DESIGN OF A FLEXIBLE PAVEMENT FOR AN EXISTING COLONY
This document is a project report on the design of a flexible pavement for an existing colony. It was submitted by 5 students to fulfill the requirements for a Bachelor of Engineering degree in Civil Engineering. The document includes an introduction to pavement design, types of pavements, functions of pavement components, factors to consider in design, and methodology for flexible pavement design using group index and CBR methods. Laboratory tests were conducted on soil samples including liquid limit, plastic limit, sieve analysis, proctor compaction, specific gravity, and CBR. Field surveys were also conducted to obtain level data along proposed road alignments. Earthwork estimations were provided based on the survey.
vino journal.docx
This document discusses a traffic survey conducted at Rajiv Gandhi Square in Puducherry, India to collect data for designing a grade separator at the intersection. The intersection is a five-arm junction where a national highway and coastal road cross. Traffic surveys were done according to Indian standards to determine traffic volumes on each arm. The surveys found the highest hourly traffic to be 12,434 passenger car units during peak hours. Daily average traffic was highest on the Chennai, Cuddalore, and Puducherry arms. The data collected will be used to design a grade separator to reduce traffic congestion at the busy intersection while working within the available space constraints.
BASIC CIVIL AND MECHANICAL ENGINEERING.pptx
This document outlines the syllabus for a basic civil and mechanical engineering course. The course objectives are to familiarize students with the scope of civil and mechanical engineering, introduce basic concepts in areas like building planning and construction, surveying, transportation, water resources, and manufacturing processes. The course outcomes are that students will understand the various sub-disciplines of civil engineering and their roles, learn concepts in surveying, transportation infrastructure and design, water resources, and manufacturing processes. The syllabus covers topics in civil engineering fundamentals and disciplines, surveying, transportation engineering, water resources, and recommended textbooks.
KTU CE 204 Construction Technology - Conclusion
APJ Abdul Kalam Technological University, India - B. Tech. in Civil Engineering - 4th Semester CE 204 Construction Technology - Conclusion
Recommended
Real-Time Video Processing using Contour Numbers and Angles for Non-urban Roa...
Road users make vital decisions to safely maneuver their vehicles based on the road markers, which need to be correctly classified. The road markers classification is significantly important especially for the autonomous car technology. The current problems of extensive processing time and relatively lower average accuracy when classifying up to five types of road markers are addressed in this paper. Two novel real time video processing methods are proposed by extracting two formulated features namely the contour number, , and angle, 휃 to classify the road markers. Initially, the camera position is calibrated to obtain the best Field of View (FOV) for identifying a customized Region of Interest (ROI). An adaptive smoothing algorithm is performed on the ROI before the contours of the road markers and the corresponding two features are determined. It is observed that the achievable accuracy of the proposed methods at several non-urban road scenarios is approximately 96% and the processing time per frame is significantly reduced when the video resolution increases as compared to that of the existing approach.
Traffic engineering(te)
This document provides an overview of a traffic engineering course. The objectives are to provide insight into traffic components and factors, explain how to conduct and analyze various traffic surveys, illustrate how to apply statistical tools to traffic data, and provide insight into traffic regulations and control devices. The outcomes are for students to be able to describe traffic characteristics, conduct and analyze surveys, apply statistical tools, and classify regulations and design control devices. The syllabus covers traffic characteristics like components, user characteristics, maneuvers, and stream characteristics. It defines stream parameters like volume, density, headway, and speed.
Wre 1 course file format SSIPMT RAIPUR ,CHATTISGARH
This document provides information about the Water Resource Engineering-I course for 7th semester civil engineering students. It includes the unit outcomes, course objectives, mapping of course outcomes to program outcomes, scheme of teaching and examination, course structure, book plan, marking scheme, lesson plan, unit-wise lesson plan, bridge course details, course utilization, assignment questions, tutorial plan, model paper, question bank, and NPTEL indexing. The course aims to help students understand basic concepts of irrigation, water requirements of crops, design of canals, water logging, river training, and reservoir planning. It will be taught over 4 lectures, 1 tutorial, and evaluated through exams, class tests, assignments, and tutorials totaling to 120 marks.
Observation on College Steel Bridge Truss Models Thailand Eighth Contest and ...
This work presents the processes, scoring system, and observation of the Thailand’s College Steel Bridge Truss Models 2011 Contest. For Thammasat University (TU) Bridge Design team model, we applied the load and resistance factor design (LRFD) of bridges [1], [2]. Prior, the AASHTO LRFD Bridge Code was reviewed which included investigation into the design code’s background documentation [3]. For this contest, the bridge models must be the steel bridge truss structures with span lengths 5 meters. All structural members must be the rolled-steel shape members. The scoring system for the contest is comprised of four categories: 1) Construction Speed Score, 2) Economy Score which is consisted with two parts that are the labor and material costs, 3) Structural Stiffness Score, and 4) Structural Efficiency. Types of truss failures have been observed.
A Project Report On DESIGN OF A FLEXIBLE PAVEMENT FOR AN EXISTING COLONY
This document is a project report on the design of a flexible pavement for an existing colony. It was submitted by 5 students to fulfill the requirements for a Bachelor of Engineering degree in Civil Engineering. The document includes an introduction to pavement design, types of pavements, functions of pavement components, factors to consider in design, and methodology for flexible pavement design using group index and CBR methods. Laboratory tests were conducted on soil samples including liquid limit, plastic limit, sieve analysis, proctor compaction, specific gravity, and CBR. Field surveys were also conducted to obtain level data along proposed road alignments. Earthwork estimations were provided based on the survey.
vino journal.docx
This document discusses a traffic survey conducted at Rajiv Gandhi Square in Puducherry, India to collect data for designing a grade separator at the intersection. The intersection is a five-arm junction where a national highway and coastal road cross. Traffic surveys were done according to Indian standards to determine traffic volumes on each arm. The surveys found the highest hourly traffic to be 12,434 passenger car units during peak hours. Daily average traffic was highest on the Chennai, Cuddalore, and Puducherry arms. The data collected will be used to design a grade separator to reduce traffic congestion at the busy intersection while working within the available space constraints.
BASIC CIVIL AND MECHANICAL ENGINEERING.pptx
This document outlines the syllabus for a basic civil and mechanical engineering course. The course objectives are to familiarize students with the scope of civil and mechanical engineering, introduce basic concepts in areas like building planning and construction, surveying, transportation, water resources, and manufacturing processes. The course outcomes are that students will understand the various sub-disciplines of civil engineering and their roles, learn concepts in surveying, transportation infrastructure and design, water resources, and manufacturing processes. The syllabus covers topics in civil engineering fundamentals and disciplines, surveying, transportation engineering, water resources, and recommended textbooks.
KTU CE 204 Construction Technology - Conclusion
APJ Abdul Kalam Technological University, India - B. Tech. in Civil Engineering - 4th Semester CE 204 Construction Technology - Conclusion
RAILWAYS,HARBOR, TUNNEL ENGINEERING
This document discusses tools and equipment used for railway track maintenance. It outlines the objectives of maintenance to prolong the life of tracks and rolling stock and increase safety. Good maintenance allows for higher train speeds, fuel savings, and more passenger usage. Tracks require maintenance due to deterioration from train loads, weathering, and curvature effects. Maintenance includes daily checks using hand tools and periodic rebuilding every 2-3 years using both hand tools and mechanical equipment like lifting jacks and tampers to realign tracks, level ballast, and replace worn components like crossings and tunnels. Common hand tools are rail gauges, spanners, picks, shovels and levels, while mechanical tools help lift and align larger sections of track.
Ge6251 bcme notes with question bank
The document provides information about surveying and civil engineering materials. It discusses the objectives and principles of surveying, including the different types of surveying based on area and accuracy. Chain surveying is described as measuring linear distances only using a measuring chain, ranging rods, and offsets. Key components of chain surveying include establishing base lines, measuring distances, and taking perpendicular and oblique offsets. Compass surveying is introduced as using a prismatic compass to measure angles between adjacent lines in addition to linear measurements. Civil engineering materials mentioned include bricks, stones, sand, cement and concrete.
final-file
This document provides details of a project to replace and design the superstructure of the Chhaterian Bridge located 500m downstream of the Rasul hydro power house in Pakistan. The project aims to improve transportation for local residents by upgrading the bridge from a narrow footbridge to a dual-lane structure. The document outlines the project activities which include evaluating the existing foundation, conducting surveys, analyzing and designing the bridge beams and slab, designing the canal lining and approach roads. It also provides a literature review of relevant methods for foundation testing, surveying, structural analysis and design, canal design, and road design to complete the project.
Design & Construction of B.I.T. Driveway (As per rural specification)
The motive of undertaking this project of “Design & Construction of B.I.T. Driveway (As per rural
specification)” is to study and evaluate the performance in real design and working conditions of the rural road
flexible pavement with IRC:37-2001 and IRC:SP:20-2002. In this paper, the work is carried out to measure the
traffic volume on the top surface of the B.I.T. Driveway. Rural connectivity is taken as one of the major
component in increasing the agricultural output and earning capacity of the rural population. There is a marked
improvement in quality of life by way of better educational facilities, improved health services, improved
attendance by the school teachers as well as students.
R18 b.tech.civilengg.syllabus (1)
This document provides the syllabus for the B.Tech Civil Engineering course at Jawaharlal Nehru Technological University Hyderabad from 2018-2019. It outlines the courses required each semester over the 4 year program, including course codes, titles, credit hours and brief descriptions. In the first year, courses cover general topics in mathematics, physics, chemistry, programming and engineering basics. Later years focus on civil engineering topics such as surveying, strength of materials, structural analysis, transportation, hydraulics, geotechnical engineering, environmental engineering and more. The syllabus also lists professional and open electives students can choose from each semester.
Railway engineering
This PPT file is made for getting basic information for Railway Engineering and has gotten from an Indian book.
Ce syllabi-6 s-2010
This document outlines the syllabus for the 6th semester B.Tech degree program in Civil Engineering. It includes courses on Structural Design II, Transportation Engineering II, Environmental Engineering, and electives. Specific courses cover topics like design of steel and timber structures, railway and airport design, water supply and wastewater treatment, and labs involving fluid mechanics and environmental engineering experiments.
TRE-L1.pptx
1. This document outlines the syllabus and objectives for a Transportation Engineering course taught by Dr. Preeti Kulkarni at Vishwakarma Institute of Information Technology in Pune, India.
2. The course aims to provide students with knowledge of traffic planning, highway design, bridge engineering, airport design, railway engineering, and tunnel and harbor engineering.
3. The syllabus covers topics such as highway alignment and design, traffic characteristics, materials testing, bridge components, airport layout and design, railway track structure, tunnel construction methods, and dock/harbor components.
Sem5
This document provides the syllabus for the course CE(PC)501 Design of RC Structures 2 at Maulana Abul Kalam Azad University of Technology, West Bengal for the academic year 2018-2019. The course aims to teach students how to analyze and design various reinforced concrete structural elements like beams, slabs, columns, footings and staircases using both working stress and limit state methods according to Indian codes. The syllabus covers topics like load calculations, design of singly and doubly reinforced beams and slabs, continuous structures, short columns, isolated and combined footings, pile foundations, and structural drawings and detailing. Prerequisites for the course include Introduction to Solid Mechanics and Concrete Technology.
unit-iii-station-yards-railway-signalling-interlocking-railway-track-construc...
This document provides information about the Transportation Engineering-II course taught by Prof. Rajesh Bhagat. It includes details about the course objectives, outcomes, and units which cover topics like railway transportation systems, design of tracks, air transportation development, and tunnel construction. The units will help students develop an ability to understand, design, and keep updated about various transportation infrastructure and technologies. The document also lists textbooks and reference books recommended for the course.
IRJET- Comparative Study of Effect of Varying Span Length on Major Elemen...
This document compares two curved bridge models for a metro system with a total span of 100 meters. Model 1 has a mid span of 70 meters and side spans of 15 meters each. Model 2 has a mid span of 40 meters and side spans of 30 meters each. The study aims to determine a suitable bridge design for the metro system that considers both construction and traffic planning issues. The models are analyzed using STAAD Pro software to calculate responses like displacement, stress, and loading based on Indian codes. The results will help generalize the metro bridge design and traffic planning for this location.
Metro project in inda
The document discusses India's underground metro rail projects. It provides details on the existing metro systems in Kolkata and Delhi, as well as future and proposed systems in Mumbai, Bangalore, Hyderabad, Chennai, and Kochi. Key details include project lengths, costs, construction timelines, passenger capacity, and technological features like automatic ticket systems. The document argues that metro systems reduce traffic, pollution and fuel costs while being more energy efficient compared to other transit options. Suggestions are provided to maximize metro usage through integrated ticketing and parking incentives.
Disk+able mobility aid vehicle for thai wheelchair users upload 20140520 tue
Disk+able mobility aid vehicle for thai wheelchair users upload 20140520 tuekulthida teachavorasinskun
2551 - Teachavorasinskun, K., Komolkiti , P., Jirapiriyalert, C. (2008) Disk+Able: Mobility Aid Vehicle for Thai Wheelchair Users [Electronic version]. Proceedings of the 9th Southeast Asian Ergonomics Conference, 22-24 October 2008, Bangkok, Thailand. www.SEAES2008.orgTRANSPORTATION_ENGINEERING_BRIDGING.pdf
Course Outcomes-
CO1- Comprehend various types of transportation systems and their history of the development
CO2- Comprehend various types of pavements
CO3- Design the pavements by considering various aspects associated with traffic safety measures.
Topic Learning Outcomes:
C603.1.1 Understand the significance of various modes of transportation
C603.1.2 Discuss developments in road construction and Classify roads based on certain criteria.
C603.1.3 Describe factors for selecting road alignments and carrying out road surveys.
C603.2.1 Impart knowledge about various materials used for highway construction.
C603.2.2 Describe tests carried out on materials used for highway construction.
C603.2.3 Introduce the fundamental concepts of highway construction
C603.2.4 Classify pavements on the basis of structural behavior.
C603.3.1 Design different road geometrical elements.
C603.3.2 Identify traffic stream characteristics and Design a pre-timed signalized intersection.
C603.3.3 Identify causes of road accidents and measures for road safety.
C603.3.3 Analyze the important features of pavement designing.
Civil course
The document outlines a proposed curriculum for a B.Tech program in Civil Engineering at the National Institute of Technology Arunachal Pradesh.
It includes details of the semester-wise credit distribution, category-wise credit distribution across core subjects, electives, labs, internships and projects.
Course structures are provided for each semester, listing the subjects to be taught, course codes, titles, credits and outcomes. Elective subjects, open electives, internship details and the project dissertation are also described.
BMRCL In-Plant Training Report
This document provides information about the Bangalore Metro Rail project in India. It discusses the history of mass rapid transit proposals for Bangalore going back to 1982. It describes some of the early feasibility studies and proposals for metro and commuter rail systems. It outlines the formation of the Bangalore Mass Rapid Transit Limited in 1994 to implement a mass transit system. The document then discusses the Delhi Metro Rail Corporation's 2003 proposal for the Phase I of the Bangalore Metro project, which was eventually approved in 2005. It provides details about various aspects of the metro system's construction, including piling, elevated viaduct construction using precast segments, and underground tunneling using tunnel boring machines. It also shares experiences from site visits to different construction
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Call Girls Goa (india) ☎️ +91-7426014248 Goa Call Girl
Call Girls Goa (india) ☎️ +91-7426014248 Goa Call Girl
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
More Related Content
Similar to Introduction of road
RAILWAYS,HARBOR, TUNNEL ENGINEERING
This document discusses tools and equipment used for railway track maintenance. It outlines the objectives of maintenance to prolong the life of tracks and rolling stock and increase safety. Good maintenance allows for higher train speeds, fuel savings, and more passenger usage. Tracks require maintenance due to deterioration from train loads, weathering, and curvature effects. Maintenance includes daily checks using hand tools and periodic rebuilding every 2-3 years using both hand tools and mechanical equipment like lifting jacks and tampers to realign tracks, level ballast, and replace worn components like crossings and tunnels. Common hand tools are rail gauges, spanners, picks, shovels and levels, while mechanical tools help lift and align larger sections of track.
Ge6251 bcme notes with question bank
The document provides information about surveying and civil engineering materials. It discusses the objectives and principles of surveying, including the different types of surveying based on area and accuracy. Chain surveying is described as measuring linear distances only using a measuring chain, ranging rods, and offsets. Key components of chain surveying include establishing base lines, measuring distances, and taking perpendicular and oblique offsets. Compass surveying is introduced as using a prismatic compass to measure angles between adjacent lines in addition to linear measurements. Civil engineering materials mentioned include bricks, stones, sand, cement and concrete.
final-file
This document provides details of a project to replace and design the superstructure of the Chhaterian Bridge located 500m downstream of the Rasul hydro power house in Pakistan. The project aims to improve transportation for local residents by upgrading the bridge from a narrow footbridge to a dual-lane structure. The document outlines the project activities which include evaluating the existing foundation, conducting surveys, analyzing and designing the bridge beams and slab, designing the canal lining and approach roads. It also provides a literature review of relevant methods for foundation testing, surveying, structural analysis and design, canal design, and road design to complete the project.
Design & Construction of B.I.T. Driveway (As per rural specification)
The motive of undertaking this project of “Design & Construction of B.I.T. Driveway (As per rural
specification)” is to study and evaluate the performance in real design and working conditions of the rural road
flexible pavement with IRC:37-2001 and IRC:SP:20-2002. In this paper, the work is carried out to measure the
traffic volume on the top surface of the B.I.T. Driveway. Rural connectivity is taken as one of the major
component in increasing the agricultural output and earning capacity of the rural population. There is a marked
improvement in quality of life by way of better educational facilities, improved health services, improved
attendance by the school teachers as well as students.
R18 b.tech.civilengg.syllabus (1)
This document provides the syllabus for the B.Tech Civil Engineering course at Jawaharlal Nehru Technological University Hyderabad from 2018-2019. It outlines the courses required each semester over the 4 year program, including course codes, titles, credit hours and brief descriptions. In the first year, courses cover general topics in mathematics, physics, chemistry, programming and engineering basics. Later years focus on civil engineering topics such as surveying, strength of materials, structural analysis, transportation, hydraulics, geotechnical engineering, environmental engineering and more. The syllabus also lists professional and open electives students can choose from each semester.
Railway engineering
This PPT file is made for getting basic information for Railway Engineering and has gotten from an Indian book.
Ce syllabi-6 s-2010
This document outlines the syllabus for the 6th semester B.Tech degree program in Civil Engineering. It includes courses on Structural Design II, Transportation Engineering II, Environmental Engineering, and electives. Specific courses cover topics like design of steel and timber structures, railway and airport design, water supply and wastewater treatment, and labs involving fluid mechanics and environmental engineering experiments.
TRE-L1.pptx
1. This document outlines the syllabus and objectives for a Transportation Engineering course taught by Dr. Preeti Kulkarni at Vishwakarma Institute of Information Technology in Pune, India.
2. The course aims to provide students with knowledge of traffic planning, highway design, bridge engineering, airport design, railway engineering, and tunnel and harbor engineering.
3. The syllabus covers topics such as highway alignment and design, traffic characteristics, materials testing, bridge components, airport layout and design, railway track structure, tunnel construction methods, and dock/harbor components.
Sem5
This document provides the syllabus for the course CE(PC)501 Design of RC Structures 2 at Maulana Abul Kalam Azad University of Technology, West Bengal for the academic year 2018-2019. The course aims to teach students how to analyze and design various reinforced concrete structural elements like beams, slabs, columns, footings and staircases using both working stress and limit state methods according to Indian codes. The syllabus covers topics like load calculations, design of singly and doubly reinforced beams and slabs, continuous structures, short columns, isolated and combined footings, pile foundations, and structural drawings and detailing. Prerequisites for the course include Introduction to Solid Mechanics and Concrete Technology.
unit-iii-station-yards-railway-signalling-interlocking-railway-track-construc...
This document provides information about the Transportation Engineering-II course taught by Prof. Rajesh Bhagat. It includes details about the course objectives, outcomes, and units which cover topics like railway transportation systems, design of tracks, air transportation development, and tunnel construction. The units will help students develop an ability to understand, design, and keep updated about various transportation infrastructure and technologies. The document also lists textbooks and reference books recommended for the course.
IRJET- Comparative Study of Effect of Varying Span Length on Major Elemen...
This document compares two curved bridge models for a metro system with a total span of 100 meters. Model 1 has a mid span of 70 meters and side spans of 15 meters each. Model 2 has a mid span of 40 meters and side spans of 30 meters each. The study aims to determine a suitable bridge design for the metro system that considers both construction and traffic planning issues. The models are analyzed using STAAD Pro software to calculate responses like displacement, stress, and loading based on Indian codes. The results will help generalize the metro bridge design and traffic planning for this location.
Metro project in inda
The document discusses India's underground metro rail projects. It provides details on the existing metro systems in Kolkata and Delhi, as well as future and proposed systems in Mumbai, Bangalore, Hyderabad, Chennai, and Kochi. Key details include project lengths, costs, construction timelines, passenger capacity, and technological features like automatic ticket systems. The document argues that metro systems reduce traffic, pollution and fuel costs while being more energy efficient compared to other transit options. Suggestions are provided to maximize metro usage through integrated ticketing and parking incentives.
Disk+able mobility aid vehicle for thai wheelchair users upload 20140520 tue
Disk+able mobility aid vehicle for thai wheelchair users upload 20140520 tuekulthida teachavorasinskun
2551 - Teachavorasinskun, K., Komolkiti , P., Jirapiriyalert, C. (2008) Disk+Able: Mobility Aid Vehicle for Thai Wheelchair Users [Electronic version]. Proceedings of the 9th Southeast Asian Ergonomics Conference, 22-24 October 2008, Bangkok, Thailand. www.SEAES2008.orgTRANSPORTATION_ENGINEERING_BRIDGING.pdf
Course Outcomes-
CO1- Comprehend various types of transportation systems and their history of the development
CO2- Comprehend various types of pavements
CO3- Design the pavements by considering various aspects associated with traffic safety measures.
Topic Learning Outcomes:
C603.1.1 Understand the significance of various modes of transportation
C603.1.2 Discuss developments in road construction and Classify roads based on certain criteria.
C603.1.3 Describe factors for selecting road alignments and carrying out road surveys.
C603.2.1 Impart knowledge about various materials used for highway construction.
C603.2.2 Describe tests carried out on materials used for highway construction.
C603.2.3 Introduce the fundamental concepts of highway construction
C603.2.4 Classify pavements on the basis of structural behavior.
C603.3.1 Design different road geometrical elements.
C603.3.2 Identify traffic stream characteristics and Design a pre-timed signalized intersection.
C603.3.3 Identify causes of road accidents and measures for road safety.
C603.3.3 Analyze the important features of pavement designing.
Civil course
The document outlines a proposed curriculum for a B.Tech program in Civil Engineering at the National Institute of Technology Arunachal Pradesh.
It includes details of the semester-wise credit distribution, category-wise credit distribution across core subjects, electives, labs, internships and projects.
Course structures are provided for each semester, listing the subjects to be taught, course codes, titles, credits and outcomes. Elective subjects, open electives, internship details and the project dissertation are also described.
BMRCL In-Plant Training Report
This document provides information about the Bangalore Metro Rail project in India. It discusses the history of mass rapid transit proposals for Bangalore going back to 1982. It describes some of the early feasibility studies and proposals for metro and commuter rail systems. It outlines the formation of the Bangalore Mass Rapid Transit Limited in 1994 to implement a mass transit system. The document then discusses the Delhi Metro Rail Corporation's 2003 proposal for the Phase I of the Bangalore Metro project, which was eventually approved in 2005. It provides details about various aspects of the metro system's construction, including piling, elevated viaduct construction using precast segments, and underground tunneling using tunnel boring machines. It also shares experiences from site visits to different construction
Similar to Introduction of road (16)
Design & Construction of B.I.T. Driveway (As per rural specification)
Design & Construction of B.I.T. Driveway (As per rural specification)
unit-iii-station-yards-railway-signalling-interlocking-railway-track-construc...
unit-iii-station-yards-railway-signalling-interlocking-railway-track-construc...
IRJET- Comparative Study of Effect of Varying Span Length on Major Elemen...
IRJET- Comparative Study of Effect of Varying Span Length on Major Elemen...
Disk+able mobility aid vehicle for thai wheelchair users upload 20140520 tue
Disk+able mobility aid vehicle for thai wheelchair users upload 20140520 tue
Recently uploaded
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Call Girls Goa (india) ☎️ +91-7426014248 Goa Call Girl
Call Girls Goa (india) ☎️ +91-7426014248 Goa Call Girl
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Flow Through Pipe: the analysis of fluid flow within pipes
Flow Through Pipe: This topic covers the analysis of fluid flow within pipes, focusing on laminar and turbulent flow regimes, continuity equation, Bernoulli's equation, Darcy-Weisbach equation, head loss due to friction, and minor losses from fittings and bends. Understanding these principles is crucial for efficient pipe system design and analysis.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Recently uploaded (20)
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Call Girls Goa (india) ☎️ +91-7426014248 Goa Call Girl
Call Girls Goa (india) ☎️ +91-7426014248 Goa Call Girl
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
Flow Through Pipe: the analysis of fluid flow within pipes
Flow Through Pipe: the analysis of fluid flow within pipes
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Literature review for prompt engineering of ChatGPT.pptx
Literature review for prompt engineering of ChatGPT.pptx
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Introduction of road
- 1. Faculty name: G.A.Patel Government Polytechnic Himatnagar
- 2. L - 3 T - 0 P - 2 Total Teaching Hours =42 Total Practical Hours=28
- 3. CO After successful completion of the course, student will be able to C3340603.1 Explain the importance of transportation system and its geometrical aspects. C3340603.2 Comprehend the concept of construction and maintenance of roads, rails and bridge. C3340603.3 Perform the tests on the various materials used in construction and maintenance of roads, rails and bridge. C3340603.4 Supervise construction and maintenance of roads, rails and bridge.
- 4. Basic Transportation Engineering Three Main Types Roads Railway Bridges
- 5. 1. Introduction 2. Road Geometrics 3. Road material and Construction Aspects 4. Drainage and maintenance of Road
- 6. 1. Introduction 2. Points, Crossing and Yards 3. Maintenance of Railway Tracks
- 7. 1. Introduction 2. Investigation for Bridge 3. Bridge Structure and Superstructure 4. Maintenance of Bridge
- 8. Draw The Dimensional sketches of cross section of road (with function of each part of road), Road junction, Road curves abd Widening Carry out following tests On Aggregate 1) Impact Test 2) Crushing test 3) C B R Test
- 9. Draw the Dimensional sketches of cross section of permanent way & points & Crossing (With function of each part of road) Prepare a brief report after visit to railway trac & Yards
- 10. Thank you