Interlock Project
•Download as PPTX, PDF•
0 likes•103 views
This document provides before and after photographs of 4 residential roofing projects managed by the contractor. The projects involved removing old roof shingles and replacing them with new lifetime aluminum roof systems, as well as replacing roofs, soffits, fascia, and installing new gutters on homes in South Surrey, Port Moody, Maple Ridge and West Vancouver.
Report
Share
Report
Share
Recommended
Hyatt assignment
The Hyatt Regency hotel walkways collapsed in 1981 due to errors in the structural engineering design. The original design had each walkway supported by a single rod, but the fabricator modified the design to use two rods for each walkway without properly communicating the changes. This placed twice the intended stress on structural nuts, causing them to deform and the walkways to collapse. The engineering company approved the redesign without thoroughly checking it, demonstrating issues with the communication and review processes between the companies involved.
Kansas City Collapse
On July 17, 1981, the walkways on the second, third, and fourth floors of the Hyatt Regency hotel in Kansas City collapsed during a tea dance, killing 114 people and injuring over 200. The collapse was caused by a flawed design change where two sets of tie rods were used instead of one continuous set, doubling the load on the weakened connection points. An investigation found the revised design could only support 30% of the required load. The disaster remains studied for its engineering ethics failures and communication errors between the architect and contractor that led to the fatal design flaws.
Shepherd Elementary School Community Meeting Presentation (January 20, 2016)
Shepherd Elementary School Community Meeting Presentation (January 20, 2016)DC Department of General Services
This document discusses renovations being done to improve a school building. It shows photos of the building before and after renovations started. It provides updates on construction progress including excavation work in the courtyard, installation of foundation systems and retaining walls, pouring concrete slabs, and erecting structural steel. Upcoming work over the next two weeks is outlined and includes more excavation, concrete pouring, and structural steel erection. The document aims to elevate the quality of life in the district through school renovations.Btech compile 6 oct 4am
The beam and block flooring system uses precast concrete beams that are laid on foundations to support concrete blocks placed between the beams. This system provides a durable, cost-effective floor that is relatively easy to install without needing specialized skills. At the medical center project, a beam and block flooring system was used along with strip foundations, cavity wall construction, and a flat roof to construct a new single-story extension and remodeling of an existing surgery building.
PowerPoint report of Hyatt Regency Walkway Collapse of 1981
The Hyatt Regency walkway collapse in 1981 was caused by design changes that doubled the load carried by support rods. The original design used a single rod system, but was changed to two rods to simplify assembly. This forced each rod to support twice the intended load, causing the fourth floor walkway to collapse onto lower walkways and killing 114 people. Investigations found the changed design did not meet building code requirements and the engineers were later stripped of their licenses. New safety codes were implemented holding engineers responsible for approved designs.
HOLLOW CORE SLABS
The document summarizes the analysis and design of a multi-story institutional building with hollow core slabs. It discusses using Staad.Pro software to analyze and design the building's hollow core slabs, beams, columns, footings, and stairs. The production process of hollow core slabs is also outlined, including bed preparation, stressing strands, casting, curing, transport, and erection. Key activities to be performed include calculating loads, designing hollow core slabs, connecting slab panels, designing beams and columns, and designing footings.
Ralls ncc meeting-san_antonio_04-01-09
This document discusses accelerating bridge construction through modular and self-propelled modular transporter (SPMT) methods. It provides examples of contractor-driven and owner-driven accelerated bridge construction projects. Contractor-driven projects tend to be completed on time and under budget. Owner-driven projects aim to advance technologies and are often the first to use new methods, resulting in higher costs. The document outlines the benefits of accelerated bridge construction including reduced construction time, improved safety, and lower traffic impacts.
ABC in Alabama_2015 National ABC Conference Presentation
This document describes the accelerated bridge construction method used for the Ross Clark Circle Bridge in Dothan, Alabama. Temporary shoring boxes and falsework were used to support the construction of the new bridge superstructure adjacent to the existing bridge. The bridge was then slid into its permanent position in a short weekend window, allowing traffic to be maintained. Prefabricating the shoring boxes helped speed up construction. Lessons learned included improving the shoring box design for easier construction and transportation.
Recommended
Hyatt assignment
The Hyatt Regency hotel walkways collapsed in 1981 due to errors in the structural engineering design. The original design had each walkway supported by a single rod, but the fabricator modified the design to use two rods for each walkway without properly communicating the changes. This placed twice the intended stress on structural nuts, causing them to deform and the walkways to collapse. The engineering company approved the redesign without thoroughly checking it, demonstrating issues with the communication and review processes between the companies involved.
Kansas City Collapse
On July 17, 1981, the walkways on the second, third, and fourth floors of the Hyatt Regency hotel in Kansas City collapsed during a tea dance, killing 114 people and injuring over 200. The collapse was caused by a flawed design change where two sets of tie rods were used instead of one continuous set, doubling the load on the weakened connection points. An investigation found the revised design could only support 30% of the required load. The disaster remains studied for its engineering ethics failures and communication errors between the architect and contractor that led to the fatal design flaws.
Shepherd Elementary School Community Meeting Presentation (January 20, 2016)
Shepherd Elementary School Community Meeting Presentation (January 20, 2016)DC Department of General Services
This document discusses renovations being done to improve a school building. It shows photos of the building before and after renovations started. It provides updates on construction progress including excavation work in the courtyard, installation of foundation systems and retaining walls, pouring concrete slabs, and erecting structural steel. Upcoming work over the next two weeks is outlined and includes more excavation, concrete pouring, and structural steel erection. The document aims to elevate the quality of life in the district through school renovations.Btech compile 6 oct 4am
The beam and block flooring system uses precast concrete beams that are laid on foundations to support concrete blocks placed between the beams. This system provides a durable, cost-effective floor that is relatively easy to install without needing specialized skills. At the medical center project, a beam and block flooring system was used along with strip foundations, cavity wall construction, and a flat roof to construct a new single-story extension and remodeling of an existing surgery building.
PowerPoint report of Hyatt Regency Walkway Collapse of 1981
The Hyatt Regency walkway collapse in 1981 was caused by design changes that doubled the load carried by support rods. The original design used a single rod system, but was changed to two rods to simplify assembly. This forced each rod to support twice the intended load, causing the fourth floor walkway to collapse onto lower walkways and killing 114 people. Investigations found the changed design did not meet building code requirements and the engineers were later stripped of their licenses. New safety codes were implemented holding engineers responsible for approved designs.
HOLLOW CORE SLABS
The document summarizes the analysis and design of a multi-story institutional building with hollow core slabs. It discusses using Staad.Pro software to analyze and design the building's hollow core slabs, beams, columns, footings, and stairs. The production process of hollow core slabs is also outlined, including bed preparation, stressing strands, casting, curing, transport, and erection. Key activities to be performed include calculating loads, designing hollow core slabs, connecting slab panels, designing beams and columns, and designing footings.
Ralls ncc meeting-san_antonio_04-01-09
This document discusses accelerating bridge construction through modular and self-propelled modular transporter (SPMT) methods. It provides examples of contractor-driven and owner-driven accelerated bridge construction projects. Contractor-driven projects tend to be completed on time and under budget. Owner-driven projects aim to advance technologies and are often the first to use new methods, resulting in higher costs. The document outlines the benefits of accelerated bridge construction including reduced construction time, improved safety, and lower traffic impacts.
ABC in Alabama_2015 National ABC Conference Presentation
This document describes the accelerated bridge construction method used for the Ross Clark Circle Bridge in Dothan, Alabama. Temporary shoring boxes and falsework were used to support the construction of the new bridge superstructure adjacent to the existing bridge. The bridge was then slid into its permanent position in a short weekend window, allowing traffic to be maintained. Prefabricating the shoring boxes helped speed up construction. Lessons learned included improving the shoring box design for easier construction and transportation.
Superstructure construction
1. Superstructure construction includes column, beam, floor, wall and roof located above ground level. Materials used are timber, steel and concrete.
2. Timber floor construction involves plank wood supported by timber joists and beams. Reinforced concrete uses column and beam construction with formwork, steel bar installation and concrete pouring.
3. Load bearing walls support loads and transfer to foundation, with minimum thickness of one brick. Non-load bearing walls only support own weight and are half brick thickness.
2.5.11 King Street Station -- Grand Staircase & Under Jackson Plaza
The document provides a slideshow overview of the restoration work being done on the Grand Staircase and underground area beneath Jackson Plaza at a train station. It includes photos documenting the restoration of the grand staircase, construction of a new elevator shaft, seismic upgrades including steel shear walls, and the mechanical room being built below the plaza. Temporary supports are in place in preparation for connecting the plaza to the sidewalk.
Innovative Precast Bridge System
The document describes an innovative precast system for bridge substructures for short spans and low volume bridges. The system uses precast concrete components including a cap, lagging, and footings connected by mechanical couplers and supported by H-piles embedded in the footings. It offers benefits over conventional cast-in-place systems like reduced construction time, less concrete and reinforcement needed, and easier installation with smaller equipment. The precast system was determined to be the preferred alternative described for replacing an existing timber bridge.
North Dakota Precast Concrete
Wells Concrete builds and installs reliable, superior precast concrete products through the integration of experienced people, production technology and industry standards.
Builders-R-Us Projects
Builders-R-Us Construction Corp is a construction company located in New York that has completed numerous building projects including converting an existing 4-story structure in Harlem to a 6-story office building, exterior and interior restoration of 35 apartments in Brooklyn, masonry restoration in the Bronx, and constructing 29 dwelling units in Harlem through foundation, masonry, concrete, and facade work. The company has also done brownstone restoration and gut rehab projects in Brooklyn and the Bronx.
Bubble deck&hollow core slab
Bubble Deck and Hollow Core Slab are two types of prefabricated concrete slabs. Bubble Deck slabs contain hollow plastic balls embedded in the concrete to remove weight while maintaining strength. Hollow Core slabs are made with prestressed concrete and contain hollow voids running through them. Both systems provide benefits such as reduced weight, faster construction time, and lower costs compared to traditional cast-in-place slabs. Case studies demonstrate successful uses of these slab systems in Malaysia and overseas.
Topics brainstorm
The document discusses producing a documentary about the topic of social media. It will focus on the question "What underlying effect does social media have on us as people?". The target audience is people aged 16-24, which matches the age of students that will be interviewed at the filmmaker's college. The documentary will explore people's opinions on the effects of social media through interviews with a social media influencer, a psychology teacher, and vox pops with the public. It will also include archival footage from before the rise of social networking sites.
cells power point
This document provides an overview of the digestive and excretory systems for second grade students over five days. It explains that the digestive system breaks down food and the excretory system eliminates waste. Key parts of the digestive system discussed include the mouth, esophagus, stomach, small intestine, large intestine, liver, gallbladder and pancreas. Their functions in digestion are described. The roles of the liver, gallbladder and pancreas in producing bile and digestive juices are also outlined. On day four it introduces that the excretory system helps eliminate toxins.
Sarah aull surface resistance of a bulk-like nb film
This document summarizes research on the surface resistance of a niobium film deposited on a copper substrate using electron cyclotron resonance. Penetration depth measurements found the film to be bulk-like. Thermal cycling did not affect the low-field surface resistance but did influence the Q-slope. Faster cooling rates and larger temperature gradients during cooldown led to lower surface resistance, with the fastest quench yielding the lowest resistance. Comparisons with other niobium film studies showed cooling conditions can impact performance but effects depend on deposition technique, geometry, and microstructure. Further controlled experiments are needed to understand the influence of thermal gradients and currents.
Russo's Reply to Counterclaim
NT Properties filed a reply to the counterclaim of Sycamore Vista Land For Sale. NT Properties admits some allegations but denies most for lack of knowledge. NT Properties argues that some allegations are just legal arguments and should be disregarded. NT Properties denies that the counterclaim states a valid cause of action and alleges it is barred by estoppel and unjust enrichment. NT Properties argues the counterclaim violates pleading requirements and denies any allegations not expressly admitted. NT Properties requests that the counterclaim be dismissed and that it be awarded attorney fees.
Automating Your Transactions on the Ariba Network
Leading sellers are using B2B integration in order to automate their connection to the Ariba Network. B2B integration helps them to reduce costs associated with manual document keying and drive up customer satisfaction through faster, more accurate response rates to customer purchase orders and cleaner, more accurate invoices. Join this panel of leading sellers as they discuss when and how suppliers should integrate.
AFD
Este documento presenta un curso de iniciación a informática e Internet que incluye el uso de ratón, teclado y mecanografía, procesadores de texto, funcionamiento básico de ordenadores, gestión de archivos, búsqueda en Internet, correo electrónico, redes sociales, y trámites electrónicos; y se ofrece en el Centro Guadalinfo de Pozo Alcón sin requerir conocimientos previos.
More Related Content
What's hot
Superstructure construction
1. Superstructure construction includes column, beam, floor, wall and roof located above ground level. Materials used are timber, steel and concrete.
2. Timber floor construction involves plank wood supported by timber joists and beams. Reinforced concrete uses column and beam construction with formwork, steel bar installation and concrete pouring.
3. Load bearing walls support loads and transfer to foundation, with minimum thickness of one brick. Non-load bearing walls only support own weight and are half brick thickness.
2.5.11 King Street Station -- Grand Staircase & Under Jackson Plaza
The document provides a slideshow overview of the restoration work being done on the Grand Staircase and underground area beneath Jackson Plaza at a train station. It includes photos documenting the restoration of the grand staircase, construction of a new elevator shaft, seismic upgrades including steel shear walls, and the mechanical room being built below the plaza. Temporary supports are in place in preparation for connecting the plaza to the sidewalk.
Innovative Precast Bridge System
The document describes an innovative precast system for bridge substructures for short spans and low volume bridges. The system uses precast concrete components including a cap, lagging, and footings connected by mechanical couplers and supported by H-piles embedded in the footings. It offers benefits over conventional cast-in-place systems like reduced construction time, less concrete and reinforcement needed, and easier installation with smaller equipment. The precast system was determined to be the preferred alternative described for replacing an existing timber bridge.
North Dakota Precast Concrete
Wells Concrete builds and installs reliable, superior precast concrete products through the integration of experienced people, production technology and industry standards.
Builders-R-Us Projects
Builders-R-Us Construction Corp is a construction company located in New York that has completed numerous building projects including converting an existing 4-story structure in Harlem to a 6-story office building, exterior and interior restoration of 35 apartments in Brooklyn, masonry restoration in the Bronx, and constructing 29 dwelling units in Harlem through foundation, masonry, concrete, and facade work. The company has also done brownstone restoration and gut rehab projects in Brooklyn and the Bronx.
Bubble deck&hollow core slab
Bubble Deck and Hollow Core Slab are two types of prefabricated concrete slabs. Bubble Deck slabs contain hollow plastic balls embedded in the concrete to remove weight while maintaining strength. Hollow Core slabs are made with prestressed concrete and contain hollow voids running through them. Both systems provide benefits such as reduced weight, faster construction time, and lower costs compared to traditional cast-in-place slabs. Case studies demonstrate successful uses of these slab systems in Malaysia and overseas.
What's hot (6)
2.5.11 King Street Station -- Grand Staircase & Under Jackson Plaza
2.5.11 King Street Station -- Grand Staircase & Under Jackson Plaza
Viewers also liked
Topics brainstorm
The document discusses producing a documentary about the topic of social media. It will focus on the question "What underlying effect does social media have on us as people?". The target audience is people aged 16-24, which matches the age of students that will be interviewed at the filmmaker's college. The documentary will explore people's opinions on the effects of social media through interviews with a social media influencer, a psychology teacher, and vox pops with the public. It will also include archival footage from before the rise of social networking sites.
cells power point
This document provides an overview of the digestive and excretory systems for second grade students over five days. It explains that the digestive system breaks down food and the excretory system eliminates waste. Key parts of the digestive system discussed include the mouth, esophagus, stomach, small intestine, large intestine, liver, gallbladder and pancreas. Their functions in digestion are described. The roles of the liver, gallbladder and pancreas in producing bile and digestive juices are also outlined. On day four it introduces that the excretory system helps eliminate toxins.
Sarah aull surface resistance of a bulk-like nb film
This document summarizes research on the surface resistance of a niobium film deposited on a copper substrate using electron cyclotron resonance. Penetration depth measurements found the film to be bulk-like. Thermal cycling did not affect the low-field surface resistance but did influence the Q-slope. Faster cooling rates and larger temperature gradients during cooldown led to lower surface resistance, with the fastest quench yielding the lowest resistance. Comparisons with other niobium film studies showed cooling conditions can impact performance but effects depend on deposition technique, geometry, and microstructure. Further controlled experiments are needed to understand the influence of thermal gradients and currents.
Russo's Reply to Counterclaim
NT Properties filed a reply to the counterclaim of Sycamore Vista Land For Sale. NT Properties admits some allegations but denies most for lack of knowledge. NT Properties argues that some allegations are just legal arguments and should be disregarded. NT Properties denies that the counterclaim states a valid cause of action and alleges it is barred by estoppel and unjust enrichment. NT Properties argues the counterclaim violates pleading requirements and denies any allegations not expressly admitted. NT Properties requests that the counterclaim be dismissed and that it be awarded attorney fees.
Automating Your Transactions on the Ariba Network
Leading sellers are using B2B integration in order to automate their connection to the Ariba Network. B2B integration helps them to reduce costs associated with manual document keying and drive up customer satisfaction through faster, more accurate response rates to customer purchase orders and cleaner, more accurate invoices. Join this panel of leading sellers as they discuss when and how suppliers should integrate.
AFD
Este documento presenta un curso de iniciación a informática e Internet que incluye el uso de ratón, teclado y mecanografía, procesadores de texto, funcionamiento básico de ordenadores, gestión de archivos, búsqueda en Internet, correo electrónico, redes sociales, y trámites electrónicos; y se ofrece en el Centro Guadalinfo de Pozo Alcón sin requerir conocimientos previos.
Viewers also liked (8)
Sarah aull surface resistance of a bulk-like nb film
Sarah aull surface resistance of a bulk-like nb film
Interlock Project
- 1. Please view before and after photographs of some typical Residential projects I have managed
- 2. 150 St, South Surrey Replacement of roof, Soffits, fascia's and Soffit Sub-frame and install new in line gutters Before After
- 3. 35 Foxwood Drive , Port Moody, BC To remove old roof shingles and replace with new Lifetime Aluminum roof systems Before After
- 4. 20679 Turner Avenue, Maple Ridge, BC To remove old roof shingles and replace with new Lifetime Aluminum roof systems Before After
- 5. 28th Street, West Vancouver, BC To remove old roof shingles and replace with new Lifetime Aluminum roof systems Before After