All the data in this ppt are from different sites on google. I don't own these.

1. HYDROLOGY AND
WATER
RESOURCES
SOFTWARE
BY H A R I YA L I P U JA R A

2. FLOWMASTER
 FlowMaster is a solve-for-
anything hydraulic toolbox
that enables engineers to
design and analyze a wide
variety of hydraulic
elements.

3. FLOWMASTER
• Hydraulic Calculator Software
• Doing hydraulic calculations in a spreadsheet is an error-prone process.
FlowMaster helps us to perform hydraulic calculations for dozens of element
types, from pipes and open channels to drop inlets and weirs.
• Solve for any unknown property
• Design for any desired characteristic
• Produce detailed reports and rating curves on the fly
• FlowMaster improves design productivity, ultimately saving project costs.

4. FLOWMASTER
• FlowMaster’s interface is simple enough to be the easiest model and as
well as so powerful and can be solve real problems in just minutes.
• Pressure pipe design
Perform a quick check or design by plugging in the known information and
automatically solving for pipe length, start-and-stop elevations and pressures,
discharge, diameter, and roughness.
• Inlet hydraulics
Design and analyse gate, curb, ditch, slotted and combination inlets using
calculations based on the FHWA Federal Highway Administration Hydraulic
Engineering Circular No. 12 and Circular No. 22 methodologies.

5. FLOWMASTER
• Open channel hydraulics
Design and analyse channels, ditches, and free surface pipes of any shape
including circular, box, elliptical, parabolic, and irregular channels.
• Weir and orifice modelling
Size weirs considering discharge, weir coefficients, and crest, headwater, and
tail water elevations for the following types: rectangular, V-notch, Cipolletti,
broad crested, or custom size.

6. CAPABILITIES
Calculate hydraulics
• Quickly perform hydraulic calculations for dozens of hydraulic element types,
from pipes and open channels to inlets and weirs.
Interpret and present modeling results
• View detailed tables, reports, rating curves, and more, that show results of
the hydraulic calculations performed.

7. SEWERCAD
• Thousands of utilities and engineering
firms around the world trust SewerCAD
for sanitary sewer modelling and design
to minimize capital investments.

8. SEWERGEMS(SEWER MANAGEMENT)
• SewerGEMS streamlines the modelling
process, so more time for solving wastewater
engineering problems, such as improving
capacity and limiting sewer overflows, which
ultimately enable utilities to comply with sewer
regulations set by regulatory agencies.
• For more than three decades, SewerGEMS has
provided utilities and wastewater professionals
with advanced engineering tools to plan,
design, maintain, and operate sanitary and
combined sewer systems, including:

9. • Engineering decision guidance tools: SewerGEMS’ , scenario management
tools to gain a better understanding of the behaviour of wastewater system,
improving decision making and response time.
• Improved model accuracy:
• A well calibrated model decreases the risks of making poor decisions by ensuring
that the model uses the best available data.
• SewerGEMS calibration tools such as SCADA (supervisory control and data
acquisition) integration enable engineer to rely on his model results.
SewerGEMS(sewer management)

10. SEWERGEMS(SEWER
MANAGEMENT)
• Increased information mobility:
• SewerGEMS’ full GIS, CAD, and SCADA interoperability enables the cost-
effective sharing and flow of information between utilities’ design,
engineering, GIS, and operation departments, and their consultants.
• It also can leverage the data that the utility invested in once and reuse across
departments.
• SewerGEMS is a superset of SewerCAD.

12. CAPABILITIES
 Allocate and estimate sanitary
loads
 Allocate and estimate storm
water loads
 Analyze hydraulics and
combined sewer overflows
 Analyze hydrogen sulfide
formation
 Analyse inlet capacities
 Build and manage hydraulic models
 Design sanitary sewers
 Design and analyze culverts.
 Design and analyze low impact development
controls
 Simulate water quality
 Design storm water systems
 Design and analyze pond and outlets

13. CIVILSTORM
• CivilStorm provides an easy-to-
use environment for engineers
to analyse, design, and operate
storm water systems.

14. CIVILSTORM
• Storm water systems can be very complex to model, with flow backups and
reversals, surcharged pipes, and more. CivilStorm is one solution for all your
storm water modeling needs.
• Detect system bottlenecks, improve capacity, and limit storm water flooding,
so you can comply with storm water regulations
• Minimize capital investments on your infrastructure with optimized network
designs and master plans for your entire system.

15. CIVILSTORM
• CivilStorm performs analysis of all aspects of storm water systems: rainfall, runoff, inlet
capture and bypass, gravity and pressure piping, ponds, outlet structures, open channels,
culverts, and more. It provides:
• Comprehensive storm water modeling: Analyze pressure and free-surface flow conditions for
networks of channels and closed conduits; model complex pond outlets for a variety of tail
water conditions; and use weirs, orifices, culverts, risers, and inlet boxes in your design.
• Effortless design: CivilStorm recommends the most cost-effective pipe sizes and invert
elevations, while meeting design restrictions. It guides you through the complex pond and
outlet design process and streamlines complicated culvert hydraulics.
• Streamlined model building and management: Leverage and import virtually any external
data format to jump-start the model. Then, manipulate the model data effectively, with the
ability to use a multitude of data entry and model editing tools that simplify and shorten the
modeling process.
• CivilStorm is a superset of StormCAD and a subset of SewerGEMS.

17. CAPABILITIES
 Allocate and estimate storm water loads
 Analyze inlet capacities
 Build and manage hydraulic models
 Design and analyze culverts Design and analyze low impact
development controls
 Design and analyze pond and outlets
 Design storm water systems.
 Simulate hydraulics using multiple solvers
 Simulate water quality

18. STORMCAD
• StormCAD provides storm water
professionals with advanced tools to
effectively deliver high-quality storm
sewer design with lower capital
investment.

19. STORMCAD
• Storm Sewer Analysis and Design Software
• In challenging times, budgets for infrastructure projects are tight.
StormCAD helps you be as effective as possible on storm sewer
development projects. The software provides roadway and site
designers, storm water master planners, and land developers like
you with advanced tools to effectively deliver high quality design
with minimized capital investments.

20. STORMCAD
• StormCAD offers a complete approach to storm sewer design and analysis, from rainfall to
outlet:
• Effortless storm sewer design: Automatically design gravity piping and structures. Enter your
design constraints for StormCAD to automatically determine cost-effective pipe sizes and
invert elevations while minimizing pipe cover to avoid unnecessary pipe trench excavation.
• Streamlined model building and management: Leverage and import virtually any external
data format to jump-start the model. Then, manipulate the model data effectively, with the
ability to use a multitude of data entry and model editing tools that simplify and shorten the
modeling process
• Improved design productivity: With StormCAD’s ability to run from within MicroStation or
AutoCAD, model in a platform that you may be more familiar with and take advantage of CAD
environments and tools (e.g., superior layout, drafting capabilities). Or choose to model storm
sewers in StormCAD’s stand-alone interface.
• StormCAD is a subset of CivilStorm and SewerGEMS.

21. CAPABILITIES
•Allocate and estimate storm water loads
•Analyze inlet capacities
•Build and manage hydraulic models
•Design and analyze culverts
•Design storm water systems

22. PONDPACK
• Effectively analyse and design
detention and retention
facilities, outlet structures, and
channels.

23. PONDPACK(DETENTION POND
ANALYSIS AND DESIGN SOFTWARE)
• From basic site designs to complex drainage studies, you can effectively model rainfall and
runoff from urban and rural watersheds to design detention and retention facilities, outlet
structures, and channels. The intuitive and easy-to-use interface simplifies detention pond
design while the robust calculation engine handles the complexity of interconnected pond
modeling.
• With PondPack, you have the best of both worlds: Improved design productivity
• Delivery of high-quality pond design projects.

24. PONDPACK(DETENTION POND
ANALYSIS AND DESIGN SOFTWARE)
• Gain increased workflow efficiency and streamline the planning, design, and engineering of
your next storm water system project through:
Simple step-by-step pond and outlet design: Easily manage the sequence of steps required to
take a pond from blank page to final design. PondPack's PondMaker guides you through the
confusing maze of pond design steps by providing a step-by-step process that provides
constant feedback on how the design is progressing.
• Streamlined model building and management: Leverage and import virtually any external
data format to jumpstart the model. Then you can manipulate the model data effectively, with
the ability to use a multitude of data entry and model editing tools that simplify and shorten
the modeling process.
• Improved understanding of real-world situations: Model complex pond scenarios with
confidence, including simulating tidal and tailwater effects in interconnected ponds.
• PondPack is a subset of CivilStorm and SewerGEMS.

25. CAPABILITIES
•Build and manage hydraulic models
•Design and analyze culverts.
•Design and analyze pond and outlets
•Model rainfall and runoff
-

26. RESERVOIR SIMULATION
SOFTWARE

27. BOAST - BLACK OIL APPLIED
SIMULATION TOOL (BOAST)
• Boast is an IMPES numerical simulator (finite-difference implicit
pressure-explicit saturation) which finds the pressure distribution
for a given time step first then calculates the saturation distribution
for the same time step isothermal.
• The last release was in 1986 but it remains as a good simulator for
educational purposes.

29. MRST - THE MATLAB
RESERVOIR SIMULATION
TOOLBOX (MRST)
 The toolbox consists of two main parts: a core
offering basic functionality and single and two-
phase solvers, and a set of add-on modules
offering more advanced models, viewers and
solvers.
 MRST is mainly intended as a toolbox for rapid
prototyping and demonstration of new simulation
methods and modeling concepts on unstructured
grids.
 Despite this, many of the tools are quite efficient
and can be applied to surprisingly large and
complex models

30. OPM - THE OPEN POROUS
MEDIA (OPM)
• The Open Porous Media (OPM) initiative provides a set of open-
source tools centred on the simulation of flow and transport of fluids
in porous media.

31. RESERVOIR SOFTWARE
CAPABILITIES
To compute reservoir capacity using Sequent Peak algorithm.
To interpolate Elevation-Area-Capacity table for any elevation interval.
To determine the firm power from a reservoir or to simulate the operation
of a hydropower project.
To simulate the operation of a multi-purpose multi reservoir system for
conservation purposes.
To carry out flow routing through a reservoir using the hydrologic routing
methods.
To determine the reservoir operation policy using Stretched Thread
method.
To determine the rule curve levels using mass balance approach.
To determine the required reservoir storage for a given yield or vice versa.

32. GENERAL SOFTWARE
• JUPITER API (DOS/Win) Version 1.7.3, 2013/8/6
The Joint Universal Parameter IdenTification and Evaluation of Reliability
Application Programming Interface
• LIBANNE (DOS/Sun) Version 4.0, 2002/02/25
A collection of related libraries for use in hydrologic applications
• LIBHSP Version 11.1
A collection of related libraries for the Hydrological Simulation Program--
Fortran (HSPF)

33. GENERAL SOFTWARE
• LIBUTL (DOS/DG/Sun) Version 6.0, 1997/02/05
Utility libraries for interactive prompting, device-independent graphics, and
time-dependent data base access
• MMA (Sun/DOS) Version 1.210, 2011/09/01
A computer code for analysis of multiple models of the same system using the
same observations for calibration
• ModelMate (DOS/Win) Version 1.0.3, 2016/2/16
A graphical user interface (GUI) for model analysis.
• ModelMate supports UCODE_2005 or UCODE_2014 (UCODE), MODFLOW-
2005 (MODFLOW), and ModelMuse.

34. GENERAL SOFTWARE
• NWIS Web Services Snapshot Tool for ArcGIS (Win) Version 2.0, 2012/06/06
ArcMap add-in for retrieving and managing data from NWIS Web Services
• OPR-PPR (Win/DOS) Version 1.01, 2016/01/31
A Computer Program for Assessing Data Importance to Model Predictions Using
Linear Statistics
• Scenario Tools: Scenario Manager and Scenario Analyzer (DOS/Win) Version 1.0.0,
2014/04/15
Scenario Tools: Scenario Manager and Scenario Analyser, Graphical user interfaces for
managing and analysing MODFLOW groundwater model scenarios.

35. GENERAL SOFTWARE
• SYSDOC (DG) Version 1.0, 1996/03/01
System Documentation for Fortran Source Code
• TDDS (DOS/DG/Sun) Version 6.0, 1997/03/06
Time-Dependent Data System for Simulation Models
• UCODE_2014 (DOS/UNIX) Version 1.004, 2016/02/18
A computer code for universal inverse modeling.

36. WATER RESOURCES STATISTICS
SOFTWARE
• This software and related material (data and documentation) are made
available by the U.S. Geological Survey (USGS) to be used in the public interest
and the advancement of science.

37. STATISTICS SOFTWARE
GNWISQ (Windows) Version 1.1, 2014/09/15
Obtaining and analysing daily mean streamflow data
HydroClimATe (WIN) Version 1.0.0, 2014/03/07
Computer program for assessing the relations among variable climatic and hydrologic time-
series data
HyDroDSS (Windows) Version 1.0.0.0, 2014/03/27
Hydrologic Drought Decision Support System

38. STATISTICS SOFTWARE
JUPITER API (DOS/Win) Version 1.7.3, 2013/8/6
The Joint Universal Parameter IdenTification and Evaluation of Reliability Application
Programming Interface
KTRLine (Win) Version 1.0, 2010/01/11
Kendall-Theil Robust Line
LOADEST (Linux/Unix/Win)
Homepage for LOADEST software distributed by the U.S. Geological Survey

39. STATISTICS SOFTWARE
MkDF (Windows) Version 1.0, 2009/12/15
Obtaining and analysing daily mean streamflow data
MkPP (Windows) Version 1.0, 2009/12/15
Obtaining and analysing daily mean streamflow data
NSS (Win) Version 6.1, 2015/05/06
National Streamflow Statistics program

40. STATISTICS SOFTWARE
• OPR-PPR (Win/DOS) Version 1.01, 2016/01/31
A Computer Program for Assessing Data Importance to Model Predictions Using Linear
Statistics
• QSTATS (Windows) Version 1.1, 2014/09/15
Obtaining and analysing daily mean streamflow data
• SEDSIZE (DOS/DG/Sun) Version 1.9, 1997/06/02
Particle-size statistics of fluvial sediments

41. STATISTICS SOFTWARE
• SELDM (Win) Version 1.0.0.0, 2013/03/27
Stochastic empirical loading and dilution model
• SREF (Windows) Version 1.0, 2009/12/15
Obtaining and analysing daily mean streamflow data
• StreamStats (online) Version 2, 2011/01/07
StreamStats streamflow statistics web application

42. STATISTICS SOFTWARE
SWSTAT (DOS/Sun) Version 4.1, 2002/02/25
Surface-Water Statistics
USGS Library for S-PLUS (Win) Version 4.0, 2011/07/13
A collection of functions, dialogs, and datasets for use in hydrologic applications
WREG (Win) Version 1.05, 2013/05/08
Weighted-multiple-linear REGression

43. SURFACE WATER SOFTWARE
• ANNIE (DOS/Sun) Version 4.1, 2002/02/25
Interactive Hydrologic Analyses and Data Management
• BRANCH (DOS/DG/Sun) Version 4.3, 1997/06/05
Branch-Network Dynamic Flow Model
• BSDMS (DOS/DG) Version 2.1, 1996/03/01
Bridge Scour Data Management System
• CAP (Win/Mac/DOS/Sun) Version 2.0 and 1.0, 2013/07/31
Culvert Analysis Program

44. SURFACE WATER SOFTWARE
• CGAP (DOS/DG/Sun) Version 3.5, 1995/10/06
Channel Geometry Analysis Program
• CRT (Win) Version 1.1.1, 2013/09/06
Cascade Routing Tool to Define and Visualize Flow Paths for Grid-Based Watershed
Models
• DR3M (DOS/DG) Version 2.1, 1996/03/01
Distributed Routing Rainfall-Runoff Model
• feq (DOS/Sun) Version 4.1
Interactive Hydrologic Analyses and Data Management

45. SURFACE WATER SOFTWARE
• FEQ (DOS) Version 10.60, 2009/03/31
Full EQuations Model
• FESWMS-2DH (DG) Version 1.10.DG1, 1995/06/07
Finite-element surface-water modeling system for two-dimensional flow in the
horizontal plane
• FourPt (DG/Sun) Version 95.01, 1997/06/04
An unsteady, one-dimensional, open-channel flow model
• GCLAS (Unix/Win) Version 1.06c, 2016/04/25
Graphical Constituent Loading Analysis System

46. SURFACE WATER SOFTWARE
• GenScn (Win) Version 1.0, 1998/08/14
GENeration and analysis of model simulation SCeNarios
• GLSNet (DOS/DG) Version 4.0, 2005/01/27
Regional hydrologic regression and NETwork analysis using Generalized Least Squares
• GNWISQ (Windows) Version 1.1, 2014/09/15
Obtaining and analysing daily mean streamflow data

47. SURFACE WATER SOFTWARE
• SEDSIZE (DOS/DG/Sun) Version 1.9, 1997/06/02
Particle-size statistics of fluvial sediments
• SPARROW (Win/Sun) Version 2.6, 2006/08/09
SPAtially Referenced Regressions On Watershed attributes
• SREF (Windows) Version 1.0, 2009/12/15
Obtaining and analysing daily mean streamflow data from the U.S. Geological Survey National
Water Information System Web Site: Streamflow Record Extension Facilitator
• StreamStats (online) Version 2, 2011/01/07
StreamStats streamflow statistics web application

48. GEOCHEMICAL SOFTWARE
• OTEQ (Linux/Unix)
Homepage for OTEQ software distributed
• OTIS (Linux/Sun/Unix/Win), 1998/04/20
One-dimensional transport with inflow and storage (OTIS): A solute transport model for streams
and rivers
• PHAST (Linux/Win) Version 2.4.6-8538, 2014/03/24
A program for simulating ground-water flow, solute transport, and multicomponent geochemical
reactions

49. GEOCHEMICAL SOFTWARE
• Alkalinity Calculator (online) Version 2.20
The Alkalinity Calculator will analyze the titration curve and calculate the alkalinity or acid
neutralizing capacity (ANC) of a sample
• BIOMOC (DOS/DG/SGI/Sun) Version 1.0, 1999/03/10
A multispecies solute-transport model with biodegradation
• BLTM (DG) Version 1.2, 1996/11/04
Branched Lagrangian Transport Model

50. GEOCHEMICAL SOFTWARE
• GAMACTT (online) Version 1.0, 2014/08/28
'Groundwater Age Mixtures and Contaminant Trends Tool' is an interactive educational webtool
illustrating effects of groundwater age distributions on nonpoint-source contamination responses
of wells and groundwater discharges.
• GW_Chart (Windows) Version 1.29.0.0, 2015/10/29
GW_Chart: a program for creating specialized graphs used in groundwater studies.
• HST3D (Unix/Linux/Win) Version 2.2.16, 2010/10/21
Three-dimensional flow, heat, and solute transport model
• KTRLine (Win) Version 1.0, 2010/01/11
Kendall-Theil Robust Line

51. GEOCHEMICAL SOFTWARE
• PHREEQC (Mac/Linux/Win) Version 3.2.0-9820, 2015/06/10
A Computer Program for Speciation, Batch-Reaction, One-Dimensional Transport, and Inverse
Geochemical Calculations.
• PhreeqcI (Win) Version 3.2.0-9820, 2015/06/10
Graphical user interface for PHREEQC

52. GEOCHEMICAL SOFTWARE
• SELDM (Win) Version 1.0.0.0, 2013/03/27
Stochastic empirical loading and dilution model
• SPREADBAL-2002
Documentation for the mineral mass balance spreadsheet referenced in Bowser and Jones
(2002) American Journal of Science v. 302 p. 582-662.
• SUTRA and related programs
2D, 3D, variable-density, variably-saturated flow, solute or energy transport

53. RECENTLY UPDATED
SOFTWARE
• Groundwater_Toolbox (WIN) Version 1.2.0, 2016/10/01
A graphical and mapping interface for analysis of hydrologic data. Includes the hydrograph-
analysis programs BFI, HYSEP, PART, and RORA (with RECESS).
• GSFLOW (Linux/Win) Version 1.2.1, 2016/10/01
Coupled Groundwater and Surface-water FLOW model based on the USGS Precipitation-
Runoff Modeling System (PRMS) and Modular Groundwater Flow Model (MODFLOW-2005)

54. RECENTLY UPDATED
SOFTWARE
• ModelMuse (Windows) Version 3.8.1.0, 2016/8/26
ModelMuse: A Graphical User Interface for MODFLOW-2005, MODFLOW-LGR, MODFLOW-
LGR2, MODFLOW-NWT, MODFLOW-CFP, MODFLOW-OWHM, MT3DMS, SUTRA, PHAST,
MODPATH, and ZONEBUDGET
• MODFLOW-NWT (WIN) Version 1.1.2, 2016/09/15
A Newton-Raphson formulation for MODFLOW-2005 to improve solution of unconfined
groundwater-flow problems

55. RECENTLY UPDATED
SOFTWARE
• PART (Win) Version 2.0, 2016/08/22
A computerized method of base-flow-record estimation
• RECESS (Win) Version 2.0, 2016/08/22
A computer program for analysis of streamflow recession
• RORA (Win) Version 2.0, 2016/08/22
The recession-curve-displacement method for estimating recharge

56. THANK YOU