Hydraulic accumulator
•Download as PPTX, PDF•
2 likes•725 views
A hydraulic accumulator is a device that stores pressurized liquid energy for sudden energy requirements. It stores hydraulic energy in the form of pressure that can be used, for example, when a lift or crane is moving upward. The accumulator's capacity is the maximum amount of hydraulic energy it can store, which is calculated as the product of the pressure supplied by the pump, the area of the sliding ram, and the stroke or lift of the ram.
Report
Share
Report
Share
Recommended
2. hydroelectric plant
The document discusses hydroelectric power plants. It describes how hydroelectric plants harness the kinetic and potential energy of flowing water to generate electricity. The key components of a hydroelectric plant include a reservoir for water storage, a dam, penstocks to carry water to the turbines, and a powerhouse containing the turbines and generators. Hydroelectric plants convert the energy of falling or flowing water into rotational energy to drive the generators and produce electric power.
Development of prototype turbine model for ultra-low head hydro power potenti...
Clean source of energy is playing very vital role in today’s eco-friendly environment. Potential
energy available with water can be converted into useful work by maintaining the purpose of clean environment.
Hydro-power plant utilises the energy of water and can produce equivalent mechanical output. Hydro-electric
power plants are much more reliable and efficient as a renewable and clean source than the fossil fuel power
plants. The rivers in Western Maharashtra region flows from Sahyadri mountain towards Deccan platue with
steady gradient. In recent years, the environmental impacts are becoming difficult for developers to build new
dams because of opposition from environmentalists and people living on the land to be flooded. Therefore the
need has arisen to go for the small scale hydro power plants in the range of mini (few MW) and micro hydro
(kW) power plants. This paper discusses the conceptual design and development of a micro hydro power plant.
The developed model can be used at sites having head range of 0.5 to to 6 m. The required information was
collected from meteorological department and irrigation department of Kolhapur division of Government of
Maharashtra, India.
POWER PLANT ECONOMICS AND ENVIRONMENTAL CONSIDERATIONS - SNIST
This document discusses various topics related to power plant economics and environmental considerations. It covers cost analysis including fixed costs like land, equipment, interest, depreciation, and operational costs like fuel, labor, maintenance. It also discusses factors affecting power plant design, load curves, and terms used in the power industry. Finally, it covers major pollutants from fossil fuel and nuclear power plants and methods to control emissions.
Hydropower plant
- A water reservoir stores water collected from rainfall and streams behind a dam. The stored water supplies a hydroelectric plant.
- Dams help store incoming water and increase its "head" or pressure to generate more power. Spillways allow excess water to flow safely past dams.
- Water flows through pressurized penstocks to turbines, which convert the water's energy to mechanical energy powering generators. Generators increase the voltage for transmission through power lines.
Presentation on NHPC (TLDP-III)
This document summarizes an industrial seminar presentation about the Teesta Low Dam Project-III (TLDP-III) hydroelectric power plant in India. The presentation describes the key components and technical specifications of the TLDP-III plant, including the barrage, power house, turbines, generators, transformers, switchgear, substation, dewatering/drainage systems, and protection systems. It notes that TLDP-III has a total installed capacity of 132 MW generated by 4 turbines of 33 MW each. The presentation concludes by thanking the audience and emphasizing the value of the industrial training experience.
Qt464972qm
This document summarizes an experimental investigation into design parameters for pico-hydro Turgo turbines. The researchers built a low-cost Turgo turbine using readily available materials. They then tested the turbine and developed a regression model to predict its efficiency based on design parameters like nozzle diameter, jet inlet angle, number of blades, and blade speed. The goal was to establish empirical design guidelines that allow for the custom design and local manufacture of efficient yet low-cost Turgo turbines optimized for specific pico-hydro sites. Key parameters like jet inlet angle, nozzle diameter, number of blades, and blade speed were investigated to determine their effects on turbine efficiency.
11 426-151730323021-26
This document discusses a study on using 1kW pico Turgo water turbines powered by rainwater collected on the rooftop of a 21-meter high building in Thailand. The rooftop was modified to store up to 60 cubic meters of rainwater annually, providing an adequate head and flow to run a pico turbine. A prototype turbine with 24 buckets and a 430mm diameter runner was tested. With a 21-meter head, theoretical calculations estimated the turbine could generate 1,310 Watts, while experimental results showed 950 Watts of power output, for an efficiency of 72.51%. The study demonstrates the feasibility of utilizing otherwise wasted rooftop rainwater to generate electricity for public areas in high-rise buildings.
8e4c8e40fe7791598789e3589619cf9590b5
This paper discusses the design, implementation, and analysis of the overall performance of a micro hydro Turgo turbine. A Turgo turbine is analyzed due to its simple design, structure, easy production and low installation cost. The methodology uses Euler equations to analyze the turbine's characteristic parameters in various operating regimes through numerical calculations. The results from the numerical calculations will be compared to the performance of an existing real Turgo turbine. Based on the results, recommendations will be presented for improving the performance of micro hydro Turgo turbines.
Recommended
2. hydroelectric plant
The document discusses hydroelectric power plants. It describes how hydroelectric plants harness the kinetic and potential energy of flowing water to generate electricity. The key components of a hydroelectric plant include a reservoir for water storage, a dam, penstocks to carry water to the turbines, and a powerhouse containing the turbines and generators. Hydroelectric plants convert the energy of falling or flowing water into rotational energy to drive the generators and produce electric power.
Development of prototype turbine model for ultra-low head hydro power potenti...
Clean source of energy is playing very vital role in today’s eco-friendly environment. Potential
energy available with water can be converted into useful work by maintaining the purpose of clean environment.
Hydro-power plant utilises the energy of water and can produce equivalent mechanical output. Hydro-electric
power plants are much more reliable and efficient as a renewable and clean source than the fossil fuel power
plants. The rivers in Western Maharashtra region flows from Sahyadri mountain towards Deccan platue with
steady gradient. In recent years, the environmental impacts are becoming difficult for developers to build new
dams because of opposition from environmentalists and people living on the land to be flooded. Therefore the
need has arisen to go for the small scale hydro power plants in the range of mini (few MW) and micro hydro
(kW) power plants. This paper discusses the conceptual design and development of a micro hydro power plant.
The developed model can be used at sites having head range of 0.5 to to 6 m. The required information was
collected from meteorological department and irrigation department of Kolhapur division of Government of
Maharashtra, India.
POWER PLANT ECONOMICS AND ENVIRONMENTAL CONSIDERATIONS - SNIST
This document discusses various topics related to power plant economics and environmental considerations. It covers cost analysis including fixed costs like land, equipment, interest, depreciation, and operational costs like fuel, labor, maintenance. It also discusses factors affecting power plant design, load curves, and terms used in the power industry. Finally, it covers major pollutants from fossil fuel and nuclear power plants and methods to control emissions.
Hydropower plant
- A water reservoir stores water collected from rainfall and streams behind a dam. The stored water supplies a hydroelectric plant.
- Dams help store incoming water and increase its "head" or pressure to generate more power. Spillways allow excess water to flow safely past dams.
- Water flows through pressurized penstocks to turbines, which convert the water's energy to mechanical energy powering generators. Generators increase the voltage for transmission through power lines.
Presentation on NHPC (TLDP-III)
This document summarizes an industrial seminar presentation about the Teesta Low Dam Project-III (TLDP-III) hydroelectric power plant in India. The presentation describes the key components and technical specifications of the TLDP-III plant, including the barrage, power house, turbines, generators, transformers, switchgear, substation, dewatering/drainage systems, and protection systems. It notes that TLDP-III has a total installed capacity of 132 MW generated by 4 turbines of 33 MW each. The presentation concludes by thanking the audience and emphasizing the value of the industrial training experience.
Qt464972qm
This document summarizes an experimental investigation into design parameters for pico-hydro Turgo turbines. The researchers built a low-cost Turgo turbine using readily available materials. They then tested the turbine and developed a regression model to predict its efficiency based on design parameters like nozzle diameter, jet inlet angle, number of blades, and blade speed. The goal was to establish empirical design guidelines that allow for the custom design and local manufacture of efficient yet low-cost Turgo turbines optimized for specific pico-hydro sites. Key parameters like jet inlet angle, nozzle diameter, number of blades, and blade speed were investigated to determine their effects on turbine efficiency.
11 426-151730323021-26
This document discusses a study on using 1kW pico Turgo water turbines powered by rainwater collected on the rooftop of a 21-meter high building in Thailand. The rooftop was modified to store up to 60 cubic meters of rainwater annually, providing an adequate head and flow to run a pico turbine. A prototype turbine with 24 buckets and a 430mm diameter runner was tested. With a 21-meter head, theoretical calculations estimated the turbine could generate 1,310 Watts, while experimental results showed 950 Watts of power output, for an efficiency of 72.51%. The study demonstrates the feasibility of utilizing otherwise wasted rooftop rainwater to generate electricity for public areas in high-rise buildings.
8e4c8e40fe7791598789e3589619cf9590b5
This paper discusses the design, implementation, and analysis of the overall performance of a micro hydro Turgo turbine. A Turgo turbine is analyzed due to its simple design, structure, easy production and low installation cost. The methodology uses Euler equations to analyze the turbine's characteristic parameters in various operating regimes through numerical calculations. The results from the numerical calculations will be compared to the performance of an existing real Turgo turbine. Based on the results, recommendations will be presented for improving the performance of micro hydro Turgo turbines.
300118 chapter 9 powerhouse planning
The document discusses powerhouse planning for hydroelectric projects. Key factors in determining a powerhouse location include proximity to the dam spillway and navigation locks, foundation conditions, and accessibility for transmission lines. The objectives of powerhouse planning are to house generators and turbines while considering whether to locate the structure above or below ground. Dimensions of the powerhouse depend on the size and number of units as well as space needed for equipment, loading areas, and control rooms. The powerhouse structure has sub, intermediate, and super sections to support equipment and transmit loads to the foundation.
Hyperloop
This document provides an overview of the Hyperloop transportation system proposed by Elon Musk. The Hyperloop aims to provide fast, inexpensive transportation for passengers and goods. It works by propelling pod-like capsules through low pressure tubes using magnetic levitation or air bearings, reaching top speeds of over 750 mph. The capsules would be accelerated using linear induction motors along the tube. Key components include the capsule, tube, and propulsion systems. The document discusses the technical aspects and challenges of the Hyperloop system and outlines its potential advantages over existing high-speed rail.
Hyperloop
Nirmal Gaur gives an overview of the Hyperloop transportation concept. The Hyperloop would use magnetic levitation to move passenger pods through a low-pressure tube at transonic speeds, allowing travel from Los Angeles to San Francisco in 30 minutes. It works by removing air from the tube and using linear induction motors and an air compressor to propel pods at up to 1220 km/hr. Advantages over existing high-speed rail include higher speeds, on-demand direct travel, and lower energy usage through solar power. Potential challenges include turning, land usage, passenger comfort, and vulnerability to terrorism. The first Hyperloop may be built between Mumbai and Pune in India.
Archimedes Screw as a Low Head Hydropower Generator
This document provides an overview of the Archimedean screw as a low head hydropower generator. It discusses the basic design and operation of Archimedean screws, including their rotating helical shape supported by bearings. Archimedean screws can operate at heads as low as 1 meter and flows up to 15 cubic meters per second. They typically have an efficiency around 80% and can tolerate debris well due to their large dimensions. The document also notes some advantages of Archimedean screws for hydropower such as their fish friendliness and simpler civil works compared to other turbine types.
Hyperloop ppt 1
The Hyperloop is a proposed new mode of transportation that would be both fast and inexpensive. It consists of a low-pressure tube with capsules that are accelerated via magnetic linear accelerators and transported at both low and high speeds throughout the length of the tube. The capsules would be powered using solar panels affixed to the tube, making it environmentally friendly and sustainable. Some advantages include less power consumption, flexibility, very low friction, and safety. However, it may not be suitable for common use given its complicated design. Early concepts of transporting people through tubes date back to 1812 and 1864.
An Introduction to Micro-Hydro Electric Power [Micro-HEP
Micro-hydro electric power (Micro-HEP) systems can be installed using three types of configurations: high head, medium head, and low head. The development process involves several stages from an initial desktop study through planning, permitting, construction, and commissioning. Simple calculations can assess the power potential based on head of water and flow rate. While micro-HEP installations have higher upfront costs than other renewable technologies, they provide a steady power output and can last over 50 years. Challenges include long planning and permitting processes as well as additional costs for fish passage infrastructure. Example projects illustrate the wide range of installation sizes, costs, and power outputs that micro-HEP can provide.
Industrial training report on NHPC TLD-III
A brief internship report of winter training on National Hydro Power Corporation Ltd. in session-2017-18.Teesta Low Dam III, Rambi, Darjeeling, W.B
Sanchit
This document provides an overview of maglev and hyperloop transportation technologies. It discusses how maglev trains use magnetic levitation to float above a guideway, with two main types being electromagnetic suspension (EMS) and electrodynamic suspension (EDS). The hyperloop concept proposes using linear induction motors and air bearings in low pressure tubes to enable passenger or cargo capsules to travel at faster-than-airline speeds. Key components of a hyperloop system include the low pressure tube, capsules for passengers/cargo, propulsion via linear accelerators along the tube, and an air bearing suspension system to support the capsules with minimal friction.
Kotmale power station
The Kotmale Power Plant is a major hydroelectric power station in Sri Lanka's Mahaweli Complex. It has an installed capacity of 3 * 67 MW generated from three underground power stations and contributes around 445 GWh annually. Water is collected from a rock fill dam with a spill level of 704m and fed through long penstocks and surge chambers to maintain constant pressure. The plant uses Francis vertical turbines connected to generators to produce electricity, which is stepped up and sent to the grid via a switchyard consisting of components like circuit breakers and transformers.
Compressed Air Wind Energy Storage
The document provides an overview of the Tulia CAES Bulk Electric Storage Project in Swisher County, Texas. It discusses that the project will use proven Compressed Air Energy Storage (CAES) technology to store electricity from the grid or renewable sources by compressing air and storing it underground. The stored air will later be used to power turbines and generate electricity when demand and prices are higher. The project is well-suited for the location due to favorable geology, proximity to wind resources, and ability to connect to the electric grid. It outlines the development progress achieved to date and remaining milestones, including drilling a test core in 2013 to further refine the underground storage cavern design.
Hyperloop
Hyperloop is a proposed method of high-speed ground transportation, proposed by Elon Musk, that would transport passengers at airline speeds but using magnetically levitated capsules or pods within a near-vacuum tube. The presentation details the Hyperloop system, which would use solar-powered electric propulsion and air bearings to enable estimated travel times between Los Angeles and San Francisco of just 30 minutes at speeds up to 800 mph. Key aspects include the tube design, low-pressure environment, linear motor accelerators, and potential stations along the proposed route between the two cities. However, some experts believe the estimated $6 billion cost is too low given the challenges of developing an entirely new transportation system.
VONK HPS Webinar
The document describes a hybrid power system (HPS) that combines renewable energy sources like solar and wind with energy storage batteries and can include an optional hydrogen storage unit. The power management system controls the flow of energy and can power offshore and onshore facilities. An HPS provides clean power with minimal maintenance, reducing costs while increasing reliability compared to traditional diesel-based systems.
Hyperloop sneha
The Hyperloop transportation system underwent its first public test on May 11, 2016. A startup called Hyperloop One conducted a test of the Hyperloop system's electric motor, reaching speeds of up to 300 mph. The Hyperloop was originally proposed by Elon Musk in 2013 as a system that could transport people between Los Angeles and San Francisco in only 30 minutes inside low-pressure pods that travel through tubes at nearly 760 mph.
A comparative study on river hydrokinetic turbines blade profiles
Diesel based electricity supply is the common practice in rural and isolated areas in the North of Brazil. The diesel fuel is usually transported from a nearby city as Manaus by river to these isolated communities. During wet seasons and inundations this means of transport is very risky and not usually safe. The hydrokinetic technology is among the promising technologies for most of the Amazon areas because of the large hydraulic capacity and low density population settlements. In this paper the authors propose a cheap hydrokinetic turbine system whose blades are easy to design, manufacture, replace when necessary and its operation is independent of flow direction. In this work CFD, RANS (Reynolds Average Navier Stokes) equations are used to characterize and develop a methodology of numerical simulation of a vertical axis hydrokinetic turbine. In the simulations, four blade profiles were investigated. The effects of the number of blades, blade profile and water flow velocity on the turbine torque and power coefficients were presented and discussed.
New microsoft power point presentation (2)
A hydraulic accumulator stores pressurized fluid that can then be released to perform tasks in a hydraulic system. It takes in a specific amount of fluid under pressure and stores it until it is needed. Accumulators provide energy storage, compensate for leakage, temperature fluctuations, and pressure shocks while damping vibrations. They allow for smaller pumps, lower installed power usage, less heat production, and an increased system lifespan. A hydraulic accumulator utilizes a compressible gas like nitrogen to store pressurized fluid by drawing fluid in when pressure increases and releasing it when pressure drops.
Hydraulic accumulator
The document discusses hydraulic accumulators, which store hydraulic energy as pressure energy to be supplied intermittently for applications requiring bursts of energy. It describes the basic components and working of a hydraulic accumulator, which consists of a cylinder containing a sliding ram that stores energy by lifting a weight as hydraulic fluid enters under pressure. The capacity of an accumulator depends on the pressure, area of the ram, and stroke/lift. Differential accumulators store energy at higher pressures using a smaller ram area and annular space between cylinders.
Hydraulic accumulator
The hydraulic accumulator stores energy from liquid pressure by using a sliding ram inside a chamber. The accumulator's capacity, or maximum stored energy, is calculated as the product of the pressure supplied to the pump, the area of the ram, and the stroke or lift of the ram. By lifting the ram, pressure energy is stored equal to the pressure times the volume of the accumulator chamber. The accumulator allows this pressure energy to be released later to power hydraulic systems.
Hydraulic accumulator
1. Introduction 1.1 History of hydraulic accumulator 2. Types of hydraulic accumulator 2.1 Tower type accumulator 2.2 Raised weight accumulator 2.3 Spring-type accumulator 2.4 Compressed-gas accumulator a) Bladder type accumulator b) Diaphragm type c) Piston type accumulator d) Metal bellow type 3. Hydraulic symbols 4. Functions. 5. Design consideration 5.1 calculations 5.2 calculation of useful volume 6. Applications 6.1 Injection molding machine hydraulic circuit 6.2 Leakage Oil Compensation hydraulic circuit 6.3 Shortening of Stroke Time hydraulic circuit 7. Conclusion
Gear pump
Gear pumps use meshing gears to pump fluids through displacement. There are two main types: external gear pumps which use two external spur gears, and internal gear pumps which use one external and one internal spur gear. Gear pumps are positive displacement pumps that pump a constant volume of fluid per revolution. External gear pumps are commonly used for lubrication and fuel transfer and internal gear pumps can handle high viscosity fluids like asphalt or chocolate. Both have advantages like precision and constant output, but also limitations like fixed flow rates and moderate pressure ranges.
Week 2 3_hydraulic_pump
This document discusses different types of hydraulic pumps, including their basic operating principles and comparisons. It provides equations to calculate pump parameters such as theoretical flow rate, volumetric displacement, efficiency, and torque. For example, it defines that positive displacement pumps capture and transfer fixed amounts of fluid, while centrifugal pumps impart velocity to fluid to create pressure. Gear pump displacement can be calculated based on gear dimensions. Pump efficiency is affected by factors like leakage and viscosity.
Gear Pumps
This document discusses gear pumps, including their operation, types, maintenance, and uses. It begins by defining pumps as devices that add energy to fluids to move them from one point to another. It then explains that gear pumps are a type of rotary, positive displacement pump that uses meshing gears to pump liquids. The document describes how gear pumps work by trapping liquid between gear teeth and casing as the gears rotate. It also discusses gear pump components, maintenance like checking clearances and changing seals, the use of relief valves for safety, and applications like pumping fuels and lubricants.
Hydraulic accumulator presentation by vikas
This document summarizes hydraulic accumulators. It discusses the history of accumulators beginning in 1846. There are four main types: tower, raised weight, compressed gas, and spring. Accumulators store energy and provide functions like shock absorption, leakage compensation, and improved response times. Design considerations include volume, pressure, and flow rates. Accumulators are used in applications like machinery, mining, construction and vehicles. Benefits include lower costs, less maintenance, improved performance, and reduced noise and energy usage.
More Related Content
What's hot
300118 chapter 9 powerhouse planning
The document discusses powerhouse planning for hydroelectric projects. Key factors in determining a powerhouse location include proximity to the dam spillway and navigation locks, foundation conditions, and accessibility for transmission lines. The objectives of powerhouse planning are to house generators and turbines while considering whether to locate the structure above or below ground. Dimensions of the powerhouse depend on the size and number of units as well as space needed for equipment, loading areas, and control rooms. The powerhouse structure has sub, intermediate, and super sections to support equipment and transmit loads to the foundation.
Hyperloop
This document provides an overview of the Hyperloop transportation system proposed by Elon Musk. The Hyperloop aims to provide fast, inexpensive transportation for passengers and goods. It works by propelling pod-like capsules through low pressure tubes using magnetic levitation or air bearings, reaching top speeds of over 750 mph. The capsules would be accelerated using linear induction motors along the tube. Key components include the capsule, tube, and propulsion systems. The document discusses the technical aspects and challenges of the Hyperloop system and outlines its potential advantages over existing high-speed rail.
Hyperloop
Nirmal Gaur gives an overview of the Hyperloop transportation concept. The Hyperloop would use magnetic levitation to move passenger pods through a low-pressure tube at transonic speeds, allowing travel from Los Angeles to San Francisco in 30 minutes. It works by removing air from the tube and using linear induction motors and an air compressor to propel pods at up to 1220 km/hr. Advantages over existing high-speed rail include higher speeds, on-demand direct travel, and lower energy usage through solar power. Potential challenges include turning, land usage, passenger comfort, and vulnerability to terrorism. The first Hyperloop may be built between Mumbai and Pune in India.
Archimedes Screw as a Low Head Hydropower Generator
This document provides an overview of the Archimedean screw as a low head hydropower generator. It discusses the basic design and operation of Archimedean screws, including their rotating helical shape supported by bearings. Archimedean screws can operate at heads as low as 1 meter and flows up to 15 cubic meters per second. They typically have an efficiency around 80% and can tolerate debris well due to their large dimensions. The document also notes some advantages of Archimedean screws for hydropower such as their fish friendliness and simpler civil works compared to other turbine types.
Hyperloop ppt 1
The Hyperloop is a proposed new mode of transportation that would be both fast and inexpensive. It consists of a low-pressure tube with capsules that are accelerated via magnetic linear accelerators and transported at both low and high speeds throughout the length of the tube. The capsules would be powered using solar panels affixed to the tube, making it environmentally friendly and sustainable. Some advantages include less power consumption, flexibility, very low friction, and safety. However, it may not be suitable for common use given its complicated design. Early concepts of transporting people through tubes date back to 1812 and 1864.
An Introduction to Micro-Hydro Electric Power [Micro-HEP
Micro-hydro electric power (Micro-HEP) systems can be installed using three types of configurations: high head, medium head, and low head. The development process involves several stages from an initial desktop study through planning, permitting, construction, and commissioning. Simple calculations can assess the power potential based on head of water and flow rate. While micro-HEP installations have higher upfront costs than other renewable technologies, they provide a steady power output and can last over 50 years. Challenges include long planning and permitting processes as well as additional costs for fish passage infrastructure. Example projects illustrate the wide range of installation sizes, costs, and power outputs that micro-HEP can provide.
Industrial training report on NHPC TLD-III
A brief internship report of winter training on National Hydro Power Corporation Ltd. in session-2017-18.Teesta Low Dam III, Rambi, Darjeeling, W.B
Sanchit
This document provides an overview of maglev and hyperloop transportation technologies. It discusses how maglev trains use magnetic levitation to float above a guideway, with two main types being electromagnetic suspension (EMS) and electrodynamic suspension (EDS). The hyperloop concept proposes using linear induction motors and air bearings in low pressure tubes to enable passenger or cargo capsules to travel at faster-than-airline speeds. Key components of a hyperloop system include the low pressure tube, capsules for passengers/cargo, propulsion via linear accelerators along the tube, and an air bearing suspension system to support the capsules with minimal friction.
Kotmale power station
The Kotmale Power Plant is a major hydroelectric power station in Sri Lanka's Mahaweli Complex. It has an installed capacity of 3 * 67 MW generated from three underground power stations and contributes around 445 GWh annually. Water is collected from a rock fill dam with a spill level of 704m and fed through long penstocks and surge chambers to maintain constant pressure. The plant uses Francis vertical turbines connected to generators to produce electricity, which is stepped up and sent to the grid via a switchyard consisting of components like circuit breakers and transformers.
Compressed Air Wind Energy Storage
The document provides an overview of the Tulia CAES Bulk Electric Storage Project in Swisher County, Texas. It discusses that the project will use proven Compressed Air Energy Storage (CAES) technology to store electricity from the grid or renewable sources by compressing air and storing it underground. The stored air will later be used to power turbines and generate electricity when demand and prices are higher. The project is well-suited for the location due to favorable geology, proximity to wind resources, and ability to connect to the electric grid. It outlines the development progress achieved to date and remaining milestones, including drilling a test core in 2013 to further refine the underground storage cavern design.
Hyperloop
Hyperloop is a proposed method of high-speed ground transportation, proposed by Elon Musk, that would transport passengers at airline speeds but using magnetically levitated capsules or pods within a near-vacuum tube. The presentation details the Hyperloop system, which would use solar-powered electric propulsion and air bearings to enable estimated travel times between Los Angeles and San Francisco of just 30 minutes at speeds up to 800 mph. Key aspects include the tube design, low-pressure environment, linear motor accelerators, and potential stations along the proposed route between the two cities. However, some experts believe the estimated $6 billion cost is too low given the challenges of developing an entirely new transportation system.
VONK HPS Webinar
The document describes a hybrid power system (HPS) that combines renewable energy sources like solar and wind with energy storage batteries and can include an optional hydrogen storage unit. The power management system controls the flow of energy and can power offshore and onshore facilities. An HPS provides clean power with minimal maintenance, reducing costs while increasing reliability compared to traditional diesel-based systems.
Hyperloop sneha
The Hyperloop transportation system underwent its first public test on May 11, 2016. A startup called Hyperloop One conducted a test of the Hyperloop system's electric motor, reaching speeds of up to 300 mph. The Hyperloop was originally proposed by Elon Musk in 2013 as a system that could transport people between Los Angeles and San Francisco in only 30 minutes inside low-pressure pods that travel through tubes at nearly 760 mph.
A comparative study on river hydrokinetic turbines blade profiles
Diesel based electricity supply is the common practice in rural and isolated areas in the North of Brazil. The diesel fuel is usually transported from a nearby city as Manaus by river to these isolated communities. During wet seasons and inundations this means of transport is very risky and not usually safe. The hydrokinetic technology is among the promising technologies for most of the Amazon areas because of the large hydraulic capacity and low density population settlements. In this paper the authors propose a cheap hydrokinetic turbine system whose blades are easy to design, manufacture, replace when necessary and its operation is independent of flow direction. In this work CFD, RANS (Reynolds Average Navier Stokes) equations are used to characterize and develop a methodology of numerical simulation of a vertical axis hydrokinetic turbine. In the simulations, four blade profiles were investigated. The effects of the number of blades, blade profile and water flow velocity on the turbine torque and power coefficients were presented and discussed.
What's hot (14)
Archimedes Screw as a Low Head Hydropower Generator
Archimedes Screw as a Low Head Hydropower Generator
An Introduction to Micro-Hydro Electric Power [Micro-HEP
An Introduction to Micro-Hydro Electric Power [Micro-HEP
A comparative study on river hydrokinetic turbines blade profiles
A comparative study on river hydrokinetic turbines blade profiles
Viewers also liked
New microsoft power point presentation (2)
A hydraulic accumulator stores pressurized fluid that can then be released to perform tasks in a hydraulic system. It takes in a specific amount of fluid under pressure and stores it until it is needed. Accumulators provide energy storage, compensate for leakage, temperature fluctuations, and pressure shocks while damping vibrations. They allow for smaller pumps, lower installed power usage, less heat production, and an increased system lifespan. A hydraulic accumulator utilizes a compressible gas like nitrogen to store pressurized fluid by drawing fluid in when pressure increases and releasing it when pressure drops.
Hydraulic accumulator
The document discusses hydraulic accumulators, which store hydraulic energy as pressure energy to be supplied intermittently for applications requiring bursts of energy. It describes the basic components and working of a hydraulic accumulator, which consists of a cylinder containing a sliding ram that stores energy by lifting a weight as hydraulic fluid enters under pressure. The capacity of an accumulator depends on the pressure, area of the ram, and stroke/lift. Differential accumulators store energy at higher pressures using a smaller ram area and annular space between cylinders.
Hydraulic accumulator
The hydraulic accumulator stores energy from liquid pressure by using a sliding ram inside a chamber. The accumulator's capacity, or maximum stored energy, is calculated as the product of the pressure supplied to the pump, the area of the ram, and the stroke or lift of the ram. By lifting the ram, pressure energy is stored equal to the pressure times the volume of the accumulator chamber. The accumulator allows this pressure energy to be released later to power hydraulic systems.
Hydraulic accumulator
1. Introduction 1.1 History of hydraulic accumulator 2. Types of hydraulic accumulator 2.1 Tower type accumulator 2.2 Raised weight accumulator 2.3 Spring-type accumulator 2.4 Compressed-gas accumulator a) Bladder type accumulator b) Diaphragm type c) Piston type accumulator d) Metal bellow type 3. Hydraulic symbols 4. Functions. 5. Design consideration 5.1 calculations 5.2 calculation of useful volume 6. Applications 6.1 Injection molding machine hydraulic circuit 6.2 Leakage Oil Compensation hydraulic circuit 6.3 Shortening of Stroke Time hydraulic circuit 7. Conclusion
Gear pump
Gear pumps use meshing gears to pump fluids through displacement. There are two main types: external gear pumps which use two external spur gears, and internal gear pumps which use one external and one internal spur gear. Gear pumps are positive displacement pumps that pump a constant volume of fluid per revolution. External gear pumps are commonly used for lubrication and fuel transfer and internal gear pumps can handle high viscosity fluids like asphalt or chocolate. Both have advantages like precision and constant output, but also limitations like fixed flow rates and moderate pressure ranges.
Week 2 3_hydraulic_pump
This document discusses different types of hydraulic pumps, including their basic operating principles and comparisons. It provides equations to calculate pump parameters such as theoretical flow rate, volumetric displacement, efficiency, and torque. For example, it defines that positive displacement pumps capture and transfer fixed amounts of fluid, while centrifugal pumps impart velocity to fluid to create pressure. Gear pump displacement can be calculated based on gear dimensions. Pump efficiency is affected by factors like leakage and viscosity.
Gear Pumps
This document discusses gear pumps, including their operation, types, maintenance, and uses. It begins by defining pumps as devices that add energy to fluids to move them from one point to another. It then explains that gear pumps are a type of rotary, positive displacement pump that uses meshing gears to pump liquids. The document describes how gear pumps work by trapping liquid between gear teeth and casing as the gears rotate. It also discusses gear pump components, maintenance like checking clearances and changing seals, the use of relief valves for safety, and applications like pumping fuels and lubricants.
Hydraulic accumulator presentation by vikas
This document summarizes hydraulic accumulators. It discusses the history of accumulators beginning in 1846. There are four main types: tower, raised weight, compressed gas, and spring. Accumulators store energy and provide functions like shock absorption, leakage compensation, and improved response times. Design considerations include volume, pressure, and flow rates. Accumulators are used in applications like machinery, mining, construction and vehicles. Benefits include lower costs, less maintenance, improved performance, and reduced noise and energy usage.
Viewers also liked (8)
Recently uploaded
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Recently uploaded (20)
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Hydraulic accumulator
- 2. Hydraulic accumulator • The hydraulic accumulator is device used for storing the energy of a liquid in the form of pressure energy . • This energy may be supplied for any sudden requirement . • Use energy when lift or crane is moving upward .
- 3. Capacity of hydraulic accumulator
- 4. # Capacity is the maximum amount of hydraulic energy stored in accumulator . A = area of sliding ram L = stroke or lift of ram p = water pressure supplied by pump W = weight placed on the ram + weight of ram W = p*A Work done in lifting the ram =W*L = p*A*L