hybridwind-solarenergysystem-120907123454-phpapp02.pdf
•
0 likes•1 view
(1) This document presents a new hybrid wind/solar energy system configuration that allows the two sources to supply the load separately or simultaneously depending on availability. (2) Individual wind and solar energy have intermittent and unreliable output, but combining the two sources into a hybrid system and using maximum power point tracking improves efficiency and reliability. (3) The hybrid system uses an MPPT algorithm to maximize power transfer from both the wind and solar sources and provides a more consistent supply to meet load demands.
Report
Share
Report
Share
Download to read offline
Recommended
Hybrid wind solar energy system
The document discusses a hybrid wind/solar energy system that allows the two intermittent energy sources to supply power separately or together through a new rectifier configuration. It notes the disadvantages of relying solely on solar or wind energy alone due to unpredictability, but explains how combining the two sources into a hybrid system and using maximum power point tracking algorithms can significantly improve the reliability and efficiency of power transfer.
Design of Hybrid Power Plant for Smart City
Energy crisis are of special attention now-a-days. In this project presents a new system configuration of the front-end rectifier stage for a hybrid Hydro/wind/photovoltaic energy system. This system allows the three sources to supply the load separately or simultaneously depending on the availability of the energy sources. In household power generation wind and solar are the general hybrid energy options, which are used. But the overhead water tank is one of the neglected energy generation sources which are available in normal household and commercial places. In today’s world each and every source of energy has to be utilized. Therefore we are trying to use the stored energy in overhead water tank for power generation. Solar and Wind energy will contribute major part of power generation. Generated power will be stored in the battery which sources power to inverter and inverter to load. It gives us multiple sources of energy and also helps us to recover some amount of energy which is stored in overhead water tank.
Homeowners Adding Grid Soila Photvoltaic Systems
Cindy is considering starting a business installing solar panels and is seeking advice. Solar panel installation could be a profitable business opportunity as consumers are increasingly concerned about the environment and want to reduce energy costs. However, there are also risks involved that Cindy needs to consider carefully. Studies show solar power will likely supply a larger portion of electricity demand in the future as costs decrease further. Government incentives can also impact the financial analysis of installing solar panels.
Neura26
This document discusses recent trends in solar energy. It begins by introducing renewable energy sources and focusing on solar energy. It then discusses different types of solar power generation technologies, including concentrated solar and photovoltaic plants. Concentrated solar power plants use solar energy to heat a fluid and generate electricity, while photovoltaic plants directly convert sunlight to electricity using solar cells. The document also discusses the advantages and disadvantages of solar energy applications as well as ongoing canal-top solar power projects in India that generate electricity while conserving water and land. In conclusion, it encourages the use of renewable energy sources like solar for the future.
Essay On Load Shedding
This document discusses different types of wind generators that can be used for wind power generation. It describes squirrel cage induction generators and doubly fed induction generators that are suitable for constant and variable speed turbines respectively. It also discusses permanent magnet synchronous generators that are suitable for variable speed turbines. The document provides details on induction generators, their advantages of being well-established technology and disadvantages of requiring reactive power compensation. It describes squirrel cage induction generators as the most common due to simplicity and costs but having limitations in power conversion from wind.
Renewable Energy, 07 29 09
The most vital way to take care of our lives is to take the responsibility of our own energy foot print.
Renewable energy plays an important role in the supply of energy. When renewable energy sources are used, the demand for fossil fuels is reduced. Unlike fossil fuels, non-biomass renewable sources of energy (photovoltaics, wind, hydropower, and geothermal) do not directly emit greenhouse gases.
Renewable energy is energy generated from natural resources such as : sunlight, wind, tides, and geothermal heat which are renewable (naturally replenished).
The use of renewable energy is not new. More than 150 years ago wood, which is one form of biomass, supplied up to 90 percent of the energy needs. e.
Now over half of renewable energy goes to producing electricity.
solar windmill final
This document is a report analyzing the design of a solar windmill system with two configurations. The first configuration places photovoltaic (PV) panels on the tower structure of a wind turbine to generate electricity from both wind and solar energy. The second configuration covers wind turbine blades with thin film PV to harness unused solar energy and provide excitation voltage to the generator or battery storage. MATLAB analysis demonstrated the feasibility of these hybrid PV systems. Experimental testing was conducted under various irradiance levels and rotational speeds to derive a relationship between output power and speed for a solar PV mounted turbine.
GREEN ENERGY ELECTRIC POWER CONVERTER
THIS REPORT IS BASED ON THE GREEN ENERGY ELECTRIC POWER CONVERTER AND THIS REPORT IS PREPARED ON THE BASE OF FORMAT WHICH IS STANDARD AND THIS REPORT ALSO CONTAINS DIFFERENT ENERGY SOURCES WHICH IS RENEWABLE SOURCES SO THIS USEFUL FOR ENGINEERING STUDENTS
Recommended
Hybrid wind solar energy system
The document discusses a hybrid wind/solar energy system that allows the two intermittent energy sources to supply power separately or together through a new rectifier configuration. It notes the disadvantages of relying solely on solar or wind energy alone due to unpredictability, but explains how combining the two sources into a hybrid system and using maximum power point tracking algorithms can significantly improve the reliability and efficiency of power transfer.
Design of Hybrid Power Plant for Smart City
Energy crisis are of special attention now-a-days. In this project presents a new system configuration of the front-end rectifier stage for a hybrid Hydro/wind/photovoltaic energy system. This system allows the three sources to supply the load separately or simultaneously depending on the availability of the energy sources. In household power generation wind and solar are the general hybrid energy options, which are used. But the overhead water tank is one of the neglected energy generation sources which are available in normal household and commercial places. In today’s world each and every source of energy has to be utilized. Therefore we are trying to use the stored energy in overhead water tank for power generation. Solar and Wind energy will contribute major part of power generation. Generated power will be stored in the battery which sources power to inverter and inverter to load. It gives us multiple sources of energy and also helps us to recover some amount of energy which is stored in overhead water tank.
Homeowners Adding Grid Soila Photvoltaic Systems
Cindy is considering starting a business installing solar panels and is seeking advice. Solar panel installation could be a profitable business opportunity as consumers are increasingly concerned about the environment and want to reduce energy costs. However, there are also risks involved that Cindy needs to consider carefully. Studies show solar power will likely supply a larger portion of electricity demand in the future as costs decrease further. Government incentives can also impact the financial analysis of installing solar panels.
Neura26
This document discusses recent trends in solar energy. It begins by introducing renewable energy sources and focusing on solar energy. It then discusses different types of solar power generation technologies, including concentrated solar and photovoltaic plants. Concentrated solar power plants use solar energy to heat a fluid and generate electricity, while photovoltaic plants directly convert sunlight to electricity using solar cells. The document also discusses the advantages and disadvantages of solar energy applications as well as ongoing canal-top solar power projects in India that generate electricity while conserving water and land. In conclusion, it encourages the use of renewable energy sources like solar for the future.
Essay On Load Shedding
This document discusses different types of wind generators that can be used for wind power generation. It describes squirrel cage induction generators and doubly fed induction generators that are suitable for constant and variable speed turbines respectively. It also discusses permanent magnet synchronous generators that are suitable for variable speed turbines. The document provides details on induction generators, their advantages of being well-established technology and disadvantages of requiring reactive power compensation. It describes squirrel cage induction generators as the most common due to simplicity and costs but having limitations in power conversion from wind.
Renewable Energy, 07 29 09
The most vital way to take care of our lives is to take the responsibility of our own energy foot print.
Renewable energy plays an important role in the supply of energy. When renewable energy sources are used, the demand for fossil fuels is reduced. Unlike fossil fuels, non-biomass renewable sources of energy (photovoltaics, wind, hydropower, and geothermal) do not directly emit greenhouse gases.
Renewable energy is energy generated from natural resources such as : sunlight, wind, tides, and geothermal heat which are renewable (naturally replenished).
The use of renewable energy is not new. More than 150 years ago wood, which is one form of biomass, supplied up to 90 percent of the energy needs. e.
Now over half of renewable energy goes to producing electricity.
solar windmill final
This document is a report analyzing the design of a solar windmill system with two configurations. The first configuration places photovoltaic (PV) panels on the tower structure of a wind turbine to generate electricity from both wind and solar energy. The second configuration covers wind turbine blades with thin film PV to harness unused solar energy and provide excitation voltage to the generator or battery storage. MATLAB analysis demonstrated the feasibility of these hybrid PV systems. Experimental testing was conducted under various irradiance levels and rotational speeds to derive a relationship between output power and speed for a solar PV mounted turbine.
GREEN ENERGY ELECTRIC POWER CONVERTER
THIS REPORT IS BASED ON THE GREEN ENERGY ELECTRIC POWER CONVERTER AND THIS REPORT IS PREPARED ON THE BASE OF FORMAT WHICH IS STANDARD AND THIS REPORT ALSO CONTAINS DIFFERENT ENERGY SOURCES WHICH IS RENEWABLE SOURCES SO THIS USEFUL FOR ENGINEERING STUDENTS
Hybrid power generation by solar –wind
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
SPACE VECTOR MODULATION BASED INDUCTION MOTOR DRIVE
This paper describes an analysis of local PV-wind hybrid systems for supplying electricity to a private house, farmhouse or a small company with electrical power depending on the need at the site. The major system components, work principle and specific working condition are presented in this paper
REACTION-PAPER.pdf
This document discusses solar energy and hydropower energy. For solar energy, it explains that solar energy is created through nuclear fusion in the sun and is harnessed using photovoltaic cells to generate electricity. It notes the environmental and economic benefits of solar energy, as well as technological advancements that have increased its viability. For hydropower energy, it describes how hydropower harnesses the kinetic energy of flowing water through turbines to generate electricity. It discusses the types of hydropower systems and provides examples of hydropower plants in the Philippines. It outlines the environmental, economic, and reliability benefits of hydropower, as well as some disadvantages related to environmental impacts and high construction costs.
S01231117120
This document discusses hybrid renewable energy systems and their suitability for rural regions in India. It notes that about 75% of India's population lives in rural areas that often face electricity shortages, hindering development. Hybrid systems that combine two or more renewable sources like biomass, wind, solar, and hydro could help address this issue by providing a more reliable supply. The document outlines several hybrid system examples and notes their advantages like increased reliability, flexibility, and lower operating costs compared to individual renewable systems. However, hybrid systems also present challenges like complex power conditioning, stochastic resource availability, and coordination with electric grids.
Solar energy harvesting and its applications
This document discusses solar energy harvesting. It begins by defining solar energy harvesting as the process of capturing and storing solar energy radiated from the sun, and converting it to electrical energy. It then discusses why solar energy harvesting is needed, as the sun provides vast amounts of renewable energy, and fossil fuels are limited. Various methods of solar energy harvesting are outlined, including solar thermal collectors, concentrating solar power, and photovoltaic technology. Recent innovations in solar energy harvesting are also summarized, such as mimicking butterfly wings to increase panel efficiency and developing spherical solar generators. Applications like solar roadways and powering electric vehicles are also mentioned.
Dc House An Alternate Solution for Rural Electrification
This document describes an alternate solution for rural electrification using a hybrid energy system that combines solar and wind power. It discusses the current over-reliance on depleting fossil fuels in India and the need for sustainable energy sources. The proposed system uses solar panels to convert solar energy and a wind turbine to convert wind energy into electricity. This hybrid approach provides continuous power generation as one source can compensate when the other is not producing energy. It details the components of the system including solar panels, wind turbine, dynamo, charge controller and batteries. The system aims to provide affordable, reliable electricity for rural areas without environmental damage.
Final solar agro sprayer
This document provides an introduction and overview of solar energy and solar power sprayers. It discusses the need for non-conventional energy sources given depleting fossil fuel reserves. Solar energy can be captured directly through solar photovoltaic cells or indirectly through processes like wind and hydroelectric power. A solar power sprayer uses photovoltaic panels to charge a battery and power an electric motor that rotates the sprayer pump, avoiding the need for gasoline. The document outlines the construction, components, design considerations, advantages and applications of solar power sprayers.
Solar
1) The document discusses future trends in solar energy, noting that India faces energy problems and must develop renewable sources like solar.
2) It explains different types of solar power generation including concentrated solar plants that use mirrors to heat fluid and solar photovoltaic plants that directly convert sunlight to electricity using solar cells.
3) Canal-top solar power plants are highlighted as an innovative way to generate electricity from solar panels placed over canals, saving land and reducing evaporation.
SOLAR PV-WIND HYBRID POWER GENERATION SYSTEM
This document describes a solar PV-wind hybrid power generation system. It discusses how renewable energy sources like solar and wind have grown but still produce less energy than fossil fuels. A hybrid system is proposed to combine solar and wind power sources to provide a more reliable supply since the sun and wind are intermittent. The system would include photovoltaic solar panels, a wind turbine, batteries, an inverter, and microcontroller to store and convert the power for residential or small-scale use.
Ac Hybrid Charge Controller
One of the primary needs for socio-economic development in any nation in the world is the provision of reliable electricity supply systems with lower carbon footprint levels. The purpose of this work is the development of a hybrid Power system that harnesses the renewable energy in sun and electricity to generate electricity. The working model can able to run on dual mode- solar and electricity. It can also be driven independently either by solar or electricity. The battery can be charge from solar panel (40W) or by power supply. The household single phase A.C. power supply of 230V is converted into 12V D.C. using step down transformer and rectifying circuit. The working model can achieve energy saving, low carbon emission, environmental protection for the upcoming future of human life.
Power generation through solar trains
This document discusses a proposed "Solar Train" project that would utilize solar energy to power railways. It begins with an introduction to global warming and renewable energy. The main points covered include:
- Solar panels on train roofs would convert solar energy to electricity to power the trains.
- Challenges include the costs of solar technologies and their intermittent nature. Improving efficiency and lowering costs is important.
- Implementing techniques like nanotechnology may increase solar cell efficiency.
- Utilizing solar energy could help reduce environmental impacts compared to fossil fuels and preserve other energy sources.
Implementation of Hybrid Generation Power System in Pakistan
A solar-wind hybrid power generation system has been presented here. The application based system illustrated in this paper is designed on the basis of the solar and wind data for Pakistan. The power generated by the system is intended for domestic use. The most common source of unconventional power in homes is battery based UPS (Uninterrupted power supply) inverter. The UPS inverter charges the battery with conventional grid power. This system will charge the battery of UPS inverter by using only wind and solar power, which will make the system cost effective and more reliable. The reason for using both solar and wind is that recent studies have proven that combined system can be more productive and consistent and other thing is that neither of them can be used for continuous power generation. In the system illustrated in this paper the solar-wind system provides power periodically which is controlled by electronic methods and a microcontroller is used to monitor the power from both the inputs. The switching action is provided from the microcontroller to the battery charging based on the power received from solar photovoltaic panel and wind generators. In this paper, an efficient system has been presented comprising of solar panel, wind generator, charge controller and charge storage unit (battery). Solar panel is selected as the main input and the wind resource will be used only in the absence of the solar photovoltaic (PV) output.
ME5620 Renewable Energy Systems For The Built Environment.docx
The document discusses various renewable energy sources including solar energy, wind energy, hydroelectric energy, and tidal energy. It provides details on how each works, advantages and disadvantages, and examples of storage systems. It then summarizes potential adaptations and developments of solar and wind energy. Finally, it provides an example design for a 5kW solar energy system for a 3 bedroom house in London, including required equipment and load consumption calculations.
REPORT OF FOOT STEP POWER GENERATION PROJECT
1. The document discusses renewable energy sources and introduces a device that can generate electricity from kinetic energy of human footsteps. It works by converting the downward force of a step on a plate into rotational motion of a shaft connected to an alternator.
2. The main components of the device are described, including a battery to store the generated electricity, springs to return the plate to its original position, gears and a belt/pulley system to rotate the alternator shaft, and an LED light that lights up when powered by the device.
3. The need for developing non-conventional renewable energy sources is explained, as fossil fuel reserves are limited and cause environmental problems. Generating electricity from human footsteps is a
Hybrid Power Generation System. Hybrid Power Generation System. Hybrid Power ...
The document summarizes a research paper on a hybrid solar-wind power generation system. It discusses that renewable energy sources like solar and wind are considered clean alternatives for generating electricity. It then presents a system that harnesses energy from both the sun and wind using solar panels, a wind turbine, batteries, a microcontroller, inverter and other components to supply power reliably. The system is suitable for powering homes, businesses and other applications, especially in remote areas not connected to the electric grid. It improves efficiency over using solar and wind individually.
“SIMULATION ON OPTIMISATION OF POWER QUALITY USING HYBRID POWER SYSTEM”
This document presents a simulation study on optimizing power quality in a hybrid power system comprising hydro and solar photovoltaic energy sources. The study was conducted by students from the Department of Electrical Engineering at RIT Karnataka, India. The simulation aimed to ensure reliable power supply by combining renewable energy sources and address power quality issues like voltage sags caused by faults. MATLAB/Simulink was used to model a hybrid system with a hydro turbine and solar PV array supplying power to a three-phase load. Maximum power point tracking controllers were used to optimize output from each source. A dynamic voltage restorer scheme was also tested to compensate for voltage sags and improve power quality. The results demonstrated effective power generation from the hybrid system
Solar Water Pump
Solar powered water pumping systems have become the interest of many people in the recent years. Acknowledging that nature has provided a bounty of energy which can be converted into electrical energy has created innovative ways of discovering materials that can be used to make a system that supports turning heat into electricity. In this regard, the paper presented different concepts that relate to how the whole energy creation process is done and discusses useful ways of turning heat into useful energy. Furthermore, the recommendations dictate that while advancements in the technology are given attention, the issue of the investment cost and how it will thrive in the market is still a question. Nevertheless, many developing and developed countries continue to express interest in this area, and most are actively using and exploring how solar power can be used in other ways. Photovoltaic systems which are used to pump water for people, livestock and plants are an important move for technology and use of solar energy. Pumping water system using this PV technology has shown that is simple and that it does not require a lot of maintenance. In this regard, the idea gained the interest of farmers whose main concern is providing sufficient water not only for themselves but also for their plants and crops and livestock. The only major difference to this is that the system relies on solar energy as a power source for the pumps.
Simulation Model for 3 Phase, 3 Wire Grid Connected System using Hybrid PV Wi...
Due to rising energy demand and diminishing fossil fuel supplies, the quest for renewable energy sources has gained momentum. As a result, researchers have been more interested in harnessing renewable energy sources like sun and wind to create long term, reliable sources of energy. The purpose of this article is to discuss long term solutions for supplying electricity to outlying locations. The framework of a hybrid system is presented in this study. The suggested setup is a hybrid of solar photovoltaics PV and a wind turbine using a Doubly Fed Induction Generator DFIG . The Maximum Power Point Tracking MPPT technology is used in solar panels to increase output. There are two controllers on the DFIG one for the rotors and one for the grid. The inverter AC DC AC is implemented using the vector control approach, and both the rotor side converter and the grid side converter may generate or observe reactive power, as well as regulate the DC link voltage. This study uses MATLAB Simulink to describe a PV wind system that is linked to an existing power infrastructure. This paper explains how to simulate a PV wind hybrid system on three phase power networks. An explanation of the simulation findings for a range of irradiance and wind speeds is provided as well. Kishan Tiwari | Manish Kethoriya "Simulation Model for 3-Phase, 3-Wire Grid Connected System using Hybrid PV-Wind Energy Conversion" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-1 , February 2023, URL: https://www.ijtsrd.com/papers/ijtsrd52630.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/52630/simulation-model-for-3phase-3wire-grid-connected-system-using-hybrid-pvwind-energy-conversion/kishan-tiwari
Renewable Energy, 03 2 2011
Possible to Probable: New renewable energy technologies are becoming a more feasible option for businesses.
Solar energy presentation
Solar energy is obtained from solar radiation and is a renewable source of energy. It is used to generate electricity through photovoltaic cells and for heating applications. Less than 1% of energy worldwide currently comes from solar, but its use is growing. The main types of solar technologies are photovoltaics and concentrating solar power. Solar energy has advantages of being clean and having low maintenance costs, but also has disadvantages such as high initial costs and reliance on weather conditions. Ethiopia has potential to generate over 60,000 MW from solar and other renewable sources.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
More Related Content
Similar to hybridwind-solarenergysystem-120907123454-phpapp02.pdf
Hybrid power generation by solar –wind
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
SPACE VECTOR MODULATION BASED INDUCTION MOTOR DRIVE
This paper describes an analysis of local PV-wind hybrid systems for supplying electricity to a private house, farmhouse or a small company with electrical power depending on the need at the site. The major system components, work principle and specific working condition are presented in this paper
REACTION-PAPER.pdf
This document discusses solar energy and hydropower energy. For solar energy, it explains that solar energy is created through nuclear fusion in the sun and is harnessed using photovoltaic cells to generate electricity. It notes the environmental and economic benefits of solar energy, as well as technological advancements that have increased its viability. For hydropower energy, it describes how hydropower harnesses the kinetic energy of flowing water through turbines to generate electricity. It discusses the types of hydropower systems and provides examples of hydropower plants in the Philippines. It outlines the environmental, economic, and reliability benefits of hydropower, as well as some disadvantages related to environmental impacts and high construction costs.
S01231117120
This document discusses hybrid renewable energy systems and their suitability for rural regions in India. It notes that about 75% of India's population lives in rural areas that often face electricity shortages, hindering development. Hybrid systems that combine two or more renewable sources like biomass, wind, solar, and hydro could help address this issue by providing a more reliable supply. The document outlines several hybrid system examples and notes their advantages like increased reliability, flexibility, and lower operating costs compared to individual renewable systems. However, hybrid systems also present challenges like complex power conditioning, stochastic resource availability, and coordination with electric grids.
Solar energy harvesting and its applications
This document discusses solar energy harvesting. It begins by defining solar energy harvesting as the process of capturing and storing solar energy radiated from the sun, and converting it to electrical energy. It then discusses why solar energy harvesting is needed, as the sun provides vast amounts of renewable energy, and fossil fuels are limited. Various methods of solar energy harvesting are outlined, including solar thermal collectors, concentrating solar power, and photovoltaic technology. Recent innovations in solar energy harvesting are also summarized, such as mimicking butterfly wings to increase panel efficiency and developing spherical solar generators. Applications like solar roadways and powering electric vehicles are also mentioned.
Dc House An Alternate Solution for Rural Electrification
This document describes an alternate solution for rural electrification using a hybrid energy system that combines solar and wind power. It discusses the current over-reliance on depleting fossil fuels in India and the need for sustainable energy sources. The proposed system uses solar panels to convert solar energy and a wind turbine to convert wind energy into electricity. This hybrid approach provides continuous power generation as one source can compensate when the other is not producing energy. It details the components of the system including solar panels, wind turbine, dynamo, charge controller and batteries. The system aims to provide affordable, reliable electricity for rural areas without environmental damage.
Final solar agro sprayer
This document provides an introduction and overview of solar energy and solar power sprayers. It discusses the need for non-conventional energy sources given depleting fossil fuel reserves. Solar energy can be captured directly through solar photovoltaic cells or indirectly through processes like wind and hydroelectric power. A solar power sprayer uses photovoltaic panels to charge a battery and power an electric motor that rotates the sprayer pump, avoiding the need for gasoline. The document outlines the construction, components, design considerations, advantages and applications of solar power sprayers.
Solar
1) The document discusses future trends in solar energy, noting that India faces energy problems and must develop renewable sources like solar.
2) It explains different types of solar power generation including concentrated solar plants that use mirrors to heat fluid and solar photovoltaic plants that directly convert sunlight to electricity using solar cells.
3) Canal-top solar power plants are highlighted as an innovative way to generate electricity from solar panels placed over canals, saving land and reducing evaporation.
SOLAR PV-WIND HYBRID POWER GENERATION SYSTEM
This document describes a solar PV-wind hybrid power generation system. It discusses how renewable energy sources like solar and wind have grown but still produce less energy than fossil fuels. A hybrid system is proposed to combine solar and wind power sources to provide a more reliable supply since the sun and wind are intermittent. The system would include photovoltaic solar panels, a wind turbine, batteries, an inverter, and microcontroller to store and convert the power for residential or small-scale use.
Ac Hybrid Charge Controller
One of the primary needs for socio-economic development in any nation in the world is the provision of reliable electricity supply systems with lower carbon footprint levels. The purpose of this work is the development of a hybrid Power system that harnesses the renewable energy in sun and electricity to generate electricity. The working model can able to run on dual mode- solar and electricity. It can also be driven independently either by solar or electricity. The battery can be charge from solar panel (40W) or by power supply. The household single phase A.C. power supply of 230V is converted into 12V D.C. using step down transformer and rectifying circuit. The working model can achieve energy saving, low carbon emission, environmental protection for the upcoming future of human life.
Power generation through solar trains
This document discusses a proposed "Solar Train" project that would utilize solar energy to power railways. It begins with an introduction to global warming and renewable energy. The main points covered include:
- Solar panels on train roofs would convert solar energy to electricity to power the trains.
- Challenges include the costs of solar technologies and their intermittent nature. Improving efficiency and lowering costs is important.
- Implementing techniques like nanotechnology may increase solar cell efficiency.
- Utilizing solar energy could help reduce environmental impacts compared to fossil fuels and preserve other energy sources.
Implementation of Hybrid Generation Power System in Pakistan
A solar-wind hybrid power generation system has been presented here. The application based system illustrated in this paper is designed on the basis of the solar and wind data for Pakistan. The power generated by the system is intended for domestic use. The most common source of unconventional power in homes is battery based UPS (Uninterrupted power supply) inverter. The UPS inverter charges the battery with conventional grid power. This system will charge the battery of UPS inverter by using only wind and solar power, which will make the system cost effective and more reliable. The reason for using both solar and wind is that recent studies have proven that combined system can be more productive and consistent and other thing is that neither of them can be used for continuous power generation. In the system illustrated in this paper the solar-wind system provides power periodically which is controlled by electronic methods and a microcontroller is used to monitor the power from both the inputs. The switching action is provided from the microcontroller to the battery charging based on the power received from solar photovoltaic panel and wind generators. In this paper, an efficient system has been presented comprising of solar panel, wind generator, charge controller and charge storage unit (battery). Solar panel is selected as the main input and the wind resource will be used only in the absence of the solar photovoltaic (PV) output.
ME5620 Renewable Energy Systems For The Built Environment.docx
The document discusses various renewable energy sources including solar energy, wind energy, hydroelectric energy, and tidal energy. It provides details on how each works, advantages and disadvantages, and examples of storage systems. It then summarizes potential adaptations and developments of solar and wind energy. Finally, it provides an example design for a 5kW solar energy system for a 3 bedroom house in London, including required equipment and load consumption calculations.
REPORT OF FOOT STEP POWER GENERATION PROJECT
1. The document discusses renewable energy sources and introduces a device that can generate electricity from kinetic energy of human footsteps. It works by converting the downward force of a step on a plate into rotational motion of a shaft connected to an alternator.
2. The main components of the device are described, including a battery to store the generated electricity, springs to return the plate to its original position, gears and a belt/pulley system to rotate the alternator shaft, and an LED light that lights up when powered by the device.
3. The need for developing non-conventional renewable energy sources is explained, as fossil fuel reserves are limited and cause environmental problems. Generating electricity from human footsteps is a
Hybrid Power Generation System. Hybrid Power Generation System. Hybrid Power ...
The document summarizes a research paper on a hybrid solar-wind power generation system. It discusses that renewable energy sources like solar and wind are considered clean alternatives for generating electricity. It then presents a system that harnesses energy from both the sun and wind using solar panels, a wind turbine, batteries, a microcontroller, inverter and other components to supply power reliably. The system is suitable for powering homes, businesses and other applications, especially in remote areas not connected to the electric grid. It improves efficiency over using solar and wind individually.
“SIMULATION ON OPTIMISATION OF POWER QUALITY USING HYBRID POWER SYSTEM”
This document presents a simulation study on optimizing power quality in a hybrid power system comprising hydro and solar photovoltaic energy sources. The study was conducted by students from the Department of Electrical Engineering at RIT Karnataka, India. The simulation aimed to ensure reliable power supply by combining renewable energy sources and address power quality issues like voltage sags caused by faults. MATLAB/Simulink was used to model a hybrid system with a hydro turbine and solar PV array supplying power to a three-phase load. Maximum power point tracking controllers were used to optimize output from each source. A dynamic voltage restorer scheme was also tested to compensate for voltage sags and improve power quality. The results demonstrated effective power generation from the hybrid system
Solar Water Pump
Solar powered water pumping systems have become the interest of many people in the recent years. Acknowledging that nature has provided a bounty of energy which can be converted into electrical energy has created innovative ways of discovering materials that can be used to make a system that supports turning heat into electricity. In this regard, the paper presented different concepts that relate to how the whole energy creation process is done and discusses useful ways of turning heat into useful energy. Furthermore, the recommendations dictate that while advancements in the technology are given attention, the issue of the investment cost and how it will thrive in the market is still a question. Nevertheless, many developing and developed countries continue to express interest in this area, and most are actively using and exploring how solar power can be used in other ways. Photovoltaic systems which are used to pump water for people, livestock and plants are an important move for technology and use of solar energy. Pumping water system using this PV technology has shown that is simple and that it does not require a lot of maintenance. In this regard, the idea gained the interest of farmers whose main concern is providing sufficient water not only for themselves but also for their plants and crops and livestock. The only major difference to this is that the system relies on solar energy as a power source for the pumps.
Simulation Model for 3 Phase, 3 Wire Grid Connected System using Hybrid PV Wi...
Due to rising energy demand and diminishing fossil fuel supplies, the quest for renewable energy sources has gained momentum. As a result, researchers have been more interested in harnessing renewable energy sources like sun and wind to create long term, reliable sources of energy. The purpose of this article is to discuss long term solutions for supplying electricity to outlying locations. The framework of a hybrid system is presented in this study. The suggested setup is a hybrid of solar photovoltaics PV and a wind turbine using a Doubly Fed Induction Generator DFIG . The Maximum Power Point Tracking MPPT technology is used in solar panels to increase output. There are two controllers on the DFIG one for the rotors and one for the grid. The inverter AC DC AC is implemented using the vector control approach, and both the rotor side converter and the grid side converter may generate or observe reactive power, as well as regulate the DC link voltage. This study uses MATLAB Simulink to describe a PV wind system that is linked to an existing power infrastructure. This paper explains how to simulate a PV wind hybrid system on three phase power networks. An explanation of the simulation findings for a range of irradiance and wind speeds is provided as well. Kishan Tiwari | Manish Kethoriya "Simulation Model for 3-Phase, 3-Wire Grid Connected System using Hybrid PV-Wind Energy Conversion" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-1 , February 2023, URL: https://www.ijtsrd.com/papers/ijtsrd52630.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/52630/simulation-model-for-3phase-3wire-grid-connected-system-using-hybrid-pvwind-energy-conversion/kishan-tiwari
Renewable Energy, 03 2 2011
Possible to Probable: New renewable energy technologies are becoming a more feasible option for businesses.
Solar energy presentation
Solar energy is obtained from solar radiation and is a renewable source of energy. It is used to generate electricity through photovoltaic cells and for heating applications. Less than 1% of energy worldwide currently comes from solar, but its use is growing. The main types of solar technologies are photovoltaics and concentrating solar power. Solar energy has advantages of being clean and having low maintenance costs, but also has disadvantages such as high initial costs and reliance on weather conditions. Ethiopia has potential to generate over 60,000 MW from solar and other renewable sources.
Similar to hybridwind-solarenergysystem-120907123454-phpapp02.pdf (20)
SPACE VECTOR MODULATION BASED INDUCTION MOTOR DRIVE
SPACE VECTOR MODULATION BASED INDUCTION MOTOR DRIVE
Dc House An Alternate Solution for Rural Electrification
Dc House An Alternate Solution for Rural Electrification
Implementation of Hybrid Generation Power System in Pakistan
Implementation of Hybrid Generation Power System in Pakistan
ME5620 Renewable Energy Systems For The Built Environment.docx
ME5620 Renewable Energy Systems For The Built Environment.docx
Hybrid Power Generation System. Hybrid Power Generation System. Hybrid Power ...
Hybrid Power Generation System. Hybrid Power Generation System. Hybrid Power ...
“SIMULATION ON OPTIMISATION OF POWER QUALITY USING HYBRID POWER SYSTEM”
“SIMULATION ON OPTIMISATION OF POWER QUALITY USING HYBRID POWER SYSTEM”
Simulation Model for 3 Phase, 3 Wire Grid Connected System using Hybrid PV Wi...
Simulation Model for 3 Phase, 3 Wire Grid Connected System using Hybrid PV Wi...
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
hybridwind-solarenergysystem-120907123454-phpapp02.pdf
- 1. GUIDED BY Mr. V. Chaitanya Prasad (M-Tech) Asst.Prof. PRESENTED BY K. Hari Kishore
- 2. Abstract Abstract This project presents a new system configuration of the front-end rectifier stage for a hybrid wind/solar energy system. This configuration allows the two sources to supply the load separately or simultaneously depending on the availability of the energy sources.
- 3. In Search of Environmental friendly In Search of Environmental friendly & Sustainable energy sources & Sustainable energy sources Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. With increasing concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Other than hydro power, wind and photovoltaic energy holds the most potential to meet our energy demands.
- 4. Introduction to Solar Energy Introduction to Solar Energy Solar Energy was invented many years back with a piece of shiny metal which can reflect sunrays, it satisfied the basic need of cooking and heating in ancient days. In modern days it is being used in many ways by converting the solar energy to electrical energy with a Solar Panel
- 5. Working of Solar Panel Working of Solar Panel
- 6. Disadvantages of Solar Energy Disadvantages of Solar Energy Solar Energy is present throughout the day but the solar irradiation levels vary due to sun intensity and unpredictable shadows cast by clouds, birds, trees, etc. This made the concept of solar energy an unreliable one and less used
- 7. Introduction to Wind Energy Introduction to Wind Energy Wind is also a form of solar energy. Winds are caused by the uneven heating of the atmosphere by the sun. Wind flow patterns are modified by the earth’s terrain, bodies of water and vegetation. Wind turbines are used to grab this wind to rotate themselves and thus convert the kinetic energy in the wind into mechanical and then to electrical by rotating alternators which are connected internally
- 8. Working of Wind Turbines Working of Wind Turbines
- 9. Disadvantages of Wind Energy Disadvantages of Wind Energy Wind Energy is capable of supplying large amounts of power but its presence is highly unpredictable as it can be here one moment and gone in another. This made the concept of wind energy an unreliable one and less used
- 10. Introduction to Hybrid Wind-Solar Introduction to Hybrid Wind-Solar Energy System Energy System The common inherent drawback of wind and photovoltaic systems are their intermittent natures that make them unreliable. However, by combining these two intermittent sources and by incorporating maximum power point tracking (MPPT) algorithms, the system’s power transfer efficiency and reliability can be improved significantly.
- 11. Block Diagram of Hybrid Wind- Block Diagram of Hybrid Wind- Solar Energy System Solar Energy System
- 12. Maximum Power Point Tracking Maximum Power Point Tracking (MPPT) (MPPT)
- 13. Advantage Advantage Low operating cost Easy to charge High power quality
- 14. Applications Applications Distributed Generation Applications, Constant Speed and Variable Speed Wind Energy Conversion Systems, Photovoltaic Energy System .
- 15. Conclusion Conclusion By combining the two intermittent sources of Wind and Solar and by incorporating maximum power point tracking (MPPT) algorithms, the system’s power transfer efficiency and reliability can be improved significantly.