Htr india-products-automotive-noise-suppressor-resistor-hans-english
•
0 likes•6 views
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models between 1K0-10K ohms with tolerances of 20%, 10%, or 5% and lengths ranging from 11-18mm. The resistors are wire wound and able to withstand high voltage pulses, temperature ranges from -40-220C, and short term overloads while maintaining resistance changes below 2%. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
Report
Share
Report
Share
Download to read offline
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
Catalogo de antenas moyano
This document provides specifications for various mobile communication antennas that operate in the CDMA800, GSM900, DCS, PCS and UMTS bands. It lists over 150 antenna models including omnidirectional collinear antennas, directional panel antennas, base station antennas, and tri-band antennas. The document provides technical details like frequency range, gain, beamwidth, power handling, dimensions and other specifications for each antenna model.
dual band gsm booster Dolphin automation & Technology
Mobile Signal Booster For all Network All gsm -Airtel vodafone bsnl mtnl uninor loop smart reliance network tatadocomo all in one
Rsf electronik incremental_rotary_encoder_dg119_specsheet
The document provides technical specifications for an incremental rotary encoder. The encoder has up to 5400 lines per revolution and operates at rotational speeds up to 12,000 rpm. It has an aluminum housing, stainless steel shaft, and IP65 sealing. Electrical data includes support for 5V or 10-30V power supply, 60-200mA power consumption, and 160kHz sampling rate. Dimensions are provided.
Powerwave 7785.00
This document provides specifications for the Powerwave Triple Broadband Antennas. It lists technical details such as frequency ranges from 824-960 MHz and 1710-2170 MHz, a gain of 17.3/15.2 dBi, horizontal beam width of 65 degrees, and dimensions of 2658x280x125mm. It also includes mechanical details like a weight of 27.7kg with brackets, maximum wind speed of 42m/s, and operating temperature range of -40 to +60 degrees Celsius. Electrical specifications include VSWR of 1.5:1, front-to-back ratio above 25dB, and power handling of 300W average per input.
Recommended
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Hans c
1. The document describes noise suppressor resistors called HANS-C series resistors that are used to reduce radio frequency interference in automotive ignition systems.
2. The resistors come in resistance values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. They have minimum inductance of 15uH at 1MHz.
3. The resistors can operate from -40C to 220C, have a temperature coefficient of 150ppm/C, and their resistance changes by less than 1% under high voltage pulse testing.
HTR India - Products - Automotive - Noise Suppressor Resistor - HANS (English)
HANS is a Noise Suppressor Resistor, which is a type of Automotive.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hans/
Catalogo de antenas moyano
This document provides specifications for various mobile communication antennas that operate in the CDMA800, GSM900, DCS, PCS and UMTS bands. It lists over 150 antenna models including omnidirectional collinear antennas, directional panel antennas, base station antennas, and tri-band antennas. The document provides technical details like frequency range, gain, beamwidth, power handling, dimensions and other specifications for each antenna model.
dual band gsm booster Dolphin automation & Technology
Mobile Signal Booster For all Network All gsm -Airtel vodafone bsnl mtnl uninor loop smart reliance network tatadocomo all in one
Rsf electronik incremental_rotary_encoder_dg119_specsheet
The document provides technical specifications for an incremental rotary encoder. The encoder has up to 5400 lines per revolution and operates at rotational speeds up to 12,000 rpm. It has an aluminum housing, stainless steel shaft, and IP65 sealing. Electrical data includes support for 5V or 10-30V power supply, 60-200mA power consumption, and 160kHz sampling rate. Dimensions are provided.
Powerwave 7785.00
This document provides specifications for the Powerwave Triple Broadband Antennas. It lists technical details such as frequency ranges from 824-960 MHz and 1710-2170 MHz, a gain of 17.3/15.2 dBi, horizontal beam width of 65 degrees, and dimensions of 2658x280x125mm. It also includes mechanical details like a weight of 27.7kg with brackets, maximum wind speed of 42m/s, and operating temperature range of -40 to +60 degrees Celsius. Electrical specifications include VSWR of 1.5:1, front-to-back ratio above 25dB, and power handling of 300W average per input.
Allgon dualband antenna specification
This document provides information on Allgon's 2100 MHz dual polarized antennas, including specifications for singleband and dualband antenna models. Key details include antenna gains ranging from 15.5 to 18 dBi, beamwidths of 65 degrees, VSWR and isolation values, mechanical specifications, typical radiation patterns, and filters for 1800/2100 MHz dualband operation.
Rsf electronik incremental_rotary_encoder_dg_ 117_specsheet
The document provides technical specifications for an incremental rotary encoder. It lists details such as the encoder's dimensions, housing material, shaft specifications, maximum rotational speed, operating temperature range, sealing rating, EMC compliance, electrical specifications including supply voltage and power consumption, output signals, sampling rate, and included cable length. It can encode up to 5400 lines per revolution and has a maximum shaft load of 10N axially and 20N radially.
Rutherford 10R1 Data Sheet
Buy the Rutherford 10R1 at JMAC Supply.
https://www.jmac.com/Rutherford_Controls_10R1_p/rutherford-10r1.htm?=slideshare
ComNet FVT81M1 Data Sheet
Buy the ComNet FVT81M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT81M1_p/comnet-fvt81m1.htm?=slideshare
SD 170 EX Series Radios - Maxon Solutions
The Maxon SD-170EX Series is a professional two-way radio designed for wireless applications. It has adjustable power output, a DE9 male connector, BNC antenna connection, and LED status indicator. The die cast aluminum cabinet provides durability in extreme conditions. The radio is available in VHF and UHF bands with 5/1 watt power output and is used globally in applications like security, irrigation, utilities, vehicle tracking, and water treatment.
SR805W Wireless Remote Controller User Manual
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Gt i9505-cover-1
This document provides information on repairing a Samsung GT-I9505 GSM telephone. It includes sections on safety precautions, specifications, product functions, an exploded view and parts list, and a main electrical parts list. The document outlines the phone's technical details and components to support repair and maintenance of the device.
Kathrein 800-10766V01
This document provides product details and purchasing information for the Kathrein 800-10766V01 dual broadband panel antenna. It includes specifications for the antenna and integrated remote control unit (iRCU), mounting accessories, mechanical details, and information on ordering, payment, shipping, warranty and services from the supplier, Launch 3 Telecom.
Rsf electronik incremental_rotary_encoder_ dg_ 116_specsheet
The document provides technical specifications for an incremental rotary encoder. The encoder can detect up to 1500 lines per revolution and has an aluminum housing and stainless steel shaft that can withstand axial loads of 10N and radial loads of 20N. It operates between 0-80 degrees Celsius, has an IP65 sealing rating, and complies with various EMC standards. The encoder can be powered by 5V or 10-30V and has a reference mark and square wave signal outputs that operate at sampling rates of 300kHz at 5V and 160kHz at 10-30V.
Cable Detection Tools - Cable Detection Tools - Cable Detection EZICAT
Cable Detection Tools - Cable Detection Tools - Cable Detection EZICATThorne & Derrick International
The document describes the EziSystem cable avoidance tools, including the EziCAT 100 and EziCAT 200 locators and the EziTrace signal generator. It highlights issues with manually adjusted cable locators, such as missing services due to incorrectly adjusted settings. The EziSystem aims to reduce this risk of human error by automatically setting the EziCATs to full sensitivity mode for initial detection and allowing simple selection of detection modes.POSITECH GSM Fixed Wireless Terminal
Positech Solutions manufactures and supplies GSM FCT products using modern techniques and high quality components. Their GSM FCT offers dynamic echo cancellation, high gain antennas, and easy connections. It provides immediate telephone access, supports multiple users, and can add extra lines quickly. Key features include GSM 900 and 1800 compatibility, a 2 watt transmit power in both bands, and operating in temperatures from -10C to 50C.
ComNet FVT1001M1 Data Sheet
Buy the ComNet FVT1001M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT1001M1_p/comnet-fvt1001m1.htm?=slideshare
Kathrein 800-10765V01
The document provides information about the Kathrein 800-10765V01 antenna, including how to purchase it, payment options, shipping and warranty details. It describes the antenna's specifications and frequency range of 698-894 MHz and 1710-2170 MHz. It also lists related services available from the seller such as repairs, maintenance contracts, and de-installation.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
Hans c - 220519
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
HANS C
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
More Related Content
What's hot
Allgon dualband antenna specification
This document provides information on Allgon's 2100 MHz dual polarized antennas, including specifications for singleband and dualband antenna models. Key details include antenna gains ranging from 15.5 to 18 dBi, beamwidths of 65 degrees, VSWR and isolation values, mechanical specifications, typical radiation patterns, and filters for 1800/2100 MHz dualband operation.
Rsf electronik incremental_rotary_encoder_dg_ 117_specsheet
The document provides technical specifications for an incremental rotary encoder. It lists details such as the encoder's dimensions, housing material, shaft specifications, maximum rotational speed, operating temperature range, sealing rating, EMC compliance, electrical specifications including supply voltage and power consumption, output signals, sampling rate, and included cable length. It can encode up to 5400 lines per revolution and has a maximum shaft load of 10N axially and 20N radially.
Rutherford 10R1 Data Sheet
Buy the Rutherford 10R1 at JMAC Supply.
https://www.jmac.com/Rutherford_Controls_10R1_p/rutherford-10r1.htm?=slideshare
ComNet FVT81M1 Data Sheet
Buy the ComNet FVT81M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT81M1_p/comnet-fvt81m1.htm?=slideshare
SD 170 EX Series Radios - Maxon Solutions
The Maxon SD-170EX Series is a professional two-way radio designed for wireless applications. It has adjustable power output, a DE9 male connector, BNC antenna connection, and LED status indicator. The die cast aluminum cabinet provides durability in extreme conditions. The radio is available in VHF and UHF bands with 5/1 watt power output and is used globally in applications like security, irrigation, utilities, vehicle tracking, and water treatment.
SR805W Wireless Remote Controller User Manual
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Gt i9505-cover-1
This document provides information on repairing a Samsung GT-I9505 GSM telephone. It includes sections on safety precautions, specifications, product functions, an exploded view and parts list, and a main electrical parts list. The document outlines the phone's technical details and components to support repair and maintenance of the device.
Kathrein 800-10766V01
This document provides product details and purchasing information for the Kathrein 800-10766V01 dual broadband panel antenna. It includes specifications for the antenna and integrated remote control unit (iRCU), mounting accessories, mechanical details, and information on ordering, payment, shipping, warranty and services from the supplier, Launch 3 Telecom.
Rsf electronik incremental_rotary_encoder_ dg_ 116_specsheet
The document provides technical specifications for an incremental rotary encoder. The encoder can detect up to 1500 lines per revolution and has an aluminum housing and stainless steel shaft that can withstand axial loads of 10N and radial loads of 20N. It operates between 0-80 degrees Celsius, has an IP65 sealing rating, and complies with various EMC standards. The encoder can be powered by 5V or 10-30V and has a reference mark and square wave signal outputs that operate at sampling rates of 300kHz at 5V and 160kHz at 10-30V.
Cable Detection Tools - Cable Detection Tools - Cable Detection EZICAT
Cable Detection Tools - Cable Detection Tools - Cable Detection EZICATThorne & Derrick International
The document describes the EziSystem cable avoidance tools, including the EziCAT 100 and EziCAT 200 locators and the EziTrace signal generator. It highlights issues with manually adjusted cable locators, such as missing services due to incorrectly adjusted settings. The EziSystem aims to reduce this risk of human error by automatically setting the EziCATs to full sensitivity mode for initial detection and allowing simple selection of detection modes.POSITECH GSM Fixed Wireless Terminal
Positech Solutions manufactures and supplies GSM FCT products using modern techniques and high quality components. Their GSM FCT offers dynamic echo cancellation, high gain antennas, and easy connections. It provides immediate telephone access, supports multiple users, and can add extra lines quickly. Key features include GSM 900 and 1800 compatibility, a 2 watt transmit power in both bands, and operating in temperatures from -10C to 50C.
ComNet FVT1001M1 Data Sheet
Buy the ComNet FVT1001M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT1001M1_p/comnet-fvt1001m1.htm?=slideshare
Kathrein 800-10765V01
The document provides information about the Kathrein 800-10765V01 antenna, including how to purchase it, payment options, shipping and warranty details. It describes the antenna's specifications and frequency range of 698-894 MHz and 1710-2170 MHz. It also lists related services available from the seller such as repairs, maintenance contracts, and de-installation.
What's hot (13)
Rsf electronik incremental_rotary_encoder_dg_ 117_specsheet
Rsf electronik incremental_rotary_encoder_dg_ 117_specsheet
Rsf electronik incremental_rotary_encoder_ dg_ 116_specsheet
Rsf electronik incremental_rotary_encoder_ dg_ 116_specsheet
Cable Detection Tools - Cable Detection Tools - Cable Detection EZICAT
Cable Detection Tools - Cable Detection Tools - Cable Detection EZICAT
Similar to Htr india-products-automotive-noise-suppressor-resistor-hans-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Hans s - 220519
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5%. The resistors are wire wound and made of stainless steel with typical inductance values above 15uH. They are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
HANS - AUTOMOTIVE RESISTIVE DEVICES
NOISE SUPPRESSOR RESISTORS
• Noise suppressor wire wound resistor
• Reduces RFI during electrical discharges on petrol
engines in cars and in scooters / motorcycles.
• ROHS compliant (*).
Hans c - 220519
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
HANS C
This document provides specifications for the HANS-C series of noise suppressor resistors developed for use in automotive ignition systems. The resistors are wire wound and come in resistance values from 1K0 to 10K with tolerances of 20%, 10%, or 5%. They are designed to reduce radio frequency interference caused by electrical discharges in engines. The document lists the mechanical specifications including dimensions and minimum inductance values as well as electrical specifications, performance requirements, and ordering information for the resistors.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS-F - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor values from 1K0 to 10K with tolerances of 20% or 10%. Dimensions and electrical specifications are provided for each including resistance value, operating temperature range, overload tolerance, and resistance change under high voltage pulses. The resistors are intended to reduce radio frequency interference caused by electrical discharges in petrol engines.
HANS - 160123.pdf
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists several resistor models with values from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and help reduce radio frequency interference caused by electrical discharges in car and motorcycle engines. They are designed to operate between -40°C to 220°C and withstand high voltage pulses typical of spark plug systems. The resistors are packaged 2000 per box for use suppressing interference in distributor rotors and spark plug leads.
HANS-S - 160123.pdf
The document describes noise suppressor resistor devices for automotive applications. It provides specifications for 6 resistor models with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound, cylindrical devices intended to reduce radio frequency interference from vehicle ignition systems. They have operating temperatures from -40C to 220C and can withstand short term overloads and high voltage pulses typical of automotive ignition environments.
HHE
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
Hhe
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
HHE
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
Similar to Htr india-products-automotive-noise-suppressor-resistor-hans-english (20)
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english
More from SiddheshPathak3
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcp-english
This document provides information on HCP series ceramic encased wire wound resistors. Key details include:
- They are available in power ratings from 3W to 20W and resistance ranges from 10R to 56K.
- The resistors have an inorganic fire retardant encapsulant and ceramic housing for high temperature operation from -55°C to +275°C.
- They have mechanically crimped and tin plated PCB type terminations for direct mounting to circuit boards.
- Electrical characteristics include voltage ratings calculated as V=PxR, resistance tolerances of ±10% or ±5%, and passing high temperature and humidity reliability tests.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
1. The document describes HTR's HSV series of wire wound resistors encased in ceramic housings.
2. The resistors are available in power ratings from 4W to 17W, resistance values from R04 to 82K, and can be mounted vertically or have cropped leads.
3. The resistors have ceramic housings for fire protection and mechanically crimped termination assemblies.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
This document provides information on low ohm power resistors in an open frame wire type configuration called the OW series. Key details include:
- Power ratings from 1.0W to 1.5W at temperatures from -25°C to -70°C and various standard resistance values from R015 to R16.
- Dimensional specifications and weights for each resistor type as well as derating curves showing load and temperature rise.
- Applications in power supplies, instruments, and current sensing circuits. Resistors are packaged in boxes and cartons for shipping.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistors...
This document provides specifications for HTR current sense resistors in OA and OP series. It lists various models ranging from 0.5W to 5W, their dimensions, resistance ranges, temperature ratings, and other electrical and mechanical characteristics. Temperature rise data is provided for different resistance values at maximum power dissipation. Common applications include power supplies, instruments, and current sensing circuits. Ordering information includes specifying series, type, packaging, resistance value, and tolerance.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistors...
This document provides specifications for HTR current sense resistors in OA and OP series. It lists various models ranging from 0.5W to 5W, their dimensions, resistance ranges, weight, and temperature rise data. The document describes the axial and PCB mounting physical configurations, electrical/environmental characteristics, and typical applications. Ordering information is also provided which includes series, type, packing, resistance value, and tolerance.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
The document describes an open frame, monolithic shunt resistor product line from HTR. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration based on power and resistance requirements.
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
This document describes a series of current sense resistors called OFSC resistors. They are available in 5W and 10W power ratings with resistance values ranging from 0.001 ohm to 0.003 ohm for the 5W version and 0.0004 ohm to 0.003 ohm for the 10W version. The resistors have four termination points to eliminate lead resistance and are coated in flame retardant silicone for protection. They are qualified for use from -55C to 275C and can withstand high overloads and temperature cycling.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
This document describes a ceramic encased current sense resistor product called the HMVL series. It provides key specifications such as power ratings from 2.5W to 15W, resistance ranges from R004 to R20, operating temperature range from -55°C to +275°C, and electrical performance requirements for parameters like resistance tolerance, voltage rating, insulation resistance, and temperature coefficient of resistance. It also lists typical applications, ordering information, and provides dimensions and other details.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
This document describes an alloy resistance element product called the BR series. It is a ceramic encased current sense/low ohm resistor with features like low inductance, fire retardant encapsulant, and tin plated copper terminals. The resistor comes in different power ratings and resistance ranges, and can be mounted in circuit boards. It has electrical and mechanical specifications to withstand conditions like high temperature, humidity, vibration, and more.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-rl-englis...
This document provides information on quartz silica powder fire proof ceramic encased alloy electrical resistance ribbon resistors. It describes the construction as all welded with tinned copper terminals. It provides the specifications for various models ranging from 0.5W to 10W and resistance values from 0.0015 to 80 ohms. It details the dimensions, resistance range, temperature ratings at full power dissipation, and environmental test performance requirements for the resistors. It lists typical applications as current sensing and describes the ordering information format.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
The document describes ceramic encased current sense resistors. The resistors have an alloy electrical resistance ribbon and tinned copper terminals encapsulated in a ceramic housing for fire proofing. They are available in various power ratings from 2.5W to 12W with resistance values from 0.0025 ohms to 20 ohms. The resistors can withstand high temperatures and voltage and are qualified for current sense applications.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-english
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection against moisture, shock, and vibration.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hea-english
This document provides information on HTR's ceramic encased wire wound resistors of the HEA series. Key details include:
- Resistance ranges from 25 ohms to 82k ohms
- Power ratings range from 1W to 17W
- Resistors have a ceramic housing and mechanically crimped termination assembly
- Specifications include operating temperature range, resistance tolerances, insulation resistance, and results of various environmental tests
- Resistors can be supplied in bulk, tape and reel, or tape and ammo packaging configurations
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
This document describes an alloy wire wound resistor element housed in a ceramic or fiberglass substrate with a ceramic housing. It has a flame proof, high temperature design with inorganic fire retardant encapsulant and plated/stainless steel mounting brackets. It provides ratings from 10W to 40W and resistance values from R10 to 68K. It lists specifications for electrical characteristics including tolerance, temperature coefficient, overload rating, and environmental resistance. It provides ordering information and describes typical applications including use where shock and vibration are present.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcv-with-bra...
This document provides information on HTR's ceramic encased wire wound resistors. The resistors come in various power ratings from 1W to 20W and resistance values from R05 to 56K. They have ceramic housings, inorganic fire retardant encapsulants, and mechanically crimped termination assemblies. The resistors offer moisture resistance, high insulation, and low surface temperatures. Dimensions, resistance ranges, and weights are provided for each type. Electrical and environmental characteristics include the operating temperature range, voltage ratings, resistance tolerances, and performance test requirements. Typical applications and ordering information are also included.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english
This document provides information on ceramic encased fusible resistors from the FRC series. The resistors are designed to fuse or blow as a safety measure if subjected to an abnormal spike in voltage or current. They are available in power ratings from 1W to 3W and resistance values from 10R to 750R. The document describes the resistors' construction, electrical and environmental specifications, and ordering information.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsva-english
This document provides information on ceramic encased wire wound resistors. It describes the construction which includes an alloy wire wound element on a heat conducting substrate within a fireproof ceramic housing. It provides specifications for 14 models ranging from 4W to 17W, with resistance values from R04 to 82K ohms. Dimensions, electrical characteristics, and ordering information are given.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-englishHtr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsvau-english
This document provides information on ceramic encased wire wound resistors. It describes the construction which includes an alloy wire wound element on a heat conducting substrate within a fireproof ceramic housing. It provides specifications for 14 models ranging from 4W to 17W, with resistance values from R04 to 82K ohms. Dimensions, electrical characteristics, and applications are outlined, along with ordering information examples.
More from SiddheshPathak3 (20)
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcp-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcp-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsv-english
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistors...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistors...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistors...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistors...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-current-sense-open-frame-resistor-...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-rl-englis...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-rl-englis...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hea-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hea-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hca-english1
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcl-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcv-with-bra...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcv-with-bra...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-frc-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsva-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsva-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsvau-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hsvau-english
Recently uploaded
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Recently uploaded (20)
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Htr india-products-automotive-noise-suppressor-resistor-hans-english
- 1. 1K0 1K125 2K0 5K0 7K5 10K (All in tolerances of 20%, 10% & 5%) AUTOMOTIVE RESISTIVE DEVICES HANS SERIES NOISE SUPPRESSOR RESISTORS • Noise suppressor wire wound resistor • Reduces RFI during electrical discharges on petrol engines in cars and in scooters / motorcycles. • ROHS compliant. e : info@htr-india.com www.htr-india.comRev Date : 22/05/2019 AEC-Q200Qualified
- 2. MECHANICAL SPECIFICATION HTR Type Resistance Value D (max) D1 (+/-0.1) Typical Inductance L (+/-0.3) Min. L (+/-0.3) Max. (mm) (mm) NS 1K0 1K0 11.0 23.7 4.65 4.35 MIN 15 μH (at freq. 1 Mhz) NS 1K125 1K125 11.0 23.7 4.65 4.35 MIN 15 μH (at freq. 1 Mhz) NS 2K0 2K0 11.0 23.7 4.65 4.35 MIN 15 μH (at freq. 1 Mhz) NS 5K0 5K0 11.0 23.7 4.65 4.35 MIN 15 μH (at freq. 1 Mhz) NS 7K5 7K5 15.0 23.7 4.65 4.35 MIN 15 μH (at freq. 1 Mhz) NS 10K 10K 18.0 23.7 4.65 4.35 MIN 15 μH (at freq. 1 Mhz) ELECTRICAL SPECIFICATION Nominal Value : NS 1K0 - 1K0 NS 1K125 - 1K125 NS 2K0 - 2K0 NS 5K0 - 5K0 NS 7K5 - 7K5 NS 10K - 10K Tolerance : ± 20% / ± 10% / ± 5% L AUTOMOTIVE RESISTIVE DEVICES HANS 2. PERFORMANCE REQUIREMENTS PARAMETER REQUIREMENTS Short Term Overload : 5 x Rated Power for 5 sec ΔR – MAX 2% Operating Temperature Range -40°C to 220°C Temperature Co-efficient (Typical) ± 150 ppm / °C High Voltage Pulses At High Frequency : (15 kv to 20 kv continuous pulses – 0.1 sec ON & 0.1 sec OFF in series with spark plug – duration 3 hrs.) ΔR – MAX 1% (Typical) TYPICAL APPLICATIONS : The HANS series has been developed to be introduced in automotive ignition systems to reduce Radio Frequency Interference (RFI), which are caused during electrical discharges on petrol engines in both cars and motorcycles. In order to meet the current legislation in force to reduce these disturbances, the introduction of these Noise Suppressor resistors in the rotor of the distributor or the spark plug leads can ensure compliance. MARKING : NO MARKING PACKING : 2000 pcs / small box of approx size 200 mm x 150 mm x 70 mm. ORDERING INFORMATION Series HTR Type Length Tolerance HANS NS 5K0 18.0 20% e : info@htr-india.com www.htr-india.com Rev Date : 22/05/2019 Length Range “*”Please specify length required